Relevant bibliographies by topics / Vacuum Measurement

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Vacuum Measurement'

Author: Grafiati
Published: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Vacuum Measurement.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Vacuum Measurement"

1

ONO, Masatoshi. "Vacuum Measurement." Journal of the Society of Mechanical Engineers 92, no. 848 (1989): 596–98. http://dx.doi.org/10.1299/jsmemag.92.848_596.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gan, Zhiyin, Dong Lin, Xuefang Wang, Chenggang, Honghai Zhang, and Sheng Liu. "Vacuum measurement on vacuum packaged MEMS devices." Journal of Physics: Conference Series 48 (July 1, 2007): 1429–34. http://dx.doi.org/10.1088/1742-6596/48/1/264.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

de Araujo Duarte, Celso. "A thermocouple vacuum gauge for low vacuum measurement." Vacuum 85, no. 10 (March 2011): 972–74. http://dx.doi.org/10.1016/j.vacuum.2011.02.004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

INAYOSHI, Sakae. "Outgassing Measurement for Vacuum Engineering." Journal of the Vacuum Society of Japan 58, no. 2 (2015): 57–62. http://dx.doi.org/10.3131/jvsj2.58.57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Redhead, P. A. "Measurement of vacuum; 1950–2003." Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 21, no. 5 (September 2003): S1—S6. http://dx.doi.org/10.1116/1.1599871.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Shrivastava*, Shailaj Kumar, and Chandan Shrivastava. "Production, Measurement and Applications of Vacuum Systems." International Journal of Engineering and Advanced Technology 10, no. 3 (February 28, 2021): 155–62. http://dx.doi.org/10.35940/ijeat.c2252.0210321.

Full text
Abstract:
The most common type of vacuum pumps and measuring gauges based on available literature are studied with emphasis on how new research and development will enable the new generation of vacuum technology specially in designing, its operational procedure and applications. The technologies were developed to meet the operational goal which include vacuum chamber structures, compatible materials, specialized vacuum pump and gauges. There are many areas where different vacuum condition is required for conducting experiments therefore modeling of pumping system is on demand. The basic understanding of how and when the particular pumping and measurement system can be applied most effectively and economically is essential. The poor choice of pumping and measurement system will interfere the scientific objectives and may leads to substantial maintenance demands and an unpleasant working environment. The development and fundamental investigation of innovative vacuum techniques for creation and measurement of vacuum used for various applications necessary for the research work to be done in future are presented.
APA, Harvard, Vancouver, ISO, and other styles
7

Fryč, Jiří, Josef Los, Radovan Kukla, and Jan Kudělka. "Vacuum Fluctuation in 2 × 13 Herringbone Milking Parlour in Dependence on Vacuum Control Method." Acta Technologica Agriculturae 18, no. 4 (December 1, 2015): 118–21. http://dx.doi.org/10.1515/ata-2015-0023.

Full text
Abstract:
Abstract Vacuum fluctuation was measured using three different vacuum control methods. Firstly, the use was made of a control valve delivered by the manufacturer; then, an additionally installed frequency converter was used. Lastly, a frequency converter fitted with the stabilisation device prototype was used. First, control sensitivity according to ISO was measured in all the three alternatives. Then, vacuum fluctuation during milking was measured. To conduct the measurements under objectively identified conditions, another measurement was conducted with air feed during milking being replaced with a precisely defined variable flow rate. The conducted measurement confirmed the fact that when the frequency converter is used, vacuum fluctuation in stabilised condition is at the same level as when the control valve is used. If there are sudden changes in flow rate and the frequency converter is used, vacuum fluctuation increases. The proposed stabilisation device prototype can reduce the fluctuation in small milking plant but it is not suitable in large milking parlours.
APA, Harvard, Vancouver, ISO, and other styles
8

Fryč, Jiří, Josef Los, Radovan Kukla, Tomáš Lošák, and Kristina Somerlíková. "Vacuum Fluctuation in a 2×3 Tandem Milking Plant in Dependence on the Vacuum Control Method." Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 64, no. 3 (2016): 775–79. http://dx.doi.org/10.11118/actaun201664030775.

Full text
Abstract:
Vacuum fluctuation was measured using three different vacuum control methods. Firstly, the use was made of a control valve delivered by the manufacturer; then, an additionally installed frequency converter was used. Lastly, a frequency converter fitted with the stabilisation device prototype was used. First, the control sensitivity according to ISO was measured in all three alternatives. Then the vacuum fluctuation during milking was measured. To conduct the measurements under objectively identified conditions, another measurement was conducted with the air feed during milking being replaced with a precisely defined variable flow rate. The conducted measurement confirmed the fact that when the frequency converter is used, the vacuum fluctuation in the stabilised condition is at the same level as when the control valve is used. If there are sudden changes in the flow rate and the frequency converter is used, the vacuum fluctuation increases. The proposed stabilisation device prototype can reduce the fluctuation.
APA, Harvard, Vancouver, ISO, and other styles
9

YOSHIDA, Hajime. "Quantitative Measurement and its Uncertainty on Vacuum Pressure Measurement." Journal of the Vacuum Society of Japan 56, no. 11 (2013): 449–56. http://dx.doi.org/10.3131/jvsj2.56.449.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kuvandykov, R. E. "On the Possibility of Using the Strain-Frequency Method for Measuring the Absolute Gas Pressure in Reference Vacuum Gauges." Measurement Standards. Reference Materials 18, no. 3 (December 30, 2022): 17–28. http://dx.doi.org/10.20915/2077-1177-2022-18-3-17-28.

Full text
Abstract:
An especially important direction in metrological science is ensuring the accuracy of vacuum measurements, which is crucial for industry. In Russia, predominantly foreign vacuum gauges with a vacuum measurement range PNPI – PVPI 0.1–1000 Pa are used as reference vacuum gauges for verification and calibration of vacuum gauges. On the basis of the analysis of the characteristics of reference vacuum gauges used in Russia based on various methods for measuring gas pressure, it can be argued that the most accurate and common measurement method among reference vacuum gauges is the strain method. However, the strain method has a number of limitations associated with the need to introduce the following corrections: correction for the residual pressure in the comparative chamber, correction for the influence of temperature effects during temperature control of the primary measuring transducer. The purpose of this work was to study the compliance of the metrological characteristics of a vacuum gauge based on a new strain-frequency method for measuring the absolute gas pressure with the requirements for reference vacuum gauges given in state verification schemes in the field of vacuum measurements.The main research methods were the study of the metrological characteristics of the strain-frequency vacuum gauge, taking into account the correction for the residual pressure in the comparative chamber; corrections for the influence of temperature effects during temperature control of the primary measuring transducer, as well as for the compliance of the method with the requirements of state verification schemes in the field of vacuum measurements. An assessment of the accuracy indicators of the strain-frequency method for measuring the absolute gas pressure based on the analysis of the measurement equation, taking into account the assessment of the components of the uncertainty sources, is given. The obtained results have shown the possibility of using the strain-frequency method of pressure measurement, with the exception of the correction for the residual pressure in the comparative chamber, corrections for the influence of temperature effects during temperature control of the primary measuring transducer in reference vacuum gauges that meet the requirements of state verification schemes in the field of vacuum measurements.As a result of the study, it was found that the expanded uncertainty of the result of measuring pressure with a vacuum gauge based on the new strain-frequency method does not exceed 2 %. This makes it possible to use this method in reference vacuum gauges.The practical significance of the developed scientific and methodological principles, and technological solutions for calculating and manufacturing the primary measuring transducer of a vacuum gauge based on a new method for measuring low absolute pressure lies in the possibility to manufacture the primary measuring transducer at Russian enterprises using domestic technologies of microsystem technology.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Vacuum Measurement"

1

Hoagland, David Wayne. "Continuous Permeability Measurement During Unidirectional Vacuum Infusion Processing." BYU ScholarsArchive, 2017. https://scholarsarchive.byu.edu/etd/6457.

Full text
Abstract:
Composite materials have traditionally been used in high-end aerospace parts and low-end consumer parts. The reason for this separation in markets is the wide gap in technology between pre-preg materials processed in an autoclave and chop strand fiberglass blown into an open mold. Liquid composite molding has emerged as a bridge between inexpensive tooling and large, technical parts. Processes such as vacuum infusion have made it possible to utilize complex layups of reinforcement materials in an open mold style set-up, creating optimal conditions for composites to penetrate many new markets with rapid innovation. Flow simulation for liquid composite molding is often performed to assist in process optimization, and requires the permeability of the reinforcement to be characterized. For infusion under a flexible membrane, such as vacuum infusion, or for simulation of a part with non-uniform thickness, one must test the permeability at various levels of compaction. This process is time consuming and often relies on interpolation or extrapolation around a few experimental permeability measurements. To accelerate the process of permeability characterization, a small number of methodologies have been previously presented in the literature, in which the permeability may be tested at multiple fiber volume contents in a single test. Some of the methods even measure the permeability over a continuous range of thicknesses, thus requiring no later interpolation of permeability values. A novel method is presented here for the rapid measurement of permeability over a continuous range of fiber volume content, in a single unidirectional vacuum infusion flow experiment. The thickness gradient across the vacuum bag, as well as the fluid pressure at several locations in the mold, were concurrently measured to calculate the fabric compressibility. An analytical flow model, which accounts for the compressibility, is then used by iterating the fitting constant in a permeability model until the predicted flow front progression matches empirical measurement. The method is demonstrated here for two reinforcement materials: 1) a fiberglass unbalanced weave and 2) a carbon bi-ax non-crimped fabric. The standard deviation of calculated permeabilities across the multiple infusion experiments for each material and flow orientation ranged from 12.8% to 29.7%. Validation of these results was performed by comparing the resulting permeability with multiple non-continuous permeability measurement methods.
APA, Harvard, Vancouver, ISO, and other styles
2

Konno, T., L. Ren, G. Piao, García J. M. Juárez, F. M. Suárez, S. J. Jimenez-Sandoval, T. Wakahara, K. Miyazawa, and E. M. Ferreira. "Raman Spectroscopic Measurement of a Vacuum-Deposited C60 Thin Film." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/42804.

Full text
Abstract:
Measurement of Raman shifts of a C60 thin film and the evaluation of their uncertainties were conducted. A C60 thin film with a thickness of about 1.2 μm was fabricated on a SiO2 substrate by vacuum deposition. Raman spectra of the C60 thin film were obtained using the laser beam power density of 5.7 103 mW mm-2. The measured Raman shifts were corrected according to the calibration curve that was prepared using sulfur and naphthalene as the reference samples. Standard uncertainties were calculated and combined in order to determine the combined uncertainty and the expanded uncertainty. It was found that the increase of measurement time and measurement points for the calibration curve leads to the higher reliability.
APA, Harvard, Vancouver, ISO, and other styles
3

Al-Rawi, S. A. N. "Silicon sublimation at ultra high vacuum with microprocessor monitoring and measurements." Thesis, University of Kent, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.382189.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Taghvaei, Mohammad. "Interface circuitry design for a MEMS resonator-based vacuum measurement system." Thesis, McGill University, 2012. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=106505.

Full text
Abstract:
This work focuses on the interface circuitry design for MEMS resonator-based vacuum sensors. Two new measurement system topologies are proposed. The required specifications and the design of the comprising blocks for each topology are studied in detail. Next, the correct functionality and performance specifications of both architectures – designed in an IBM 0.13 μm CMOS technology – are presented through a combination of post-layout simulations and measurement results. Furthermore, the advantages and disadvantages of each design are examined in detail, followed by a comparison to similar commercial systems currently available on the market.Finally, setting the ultimate goal of building a low-power, monolithic, integrated MEMS-based temperature-compensated vacuum measurement system, areas with potential for future improvement, and expansion are discussed.
Ce travail présente la conception de circuits d'interface, pour la mesure de pression sous vide à l'aide de résonateurs MEMS. Deux nouvelles structures de systèmes de mesure sont proposées. Les spécifications requises, ainsi que la conception des blocs composants pour chaque structure, sont étudiées en détail. Par la suite, l'opération adéquate et les spécifications de performance pour les deux architectures - conçues par la technologie CMOS de IBM à 0.13 μm - sont présentées par une combinaison de simulations post-layout et de résultats mesurés. De plus, les avantages et inconvénients de chaque structure sont évalués en détail, suivis d'une comparaison avec des systèmes commerciaux similaires présentement disponibles sur le marché. Finalement, pour s'approcher du but ultime de construire le meilleur système intégré et monolithique de mesure de pression sous vide, à faible consommation de puissance et avec compensation pour les variations thermiques, les possibilités d'améliorations futures et d'extension sont discutées.
APA, Harvard, Vancouver, ISO, and other styles
5

Talib, Zeeshan. "Investigation of Fast High Voltage PDC Measurement based on a Vacuum Reed-switch." Thesis, KTH, Elektroteknisk teori och konstruktion, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-91924.

Full text
Abstract:
The diagnostic technique, polarization and depolarization current (PDC) is useful for insulation testing. It requires applying a DC step voltage to the test sample and measuring the current. To measure fast PDC phenomena a fast step is needed. One way of applying a fast high voltage step is to use power electronic switches. Series connection can be used to increase the voltage limit, but this result in unequal voltage sharing unless equipped with voltage balancing. In this work a high voltage vacuum reed switch is investigated as a simple and low-cost alternative to power electronic switches, handling up to 10 kV with a single device. The switch turn on and off behavior was studied. It was found that the initial turn-on is good, in the range of nanoseconds, but there is a problem with the vacuum recovering its insulating properties at low currents before the contacts fully close. The required output voltage level is therefore obtained only after a further settling time that increases with increased input voltage and is much longer than the initial breakdown, e.g. 20 µs for the case of 4.5 kV input voltage. Other limitations of the fast high voltage PDC were also studied. The output voltage was measured across the test sample without adding an intentional resistor in the circuit. There were large oscillations for 1 µs but these oscillations are damped due to inherent resistance of the connecting leads, series resistance of the capacitors and resistance of the reed switch. A comparison is made between the measured and the simulated results using MATLAB to see the effect of parasitic inductance. A damping resistor was added in the circuit and the output results were again compared. With the addition of the damping resistor, the number of oscillations were reduced and their time scale was limited to 0.1 µs . An analysis is made at the end which describes the limitation occurring in determining the high frequency component of PDC. The current during the step is many orders of magnitude higher than the polarization current even at 1 µs , so measurement of the current and protection of the apparatus is not trivial.
APA, Harvard, Vancouver, ISO, and other styles
6

Chew, Andrew David. "A rotating disc gauge for absolute total pressure measurement in a high vacuum." Thesis, University of York, 1993. http://etheses.whiterose.ac.uk/10874/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lun, Jonathan. "Development of a vacuum arc thruster for nanosatellite propulsion." Thesis, Stellenbosch : University of Stellenbosch, 2008. http://hdl.handle.net/10019.1/1527.

Full text
Abstract:
Thesis (MScEng (Mechanical and Mechatronic Engineering))--University of Stellenbosch, 2009.
This thesis describes the development of a vacuum arc thruster (VAT) to be used as a potential low mass (< 500 g), low power (< 5–10W) propulsion system for nanosatellites. The thruster uses a high voltage capacitive circuit to initiate and power the arc process with a 400 ns high current (150–800A) pulse. A one-dimensional steady state analyticalmodel describing the cathode region of the vacuum arc was developed. The model made use of mass and energy balances at the sheath region and cathode surface respectively to predict key quantities such as thrust, ion velocity, ion-to-arc current ratio and erosion rate. Predicted results were shown to be within the limits of reported literature (∼63 μN/A, 26.12 km/s, 0.077 and 110 μg/C respectively). A sensitivity analysis of the analytical model found that a high electric field in the cathode region impedes and decelerates ion flow, which is used for thrust. This was confirmed experimentally for thrust values at arc voltages greater than 2000 V. Both direct and indirect means of measuring thrust were achieved by using a deflecting cantilever beam and an ion collector system, respectively. The transient response of the cantilever beam to impulsive thrust was analytically modeled, whilst the ion current was found by measuring the current induced on a plate subject to ion bombardment. Knowledge of the ion current density distribution was successfully used to approximate the effective normal thrust vector. Direct and indirect thrust levels were roughly 140 and 82 μN/A of average arc current, respectively. Measured thrust was found to be higher than predicted thrust due to thrust contributions fromthe ablation of Teflon insulation. The discrepancy is also due to the uncertainty in quantifying free parameters in the analytical model such as the fraction of generated ions flowing away from the cathode region. The thrust-topower ratio, specific impulse and efficiency of the vacuum arc thruster at an average arc current of 200 A was measured to be 0.6 μN/W, 160 s and 0.05 %, respectively. A thruster performance analysis and specification showed that the VAT is capable of achieving specific orbital and slew manoeuvres within a constant 5–10 W average power. It was concluded that thruster performance could be improved by using a two-stage arc circuit consisting of a high voltage, low current, short pulse trigger and a low voltage, high current, long pulse driver.
APA, Harvard, Vancouver, ISO, and other styles
8

Nagai, Hisao, Mineo Hiramatsu, Masaru Hori, and Toshio Goto. "Measurement of oxygen atom density employing vacuum ultraviolet absorption spectroscopy with microdischarge hollow cathode lamp." American Institute of Physics, 2003. http://hdl.handle.net/2237/7098.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hannibal, Paul. "Compressibility Measurement and Modeling to Optimize Flow Simulation of Vacuum Infusion Processing for Composite Materials." BYU ScholarsArchive, 2015. https://scholarsarchive.byu.edu/etd/4433.

Full text
Abstract:
Out-of-autoclave manufacturing processes for composite materials are increasing in importance for aerospace and automotive industries. Vacuum Infusion processes are leading the push to move out of the autoclave. An understanding of the various process parameters associated with resin infusion is necessary to produce quality product. Variance in compaction, resin, and vacuum pressures are studied, concentrating on developing a compaction pressure profile as it relates to fiber volume fraction. The purpose of this research is twofold: (1) to show and quantify the existence of a resin pressure gradient in compression testing using rigid tooling, and (2) to use measured test data to validate and improve resin flow simulation models. One-dimensional compression tests revealed a pressure gradient across the diameter of the compression tool. The pressure gradient follows trends consistent with Darcy's Law. Compression tests revealed fabric hysteresis during compaction as shown in previous studies. Fiber compaction pressure was found to not be directly equal to compressive forces of the Instron when resin is present in the system. The relationship between Instron, resin and compaction pressures is defined. The compression study was used to validate previously developed flow simulation models. Resin pressures are critical to developing an accurate two-dimensional radial flow simulation for low permeability fabrics. It is feasible to determine final fiber volume fraction at a given compaction pressure.
APA, Harvard, Vancouver, ISO, and other styles
10

Chapanian, Rafi. "Study of accumulation of gases in vacuum systems: Measurement of gas transport properties of polymeric films." Thesis, University of Ottawa (Canada), 2004. http://hdl.handle.net/10393/26598.

Full text
Abstract:
In this thesis we have proven that the resistance to accumulation of gases in vacuum tubes is not always negligible. The process of accumulation was described using the Fick's second law of diffusion. The diffusion coefficient was assumed constant and evaluated, depending on pressure, considering Knudsen diffusion, molecular diffusion, or a combination of them. Experimental system with tubes of different lengths and diameters was built and equipped with two high sensitivity pressure transducers to measure the dynamic pressure difference along the system during gas flow experiments. Two cases were considered. First, the governing partial differential equation was solved analytically assuming a constant flow of gas into the system. Experimentally, a low-flow mass flow controller provided the constant flow of gas into the system. In the second case, the governing partial differential equation was solved numerically assuming a time-dependent flow of gas given by the Barrer equation. (Abstract shortened by UMI.)
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Vacuum Measurement"

1

Total pressure measurements in vacuum technology. Orlando: Academic Press, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Leck, J. H. Total and Partial Pressure Measurement in Vacuum Systems. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-0877-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

National Physical Laboratory (Great Britain) and Institute of Measurement and Control., eds. Guide to the measurement of pressure and vacuum. London: Institute of Measurement and Control, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Leck, J. H. Total and partial pressure measurement in vacuum systems. Glasgow: Blackie, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Klose, Jules Z. Radiometric standards in the vacuum ultraviolet. Gaithersburg, Md: U.S. Dept. of Commerce, National Bureau of Standards, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dittmann, Sharrill. NIST measurement services: high vacuum standard and its use. Washington, D.C: National Institute of Standards and Technology, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Canfield, L. Randall. NBS measurement services: Far ultraviolet detector standards. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Canfield, L. Randall. NBS measurement services: Far ultraviolet detector standards. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Canfield, L. Randall. NBS measurement services: Far ultraviolet detector standards. Washington, D.C: National Bureau of Standards, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Klose, Jules Z. Radiometric standards in the vacuum ultraviolet. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Vacuum Measurement"

1

Lowell, S., Joan E. Shields, Martin A. Thomas, and Matthias Thommes. "Vacuum Volumetric Measurement (Manometry)." In Characterization of Porous Solids and Powders: Surface Area, Pore Size and Density, 242–59. Dordrecht: Springer Netherlands, 2004. http://dx.doi.org/10.1007/978-1-4020-2303-3_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Große Bley, Werner. "Measurement Methods for Gross and Fine Vacuum." In Vacuum Technology in the Chemical Industry, 161–72. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2014. http://dx.doi.org/10.1002/9783527653898.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Shin, Yong Hyeon, Seung Soo Hong, In Tae Lim, J. H. Kim, Dae Jin Seong, Kwang Hwa Chung, G. W. Moon, and Sung Woo Choi. "Measurement of Outgassing in a Vacuum Environment." In Key Engineering Materials, 831–37. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-958-x.831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Leck, J. H. "Gas analysis in vacuum systems: quadrupole mass analysers." In Total and Partial Pressure Measurement in Vacuum Systems, 155–92. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0877-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Leck, J. H. "Mechanical manometers." In Total and Partial Pressure Measurement in Vacuum Systems, 1–38. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0877-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Leck, J. H. "Thermal conductivity gauges." In Total and Partial Pressure Measurement in Vacuum Systems, 39–67. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0877-5_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Leck, J. H. "Thermionic cathode ionization gauges." In Total and Partial Pressure Measurement in Vacuum Systems, 68–115. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0877-5_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Leck, J. H. "Cold-cathode ionization gauges." In Total and Partial Pressure Measurement in Vacuum Systems, 116–24. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0877-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Leck, J. H. "Gauge calibration." In Total and Partial Pressure Measurement in Vacuum Systems, 125–37. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0877-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Leck, J. H. "Gas analysis in vacuum systems: magnetic, crossed-field and time-of-flight analysers." In Total and Partial Pressure Measurement in Vacuum Systems, 138–54. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0877-5_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Vacuum Measurement"

1

Zhizhong Zhao, Xuesong Guo, Haiping Xin, Yaqiong Ren, and Lijun Wang. "Data fusion of vacuum measurement in vacuum switchgears." In 2010 IEEE International Conference on Intelligent Computing and Intelligent Systems (ICIS 2010). IEEE, 2010. http://dx.doi.org/10.1109/icicisys.2010.5658666.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Shi, Xiong, Guangxi Zhu, Zhiyin Gan, and Sheng Liu. "Vacuum Degree Measurement of MEMS Vacuum Package Based on DDS." In 2006 7th International Conference on Electronic Packaging Technology. IEEE, 2006. http://dx.doi.org/10.1109/icept.2006.359732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dufour, Adrien, Clément Jacquard, Young-Sik Ra, Claude Fabre, and Nicolas Treps. "Photon subtraction from a multimode squeezed vacuum state." In Quantum Information and Measurement. Washington, D.C.: OSA, 2017. http://dx.doi.org/10.1364/qim.2017.qt4b.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Maclay, Jordan, Jay Hammer, Rod Clark, Michael George, Lelon Sanderson, Rob Ilic, and Quinn Leonard. "Measurement of repulsive quantum vacuum forces." In 37th Joint Propulsion Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2001. http://dx.doi.org/10.2514/6.2001-3359.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hamanaka, Marcos Henrique Mamoru Otsuka, Vinicius do Lago Pimentel, Wellington Oliveira Avelino, Viviane Nogueira Hamanaka, Fernando Fuzinatto Dall'Agnol, and Gilberto Medeiros Ribeiro. "In-vacuum work function measurement system." In 2016 1st International Symposium on Instrumentation Systems, Circuits and Transducers (INSCIT). IEEE, 2016. http://dx.doi.org/10.1109/inscit.2016.7598204.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hennessy, R. G., M. M. Shulaker, R. Melamud, N. Klejwa, S. A. Chandorkar, B. S. Kim, J. Provine, T. W. Kenny, and R. T. Howe. "VACUUM ENCAPSULATED RESONATORS FOR HUMIDITY MEASUREMENT." In 2010 Solid-State, Actuators, and Microsystems Workshop. San Diego: Transducer Research Foundation, 2010. http://dx.doi.org/10.31438/trf.hh2010.132.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Duan, XiongYing, FuBiao Li, EnYuan Dong, MinFu Liao, Yan Guo, and JiYan Zou. "Study on inner vacuum pressure measurement system of vacuum circuit breakers." In 2017 4th International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2017. http://dx.doi.org/10.1109/icepe-st.2017.8188970.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

wang, Chengxiang, Yulie Wu, Zhanqiang Hou, Yunbin Kuang, Yongmeng Zhang, Xuezhong Wu, and Dingbang Xiao. "A MEMS Type Damping Viscous Vacuum Gauge For High Vacuum Measurement." In 2020 IEEE SENSORS. IEEE, 2020. http://dx.doi.org/10.1109/sensors47125.2020.9278897.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Huang, Tongyi, Huirong Xiao, Junqi Shi, Jianguang OuYang, and Sheng Wang. "A High Sensitive Online Diagnosis System of Vacuum Degree in Vacuum Interrupter." In 2013 Third International Conference on Instrumentation, Measurement, Computer, Communication and Control (IMCCC). IEEE, 2013. http://dx.doi.org/10.1109/imccc.2013.368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

KRAMER, S. D., M. G. PAYNE, and G. H. CHEN. "Vacuum ultraviolet refractive-index measurement in xenon." In Conference on Lasers and Electro-Optics. Washington, D.C.: OSA, 1985. http://dx.doi.org/10.1364/cleo.1985.tha5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Vacuum Measurement"

1

Eriksson, Leif S. Measurement of Ultra Low OutGassing Rates for NLC UHV Vacuum Chambers. Office of Scientific and Technical Information (OSTI), August 2002. http://dx.doi.org/10.2172/800019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cowan, R. G. Feasibility of direct reactivity measurement in multi-canister overpacks at the Cold Vacuum Drying Facility. Office of Scientific and Technical Information (OSTI), October 1997. http://dx.doi.org/10.2172/344977.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Schamiloglu, Edl, and Frank Hegeler. Refined Measurement and Signal Analysis Techniques in Vacuum and Plasma-Filled High Power Microwave Sources. Fort Belvoir, VA: Defense Technical Information Center, June 2000. http://dx.doi.org/10.21236/ada378843.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Liu, D. D. S., D. J. Patmore, T. S. Yuyitung, J. J. Lipsett, and K. Chapman. Measurement of density and expansion coefficient of light Arabian vacuum bottoms at high temperatures and pressures. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1986. http://dx.doi.org/10.4095/302670.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kasha, D., and J. Brennan. A MEASUREMENT OF THE LONGITUDINAL COUPLING IMPEDANCE OF THE RC NETWORKS USED AT THE INSULATED FLANGES OF THE AGS VACUUM CHAMBERS. Office of Scientific and Technical Information (OSTI), August 1987. http://dx.doi.org/10.2172/1151195.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Griem, Hans R. High Resolution Spectroscopy in the Divertor and Edge Regions of Alcator-C Mode and Measurement of Radiative Transfer in Vacuum-UV Line Emission from Magnetic Fusion Devices. Office of Scientific and Technical Information (OSTI), March 2005. http://dx.doi.org/10.2172/1046049.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Schall, Wolfgang O., Hans-Albert Eckel, and Sebastian Walther. Lightcraft Impulse Measurements under Vacuum. Fort Belvoir, VA: Defense Technical Information Center, August 2003. http://dx.doi.org/10.21236/ada417732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ahrens L., C. Gardner, and S. Y. Zhang. Booster Vacuum Measurements for Gold Beam Injection. Office of Scientific and Technical Information (OSTI), May 1998. http://dx.doi.org/10.2172/1132448.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lee, S. A., W. M. Jr Fairbank, W. H. Toki, J. L. Hall, P. F. Jr Kraushaar, and T. S. Jaffery. Measurement of the magnetically-induced QED birefringence of the vacuum and an improved search for laboratory axions: Technical report. Project definition study of the use of assets and facilities of the Superconducting Super Collider Laboratory. Office of Scientific and Technical Information (OSTI), October 1994. http://dx.doi.org/10.2172/10107194.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hseuh H. C. and M. Tanaka. Gas Load (Q) Measurements of the AGS Ring Vacuum Sectors. Office of Scientific and Technical Information (OSTI), November 1985. http://dx.doi.org/10.2172/1151141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Vacuum Measurement' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography