Relevant bibliographies by topics / Utahování

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Utahování'

Author: Grafiati
Published: 28 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Utahování.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Utahování"

1

Kafuněk, Jan. "Návrh robotizovaného pracoviště pro automatické utahování šroubů spoje opěradlo – sedák a spony pásu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231959.

Full text
Abstract:
This diploma thesis deals with the problem of designing an automatic robotic workstation for automatic tightening screws connections seatback – seat and belt buckle. The research part of this thesis deals with current trends in the automotive industry, especially with the problem of assembling seats part, with focus on screwing. The design part of this thesis maps the process of designing two variants of an automatic robotic workstation. Special attention was given to the process of choosing the right industrial robot for the task, as well as to the construction of the end-effector and of the resulting 3D data. The right version of the workstation for the consecutive implementation was then chosen based on multi-criteria evaluation. The finishing touch of this thesis is a risk analysis for the implemented workstation.
APA, Harvard, Vancouver, ISO, and other styles
2

Schmidtová, Markéta. "Optické měření deformací přírubových spojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444269.

Full text
Abstract:
The diploma thesis addresses the topic of optical measurements of flange joints during tightening and thermal loading. Commercially available optical systems with decreasing invasiveness were compared in opportunity which offer to an industrial environment. Various conditions are evaluated in 3D (scanning, DIC) as well as in 2D (DIC). The data for evaluation of sensitivity and system accuracy together with the evaluation of the data range were obtained by the measurement. Data evaluation showed the same accuracy for 2D and 3D system and the possibility of quality inspection of the joint by assessing the inspection dimensions in operation.
APA, Harvard, Vancouver, ISO, and other styles
3

Rygl, Filip. "Výroba utahováku matice oběžného kola čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417124.

Full text
Abstract:
This thesis solves the problem of design and production of a special mounting device for the impeller nut of the main circulation pump GCN-317. The proposed device is intended to solve the problems associated with the mounting and dismounting of this nut. The work provides basic information about the Dukovany Nuclear Power Plant and VVER-440 systems in general, including their brief history. It also introduces the operational and legislative environment of the primary circuit of the nuclear power plant. It deals with the task and technical description of the main circulation pump and its overhaul. The following sections present the basic principles of construction of the device and an overview of its components with a description of their purpose and method of production. The last part of the thesis describes the function of the device and its verification and reports on its deployment.
APA, Harvard, Vancouver, ISO, and other styles
4

Jelínek, Tomáš. "Oprava turbínové skříně." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-320107.

Full text
Abstract:
This diploma thesis deals with the repair of a steam backpressure single-stage turbine. This thesis is assigned to a specific Spilling turbine case. A revisional report of this turbine with repair or exchange suggestions of demaged turbine parts is processed. In addition, a simulation of the contact pressure is carried out on the split plane of the housing. Structural modifications are designed and simulated to increase the parting plane's tightness. Further, the calculation of the tightening torque of the split plane is performed and a control thermodynamic and strength calculation of the labyrinth seals is performed.
APA, Harvard, Vancouver, ISO, and other styles
5

Holečková, Michaela. "Rekonstrukce parní kondenzační turbíny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254346.

Full text
Abstract:
The aim of this master thesis is the retrofit of a condensing steam turbine. The thesis obtains a revision of the steam turbine, the reconstruction of steam turbine blades and the basic calculation of bolt torques of the turbine split plane. The master thesis is assigned to a specific retrofit of the steam turbine Lang. In the introductory part the thesis is focused on the turbine description and the basic functions of selected turbine components. The following part deals with the revision and the proposal of repairs for all components and the recommendation of additional modernizations of specific measuring equipments. The analysis of anchoring the stator and rotor blading and their reconstruction is discussed in the next part. In the last part the thesis focuses on the sealing of the turbine split plane and the calculation of the various bolt torques closely linked to the sealing.
APA, Harvard, Vancouver, ISO, and other styles
6

Jakeš, Libor. "Řídicí systém pro automatické montážní pracoviště." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220708.

Full text
Abstract:
This master’s thesis deals with programming of control system for an automatic assembly line rear seats of passenger cars. The theoretical part describes assembly line, PLC, robot, electric nutrunner and intelligent camera Sick. Practical part of the thesis characterizes created programs of assembly workplace control system. This part also explains creating a model of station and subsequent formal verification of basic safety and functional properties.
APA, Harvard, Vancouver, ISO, and other styles
7

Pálka, Marek. "Analýza spojů proudovodiče při měření proudu ve VN aplikacích." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242142.

Full text
Abstract:
The main focus of the dissertation thesis is determine the size of the fastening screw connection and fastening torque of the connection, which will be applied during assembly of the instrument current transformers and sensors. The large part of thesis is an experimental measurement of the proposed configurations of connections and modelling (simulating) certain model of connections in Ansys and SolidWorks analysis programs. The result of the dissertation will be design of tightening of the connection according to transient resistance and thermal losses.
APA, Harvard, Vancouver, ISO, and other styles
8

Žaba, Tomáš. "Realizace edukační úlohy na experimentální stanici pro modelování předepjatých šroubových spojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229389.

Full text
Abstract:
In the master’s thesis an educational task concerning an experimental apparatus for quantity measurement in preloaded bolted joint is realised. In terms of its preparation an innovation of the apparatus leading to an easier and faster pretension realisation was implemented. The educational task for students and also teaching material were produced. The educational task itself consists in experimental confirmation of the relation between the tightening torque and the caused pretension. An FEM model simulating an apparatus flange deformation by given pretension was designed to verify the experiment. The thesis also contains information about the preloaded bolts, pretension elicitation methods and pretension control methods.
APA, Harvard, Vancouver, ISO, and other styles
9

Hlavinka, Miloslav. "Rekonstrukce protitlakové parní turbiny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231818.

Full text
Abstract:
Tématem diplomové práce je revize parní turbíny Mitsubishi a výpočet utahovacích momentů šroubů dělící roviny. Tato práce je rozdělena do několika částí. Úvodní část práce obsahuje seznámení s rozsahem prováděných servisních prací na parních turbínách. Poté je zde samotná revize parní turbíny Mitsubishi. Tato revize je dělena podle jednotlivých komponent turbíny. Poté je zde stanoven seznam nutných oprav a také seznam doporučených oprav pro příští odstávku. V další části je zde shrnut výpočet utěsnění dělicích rovin a to s nebo bez odlehčení. Dále jsou rozebrány nejčastěji používané typy závitů spojovacího materiálu parních turbín. Hlavní částí práce je samotný výpočet utahovacího momentu. Výstupem této práce je poté program pro výpočet utahovacího momentu v programu Excel.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography