Books on the topic 'Ultrasonic testing'

American Society for Nondestructive Testing, ed. Ultrasonic testing. Columbus, OH: The American Society for Nondestructive Testing, Inc., 2013.

L, Workman Gary, and Kishoni Doron, eds. Ultrasonic testing. 3rd ed. Columbus, OH: American Society for Nondestructive Testing, 2007.

Krautkrämer, Josef. Ultrasonic testing of materials. 4th ed. Berlin: Springer-Verlag, 1990.

Krautkrämer, Josef, and Herbert Krautkrämer. Ultrasonic Testing of Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-662-10680-8.

Krautkramer, Josef. Ultrasonic testing of materials. 4th ed. Berlin: Springer-Verlag, 1989.

Krautkrämer, Josef. Ultrasonic Testing of Materials. 4th ed. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990.

United States. National Aeronautics and Space Administration., ed. The acousto-ultrasonic approach. [Washington, D.C.]: National Aeronautics and Space Administration, 1987.

United States. National Aeronautics and Space Administration., ed. The acousto-ultrasonic approach. [Washington, D.C.]: National Aeronautics and Space Administration, 1987.

Marks, Paul T. Ultrasonic testing classroom training book. Columbus, OH: American Society for Nondestructive Testing, 2005.

Bindal, V. N. Transducers for ultrasonic flaw detection. New Delhi: Narosa, 1999.

Blitz, Jack. Ultrasonic methods of non-destructive testing. London: Chapman & Hall, 1996.

Schramm, Raymond E. Ultrasonic railroad wheel inspection using EMATS. Washington, DC: National Institute of Standards and Technology, 1989.

Wright, William Matthew David. Air-coupled ultrasonic testing of materials. [s.l.]: typescript, 1996.

Kočiš, Štefan. Ultrasonic Measurements and Technologies. Boston, MA: Springer US, 1996.

Rene, Marklein, and Mayer Klaus 1954-, eds. Ultrasonic nondestructive testing of materials: Theoretical foundations. Boca Raton: Taylor & Francis, 2012.

Kleinert, Wolf. Defect Sizing Using Non-destructive Ultrasonic Testing. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-32836-2.

H, Williams James. Ultrasonic testing of plates containing edge cracks. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Sympsium, on Ultrasonic Electronics (6th 1985 Tokyo Japan). Proceedings of the 6th Symposium on Ultrasonic Electronics, Tokyo, December 10-12, 1985. Tokyo: Publication Office, Japanese Journal of Applied Physics, 1986.

Baldev, Raj. Non-destructive testing of welds. New Delhi, India: Narosa Pub. House, 2000.

R, Hoskins Brad, Karner Paul, Thiokol Corporation Space Operations, and George C. Marshall Space Flight Center., eds. Early focus development effect, ultrasonic inspection of fixed housing metal-to-adhesive bondline: Final report. Brigham City, UT: Thiokol Corporation, Space Operations, 1991.

Hartman, J. K. Early focus development effect, ultrasonic inspection of fixed housing metal-to-adhesive bondline: Final report. [Brigham City, UT]: Thiokol Corporation, Space Operations, 1991.

N, Ermolov I., ed. Ulʹtrazvukovye pʹezopreobrazovateli dli͡a︡ nerazrushai͡u︡shchego kontroli͡a︡. Moskva: "Mashinostroenie", 1986.

Welding, International Institute of. Automated ultrasonic weld inspection: Guidance on the merits, performance requirements, selection and applications of automated ultrasonic inspection for welds. Northampton: British Institute of Non-Destructive Testing, 1989.

Garbacz, Andrzej. Ultrasonic evaluation methods applicable to polymer concrete composites. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2003.

Kundu, T. Ultrasonic nondestructive evaluation: Engineering and biological material characterization. Boca Raton, FL: CRC Press, 2004.

Welding, International Institute of, and Welding Institute, eds. Evaluation of ultrasonic signals: Guidance and recommendations on evaluation of ultrasonic signals in manual weld examination, and on defeat acceptance. Cambridge: Published on behalf of the International Institute of Welding by the Welding Institute, 1987.

Charlesworth, J. P. Engineering applications of ultrasonic time-of-flight diffraction. 2nd ed. Baldock, Hertfordshire, England: Research Studies Press, 2001.

Charlesworth, J. P. Engineering applications of ultrasonic time-of-flight diffraction. Taunton, Somerset, England: Research Studies Press, 1989.

Schmerr, Lester W. Fundamentals of ultrasonic nondestructive evaluation: A modeling approach. New York: Plenum Press, 1998.

Chabanov, V. E. Lazernyĭ ulʹtrazvukovoĭ kontrolʹ materialov. Leningrad: Izd-vo Leningradskogo universiteta, 1986.

Krylovich, V. I. Ulʹtrazvukovye chastotno-fazovye metody issledovanii︠a︡ i nerazrushai︠u︡shchego kontroli︠a︡. Minsk: "Nauka i tekhnika", 1985.

Krylovich, V. I. Ulʹtrazvukovye chastotno-fazovye metody issledovanii͡a︡ i nerazrushai͡u︡shchego kontroli͡a︡. Minsk: "Nauka i tekhnika", 1985.

Vybornov, B. I. Ulʹtrazvukovai͡a︡ defektoskopii͡a︡. 2nd ed. Moskva: "Metallurgii͡a︡", 1985.

Babikov, O. I. Ulʹtrazvukovye pribory kontroli͡a︡. Leningrad: "Mashinostroenie," Leningradskoe otd-nie, 1985.

Domarkas, V. Ĭ. Ulʹtrazvukovai͡a︡ ėkhoskopii͡a︡. Leningrad: "Mashinostroenie," Leningradskoe otd-nie, 1988.

Wulf, Graham Leslie. Use of ultrasonics to determine the crack size in high strength steel gun. Ascot Vale, Vic: Dept. of Defence, Materials Research Laboratories, 1985.

1951-, Duke John C., ed. Acousto-ultrasonics: Theory and application. New York: Plenum Press, 1988.

International Institute of Welding. Commission V--Testing, Measurement, and Control of Welds. and American Welding Society, eds. Handbook on the ultrasonic examination of austenitic welds. Miami, FL: Published on behalf of the International Institute of Welding by the American Welding Society, 1986.

E, Schramm Raymond, United States. Federal Railroad Administration. Office of Research and Development, and National Institute of Standards and Technology (U.S.), eds. Residual stress detection in railroad wheels: An ultrasonic system using EMATS. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1991.

Hirao, Masahiko. EMATS for science and industry: Noncontacting ultrasonic measurements. Boston, MA: Kluwer Academic Publishers, 2002.

United States. National Aeronautics and Space Administration., ed. Ray propagation path analysis of acousto-ultrasonic signals in composites. [Washington, DC]: National Aeronautics and Space Administration, 1987.

Paolo, Delsanto Pier, ed. Universality of nonclassical nonlinearity: Applications to non-destructive evaluations and ultrasonics. New York: Springer, 2007.

Ultrasonic testing. Columbus, OH: American Society for Nondestructive Testing, 1991.

(Editor), Gary L. Workman, ed. Ultrasonic Testing. 3rd ed. Amer Society for Nondestructive, 2007.

Krautkrämer, Josef, Herbert Krautkrämer, and B. W. Zenzinger. Ultrasonic Testing of Materials. Springer, 2014.

Krautkraemer, Herbert, J. Krautkraemer, and H. Krautkraemer. Ultrasonic Testing of Materials. Springer, 1985.

Zenzinger, B. W., J. Krautkrämer, and Walter Grabendörfer. Ultrasonic Testing of Materials. Springer, 2014.

Zenzinger, B. W., Josef Krautkrämer, and Herbert Krautkrämer. Ultrasonic Testing of Materials. Springer London, Limited, 2013.

Fundamentals of Ultrasonic Testing. CRC Press LLC, 2024.

Nondestructive Testing Ultrasonic Volume III - Applications (Ultrasonic, III). PH Diversified, Inc., 1999.