Academic literature on the topic 'Uhlíkový nanomateriál'

Electrospininig se osvědčil jako jeden z nejpopulárnějších a nejrozšířenějších způsobů výroby vysoce kvalitních vláken s požadovanými parametry. Kvalita a morfologie vyráběných vláken závisí na mnoha parametrů, jako je vlhkost, dávka materiálu, aplikované napětí atd. Omezení keramických piezomateriálů (křehkost, toxicita vzorků obsahujících olovo, obtížnost přípravy složitých tvarů atd.) vynutila výzkum v oblasti piezoelektrických polymerů. Jedním z nich je polyvinylidenfluorid (PVDF). polyvinylidenfluorid může by být připraven v různých formách: tenké filmy, objemové vzorky, vlákna. PVDF vlákna přitahují největší pozornost díky vysoké flexibilitě, nízké hmotnosti, mechanické stabilitě a chemické inertnosti. Vlastnosti PVDF vláken lze zlepšit pomocí doplňujících materiálů: keramické částice, kovové nanočástice, Graphicitové materiály jako jsou oxid Graphicenu nebo uhlíkové nanotrubičky (CNT).

The goal of this thesis is to describe the possibility of using a microscope for documentation defects and innovation of electrical machines. I used an electron microscope to document carbon brushes and nanomaterials for possible upgrade of the sliding contact. Use microscopes gives us detailed information about the structure of materials, at the largest stress of the electrical machine. Based on the collected data can be further analyzed and innovation of the carbon brush.

The exact mechanism of the discharge in liquids ignition is not sufficiently known up to now. Although during the last years was achieved the great progress and overloading which some of them are written in this theoretical part of thesis. This thesis is divided into two experimental parts. When the first part deals with diagnostics of diaphragm discharge in electrolyte solutions and the second part is focused on its use for uncoiling (higher homogenization) of carbon nanotubes in solutions. In experiment 1, three different sized (4 l, 100 ml, 50 ml) diaphragm discharge configurations were used to diagnose diaphragm discharge in electrolyte solutions. Diagnostics is done through current and voltage waveforms with the addition of synchronized ICCD camera images that have been connected to a four-channel oscilloscope. The V-A characteristic can be described by three events occurring in the electrolyte solution with a gradual increase in voltage. Slowly increasing of the voltage in the solution leads first to electrolysis. The next phase is the formation of microbubbles or bubbles, which is characteristic of the curve by a slight decrease in the increase of the current passing between electrodes. The sudden increase in the current flow is characteristic of the last phase, namely the discharge phase. The distance of the electrodes from the diaphragm does not significantly affect the V-A characteristic. The higher diameter of the pin hole, therefore, has a higher voltage, but this does not affect the origin of bubble generation or breakdown. The higher thickness of diaphragm, the higher voltage is needed to the beginning of the bubbles generation, and consequently the discharge breakdown. Comparison of the voltage of the start generation of the bubbles and breakdown for PET diaphragms and diaphragms from the ceramic there was no mark able difference. One of the most important parameters is the conductivity of the electrolyte solution. The lower voltage is needed for the start generation of the bubbles at the higher solution conductivity, and also the discharge generation is observed at a lower breakdown voltage. The second experimental part is focused on the study of the diaphragm discharge effect on carbon nanotubes. A specially designed U-shaped reactor is used to modify carbon nanoparticles. Tap water and aqueous solutions of organic compounds are used as the electrolytic solutions. The discharge is generated by a non-pulsed DC high source with a voltage in the range of 0-2.8 kV supplied to platinum electrodes located in the electrolyte solution. The experimental results have shown that the diaphragm discharge has positive effects on the disintegration of clusters and agglomerates of carbon nanotubes. The primary effect on disintegration is probably the shock waves generated by the discharge. It turned out that it depends on the electrode configuration, where the treatment in anode space has far greater effects than the treatment in cathode half of the reactor. Effects of carbon nanotubes disintegration in solution are long-lasting and the treatment effect is not loosed after several months. There were detected no significant changes in the structure of plasma-treated nanotubes by Infra-red spectroscopy.

Nanotechnology in the intensive care: Intravascular biocompatibility of carbon nanomaterials - effect of carbon nanotubes on blood platelets. EFFECT OF CARBON NANOTUBES ON BLOOD PLATELETS Carbon nanotubes (CNTs) are among the principal materials currently used in biomedical nanotechnologies. CNTs possess superior mechanical and chemical characteristics including enormous tensile strength, elasticity and conductivity. As a result they are very popular and attractive for use in various biomedical applications. Many of these applications may lead ultimately to contact of carbon nanomaterials and blood. Furthermore, CNTs may also be present intravascularly as a result of environmental or occupational exposure. Therefore, the investigation of the intravascular biocompatibility of CNTs is a critical safety issue. We studied the effects of structurally different purified CNT materials from different manufacturers on human platelets and compared their effects to amorphous carbon black nanoparticles (ACB), fullerene C60, fullerenol C60(OH)24 and NIST standard polystyrene nanobeads (PNBs). Using light transmission aggregometry of human platelet rich plasma, we found that various CNTs induce PLT aggregation and this occurs in a concentration dependent manner. In contrast to CNTs, ball-like shaped fullerene...

Increasing interest in industrial and medical applications of carbon nanomaterial leads to the need to examine its interactions with living systems. Nanocrystalline diamond (NCD) films possess high mechanical and chemical stability which, together with its biocompatibility with human cells, enables applications in human body. Some of carbon nanoparticles possess strong antibacterial activity. In this work the effects of NCD with hydrogen, oxygen and fluorine termination deposited on glass and silicone on adhesion of gram-negative bacteria Escherichia coli K-12 in mineral medium is described and the impact of cultivation medium on effects of NCD films is compared. Prior the growth of the E. coli biofilm on NCD films, the method for quantification of biofilm using crystal violet staining and the method for biofilm cultivation in mineral medium were optimised. The properties of NCD film are independent on the base substrate. Hydrogen and fluorine terminated NCD films show antiadhesive properties only in mineral medium but not in complex medium. This is explained by formation of a conditioning film on the surface of the NCD film during cultivation in complex medium. On the other hand, O-NCD film supports bacterial adhesion in both cultivation media. Second part of this thesis is dedicated to carbon...

The thesis is based on articles describing the fundamental research of carbon based nanomaterials for their possible utilization in biomedicine. The aim of this thesis was to describe the way how human osteoblasts (SAOS-2 cell line) and primary human mesenchymal stem cells (hMSC) adhere, grow and behave on surfaces made of several carbon allotropes - nanocrystalline diamond (NCD), single walled carbon nanotubes (SWCNTs) films and graphene. The utilization of carbon as the basic material promised good biocompatibility and possibility of useful surface modifications. The NCD had modified surface nanotopography (nanoroughness and nanostructuring prepared by dry ion etching). All the materials had modified surface atomic termination with oxygen and hydrogen which changes the surface electrical conductivity, surface charge and wettability. It was hypothesized that the surface termination can also influence the cell adhesion and growth. It turned out that all the studied materials were suitable as substrates for cultivation of mentioned cell types. Various nanoroughnesses of NCD surface had different effect on the cell adhesion and cell metabolic activity. Nanostructuring of the NCD influenced the formation of focal adhesions. The surface terminations of NCD and the other studied nanomaterials in...