Relevant bibliographies by topics / TVT and SPARC

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'TVT and SPARC'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'TVT and SPARC.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "TVT and SPARC"

1

Wein, Alan J. "TVT and Sparc Suburethral Slings: A Case-Control Series." Journal of Urology 173, no. 4 (April 2005): 1265–66. http://dx.doi.org/10.1016/s0022-5347(05)61070-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dietz, H. P., A. J. Foote, H. L. J. Mak, and P. D. Wilson. "TVT and Sparc suburethral slings: a case?control series." International Urogynecology Journal and Pelvic Floor Dysfunction 15, no. 2 (April 1, 2004): 129–31. http://dx.doi.org/10.1007/s00192-003-1118-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Xijun, Wei Chen, and Zhigang Cao. "SPARC: Superposition-Aided Rateless Coding in Wireless Relay Systems." IEEE Transactions on Vehicular Technology 60, no. 9 (November 2011): 4427–38. http://dx.doi.org/10.1109/tvt.2011.2171773.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gandhi, Sanjay, Yoram Abramov, Christina Kwon, Jennifer L. Beaumont, Sylvia Botros, Peter K. Sand, and Roger P. Goldberg. "TVT versus SPARC: comparison of outcomes for two midurethral tape procedures." International Urogynecology Journal 17, no. 2 (August 4, 2005): 125–30. http://dx.doi.org/10.1007/s00192-005-1369-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kim, J. Y., H. C. Jung, K. H. Moon, T. C. Park, D. Y. Kim, and C. H. Park. "312 Comparisons of iris, TVT and SPARC procedure for stress urinary incontinence." European Urology Supplements 3, no. 2 (February 2004): 80. http://dx.doi.org/10.1016/s1569-9056(04)90311-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, Ji Yoon, and Hee Chang Jung. "The Efficacy of IRIS Procedure in Stress Urinary Incontinence: Comparison with TVT and SPARC." Journal of the Korean Continence Society 10, no. 2 (2006): 126. http://dx.doi.org/10.5213/jkcs.2006.10.2.126.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

&NA;. "Randomized Clinical Trial Comparing Suprapubic Arch Sling (SPARC) and Tension-Free Vaginal Tape (TVT)." Journal of Urology 175, no. 1 (January 2006): 224. http://dx.doi.org/10.1097/00005392-200601000-00063.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Botros, S. M., J. R. Miller, M. Akl, R. P. Goldberg, and P. K. Sand. "NON-ORAL POSTER 28: Detrusor Overactivity and Urge Incontinence in Monarc Versus TVT And SPARC." Journal of Pelvic Medicine and Surgery 12, no. 2 (March 2006): 89–90. http://dx.doi.org/10.1097/00146866-200603000-00056.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Andonian, Sero, Tony Chen, Benoit St-Denis, and Jacques Corcos. "Randomized Clinical Trial Comparing Suprapubic Arch Sling (SPARC) and Tension-Free Vaginal Tape (TVT): One-Year Results." European Urology 47, no. 4 (April 2005): 537–41. http://dx.doi.org/10.1016/j.eururo.2004.12.023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Andonian, S., T. Chen, B. St-Denis, and J. Corcos. "Randomized Clinical Trial Comparing Suprapubic Arch Sling (SPARC) and Tension-Free Vaginal Tape (TVT): One-Year Results." Journal of Urology 175, no. 1 (January 2006): 224. http://dx.doi.org/10.1016/s0022-5347(05)00132-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "TVT and SPARC"

1

Lord, Helen Elizabeth. "A randomised controlled equivalence trial comparing tension-free vaginal tape (TVT) with suprapubic urethral support sling (SPARC)." University of Western Australia. Faculty of Medicine and Dentistry and Health Sciences, 2008. http://theses.library.uwa.edu.au/adt-WU2008.0086.

Full text
Abstract:
[Truncated abstract] Approximately 35% of women worldwide have stress incontinence, which is defined as involuntary leakage of urine on effort, exertion, or on sneezing and coughing. There are various surgical techniques for stress incontinence; however, minimally invasive operations are increasingly being chosen by surgeons and their patients. Of these procedures, tension-free vaginal tape (TVT) has a cure rate of approximately 90% and is now perceived as the standard technique for stress incontinence. Reported complications of TVT include arterial laceration, bladder perforation, bowel perforation, de novo urgency, dyspareunia, excessive blood loss, haematoma, nerve injuries, urethral erosion, urge incontinence, urinary tract infection, vascular injury, vaginal mesh erosion, voiding dysfunction and death. Suprapubic urethral support sling (SPARC) is a very similar minimally invasive operation and early indications suggested that the success rate for treating stress incontinence was expected to be identical or better than those obtained with the earlier TVT approach, with possibly fewer adverse perioperative events. Our trial sought to establish equivalence between TVT and SPARC in relation to short-term complications and efficacy. OBJECTIVES The primary outcome was bladder perforation. Secondary outcomes were blood loss, voiding difficulty, urgency, and cure of stress incontinence symptoms. METHOD A randomised controlled one-sided equivalence trial (RCT) was conducted in Perth, Western Australia during 2003 and 2004 by researchers in the School of Population Health, University of Western Australia (UWA) and King Edward Memorial Hospital (KEMH). Patients were recruited from the public Urology/Urogynaecology Clinic at the primary women's hospital and the consultant surgeons' private practices. ... However, acute urinary retention requiring a return to theatre to loosen the tape (TVT 0%, SPARC 6.5%; OR: [infinity], 95% CL: 2.2, [infinity]; p=0.002) and subjective short-term cure (TVT 87.1%, SPARC 76.5%; OR: 2.07, 95% CL: 1.13, 3.81; p=0.03) were statistically significantly different. CONCLUSIONS The results are consistent with clinical equivalence between TVT and SPARC in relation to the incidence of bladder perforation. No statistically significant difference was found between TVT and SPARC in blood loss, urgency or short-term objective cure of stress incontinence at the six week post-discharge visit to the surgeon. However, the tapes were more difficult to adjust correctly in SPARC procedures and a statistically significant number of patients required a return to theatre for loosening of the tape (TVT 0/147, 0% and SPARC 10/154, 6.5%, p=0.002). Compared with SPARC, TVT was statistically significantly higher for subjective short-term cure. In ii relation to vaginal mesh erosion, TVT was lower than SPARC, though not statistically significantly. Overall, voiding difficulty (loosening of the tape), urgency and vaginal mesh erosion were the most important clinical problems. This randomised controlled trial demonstrates the importance of testing new devices which appear to be similar, but which may have clinically relevant differences. A follow up study to assess the long-term efficacy of tension-free vaginal tape and suprapubic urethral support sling and associated complications is planned.
APA, Harvard, Vancouver, ISO, and other styles
2

Molsner, Jochen. "Effektivitäts- und Kostenanalyse verschiedener Harninkontinenzoperationsverfahren in einem Krankenhaus mittlerer Grösse im Zeitraum von 1996 bis 2004 Vergleich von Kolposuspension tension free vaginal tape (TVT), suprapubic arc sling (Sparc), transobturator subfacial hammock (Monarc) /." [S.l.] : [s.n.], 2005. http://deposit.ddb.de/cgi-bin/dokserv?idn=975038486.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Molsner, Jochen. "Effektivitäts- und Kostenanalyse verschiedener Harninkontinenzoperationsverfahren in einem Krankenhaus mittlerer Größe im Zeitraum von 1996 bis 2004 Vergleich von Kolposuspension, Tension Free Vaginal Tape (TVT TM), Suprapubic Arc Sling (Sparc TM), Transobturator Subfascial Hammock (Monarc TM) /." [S.l. : s.n.], 2005. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB11811179.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Stöß, Vera [Verfasser]. "Vergleich von zwei Operationsmethoden zur Behandlung der weiblichen Belastungsharninkontinenz : transobturatorisch (Monarc) versus retropubisch implantierte spannungsfreie Vaginalschlinge (TVT/Sparc) / von Vera Stöß." 2011. http://d-nb.info/101305167X/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Molsner, Jochen [Verfasser]. "Effektivitäts- und Kostenanalyse verschiedener Harninkontinenzoperationsverfahren in einem Krankenhaus mittlerer Größe im Zeitraum von 1996 bis 2004 : Vergleich von Kolposuspension tension free vaginal tape (TVT), suprapubic arc sling (Sparc), transobturator subfacial hammock (Monarc) / vorgelegt von Jochen Molsner." 2005. http://d-nb.info/975038486/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hsu, Zong-Kai, and 許宗凱. "An Inventory Model of Equipment Spare Parts – A Case Study of Company A in TFT-LCD Industry." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/37486861813643781195.

Full text
Abstract:
碩士
元智大學
工業工程與管理學系
99
Inventory management is one of critical aspects of successful management. Inventory was typically classified into raw materials, component parts, spare parts, work-in-process, sub-assemblies, and finished goods. Among these inventory types, characteristics as well as demand patterns of spare part items are absolutely the most variant and complicated of all. In equipment spare parts, the most important characteristic was the “high difference in variations of demand intervals”, which leading to complicated inventory management. This study focused on the spare parts inventory management of large equipments. In addition to the original characteristics of spare parts, the most important characteristic was the variety of items. Thus, In recent years, many scholars invested a lot of time and effort in spare parts inventory management and developed many strategies of spare parts’ inventory management. However, most of the methods were complex, and couldn’t be successfully implemented in the industry and still remained on the theoretical stage. In this study, we established an inventory classification model based on the characteristic of spare parts. Four classification schemes were applied and spare parts were classified into eight categories. An inventory management policy for each item category is also suggested. The proposed model does not require complex for obtaining policy parameter values. Finally, using the spare parts of TFT-LCD industrial process equipments as an example, the performance of the proposed model is evaluated. The result showed that it not only reduced inventory levels but also labor cost.
APA, Harvard, Vancouver, ISO, and other styles
7

宋炫慶. "An Inventory Model of TFT-LCD Equipments' Spare Parts with Reorder Point and Reorder Quantity as Decision Variable." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/56482794829966775609.

Full text
Abstract:
碩士
國立交通大學
管理學院碩士在職專班管理科學組
97
Spare parts inventories are not the final products to be sold customers and the policy which govern spare parts inventories are different from WIP and some other inventories. Spare parts of TFT-LCD equipment have characteristics of multi-items, high difference of usage and high difference of prices; hence managers usually use different inventory policy according to the usage and price of spare parts to govern spare parts inventories in practice. For those fast-moving items, most literatures assume that the demand is Normal distribution. It will overlook the relation between the demand of spare parts and malfunction of equipment. In this study, we develop a simple inventory model for the fast-moving spare parts under the continuous (s,Q) inventory policy, lead-time constant and demand follows compound Poisson distribution . Then, we find the optimal reorder point and the reorder quantities that make total cost minimal. The study result shows: (1). Average demand quantities affect reorder point, reorder quantity and total cost directly. (2). Lead time reduction does not mean the total cost reduction, but can help to reduce inventory level and reorder quantities. (3). The shortage cost increasing will lead the reorder point up and reorder quantities down respectively. Therefore, when the ordering cost is low and the shortage cost is high, the optimal purchasing decision will close to (S-1,S), that means lot-for-lot policy.
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Chih-Ping, and 陳致平. "Control and risk analysis of the statically electric spark in a organic solvent operation area -TFT-LCD gel preparation room as an example." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/14484835653800850071.

Full text
Abstract:
碩士
國立交通大學
工學院碩士在職專班產業安全與防災學程
95
Static electricity is a natural phenomenon. Nearly all materials produce the static electricity; hence it could exist in household, factory and environment. For example, people combing the hair and mechanical operations create the statically electric spark. Therefore, almost everyone has been experienced the static electricity. Generally, the locations of the organic solvent operation and product/storage of the flammable materials in the factory easily caused the fire and exploration amongst the static electricity-caused hazardous places. Thus, the control of the statically electric spark is a principal topic among others. This thesis adopted the gel preparation room of a TFT-LCD-produced factory as a research example to investigate the possible controls in the area of organic solvent operation of this room. This research also used a novel risk assay, Hazard and Operability Analysis, to dissect the procedures during the gel preparation. Accompany with a higher risk assay to improve the drawbacks and to decrease its risk level and the incidence of the hazard.
APA, Harvard, Vancouver, ISO, and other styles
9

Weng, Chia-Hung, and 翁嘉鴻. "Study on the Maintaining of Equipment Operation Efficiency by Optimizing the Inventory Level of Spare Parts - A Case Study of Material Handling Facilities in a TFT-LCD Manufacturing Company." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/vj4xnp.

Full text
Abstract:
碩士
國立交通大學
管理學院運輸物流學程
105
This study employed the material handling facilities in a TFT-LCD factory as a case study. We screened the set of critical parts for the material handling system from the historical data from the procurement and maintenance logs. Then, we conduct fitting analysis on the number of parts used for maintenance, the time between failures of the part to get the probability distribution of failure events for the critical parts. We formulated the corresponding simulation model for the material handling system based on the results of fitting analysis on the part consumption, the time between failures. Then, we used an enumeration approach to test different combinations of inventory levels of spare parts using the simulations, recorded the number of events in which the breakdown of the system lasts more than 8 hours (in short, BMT8). We pick the best combination of inventory levels of spare parts that meets the required conditions BMT8 is no more than 5 times with the minimum inventory holding cost. The framework and results of the proposed system simulation could serve an important support and reference on the decision of inventory levels of spare parts for the case company.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "TVT and SPARC"

1

Moore, Robert, John Miklos, and Neeraj Kohli. "Management of Stress Urinary Incontinence by TVT, PVT, SPARC SLING." In State of the Art Atlas of Endoscopic Surgery in Infertility and Gynecology, 352. Jaypee Brothers Medical Publishers (P) Ltd., 2004. http://dx.doi.org/10.5005/jp/books/10781_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cil, Ibrahim, Halil Ibrahim Demir, and Berfin Yaman. "Lean Logistics in the 2020s and a Cast Study About Logistics and Supply Chain Management in Toyota Boshoku Turkey." In Global Perspectives on Green Business Administration and Sustainable Supply Chain Management, 276–315. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-2173-1.ch017.

Full text
Abstract:
Logistics, getting the right product in the right place at the right time to the right customer, is one of the most important functions in large companies. Toyota is one of the world's leading companies in many aspects of successful business practice, particularly in logistics. The techniques developed in the company since the 1950s provide a competitive advantage to Toyota and provide efficiency in many business functions with supply chain management. For that reason, it is imperative to understand how lean logistics practices are applied in the Toyota Boshoku Turkey(TBT). This chapter examines practical logistics applications in TBT, one of the suppliers of Toyota located outside of Japan. In addition to theoretical research, it is also important that practical applications in enterprises such as a Toyota plant contribute to the literature. Consequently, as a case study, discussion and explanation of logistics and supply chains of TBT will spark reader interest.
APA, Harvard, Vancouver, ISO, and other styles
3

Keats, Jonathon. "Crowdsourcing." In Virtual Words. Oxford University Press, 2010. http://dx.doi.org/10.1093/oso/9780195398540.003.0020.

Full text
Abstract:
On the day that the June 2006 issue of Wired magazine was released, the publication’s technology director searched the web for the word crowdsourcing, the subject of an article by contributing writer Jeff Howe. He took a screenshot of what he found, a total of three brief mentions, and forwarded it to the author, advising that Howe save it as a “historical document.” Howe didn’t have to wait long to see history in action. Within nine days Google was returning 182,000 hits. Nor was it a fleeting fad. Three years later the number had multiplied to 1,620,000, with regular appearances in the mainstream media, from the Washington Post to Fox News, where crowdsourcing was averaging two hundred new mentions each month. There’s a simple explanation for the neologism’s success. Howe had detected a trend and given it a word. The backstory, which Howe posted on his personal blog, crowdsourcing.com, supports this notion: In January Wired asked me to give a sort of “reporter’s notebook” style presentation to some executives. I had recently been looking into common threads behind the ways advertising agencies, TV networks and newspapers were leveraging user-generated content, and picked that for my topic. Later that day I called my editor at Wired, Mark Robinson, and told him I thought there was a broader story that other journalists were missing, ie, that users weren’t just making dumbpet-trick movies, but were poised to contribute in significant and measurable ways in a disparate array of industries. In what Howe characterizes as “a fit of back-and-forth wordplay,” he and Robinson came up with a term that riffed off the title of a business book popular at the time, James Surowiecki’s The Wisdom of Crowds, while also suggesting opensource software and corporate outsourcing. When “The Rise of Crowdsourcing” was finally published six months later, the last of these three roots was explicitly evoked in the teaser: “Remember outsourcing? Sending jobs to India and China is so 2003. The new pool of cheap labor: everyday people using their spare cycles to create content, solve problems, even do corporate R & D.”
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "TVT and SPARC"

1

Ilgin, Mehmet A., and Surendra M. Gupta. "Joint Optimization of Transportation and Spare Parts Inventory Policies in a Reverse Logistics Network Using OptQuest." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-66682.

Full text
Abstract:
The aim of this study is the joint optimization of the transportation and spare parts inventory policies in a reverse logistics (RL) network designed for End of Life (EOL) television (TV) recyling. Besides recycling, Printed Circuit Boards (PCBs) recovered from EOL TVs are used to meet the spare PCB demand. In order to model this RL network with its disassembly, transportation and spare parts inventory related aspects, a discrete event simulation (DES) model has been developed in detail using Arena simulation software. Next, Arena OptQuest has been used to propose optimum number and size of trucks together with the optimum reorder (s) and order quantity (Q) levels for the spare PCBs based on the minimization of total cost which includes inventory holding, PCB recovery, new PCB acquisition, truck amortization and operating costs.
APA, Harvard, Vancouver, ISO, and other styles
2

Du, Haizhou, Keke Zhang, and Sheng Huang. "OctopusKing: A TCT-Aware Task Scheduling on Spark Platform." In 2019 IEEE 25th International Conference on Parallel and Distributed Systems (ICPADS). IEEE, 2019. http://dx.doi.org/10.1109/icpads47876.2019.00031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Guo, Tengfei, Min Huang, Qibing Zhu, and Ya Guo. "Hyperspectral image-based spare autoencoder network for TVB-N measurement in pork." In 2017 Spokane, Washington July 16 - July 19, 2017. St. Joseph, MI: American Society of Agricultural and Biological Engineers, 2017. http://dx.doi.org/10.13031/aim.201700450.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nazari, Shima, Anna Stefanopoulou, Rani Kiwan, and Vasilios Tsourapas. "A Coordinated Boost Control in a Twincharged Spark Ignition Engine With High External Dilution." In ASME 2016 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/dscc2016-9691.

Full text
Abstract:
This paper proposes a novel master-slave control strategy for coordination of throttle, wastegate and supercharger actuators in an electrically twincharged engine in order to guarantee efficient boost control during transients, while at steady state a throttle-wastegate coordination provides minimum engine backpressure hence engine efficiency elevation. The benefits and challenges associated with Low Pressure Exhaust Gas Recirculation (LP-EGR) in a baseline turbocharged engine, including improved engine efficiency, mainly due to better combustion phasing, and sluggish engine response to a torque demand due to slowed down air path dynamics were studied and quantified in [1]. Hence in this paper an electrical Eaton TVS roots type supercharger at high pressure side of the turbocharger compressor (TC compressor) is added to the baseline turbocharged engine and the performance of the proposed controller in the presence of LP-EGR, which is a more demanding condition, is evaluated and compared to the turbocharged engine. One dimensional (1D) crankangle resolved engine simulations show that the proposed master-slave control strategy can effectively improve the transient response of the twincharged engine, making it comparable to naturally aspirated engines, while the consumed electrical energy during transients can be recovered from the decreased fuel consumption due to LP-EGR conditions at steady state in approximately 1 second. Finally, a simple controller is developed to bypass the TC compressor and maximize the engine feeding charge during the transients in order to avoid TC compressor choking and achieve faster response.
APA, Harvard, Vancouver, ISO, and other styles
5

Makino, Keisuke, Ken-Ichi Mizuno, and Toru Shimamori. "Development and Fabrication of Silicon Nitride Components for Ceramic Gas Turbine." In ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/97-gt-067.

Full text
Abstract:
NGK Spark Plug Co., Ltd. has been developing various silicon nitride materials, and the technology for fabricating components for ceramic gas turbines (CGT) using theses materials. We are supplying silicon nitride material components for the project to develop 300 kW class CGT for co-generation in Japan. EC-152 was developed for components that require high strength at high temperature, such as turbine blades and turbine nozzles. In order to adapt the increasing of the turbine inlet temperature (TIT) up to 1,350 °C in accordance with the project goals, we developed two silicon nitride materials with further unproved properties: ST-1 and ST-2. ST-1 has a higher strength than EC-152 and is suitable for first stage turbine blades and power turbine blades. ST-2 has higher oxidation resistance than EC-152 and is suitable for power turbine nozzles. In this paper, we report on the properties of these materials, and present the results of evaluations of these materials when they are actually used for CGT components such as first stage turbine blades and power turbine nozzles.
APA, Harvard, Vancouver, ISO, and other styles
6

Camargo, Bruno G., Marcelo A. Vitola, Juan B. V. Wanderley, Sergio H. Sphaier, and Carlos A. Levi. "Forced Oscillation of a Circular Cylinder." In ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2010. http://dx.doi.org/10.1115/omae2010-20092.

Full text
Abstract:
Circular structures are frequently found in offshore industrial application, such as risers, umbilicals, spars, and TLP platforms. Theses structures are frequently subjected to vortex induced vibration. Sometimes, they are also subjected to forced vibration. In the present paper, the forced vibration of a circular cylinder is investigated by the numerical solution of the Reynolds Average Navier-Stokes (RANS) equations. An upwind and Total Variation Diminishing (TVD) conservative scheme is used to solve the governing equations written in curvilinear coordinates. The k–ε turbulence model is used to simulate the turbulent flow in the wake of the body, when necessary. The cylinder is forced to oscillate only in the transverse direction of the mean flow with low Reynolds number and low amplitude ratio. The numerical results of the lift and drag coefficients were compared with numerical data obtained from Benevenutti and Silvestrini [1] and Meneghini and Bearman [2] to validate the code for forced vibration. The numerical results indicate that the implemented code is able to reproduce the experimental data capturing quite well the lock-in boundary, and results of practical interest are obtained, such as mean drag, RMS lift and lock-in range and.
APA, Harvard, Vancouver, ISO, and other styles
7

Hara, Yasushi, Katsura Matsubara, Ken-ichi Mizuno, Toru Shimamori, and Hiro Yoshida. "Development and Evaluation of Silicon Nitride Components for Ceramic Gas Turbine." In ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/98-gt-498.

Full text
Abstract:
NGK Spark Plug Co., Ltd. has been developing various silicon nitride materials, and the technology for fabricating components for ceramic gas turbines (CGT) using theses materials. We are supplying silicon nitride material components for the project to develop 300 kW class CGT for co-generation in Japan. EC-152 was developed for components that require high strength at high temperature, such as turbine blades and turbine nozzles. In order to adapt the increasing of the turbine inlet temperature (TIT) up to 1350 °C in accordance with the project goals, we developed two silicon nitride materials with further improved properties: ST-1 and ST-2. ST-1 has a higher strength than EC-152 and is suitable for first stage turbine blades and power turbine blades. ST-2 has higher oxidation resistance than EC-152 and is suitable for power turbine nozzles. On applying these silicon nitride ceramics to CGT engine, we evaluated various properties of silicon nitride materials considering the environment in CGT engine. Particle impact testing is one of those evaluations. Materials used in CGT engine are exposed in high speed gas flow, and impact damage of these materials is considered to be a concern. We tested ST-1 in the particle impact test. In this test, we observed fracture modes, and estimated the critical impact velocity. This paper summarizes the development of silicon nitride components, and the result of evaluations of these silicon nitride materials.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'TVT and SPARC' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography