Relevant bibliographies by topics / Transformers Reference

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Transformers Reference'

Author: Grafiati
Published: 28 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Transformers Reference.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Transformers Reference"

1

Quan, Yu Sheng, Lin Jie Fang, Zi Jian Wang, and Pu Xin Shi. "Study of the Winding Temperature Distribution for Distribution Transformers." Applied Mechanics and Materials 672-674 (October 2014): 1380–83. http://dx.doi.org/10.4028/www.scientific.net/amm.672-674.1380.

Full text
Abstract:
In this article, in order to provide a reference for determining the location of fiber optic temperature probe in saving distribution transformers,we analyze the internal transformer by the basic heat transfer theory and simulate via ANSYS simulation software, determining the location of the highest temperature separately of the high and low voltage winding and iron core. The simulation results will be as a reference value for the experimental results. Therefore, it is very significant for analyzing the hottest point distribution of distribution transformers and improving thermal design of dry type transformers and temperature monitoring that the numerical simulation of dry-type distribution transformers of temperature field.
APA, Harvard, Vancouver, ISO, and other styles
2

Yang, Cheng Feng. "Research of Ageing and Life Assessment Methods of Power Transformers in Nuclear Power Plants." Advanced Materials Research 614-615 (December 2012): 1109–15. http://dx.doi.org/10.4028/www.scientific.net/amr.614-615.1109.

Full text
Abstract:
The effective methods of the ageing and life assessment for large and medium-sized power transformers used in nuclear power plants are analyzed and described, including the thermal ageing life assessment method for transformer solid insulation, the gas analysis method of CO and CO2 in the transformer oil, the average degree of polymerization method, furfural content analysis method, and the analysis method based on the insulation ageing-related electrical parameters. The analysis results show that the methods used can reasonably assess the remaining life of the transformers. These methods have important reference value to the ageing and life management for the large and medium-sized power transformers in nuclear power plants.
APA, Harvard, Vancouver, ISO, and other styles
3

Poonnoy, Nitchamon, Cattareeya Suwanasri, and Thanapong Suwanasri. "Fuzzy Logic Approach to Dissolved Gas Analysis for Power Transformer Failure Index and Fault Identification." Energies 14, no. 1 (December 23, 2020): 36. http://dx.doi.org/10.3390/en14010036.

Full text
Abstract:
This research focuses on problem identification due to faults in power transformers during operation by using dissolved gas analysis such as key gas, IEC ratio, Duval triangle techniques, and fuzzy logic approaches. Then, the condition of the power transformer is evaluated in terms of the percentage of failure index and internal fault determination. Fuzzy logic with the key gas approach was used to calculate the failure index and identify problems inside the power transformer. At the same time, the IEC three-gas ratio and Duval triangle are subsequently applied to confirm the problems in different failure types covering all possibilities inside the power transformer. After that, the fuzzy logic system was applied and validated with DGA results of 244 transformers as reference cases with satisfactory accuracy. Two transformers were evaluated and practically confirmed by the investigation results of an un-tanked power transformer. Finally, the DGA results of a total of 224 transformers were further evaluated by the fuzzy logic system. This fuzzy logic is a smart, accurate tool for automatically identifying faults occurring within transformers. Finally, the recommendation of maintenance strategy and time interval is proposed for effective planning to minimize the catastrophic damage, which could occur with the power transformer and its network.
APA, Harvard, Vancouver, ISO, and other styles
4

Ku, Te-Tien, Chia-Hung Lin, Chung-Sheng Li, Yung-Ruei Chang, and Yih-Der Lee. "Design of Micro-Phasor Measurement System to Identify Phasor of Distribution Transformers." Applied Sciences 9, no. 18 (September 12, 2019): 3831. http://dx.doi.org/10.3390/app9183831.

Full text
Abstract:
In this paper, the micro-phasor measurement system is developed to support phasor identification of distribution transformers for the distribution mapping management system (DMMS) of Taiwan Power Company (TPC). The one pulse per second signal (1PPS) from the global positioning system (GPS) is used to synchronize the voltage sampling between reference and measurement sides. By receiving 1PPS from GPS, the phasor measurement of three-phase voltage at the reference site of the substation is stored in the master station with a time-stamp. This paper proposes a timing synchronous module with an embedded temperature compensated crystal oscillator (TCXO) to generate highly accurate timing for field measurement of underground distribution facilities. Mobile communication network is used to compare measurement results between reference and field sides of voltage angle that define distribution transformer phasor. This paper also designs and develops an application for mobile devices by importing DMMS database, which is used to search the attributes of the distribution transformers for measurement at the field. After the transformer phasor is identified, the results are stored in the mobile device to update the attributes of distribution transformers in DMMS.
APA, Harvard, Vancouver, ISO, and other styles
5

Bajwa, Rayan, and Murat Kaya Yapici. "Integrated On-Chip Transformers: Recent Progress in the Design, Layout, Modeling and Fabrication." Sensors 19, no. 16 (August 13, 2019): 3535. http://dx.doi.org/10.3390/s19163535.

Full text
Abstract:
On-chip transformers are considered to be the primary components in many RF wireless applications. This paper provides an in-depth review of on-chip transformers, starting with a presentation on the various equivalent circuit models to represent transformer behavior and characterize their performance. Next, a comparative study on the different design and layout strategies is provided, and the fabrication techniques for on-chip implementation of transformers are discussed. The critical performance parameters to characterize on-chip transformers, such as the Q-factor, coupling factor (k), resonance frequency (fSR), and others, are discussed with reference to trade-offs in silicon chip real-estate. The performance parameters and area requirements for different types of on-chip transformers are summarized in tabular form and compared. Several techniques for performance enhancement of on-chip transformers, including the different types of micromachining and integration approaches stemming from MEMS (microelectromechanical systems) technologies are also analyzed. Lastly, the different uses and applications of on-chip transformers are discussed to highlight the evolution of on-chip transformer technology over the recent years and provide directions for future work in this field.
APA, Harvard, Vancouver, ISO, and other styles
6

Rana, Iqra, Murtaza Ali, Faheem Shafeeque Channar, Munsif Ali, and Mustafa Memon. "PLC Based Load Sharing of Transformers." IJEEIT International Journal of Electrical Engineering and Information Technology 3, no. 2 (February 2, 2021): 25–30. http://dx.doi.org/10.29138/ijeeit.v3i2.1234.

Full text
Abstract:
The transformer is very expensive and bulky power system equipment. It runs and feed the load for 24 hours a day. Sometimes the load on the transformer unexpectedly rises above its rated capacity in that situation the load on the transformer increases and it will be overloaded and current will increase and cause overheating which in results damage the insulation of transformer. That insulation failure resulting in interruption of power supply. The common problems which transformer face is overloading voltage fluctuations and heating effect. It takes lot of time to fix the transformer so that a device need to be introduced a device which would help in automatically sharing of these over voltages. We will try to build an automated transformer sharing system in this project where the transformer current is confined to auxiliary transformer and automatically enters system. There are three transformers working as sources in this project, initially when the main switched ON the load that time load will be shared through the first transformer but when the load on first transformer suddenly increase above its reference value then immediately second transformer connected parallel with first transformer automatically through PLC by busing relay circuit.
APA, Harvard, Vancouver, ISO, and other styles
7

Guo, Zheng Wei, Xiang Li Liu, Xin Ju Guo, Cun Kai Liu, Chuan Jing, Yong Li, and Min Tang. "Research on Pressure Relief Technology of Main Transformer in 220KV Indoor Substation." Applied Mechanics and Materials 873 (November 2017): 279–84. http://dx.doi.org/10.4028/www.scientific.net/amm.873.279.

Full text
Abstract:
Most indoor substations adopt oil-immersed transformers as voltage transformation device. In multiple disadvantage conditions, the flammable gases formed form transformer oil may explode in transformer room. Typical 220kV main transformer room of indoor substation was researched in this paper. An correlation of pressure relief area of the 220kV mail transformer room of indoor substation were presented based on the CFD tool FLACS modeling of the general designing schemes of the State Grid Corporation of China. This research may be used as reference of the pressure relief technology for main transformer rooms of indoor substations.
APA, Harvard, Vancouver, ISO, and other styles
8

Braña, L., A. Costa, and R. Lopes. "Development of a power transformer model for high-frequency transient phenomena." Renewable Energy and Power Quality Journal 19 (September 2021): 217–21. http://dx.doi.org/10.24084/repqj19.260.

Full text
Abstract:
In recent years, the proliferation of distributed renewable energy sources and the application of new rules for the exploitation of electrical networks imposed by the markets have dictated increasingly demanding operating conditions for electric power transformers, creating new challenges in their exploration and conservation. Transformers that, in addition to the transmission lines, are certainly the most important and critical element of any electrical energy system. Adequate models are necessary to accurately describe transformer behavior and internal response when submitted to different external requests imposed by the network, particularly during transient phenomena, as well as, to properly assess system vulnerabilities and network optimization. This effort is being carried out today by several research groups in the world, namely from Cigré and IEEE. In this work, a transformer model to be integrated into a timedomain equivalent circuit is developed and discussed. Results obtained with this model are compared with measurements obtained by the Cigré JWG A2/C4.52 in a power transformer used as a reference for the working group.
APA, Harvard, Vancouver, ISO, and other styles
9

Hu, Yang, and Hui Qi Li. "Experimental Study on Transformer under DC Bias." Applied Mechanics and Materials 556-562 (May 2014): 2186–89. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.2186.

Full text
Abstract:
As the voltage level to improve, DC bias problem of power transformers increasingly prominent. When the DC current affects the transformer, transformer laminated core magnetization characteristics inside will be affected by magnetic saturation increased. Aiming at this problem, the model of the load side and a smart experimental platform are established, for the measurement of related data such as the excitation current under DC bias. Based on MATLAB software, analysis summarized the laws of physics, to provide a reference for theoretical research.
APA, Harvard, Vancouver, ISO, and other styles
10

Mester, Christian. "Optimised calibration programmes for comparators for instrument transformers." tm - Technisches Messen 88, no. 2 (January 15, 2021): 122–31. http://dx.doi.org/10.1515/teme-2020-0086.

Full text
Abstract:
Abstract Traditionally, instrument transformers are calibrated using bridges. By definition, bridges use the null method of measurement. The traditional calibration programme for instrument transformer bridges characterise namely this null measurement. Many new commercial comparators for instrument transformer use a very different method. They sample the secondary signals of reference and device under test (dut) transformer independently. Based on the samples, magnitude and phase of both signals are determined. Ratio error and phase displacement are calculated. Consequently, the significance of their calibration using the traditional calibration programme is limited. Moreover, the operating range of modern comparators is much larger than that of bridges. The additional versatility cannot be used without an adapted calibration programme. This article analyses the calibration programmes for both technologies. An experimental study confirms both the suitability of the new calibration programme and the need to chose the calibration programme depending on the technology of the device to be calibrated. The conclusion is very general and applies to all measurement problems where an operating principle is replaced by another – when changing the operating principle, it is important to check the calibration programme and adapt it if necessary.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Transformers Reference"

1

Slávka, Michal. "Vícejazyčný systém pro odpovídání na otázky nad otevřenou doménou." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2021. http://www.nusl.cz/ntk/nusl-445499.

Full text
Abstract:
Táto práca sa zaoberá automatickým viacjazyčným zodpovedaním na otázky v otvorenej doméne. V tejto práci sú navrhnuté prístupy k tejto málo prebádanej doméne. Konkrétne skúma, či: (i) použitie prekladu z angličtiny je dostačujúce, (ii) multilinguálne systémy vedia využiť preklad otázky do iných jazykov (iii) alebo je výhodnejšie nepoužívať žiaden preklad. Porovnávam použitie anglického systému založeného na modeli T5, ktorý využíva strojový preklad s natívne viacjazyčnými systémami založenými na viacjazyčnom modeli MT5. Anglický systém so strojovým prekladom mierne prekonáva svoje jednojazyčné náprotivky vo viacerých úlohách. Napriek tomu, že tento model bol natrénovaný na väčšom množstve dát zlepšenie nie je dostatočne signifikantné. To ukazuje, že použitie natívne viacjazyčných systémov je sľubným prístupom pre budúci výskum. Tiež prezentujem metódu získavania dokumentov v rôznych jazykoch pomocou algoritmu BM25 a porovnávam ju s anglickým retrievalom. Používanie viacjazyčných dôkazov sa javí ako prospešné a zlepšuje výkonnosť systému systémov.
APA, Harvard, Vancouver, ISO, and other styles
2

Holmberg, Pär. "Modelling the transient response of windings, laminated steel coresand electromagnetic power devices by means of lumped circuits : With special reference to windings with a coaxial insulation system." Doctoral thesis, Uppsala University, Department of High Voltage Research, 2000. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-548.

Full text
Abstract:

Electromagnetic transients impinging on electromagnetic power devices - such as electric machines, transformers and reactors - can stress the design severely. Thus the magnitudes of the transients are often decisive for the design of the devices. Further, the operation of a device can be transient in itself. This is the case for the explosive magnetic flux compression generator (EMG) and a ferromagnetic actuator.

Models are presented that are mainly intended for transients in the millisecond range and faster. Hence, eddy currents and the related skin and proximity effect become significant in windings, magnetic cores and in the armatures of the devices. These effects are important for, e.g., the damping of the transients. Further, the displacement current in the insulation of the winding is significant. It changes the response of the windings dramatically, as it manifests the finite velocity of propagation of the electromagnetic fields. Under such circumstances, reflections and excited resonances can make the transient voltage and current distribution highly irregular.

Induced voltages are modelled with self and mutual inductances or reluctances combined with winding templates. The displacement currents are modelled with capacitances or coefficients of potential. Cauer circuits and their dual form are used to model eddy currents in laminated cores and in conductors. The Cauer circuit enables one to consider hysteresis and the non-linear response of a magnetic core. It is also used to model the eddy currents in the moving armature of an EMG.

A set-up is presented that can be used to study the transient voltage and the current distribution along a coil.

The transient response of coaxially insulated windings is analysed and modelled in detail. A lumped circuit model is developed for a coil, DryformerTM - the new high-voltage transformer - and PowerformerTM, the new high-voltage generator. An alternative model, a combined lumped circuit and FEM model, is presented for a coaxially insulated winding in two slot cores.

APA, Harvard, Vancouver, ISO, and other styles
3

Enright, Wade Grant. "Transformer models for electromagnetic transient studies with particular reference to HVdc transmission." Thesis, University of Canterbury. Department of Electrical and Electronic Engineering, 1996. http://hdl.handle.net/10092/3279.

Full text
Abstract:
In this thesis a formulation for incorporating general magnetic equivalent circuits in electromagnetic transient programs is presented. The formulation is applied to create new single-phase, and the first three-limb three-phase PSCAD-EMTDC program transformer models. The new models proposed are validated with laboratory, factory, and field data. Problems associated with magnetically independent phase representations of three-limb three-phase transformers are discussed. Considerable differences are shown in the behaviour of three-phase bank and three-limb three-phase transformers, particularly for the case of in-rush studies. The new transformer models arc applied to: the first intervalidation of the Harmonic Domain Analysis program with the widely accepted PSCAD-EMTDC program, investigating the division of magnetising current harmonics between transformer windings, and the development of a new means to reduce HVdc converter dc side harmonics; the smoothing transformer. The first set of field measurements from a group connected generator HVdc converter station are presented. A PSCAD-EMTDC model for the group connection is validated with the field data and used to investigate the transient behaviour of three-phase bank and three-limb three-phase converter transformers. Considerable differences are shown in the case of a single-phase ground fault.
APA, Harvard, Vancouver, ISO, and other styles
4

Swamy, Sneha. "Transformation of Object-Oriented Associations and Embedded References to Them." Wright State University / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=wright1218692829.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lujková, Lenka. "Aplikace fuzzy logiky při hodnocení dodavatelů firmy." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2009. http://www.nusl.cz/ntk/nusl-222046.

Full text
Abstract:
This thesis engages in subject matter application of fuzzy logic for rating of suppliers of the firm. This thesis analyses and evaluates competing firms offering to windows exchange and roofing exchange. This thesis can help municipal office in Vážany by decision making, which firm choose.
APA, Harvard, Vancouver, ISO, and other styles
6

Remeš, Filip. "Aplikace fuzzy logiky při výběrů dodavatele." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-232751.

Full text
Abstract:
The diploma thesis employs modern analysing and simulating methods. It enables the application of fuzzy logic in supplier selection and evaluation of its potential risks to construction companies. This work is aimed at defining the problem and determining the overall and particular goals, namely theoretical description of the principle of used artificial intelligence theory, problem description and analysis, current situation as-sessment, proposed solution implementation and evaluation of proposed solution con-tribution.
APA, Harvard, Vancouver, ISO, and other styles
7

Mungroo, Sashnee. "Implementing a world-class sourcing process at Eskom with specific reference to the supplier selection process for large transformers." Thesis, 2005. http://hdl.handle.net/10413/1725.

Full text
Abstract:
The research aims to identify ways to enhance the supplier selection process for large transformers at Eskom. The research was based on the hypothesis that there are significant opportunities to increase the effectiveness and efficiency of transformer purchases at Eskom. Large transformers are a strategic commodity for Eskom, due to the criticality and impact of the commodity on Eskorn's business. Eskom plans to spend R2.2 billion on transformers over the next five years. This indicates a substantial financial spend on the commodity. The opportunities that could be derived from transformer purchases are not only quantitative but also qualitative. The commodity, therefore, requires strategic effort in order to maximise the opportunities. The key findings of the research were as follows: • Transformer purchases and the organisational entity is complex, as it entails numerous stakeholders, complex systems, people and processes. • Eskom has not progressed from 'procurement management' to 'supply management'. • Eskom has a decentralised approach to transformer procurement, despite the strategic nature of the commodity and the fact that it purchases across the three main Eskorn Divisions. Procurement requirements are not consolidated. • There is a lack of communication and collaboration across and within Divisions. • There are no purchasing strategies, methodologies or tools to enhance the procurement process. • Procurement Officers lack knowledge on many well known methodologies, commodity knowledge, market knowledge, and supplier knowledge. • There is no focus on supplier relationship management. • Suppliers have indicated substantial opportunities for transformer procurement at Eskom. Implementing 8 World-Class SourcingProcess at Eskom with specificreference to the SupplifJr Selection Process for Large Transformers Pagei . The key recommendations based on the findings of the research are as follows: • Supply management personnel should be trained in world-class methodologies like total cost of ownership (TeO), strategic sourcing, supplier economics, supplier analysis, market research, etc. • A centralised approach to the procurement of strategic items must be instituted. This should result in a single person being responsible and accountable for Eskom's Supply management. • A collaborative approach must be encouraged by means of cross-functional teams. • Opportunities identified in the research must be implemented by a cross-functional team whom should be responsible and accountable for the implementation of the opportunities identified. • Supplier relationships must be initiated and effectively managed by the cross-functional team leaders. • The implementation must be monitored and tracked by the project sponsor. If the above recommendations are implemented Eskom would realise significant opportunities in large transformer purchases at Eskom. Should the recommendations be implemented on other commodities Eskom would achieve quantum leap improvements to Supply Management.
Thesis (M.Com.)-University of KwaZulu-Natal, 2005.
APA, Harvard, Vancouver, ISO, and other styles
8

Chang, Tsang-Bin, and 張倉賓. "THE ANALYSIS OF ON-LOAD TAP-CHANGER TRANSFORMER REGULATING THE DISTRIBUTION SYSTEM VOLTAGE BY USING DIFFERENT REFERENCE VOLTAGE." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/60866907021517531925.

Full text
Abstract:
碩士
大同大學
電機工程研究所
91
Generally the on-load tap-changer transformers of Taiwan Power Company’s conventional power distribution system only detect and gather the low-voltage side single-phase voltage for reference values. Because the unbalance of distribution system will cause the different three phase voltage that will make the on-load tap-changer transformers inappropriate adjustment of the voltage. The thesis is using DSP collocated wavelet transformation filtering the noise, then calculated the positive voltage accurately as the reference voltage of three-phase voltage transformer to avoid the voltage at the end points of the consumer feeder is too high or too low. The thesis adopts Simulink release 13 to simulate a five bus distribution system. The results of simulation are the comparison between the distribution system voltages that the reference voltages of on-load tap-changer transformer is adopted the single phase voltage and the reference voltages of on-load tap-changer transformer is adopted the positive sequence voltage. According to the results of simulation, using the positive sequence voltage as the reference value of the on-load tap-changer transformer can avoid the inappropriate adjustment of the voltage that was used the single phase as the reference value and the lifetime of tap-changer increase because of the less position shift. Therefore using the positive sequence voltage as the reference value of the on-load tap-changer transformer is the better choice.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Transformers Reference"

1

Electrician's technical reference--transformers. Albany: Delmar Publishers, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Transformers and motors: A single-source reference for electricians. Carmel, Ind: SAMS, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Transformers and motors: A single-source reference for electricians. Indianapolis, Ind: H.W. Sams, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Painting in a world transformed: How modern art reflects our conflicting responses to science and change. Jefferson, N.C: McFarland & Co., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lee, Francis, and Joseph Man Chan. Memories of Tiananmen. NL Amsterdam: Amsterdam University Press, 2021. http://dx.doi.org/10.5117/9789463728447.

Full text
Abstract:
Memories of Tiananmen: Politics and Processes of Collective Remembering in Hong Kong, 1989-2019 analyzes how collective memory regarding the 1989 Beijing student movement and the Tiananmen crackdown was produced, contested, sustained, and transformed in Hong Kong between 1989 and 2019. Drawing on data gathered through multiple sources such as news reports, digital media content, on-site vigil surveys, population surveys, and in-depth interviews with activists, rally participants, and other stakeholders, it identifies six key processes in the dynamics of social remembering: memory formation, memory mobilization, memory institutionalization, intergenerational transfer, memory repair, and memory balkanization. The book demonstrates how a socially dominant collective memory, even one the state finds politically irritable, can be generated and maintained through constant negotiation and efforts by a wide range of actors. While Memories of Tiananmen mainly focuses on the interplay between political changes and the Tiananmen commemoration in the historical period within which the society enjoyed a significant degree of civil liberties, it also discusses how the trajectory of the collective memory may take a drastic turn as Hong Kong’s autonomy is abridged. The book promises to be a key reference for anyone interested in collective memory studies, social movement research, political communication, and China and Hong Kong studies.
APA, Harvard, Vancouver, ISO, and other styles
6

A, Paradis Adrian, ed. Partnership for excellence, 1969-1994: He history of EHV-Weidmann Industries. West Kennebunk, Me: Phoenix Pub., 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Delmar. Electrician's Technical Reference Series Bundle (wiring Methods, Motors, Variable Frequency: Drives Hazardous Locations, Industrial Electronics, Motor Control, Theory And Calculations, & Transformers). Delmar Publishers, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Transforms & regressions: Exact graphs for exact science : Reference manual. Spss, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

A role transformed?: Technology's challenge for job responsibilities of the reference librarian. Ann Arbor, Mich: University Microfilms International, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kamundia, Elizabeth. Kenya. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198786627.003.0010.

Full text
Abstract:
This chapter describes the use of the Convention on the Rights of Persons with Disabilities (CRPD) by Kenyan courts. The chapter analyses fourteen cases in which Kenyan courts have made reference to the CRPD and finds that there is a steady increase in the usage of CRPD provisions by Kenyan courts, particularly since the coming into force of the Constitution of Kenya in 2010 which transformed Kenya into a monist state. The most widespread use of the CRPD is to support a decision that would have been reached anyway, based on other sources; however, in a few cases, the CRPD has significantly impacted on court judgments. The vast majority of references to the CRPD in court cases were references to specific CRPD articles including Articles 2, 4, 5, 12, 26, 27, 28 and 29. Kenyan courts are not currently engaging in a transnational dialogue regarding the CRPD.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Transformers Reference"

1

Nita, Stefania Loredana, and Marius Mihailescu. "Monad Transformers." In Haskell Quick Syntax Reference, 103–10. Berkeley, CA: Apress, 2019. http://dx.doi.org/10.1007/978-1-4842-4507-1_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Barnes, John R. "Inductors and Transformers." In Robust Electronic Design Reference Book, 126–55. New York, NY: Springer US, 2004. http://dx.doi.org/10.1007/1-4020-7830-7_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Vince, John. "Frames of Reference in Space." In Rotation Transforms for Computer Graphics, 143–54. London: Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-154-7_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Vince, John. "Frames of Reference in the Plane." In Rotation Transforms for Computer Graphics, 103–14. London: Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-154-7_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kumari, Madhumita, and Sheela Chandra. "Secondary Metabolite Production in Transformed Cultures." In Reference Series in Phytochemistry, 103–21. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-28669-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Halder, Mihir, and Sumita Jha. "Morphogenesis, Genetic Stability, and Secondary Metabolite Production in Untransformed and Transformed Cultures." In Reference Series in Phytochemistry, 1–60. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-11253-0_15-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Halder, Mihir, and Sumita Jha. "Morphogenesis, Genetic Stability, and Secondary Metabolite Production in Untransformed and Transformed Cultures." In Reference Series in Phytochemistry, 1–60. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-11253-0_15-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Halder, Mihir, and Sumita Jha. "Morphogenesis, Genetic Stability, and Secondary Metabolite Production in Untransformed and Transformed Cultures." In Reference Series in Phytochemistry, 663–722. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-30185-9_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kuźma, Łukasz. "Biosynthesis of Biological Active Abietane Diterpenoids in Transformed Root Cultures of Salvia Species." In Reference Series in Phytochemistry, 1–24. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-11253-0_25-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mitra, Adinpunya, Chiranjit Mukherjee, and Debabrata Sircar. "Metabolic Phytochemistry-Based Approaches for Studying Secondary Metabolism Using Transformed Root Culture Systems." In Reference Series in Phytochemistry, 513–37. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-28669-3_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Transformers Reference"

1

Chen, Y., E. Mohns, H. Badura, P. Rather, and M. Luiso. "Setup and Characterisation of Reference Current-to-Voltage Transformers for Wideband Current Transformers Calibration up to 2 kA." In 2019 IEEE 10th International Workshop on Applied Measurements for Power Systems (AMPS). IEEE, 2019. http://dx.doi.org/10.1109/amps.2019.8897759.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Banerjee, Deepayan, Antra Saxena, and Mohammad Hashmi. "A novel compact tri-band matching network utilizing two dual-band transformers at a common reference frequency." In 2017 IEEE Asia Pacific Microwave Conference (APMC). IEEE, 2017. http://dx.doi.org/10.1109/apmc.2017.8251642.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Juvik, J. I. "Phase displacement correction of reference channel in digital bridge used for calibation of instrument transformers with digital output." In 2010 Conference on Precision Electromagnetic Measurements (CPEM 2010). IEEE, 2010. http://dx.doi.org/10.1109/cpem.2010.5545019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Aggarwal, R. K. "Digital simulation of the transient phenomena in high voltage power transformers with particular reference to accurate fault detection." In International Conference on Simulation (1998). IEE, 1998. http://dx.doi.org/10.1049/cp:19980669.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Houtzager, E., M. Acanski, and G. Rietveld. "Reference setup for the calibration of power transformer loss measurement systems." In 2016 Conference on Precision Electromagnetic Measurements (CPEM 2016). IEEE, 2016. http://dx.doi.org/10.1109/cpem.2016.7540487.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pan, Yang, Lei Lai, Leibing Shi, Yili Wang, Chunfeng Lu, and Yi Qin. "Phase shift correction of reference sampling multimeter for electronic transformer calibration." In 2016 Conference on Precision Electromagnetic Measurements (CPEM 2016). IEEE, 2016. http://dx.doi.org/10.1109/cpem.2016.7540706.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Corney, Andrew C. "Impedance Bridge Ratio Transformer Calibration by Reference-Step Conductance Build-Up." In 2004 Conference on Precision electromagnetic Digest. IEEE, 2004. http://dx.doi.org/10.1109/cpem.2004.305624.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Loomis, Nick, and George Barbastathis. "Space-bandwidth Transfer in Spherical Reference Holography Using Wigner Transforms." In Digital Holography and Three-Dimensional Imaging. Washington, D.C.: OSA, 2009. http://dx.doi.org/10.1364/dh.2009.dmb4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Das, Debi Prasad, Danielle J. Moreau, and Ben S. Cazzolato. "Active control of transformer noise by using power line signal as reference." In 2013 IEEE 8th Conference on Industrial Electronics and Applications (ICIEA 2013). IEEE, 2013. http://dx.doi.org/10.1109/iciea.2013.6566504.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, Du, and Markus Flierl. "Video coding using multi-reference motion-adaptive transforms based on graphs." In 2016 IEEE 12th Image, Video, and Multidimensional Signal Processing Workshop (IVMSP). IEEE, 2016. http://dx.doi.org/10.1109/ivmspw.2016.7528191.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Transformers Reference' for particular source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography