Log in

Relevant bibliographies by topics / Topology Synthesis

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Topology Synthesis'

Author: Grafiati

Published: 10 December 2022

Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Topology Synthesis.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Topology Synthesis"

1

Rynkiewicz, Pedro, Anne-Laure Franc, Fabio Coccetti, Matthias Wietstruck, Christian Wipf, Selin Tolunay Wipf, Mehmet Kaynak, and Gaëtan Prigent. "Ring filter synthesis and its BiCMOS 60 GHz implementation." International Journal of Microwave and Wireless Technologies 10, no. 3 (February 26, 2018): 291–300. http://dx.doi.org/10.1017/s1759078718000156.

Full text

Abstract:

AbstractThe detailed synthesis of a direct access ring filter topology fully controlled with the following targeted specification (center frequency, low transmission zero frequency, and matching level in the passband) is hereby presented. For this topology, the lowest achievable bandwidth is limited by technological constraints. Thereby a solution consisting in adding capacitive loads is proposed. The associated synthesis is also given and discussed. Both syntheses are illustrated with 60 GHz integrated planar filters implemented in the IHP 130 nm BiCMOS technology. Various 3 dB fractional bandwidths from 18 to 8% are targeted, some of them require the implementation of the capacitive loaded solution. The latter allows us to lower the bandwidth limit of the nominal topology as well as to get a high miniaturization, up to 3.4, depending on the capacitance value. Thanks to good measurement results, this implementation highlights the high efficiency, reliability, and versatility of the synthesis without the need of tuning simulations or post-simulations.

APA, Harvard, Vancouver, ISO, and other styles

2

Cantatore, J. L., S. M. Murphy, and D. V. Lynch. "Compartmentation and topology of glucosylceramide synthesis." Biochemical Society Transactions 28, no. 6 (December 1, 2000): 748–50. http://dx.doi.org/10.1042/bst0280748.

Full text

Abstract:

Evidence is presented supporting a model for glucosylceramide formation on the apoplastic side of the plasma membrane in plants. Glucosylceramide synthase and sterol glucosyltransferase were both localized to the plasma membrane. Whereas sterol glucosylation was sensitive to proteolytic enzymes, ceramide glucosylation was not. These results are consistent with our model in which steryl glucoside is synthesized on the cytosolic side of the membrane and then translocated across the membrane where it donates glucose to ceramide.

APA, Harvard, Vancouver, ISO, and other styles

3

Minje Jun, Sungjoo Yoo, and Eui-Young Chung. "Topology Synthesis of Cascaded Crossbar Switches." IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 28, no. 6 (June 2009): 926–30. http://dx.doi.org/10.1109/tcad.2009.2017079.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ho, Edmond S. L., and Taku Komura. "Character Motion Synthesis by Topology Coordinates." Computer Graphics Forum 28, no. 2 (April 2009): 299–308. http://dx.doi.org/10.1111/j.1467-8659.2009.01369.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Capek, Miloslav, Lukas Jelinek, and Mats Gustafsson. "Shape Synthesis Based on Topology Sensitivity." IEEE Transactions on Antennas and Propagation 67, no. 6 (June 2019): 3889–901. http://dx.doi.org/10.1109/tap.2019.2902749.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sandhoff, K. "Topology and regulation of ganglioside synthesis." Neurochemistry International 21 (January 1992): Q5. http://dx.doi.org/10.1016/0197-0186(92)91804-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Zhou, Shizhe, Changyun Jiang, and Sylvain Lefebvre. "Topology-constrained synthesis of vector patterns." ACM Transactions on Graphics 33, no. 6 (November 19, 2014): 1–11. http://dx.doi.org/10.1145/2661229.2661238.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Cui, Rong Jiang, Zong He Guo, Zi Xun Yin, and Song Song Zhu. "Analysis and Design of Lower-Mobility Parallel Mechanism of Non-Symmetrical Based on Variable Topology Theory." Advanced Materials Research 201-203 (February 2011): 1907–12. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.1907.

Full text

Abstract:

First, the branched-chain of parallel mechanism was Classified according to reciprocal screw theory. Then, the introduction of variable topology mechanism theory, with the characteristics of parallel mechanisms themselves, the definition and basic variable topology means of variable topology parallel mechanism were given. With evolutionary theory, the method to design lower-mobility parallel mechanisms of non-asymmetric was proposed based on variable topology mechanism theory .Taking 3-RPS as ideal mechanism and topology synthesis was carried out, besides 2-RPS mechanism were analyzed. The introduction of variable topology mechanism theory provided a theoretical basis and innovative approaches for the synthesis configuration of Lower-mobility parallel mechanisms of non-asymmetric.

APA, Harvard, Vancouver, ISO, and other styles

9

Lu, Yi, Ying Wang, and Ling Ding. "Type synthesis of four-degree-of-freedom parallel mechanisms using valid arrays and topological graphs with digits." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 228, no. 16 (February 24, 2014): 3039–53. http://dx.doi.org/10.1177/0954406214525365.

Full text

Abstract:

The type synthesis of four-degree-of-freedom parallel mechanisms using valid arrays and the valid topology graphs with digits is studied. First, the 12 contracted graphs without any binary links for type synthesis of the four-degree-of-freedom parallel mechanisms are constructed. Second, a complicated derivation of topology graphs with digit is transformed into a simple derivation of array, many valid arrays are derived, and many invalid arrays and invalid topology graphs with digit are determined and removed from the arrays using a compiled program. Third, many valid topology graphs with digit with various basic links are derived from the valid arrays, and the 46 different four-degree-of-freedom parallel mechanisms are synthesized using the valid topology graphs with digit and arrays, in which eight existing four-degree-of-freedom parallel mechanisms are included. Finally, the degree of freedoms of synthesized parallel mechanisms are calculated to verify the correction and effectiveness of type synthesis approach using valid arrays and the valid topology graphs with digit.

APA, Harvard, Vancouver, ISO, and other styles

10

REHIDA, P., and I. KOMISAROV. "COMPARISON OF PLANNING RESULTS USING BUBBLE SCHEDULING AND ALLOCATION (BSA) ALGORITHM FOR DIFFERENT TOPOLOGIES." HERALD OF KHMELNYTSKYI NATIONAL UNIVERSITY 295, no. 2 (May 2021): 89–96. http://dx.doi.org/10.31891/2307-5732-2021-295-2-89-96.

Full text

Abstract:

In this article, the bubble scheduling and allocation algorithm is considered for different types of topologies: grid, hypercube, de Bruijn topology, extended de Bruijn topology based on ternary code. Static planning algorithms are analyzed; the results are presented in the form of a comparative table on the criteria of complexity, the need to find a critical path, the presence of a table of routing and efficiency. The study of the method of planning calculations is carried out based on the problem of finding the roots of systems of linear and nonlinear equations using Cramer’s and Newton’s methods. The corresponding graphs of tier-parallel form are synthesized for these methods. The principles of synthesis for 4 types of topologies are shown. The synthesis of the grid, hypercube, and de Bruijn graph is considered in the classical form. The synthesis of the extended de Bruijn topology is a synthesis of de Bruijn topology [1, 2] using a ternary code. That is, with the same number of processors, the number of connections increases. Experimental studies of the scheduling of the obtained graphs in the synthesized topologies using the method of bubble scheduling and allocation are conducted; the results of scheduling are presented for these topologies. The best results were shown by extended de Bruijn topology based on ternary code due to the increased degree of units, which is especially noticeable for Newton’s method where there are much more data transfers than in Cramer’s method. The topology of a hypercube and de Bruijn topology demonstrated just about same results but hypercube topology did a little better. In addition to this, having a smaller diameter and cost, the hypercube is the most optimal topology and still used today. However, when constructing fail-safe topological organizations, it is better to use topologies based on ternary code, such as the topology based on the extended de Bruijn graph.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Topology Synthesis"

1

Bott, Adrian William. "Clusters : synthesis and topology." Thesis, University of Cambridge, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.316027.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ho, Shu Lim. "Topology-based character motion synthesis." Thesis, University of Edinburgh, 2011. http://hdl.handle.net/1842/5029.

Full text

Abstract:

This thesis tackles the problem of automatically synthesizing motions of close-character interactions which appear in animations of wrestling and dancing. Designing such motions is a daunting task even for experienced animators as the close contacts between the characters can easily result in collisions or penetrations of the body segments. The main problem lies in the conventional representation of the character states that is based on the joint angles or the joint positions. As the relationships between the body segments are not encoded in such a representation, the path-planning for valid motions to switch from one posture to another requires intense random sampling and collision detection in the state-space. In order to tackle this problem, we consider to represent the status of the characters using the spatial relationship of the characters. Describing the scene using the spatial relationships can ease users and animators to analyze the scene and synthesize close interactions of characters. We first propose a method to encode the relationship of the body segments by using the Gauss Linking Integral (GLI), which is a value that specifies how much the body segments are winded around each other. We present how it can be applied for content-based retrieval of motion data of close interactions, and also for synthesis of close character interactions. Next, we propose a representation called Interaction Mesh, which is a volumetric mesh composed of points located at the joint position of the characters and vertices of the environment. This raw representation is more general compared to the tangle-based representation as it can describe interactions that do not involve any tangling nor contacts. We describe how it can be applied for motion editing and retargeting of close character interaction while avoiding penetration and pass-throughs of the body segments. The application of our research is not limited to computer animation but also to robotics, where making robots conduct complex tasks such as tangling, wrapping, holding and knotting are essential to let them assist humans for the daily life.

APA, Harvard, Vancouver, ISO, and other styles

3

Das, Angan. "Algorithms for Topology Synthesis of Analog Circuits." University of Cincinnati / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1227204301.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ivan, Vladimir. "Topology based representations for motion synthesis and planning." Thesis, University of Edinburgh, 2015. http://hdl.handle.net/1842/10520.

Full text

Abstract:

Robot motion can be described in several alternative representations, including joint configuration or end-effector spaces. These representations are often used for manipulation or navigation tasks but they are not suitable for tasks that involve close interaction with the environment. In these scenarios, collisions and relative poses of the robot and its surroundings create a complex planning space. To deal with this complexity, we exploit several representations that capture the state of the interaction, rather than the state of the robot. Borrowing notions of topology invariances and homotopy classes, we design task spaces based on winding numbers and writhe for synthesizing winding motion, and electro-static fields for planning reaching and grasping motion. Our experiments show that these representations capture the motion, preserving its qualitative properties, while generalising over finer geometrical detail. Based on the same motivation, we utilise a scale and rotation invariant representation for locally preserving distances, called interaction mesh. The interaction mesh allows for transferring motion between robots of different scales (motion re-targeting), between humans and robots (teleoperation) and between different environments (motion adaptation). To estimate the state of the environment we employ real-time sensing techniques utilizing dense stereo tracking, magnetic tracking sensors and inertia measurements units. We combine and exploit these representations for synthesis and generalization of motion in dynamic environments. The benefit of this method is on problems where direct planning in joint space is extremely hard whereas local optimal control exploiting topology and metric of these novel representations can efficiently compute optimal trajectories. We formulate this approach in the framework of optimal control as an approximate inference problem. This allows for consistent combination of multiple task spaces (e.g. end-effector, joint space and the abstract task spaces we investigate in this thesis). Motion generalization to novel situations and kinematics is similarly performed by projecting motion from abstract representations to joint configuration space. This technique, based on operational space control, allows us to adapt the motion in real time. This process of real-time re-mapping generates robust motion, thus reducing the amount of re-planning. We have implemented our approach as a part of an open source project called the Extensible Optimisation library (EXOTica). This software allows for defining motion synthesis problems by combining task representations and presenting this problem to various motion planners using a common interface. Using EXOTica, we perform comparisons between different representations and different planners to validate that these representations truly improve the motion planning.

APA, Harvard, Vancouver, ISO, and other styles

5

Gajaweera, Ruwan Naminda. "Coupling matrix synthesis for constrained topology microwave bandpass filters." Thesis, University of Essex, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.399028.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Gallant, M. A. "Synthesis of low-power CMOS circuits using pass logic topology." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp04/mq22764.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kumar, Ashok V. "Shape and topology synthesis of structures using a sequential optimization algorithm." Thesis, Massachusetts Institute of Technology, 1993. http://hdl.handle.net/1721.1/12504.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ali, Baraa Saeed. "HIGH LEVEL SYNTHSIS FOR A NETWORK ON CHIP TOPOLOGY." OpenSIUC, 2013. https://opensiuc.lib.siu.edu/theses/1079.

Full text

Abstract:

Network on chips (NoCs) have emerged as a panacea to solve many intercommunication issues that are imposed by the fast growing of VLSI design. NOC have been deployed as a solution for the communication delay between cores, area overhead, power consumption, etc. One of the leading parameters of speeding up the performance of system on chips (SOCs) is the efficiency of scheduling algorithms for the applications running on a SOC. In this thesis we are arguing that a global scheduling view can significantly improve latency in NoCs. This view can be achieved by having the NoC nodes communicate with each other in a predefined application-based fashion; by calculating in advance how many clock cycles the nodes need to execute and transmit packets to the network and how many clock cycles are needed for the packets to travel all the way to the destination through routers (including queuing delay). By knowing that, we could keep some of the cores stay in "Hold-On" state until the right time comes to start transmitting. This technique could lead to reduced congestion and it may guarantee that the cores do not suffer from severe resource contention, e.g. accessing memory. This task is achieved by using a network simulator (such as OPNET) and gathering statistics, so the worst case latency can be determined. Therefore, if NoC nodes can somehow postpone sending packets in a way that does not violate the deadline of their tasks, packet dropping or livelock can be avoided. It is assumed that the NoC nodes here need buffers of their own in order to hold the ready-to-transmit packets and this can be the cost of this approach.

APA, Harvard, Vancouver, ISO, and other styles

9

Danon, Jonathan Joseph. "Pedal to the metal : high order rotaxanes, catenanes & knots via metal template synthesis." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/pedal-to-the-metal--high-order-rotaxanes-catenanes-and-knots-via-metal-template-synthesis(c311a9ae-f473-491e-bb13-d5a01842dfc0).html.

Full text

Abstract:

Over the past quarter of a century a vast amount of research investigating the synthesis and properties of mechanically interlocked molecules has been reported. This can be largely attributed to the emergence of non-statistical, supramolecular strategies for their synthesis, starting with Jean-Pierre Sauvage’s metal template capture of a catenane – a single molecule comprising two macrocycles which could not be unlinked without breaking a covalent bond. Other molecules possessing interlocked architectures, namely rotaxanes and knots, have also been synthesised and studied. While a variety of other template strategies have been developed over the years, the use of metal ions remains popular and widespread amongst supramolecular chemists due to their diversity as both templates and catalysts. The research presented in this thesis explores that remarkable diversity, demonstrating the rapid progress that has been achieved towards the synthesis of increasingly complex molecules by the continued usage of metal template strategies. Chapter 1 reviews the current state of the art regarding metal template synthesis of mechanically interlocked molecules. Chapter 2 reports the synthesis of doubly-interlocked [2]catenanes (otherwise known as Solomon links) from supramolecular interwoven 2×2 grids. Chapter 3 details progress towards the synthesis of an “endless” knot with seven crossings from an unprecedented interwoven 3×3 grid. Chapter 4 illustrates the use of a circular iron(II) double helicate to construct a highly compact and complex molecular knot with eight crossings. Chapter 5 describes an active metal template strategy for the synthesis of the first [4]rotaxanes containing one ring and three threads.

APA, Harvard, Vancouver, ISO, and other styles

10

Meissner, Markus [Verfasser], Lars [Gutachter] Herdrich, and Helmut [Gutachter] Gräb. "FEATS - Framework for Explorative, Analog Topology Synthesis / Markus Meissner ; Gutachter: Lars Herdrich, Helmut Gräb." Frankfurt am Main : Universitätsbibliothek Johann Christian Senckenberg, 2015. http://d-nb.info/1142233928/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Topology Synthesis"

1

Bunge, Marta. Synthetic Differential Topology. Cambridge University Press, 2018.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bunge, Marta, Felipe Gago, and Ana Mara San Luis. Synthetic Differential Topology. Cambridge University Press, 2018.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Luis, Ana María San, Marta Bunge, and Felipe Gago. Synthetic Differential Topology. Cambridge University Press, 2018.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Topological Polymer Chemistry: Progress of Cyclic Polymer in Syntheses, Properties and Functions. World Scientific Publishing Co Pte Ltd, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Topology Synthesis"

1

Li, Yi, Huaibo Huang, Ran He, and Tieniu Tan. "Topology-Invariant Synthesis." In SpringerBriefs in Computer Science, 25–51. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-9148-4_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Li, Yi, Huaibo Huang, Ran He, and Tieniu Tan. "Topology-Variant Synthesis." In SpringerBriefs in Computer Science, 53–94. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-9148-4_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Frecker, Mary. "Synthesis through Topology Optimization." In Handbook of Compliant Mechanisms, 93–107. Oxford, UK: John Wiley & Sons Ltd, 2013. http://dx.doi.org/10.1002/9781118516485.ch7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hoffmann, Frank, and Michael Fröba. "Network Topology." In The Chemistry of Metal-Organic Frameworks: Synthesis, Characterization, and Applications, 5–40. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2016. http://dx.doi.org/10.1002/9783527693078.ch2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Yang, Ting-Li, Anxin Liu, Huiping Shen, Lubin Hang, Yufeng Luo, and Qiong Jin. "General Method for Structure Synthesis of Serial Mechanisms." In Topology Design of Robot Mechanisms, 157–75. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-5532-4_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Koza, John R. "Automatic synthesis of both the topology and numerical parameters for complex structures using genetic programming." In Engineering Design Synthesis, 319–37. London: Springer London, 2002. http://dx.doi.org/10.1007/978-1-4471-3717-7_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bauer, Jörg, Werner Damm, Tobe Toben, and Bernd Westphal. "Verification and Synthesis of OCL Constraints Via Topology Analysis." In Applications of Graph Transformations with Industrial Relevance, 361–76. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-89020-1_25.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Eberhard, Peter, Timo Gaugele, and Kai Sedlaczek. "Topology Optimized Synthesis of Planar Kinematic Rigid Body Mechanisms." In Advanced Design of Mechanical Systems: From Analysis to Optimization, 287–302. Vienna: Springer Vienna, 2009. http://dx.doi.org/10.1007/978-3-211-99461-0_14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Xu, Wenying, Daniel W. C. Ho, and Jinde Cao. "A Layered Event-Triggered Scheme for Multi-layered Directed Network Topology." In Event-Triggered Cooperative Control: Analysis and Synthesis, 61–75. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-5654-6_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Loutskii, Heorhii, Artem Volokyta, Pavlo Rehida, Artem Kaplunov, Bohdan Ivanishchev, Oleksandr Honcharenko, and Dmytro Korenko. "Topology Synthesis Method Based on Excess De Bruijn and Dragonfly." In Advances in Computer Science for Engineering and Education IV, 315–25. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-80472-5_27.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Topology Synthesis"

1

Yim, Neung Hwan, Seok Won Kang, and Yoon Young Kim. "Synthesis of Gear-Linkage Mechanisms by Topology Optimization." In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-85298.

Full text

Abstract:

This work is concerned with a new mechanism synthesis method for the simultaneous determination of the type, number and dimension of mechanisms by topology optimization. Earlier topology optimization methods can synthesize linkage mechanisms that consist only of links and joints. The proposed synthesis method is a gradient-based topology optimization method useful for the synthesis of planar mechanisms consisting of linkages and gears. To formulate the topology optimization based method, we propose two superposed design spaces as a ground structure: the linkage and gear design spaces. The gear design space is discretized by newly proposed gear blocks while the linkage design space by rigid blocks. The zero-length springs with variable stiffness are used to control the connectivity of blocks, which in turns determines the configuration of the synthesized mechanism. After the proposed topology-optimization-based synthesis formulation is presented, its effectiveness and validity are checked with various synthesis examples.

APA, Harvard, Vancouver, ISO, and other styles

2

Yang, Xiangdong, Dongchao Yang, Jing Xiong, Ken Chen, and Ting-Li Yang. "Topology Synthesis and Classification of Low-Mobility Parallel Mechanisms." In ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/detc2006-99068.

Full text

Abstract:

Topology synthesis of low-mobility parallel mechanisms is an important direction of mechanism research. At present, various systematic methods for topology synthesis have been proposed, and large numbers of new mechanisms that satisfy the motion requirements have been synthesized through step-by-step deducing. However, some fundamental problems are ignored. In this paper, some significant synthesis methods are compared from the aspects of the description of output character, limb structure synthesis and geometrical relationship between limbs. The commonly existent problems are analyzed, including the strict description of the output character of the moving platform and the instantaneous mechanisms in the process of topology synthesis. The limitation of existent methods is also indicated. Moreover, a classifying method for low-mobility parallel mechanisms from the viewpoint of topology synthesis is proposed. This classification has guiding effect for synthesis, analysis and application of parallel mechanisms.

APA, Harvard, Vancouver, ISO, and other styles

3

Pedersen, Claus B. W., Thomas Buhl, and Ole Sigmund. "Topology Synthesis of Large-Displacement Compliant Mechanisms." In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dac-8554.

Full text

Abstract:

Abstract This paper describes the use of topology optimization as a synthesis tool for the design of large-displacement compliant mechanisms. An objective function for the synthesis of large-displacement mechanisms is proposed together with a formulation for synthesis of path-generating compliant mechanisms. The responses of the compliant mechanisms are modelled using a Total Lagrangian finite element formulation, the sensitivity analysis is performed using the adjoint method and the optimization problem is solved using the Method of Moving Asymptotes. Procedures to circumvent some numerical problems are discussed.

APA, Harvard, Vancouver, ISO, and other styles

4

Amarnath, Chitta. "Synthesis of Variable Topology Bar Linkage Mechanisms." In ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/detc2006-99263.

Full text

Abstract:

Several industrial applications require devices to operate in two or more phases with single degree of freedom motion in each phase. Variable topology mechanisms meet such requirements, one typical application of such devices being in circuit breakers. In this paper we discuss the synthesis of such devices for a variety (FSP, ISP and MSP) of motion specifications. The loci of pivots are determined.

APA, Harvard, Vancouver, ISO, and other styles

5

Zhu, Yi, Michael Taylor, Scott B. Baden, and Chung-Kuan Cheng. "Advancing supercomputer performance through interconnection topology synthesis." In 2008 IEEE/ACM International Conference on Computer-Aided Design (ICCAD). IEEE, 2008. http://dx.doi.org/10.1109/iccad.2008.4681630.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Caputi, Antonio, and Davide Russo. "Optimal Synthesis of Topology for Compliant Mechanisms." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10699.

Full text

Abstract:

Abstract The aim of the present work is disclosing a model suitable to provide a new tool for the synthesis of mechanisms and structures. Firstly, a framework will be introduced for the representation of a particular class of mechanisms: compliant mechanisms. For this purpose, the constitutive elements and the relations between the elements are organized in a taxonomy, similar to the ones used for the definition of ontologies. Ontologies have been taken as inspiration for the construction of the general schema for two main reasons: the first one is the need of consistency in the physical models, in order to obtain reliable results. The second reason is that one of the main features of ontologies is modularity, which means that they may be reused, and implemented for the creation of widest classifications. In the proposed framework, mechanisms result from the combination of the constitutive elements, according to a certain topology. The topologies are generated taking in account the defined feasible relations between elements. Once the mechanisms are defined, their behavior, in terms of mechanical response, is calculated and implemented in the schema as well. Finally, a classification of the evaluated mechanisms is provided, correlating the mechanical behavior of the mechanisms to the topological arrangement of their elements, or, in other words, their geometry. This classification may be synthetized in a table which may be query setting the mechanical response (set of deformation allowed or denied as response of a set of generalized forces). The result of the query is the indication of the topology of the mechanism that fits the mechanical response best. The proposed table is a design tool actually, suggesting the constructive form to the designer starting from a functional requirement. Moreover, considering the table of topologies and the physical model with which it was generated, they constitute a synthesis tool for that class of mechanisms, and, ultimately, a topology, and size optimization tool.

APA, Harvard, Vancouver, ISO, and other styles

7

Sigmund, Ole. "Topology Synthesis of Two-Phase Compliant Actuators." In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dac-8553.

Full text

Abstract:

Abstract This paper describes how the topology optimization method can be used as a tool for the synthesis of two-phase compliant actuators. Two materials, one or both being active materials, are distributed in a design domain such that the work performed on an elastic workpiece is maximized. The two-material design is obtained by introducing two variables per element. One variable determines the relative density of material in the element and the other variable determines the material type. Examples demonstrate the design of thermal actuators and gripping mechanisms.

APA, Harvard, Vancouver, ISO, and other styles

8

Davis, Marc G., Ethan Smith, Ana Tudor, Koushik Sen, Irfan Siddiqi, and Costin Iancu. "Towards Optimal Topology Aware Quantum Circuit Synthesis." In 2020 IEEE International Conference on Quantum Computing and Engineering (QCE). IEEE, 2020. http://dx.doi.org/10.1109/qce49297.2020.00036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Zhao, Zhenxin, and Lihong Zhang. "Graph-Grammar-Based Analog Circuit Topology Synthesis." In 2019 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE, 2019. http://dx.doi.org/10.1109/iscas.2019.8702574.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Fujita, Masahiro, and Alan Mishchenko. "Logic synthesis and verification on fixed topology." In 2014 22nd International Conference on Very Large Scale Integration (VLSI-SoC). IEEE, 2014. http://dx.doi.org/10.1109/vlsi-soc.2014.7004155.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Topology Synthesis"

1

Emelyanov, I. I. Method for the synthesis of optimal distributed heat exchange networks of chemical processes based on the superstructure of series-parallel topology. OFERNIO, December 2020. http://dx.doi.org/10.12731/ofernio.2020.24743.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!