Academic literature on the topic 'Tolerance optimization'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tolerance optimization.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Tolerance optimization":
Roubíček, Tomáš. "Constrained optimization: A general tolerance approach." Applications of Mathematics 35, no. 2 (1990): 99–128. http://dx.doi.org/10.21136/am.1990.104393.
G V, Madhavi Reddy, and Sreenivasulu Reddy A. "Assembly Gap Tolerance Calculation Using ANFIS and Cost Function Optimization." International Journal for Research in Applied Science and Engineering Technology 10, no. 2 (February 28, 2022): 1111–17. http://dx.doi.org/10.22214/ijraset.2022.40460.
Xu, Rui, Kang Huang, Jun Guo, Lei Yang, Mingming Qiu, and Yan Ru. "Gear-tolerance optimization based on a response surface method." Transactions of the Canadian Society for Mechanical Engineering 42, no. 3 (September 1, 2018): 309–22. http://dx.doi.org/10.1139/tcsme-2018-0006.
Yang, Longbao, Yuejiao Ma, and Liheng Zhou. "Fault Tolerance Analysis and Optimization of Centralized Control Platform Based on Artificial Intelligence and Optimization Algorithm." Scalable Computing: Practice and Experience 25, no. 4 (June 16, 2024): 2621–27. http://dx.doi.org/10.12694/scpe.v25i4.2918.
IRANI, S. A., R. O. MITTAL, and E. A. LEHTIHET. "Tolerance chart optimization." International Journal of Production Research 27, no. 9 (September 1989): 1531–52. http://dx.doi.org/10.1080/00207548908942638.
Wang, Bingxiang, Xianzhen Huang, and Miaoxin Chang. "Reliability-based tolerance redesign of mechanical assemblies using Jacobian-Torsor model." Science Progress 104, no. 2 (April 2021): 003685042110132. http://dx.doi.org/10.1177/00368504211013227.
Gao, Yuan. "Tolerance analysis and optimization based on 3DCS." Journal of Physics: Conference Series 2137, no. 1 (December 1, 2021): 012070. http://dx.doi.org/10.1088/1742-6596/2137/1/012070.
G V, Madhavi Reddy, Vani S, and Sreenivasulu Reddy A. "Selection of Optimum Assembly Gap Tolerance for Motor Assembly." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (April 30, 2022): 107–12. http://dx.doi.org/10.22214/ijraset.2022.41180.
Balling, Richard J., Joseph C. Free, and Alan R. Parkinson. "Consideration of Worst-Case Manufacturing Tolerances in Design Optimization." Journal of Mechanisms, Transmissions, and Automation in Design 108, no. 4 (December 1, 1986): 438–41. http://dx.doi.org/10.1115/1.3258751.
Liu, Guanghao, Meifa Huang, and Leilei Chen. "Optimization Method of Assembly Tolerance Types Based on Degree of Freedom." Applied Sciences 13, no. 17 (August 29, 2023): 9774. http://dx.doi.org/10.3390/app13179774.
Dissertations / Theses on the topic "Tolerance optimization":
Shehabi, Murtaza Kaium. "Cost tolerance optimization for piecewise continuous cost tolerance functions." Ohio : Ohio University, 2002. http://www.ohiolink.edu/etd/view.cgi?ohiou1174937670.
Yue, Junping. "A computerized optimization method for tolerance control." Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-07112009-040315/.
Jrad, Mohamed. "Multidisciplinary Optimization and Damage Tolerance of Stiffened Structures." Diss., Virginia Tech, 2015. http://hdl.handle.net/10919/52276.
Ph. D.
Arenbeck, Henry. "Efficient Reliability-Based Tolerance Optimization for Multibody Systems." Thesis, The University of Arizona, 2007. http://hdl.handle.net/10150/190380.
Barraja, Mathieu. "TOLERANCE ALLOCATION FOR KINEMATIC SYSTEMS." UKnowledge, 2004. http://uknowledge.uky.edu/gradschool_theses/315.
Chen, Jack Szu-Shen. "Distortion-free tolerance-based layer setup optimization for layered manufacturing." Thesis, University of British Columbia, 2010. http://hdl.handle.net/2429/27268.
Burlyaev, Dmitry. "Design, Optimization, and Formal Verification of Circuit Fault-Tolerance Techniques." Thesis, Université Grenoble Alpes (ComUE), 2015. http://www.theses.fr/2015GREAM058/document.
Technology shrinking and voltage scaling increase the risk of fault occurrences in digital circuits. To address this challenge, engineers use fault-tolerance techniques to mask or, at least, to detect faults. These techniques are especially needed in safety critical domains (e.g., aerospace, medical, nuclear, etc.), where ensuring the circuit functionality and fault-tolerance is crucial. However, the verification of functional and fault-tolerance properties is a complex problem that cannot be solved with simulation-based methodologies due to the need to check a huge number of executions and fault occurrence scenarios. The optimization of the overheads imposed by fault-tolerance techniques also requires the proof that the circuit keeps its fault-tolerance properties after the optimization.In this work, we propose a verification-based optimization of existing fault-tolerance techniques as well as the design of new techniques and their formal verification using theorem proving. We first investigate how some majority voters can be removed from Triple-Modular Redundant (TMR) circuits without violating their fault-tolerance properties. The developed methodology clarifies how to take into account circuit native error-masking capabilities that may exist due to the structure of the combinational part or due to the way the circuit is used and communicates with the surrounding device.Second, we propose a family of time-redundant fault-tolerance techniques as automatic circuit transformations. They require less hardware resources than TMR alternatives and could be easily integrated in EDA tools. The transformations are based on the novel idea of dynamic time redundancy that allows the redundancy level to be changed "on-the-fly" without interrupting the computation. Therefore, time-redundancy can be used only in critical situations (e.g., above Earth poles where the radiation level is increased), during the processing of crucial data (e.g., the encryption of selected data), or during critical processes (e.g., a satellite computer reboot).Third, merging dynamic time redundancy with a micro-checkpointing mechanism, we have created a double-time redundancy transformation capable of masking transient faults. Our technique makes the recovery procedure transparent and the circuit input/output behavior remains unchanged even under faults. Due to the complexity of that method and the need to provide full assurance of its fault-tolerance capabilities, we have formally certified the technique using the Coq proof assistant. The developed proof methodology can be applied to certify other fault-tolerance techniques implemented through circuit transformations at the netlist level
Morales, Reyes Alicia. "Fault tolerant and dynamic evolutionary optimization engines." Thesis, University of Edinburgh, 2011. http://hdl.handle.net/1842/4882.
KANSARA, SHARAD MAHENDRA. "AN EFFICIENT SEQUENTIAL INTEGER OPTIMIZATION TECHNIQUE FOR PROCESS PLANNING AND TOLERANCE ALLOCATION." University of Cincinnati / OhioLINK, 2003. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1069798466.
Izosimov, Viacheslav. "Scheduling and Optimization of Fault-Tolerant Embedded Systems." Licentiate thesis, Linköping University, Linköping University, ESLAB - Embedded Systems Laboratory, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-7654.
Safety-critical applications have to function correctly even in presence of faults. This thesis deals with techniques for tolerating effects of transient and intermittent faults. Reexecution, software replication, and rollback recovery with checkpointing are used to provide the required level of fault tolerance. These techniques are considered in the context of distributed real-time systems with non-preemptive static cyclic scheduling.
Safety-critical applications have strict time and cost constrains, which means that not only faults have to be tolerated but also the constraints should be satisfied. Hence, efficient system design approaches with consideration of fault tolerance are required.
The thesis proposes several design optimization strategies and scheduling techniques that take fault tolerance into account. The design optimization tasks addressed include, among others, process mapping, fault tolerance policy assignment, and checkpoint distribution.
Dedicated scheduling techniques and mapping optimization strategies are also proposed to handle customized transparency requirements associated with processes and messages. By providing fault containment, transparency can, potentially, improve testability and debugability of fault-tolerant applications.
The efficiency of the proposed scheduling techniques and design optimization strategies is evaluated with extensive experiments conducted on a number of synthetic applications and a real-life example. The experimental results show that considering fault tolerance during system-level design optimization is essential when designing cost-effective fault-tolerant embedded systems.
Books on the topic "Tolerance optimization":
L, Palumbo Daniel, Arras Michael K, and Langley Research Center, eds. Performance and fault-tolerance of neural networks for optimization. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.
L, Palumbo Daniel, Arras Michael K, and Langley Research Center, eds. Performance and fault-tolerance of neural networks for optimization. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.
L, Palumbo Daniel, Arras Michael K, and Langley Research Center, eds. Performance and fault-tolerance of neural networks for optimization. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.
Finckenor, J. CORSSTOL: Cylinder optimization of rings, skin, and stringers with tolerance sensitivity. Washington, D.C: National Aeronautics and Space Administration, 1995.
Cakaj, Shkelzen, ed. Modeling Simulation and Optimization - Tolerance and Optimal Control. InTech, 2010. http://dx.doi.org/10.5772/211.
Modeling Simulation and Optimization - Tolerance and Optimal Control. InTech, 2010.
Leondes, Cornelius T. Structural Dynamic Systems Computational Techniques and Optimization: Reliability and Damage Tolerance (Engineering, Technology and Applied Science , Vol 10). Taylor & Francis, 1999.
Pardalos, Panos M., Boris Goldengorin, Gerold Jäger, and Marcel Turkensteen. Calculus of Tolerances in Combinatorial Optimization: Theory and Algorithms. Springer, 2016.
Goberna, Miguel A., and Marco A. López. Post-Optimal Analysis in Linear Semi-Infinite Optimization. Springer London, Limited, 2014.
Postoptimal Analysis In Linear Semiinfinite Optimization. Springer-Verlag New York Inc., 2014.
Book chapters on the topic "Tolerance optimization":
Jiang, Chao, Xu Han, and Huichao Xie. "Interval Optimization Considering Tolerance Design." In Nonlinear Interval Optimization for Uncertain Problems, 247–58. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8546-3_12.
Hadjihassan, Sevgui, Eric Walter, and Luc Pronzato. "Quality Improvement via Optimization of Tolerance Intervals During the Design Stage." In Applied Optimization, 91–131. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-3440-8_5.
Fotakis, Dimitris A., and Paul G. Spirakis. "Machine Partitioning and Scheduling under Fault-Tolerance Constraints." In Nonconvex Optimization and Its Applications, 209–44. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4757-3145-3_14.
Xu, Bensheng, Can Wang, and Hongli Chen. "Functional Tolerance Optimization Design for Datum System." In Lecture Notes in Electrical Engineering, 1427–34. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3648-5_184.
Bosse, Sascha, and Klaus Turowski. "Optimization of Data Center Fault Tolerance Design." In Engineering and Management of Data Centers, 141–62. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-65082-1_7.
Razaaly, Nassim, Giacomo Persico, and Pietro Marco Congedo. "Tolerance Optimization of Supersonic ORC Turbine Stator." In Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power, 78–86. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69306-0_9.
Zavala, Angel E. Muñoz, Arturo Hernández Aguirre, and Enrique R. Villa Diharce. "Continuous Constrained Optimization with Dynamic Tolerance Using the COPSO Algorithm." In Constraint-Handling in Evolutionary Optimization, 1–23. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-00619-7_1.
Lombraña González, Daniel, Juan Luís Jiménez Laredo, Francisco Fernández de Vega, and Juan Julián Merelo Guervós. "Characterizing Fault-Tolerance of Genetic Algorithms in Desktop Grid Systems." In Evolutionary Computation in Combinatorial Optimization, 131–42. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-12139-5_12.
Fotakis, Dimitris A., and Paul G. Spirakis. "Efficient Redundant Assignments under Fault-Tolerance Constraints." In Randomization, Approximation, and Combinatorial Optimization. Algorithms and Techniques, 156–67. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-540-48413-4_17.
Hoffenson, Steven, Andreas Dagman, and Rikard Söderberg. "Tolerance Specification Optimization for Economic and Ecological Sustainability." In Lecture Notes in Production Engineering, 865–74. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30817-8_85.
Conference papers on the topic "Tolerance optimization":
Jayakaran, Christopher, Ragini Patel, Prashant Momaya, K. Roopesh, Umeshchandra Ananthanarayana, and Gautam Sardar. "Taking the Grunt Work Out of Tolerance Optimization." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95579.
Roth, Martin, Markus Johannes Seitz, Benjamin Schleich, and Sandro Wartzack. "Coupling Sampling-Based Tolerance-Cost Optimization and Selective Assembly – An Integrated Approach for Optimal Tolerance Allocation." In ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-88775.
Parkinson, Alan, Carl Sorensen, Joseph Free, and Bradley Canfield. "Tolerances and Robustness in Engineering Design Optimization." In ASME 1990 Design Technical Conferences. American Society of Mechanical Engineers, 1990. http://dx.doi.org/10.1115/detc1990-0015.
Gadallah, M. H., and H. A. ElMaraghy. "The Tolerance Optimization Problem Using a System of Experimental Design." In ASME 1994 Design Technical Conferences collocated with the ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/detc1994-0067.
Shoukr, David Sh L., Mohamed H. Gadallah, and Sayed M. Metwalli. "The Reduced Tolerance Allocation Problem." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65848.
Lavoie, Andrew. "Lichten Award Paper: Variational Tolerance Analysis (VTA) - Design and Manufacturing Optimization Using Statistical Simulation." In Vertical Flight Society 77th Annual Forum & Technology Display. The Vertical Flight Society, 2021. http://dx.doi.org/10.4050/f-0077-2021-16817.
Tsai, Jhy-Cherng, and Chin-Ming Shih. "Computer-Aided Linear Tolerance Analysis and Optimal Tolerance Distribution for Cylindrical Machined Parts." In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/dac-5804.
Chen, Shaoqiang, Hui Wang, and Qiang Huang. "Multistage Machining Process Design and Optimization Using Error Equivalence Method." In ASME 2009 International Manufacturing Science and Engineering Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/msec2009-84359.
El-Haik, Basem, and Kai Yang. "Tolerance Design: An Axiomatic Perspective." In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dac-8706.
Krishnaswami, Mukund, and R. W. Mayne. "Optimizing Tolerance Allocation Based on Manufacturing Cost and Quality Loss." In ASME 1994 Design Technical Conferences collocated with the ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/detc1994-0063.
Reports on the topic "Tolerance optimization":
Olivas, Eric Richard, Michael Jeffrey Mocko, and Keith Albert Woloshun. Target Optimization Study: Tolerance Sensitivity. Office of Scientific and Technical Information (OSTI), April 2020. http://dx.doi.org/10.2172/1615652.
Wang, L., and S. N. Atluri. Automated Structural Optimization System (ASTROS) Damage Tolerance Module. Volume 2 - User's Manual. Fort Belvoir, VA: Defense Technical Information Center, February 1999. http://dx.doi.org/10.21236/ada375881.
Wang, L., and S. N. Atluri. Automated Structural Optimization System (ASTROS) Damage Tolerance Module. Volume 1 - Final Report. Fort Belvoir, VA: Defense Technical Information Center, February 1999. http://dx.doi.org/10.21236/ada375882.
Wang, L., and S. N. Atluri. Automated Structural Optimization System (ASTROS) Damage Tolerance Module. Volume 3. Interface Design Document. Fort Belvoir, VA: Defense Technical Information Center, February 1999. http://dx.doi.org/10.21236/ada375883.
Steirer, K. Xerxes, Angus Rockett, Michael Irwin, and Joseph Berry. Final Technical Report: Multi-Messenger In-situ Tolerance Optimization of Mixed Perovskite Photovoltaics. Office of Scientific and Technical Information (OSTI), March 2021. http://dx.doi.org/10.2172/1772188.
Darling, Arthur H., and William J. Vaughan. The Optimal Sample Size for Contingent Valuation Surveys: Applications to Project Analysis. Inter-American Development Bank, April 2000. http://dx.doi.org/10.18235/0008824.