To see the other types of publications on this topic, follow the link: Toledo Lighting Equipment Company.
Journal articles on the topic 'Toledo Lighting Equipment Company'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 40 journal articles for your research on the topic 'Toledo Lighting Equipment Company.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.
1
Ida, Toshiaki, Michio Negishi, Tunemichi Sekiguchi, Masayuki Takano, Koichiro Nakada, and Hisashi Sato. "Lighting control equipment for Tokyo Electric Power Company R & D Center." JOURNAL OF THE ILLUMINATING ENGINEERING INSTITUTE OF JAPAN 79, Appendix (1995): 255. http://dx.doi.org/10.2150/jieij1980.79.appendix_255.
Full text
2
Boos, George V., and Gleb S. Nikitin. "Comprehensive Modernisation of the Outdoor Lighting System of Nizhny Novgorod: Building the Control System with Smart City Elements." Light & Engineering, no. 03-2022 (June 2022): 4–16. http://dx.doi.org/10.33383/2021-109.
Full textAbstract:
The article describes the largest project of comprehensive outdoor lighting system modernisation in Russia implemented in an old city of Nizhny Novgorod standing on the river Volga. This project involved complete rearrangement of outdoor lighting installations and a modern control system with Smart City elements realization as well as development of the system of architectural lighting of major buildings of the city. Lighting devices with Russian-made LEDbased light sources were designed and used for the first time while implementing this project.The equipment was designed by BL GROUP International Light Engineering Company, manufactured by the plants owned by this holding company, delivered to Nizhny Novgorod and installed within unprecedented short time.New methods and technologies were used when conducting the works, which provided about 76 % of energy saving for outdoor lighting and allowed to create the image of the city emphasising the magnificence of its historic centre. The project was implemented under an energy service agreement without budget funds. As a result, on the residents’ opinion, by the moment of the 800th anniversary Nizhny Novgorod has become brighter, more bustling, safer and more convenient during night time and more attractive for tourists.
3
Syalsya Putri Kumala Sari, Budhi Setianto, Muh. Agus Ainur Rosyid, and Oktofa Setia P. "Identifikasi Faktor Iklim Kerja, Kebisingan, dan Pencahayaan pada Sektor UMKM Kediri." Sehat Rakyat: Jurnal Kesehatan Masyarakat 2, no. 2 (May 30, 2023): 290–99. http://dx.doi.org/10.54259/sehatrakyat.v2i2.1647.
Full textAbstract:
Occupational health and safety is an important aspect that needs to be considered in the company's management system, because it involves activities or activities that protect and maintain the resources or inputs owned by the company such as equipment, facilities and human resources from accidents that can be harmful and detrimental company. UKM Kediri is an association of UMKM, namely UKM Making Tofu, Making Herbal Beverages, Making Crackers, and Self-Service Sales. To run this MSME, each MSME has a way to produce well in different ways. In the production process, UMKM still pays little attention to the physical work environment, specifically in the Working Climate, Noise and Lighting sections. This research is descriptive in nature with a cross-sectional design in this measurement referring to the Minister of Manpower Standard Number 5 of 2018 concerning Occupational Safety. From the results of Identification of Working Climate Factors, Noise, and Lighting in the Kediri MSME Sector that the working climate factors in the cracker oven section and the cracker dough cooking section still exceed the NAB standard. the noise factor in the Soybean Boiling, Tofu Printing, and Herbal Beverage Squeezing Production Sites is close to NAV. the lighting factor in the Production Area for Squeezing Herbal Beverages, the Cracker Printing Area, the Materials Section and the Dough Mixing Container is still insufficient to exceed the NAV. The working climate factor needs to be controlled, the lighting factor is still inadequate, it is necessary to add lighting and noise that exceeds the threshold value, but there are 2 points in the Kediri MSME production process for the need for personal protective equipment (earphones).
4
Demirović, Azelma, and Amir Kurtić. "Achieving Energy Efficiency With Led Lighting." B&H Electrical Engineering 14, no. 2 (December 1, 2020): 86–92. http://dx.doi.org/10.2478/bhee-2020-0017.
Full textAbstract:
Abstract Rational use and energy management is very important for the business of industrial companies. This paper will present some of the measures to establish energy efficiency in the company. The realization of the project of improving energy efficiency by replacing the existing lighting with new, more energy efficient, LED lighting in order to reduce electricity consumption and emissions will be presented. A previous lighting design in the production halls will be presented. Nine production halls will be analysed, as well as a paint shop that requires equipment in Ex proof design. Analysis and modelling of electricity consumption, proposals and measures to improve energy efficiency will also be presented. The choice of appropriate LED lighting and Ex LED lighting with photometric calculations is crucial. This is followed by the determination of energy and economic savings, evaluation of the proposed measures, as well as the calculation of CO2 emission reductions. The management system and monitoring of electricity consumption, as well as future planned measures with LED lighting will also be presented in this paper.
5
Čerčikienė, Irena, Jolanta Jurkevičiūtė, and Dalė Židonytė. "MODERNIZATION OF EQUIPMENT IN CHEMICAL LABORATORY OF VILNIUS COLLEGE." GAMTAMOKSLINIS UGDYMAS / NATURAL SCIENCE EDUCATION 6, no. 1 (March 1, 2009): 55–60. http://dx.doi.org/10.48127/gu-nse/09.6.55.
Full textAbstract:
The authors share the experience of creating a modern chemical laboratory. Production of modern la-boratory equipment is developing in the direction of implementing measurement decrease, measurement pre-cision and microprocessor control of instruments. In the faculty of Agro technologies Vilnius College has equipped a modern chemical laboratory with up-to-date central tables, affinity cabinets of new construction, vibration-proof tables, analytical balance, central ventilation and air conditioning systems. Automatic Titrators „METTLER TOLEDO“ are used for classic volume analysis method – titration. „Thermo Spectronic“, spectrophotometer „Genesys”20 UV-VIS“, AAS model „Buck Scientific 210 VGP“ and spectrometer „Varian 640–IR“ are used to determine the molecular composition of a wide range of organic and inorganic materials (testing water, food products, soil and sewage). The authors of the article express special thanks to the administration of Vilnius College and social partner – Company “Fermentas” for help and support. This modern laboratory provides students of chemical biotechnological analysis with the opportunity to gain practical skills, which will make them sough-after on the labour market and which are essential for their career. Key words: chemical analysis technology, chemical laboratory, analytical balance, automatic titrator, spectrophotometer, spectrometer.
6
Batista Lopes Gonçalves Junior, João, Livia Da Silva Oliveira, David Barbosa de Alencar, and Jorge De Almeida Brito Junior. "Electric Energy Reuse of Plastic Injection Machine Motors for Lighting Circuit in a Manaus-Amazonas Industrial Pole Company." International Journal for Innovation Education and Research 7, no. 10 (October 31, 2019): 637–45. http://dx.doi.org/10.31686/ijier.vol7.iss10.1810.
Full textAbstract:
This work aims to reuse the electric energy used in three-phase induction motors of an industrial plastic injector for the lighting circuit of the same warehouse where the injectors are located, thus eliminating the need to use the energy of the electric company. Any resource that reuses electricity with better efficiency becomes essential today, making it a solution for industries that are thinking of saving the energy used in the productive processes in the manufacture of goods.This project uses a synchronous generator coupled to a three-phase induction motor of a plastic injector, which will reuse the electrical energy used of the induction motor to mechanically drive the synchronous generator, that will be able to generate enough electrical power in its coils for a 47-light shed lighting circuit, thus eliminating the need to use utility power, saving a portion of the energy usage costs on the monthly bill. This installation of the synchronous generator was performed on equipment of the company Moto Honda da Amazônia, which has a 24-hour operating regime for six days a week.
7
Nurjanah, Ayu, and Dhela Iskarina. "Overview of Physical and Chemical Factors in Fertilizer Companies." Indonesian Journal Of Occupational Safety and Health 10, no. 1 (March 17, 2021): 16. http://dx.doi.org/10.20473/ijosh.v10i1.2021.16-24.
Full textAbstract:
Introduction: Fertilizer companies are companies that use large amounts of chemicals, natural gas as raw equipment and assist in the production process, as well as the use of factory equipment with high temperatures and pressures, making companies with high levels of risk. The purpose of this study is to determine the general picture of physical and chemical factors in the work environment and the risks that can occur to workers and companies in fertilizer companies in Indonesia. Methods: This research was conducted using descriptive methods, the object observed in this study is the physical and chemical factors that exist in fertilizer companies. Results : Lighting intensity in all areas of the operational departments of fertilizer companies in Indonesia is only 12%, which is in accordance with the Threshold Limitation Value (TLV). Intensity of noise in the area of the company, as much as 17% is above the Threshold Limitation Value (TLV). The level of dust in this fertilizer company is 33% of the area that exceeds the Threshold Limitation Value (TLV). These three things can increase the risk to health, even increase the intelligence of the workers themselves. In addition to the risks to the workers, these three things can also benefit a company's productivity. Conclusion: All areas of fertilizer companies have risks originating from physical and chemical factors. So it needs to be carried out appropriate control in order to reduce the risks that can occur both for workers and companies.Keywords : dust, ferilizer plant, lighting, noise
8
Sudarto, Ferry, Jahwahir Jahwahir, and Ryan Satria. "SISTEM KONTROL ROLLING DOOR MENGGUNAKAN SMARTPHONE BERBASIS ANDROID OS PADA PT. INDONESIA STANLEY ELECTRIC." CCIT Journal 9, no. 1 (September 29, 2015): 44–50. http://dx.doi.org/10.33050/ccit.v9i1.397.
Full textAbstract:
PT Indonesia Stanley Electric is a company founded to meet the needs of vehicle lighting equipment 2 wheel and 4 wheel PT ISE start molding and light industry preferred the lighting equipment of motor vehicles, and the next stage is planning the manufacture of electronic komponoen motor vehicle. Stanley company headquartered in Japan until now PT ISE has 34 branch companies in several countries outside of Japan. Stanley Company in Indonesia is a subsidiary branch to 24, which is named PT Indonesia Stanley Electric (PT ISE). PT Indonesia Stanley Electric is located at Jl. BhumiMas 1 No. Cikupamas Industrial Area 17, where the company is using the Rolling Door as a means of exit and entry of Forklift who still use manual systems and for operation by pressing the open or close button made by a another operator to operate Rolling Door. Smartphones with Android operating system more widely available in the market at a more affordable price. Android operating system itself is open source operating system that can be modified according to user needs. The control system uses the Android-based smartphone is used to control the Rolling Door from a certain distance without having to interact directly with the Rolling Door. In this study, a prototype device Rolling Door control system automatically uses the Android-based Smartphone controls associated with the program of the microcontroller ATMega8 implanted using the Bluetooth network. In a mechanical system that is functioning there is a DC motor to drive the Rolling Door, the system switches to use proximity switches to determine the stopping point of the system. For electronic systems use 12 volt dc relay circuit, and using bluetooth module HC-05. With this system the user can operate the tool to open and close the Rolling Door via Smartphone, in addition to be used as a means of communication but also used as a device that is communicated to control a hardware device.
9
Ferdinal, Erick, and Sri Surjani Tjahjawati. "Pengaruh Servicescape Terhadap Kualitas Pelayanan." Jurnal Riset Bisnis dan Investasi 3, no. 1 (May 4, 2017): 52–61. http://dx.doi.org/10.35313/jrbi.v3i1.546.
Full textAbstract:
Each company must strive to provide the best service to its customers to win the competition, thus the quality of service becomes one important. To provide good quality services to customers, the physical environment interaction between the company and the customer called with servicescape becomes a consideration. Servicescape dimensions that are measured in this study are aesthetic facilities, lighting, ambiance, layout, equipment, and employees, while for the service quality dimensions that are used in this study are tangible, reliability, responsiveness, assurance and empathy. The purpose of this study is to reveal the influence servicescape on service quality Dana Pensiun Telkom Bandung City. 125 questionnaires distributed, but the data can be taken as many as 116. The data analysis is done is descriptive analysis, regression, and hypothesis testing. Based on the research that has been done, there is a positive influence of servicescape on quality service Dana Pensiun Telkom Bandung.
10
Ferdinal, Erick, and Sri Surjani Tjahjawati. "Pengaruh Servicescape Terhadap Kualitas Pelayanan." Jurnal Riset Bisnis dan Investasi 3, no. 1 (May 4, 2017): 52. http://dx.doi.org/10.35697/jrbi.v3i1.546.
Full textAbstract:
Each company must strive to provide the best service to its customers to win the competition, thus the quality of service becomes one important. To provide good quality services to customers, the physical environment interaction between the company and the customer called with servicescape becomes a consideration. Servicescape dimensions that are measured in this study are aesthetic facilities, lighting, ambiance, layout, equipment, and employees, while for the service quality dimensions that are used in this study are tangible, reliability, responsiveness, assurance and empathy. The purpose of this study is to reveal the influence servicescape on service quality Dana Pensiun Telkom Bandung City. 125 questionnaires distributed, but the data can be taken as many as 116. The data analysis is done is descriptive analysis, regression, and hypothesis testing. Based on the research that has been done, there is a positive influence of servicescape on quality service Dana Pensiun Telkom Bandung.
11
Syeda Mehdia Naqvi, Arfan Bakhtiar, and Manik Mahachandra. "Energy audit of a textile company: A case study of finishing textile." World Journal of Advanced Research and Reviews 22, no. 3 (June 30, 2024): 1040–47. http://dx.doi.org/10.30574/wjarr.2024.22.3.1538.
Full textAbstract:
In the contemporary textile industry, energy efficiency is not just an environmental imperative but also a financial necessity. This study presents a comprehensive energy audit conducted at a leading textile company to identify inefficiencies and propose strategic improvements. Through systematic data collection, regression analysis, and equipment performance evaluation, the audit revealed significant opportunities for energy conservation. Key findings include the potential for substantial energy savings through power factor correction, motor efficiency optimization, and lighting system upgrades. Implementing thermal insulation and steam condensate recovery further underscored the latent energy-saving prospects. Moreover, addressing compressed air leaks emerged as a critical area for reducing energy wastage. The study’s recommendations, grounded in rigorous quantitative analysis, promise to enhance the company’s energy profile and contribute to sustainable industrial practices. The anticipated outcomes of this audit are poised to set a precedent for energy management in the textile sector, with implications for cost savings and environmental stewardship.
12
Rosdiana, Arya Wiyangga Pradana, Muhammad, and Mutammimul Ula. "LAMP MODIFICATION FROM HPLN TO LED TECHNOLOGY FOR SAVING ELECTRICAL ENERGY IN STREET LIGHTING." MULTICA SCIENCE AND TECHNOLOGY (MST) JOURNAL 3, no. 1 (April 13, 2023): 161–68. http://dx.doi.org/10.47002/mst.v3i1.423.
Full textAbstract:
Energy Efficiency is a business that is carried out with the aim of reducing the amount of energy needed, in using an equipment or even an energy-related system. In its development in the field of lighting, LED (Light Emitting Diode) lamps are now starting to be used as lighting lamps for homes, industries and factories. In Indonesia, the use of LED lamps in lighting is still rarely used, because the price of LED lamps is quite expensive when compared to ordinary lamps. With the saving of electric power through the use of LED lights, the problem of operational costs will be easy to overcome. Indeed, the price of this LED lamp is a little expensive, but with the research on the comparison of the use of this LED lamp with HPL-N type lamps, the industry will consider using this LED lamp with a generally accepted application method to reduce energy expenditure. The previous conditions for Jalan Dolok Merawan used HPLN 250 Watt lamps with a handlebar angle of 24,920 ornaments, the resulting light intensity was 2189 Candela, the intensity of the resulting lighting was 97.94 Lux and has now been changed to make it more optimal to use 120 Watt LED type lights, the height of the pole used is 4 meterss with an ornament handlebar angle of 24.920, light intensity of 1242 Candella, lighting intensity of 55.33 lux. The results of this illumination intensity are in accordance with the standard determined by BSN SNI regarding Collector road class 3-7 Lux. The results achieved after the process of modifying HPL-N lamps to LEDs are that they can reduce the use of electrical energy in the lighting system and achieve efficiency for electric power consumption so that they can provide added value to the company in reducing the company's operational costs.
13
Hartawan, Dedi. "Pengaruh Lingkungan Fisik, Lingkungan Non Fisik, dan Keterampilan terhadap Produktivitas Kerja Karyawan CV Semeru Jaya Teknik Palembang." Jurnal Keuangan dan Bisnis 17, no. 2 (October 24, 2019): 52. http://dx.doi.org/10.32524/jkb.v17i2.542.
Full textAbstract:
Humans as one of the components of the organization are the determinants of achieving the organization's vision and mission. For productivity to be maximally achieved an organization must pay attention to the physical environment, non-physical environment and skills. The condition of the work environment that is owned by a company will affect the success or failure of a job that is indicated by the ability of employees to complete work to achieve company goals. The availability of a physical work environment (cleanliness, lighting, air exchange, security, equipment, and or work equipment, and noise) that supports can affect the level of work productivity of employees. Partially the physical work environment has a positive and significant effect on employee productivity. Partially the non-physical work environment calculation shows that the non-physical work environment has a negative influence on employee work productivity. Partially Skills for Employee Productivity of CV. Semeru Jaya Teknik Palembang obtained showed that the non-physical work environment had a negative influence on employee work productivity. It was concluded that the non-physical work environment was felt to be able to support employees in completing the work so the employees would feel satisfied at work, and vice versa.
14
Sadchenko, Oleksandr, and Oleksandr Shevchenko. "CLASSIFICATIONS OF JUDICIAL COMPANY EXPERTISE." Criminalistics and Forensics, no. 67 (August 9, 2022): 596–606. http://dx.doi.org/10.33994/kndise.2022.67.61.
Full textAbstract:
The analysis of the practice of using special commodity knowledge shows that for research at the present level it is necessary to develop theoretical problems, among which the classification of forensic examinations is relevant. The authors offer their own classification of forensic examinations on various grounds. 1. According to the degree of generalization, subordination, forensic examinations should be divided into: class, genera, species and subspecies. Class: commodity examinations. Types: a) commodity examination of food products; b) commodity examination of non-food products; c) commodity examination of works and services. Types (subspecies): a) commodity examination of food products is divided into: – examination of goods of plant origin; – examination of goods of animal origin; – examination of goods of mixed origin. b) commodity examination of non-food (industrial) goods is divided into: – examination of consumer goods (consumer goods); – transport and commodity examination (auto commodity; examination of military vehicles; examination of vessels; examination of aircraft); – examination of machines, equipment, raw materials (examination of military property, machinery and weapons); – examination of real estate, real estate (examination of integral property complexes; examination of buildings; expert monetary valuation of land plots (shares)); – examination of cultural values; – examination of objects of painting and applied arts (examination of objects of painting and graphics; examination of sculpture; examination of objects of folk crafts; examination of objects of table setting, etc.); – examination of watches; – examination of securities goods; – examination of goods of property rights to intellectual property (examination of audiovisual products and software); – examination of clothing (examination of knitwear; examination of garments; examination of textiles; examination of fur products; examination of leather products; examination of outerwear, etc.); – examination of fur products; – examination of perfumery and cosmetics; – examination of shoes; – examination of haberdashery (examination of leather haberdashery); – examination of household appliances (examination of photo, radio and video equipment; examination of computers; examination of household electric lighting, etc.); – examination of furniture products; – examination of facilities (livestock, poultry and other live animals); – examination of goods of the construction group; – examination of printed products (examination of books and printing products, etc.); – examination of jewelry (examination of articles of precious metals; examination of articles of precious stones); – examination of stationery; – examination of medical equipment; c) commodity examination of services. 2. Classification of forensic commodity examinations by type of problem to be solved: – commodity examination, to solve classification problems (determination (establishment) of compliance: commodity characteristics of the studied objects with basic data (registers, etc.), data of similar products, marking data recorded on labels or tags, belonging to the same type or article); – commodity examination, to solve diagnostic problems (establishment: the presence of defects and their impact on product quality; compliance (non-compliance) of quality characteristics of products with standard and reference requirements; factual data related to compliance (non-compliance) with the rules of packaging, labeling, storage, transportation, rejection, revaluation and reduction of the price of goods). 3. Classification of forensic commodity examinations by type of object under study: – commodity examination, the objects of research of which are directly only products (commodity origin); – commodity examination, the objects of research of which are only documents (they reflect the state of the goods, the processes that took place with it, commodity transactions, etc.) (circulating name– “examination of documents”); – commodity examination, the objects of study of which are mixed objects (products; samples of products; documents which reflect information about the peculiarities of the origin of goods (certificates, quality certificates, technical passports, labels, etc.), freight (shipping) documents, acceptance or warehouse documents, claim materials, etc.). Key words: forensic examination, classification of forensic examinations, special commodity knowledge, commodity specialist, examination of food and non-food products.
15
Graillet, Olivia, Denis Genon-Catalot, Pierre-Olivier Lucas de Peslouan, Flavien Bernard, Frédéric Alicalapa, Laurent Lemaitre, and Jean-Pierre Chabriat. "Optimizing Energy Consumption: A Case Study of LVDC Nanogrid Implementation in Tertiary Buildings on La Réunion Island." Energies 17, no. 5 (March 6, 2024): 1247. http://dx.doi.org/10.3390/en17051247.
Full textAbstract:
In the context of an insulated area with a subtropical climate, such as La Réunion island, it is crucial to reduce the energy consumption of buildings and develop local renewable energy sources to achieve energy autonomy. Direct current (DC) nanogrids could facilitate this by reducing the energy conversion steps, especially for solar energy. This article presents the deployment and efficiency evaluation of a 48 VDC low-voltage direct current (LVDC) nanogrid, from conception to real-world installation within a company. The nanogrid consists of a photovoltaic power plant, a lithium–iron–phosphate (LFP) battery, and DC end-use equipment, such as LED lighting and DC fans, for two individual offices. For identical test conditions, which are at an equivalent cabling distance and with the same final power demand, the total power consumed by the installation is measured for several stages from 50 to 400 W, according to a 100% DC configuration or a conventional DC/AC/DC PV configuration incorporating an inverter and AC/DC converter. The methodology used enables a critical view to be taken of the installation, assessing both its efficiency and its limitations. Energy savings of between 23% and 40% are measured in DC for a power limit identified at 150 W for a distance of 25 m. These results show that it is possible to supply 48 VDC in an innovative way to terminal equipment consuming no more than 100 W, such as lighting and air fans, using the IEEE 802.3 bt power over ethernet (PoE) protocol, while at the same time saving energy. The nanogrid hardware and software infrastructure, the methodology employed for efficiency quantification, and the measurement results are described in the paper.
16
Tang, Yihong, Baowen Wei, Bin Du, An Li, and Chaoyang Jin. "Research on the Applicability of Integrated Earth Lifting Machine for 500KV Transmission and Substation Project in Highland Area." Frontiers in Sustainable Development 3, no. 12 (December 22, 2023): 23–27. http://dx.doi.org/10.54691/tyqgy237.
Full textAbstract:
In the power construction project, the tower foundation deep pit operation is a fundamental and important process, because of its operation point of the geological foundation structure complex and changeable, large amount of work, many dangerous factors and difficult to observe and identify, the construction is easy to cause safety accidents. State Grid Gansu Power Company has developed a set of intelligent equipment for deep foundation pit operation which is easy to operate, safe, reliable and complete in function, relying on the equipment to actively and timely discover the danger and early warning, and automatically take effective measures to strengthen the protection of personnel, crack the problem of safe operation of deep foundation pit and prevent the occurrence of infrastructure safety accidents. Since this project is located in the plateau area of Tibet, it is intended to study the applicability of the integrated deep foundation pit operation intelligent machine in the plateau area through this project. This project adopts "integrated deep pit operation intelligent machine"; this equipment is specially designed for a series of problems encountered in deep pits and other limited spaces, it integrates a number of practical functions: electric lifting, real-time gas detection, intelligent air supply, automatic sound and light alarm, emergency rescue, differential hanging point, soft ladder hanging point, lighting power, etc. It aims to protect the lives of construction personnel, improve the safety and reliability of construction, enhance construction efficiency, and is a kind of equipment with convenient transportation, installation and operation, diversified and integrated functions and intelligent control.
17
Istiqomah, Meita Selina, and Indi Djastuti. "Study of Green Human Resource Management Implementation on Employees of PT. Telkom Indonesia Tbk." Eduvest - Journal of Universal Studies 2, no. 6 (June 20, 2022): 1153–63. http://dx.doi.org/10.59188/eduvest.v2i6.466.
Full textAbstract:
The occurrence of global warming and climate change has caused a commotion around the world, applying the principle of going green is not something that only has to be done in the personal environment but must be done anywhere including in the work environment. Currently, the company provides many opportunities for employees to implement go green behavior. From customizing the office lighting system to the type of office equipment they will choose and use, at least there are many things they can do to make the office environment more environmentally friendly. The idea of introducing a go green initiative into the workplace can seem a little difficult at first. While it can be difficult trying to figure out where to start, there are actually many ways that companies can be more environmentally friendly in the office environment without major cost implications with long term benefits for both the company and employees. The application of environmentally friendly behavior in human resource management is also called Green Human Resources Management (GHRM). This study examines a state-owned enterprise (BUMN) engaged in the information and communication technology (ICT) service industry, namely PT Telkom Indonesia TBK. This research focuses on the types of GHRM practices implemented in the company environment, the factors that encourage companies to implement GHRM practices, employee understanding of these practices between generations such as baby boomers, gen x, and gen y, efforts and socialization of the company so that GHRM practices continue. The results found in this study that there have been several GHRM practices that have been carried out but for the understanding of the term GHRM it is not understood by the baby boomers generation. Employees in this generation are more familiar with the term go green.
18
Baev, Sergei S., Sergei E. Nikolaev, Yuri A. Barbar, and Konstantin A. Tomsky. "Russian-Made Wireless Lighting and Microclimate Monitoring and Control Systems Accounting for Features of Museum Premises." Light & Engineering, no. 01-2023 (February 2023): 18–23. http://dx.doi.org/10.33383/2022-061.
Full textAbstract:
Microclimate and light environment monitoring systems form a relatively new (emerging) hightech market segment in Russia. Projects being implemented in Russia include microclimate control based on imported equipment, while intelligent lighting systems are not produced at all. The barriers preventing the segment from growing also include lack of standards (each company develops its own technology) and inability of the Russian-produced measuring instruments registered in the State Register to work as part of such systems. These all are the key aspects are taken into account when making decisions regarding automation. Based on its proprietary developments, TKA has manufactured microclimate monitoring systems and introduced the same in museum and library premises (with wall thickness of up to 1 m, high remoteness of the premises (buildings) and other specific conditions). In particular, the specific features of buildings and some premises of the Library of the Academy of Sciences required pre-testing in order to determine permeability of walls and doors in terms of wireless communication. As a result, in the course of project development, it was found that it was necessary to install 8 repeaters to enable reliable radio signal passage. The goal of the ongoing study is to create a native system with adjustable operation conditions, number of sensors, selection of monitored parameters and their metrological characteristics, which would increase the accuracy of metrological monitoring in museum, library and archive premises as well as in greenhouse facilities and in urban and industrial infrastructural facilities by means of the lighting environment spectrometric and radiometric analysis and intelligent microclimate control.
19
Karlina, Putri Maysi, Rafiah Maharani, and Dyah Utari. "Faktor-Faktor yang Berhubungan dengan Gejala Sick Building Syndrome (SBS)." JURNAL ILMIAH KESEHATAN MASYARAKAT : Media Komunikasi Komunitas Kesehatan Masyarakat 13, no. 1 (March 6, 2021): 46–55. http://dx.doi.org/10.52022/jikm.v13i1.126.
Full textAbstract:
Abstrak
Latar Belakang: Sick Building Syndrome (SBS) merupakan kumpulan gejala yang dirasakan oleh orang-orang yang berada di dalam gedung. Manusia menghabiskan 70-80% waktunya di dalam ruangan, hal tersebut dapat menyebabkan masalah kesehatan seperti kelelahan dan berdampak pada efektifitas pada pekerjaan. Tujuan penelitian ini untuk mengetahui hubungan antara pendingin ruangan atau AC, ventilasi, pencahayaan, suhu, kelembaban, bising, umur, jenis kelamin, psikososial dan masa kerja dengan SBS.
Metode: Penelitian ini dilakukan dengan Studi Literature Review. Penelitian dilakukan dengan cara penelusuran data dengan topik faktor-faktor yang berhubungan dengan sick building syndrome seperti pencahayaan dan suhu. Penelusuran dilakukan melalui Google Scholar tahun 2013 – 2020.
Hasil: Hasil penelitian menunjukkan bahwa AC, ventilasi, psikososial, pencahayaan, suhu, kelembaban dan kebisingan, umur dan jenis kelamin, serta masa kerja merupakan faktor-faktor yang berhubungan secara signifikan dengan Sick building syndrome.
Kesimpula: hasil analisis menunjukkan adanya hubungan antara SBS dengan pendingin ruangan atau AC, ventilasi, pencahayaan, suhu, kelembaban, bising, umur, jenis kelamin, psikososial dan masa kerja. Saran pekerja melakukan olahraga secara teratur dan tidak melakukan pekerjaan yang berlebihan. Instansi terkait melakukan pemeriksaan dan perawatan secara rutin peralatan dan perlengkapan kerja.
Factors Related to Sick Building Syndrome (SBS)
Abstract
Background: Sick Building Syndrome (SBS) is a collection of symptoms felt by people living in a building. Indoors, people spend 70-80 per cent of their time, this can cause health issues like fatigue and affect productivity in the workplace. The purpose is determine whether a relationship exists between air conditioners, ventilation, lighting, temperature, humidity, noise, age, gender, psychosocial and work period with sick building syndrome.
Methods: This Study is a literature review study. The study that tracks data of factors related to sick building syndrome like lighting and temperature. The data tracking with Google Scholar published in 2013-2020.
Result: The results showed that air conditioning, ventilation, psychosocial conditions, lighting, temperature, humidity and noise, age and sex, and years of service were all factors that were significantly associated with Sick Building Syndrome.
Conclusion: The study showed a relationship between air conditioners, ventilation, lighting, temperature, humidity, noise, age, sex, psycho-social and work period with sick building syndrome. Reccomended to workers do daily exercise and do not unnecessary work. Routine inspection and repair of equipment and materials for work is carried out by the company.
20
Kaltenbrunner, Andrea. "Waldbrandprävention im Kanton Graubünden | Forest fire prevention in Canton Grisons." Schweizerische Zeitschrift fur Forstwesen 161, no. 11 (November 1, 2010): 460–64. http://dx.doi.org/10.3188/szf.2010.0460.
Full textAbstract:
Thanks to fast alarm systems and modern fire-fighting equipment most forest fires can be extinguished while still very small. Nevertheless, the fire brigade and forest organisations in the Grisons are recurringly confronted with larger fires. Over the past twenty years the Grisons Forestry Service and the fire section of the cantonal Building Insurance Company have invested in fire prevention and improved fire-fighting techniques. To monitor and assess the risk of forest fires, the computer-aided forest fire forecasting system “Incendi” was developed. On its basis, regional forest fire risk maps are drawn up and bans on the lighting of fires are imposed. For use in case of fire, the Forestry Service has drawn up maps of the whole Canton Grisons showing water supply points in and near the forest. Where there are gaps in the water supply, artificial water sources are being created. Fifteen years ago a concept of forest fire-fighting bases was elaborated. The most important elements of this concept are the 18 regional depots of mobile fire-fighting material, which in case of emergency can be transported where needed. The present-day administrative structures and the precautionary measures taken in the Grisons fulfil the conditions for efficient forest fire prevention and control.
21
Abolarin, S. M., Manasseh Babale Shitta, O. Gbadegesin, Chimaobi Daniel Nna, Charles Asirra Eguma, Babatunde Onafeso, and Oluwole Adegbenro. "An Economic Evaluation of Energy Management Opportunities in a Medium Scale Manufacturing Industry in Lagos." International Journal of Engineering Research in Africa 14 (March 2015): 97–106. http://dx.doi.org/10.4028/www.scientific.net/jera.14.97.
Full textAbstract:
This paper seeks to increase interest level on energy efficiency by bringing to fore payback-period assessment of implementing energy-efficient measures that could help achieve sustainable production processes in a typical medium scale printing manufacturing industry in Lagos, Nigeria. Several energy efficiency measures have been suggested based on identifiable energy management opportunities within this industry. The method used for the economic evaluation and feasibility study is payback period; this approach is aimed at providing guidance for a quick and informed decision on the implementation of the energy efficiency measures identified. The payback for two of these measures namely; turning off equipment when not in use and replacement of drive belts on large motors with energy efficient cog belts, have been found to be immediate. When standard fluorescent lighting and incandescent bulbs are replaced with energy efficient lamps and bank of capacitors are installed to improve the power factor of the motors, the company will recoup its initial investment in less than one year. Also, purchasing and installing an advanced electronic meter with data logging capability to help monitor electrical demand has been shown to give the highest payback of 2.4 years. These payback period results have indicated that investment in the recommended energy efficient technologies are economically viable and worthy of implementation. With this analysis, management of manufacturing industries can now make informed economic decision towards productivity improvement and sustainability.
22
Mohamad Munir, Zulhazmi Hatta, Norasikin Ahmad Ludin, Mirratul Mukminah Junedi, Nurfarhana Alyssa Ahmad Affandi, Mohd Adib Ibrahim, and Mohd Asri Mat Teridi. "A Rational Plan of Energy Performance Contracting in an Educational Building: A Case Study." Sustainability 15, no. 2 (January 11, 2023): 1430. http://dx.doi.org/10.3390/su15021430.
Full textAbstract:
Energy performance contracting (EPC) is the best solution for an educational building to implement energy conservation measures (ECMs) because of its high capital expenditure and operational expenditure needed for retrofit and maintenance. It is also considered a win–win mechanism for organising building energy efficiency retrofit projects. It aims to assist educational buildings in acquiring new high-efficiency equipment and maximising energy use reduction, as guaranteed by energy service company (ESCO). This study developed an EPC model using regression analysis, in which the inputs are based on the data collected during the preliminary energy audit in University A. As a result, with a quantum sharing ratio of 0.95/0.5 for ESCO/University A, the forecasted energy savings from the proposed ECMs, chiller optimisation and replacement, lighting retrofit, and energy management system are estimated to save 25.6% energy use, which reduces 5,672,057 kilowatt-hour (kWh) in electricity consumption; saves RM 2,762,291.76/year; carbon dioxide (CO2) mitigation equal to 3,771,061.22 kgCO2/year; return of investment of 4.2 years with a 5% interest rate; and building energy intensity of 93.55 kWh/m2/year. A sensitivity analysis of various quantum sharing ratios found that the saving value of ESCO is inversely proportional to that of University A as the client when the quantum sharing ratio for the former is increasing.
23
Sasmito, Cahyo, and Adelvia Nabunome. "ANALISIS KUALITAS PELAYANAN PUBLIK (STUDI KEPUASAN PELANGGAN PADA PLN-RAYON SOE DI WILAYAH KERJA PUSKESMAS TOBU, KABUPATEN TIMOR TENGAH SELATAN)." REFORMASI 8, no. 2 (November 12, 2018): 136. http://dx.doi.org/10.33366/rfr.v8i2.1100.
Full textAbstract:
The quality of public services that given low by the Limited Liability Company (PLN) on Soe Rayon as a service provider in the field of electricity for the people in South Timor Tengah District, causes public as the customers dissatisfaction.In real terms, the public dissatisfaction is caused by frequent power cuts, which can damage and by the same time disrupt the public activities. Electricity is one of the basic needs in people's daily lives, the function of electricity is used for: energy sources for electronic equipment, lighting, cooking, and as a support in providing health services and so on. The research was conducted at PLN SoeRayon for 4 months, from January to April 2016. This research used Qualitative Descriptive as the approach technique, and purposive sampling as the sampling technique. Primary and secondary data are the types of data sources, while the monitoring instrument uses interview guidelines, which are supported by observation and documentation. Data Analysis used Interactive Model Miles and Huberman, data collection through: data reduction followed by data presentation, and finally conclusions. The results of the analysis in this research indicated that: the quality of existing public services at PLN Soe Rayon was unsatisfactory, Its due to frequent occurrence of power out ages, and the slow service provided by Sub Rayon, and the transactions pay ofworse electricity. The inhibiting factor in providing services at PLN Soe Rayon is the electrical energy sources lack, thenthe natural factors that do not support, and on the other one is there’s theft on this distict, and also the lack of employees. While the supporting factors, physical facilities are sufficient, which have been given to people who are PLN's SoeRayon customers and the ability of employees who are ready to give their good service to the customers.The low quality impact of services provided by the State Electricity Company to customers in the Tobu Health Center, and generally the people of Timor Tengah Selatan Regency is the decline of customer trust to the PLN.
24
Firmansyah, Ruri, Sismulyanto Sismulyanto, and Nurwijayanti Nurwijayanti. "Analysis of Factors that Affect Employee Work Accidents at PT. Windu Blambangan Sejati (WBS) Banyuwangi Regency 2018." Journal for Quality in Public Health 3, no. 2 (May 10, 2020): 300–308. http://dx.doi.org/10.30994/jqph.v3i2.77.
Full textAbstract:
Workplaces always have various hazard factors that can affect the health of the workforce or can cause work-related disorders or illnesses. Accidents, the essence is an unexpected event and certainly not expected by anyone. These unexpected events, obviously not a form of intentional and not planned in advance. Accidents arise as a result of managing potential hazards and risks to low occupational safety and health. The purpose of the study was to analyze the factors that influence employee work accidents at PT. Windu Blambangan Sejati (WBS) Banyuwangi Regency. The research design used was cross sectional. The research population is all employees of PT. Windu Blambangan Sejati (WBS) Banyuwangi Regency and a large sample of 81 people using simple random sampling. Data collection using questionnaire sheets was then analyzed using logistic regression tests. The results showed that there was an influence of skills on workplace accidents (p-value = 0.027 <0.05). There is an influence of experience on workplace accidents (p-value = 0.043 <0.05). There is an influence of discipline on workplace accidents (p-value = 0.040 <0.05). There is an influence of Technical factors (availability of equipment) on workplace accidents (p-value = 0.003 <0.05). There is no effect of lay out on work accidents (p-value = 0.420> 0.05). There is no effect of lighting on work accidents (p-value = 0.944> 0.05). There is no noise effect on work accidents (p-value = 0.084> 0.05). Based on these studies, company management pays more attention to these three factors, namely human, technical and environmental by conducting periodic and periodic maintenance
25
Pikalov, Sergey V., Evgeny V. Ageev, and Anna E. Ageeva. "Development and Research of High-Strength High-Speed Steels Based on Electroerosion Dispersed Alloy Particles R6M5." Proceedings of the Southwest State University. Series: Engineering and Technologies 11, no. 4 (2021): 53–67. http://dx.doi.org/10.21869/2223-1528-2021-11-4-53-67.
Full textAbstract:
The purpose of this study was to conduct metallographic studies of high-strength high-speed steels based on elec-troerosion dispersed particles of alloy R6M5. Methods. Electrodispersion of the R6M5 alloy waste was carried out in a metal waste disperser patented by the authors (RF Patent No. 2449859). Lighting kerosene was used as the working fluid. The fusion of the electroerosion charge was carried out in the spark plasma fusion system SPS 25-10 "Thermal Technology" (USA). The tasks set in the work were solved using modern equipment and complementary methods of physical materials science, including: the elemental composition of high-speed steels was studied on an energy dispersive X-ray analyzer of the company "EDAX" (Netherlands), embedded in a scanning electron microscope "QUANTA 200 3D" (Netherlands); the phase composition of high-speed steels was studied on an X-ray diffractometer "Rigaku Ultima IV" (Japan); The microstructure of the alloys was studied using an electron-ion scanning (scanning) microscope with field emission of electrons "QUANTA 600 FEG" (Netherlands). Results. It has been experimentally established that high-speed steels made of electroerosion dispersed waste particles of alloy P6M5 have the following characteristics: fine-grained structure without pores, cracks and discontinuities; the main elements are Fe, W, Cr, Mo and C; the main phases are Fe3C, Mo2C, Fe, W, Cr. Conclusion. A complex of metallographic studies of new high-speed steels produced by spark plasma fusion of powders obtained by electroerosive dispersion of alloy R6M5 waste in kerosene has shown high efficiency of using spark plasma fusion technology to provide high mechanical properties to high-speed steels from electroerosion dispersed particles of alloy R6M5 waste.
26
Ageeva, E. V., V. I. Serebrovskiy, E. V. Ageev, and V. A. Konchin. "WEAR-RESISTANT POWDER MATERIALS FOR PLASMA-POWDER SURFACING." Tekhnicheskiy servis mashin, no. 2 (August 11, 2023): 147–56. http://dx.doi.org/10.22314/2618-8287-2023-61-2-147-156.
Full textAbstract:
Among powder surfacing materials with high hardness and resistance to abrasive wear, powders based on WC-TiC-Co systems, which are the basis of hard alloys, are among the most promising. (Research purpose) The research purpose is investigating wear-resistant powder materials for plasma-powder surfacing by electrodispersing solid alloy waste of the T30K4 brand in kerosene. (Materials and methods) We chose substandard carbide plates of the T30K4 brand as the starting material; lighting kerosene as the working fluid. We solved the tasks set in the work on the study of the composition, structure and properties of the obtained carbide powders using modern equipment and complementary methods of physical materials science. Electrodispersion of solid alloy waste was carried out on the original installation; the shape and morphology of the particle surface were studied on an electron-ion scanning microscope with field emission of electrons QUANTA 600 FEG; particle size composition ‒ on a laser particle size analyzer Analysette 22 NanoTec; X-ray spectral microanalysis of particles was carried out on an energy dispersive X-ray analyzer of EDAX company, integrated into a scanning electron microscope QUANTA 200 3D; phase analysis of particles was performed on an X-ray diffractometer Rigaku Ultima IV. (Results and discussion) A new technology for producing a carbide electroerosive powder suitable for plasma-powder surfacing has been developed and investigated, the effectiveness of which is confirmed by the properties of the proposed powder material: the spherical shape of powder particles; the average size of powder particles is 58.4 micrometers; powder particles with a uniform distribution of alloying elements: C, Co, Ti and W; powder particles include phases of carbides WC and TiC. (Conclusions) The conducted studies have shown that it is possible to obtain a wear-resistant powder alloy with a uniform distribution of alloying elements by the method of electroerosive dispersion of solid alloy waste of the T30K4 brand.
27
Sumarno, Edy, Irawati Irawati, and Ria Gazali. "PERENCANAAN INSTALASI LISTRIK GEDUNG WAREHOUSE PT. XYZ SEMARANG JAWA TENGAH." JEIS: JURNAL ELEKTRO DAN INFORMATIKA SWADHARMA 4, no. 1 (January 31, 2024): 17–32. http://dx.doi.org/10.56486/jeis.vol4no1.407.
Full textAbstract:
Warehouse Building PT. XYZ at Semarang Central Java is a building place for keeping logistics owned by the company with a large area. There is also buildings' support in it so that required system installation suitable electricity with applicable standards such as PUIL 2011 and other standards in the field of electricity. The main electricity supply uses a source from PLN, and the generator is set as a backup source when electricity from PLN is dead. Plan installation at PT. XYZ Warehouse building, namely the installation of lighting, socket installation, air conditioning installation, electronics installation, installation of rolling door, installation of local government fire pump, and installation of clean water transfer pump. There are LVMDP panels, SDP panels, and subpanels as supply power for the installation that will be installed. Breaker rating selection power and dimensions cable delivery person who will use will affect on reliability network installation. Calculation of CRC will influence election breaker power, cable diameter selection delivery, and drop the voltage to happen on the network installation. The calculation was conducted manually. With more formerly collected load data equipment electricity at PT. XYZ Semarang and classification distribution system split panel installation, SDP panel, and LVMDP panel. The total load installed on the PT. XYZ Semarang Warehouse building is known as 318,406 VA or 318 kVA so the needed splicing power from PLN using customer of 329 kVA with use transformer with 400 kVA capacity and required generator set capacity of 400 kVA. The load on the LVMDP panel is 254,725 watts with KHA 569 A, so using MCCB with a rating of 630 A, using cable 7 x NYY 1c x 185 mm 2 with drop voltage 7.47 Volts or by 1.96% on the network 3 phase system. By PUIL 2011 standard decline voltage maximum of 4% so that the drop in the voltage on the LVMDP panel is still by the required standard.
28
Santos, Mónica, Armando Almeida, Catarina Lopes, and Tiago Oliveira. "Teletrabalho na perspectiva da Saúde Ocupacional." Revista Portuguesa de Saúde Ocupacional 10 (December 31, 2020): 1–35. http://dx.doi.org/10.31252/rpso.05.09.2020.
Full textAbstract:
Introduction/ background/ objectives The possibility of doing work at home dates back several centuries; however, technological development has allowed for the creation of new jobs based on it and eventually fully executed outside the employer’s premises. In addition, the pandemic situation associated with SARS-COV-2 (COVID-19) has encouraged many institutions to initiate or intensify telework. The purpose of this review was to summarize the most relevant data about the topic, in the context of Occupational Health. Methodology This is a Review, initiated through a survey conducted in April 2020, in the databases “CINALH plus with full text, Medline with full text, Database of Abstracts of Reviews of Effects, Cochrane Central Register of Controlled Trials, Cochrane Database of Systematic Reviews, Cochrane Methodology Register, Nursing and Allied Health Collection: comprehensive, MedicLatina, SCOPUS and RCAAP”. Content Telework is working at home, or at least outside the employer’s conventional facilities, but in a previously stipulated and approved location, using technology. In this review, data on the historical evolution of the work were summarized, highlighting the various Industrial Revolutions. Some national and especially international statistics were also included in the context of Telework. The main sub-types of Telework are also briefly described and what are the desirable characteristics in teleworkers and telemanagers. Finally, the main advantages and disadvantages mentioned in the consulted bibliography are highlighted. Conclusions Generally speaking, the perception of advantages and disadvantages depends on the employee’s characteristics (such as personality, flexibility, autonomy, competence, need for socialization, posture and commitment to work); characteristics of the employer (management, malleability, valorization of human resources, means and procedures); the tasks themselves (ease or not of being teleworked); family characteristics (number of elements, age of children and relational quality); the household (size, lighting, furniture, equipment, area exclusive or not for the Telework); traffic, pollution and urban safety; as well as consequences for the relationship with the company, work and personal life (family and society); that is, the same aspect can be considered both an advantage and a disadvantage, depending on the global context. Furthermore, in reality, Telework has such a diversity of conditions and characteristics, that consensus conclusions are not possible. It is necessary for each institution to analyze the advantages and disadvantages of inserting the Telework and, if it decides to proceed, have a sense of what are the factors that can enhance and compromise the success of the project.
29
"Sta-Rite acquires pool lighting equipment company." Pump Industry Analyst 1997, no. 18 (June 1997): 13. http://dx.doi.org/10.1016/s1359-6128(97)82989-8.
Full text
30
Tanjung, Abrar. "The Penerapan Persyaratan Umum Instalasi Listrik 2011 Pada Instalasi Listrik Bangunan Gedung." Jurnal Pengabdian UntukMu NegeRI 7, no. 1 (May 31, 2023). http://dx.doi.org/10.37859/jpumri.v7i1.4894.
Full textAbstract:
The installation of lighting does not only cover the problem of lighting but includes the installation of equipment (fans, electric motors, water pumps, air conditioners, etc.) PT. Sumatera Riang Lestari is a company engaged in the industrial sector that does not know and understand how to properly install and operate electrical equipment. Based on the results of identifying problems with partners, identifying problems with partners PT. Sumatra Riang Lestari which is being faced by activity partners. In the operation of electrical installation equipment, it often experiences damage, for example there is a voltage drop, damage to equipment occurs and power outages occur. The results of the discussion partners know and master Basic Knowledge of Electrical Installation after socialization 92%, General Requirements for Electrical Installation (PUIL) 2011 by 88%, Electricity Standardization (SNI) by 96%, Use and Operation of Electrical Equipment according to Electricity Standards (SNI) according to Electricity Standards (SNI) of 88%, Electrical Installation Materials and Components of 96%
31
Solansa, Ahmad Faqih, Hendra Nanang, and M. Sudiyamto. "EVALUATION OF OCCUPATIONAL SAFETY AND HEALTH IN PT PANTJA SIMPATI." KREATOR 4, no. 1 (July 31, 2021). http://dx.doi.org/10.46961/kreator.v4i1.309.
Full textAbstract:
Every production process in a company is inseparable from all the dangers of disease and occupational accidents for workers. So in a company it is necessary to implement occupational safety and health in order to reduce and prevent occupational diseases and accidents. In carrying out occupational safety and health at PT Pantja Simpati, PT Pantja Simpati has several problems that can cause illness and work accidents such as unavailability of personal protective equipment, non-functioning air vents, employees smoking in the production room, employees drinking in the production section. part. areas, fire fighting equipment lacks lighting, damaged ceilings or roofs, untidy cables, and slippery production floors. Ways to avoid work accidents such as providing PPE and APAR, repairing damaged equipment, and taking firm action against workers. From the problems found, the implementation of occupational safety and health at PT Pantja Simpati is still not good.Keywords— Occupational Safety and Health, 5W+1H
32
Nava-Morales, Francisca, Rodrigo Alva-Gallegos, Francisco Ángel Flores-Galván, and Carlos Gustavo Baltazar-Plata. "Industrial safety and health actions for business growth in a metalworking industry." ECORFAN Journal Republic of El Salvador, June 30, 2019, 23–31. http://dx.doi.org/10.35429/ejrs.2019.8.5.23.31.
Full textAbstract:
Objectives. Improve the working conditions and productivity index through the implementation of Industrial Safety and Hygiene and Plant Distribution actions in a pressure foundry company. Methodology. 1. Analysis of the manufacturing process of aluminum and zamak parts. 2. To identify the risk elements those do not allow to work in a safe and a right way. 3. To assign safety equipment according to the risks of the area and the integration of a Joint Commission on Safety and Industrial Hygiene. 4. To identify the containers for waste management in the different phases of the process. 5. To re-distribute the lay out to improve ventilation and lighting of the areas. 6. To analyze the results, considering the impact on the improvement of the company's productivity. Contribution. Ensure the safety of its employees, achieve a better work environment, comply with established regulations and improve productivity in the company.
33
Natanael, Joseph. "Potential carbon emissions reduction from warehousing activity using vegetation projection planting." Applied Environmental Science 1, no. 2 (January 31, 2024). http://dx.doi.org/10.61511/aes.v1i1.2024.285.
Full textAbstract:
Large energy consumption and environmental impact from logistical operations which majorly caused by the lighting, heating, cooling, and air conditioning systems alongside fixed and moving material handling equipment are now a major contributor to GHG (Greenhouse Gases). This research objective is to calculate the potential carbon emissions reduction by implementing vegetation projection planting on the company and alternative energy implementation. The method used in this study is by recording and calculating data from the company operational which then convert into data activity. The results from this study stated that company operational contribute 6,588,252.19 KgCO2/month. The existing vegetation capable to absorb 3,810 KgCO2/month, meanwhile the potential carbon emissions reduction which come from planting projection and alternative energy implementation is 6,928,718.7 KgCO2/month. With the increasing of environmental impact from logistical operations, it is necessary to conduct environmental assessment regarding the company business process. Calculating GHG emissions in form of carbon emissions can be the first step to conduct the assessment. Utilization of available green open space area and alternative energy implementation is some potential method to direct or indirectly reduce carbon emissions from warehousing operations.
34
"Multi-input portable power station design using lithium-ion battery." ARPN Journal of Engineering and Applied Sciences, August 13, 2023, 1225–33. http://dx.doi.org/10.59018/0623159.
Full textAbstract:
A portable power station is a power station that can be easily transported to meet the electricity needs of outbound activities, night-time fishing, merchants at night markets, and refugee tents. When natural disasters such as earthquakes, landslides, tsunamis, and floods occur, the electricity network and communication networks are disrupted, despite the urgent need for electricity to supply basic things at the disaster site, such as lighting, charging cellphones, and providing other electronic equipment. This study designed and implemented a portable power station using lithium-ion batteries as a source of electrical energy, with solar modules and the State Electricity Company (PLN) power grid for recharging the batteries. The research method is experimental quantitative, and the power station is intended to generate 300 Wh of electrical energy. Tests performed include: 1) The charging process uses a 1 x 50 Wp solar module and the PLN electricity network; 2). The process of discharging involves a 50-Watt ac-led lamp and a 4.000-mAh smartphone. As a result, the portable power station can function effectively, can provide electrical energy for one 50-watt ac-led lamp for t = 6.27 hours, and can recharge a smartphone six times. While the process of recharging using a solar module took t = 8 hours, it took t = 4 hours when using the State Electricity Company (PLN) power grid.
35
Istiqomah, Meita Selina, and Indi Djastuti. "Study of Green Human Resource Management Implementation on Employees of PT. Telkom Indonesia Tbk." Eduvest - Journal Of Universal Studies 2, no. 6 (June 20, 2022). http://dx.doi.org/10.36418/edv.v2i6.466.
Full textAbstract:
The occurrence of global warming and climate change has caused a commotion around the world, applying the principle of going green is not something that only has to be done in the personal environment but must be done anywhere including in the work environment. Currently, the company provides many opportunities for employees to implement go green behavior. From customizing the office lighting system to the type of office equipment they will choose and use, at least there are many things they can do to make the office environment more environmentally friendly. The idea of introducing a go green initiative into the workplace can seem a little difficult at first. While it can be difficult trying to figure out where to start, there are actually many ways that companies can be more environmentally friendly in the office environment without major cost implications with long term benefits for both the company and employees. The application of environmentally friendly behavior in human resource management is also called Green Human Resources Management (GHRM). This study examines a state-owned enterprise (BUMN) engaged in the information and communication technology (ICT) service industry, namely PT Telkom Indonesia TBK. This research focuses on the types of GHRM practices implemented in the company environment, the factors that encourage companies to implement GHRM practices, employee understanding of these practices between generations such as baby boomers, gen x, and gen y, efforts and socialization of the company so that GHRM practices continue. The results found in this study that there have been several GHRM practices that have been carried out but for the understanding of the term GHRM it is not understood by the baby boomers generation. Employees in this generation are more familiar with the term go green.
36
M, Lotfi Foroushani, Salimi M, Mostahfezian M, and Soltan Hosseini M. "The physical activity development model of Mobarake steel company employees." Occupational Medicine, August 11, 2023. http://dx.doi.org/10.18502/tkj.v15i2.13379.
Full textAbstract:
Introduction: Human capital is one of the most important resources of an organization, and as a result, organizations strive to increase their productivity. Since employees' health contributes to it, this study aimed to determine the physical activity development model of Mobarake Steel Company employees.
Materials and Methods: The current research is descriptive-analytical. It is a kind of exploratory and applied research that helps to solve the problem in Mobarake Steel Company of Isfahan. The statistical population in this research in the qualitative part includes all specialists, managers, and experts of Mobarake Steel Company as well as knowledgeable academic staff members who have expertise or experience in the field of human resources policy and sports management. Also, in the quantitative part, all the employees of Foulad Mobarakeh formed the statistical population of the research. The research tools in the qualitative and quantitative part were made by the researcher and based on the components extracted from the library studies and the results from the interviews, respectively. The research method in the qualitative part was Glazer's approach data model and in the quantitative part confirmatory factor analysis. The validity of the formal method and reliability was also confirmed through retesting. Data analysis was done using SPSS version 26 and SmartPLS software.
Results: Evaluation of the obtained model using model fit indices has shown that the model was suitable (SRMR, 0.186, Chi-square, 341.256, and NFI, 0.087). Also, the final dimensions of the model include the psychosocial environment with the dimensions of promoting sports and physical activity and encouragement and support, the physical environment with the dimensions of providing infrastructure and active company, health resources with the dimensions of program alignment and evaluation and monitoring and company participation with the dimensions of management and Planning was achieved.
Conclusion: Considering the comprehensive health program, considering the calendar and regular sports program, creating culture and forming a sports team with a dynamic environment, monitoring related instructions, forcing employees to evaluate physical health and monitoring the progress of physical activity development programs, managers' support, per capita allocation Appropriate exercise and ergonomics of control rooms and related equipment such as chairs and computers and things such as the level of lighting and even per capita dedicated space for employees and encouraging employees can be the results of the implementation of this research model.
37
Shchekachykhina, Kateryna Andriivna, and Pavlo Vasylovych Popovych. "Application of Network Technologies in Low-Budget Television Production." Microsystems, Electronics and Acoustics 27, no. 3 (December 26, 2022). http://dx.doi.org/10.20535/2523-4455.mea.268974.
Full textAbstract:
The article considers the classical scheme of the broadcast news studio and the principle of operation of the television broadcasting system on the example of the standard of the international digital television system, which is the reference model of terrestrial digital television transmission. The structural scheme of the broadcast news studio is given, the functions of each block of the studio and the principle of their work are described. The diagram of the digital television system shows how the signal from the studio passes through the stages of encoding and modulation to the broadcasting antenna, and then the demodulated and decoded TV signal appears in the digital television application on the viewer's side. The interactive communication channel is also discussed in more detail. The diagram of the interactive communication channel presented in this article shows how the communication between the broadcasting company and the viewer of digital television takes place. However, given the current tendency of TV channels to move from broadcasting on digital television to online broadcasting on streaming platforms, the article considers an example of organizing an online broadcast on the YouTube platform. Using the example of equipment from the classical scheme of the broadcast studio, the selection of similar low-budget equipment for organizing a studio for online broadcasts was carried out. The list of low-budget equipment includes a video mixer, video cameras, lighting equipment and two types of microphones. The advantages and disadvantages of low-budget equipment are indicated, from which it can be concluded that low-budget equipment is not of poor quality, but is designed for a smaller number of connected equipment, so it is suitable for use in small television studios. The functions and possibilities of using the selected Blackmagic ATEM Mini Pro video mixer are considered. A scheme for organizing a live broadcast on the YouTube streaming platform using the selected equipment is presented. The low budget of the studio is substantiated by estimates and comparison with the budget of a similar educational television studio. The possibilities of remote access organizing to the workplace via VPN (Virtual Private Network) and RDC (Remote Desktop Connection) are also considered. These features allow employees to work from a remote location, not directly in the studio. The purpose of the article was to determine how does remote access delay the work of the studio and complicate the process of launching online broadcasts. Measurements of connection delay and broadcasting were carried out. According to the results of the measurements, it was concluded that both VPN and RDC insignificantly affects the connection speed of the equipment, so remote work can be equally comfortable as working directly in the studio. The difference between remote work and direct work in the studio consists of in the preliminary configuration of devices for remote connection and also remote work depends on the Internet connection entirely and light availability in the studio.
38
Purwantara, Julius Frandy, and Dedy Sushandoyo. "Proposed Knowledge Management System for the Time Efficient in R&D Department of PT Automotive Lumina." International Journal of Current Science Research and Review 07, no. 01 (January 31, 2024). http://dx.doi.org/10.47191/ijcsrr/v7-i1-80.
Full textAbstract:
The automotive industry has grown post-Covid 19, positively impacting related sectors like car lighting. Due to high demand, PT Automotive Lumina, a lamp manufacturer specializing in OEM car lights, needs better time management. Responding to RFQs for new car models poses significant challenges due to delays caused by dependence on Juoku Technology. To tackle this, the company initiated an independent R&D process, but the need for more effective knowledge management worsens the situation, affecting competitiveness in a rapidly changing market. This research addresses two key questions: What Knowledge Management system can be proposed for time efficiency in the R&D Department of PT Automotive Lumina? and How to implement the suggested Knowledge Management system for time efficiency in the R&D Department of PT Automotive Lumina? Qualitative research methods were employed to study these questions, including interviews with key stakeholders. Analysis revealed eight sub-causes contributing to the observed problems, including a lack of skilled personnel, ineffective knowledge management, reliance on Juoku’s R&D schedule, rapid technological advancements, inefficient processes, limited decision-making authority, limited testing equipment in the R&D department, and most importantly, the absence of a knowledge management system. Several solutions to these challenges are presented based on the SECI, PPT framework, and Core, Advanced, and Innovative knowledge framework. Direct training, knowledge capture, and collaboration tools are among the planned knowledge management programs at PT Automotive Lumina. Preparation procedures were conducted in November and December 2023, with the proposed solution implementation set to begin in February 2024. Following deployment, knowledge management activities will be evaluated, and necessary modifications will be made for future improvements. PT Automotive Lumina aims to enhance time efficiency and support independent R&D through improved knowledge management procedures.
39
Bostanova, S., D. Aitmukhanbetov, K. Bayazitova, D. Zhantleuov, and Y. Il. "Indicators of full value feeding rations for dairy cows." Brazilian Journal of Biology 82 (2022). http://dx.doi.org/10.1590/1519-6984.254111.
Full textAbstract:
Abstract This article presents the results of the level of feeding and the health status of dairy cows in a commercial dairy farm on the content of the main components in milk (fat, protein, urea). The aim of the research was to study the milk productivity and composition of milk of cows, to analyze the level of feeding and the content of basic nutrients in the diet of the farm. The farm breeds purebred Holstein cattle with a high genetic potential for productivity. The milking herd was formed in 2009 on the basis of 600 heads of Holstein-Friesian heifers imported from Hungary, as well as 65 heads of Holsteinized heifers of Ukrainian selection from Ukraine in 2015. Today the livestock numbers about 1,500 head of cattle, of which there are about 900 breeders. On the territory of the farm there are: 3 cowsheds for keeping cows, an insemination room, a milking parlor with a parallel installation of the Delaval company, in which 48 cows are milked for one milking, the ABK, where the manager's office, livestock technician, accounting is located, and a mini-hotel with dining room and lounges. Dairy bases are equipped with auto-drinkers, ventilation, plumbing, electric lighting, manure removal mechanisms, and a milking installation. The object of the research was Holstein cows in the amount of 483 heads of Aina Dairy Farm LLP. The studies were carried out according to generally accepted zootechnical methods using modern equipment for conducting analyzes and interstate and state standards. The research results showed that the milk productivity of cows averaged 19.5 kg per day, the fat content 4.3%, the protein 3.9%, the number of somatic cells 230.5 thousand units / ml, urea 45.3 mg / 100 ml respectively. Analyzing the level of urea in milk can suggest a high crude protein content in the diet. The ration of feeding dairy cows on the farm is concentrate-silage-haylage and there is an excess of dry matter by 16.2%, crude protein by 9.8%, starch by 29.4%, respectively.
40
KUDRYASHEV, GENNADIY, and ALEKSANDR TRETYAKOV. "PRESENTATION OF THE SURVEYS OF ELECTRICITY METERS IN THE DISTRIBUTION GRIDS OF RURAL CONSUMERS." Elektrotekhnologii i elektrooborudovanie v APK 3 (2022). http://dx.doi.org/10.22314/2658-4859-2022-69-3-9-13.
Full textAbstract:
The most common electric loads at enterprises, including agricultural ones, are electric motors and lighting installations. In addition, electrothermal installations and semiconductor converters of alternating current into direct current are also used. Electric motors are usually three-phase, they create higher harmonics and voltage fluctuations at the start-up. (Research purpose) The research purpose is evaluating the possibility of using data of voltage non-sinusoidality obtained from metering devices for monitoring and managing for power losses, and the reliability of electrical equipment in distribution grids. (Materials and methods) The measuring complex «Resource-UF2M», which allows the measurement and registration of electricity parameters established by GOST 32144-2013, was used to carry out the measurements. (Results and discussion) The issue of the influence of non-sinusoidal voltage on long grids of 0.4 kilovolts in Russia is relevant. In many industrially developed countries, the network is affected by powerful nonlinear loads that distort the shape of current and voltage curves in electrical grids; the connection of such loads is allowed only in compliance with the requirements for ensuring the quality of electrical energy, for this purpose appropriate corrective devices are used. At the same time, the total capacity of the newly introduced nonlinear load should not exceed 3-5 percent of the capacity of the entire power company. The opposite picture is observed in the Russian Federation, where such consumers are connected rather randomly. The issuance of technical requirements for connection in most cases has a formal character due to the lack of standard methods and mass certified devices; the rejection of filter-compensating, symmetrical, multifunctional optimizing devices leads to a deterioration in the quality of electrical energy. (Conclusions) When the power of non-linear consumers is exceeded, various problems in operation and consequences should be expected, the causes of which are not obvious. In low-voltage distribution grids supplying rural consumers with a non-linear load share of more than 25 percent, individual problems can manifest themselves immediately.