Relevant bibliographies by topics / Tile-Based interface

Academic literature on the topic 'Tile-Based interface'

Author: Grafiati
Published: 8 June 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tile-Based interface.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Conference papers

Journal articles on the topic "Tile-Based interface":

1

Nasution, Salhazan, Arbi Haza Nasution, and Arif Lukman Hakim. "Pembuatan Plugin Tile-Based Game Pada Unity 3D." IT JOURNAL RESEARCH AND DEVELOPMENT 4, no. 1 (August 15, 2019): 46–60. http://dx.doi.org/10.25299/itjrd.2019.vol4(1).3517.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Saat ini video games sudah menjadi hal umum dalam kehidupan masyarakat dunia. Sejalan dengan itu, proses pengembangan sebuah game menjadi lebih baik dengan kemunculan game engine. Salah satu dari sekian banyak game engine yang paling sering digunakan adalah Unity. Unity memberikan berbagai macam fitur, salah satunya adalah kemampuan untuk menggunakan plugin. Hanya saja, Unity sendiri belum memiliki plugin untuk pengembangan game berbasis tile. Tanpa dukungan plugin, pengembangan tile-based game akan memakan waktu sangat lama, karena setiap tile harus diatur ulang masing-masing posisinya pada koordinat x, y, dan z dengan sangat presisi setiap kali tile baru dibuat. Solusi dari masalah tersebut adalah dengan membuat GUI (Graphical User Interface) pada editor Unity, dengan melakukan ekstensi kelas Editor milik Unity. Dengan melakukan ekstensi kelas tersebut, sebuah sistem menu baru dapat dibuat khusus untuk melakukan level editing pada tile-based game. Dengan menggunakan plugin ini, pengembangan tile-based game dapat menjadi lebih efektif dan efisien, baik dari segi sumber daya, waktu, dan kemudahan pengerjaan.
2

Gololo, M. G. D., F. Carrió Argos, and B. Mellado. "Tile Computer-on-Module for the ATLAS Tile Calorimeter Phase-II upgrades." Journal of Instrumentation 17, no. 06 (June 1, 2022): P06020. http://dx.doi.org/10.1088/1748-0221/17/06/p06020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Abstract The Tile PreProcessor (TilePPr) is the core element of the Tile Calorimeter (TileCal) off-detector electronics for High-luminosity Large Hadron Collider (HL-LHC). The TilePPr comprises FPGA-based boards to operate and read out the TileCal on-detector electronics. The Tile Computer on Module (TileCoM) mezzanine is embedded within TilePPr to carry out three main functionalities. These include remote configuration of on-detector electronics and TilePPr FPGAs, interface the TilePPr with the ATLAS Trigger and Data Acquisition (TDAQ) system, and interfacing the TilePPr with the ATLAS Detector Control System (DCS) by providing monitoring data. The TileCoM is a 10-layer board with a Zynq UltraScale+ ZU2CG for processing data, interface components to integrate with TilePPr and the power supply to be connected to the Advanced Telecommunication Computing Architecture carrier. A CentOS embedded Linux is deployed on the TileCoM to implement the required functionalities for the HL-LHC. In this paper we present the hardware and firmware developments of the TileCoM system in terms of remote programming, interface with ATLAS TDAQ system and DCS system.
3

Vignes, Jérémie, Fabrice Schmidt, Gilles Dusserre, Olivier de Almeida, and Jean Frédéric Dalmasso. "Numerical Simulations of Clay Tiles Compression." Key Engineering Materials 504-506 (February 2012): 1403–8. http://dx.doi.org/10.4028/www.scientific.net/kem.504-506.1403.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
During the pressing step, the clay tiles undergo stresses which result in the appearance of defects. A rheological study, based on free compression tests, allowed to confirm the Elasto-visco-plastic behaviour of the clay. The different constitutive parameters were estimated by fitting the force-displacement experimental curves using the optimisation algorithm (ES Metamodel) implanted in the commercial software Forge 2009®. The influence of the tribological parameters was studied using squeezing numerical simulations of a full tile. The numerical model was validated with experimental squeezing test of technological specimen with a tile lug. Then, we have compared experimental force with the numerical one and deduced that the clay/tool interface is not perfectly sliding. A friction Tresca’s law was used to model the clay/tool interface. Numerical results showed that the actual geometry of tile lug didn’t allow to form correctly the tile. Several areas undergo tensile stress, air traps ,... A new geometry of tile lug was proposed in order to limit this phenomenon. Using a simplified defect criteria (Latham and Cockroft), the numerical model allowed to locate the areas where there is a risk of crack.
4

Llorens, Joan, Miquel Àngel Chamorro, Joan Fontàs, Manuel Alcalà, Marc Delgado-Aguilar, Fernando Julián, and Miquel Llorens. "Experimental Behavior of Thin-Tile Masonry under Uniaxial Compression. Multi-Leaf Case Study." Materials 14, no. 11 (May 24, 2021): 2785. http://dx.doi.org/10.3390/ma14112785.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
In this study, experimental analysis on the compressive strength of multi-leaf thin-tile masonry is presented. A compressive strength test was carried out on thin-tile, mortar and 48 specimens with two- and three-leaf thin-tile masonry. The results obtained were compared with literature on brick masonry loaded parallel to a bed joint. Based on the results of this study, the failure mode presented the first crack in the vertical interface; this crack grew until the leaf was detached. From this point until collapse, lateral buckling of the leaves was generally observed. Therefore, the detachment compressive strength value was considered relevant. Up to this point, both masonries exhibit similar stress–strain behavior. The experimental values of the detachment compressive strength were compared with the values calculated from the equation generally used in the literature to evaluate the compressive strength of brick masonry. From the results obtained, the following conclusion can be drawn: This equation is only suitable for tree-leaf thin-tile masonry but with more relevant influence on the compressive strength of the mortar. This study concluded that only three-leaf specimens behave similarly to brick masonry loaded parallel to a bed joint. Finally, whether the failure mode was due to shear or tensile stresses in the vertical thin-tile-mortar interface cannot be identified.
5

Zhang, Ji Xiu, Ye Zhang, Ji Kang Liu, Yuan Chao Miao, and Sai Hong Duan. "Research on the Properties of High-strength Gypsum Based Tile Adhesive in Interior Decoration." E3S Web of Conferences 165 (2020): 05015. http://dx.doi.org/10.1051/e3sconf/202016505015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
In this paper, a new early strength tile adhesive is prepared by using α- high strength gypsum and its properties are discussed. The research methods refer to relevant Chinese standards. The results show that the tensile bond strength of the adhesive can reach 0.6 MPa in one day and 1.5 MPa in 7 days, which is close to 80% of 28-day strength. It is indicating that the adhesive has high bond strength, rapid strength development, and high dimensional stability. It effectively solves the problems that the traditional cement-based tile adhesive is prone to hollowing, falling off, and cracking. Additionally, no interface treatment is required during the using process of this gypsum-based adhesive.
6

Wu, Chaoxi, Xiaoying Wang, Jianjing Wang, Zhen Zhang, Zhiping Wang, Yifei Wang, and Shunqing Tang. "Tile-based self-assembly of a triple-helical polysaccharide into cell wall-like mesoporous nanocapsules." Nanoscale 9, no. 28 (2017): 9938–45. http://dx.doi.org/10.1039/c7nr02801f.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Herein, we report that β-glucan, after modified by two types of acyl groups, can self-assemble into tiles at the interface of two solvents. These tiles can further pack into mesoporous nanocapsules in a stepwise manner.
7

Wang, Qi, Yiming Ouyang, Zhengfeng Huang, and Huaguo Liang. "Workload-Aware WiNoC Design with Intelligent Reconfigurable Wireless Interface." Security and Communication Networks 2023 (May 9, 2023): 1–14. http://dx.doi.org/10.1155/2023/9519044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
By introducing wireless interfaces in conventional wired routers or hubs, wireless network-on-chip (WiNoC) is proposed to relieve congestion pressure from high volume inter-subnet data transmission. Generally, processing elements on chip receive input data and return feedback through network interface, and data transmission function in Network-on-Chip (NoC) is completed by routers. Hubs equipped with wireless interface are fixed to certain wired routers. While wireless channels may not be fully utilized due to unbalanced workload and constant hub-router connection, e.g., certain nodes processing excess inter-subnet data traffic are far away from hubs. In this paper, we proposed a workload-aware WiNoC design with intelligent reconfigurable wireless interface to improve wireless resources utilization and mitigate congestion. Through multidimensional analysis of traffic flow, a 4-layer neural network is trained offline and applied to analyze workload in each tile, and return three most potential tiles for wireless interface reconfiguration to fully utilize wireless channel and lowing latency. We also implement a historical traffic information-based reconfigurable scheme for comparation. Evaluation results show that in an 8 × 8 hybrid mesh topology, the proposed scheme can achieve 10%–16% reduction in network latency and 5%–11% increment in network throughput compared with fixed-link hub-node connection scheme under several mixed traffic patterns.
8

Neubauer, Jörg, and Jenny Lebert. "The influence of hydroxyalkyl methylcellulose on early skin formation in cement‐based tile adhesive." ce/papers 6, no. 6 (December 2023): 1660–65. http://dx.doi.org/10.1002/cepa.2984.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
AbstractThe effect of cellulose ethers (CE) with same water retention (WR) level but different molecular weight on the early skin formation of cement adhesive mortars was studied. In drymix mortars CE provide WR higher molecular weight and dosage of CE both improve WR. In this study all CE concentrations were adjusted to provide same WR independently from molecular weight of CE. Adjusted concentrations were obtained from zero‐shear viscosities measured in aqueous CE solutions.Measurements with cement‐based mortars identified the interstitial pore solution viscosity to determine WR level. Data show comparable WR for equal interstitial pore solutions, independently from the molecular weight of the CE if its concentration was adjusted accordingly. However, for cement adhesive mortars formulated with CE having different molecular weight which all provide equal WR, early skin formation was found to vary notably. Higher dosed low molecular weight CE outperforms CE with lower dosage but high molecular weight. This effect can be explained through the formation of a CE containing layer upon evaporation of water from the water‐air interface of the mortar.
9

Xu, Qi, Longgang Xiang, Haocheng Wang, Xuefeng Guan, and Huayi Wu. "GeoMapViz: a framework for distributed management and geospatial data visualization based on massive spatiotemporal data streams." IOP Conference Series: Earth and Environmental Science 1004, no. 1 (March 1, 2022): 012017. http://dx.doi.org/10.1088/1755-1315/1004/1/012017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Abstract Spatiotemporal big data have multisource, heterogeneous, high-dimensional and spatiotemporal associations. Due to the limited computing and network resources, while the spatiotemporal data to be rendered are large and dynamic, efficient visual analysis has always been a popular topic and has had difficulty in the research of spatiotemporal big data. As one of the important means of big data visualization, thermal maps play an important role in expressing data flow, information flow, and trajectory flow. At the same time, the development of a distributed computing framework also provides technical support for the online calculation and visualization of spatiotemporal data streams. In response to the above problems, this paper designs and implements GeoMapViz, a distributed management based on massive spatiotemporal data streams and a multiscale geographic spatial visualization framework, which is oriented by the expression of thermal maps of massive point datasets. First, based on the concept of the tile pyramid model and spatiotemporal cube, we propose a thermal map sequential tile pyramid (TS_Tile) model, which realizes scalable storage and efficient retrieval of data flow. GeoMapViz adopts a high-performance Flink stream computing cluster to implement the large-scale parallel construction of hierarchical tile pyramids, implements distributed storage and index construction of data based on HBase and Geomesa, and uses Geoserver to manage the map service to provide a spatiotemporal range query interface. Finally, through using an open dataset as a system simulation test, the results show that the TS_Tile model can effectively organize large-scale, time-space and multidimensional thermal map data, and the query and visualization of the heatmap can reach a subsecond response. Furthermore, GeoMapViz supports the integration of the thermal map and original flow and provides a feasible solution for the visual analysis of large-scale spatiotemporal data.
10

do Nascimento, Otávio Luiz, Alexandra Ancelmo Piscitelli Mansur, and Herman Sander Mansur. "“Cement-Free Product” for Settlement of Ceramic Tiles: An Approach for Greener Construction." Materials Science Forum 805 (September 2014): 403–8. http://dx.doi.org/10.4028/www.scientific.net/msf.805.403.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Increased public awareness of the threats posed by global warming has led to greater concern over the impact of anthropogenic carbon emissions on the global climate associated with the level of carbon dioxide (CO2) in the atmosphere. Hence, without radical market, technological, and cultural changes, the CO2 concentrations are expected to rise to unbearable levels within just few decades ahead. The production of cement is estimated to be responsible for approximately 5% of the global carbon dioxide emissions. Consequently, aiming for creating a more sustainable world, engineers and scientists must develop and put into use greener building materials that may revolutionize the entire construction industry. This study presents an innovative product for settlement of ceramic tiles as a potential alternative for replacing the conventional cement based mortar in some specific building applications. Essentially, the novel system is based on a double face polymer-adhesive sheet (“cement-free product”). Thus, the main goal was to evaluate the performance and estimate the durability of the developed system. Pull-off tests were conducted in order to compare this new system to the traditional one, with polymer modified mortar, under different procedures and conditions of cure. In addition, both systems were modeled using Finite Element Method (FEM) to obtain the stresses at the interface between ceramic-tile and adhesive. Based on the results, the recommended limits of bond strength for the innovative “cement-free product” of ceramic tile installation could be lower than those specifications used for the equivalent mortar systems. Therefore, these results give some preliminary evidence that by using the new “cement-free” product for ceramic-tile installation may lead to some increase in the productivity and, more important, in the sustainability of a relevant sector of the construction industry.
More sources
You might also be interested in the extended bibliographies on the topic 'Tile-Based interface' for particular source types:
Journal articles

Dissertations / Theses on the topic "Tile-Based interface":

1

Kadri, Ilyes. "Nouvelle famille de placement en deux dimensions pour la visualisation des menus sur un écran." Electronic Thesis or Diss., Université de Lorraine, 2023. http://www.theses.fr/2023LORR0177.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Les interfaces basées sur des tuiles sont apparues pour la première fois sous Windows 8. Ce type d'interface consiste en un pavage de l'espace d'affichage en utilisant des entités rectangulaires remplaçant les icônes pour lancer les programmes. Le principal avantage de ce type d'interface est que chaque tuile assimilable à un menu peut contenir différents types d'informations (texte, graphiques, vidéo, etc.). Classiquement, la taille des tuiles et leur emplacement sont définis par l'utilisateur. Dans le cadre de cette thèse, nous souhaitons offrir la possibilité de générer des interfaces de ce type de manière dynamique et en fonction de différents contextes. Ce problème englobe des questions importantes d'Interaction Homme-Machine (IHM) et d'Optimisation Combinatoire (OC). En effet, la version standard de ces menus avec des rectangles à dimensions fixes (The two-dimensional bin-packing) appartient déjà à la classe des problèmes NP-difficiles. D'un autre côté, le sujet comporte des aspects IHM importants, notamment la prise en compte de contextes variables plus ou moins dépendants de l'utilisateur, la simulation et mise en œuvre des algorithmes conçus sur des interfaces réelles, et enfin la validation par des tests utilisateurs de la visualisation produite en situation d'interactions
Tile-based interfaces appeared for the first time on Windows 8. This type of interface consists of a tiling of the display space using rectangular entities replacing the icons to launch the programs. The main advantage of this interface is that each tile matching to a menu can contain several types of information (text, graphics, video, etc.). In the current use of these interfaces, the size of the tiles and their placement are currently set by the user. In this research work, we would like to offer the possibility to generate this interface in a dynamic way and according to various contexts. This problem encompasses important issues of Human-Computer Interaction (HCI) and Combinatorial Optimization (CO). Indeed, the standard version of these menus with fixed-dimensional rectangles (The two-dimensional bin-packing) already belongs to the class of NP-difficult problems. On the other hand, the subject includes important HCI aspects, in particular the taking into account of variable contexts more or less dependent on the user, the simulation and implementation of the algorithms designed on real interfaces, and finally the validation by user tests of the generated interfaces during interaction

Conference papers on the topic "Tile-Based interface":

1

Dong, Weiming, Ning Zhou, and Jean-Claude Paul. "Optimized tile-based texture synthesis." In Graphics Interface 2007. New York, New York, USA: ACM Press, 2007. http://dx.doi.org/10.1145/1268517.1268558.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Choi, Won Seok, Sang Ju Lee, Jong Oh Kim, and Seong Gon Choi. "Multicore Packet Distribution Method Using Multicore Network Interface Card Based on Tile-gx72 Network Processor." In 2024 26th International Conference on Advanced Communications Technology (ICACT). IEEE, 2024. http://dx.doi.org/10.23919/icact60172.2024.10471931.

Full text
APA, Harvard, Vancouver, ISO, and other styles

To the bibliography