Academic literature on the topic 'Thermo-upgrading'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Thermo-upgrading.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Thermo-upgrading"
Schmitt, Nina, Andreas Apfelbacher, Nils Jäger, Robert Daschner, Fabian Stenzel, and Andreas Hornung. "Thermo‐chemical conversion of biomass and upgrading to biofuel: The Thermo‐Catalytic Reforming process – A review." Biofuels, Bioproducts and Biorefining 13, no. 3 (February 25, 2019): 822–37. http://dx.doi.org/10.1002/bbb.1980.
Full textMuley, P. D., C. E. Henkel, G. Aguilar, K. T. Klasson, and D. Boldor. "Ex situ thermo-catalytic upgrading of biomass pyrolysis vapors using a traveling wave microwave reactor." Applied Energy 183 (December 2016): 995–1004. http://dx.doi.org/10.1016/j.apenergy.2016.09.047.
Full textDuan, Peigao, Bing Wang, and Yuping Xu. "Catalytic hydrothermal upgrading of crude bio-oils produced from different thermo-chemical conversion routes of microalgae." Bioresource Technology 186 (June 2015): 58–66. http://dx.doi.org/10.1016/j.biortech.2015.03.050.
Full textChoi, Dongho, Sungyup Jung, Dong-Jun Lee, Hana Kim, Yiu Fai Tsang, and Eilhann E. Kwon. "A new upgrading platform for livestock lignocellulosic waste into syngas using CO2-assisted thermo-chemical process." Energy Conversion and Management 236 (May 2021): 114084. http://dx.doi.org/10.1016/j.enconman.2021.114084.
Full textXiao, Qiao, Changlin Cao, Liren Xiao, Longshan Bai, Huibin Cheng, Dandan Lei, Xiaoli Sun, et al. "Selective Decomposition of Waste Rubber from the Shoe Industry by the Combination of Thermal Process and Mechanical Grinding." Polymers 14, no. 5 (March 7, 2022): 1057. http://dx.doi.org/10.3390/polym14051057.
Full textHunt, John A., Frank E. Dickerson, A. Abbott, Gabriel Szantai, and Paul E. Mooney. "UHV ENFINA - A New High-Performance EELS Spectrometer for the VG STEM." Microscopy and Microanalysis 7, S2 (August 2001): 1132–33. http://dx.doi.org/10.1017/s1431927600031731.
Full textKurpe, Oleksandr H., Volodymyr V. Kukhar, Eduard S. Klimov, and Andriy H. Prysiazhnyi. "Thermomechanical Controlled Rolling of Hot Coils of Steel Grade S355MC at the Wide-Strip Rolling Mill 1700." Solid State Phenomena 291 (May 2019): 63–71. http://dx.doi.org/10.4028/www.scientific.net/ssp.291.63.
Full textRigail-Cedeño, Andres F., Antonio Diaz-Barrios, Juan Gallardo-Bastidas, Stefania Ullaguari-Loor, and Nicolás Morales-Fuentes. "Recycled HDPE/PET Clay Nanocomposites." Key Engineering Materials 821 (September 2019): 67–73. http://dx.doi.org/10.4028/www.scientific.net/kem.821.67.
Full textPozza, Luca, Anna Degli Esposti, Alessandra Bonoli, Diego Talledo, Luca Barbaresi, Giovanni Semprini, and Marco Savoia. "Multidisciplinary Performance Assessment of an Eco-Sustainable RC-Framed Skin for the Integrated Upgrading of Existing Buildings." Sustainability 13, no. 16 (August 17, 2021): 9225. http://dx.doi.org/10.3390/su13169225.
Full textMendecka, Barbara, Giovanni Di Ilio, and Lidia Lombardi. "Thermo-Fluid Dynamic and Kinetic Modeling of Hydrothermal Carbonization of Olive Pomace in a Batch Reactor." Energies 13, no. 16 (August 11, 2020): 4142. http://dx.doi.org/10.3390/en13164142.
Full textDissertations / Theses on the topic "Thermo-upgrading"
Noubli, Halima. "Développement d’un nouveau thermo-transformateur à absorption-démixtion : optimisation conjointe du cycle et du mélange de travail." Thesis, Vandoeuvre-les-Nancy, INPL, 2010. http://www.theses.fr/2010INPL089N/document.
Full textThis work is a study of a new type of Absorption-Demixing Heat Transformer (ADHT), using a mixture exhibiting a miscibility gap at low temperature. In this cycle, the separation step is performed by settling obtained after cooling the mixture. The separation is then energetically free and enables to reach thermal yields higher than those obtained for classical absorption heat transformers where separation is done by distillation.In order to find suitable working mixtures to reach temperature lift of 50°C, a numerical simulation tool was developed to calculate ADHT performances. This tool enabled to calculate thermal yield and thermal lift for different values of operating parameters (molar feed ratio, number of stages of rectification column) and different properties of working mixtures (Cp, Lv, parameters characterizing liquid-liquid and liquid-vapour equilibria). The best operating conditions allowed reaching a 12,4°C thermal lift for the n-heptane / DMF mixture takes as a reference mixture. By varying the mixture properties around the values of the reference mixture properties, a maximal thermal lift of 32°C was reached for an imaginary mixture. 17 real mixtures were also studied and enabled to reach a 21°C temperature lift. A list of other working mixtures that should be suitable was established. A 4 kW ADHT pilot unit was designed and built. The technical feasibility of this cycle was then experimentally demonstrated with this unit. A maximum temperature lift of 11°C was measured with the n-heptane / DMF mixture that is lower than the values calculated by simulation
Порядіна, Дар`я Сергіївна. "Підвищення рівня енергоефективності гімназії біотехнологій № 177 за рахунок використання сонячних колекторів." Master's thesis, КПІ ім. Ігоря Сікорського, 2019. https://ela.kpi.ua/handle/123456789/32076.
Full textMaster's thesis «Improving the energy efficiency of the high school of the latest biotechnology №177» consists of 123 pages, 15 figures, 57 tables, and also contains 20 sources in the list of references. The purpose of the work is to determine the expediency of thermo-modernization and modeling of the solar system for hot water supply in the software environment. Task of the research - calculation of thermal and electrical loads, analysis of energy consumption, determination of the economic effect of the implementation of energy conservation measures, to study the solar energy potential of Ukraine, determining the feasibility of using the solar system for hot water needs. The subject of the study is the study of the constructive and energy characteristics of the object in the development of various scenario variational models and geographic location. Actuality is the effective use of solar energy in solar systems in climates Ukraine for energy purposes. The object of study- a preschool institution №712. The scientific novelty of the master's thesis consists in evaluating the financial indicators of the project of thermo-modernization of a residential building in two ways: the calculation of the efficiency of each measure separately and modeling the solar system in the Tsol software environment.
Conference papers on the topic "Thermo-upgrading"
Almodaris, Mohamed, Sara Khorasani, Jocin James Abraham, and Nesrin Ozalp. "Simulation of Solar Thermo-Chemical Hydrogen Production Techniques." In ASME/JSME 2011 8th Thermal Engineering Joint Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ajtec2011-44387.
Full textIsmail, Islam, Ahmed Emara, and El Sayed Abdel Razek. "Thermo Mechanical Analysis of a Direct Injection Heavy Duty Diesel Engine Piston Using FEA." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-66160.
Full text