Dissertations / Theses on the topic 'Thermal renewable energy'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Thermal renewable energy.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Hinke, Themba D. "Hot thermal storage in a variable power, renewable energy system." Thesis, Monterey, California: Naval Postgraduate School, 2014. http://hdl.handle.net/10945/42645.
Full textThis thesis outlines the design of a renewable energy heat generation system with thermal storage for DOD facilities. The DOD is seeking to implement an increased percentage of renewable energy systems at its facilities in order to improve energy security and reduce energy costs. The intermittent nature of renewable energy generation, however, presents a major challenge to full implementation. This shortfall can be overcome by targeted facility-scale energy storage that allows for increased use of renewable-only systems. Since a large percentage of the electric energy used in both residential and commercial facilities is for space and water heating, thermal storage is a viable solution. Presented in this thesis is a method for designing, analyzing, and sizing a facility-scale thermal storage system. The results demonstrate thermal storage is a more cost-effective option when compared to alternatives like battery storage. In addition to being cheaper, thermal storage systems are safer, more reliable, and have a longer life cycle.
Macbeth, John Noel. "A thermal charge system for variable electrical supplies from renewable sources." Thesis, University of Aberdeen, 2013. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?pid=202380.
Full textAldaouab, Ibrahim. "Optimization and Control of Smart Renewable Energy Systems." University of Dayton / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1567770026080553.
Full textXiang, Yetao. "Experimental and computational investigation of building integrated PV thermal air system combined with thermal storage." Thesis, University of Nottingham, 2017. http://eprints.nottingham.ac.uk/42743/.
Full textAssembe, Cedric Obiang. "Integrated solar photovoltaic and thermal system for enhanced energy efficiency." Thesis, Cape Peninsula University of Technology, 2016. http://hdl.handle.net/20.500.11838/2387.
Full textSouth Africa has raised concerns regarding the development of renewable energy sources such as wind, hydro and solar energy. Integration of a combined photovoltaic and thermal system was considered to transform simultaneous energy into electricity and heat. This was done to challenge the low energy efficiency observed when the two solar energy conversion technologies are employed separately, in order to gain higher overall energy efficiency and ensure better utilization of the solar energy. Therefore, the notion of using a combined photovoltaic and thermal system was to optimize and to improve the overall PV panel efficiency by adding conversion to thermal energy for residential and commercial needs of hot water or space heating or space cooling using appropriate technology. The PV/T model constructed using water as fluid like the one used for the experimental work, presented a marginal increase in electrical efficiency but a considerable yield on the overall PV/T efficiency, because of the simultaneous operation by coupling a PV module with a thermal collectors.
Pietruschka, Dirk. "Model based control optimisation of renewable energy based HVAC Systems." Thesis, De Montfort University, 2010. http://hdl.handle.net/2086/4022.
Full textShah, Nazari Hoda. "Examining the potential for design and renewable energy to contribute to zero energy housing in Queensland." Thesis, Queensland University of Technology, 2014. https://eprints.qut.edu.au/75650/1/Hoda_Shah%20Nazari_Thesis.pdf.
Full textHumm, Jason Christopher. "An organic rankine cycle heat engine using a rock thermal battery as the heat source." Thesis, Nelson Mandela Metropolitan University, 2015. http://hdl.handle.net/10948/10960.
Full textKettenis, Christos. "Electrical supply and demand in Cyprus : optimal use of renewable energy sources in electricity production." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/electrical-supply-and-demand-in-cyprus-optimal-use-of-renewable-energy-sources-in-electricity-production(3861cfcb-8a74-4087-a114-4e0dc9557202).html.
Full textChen, Tianyu. "Simulation of the thermal and electrical performance of a novel PVT-PCM system." Thesis, University of Nottingham, 2018. http://eprints.nottingham.ac.uk/49210/.
Full textGavronski, Jorge Dariano. "Carvão mineral e as energias renováveis no Brasil." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2007. http://hdl.handle.net/10183/15450.
Full textThe population and economy growth in Brazil generate the necessity of an expansion higher than four thousand Megawatts of new electric energy per year. The Brazilian Electrical System is peculiar because of its continental extension and also its strong dependence in renewable energy (hydro). Another reason for its peculiarity is the potential of inserting other forms of renewable and “green” energy in the system. Although the environmental advantages of the “renewable”, these kinds of energies are variable and dependant of the weather conditions. In order to the electrical system be more reliable, its operation must be combined with a larger addition of thermal energy. Thus this report analyses thermal generation option in Brazil. Looking at the developed countries trends in diversify power generation, the article indicates the advantages and the priority of using, in Brazil, internal resources like coal to guarantee the self-sufficient thermal generation electrical capacity. The dissertation demonstrates the social advantages to develop the coal industry for the producers region, witch are poor areas in Brazil. The proposition points the need of implement modern technologies in order to attend the environmental legislation, which must increase the emissions restrictions as these technologies are developed.
Wang, Guangyao. "An Investigation of Phase Change Material (PCM)-Based Ocean Thermal Energy Harvesting." Diss., Virginia Tech, 2019. http://hdl.handle.net/10919/100989.
Full textDoctor of Philosophy
Elsanusi, Omer. "THERMAL ENERGY STORAGE WITH MULTIPLE FAMILIES OF PHASE CHANGE MATERIALS (PCM)." OpenSIUC, 2020. https://opensiuc.lib.siu.edu/dissertations/1852.
Full textNiaparast, Shervin. "ENERGY ANALYSIS OF A SOLAR BLIND CONCEPT INTEGRATED WITH ENERGY STORAGE SYSTEM." Thesis, KTH, Kraft- och värmeteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-131419.
Full textOlsen, Lindsay M. "Initial investigation of a novel thermal storage concept as part of a renewable energy system." Monterey, California: Naval Postgraduate School, 2013. http://hdl.handle.net/10945/34716.
Full textApproved for public release; distribution is unlimited
This thesis forms part of a larger study that aims to develop a renewable energy demonstration plant at the Naval Postgraduate School Turbopropulsion Laboratory. The architecture and design approach of the demonstration plant is outlined in this thesis. While all the components of the system are commercially available, the integration of the components is challenging. The results of the design approach presented the optimal way of integrating wind turbines, an electrical system, chiller units, and thermal storage tanks. Modular ice thermal tanks with polypropylene tubing were chosen for storage. The ice thermal storage units were selected over battery storage as they are more cost effective and potentially safer. A statistical analysis was performed using wind data from Monterey Airport, which was beneficial for choosing which wind turbines to implement in the system. The analysis determined that total energy captured by two, 4-kW vertical axis wind turbines was 2,554.8 kW-hours annually. Additionally, ANSYS Fluent was used to analyze the ice growth around the tubing at various ice and tube thicknesses. The ANSYS Fluent analysis showed that ice thickness affects the ice volume growth and change in enthalpy change more than wall thickness affects these conditions.
Bruce, Robert Alasdair Wilson. "Impacts of variable renewable generation on thermal power plant operating regimes." Thesis, University of Edinburgh, 2016. http://hdl.handle.net/1842/20387.
Full textRizea, Steven Emanoel. "Optimization of Ocean Thermal Energy Conversion Power Plants." Master's thesis, University of Central Florida, 2012. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/5462.
Full textID: 031001365; System requirements: World Wide Web browser and PDF reader.; Mode of access: World Wide Web.; Adviser: Marcel Ilie.; Title from PDF title page (viewed May 8, 2013).; Thesis (M.S.M.E.)--University of Central Florida, 2012.; Includes bibliographical references (p. 77-78).
M.S.M.E.
Masters
Mechanical and Aerospace Engineering
Engineering and Computer Science
Mechanical Engineering; Mechanical Systems
Allan, James. "The development and characterisation of enhanced hybrid solar photovoltaic thermal systems." Thesis, Brunel University, 2015. http://bura.brunel.ac.uk/handle/2438/11624.
Full textAldubyan, Mohammad Hasan. "Thermo-Economic Study of Hybrid Photovoltaic-Thermal (PVT) Solar Collectors Combined with Borehole Thermal Energy Storage Systems." University of Dayton / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1493243575479443.
Full textKamanzi, Janvier. "Thermal electric solar power conversion panel development." Thesis, Cape Peninsula University of Technology, 2017. http://hdl.handle.net/20.500.11838/2527.
Full textThe world has been experiencing energy-related problems following pressuring energy demands which go along with the global economy growth. These problems can be phrased in three paradoxical statements: Firstly, in spite of a massive and costless solar energy, global unprecedented energy crisis has prevailed, resulting in skyrocketing costs. Secondly, though the sun releases a clean energy, yet conventional plants are mainly being run on unclean energy sources despite their part in the climate changes and global warming. Thirdly, while a negligible percentage of the solar energy is used for power generation purposes, it is not optimally exploited since more than its half is wasted in the form of heat which contributes to lowering efficiency of solar cells and causes their premature degradation and anticipated ageing. The research is geared at addressing the issue related to unsatisfactory efficiencies and anticipated ageing of solar modules. The methodology adopted to achieve the research aim consisted of a literature survey which in turn inspired the devising of a high-efficiency novel thermal electric solar power panel. Through an in-depth overview, the literature survey outlined the rationale of the research interest, factors affecting the performance of PVs as well as existing strategies towards addressing spotted shortcomings. While photovoltaic (PV) panels could be identified as the most reliable platform for sunlight-to-electricity conversion, they exhibit a shortcoming in terms of following the sun so as to maximize exposure to sunlight which negatively affects PVs’ efficiencies in one hand. On the other hand, the inability of solar cells to reflect the unusable heat energy present in the sunlight poses as a lifespan threat. Strategies and techniques in place to track the sun and keep PVs in nominal operational temperatures were therefore reviewed.
Hodgins, Neil. "High speed electrical power takeoff for oscillating water columns." Thesis, University of Edinburgh, 2010. http://hdl.handle.net/1842/4642.
Full textBhardwaj, Abhinav. "Metallic Encapsulation for High Temperature (>500 °C) Thermal Energy Storage Applications." Scholar Commons, 2015. http://scholarcommons.usf.edu/etd/5843.
Full textSaadon, Syamimi. "Modeling and simulation of a ventilated building integrated photovoltaic/thermal (BIPV/T) envelope." Thesis, Lyon, INSA, 2015. http://www.theses.fr/2015ISAL0049.
Full textThe demand of energy consumed by human kind has been growing significantly over the past 30 years. Therefore, various actions are taken for the development of renewable energy and in particular solar energy. Many technological solutions have then been proposed, such as solar PV/T collectors whose objective is to improve the PV panels performance by recovering the heat lost with a heat removal fluid. The research for the improvement of the thermal and electrical productivities of these components has led to the gradual integration of the solar components into building in order to improve their absorbing area. Among technologies capable to produce electricity locally without con-tributing to greenhouse gas (GHG) releases is building integrated PV systems (BIPV). However, when exposed to intense solar radiation, the temperature of PV modules increases significantly, leading to a reduction in efficiency so that only about 14% of the incident radiation is converted into electrical energy. The high temperature also decreases the life of the modules, thereby making passive cooling of the PV components through natural convection a desirable and cost-effective means of overcoming both difficulties. A numerical model of heat transfer and fluid flow characteristics of natural convection of air is therefore undertaken so as to provide reliable information for the design of BIPV. A simplified numerical model is used to model the PVT collector so as to gain an understanding of the complex processes involved in cooling of integrated photovoltaic arrays in double-skin building surfaces. This work addresses the numerical simulation of a semi-transparent, ventilated PV façade designed for cooling in summer (by natural convection) and for heat recovery in winter (by mechanical ventilation). For both configurations, air in the cavity between the two building skins (photovoltaic façade and the primary building wall) is heated by transmission through transparent glazed sections, and by convective and radiative exchange. The system is simulated with the aid of a reduced-order multi-physics model adapted to a full scale arrangement operating under real conditions and developed for the TRNSYS software environment. Validation of the model and the subsequent simulation of a building-coupled system are then presented, which were undertaken using experimental data from the RESSOURCES project (ANR-PREBAT 2007). This step led, in the third chapter to the calculation of the heating and cooling needs of a simulated building and the investigation of impact of climatic variations on the system performance. The results have permitted finally to perform the exergy and exergoeconomic analysis
Roy, Michael Joseph. "Hydrodeoxygenation of lignin model compounds via thermal catalytic reactions." Thesis, Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/45752.
Full textMa, Chenwen. "Retrofitting a Single-family Home with Increased Use of Renewable Energy." Thesis, KTH, Installations- och energisystem, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-215962.
Full textAnderson, Matthew John. "Economic and Environmental Analysis of Cool Thermal Energy Storage as an Alternative to Batteries for the Integration of Intermittent Renewable Energy Sources." Thesis, Virginia Tech, 2015. http://hdl.handle.net/10919/51195.
Full textMaster of Science
Linde, Daniel. "Evaluation of a Flat-Plate Photovoltaic Thermal (PVT) Collector prototype." Thesis, Högskolan Dalarna, Energiteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:du-24061.
Full textLouw, Andre Du Randt. "Discrete and porous computational fluid dynamics modelling of an air-rock bed thermal energy storage system." Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/86233.
Full textENGLISH ABSTRACT: Concentrating solar power promises to be a potential solution for meeting the worlds energy needs in the future. One of the key features of this type of renewable energy technology is its ability to store energy effectively and relatively cheaply. An air-rock bed thermal energy storage system promises to be an effective and reasonably inexpensive storage system for concentrating solar power plants. Currently there is no such storage system commercially in operation in any concentrating solar power plant, and further research is required before such a system can be implemented. The main research areas to address are the thermal-mechanical behaviour of rocks, rock bed pressure drop correlations and effective and practical system designs. Recent studies have shown that the pressure drop over a packed bed of rocks is dependant on various aspects such as particle orientation relative to the flow direction, particle shape and surface roughness. The irregularity and unpredictability of the particle shapes make it difficult to formulate a general pressure drop correlation. Typical air-rock bed thermal design concepts consist of a large vertical square or cylindrical vessel in which the bed is contained. Such system designs are simple but susceptible to the ratcheting effect and large pressure drops. Several authors have proposed concepts to over-come these issues, but there remains a need for tools to prove the feasibility of the designs. The purpose of this paper is to investigate aDEM-CFD coupled approach that can aid the development of an air-rock bed thermal energy storage system. This study specifically focuses on the use of CFD. A complementary study focusses on DEM. The two areas of focus in this study are the pressure drop and system design. A discrete CFD simulation model is used to predict pressure drop over packed beds containing spherical and irregular particles. DEM is used to create randomly packed beds containing either spherical or irregularly shaped particles. This model is also used to determine the heat transfer between the fluid and particle surface. A porous CFD model is used to model system design concepts. Pressure drop and heat transfer data predicted by the discrete model, is used in the porous model to describe the pressure drop and thermal behaviour of a TES system. Results from the discrete CFD model shows that it can accurately predict the pressure drop over a packed bed of spheres with an average deviation of roughly 10%fromresults found in literature. The heat transfer between the fluid and particle surface also is accurately predicted, with an average deviation of between 13.36 % and 21.83 % from results found in literature. The discrete CFD model for packed beds containing irregular particles presented problems when generating a mesh for the CFD computational domain. The clump logic method was used to represent rock particles in this study. This method was proven by other studies to accurately model the rock particle and the rock packed bed structure using DEM. However, this technique presented problems when generating the surface mesh. As a result a simplified clump model was used to represent the rock particles. This simplified clump model showed characteristics of a packed bed of rocks in terms of pressure drop and heat transfer. However, the results suggest that the particles failed to represent formdrag. This was attributed to absence of blunt surfaces and sharp edges of the simplified clumpmodel normally found on rock particles. The irregular particles presented in this study proved to be inadequate for modelling universal characteristics of a packed bed of rocks in terms of pressure drop. The porous CFD model was validated against experimental measurement to predict the thermal behaviour of rock beds. The application of the porous model demonstrated that it is a useful design tool for system design concepts.
AFRIKAANSE OPSOMMING: Gekonsentreerde sonkrag beloof om ’n potensiële toekomstige oplossing te wees vir die wêreld se groeiende energie behoeftes. Een van die belangrikste eienskappe van hierdie tipe hernubare energie tegnologie is die vermoë om energie doeltreffend en relatief goedkoop te stoor. ’n Lug-klipbed termiese energie stoorstelsel beloof om ’n doeltreffende en redelik goedkoop stoorstelsel vir gekonsentreerde sonkragstasies te wees . Tans is daar geen sodanige stoorstelsel kommersieël in werking in enige gekonsentreerde sonkragstasie nie. Verdere navorsing is nodig voordat so ’n stelsel in werking gestel kan word. Die belangrikste navorsingsgebiede om aan te spreek is die termies-meganiese gedrag van klippe, klipbed drukverlies korrelasies en effektiewe en praktiese stelsel ontwerpe. Onlangse studies het getoon dat die drukverlies oor ’n gepakte bed van klippe afhanklik is van verskeie aspekte soos partikel oriëntasie tot die vloeirigting, partikel vormen oppervlak grofheid. Die onreëlmatigheid en onvoorspelbaarheid van die klip vorms maak dit moeilik om ’n algemene drukverlies korrelasie te formuleer. Tipiese lug-klipbed termiese ontwerp konsepte bestaan uit ’n groot vertikale vierkantige of silindriese houer waarin die gepakte bed is. Sodanige sisteem ontwerpe is eenvoudig, maar vatbaar vir die palrat effek en groot drukverliese. Verskeie studies het voorgestelde konsepte om hierdie kwessies te oorkom, maar daar is steeds ’n behoefte aanmetodes om die haalbaarheid van die ontwerpe te bewys. Die doel van hierdie studie is om ’n Diskreet Element Modelle (DEM) en numeriese vloeidinamika gekoppelde benadering te ontwikkel wat ’n lug-klipbed termiese energie stoorstelsel kan ondersoek. Hierdie studie fokus spesifiek op die gebruik van numeriese vloeidinamika. ’n Aanvullende studie fokus op DEM. Die twee areas van fokus in hierdie studie is die drukverlies en stelsel ontwerp. ’n Diskrete numeriese vloeidinamika simulasie model word gebruik om drukverlies te voorspel oor gepakte beddens met sferiese en onreëlmatige partikels. DEM word gebruik om lukraak gepakte beddens van óf sferiese óf onreëlmatige partikels te skep. Hierdie model is ook gebruik om die hitte-oordrag tussen die vloeistof en partikel oppervlak te bepaal. ’n Poreuse numeriese vloeidinamika model word gebruik omdie stelsel ontwerp konsepte voor te stel. Drukverlies en hitte-oordrag data, voorspel deur die diskrete model, word gebruik in die poreuse model om die drukverlies- en hittegedrag van ’n TES-stelsel te beskryf. Resultate van die diskrete numeriese vloeidinamikamodel toon dat dit akkuraat die drukverlies oor ’n gepakte bed van sfere kan voorspel met ’n gemiddelde afwyking van ongeveer 10%van die resultatewat in die literatuur aangetref word. Die hitte-oordrag tussen die vloeistof en partikel oppervlak is ook akkuraat voorspel, met ’n gemiddelde afwyking van tussen 13.36%en 21.83%van die resultate wat in die literatuur aangetref word. Die diskrete numeriese vloeidinamika model vir gepakte beddens met onreëlmatige partikels bied probleme wanneer ’n maas vir die numeriese vloeidinamika, numeriese domein gegenereer word. Die "clump"logika metode is gebruik om klip partikels te verteenwoordig in hierdie studie. Hierdiemetode is deur ander studies bewys om akkuraat die klip partikel en die klip gepakte bed-struktuur te modelleer deur die gebruik van DEM. Hierdie tegniek het egter probleme gebied toe die oppervlak maas gegenereer is. As gevolg hiervan is ’n vereenvoudigde "clump"model gebruik om die klip partikels te verteenwoordig. Die vereenvoudigde "clump"model vertoon karakteristieke eienskappe van ’n gepakte bed van klippe in terme van drukverlies en hitte oordrag. Die resultate het egter getoon dat die partikels nie vorm weerstand verteenwoordig nie. Hierdie resultate kan toegeskryf word aan die afwesigheid van gladde oppervlaktes en skerp kante, wat normaalweg op klip partikels gevind word, in die vereenvoudigde "clump"model. Die oneweredige partikels wat in hierdie studie voorgestel word, blykomnie geskik tewees vir die modellering van die universele karakteristieke eienskappe van ’n gepakte bed van klippe in terme van drukverlies nie. Die poreuse numeriese vloeidinamika model is met eksperimentele metings bevestig omdie termiese gedrag van klipbeddens te voorspel. Die toepassing van die poreuse model demonstreer dat dit ’n nuttige ontwerp metode is vir stelsel ontwerp konsepte.
Bialobrzeski, Robert Wetherill. "Optimization of a SEGS solar field for cost effective power output." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/24631.
Full textBanerjee, S. "Ocean energy assessment : an integrated methodology." Thesis, Coventry University, 2011. http://curve.coventry.ac.uk/open/items/16196d0d-e671-489a-ba71-f20cdb6c8df3/1.
Full textПанкевич, О. Д., О. С. Сторожук, and К. В. Юхимчук. "Використання відновлювальних джерел енергії для підвищення енергоефективності житлової будівлі." Thesis, ВНТУ, 2018. http://ir.lib.vntu.edu.ua//handle/123456789/24268.
Full textThe urgent issues of increasing the energy efficiency of residential buildings are considered. Priority measures that reduce the consumption of energy due to the use of renewable energy sources are identified.
Myska, Martin. "Possibilities with Stirling Engine and High Temperature Thermal Energy Storage in Multi-Energy Carrier System : An analysis of key factors influencing techno-economic perspective of Stirling engine and high-temperature thermal energy storage." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-53407.
Full textLlovera, Bonmatí Albert. "Market role, profitability and competitive features of thermal power plants in the Swedish future electricity market with high renewable integration." Thesis, Uppsala universitet, Elektricitetslära, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-330392.
Full textGils, Hans Christian [Verfasser], and André [Akademischer Betreuer] Thess. "Balancing of intermittent renewable power generation by demand response and thermal energy storage / Hans Christian Gils. Betreuer: André Thess." Stuttgart : Universitätsbibliothek der Universität Stuttgart, 2016. http://d-nb.info/1081367563/34.
Full textPanayiotou, Gregoris. "Thermal performance of dwellings in Cyprus and approaches for energy conservation." Thesis, Brunel University, 2014. http://bura.brunel.ac.uk/handle/2438/9204.
Full textDas, Barun Kumar. "Optimisation of stand-alone hybrid energy systems for power and thermal loads." Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2018. https://ro.ecu.edu.au/theses/2150.
Full textUsta, Yasemin. "Simulations Of A Large Scale Solar Thermal Power Plant In Turkey Using Concentrating Parabolic Trough Collectors." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612800/index.pdf.
Full texts in Kramer Junction, California. The CSTES consists of a PTC loop that drives a Rankine cycle with superheat and reheat, 2-stage high and 5-stage low pressure turbines, 5-feedwater heaters and a dearator. As a first approximation, the model did not include significant storage or back-up heating. The model&rsquo
s predictions were benchmarked against published data for the system in California for a summer day. Good agreement between the model&rsquo
s predictions and published data were found, with errors usually less than 10%. Annual simulations were run using weather data for both California and Antalya, Turkey. The monthly outputs for the system in California and Antalya are compared both in terms of absolute monthly outputs and in terms of ratios of minimum to maximum monthly outputs. The system in Antalya is found to produce30 % less energy annually than the system in California. The ratio of the minimum (December) to maximum (July) monthly energy produced in Antalya is 0.04.
Eller, Michael R. "Utilizing Economic and Environmental Data from the Desalination Industry as a Progressive Approach to Ocean Thermal Energy Conversion (OTEC) Commercialization." ScholarWorks@UNO, 2013. http://scholarworks.uno.edu/td/1733.
Full textFarah, Hamad. "Hybrid solar system for heat and electric demands in a simple housing within Sweden and China." Thesis, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-40596.
Full textEfterfrågan på tillgången till idealisk uppvärmning och effektiva tekniker har alltid varithög. Detta beror främst på utvecklingen inom arkitektur och den kalla naturen i vissaregioner som har lett till en ökad popularitet av värmemarknaden och moderniseradevärmeteknologiert. De nuvarande fjärrvärme-systemen använder kraftvärmeverk förproduktion av kraft och elektricitet. Dessa kraftvärmeanläggningar drivs till stor delgenom biomassa och under vinterperioderna ökar efterfrågan på uppvärmning mycket.Det största problemet med att förlita sig på biomassa enbart är det ständiga behovet avatt bränna avfallsprodukter som inte bara resulterar i att öka efterfrågan på konsumtionav fler avfallsprodukter utan också resulterar i att producera rester (biprodukter) sominte kan brytas ned ytterligare och därmed kan kräva användning av markutrymme fördeponering. solar-moduler å andra sidan har ökat popularitet under de senaste åren.Detta beror främst på deras extremt höga flexibla förmåga att konvertera solbestrålningtill elektrisk och termisk energi. Denna studie kommer att försöka tillhandahålla enomfattande studie av användningen av ett hybridsolsystem som kombinerar en standardPV-modul med en flatplate collector för att simulera en solar-modul samt caselera enfristående version genom att uppskatta energikraven för en enkel bostad i Sverige ochKina. Detta kommer att vara huvudmålet med studien, men möjligheterna att integreradetta hybrida solsystem tillsammans med nuvarande DH-system kommer mestadels attdiskuteras i de första avsnitten för att bevisa möjligheten att utföra ett sådant system. Detteoretiska arbetet som utförs kommer endast att innehålla simuleringar av att bara ha enfristående PV- och flatplate collector module, men att utforma ett hybrid sol- och DHsystemkommer inte att vara huvudfokus för denna studie. Resultaten i slutet avrapporten drog överraskande slutsatsen att den elektriska produktionen för den svenskacaselen var märkbart högre än den för den kinesiska caselen trots att de båda caselernabibehöll samma belastningsvärden och högre solbestrålning för den kinesiska caselen.Detta kan förklaras av skillnaden i modulpriser vid simulering genom PVsyst därinvesteringskostnaden för den svenska PV-modulen (elektrisk komponent) var ungefär3,6 gånger större än den för kinesiska, vilket innebär att PVsyst antar ett störremodulområde för svensk modul och därmed mer energiproduktion. Men när det kom tillvärmeenergiproduktionen, var det möjligt att anta olika samlarfall och följaktligen valdesett område på 7m2 för det svenska perspektivet medan ett område på 4m2 har beaktatsför den kinesiska och värmevärden för användbar energi där jämfördes sedan med dekrav som krävs för uppvärmning i båda fallen. Slutligen drog avhandlingen slutsatsen attdet inte fanns något krav på att ha ett integrerat DH-nätverk i de fristående husen ochdärför kan det vara mer fördelaktigt att ha ett integrerat DH och solsystem i tätarebebyggda bostadsområden.
Thirkill, Adam. "Evaluating the uncertainty in the performance of small scale renewables." Thesis, Loughborough University, 2015. https://dspace.lboro.ac.uk/2134/19122.
Full textZeid, Nayef. "An Overview of PVT Module for the Extraction of Electricity and Heat." Thesis, Högskolan i Gävle, Avdelningen för byggnadsteknik, energisystem och miljövetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-33998.
Full textDemirocak, Emre Dervis. "Thermodynamic And Economic Analysis Of A Solar Thermal Powered Adsorption Cooling System." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12610110/index.pdf.
Full textmass recovery cycles are presented. Secondly, adsorption characteristics of three adsorbent/adsorbate pairs which are zeolite-water, silica gel-water and activated carbon-methanol are given. Following this, load side (i.e., building) of the system is designed and parameters that should be considered in building design are presented. Then, solar-thermal cooling system design methodology with an emphasis on solar fraction is presented. In addition, system parameters effecting the performance of the adsorption cooling system are analyzed and results are presented. Finally, economic analysis is done in order to understand the economic feasibility of the solar-thermal cooling systems compared to conventional cooling systems. TRNSYS is used for the yearly simulations and an integrated model of the overall system is developed in TRNSYS. Since energy consumption and performance investigations of environment-dependent systems such as building HVAC, refrigeration systems and solar collectors usually require weather information, typical meteorological year (TMY) data for Antalya is also generated in order to be used in the analysis of the system parameters.
Strand, Anna. "Optimization of energy dispatch in concentrated solar power systems : Design of dispatch algorithm in concentrated solar power tower system with thermal energy storage for maximized operational revenue." Thesis, KTH, Kraft- och värmeteknologi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264410.
Full textKoncentrerad solkraft (CSP) är en snabbt växande teknologi för elektricitets-produktion. Med speglar (heliostater) koncentreras solstrålar på en mottagare som genomflödas av en värmetransporteringsvätska. Denna uppnår därmed höga temperaturer vilket används för att driva en ångturbin för att generera el. Ett CSP kraftverk är oftast kopplat till en energilagringstank, där värmelagringsvätskan lagras innan den används för att generera el. El säljs i de flesta fall på en öppen elmarknad, där spotpriset fluktuerar. Det är därför av stor vikt att generera elen och sälja den vid de timmar med högst elpris, vilket också är av ökande betydelse då supportmekanismerna för att finansiellt stödja förnybar energiproduktion används i allt mindre grad för denna teknologi då den börjar anses mogen att konkurrera utan. Ett solkraftverk har således ett driftsprotokoll som bestämmer när el ska genereras. Dessa protokoll är oftast förutbestämda, vilket innebär att en optimal produktion inte fås då exempelvis elspotpriset och solinstrålningen varierar. I detta examensarbete har en optimeringsalgoritm för elförsäljning designats (i MATLAB). Optimeringsscriptet är designat genom att för en given tidsperiod lösa ett optimeringsproblem där objektivet är maximerad vinst från såld elektricitet från solkraftverket. Funktionen tar hänsyn till timvist varierande elpris, timvist varierande solfältseffektivitet, energiflöden i solkraftverket, kostnader för uppstart (on till off) samt villkor för att logiskt styra de olika driftlägena. För att jämföra prestanda hos ett solkraftverk med det optimerade driftsprotokollet skapades även två traditionella förutbestämda driftprotokoll. Dessa tre driftsstrategier utvärderades i tre olika marknader, en med ett varierande el-spotpris, en i en reglerad elmarknad med tre prisnivåer och en i en marknad med spotpris men noll-pris under de soliga timmarna. Det fanns att det optimerade driftsprotokollet gav både större elproduktion och högre vinst i alla marknader, men störst skillnad fanns i de öppna spotprismarknaderna. För att undersöka i vilket slags kraftverk som protokollet levererar mest förbättring i gjordes en parametrisk analys där storlek på lagringstank och generator varierades, samt optimerarens tidshorisont och kostnad för uppstart. För lagringstank och generator fanns att vinst ökar med ökande storlek upp tills den storlek optimeraren har möjlighet att fördela produktion på dyrast timmar. Ökande storlek efter det ger inte ökad vinst. Ökande tidshorisont ger ökande vinst eftersom optimeraren då har mer information. Att ändra uppstartkostnaden gör att solkraftverket uppträder mindre flexibelt och har färre cykler, dock utan så stor påverkan på inkomst.
Ebrahim, Mila. "Performance Evaluation of a Photovoltaic/Thermal (PVT) Collector with Numerical Modelling." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-302122.
Full textEn panel med kombinerad teknik av både solceller och termisk solfångare (PVT) kan producera både elektricitet och värme samtidigt. Forskning har visat att det kan finnas flera fördelar med att integrera PVT-paneler med ett bergvärmesystem, eftersom det mjliggör lagring av termisk energi över året. Dessutom leder ett sådant system till lägre drifttemperaturer som kan öka PVT-panelens effektivitet och livslängd. Syftet med studien är att presentera den elektriska och termiska prestandan av en PVT-panel utvecklat av Solhybrid i Småland AB för olika driftförhållanden som kan uppstå på grund av olika väderförhållanden och inlopps-temperaturer när panelerna är kopplade till ett bergvärmesystem. Vidare utvärderas prestandan för denna panel med ASHRAEmetoden (standard 93-2003), för att möjliggöra jämförelse med andra PVT-paneler. Modelleringsverktyget som använts i studien är mjukvaran COMSOL Multiphysics, som använder finita elementmetoden för att lösa partiella differentialekvationer i värmeöverförings-och flödesproblem. Baserat på prestandakurvorna som presenteras i resultatet, är den termiska och elektriska verkningsgraden approximativt 48.0-53.4% respektive 19.0-19.2% för en reducerad temperatur med värdet noll, en solstrålning mellan 800-1000 W/m2, för en massflödeshastighet på 0.026 kg/sm2 som beslutades som den mest lämpliga för att öka den termiska prestandan. Resultaten resulterade i en värmeavledningsfaktor (FR) och total värmeförlustkoefficient (UL) på 0.56-0.62 respektive 53.4-53.5 W/m2 K. Resultaten på PVT-panelens prestanda under olika väderförhållanden visar att vattnets inloppstemperatur kan påverka drifttiden och mängden termisk energi som kan extraheras under året avsevärt, speciellt i nordiskt klimat. För att bedöma korrektheten i resultaten och den skapade modellen rekommenderas experimentell testning av den studerade PVT-panelen.
Caglar, Ahmet. "Design And Experimental Testing Of An Adsorbent Bed For A Thermal Wave Adsorption Cooling Cycle." Phd thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614754/index.pdf.
Full textKarki, Bipin. "Experimental and Life Cycle Analysis of a Solar Thermal Adsorption Refrigeration (STAR) Using Ethanol - Activated Carbon." University of Dayton / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1524583058600568.
Full textSchön, Gustav. "NUMERICAL MODELLING OF A NOVEL PVT COLLECTOR AT CELL RESOLUTION." Thesis, KTH, Energiteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-212731.
Full textEn kombinerad solcellspanel och solvärmefångare (PVT) producerar värme och elenergi på samma yta genom att en värmeväxlare upptar värmen från baksidan av solcellspanelen. Den PVT som berörs i denna studien är nyutvecklad och har aldrig tidigare testats, vilket medför att data för hur den beter sig samt dess termo-elektiska prestanda saknas för olika driftförhållanden samt flödeskonfigurationer. Vidare ger mediet som flödar genom värmeväxlaren upphov till en temperaturgradient, vilken kan innebära en påtaglig skillnad i temperatur mellan solcellerna i solcellspanelen vid mediets in- respektive utlopp. Trots solcellers temperaturkänslighet, så sker simulering i allmänhet med avseende på panelens medeltemperatur istället för att hänsyn tas till denna temperaturgradient. I den här studien implementeras en så kallad ”single diode”-modell i en kommersiell numerisk mjukvara termiska beräkningar för att samsimulera termiskt och elektriskt effektuttag ur den nyutvecklade PVT-designen. Designen modelleras statiskt under givna variationer av vindhastighet, inloppstemperatur, omgivande temperatur, flödeshastighet, solinstrålning och konvektionskoefficienter för mediet samt baksidan av modulen. Resultaten visar att kontrollerbara variabler som inloppstemperatur har högst inverkan på den totala effekten samt att en parallell flödeskonfiguration lämpar sig bäst. Studien visar också att skillnaden mellan simulering på cellnivå och modulnivå inte motiverar en numerisk beräkningsmetod med upplösning satt till solcellsnivå.
Gimeno, Furió Alexandra. "On the use of nanofluids to enhance the direct absorption of solar radiation." Doctoral thesis, Universitat Jaume I, 2019. http://hdl.handle.net/10803/666638.
Full textLa presente tesis trata de evaluar el potencial de los nanofluidos solares para absorber directamente la radiación solar e intentar generar vapor. Como el consumo de energía continúa aumentando y las fuentes de energía convencionales se están agotando, aparece como excelente alternativa, el uso de las energías renovables, concretamente, la energía solar térmica. Los sistemas actuales de energía solar térmica presentan numerosas pérdidas debido a los procesos de transferencia de calor, por ello, se han propuesto los nanofluidos solares como absorbedores de la radiación y fluidos de transferencia de calor y así, mejorar la eficiencia del proceso de generación de vapor en las centrales solares térmicas. En este trabajo, se ha realizado la caracterización de las propiedades ópticas de diferentes nanofluidos solares basados en nanopartículas de carbón para estudiar su idoneidad en la aplicación solar térmica.
Vacek, Tomáš. "Posouzení možnosti připojení kogenerační výrobny 138 MW v Prostějově." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219083.
Full textMacoszek, Pavel. "Kogenerační jednotky na rostlinný olej." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220164.
Full text