Relevant bibliographies by topics / Thermal properties

Academic literature on the topic 'Thermal properties'

Author: Grafiati
Published: 4 June 2021
Last updated: 14 September 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Thermal properties.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Thermal properties"

1

Sinha, Dr Deepa A. "Thermal Properties of Concrete." Paripex - Indian Journal Of Research 3, no. 2 (January 15, 2012): 90–91. http://dx.doi.org/10.15373/22501991/feb2014/27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Padal, K. T. B., K. Ramji, and V. V. S. Prasad. "Thermal Properties of Jute Nanofibre Reinforced Composites." International Journal of Engineering Research 3, no. 5 (May 1, 2014): 333–35. http://dx.doi.org/10.17950/ijer/v3s5/510.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Vigneshwaran, V., V. K. Aravindraman, and K. Venkatachalam V. Raveendran. "Thermal Transport Properties Analysis of MWCNT-RT21Nanofluids." International Journal of Trend in Scientific Research and Development Volume-3, Issue-2 (February 28, 2019): 641–43. http://dx.doi.org/10.31142/ijtsrd21435.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Oloyede Christopher, Tunji, Bukola Akande Fatai, Olaniyi Oriola Kazeem, and Oluwatoyin Oniya Oluwole. "Thermal properties of soursop seeds and kernels." Research in Agricultural Engineering 63, No. 2 (June 20, 2017): 79–85. http://dx.doi.org/10.17221/22/2016-rae.

Full text
Abstract:
The thermal properties of soursop seeds and kernels were determined as a function of moisture content, ranged from 8.0 to 32.5% (d.b.). Three primary thermal properties: specific heat capacity, thermal conductivity and thermal diffusivity were determined using Dual-Needle SH-1 sensors in KD2-PRO thermal analyser. The obtained results shown that specific heat capacity of seeds and kernels increased linearly from 768 to 2,131 J/kg/K and from 1,137 to 1,438 J/kg/K, respectively. Seed thermal conductivity increased linearly from 0.075 to 0.550 W/m/K while it increased polynomially from 0.153 to 0.245 W/m/K for kernel. Thermal diffusivity of both seeds and kernels increased linearly from 0.119 to 0.262 m<sup>2</sup>/s and 0.120 to 0.256 m<sup>2</sup>/s, respectively. Analysis of variance results showed that the moisture content has a significant effect on thermal properties (p ≤ 0.05). These values indicated the ability of the material to retain heat which enhances oil recovery and can be used in the design of machine and selection of suitable methods for their handling and processing.
APA, Harvard, Vancouver, ISO, and other styles
5

Dandapani, Dandapani, and K. Devendra. "Thermal Properties of Graphene based Polymer Nanocomposites." Indian Journal Of Science And Technology 15, no. 45 (December 5, 2022): 2508–14. http://dx.doi.org/10.17485/ijst/v15i45.1824.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Shu Xian Tiew and Misni Misran, Shu Xian Tiew and Misni Misran. "Thermal Properties of Acylated Low Molecular Weight Chitosans." Journal of the chemical society of pakistan 41, no. 2 (2019): 207. http://dx.doi.org/10.52568/000733/jcsp/41.02.2019.

Full text
Abstract:
Acylated low molecular weight chitosans (LChA) were prepared from nucleophilic acylation of chitosan using acid anhydrides of short and medium chain length (4 - 10) to study the response of applied heat as a function of acyl chain length. Thermogravimetric analysis (TGA) revealed the decomposition of LChA consisted of glucosamine and acyl-glucosamine units around 141 - 151and#176;C to 400 - 410and#176;C. Both TGA and differential scanning calorimetry (DSC) analyses indicated that the introduction of acyl groups disrupted the hydrogen bonding of chitosan, the effect was more prominent as the degree of substitution and chain length of LChA increased. Grafting of acyl chains lowered the kinematic viscosity of LChA as the disruption of hydrogen bonding led to decreased hydrodynamic volume. Field emission scanning electron micrographs showed that LChA with longer chains having larger particle size due to bigger occupancy volume of acyl chains during spray drying.
APA, Harvard, Vancouver, ISO, and other styles
7

Nevin Cankaya, Nevin Cankaya. "Grafting of Chitosan: Structural, Thermal and Antimicrobial Properties." Journal of the chemical society of pakistan 41, no. 2 (2019): 240. http://dx.doi.org/10.52568/000735/jcsp/41.02.2019.

Full text
Abstract:
In this study, some new chitosan materials were synthesized by the grafting of chitosan with the monomers such as 1-vinylimidazole (VIM), methacrylamide (MAm) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS). First of all, chitosan methacrylate was prepared by esterification of primary -OH group with methacryloyl chloride a 25.13% yield by mole. The monomers were grafted into chitosan methacrylate via free radical polymerization using 2,2and#39;-Azobisisobutyronitrile as an initiator in N,N-dimethylformamide. The graft copolymers were characterized by FT-IR spectra and elemental analysis. Thermal stabilities of the graft copolymers were determined by TGA (thermo gravimetric analysis) method. The synthesized chitosan methacrylate and its graft copolymers were tested for their antimicrobial activity against bacteria and yeast.
APA, Harvard, Vancouver, ISO, and other styles
8

Kodešová, R., M. Vlasáková, M. Fér, D. Teplá, O. Jakšík, P. Neuberger, and R. Adamovský. "Thermal properties of representative soils of the Czech Republic." Soil and Water Research 8, No. 4 (October 31, 2013): 141–50. http://dx.doi.org/10.17221/33/2013-swr.

Full text
Abstract:
Knowledge of soil thermal properties is essential when assessing heat transport in soils. Thermal regime of soils is associated with many other soil processes (water evaporation and diffusion, plant transpiration, contaminants behaviour etc.). Knowledge of thermal properties is needed when assessing effectivity of energy gathering from soil profiles using horizontal ground heat exchangers, which is a topic of our research project. The study is focused on measuring of thermal properties (thermal conductivity and heat capacity) of representative soils of the Czech Republic. Measurements were performed on soil samples taken from the surface horizons of 13&nbsp;representative soil types and from 4 soil substrates, and on mulch (bark chips) sample using KD2 PRO device with TR-1 and SH-1 sensors. The measured relationships between the thermal conductivity and volumetric soil-water content were described by the non-linear equations and those between the volumetric heat capacity and volumetric soil-water content were expressed using the linear equations. The highest thermal conductivities were measured in soils on quartz sand substrates. The lowest thermal conductivities were measured in the Stagnic Chernozem Siltic on marlite and the Dystric Cambisol on orthogneiss. The opposite trend was observed for maximal heat capacities, i.e. the highest values were measured in the Stagnic Chernozem Siltic and the lowest in sand and soils on sand and sandy gravel substrate.
APA, Harvard, Vancouver, ISO, and other styles
9

Mohan, B. Sathish, Y. Pavan Kumar, and D. Ramadevi K. Basavaiah. "Investigation of Structural and Thermal Properties of Nanostructured PANI." International Journal of Trend in Scientific Research and Development Volume-2, Issue-5 (August 31, 2018): 1024–28. http://dx.doi.org/10.31142/ijtsrd16970.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Adamiv, V. T. "Thermal properties of alkaline and alkaline-earth borate glasses." Functional Materials 20, no. 1 (March 25, 2013): 52–58. http://dx.doi.org/10.15407/fm20.01.052.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Thermal properties"

1

Yam, Chi-wai, and 任志偉. "Effect of internal thermal mass on building thermal performance." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B27770631.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

BARBARINO, GIULIANA. "Thermal properties of graphene and graphene-based thermal diodes." Doctoral thesis, Università degli Studi di Cagliari, 2016. http://hdl.handle.net/11584/266670.

Full text
Abstract:
In the perspective of manipulating and controlling heat fluxes, graphene represents a promising material revealing an unusually high thermal conductivity �. However, both experimental and theoretical previous works lack of a strict thermal conductivity value, estimating results in the range 89-5000 W m-1 K-1. In this scenario, I address graphene thermal transport properties by means of molecular dynamics simulations using the novel "approach to equilibrium molecular dynamics" (AEMD) technique. The first issue is to offer some insight on the active debate about graphene thermal conductivity extrapolation for infinite sample. To this aim, I perform unbiased (i.e. with no a priori guess) direct atomistic simulations aimed at estimating thermal conductivity in samples with increasing size up to the unprecedented value of 0.1 mm. The results provide evidence that thermal conductivity in graphene is definitely upper limited, in samples long enough to allow a diffusive transport regime for both single and collective phonon excitations. Another important issue is to characterize at atomistic level the experimental techniques used to estimate graphene thermal conductivity. Some of these use laser source to provide heat. For these reasons, I deal with the characterization of the transient response to a pulsed laser focused on a circular graphene sample. In order to reproduce the laser effect on the sample, the K - A01 and
APA, Harvard, Vancouver, ISO, and other styles
3

Abdulla, A. Y. "Thermal transport properties of polymers." Thesis, University of Bradford, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hsu, Chia-Hao. "Optimizing the thermal material in the thermally actuated magnetization (TAM) flux pump system." Thesis, University of Cambridge, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.648197.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Smith, D. I. "Thermal transport properties of polymers." Thesis, University of Bradford, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.379802.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Neglur, Rekha R. "Physical properties of solid-state erythromycin derived compounds." Thesis, Nelson Mandela Metropolitan University, 2016. http://hdl.handle.net/10948/7228.

Full text
Abstract:
This thesis investigated the physical properties of the macrolide antibiotics: Erythromycin dihydrate (EM-DH), Roxithromycin monohydrate (RM-MH) and Azithromycin dihydrate (AZM-DH). The abovementioned hydrate compounds were investigated in terms of the hydrate-anhydrate crystal structure stability, dehydration and observed polymorphism under controlled temperature heating programs. Identified hydrate and anhydrate polymorphs were subjected to physical stability testing during controlled storage. EM-DH was characterized by thermal analysis (DSC, TGA), X-ray diffraction, FTIR and microscopy. Dehydration of EM-DH at temperatures of 100, 157 and 200°C (followed by supercooling to 25°C) produced the form (I) anhydrate (Tm =142.9°C), form (II) anhydrate (Tm = 184.7°C ) and amorph (II) (Tg = 118°C) respectively. The attempts to produce amorph (I) from melting (in vicinity of form (I) melt over temperature range 133°C to 144°C) and supercooling was unsuccessful due to the high crystallization tendency of the form (I) melt. Brief humidity exposure and controlled temperature (40°C)/ humidity storage for 4 days (0-96% RH) revealed hygroscopic behaviour for the anhydrate crystal (forms (I) and (II)) and amorph (II) forms. Form (II) converted to a nonstoichiometric hydrate where extent of water vapour absorption increased with increased storage humidity (2.1% absorbed moisture from recorded TGA at 96% RH). Amorph (II) exhibited similar trends but with greater water absorption of 4.7% (recorded with TGA) at 96% RH. The pulverization and sieving process of amorph (II) (at normal environmental conditions) was accompanied by some water vapour absorption (1.1%). A slightly lower absorbed moisture content of 3.3% (from TGA) after controlled 4 days storage at 40°C/ 96% RH was recorded. This suggested some physical instability (crystallization tendency) of amorph (II) after pulverization. The thermally induced dehydration of RM-MH by DSC-TG was evaluated structurally (SCXRD), morphologically (microscopy) and by kinetic analysis. Various kinetic analysis approaches were employed (advanced, approximation based integral and differential kinetic analysis methods) in order to obtain reliable dehydration kinetic parameters. The crystal structure was little affected by dehydration as most H-bonds were intramolecular and not integral to the crystal structure stability. Kinetic parameters from thermally stimulated dehydration indicated a multidimensional diffusion based mechanism, due to the escape of water from interlinked voids in crystal. The hygroscopicity of the forms RM-MH, Roxithromycin-anhydrate and amorph glass (Tg = 81.4°C) were investigated. Roxithromycinanhydrate (crystalline) converted readily to RM-MH which were found to be compositionally stable over the humidity range 43-96%RH. Amorphous glass exhibited increased water vapour absorption with increasing storage humidity (40°C/ 0-96% RH). TG analysis suggested a moisture content of 3.5% at 96% RH after 4 storage days. DSC and powder XRD analysis of stored pulverised amorphous glass indicated some physical instability due to water induced crystallization. Commercial AZM-DH and its modifications were characterized by thermal analysis (DSC, TGA), SC-XRD and microscopy. Thermally stimulated dehydration of AZM-DH occurred in a two-step process over different temperature ranges. This was attributed to different bonding environments for coordinated waters which were also verified from the crystal structure. Dehydration activation energies for thermally stimulated dehydration were however similar for both loss steps. This was attributed to similarities in the mode of H- bonding. Different forms of AZM were prepared by programmed temperature heating and cooling of AZM-DH. The prepared forms included amorphous glass (melt supercooling), amorphous powder (prepared below crystalline melting temperature), crystalline anhydrate and crystalline partial dehydrate. Humidity exposure indicated hygroscopic behaviour for the amorphous, crystalline anhydrate and crystalline partial dehydrate modifications. Both the crystalline anhydrate and partial dehydrate modifications converted to the stoichiometric dihydrate form (AZM-DH) at normal environmental conditions at ambient temperature. Both the amorph glass and amorph powder exhibited increased moisture absorption with increased humidity exposure. TG analysis of the pulverised amorph glass indicated a moisture content of 5.1% at 96% RH after 4 storage days. The absence of crystalline melt in DSC and presence of Tg (106.9°C) indicated the sample remained amorphous after pulverisation and storage for 4 days at 40°C/ 96% RH.
APA, Harvard, Vancouver, ISO, and other styles
7

Tang, Xiaoli Dong Jianjun. "Theoretical study of thermal properties and thermal conductivities of crystals." Auburn, Ala, 2008. http://repo.lib.auburn.edu/EtdRoot/2008/SUMMER/Physics/Dissertation/Tang_Xiaoli_9.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Batey, G. J. "Thermal measurements in helium." Thesis, University of Nottingham, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.376489.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dempsey, Benjamin. "Thermal properties of linear cellular alloys." Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/17968.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lind, Cora. "Negative thermal expansion materials related to cubic zirconium tungstate." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/30861.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Thermal properties"

1

Martin, Hollins, Covell Allan, and Advanced physicsproject for independent learning., eds. Thermal properties. London: Murray in association with Inner London Education Authority, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Institution, British Standards. Determining thermal insulating properties. London: BSI, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Robertson, Eugene C. Thermal properties of rocks. [Denver, Colo.?]: U.S. Dept. of the Interior, Geological Survey, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Robertson, Eugene C. Thermal properties of rocks. [Denver, Colo.?]: U.S. Dept. of the Interior, Geological Survey, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Grimvall, Göran. Thermophysical properties of materials. Amsterdam: Elsevier, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jannot, Yves, and Alain Degiovanni. Thermal Properties Measurement of Materials. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119475057.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

A, Schneider Gerold, Petzow G, North Atlantic Treaty Organization. Scientific Affairs Division., and NATO Advanced Research Workshop on the Thermal Shock and Thermal Fatigue Behavior of Advanced Ceramics (1992 : Munich, Germany), eds. Thermal shock and thermal fatigue behavior of advanced ceramics. Dordrecht: Kluwer Academic Publishers, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

F, Mathot Vincent B., and Benoist L, eds. Calorimetry and thermal analysis of polymers. Munich: Hanser Publishers, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Platzer, B. Thermophysical properties of refrigerants. Berlin: Springer-Verlag, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rabinovich, V. A. Moist gases: Thermodynamic properties. New York: Begell House, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Thermal properties"

1

Boulos, Maher I., Pierre Fauchais, and Emil Pfender. "Thermodynamic Properties." In Thermal Plasmas, 213–64. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4899-1337-1_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Boulos, Maher I., Pierre Fauchais, and Emil Pfender. "Transport Properties." In Thermal Plasmas, 265–323. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4899-1337-1_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ibach, Harald, and Hans Lüth. "Thermal Properties." In Advanced Texts in Physics, 115–36. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-662-05342-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wyrzykowski, Mateusz, Agnieszka Knoppik, Wilson R. Leal da Silva, Pietro Lura, Tulio Honorio, Yunus Ballim, Brice Delsaute, Stéphanie Staquet, and Miguel Azenha. "Thermal Properties." In Thermal Cracking of Massive Concrete Structures, 47–67. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76617-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fend, Thomas, Dimosthenis Trimis, Robert Pitz-Paal, Bernhard Hoffschmidt, and Oliver Reutter. "Thermal Properties." In Cellular Ceramics, 342–60. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527606696.ch4c.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sirdeshmukh, Dinker B., Lalitha Sirdeshmukh, and K. G. Subhadra. "Thermal Properties." In Atomistic Properties of Solids, 291–327. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-19971-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dasari, Aravind, Zhong-Zhen Yu, and Yiu-Wing Mai. "Thermal Properties." In Engineering Materials and Processes, 161–84. London: Springer London, 2016. http://dx.doi.org/10.1007/978-1-4471-6809-6_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Buck, Wolfgang, and Steffen Rudtsch. "Thermal Properties." In Springer Handbook of Metrology and Testing, 453–83. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-16641-9_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ibach, Harald, and Hans Lüth. "Thermal Properties." In Solid-State Physics, 113–34. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-93804-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, Zeyu, and Tengfei Luo. "Thermal Properties." In Gallium Oxide, 535–47. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-37153-1_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Thermal properties"

1

Nikolić, P. M., Z. Djinović, D. M. Todorović, V. Jović, Z. Djurić, A. I. Bojičić, D. Urošević, and V. Blagojević. "Thermal properties of." In PHOTOACOUSTIC AND PHOTOTHERMAL PHENOMENA. ASCE, 1999. http://dx.doi.org/10.1063/1.58221.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Weidman, D. L., M. A. Newhouse, and D. W. Hall. "Thermal Effects in Ultrafast Photonic Switches." In Nonlinear Optical Properties of Materials. Washington, D.C.: Optica Publishing Group, 1988. http://dx.doi.org/10.1364/nlopm.1988.mf13.

Full text
Abstract:
The performance of a nonlinear device may be significantly altered by thermal effects. The heat generated by the absorption of power from the switching laser can induce thermal index changes which may overwhelm the photonic index changes. Here a model of these thermal effects is presented, and expressions for the relationship of thermal to photonic index changes are derived. Previous workers have considered heating due to a single pulse.1 Our treatment snows that, for the appropriate material and device parameter ranges, cumulative thermal build-up will be important in the envisioned high-data-rate systems. Using these results, we compare the potential performance characteristics of various materials, including experimental heavy-metal glasses which show large nonlinear effects.
APA, Harvard, Vancouver, ISO, and other styles
3

Kelkar, Deepali S., Ashish B. Chourasia, Arun Pratap, and N. S. Saxena. "Thermal Properties of Doped Polythiophene." In 5TH NATIONAL CONFERENCE ON THERMOPHYSICAL PROPERTIES: (NCTP-09). AIP, 2010. http://dx.doi.org/10.1063/1.3466565.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

ISHII, NORIYOSHI, and HIDEO SUGANUMA. "PROPERTIES OF THERMAL GLUEBALLS." In Proceedings of the International Conference. WORLD SCIENTIFIC, 2004. http://dx.doi.org/10.1142/9789812702845_0038.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nelson, Cameron, Jesse Galloway, and Phillip Fosnot. "Extracting TIM properties with localized transient pulses." In 2014 30th Semiconductor Thermal Measurement & Management Symposium (SEMI-THERM). IEEE, 2014. http://dx.doi.org/10.1109/semi-therm.2014.6892218.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Brown, E. "Thermal Measurements on Multi-wall Nanotubes." In ELECTRIC PROPERTIES OF SYNTHETIC NANOSTRUCTURES: XVII International Winterschool/Euroconference on Electronic Properties of Novel Materials. AIP, 2004. http://dx.doi.org/10.1063/1.1812049.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chien, Sze-Foo. "Critical Flow Properties of Wet Steam." In SPE International Thermal Operations Symposium. Society of Petroleum Engineers, 1993. http://dx.doi.org/10.2118/25804-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gurupatham, Sathish Kumar, Carson L. Wiles, and Navid Nasajpour-Esfahani. "THERMAL PROPERTIES OF CLOVE SEEDS." In 5-6th Thermal and Fluids Engineering Conference (TFEC). Connecticut: Begellhouse, 2021. http://dx.doi.org/10.1615/tfec2021.bio.036300.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Saxena, Narendra S., Neeraj Jain, P. Predeep, S. Prasanth, and A. S. Prasad. "Thermal and Mechanical Characterization of Aniline-Formaldehyde Copolymer." In THERMOPHYSICAL PROPERTIES OF MATERIALS AND DEVICES: IVth National Conference on Thermophysical Properties - NCTP'07. AIP, 2008. http://dx.doi.org/10.1063/1.2927593.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Badalan, N., and P. Svasta. "Analysis of LEDs thermal properties." In 2016 IEEE 22nd International Symposium for Design and Technology in Electronic Packaging (SIITME). IEEE, 2016. http://dx.doi.org/10.1109/siitme.2016.7777267.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Thermal properties"

1

Johra, Hicham. Thermal properties of common building materials. Department of the Built Environment, Aalborg University, January 2019. http://dx.doi.org/10.54337/aau294603722.

Full text
Abstract:
The aim of this technical report is to provide a large collection of the main thermos-physical properties of various common construction materials and materials composing the elements inside the indoor environment of residential and office buildings. The Excel file enclosed with this document can be easily used to find thermal properties of materials for building energy and indoor environment simulation or to analyze experimental data. Note: A more recent version of that report and database are available at: https://vbn.aau.dk/en/publications/thermal-properties-of-building-materials-review-and-database
APA, Harvard, Vancouver, ISO, and other styles
2

Carmack, Jon, Lori Braase, Cynthia Papesch, David Hurley, Michael Tonks, Yongfeng Zhang, Krzysztof Gofryk, et al. Thermal Properties Measurement Report. Office of Scientific and Technical Information (OSTI), August 2015. http://dx.doi.org/10.2172/1230075.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Steimke, J., Z. Qureshi, M. Restivo, and H. Guerrero. REACTOR GROUT THERMAL PROPERTIES. Office of Scientific and Technical Information (OSTI), January 2011. http://dx.doi.org/10.2172/1012544.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gilliam, T. M., and I. L. Morgan. Shale: Measurement of thermal properties. Office of Scientific and Technical Information (OSTI), July 1987. http://dx.doi.org/10.2172/6163318.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Glascoe, E. A., H. C. Turner, and A. E. gash. Thermal Analysis and Thermal Properties of ANPZ and DNDMP. Office of Scientific and Technical Information (OSTI), November 2014. http://dx.doi.org/10.2172/1182242.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bentz, Dale P., Amanda Forster, Kirk Rice, and Michael Riley. Thermal properties and thermal modeling of ballistic clay box. Gaithersburg, MD: National Institute of Standards and Technology, 2011. http://dx.doi.org/10.6028/nist.ir.7840.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kawanaka, H., H. Nakotte, E. Brueck, K. Prokes, N. H. Kim-Ngan, T. Takabatake, H. Fujii, and J. Sakurai. Thermal properties of UPdSn and UCuSn. Office of Scientific and Technical Information (OSTI), September 1996. http://dx.doi.org/10.2172/378870.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Steimke, J. L., and M. D. Fowley. Measurement of Thermal Properties of Saltstone. Office of Scientific and Technical Information (OSTI), May 1998. http://dx.doi.org/10.2172/676757.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

McEligot, Donald, W. David Swank, David L. Cottle, and Francisco I. Valentin. Thermal Properties of G-348 Graphite. Office of Scientific and Technical Information (OSTI), May 2016. http://dx.doi.org/10.2172/1330693.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

McEligot, Donald M., W. David Swank, David L. Cottle, and Francisco I. Valentin. Thermal Properties of G-348 Graphite. Office of Scientific and Technical Information (OSTI), April 2017. http://dx.doi.org/10.2172/1355904.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Thermal properties' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography