Log in

Relevant bibliographies by topics / THERMAL PERFORMANCE ANALYSIS / Journal articles

To see the other types of publications on this topic, follow the link: THERMAL PERFORMANCE ANALYSIS.

Journal articles on the topic 'THERMAL PERFORMANCE ANALYSIS'

Author: Grafiati

Published: 11 September 2023

Last updated: 4 November 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'THERMAL PERFORMANCE ANALYSIS.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Boonsu, R., S. Sukchai, S. Hemavibool, and S. Somkun. "Performance Analysis of Thermal Energy Storage Prototype in Thailand." Journal of Clean Energy Technologies 4, no. 2 (2015): 101–6. http://dx.doi.org/10.7763/jocet.2016.v4.261.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

subramanian, G. Bala, and P. Bala shanmugam. "Performance Analysis of Solar Water Purification by using Thermal Method." Global Journal For Research Analysis 3, no. 8 (June 15, 2012): 90–92. http://dx.doi.org/10.15373/22778160/august2014/27.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Machado, H. A., and A. G. Ramos. "PERFORMANCE ANALYSIS OF THERMAL DIODES." Revista de Engenharia Térmica 5, no. 2 (December 31, 2006): 66. http://dx.doi.org/10.5380/reterm.v5i2.61853.

Full text

Abstract:

The thermal diode consists in a common brick empty inside, where the internal cavity is geometrically arranged as two rectangles, disposed one over the other but not aligned. When the lower side is heated, natural convection in the air inside yields high heat transfer rates from this side to the other. When the upper side is heated, the heat transfer should run by pure conduction, and the brick with air inside works as a thermal insulator. As this brick allows a good conductance in one direction and insulation in the opposite sense, it behaves as an electric diode, being known as thermal diode. This principle is already known for a long time, but its use is still not extensive, and there are no basic rules for the cavity design or even a theoretical study of viability for this use replacing the conventional insulation systems. The objective of this work is to simulate the heat transfer process inside a thermal diode, in order to obtain the optimal geometry and dimensions and to verify the viability of its use in buildings for thermal optimization. The numerical data are validated through comparing with that obtained from the test applied to cellular concrete bricks.

APA, Harvard, Vancouver, ISO, and other styles

4

PERVEZ, Sardar Hamza, Muhammad Ali KAMRAN, Sallahuddin MİR, Abdul AHAD, Muhammad Alam Zaıb KHAN, and Muhammad FAIQ. "Development and performance analysis of hybrid photovoltaic/thermal (PV/T) system." Journal of Thermal Engineering 7, no. 14 (December 30, 2021): 1936–44. http://dx.doi.org/10.18186/thermal.1051272.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Karakurt, A. Sinan. "PERFORMANCE ANALYSIS OF A STEAM TURBINE POWER PLANT AT PART LOAD CONDITIONS." Journal of Thermal Engineering 3, no. 2 (April 1, 2017): 1121. http://dx.doi.org/10.18186/thermal.298611.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Gandhidasan, P., and K. N. Ramamurthy. "Thermal performance analysis of pneumatic structures." Energy 13, no. 5 (May 1988): 413–19. http://dx.doi.org/10.1016/0360-5442(88)90065-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Shukla, K. N., A. Pradeep, and S. S. Suneesh. "Thermal performance analysis of silica tiles." Journal of Engineering Physics and Thermophysics 79, no. 6 (November 2006): 1157–63. http://dx.doi.org/10.1007/s10891-006-0218-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

TAKANO, Chihiro, Yusuke MURAKI, Tsuyoshi TOTANI, Harunori NAGATA, and Isao KUDO. "3329 Thermal Analysis and Performance Characteristics on Solar Thermal Thruster." Proceedings of the JSME annual meeting 2005.5 (2005): 385–86. http://dx.doi.org/10.1299/jsmemecjo.2005.5.0_385.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

P., Ram Kumar. "Thermal Performance Analysis of Cylindrical Heat Pipes Induced in a Shell Assisted Heat Exchanger." Journal of Advanced Research in Dynamical and Control Systems 12, SP4 (March 31, 2020): 618–35. http://dx.doi.org/10.5373/jardcs/v12sp4/20201528.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

M, Halafawi. "Offset Wells Data Analysis and Thermal Simulations Improve the Performance of Drilling HPHT Well." Petroleum & Petrochemical Engineering Journal 6, no. 1 (2022): 1–15. http://dx.doi.org/10.23880/ppej-16000298.

Full text

Abstract:

To drill new HPHT development wells safely, an exact estimate of their stability is essential. Analyzing previously drilled offset wells can assist in this determination, eliminating any stratigraphic column issues and saving nonproductive time. The challenges found with offset wellbores, their consequences on well design, possible remedies, and preventative measures are discussed in this paper. It examines drilling data from offset wells in order to discover, diagnose, and treat serious issues. Furthermore, thermal simulation was done in order to study the temperature distribution of the wellbore, annuli and fluids during drilling, tripping, circulation, logging, casing and cementing in HPHT zone.

APA, Harvard, Vancouver, ISO, and other styles

11

Jain, Nikhil, Vishal Garg, and Jyotirmay Mathur. "Thermal performance analysis of solar clothes dryer." Journal of Renewable and Sustainable Energy 5, no. 4 (July 2013): 043113. http://dx.doi.org/10.1063/1.4816498.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Sopian, K., K. S. Yigit, H. T. Liu, S. Kakaç, and T. N. Veziroglu. "Performance analysis of photovoltaic thermal air heaters." Energy Conversion and Management 37, no. 11 (November 1996): 1657–70. http://dx.doi.org/10.1016/0196-8904(96)00010-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Bhangu, Navneet Singh, Rupinder Singh, and G. L. Pahuja. "Availability Performance Analysis of Thermal Power Plants." Journal of The Institution of Engineers (India): Series C 100, no. 3 (March 15, 2018): 439–48. http://dx.doi.org/10.1007/s40032-018-0450-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Zhuang, Zhi, Yuguo Li, and Bin Chen. "Thermal storage performance analysis on Chinese kangs." Energy and Buildings 41, no. 4 (April 2009): 452–59. http://dx.doi.org/10.1016/j.enbuild.2008.11.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Han, Yuanyuan, Hong Guo, Ximin Zhang, Fazhang Yin, Ke Chu, and Yeming Fan. "Thermal performance analysis of LED with multichips." Journal of Wuhan University of Technology-Mater. Sci. Ed. 26, no. 6 (December 2011): 1089–92. http://dx.doi.org/10.1007/s11595-011-0368-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

S, Nagarajan, and Prem kumar M. "Analysis of Thermal Performance in Solar Dryer." IOSR Journal of Mechanical and Civil Engineering 11, no. 3 (2014): 71–74. http://dx.doi.org/10.9790/1684-11327174.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Anand Kishorbhai Patel. "Thermal performance analysis conical solar water heater." World Journal of Advanced Engineering Technology and Sciences 9, no. 2 (August 30, 2023): 276–83. http://dx.doi.org/10.30574/wjaets.2023.9.2.0228.

Full text

Abstract:

Solar radiation is harnessed as an alternative energy source for numerous industrial and domestic applications. Currently, apart from space heating, air-conditioning and lightning, solar water heating (SWH) systems have a widespread usage and applications in both domestic and industrial sectors. The major issue with solar energy is that the transmission efficiency is low and so heat transfer augmentation methods can be used to improve thermal performance of solar water heater and the aim of present work is to developed conical solar water heater with objective is to obtain good water outlet temperature from compact solar water heater.

APA, Harvard, Vancouver, ISO, and other styles

18

Heggs, P. J., and E. A. Foumeny. "THERMAL PERFORMANCE OF DIABATIC CYCLIC REGENERATORS." Numerical Heat Transfer, Part A: Applications 9, no. 2 (February 1, 1986): 183–99. http://dx.doi.org/10.1080/10407788608913472.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Lin, Xueyan. "Thermal performance analysis of electric vehicle charging connectors." Thermal Science, no. 00 (2020): 313. http://dx.doi.org/10.2298/tsci200609313l.

Full text

Abstract:

In order to obtain the thermal characteristics of the electric vehicle connector in operation. Firstly, the thermal circuit diagram of the connector is obtained by using thermoelectric simulation method. Then, based on Newton's cooling equation, the natural convection heat transfer coefficient of the connector is calculated, which provides accurate input parameters for thermal simulation calculation. Finally, the thermal performance of the connector and the influence of component size and material are analyzed based on ANSYS software. When the working current is 250A and the ambient temperature is 25?C, the temperature rise of connector shell and conductor can meet the thermal performance requirement. In order to reduce the temperature and uniform temperature difference of each part of the connector, the following optimization schemes are put forward: the optimal length of the insulator is 44mm; the shell length should be increased as far as possible if conditions permit; LCP with high thermal conductivity is selected as the insulator material; aluminum alloy with high thermal conductivity and blackness is selected as the shell material.

APA, Harvard, Vancouver, ISO, and other styles

20

XUYI, Zhao, Wang FUQIANG, Shi XUHANG, Cheng ZIMING, and Gong XIANGTAO. "Analysis of heat transfer performance of the absorber tube with convergent-divergent structure for parabolic trough collector." Journal of Thermal Engineering 7, no. 14 (December 30, 2021): 1843–56. http://dx.doi.org/10.18186/thermal.1051232.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Wang, Quannan. "Thermal insulation performance analysis of high rise building envelope based on finite element analysis." Thermal Science 26, no. 3 Part A (2022): 2361–72. http://dx.doi.org/10.2298/tsci2203361w.

Full text

Abstract:

The current analysis method of thermal insulation performance of building envelope neglects the optimization of temperature control parameters, which leads to poor thermal insulation performance, low thermal insulation rate and weak convincing results. Therefore, a finite element analysis method for the thermal insulation performance of high rise building envelope is proposed. Compton backscattering technique is introduced to analyze the influence of the scattering intensity and the ratio of window width on the heat transfer coefficient of the enclosure. Based on the objective function, the thermal performance parameters of retaining wall are calculated and fused. An adaptive iterative optimization method is used to control the thermal performance of the enclosure using the thermal performance parameters of the enclosure. Through the Compton backscatter detection technology, the decision variables of energy consumption of the thermal insulation materials are obtained, and the temperature control parameters of the walls are optimized. The finite element model of enclosure structure is established by using finite element software. The results of finite element model experiments show that the proposed method has ideal heat preservation rate and energy consumption. Compared with the traditional method, the proposed method can keep the preset temperature.

APA, Harvard, Vancouver, ISO, and other styles

22

Shankar, Gade Bhavani, and P. S. Kishore. "PERFORMANCE ANALYSIS OF A CONVENTIONAL AIR HEATER." International Journal of Research -GRANTHAALAYAH 5, no. 4 (April 30, 2017): 320–33. http://dx.doi.org/10.29121/granthaalayah.v5.i4.2017.1826.

Full text

Abstract:

Solar energy constitutes one of the main alternatives for facing the energy problems of the future. Solar air heaters are used for applications at low and moderate temperatures. Such as crop drying, timber seasoning, space heating, and drying agriculture products. Artificial geometry applied on the absorber plate is the very efficient method to improve thermal performance of solar air heaters. The thermal efficiency of solar air heaters is generally poor due to low heat transfer coefficient between the absorber plate and air flowing in the collector. Thermal performance of the conventional solar air heater was studied under varying solar and ambient conditions in different months. At day time the solar heating system stored the thermal solar energy as sensible and latent heat. A parametric study was done for 10 months for the climatic conditions of Visakhapatnam. The effect of change in the tilt angle, length and breadth of a collector and mass flow rate on the temperature of collector has been studied. The length of the collector is 2.1m and width of the collector is 1.1 m. the performance analysis of system shows potential of improving the thermal efficiency range is 31% to 47% .From the obtained results, graphs are drawn to assess the performance analysis of a conventional air heater.

APA, Harvard, Vancouver, ISO, and other styles

23

Fang, Wen Bo. "Performance Analysis of Solar Evacuated Tube Collector." Advanced Materials Research 712-715 (June 2013): 1605–8. http://dx.doi.org/10.4028/www.scientific.net/amr.712-715.1605.

Full text

Abstract:

The high temperature operation of Evacuated Tube Collectors (ETC) and their very low radiant heat losses make them ideal for solar water heating, solar space heating, desiccant air conditioning, thermal driven cooling and industrial process heating applications. The work temperature of common ETC can reach 100~ 250°C. The vacuum tube envelope minimizes heat loss and ensures high collector durability and steady performance. This paper investigates different types of solar thermal collectors and compared them so that the result which the heat loss of ETC is least is obtained. The thermal analysis and performance of ETC are investigated as well.

APA, Harvard, Vancouver, ISO, and other styles

24

Jurigova, Martina, Maria Minarova, and Ivan Chmúrny. "Analysis of Thermal Performance of Energy Storage System." Applied Mechanics and Materials 824 (January 2016): 371–78. http://dx.doi.org/10.4028/www.scientific.net/amm.824.371.

Full text

Abstract:

Thermal energy is necessary of many reasons. The most basic and most obvious includes food preparation and delivery of heat. Thermal energy storage is actually a temporary storage at high temperatures, respectively at low temperatures. It is an advanced technology, which can reduce environmental impact and it can facilitate more efficient and cleaner energy system. Nowadays, these systems have ability to retain thermal energy for a period of three months or more. The aim of design of these systems is to keep the thermal energy in summer period and to use it for heating in winter period. The role of such storage systems is to accumulate the heat, to balance temperature differences and to achieve the most effective use of the collected energy. This paper is focused on thermal analysis of system, which contains concrete tank. It is a system with water as a storage medium and the cooling of the water was monitored for 30 days.

APA, Harvard, Vancouver, ISO, and other styles

25

Djamila, Harimi. "Analysis of Building Materials for Indoor Thermal Performance and Thermal Comfort." Advanced Materials Research 845 (December 2013): 472–76. http://dx.doi.org/10.4028/www.scientific.net/amr.845.472.

Full text

Abstract:

In recent years, there has been an increasing interest on energy saving in building sector.Passive cooling is considered the best strategy for improving the indoor thermal conditions and comfortwith lowest cost energy usage. In air-conditioned era, however, many designers have fully forgotten that the main objective of building thermal comfort is not to cool the whole space but rather the resident of the building with the least energy consumption. This investigation is about discussing some of the available passive cooling strategies based on experimental investigations. Results from this study showed that building materialsaffect the indoorair temperature, which in turn willaffect the indoor thermal comfort. Design strategies more suitable under tropical humid climatic conditions were suggested.

APA, Harvard, Vancouver, ISO, and other styles

26

Pokorny, Nikola, and Tomas Matuska. "Performance analysis of glazed PVT collectors for multifamily building." E3S Web of Conferences 172 (2020): 12003. http://dx.doi.org/10.1051/e3sconf/202017212003.

Full text

Abstract:

The paper deals with performance analysis of potential application of glazed photovoltaic-thermal collector for domestic hot water preparation for multifamily building in European climatic conditions. Two different solutions are studied, glazed photovoltaic-thermal collectors integrated in the building envelope and glazed photovoltaic-thermal collectors fixed on the roof of the building. Moreover, the paper presents a comparison with conventional side by side installation of solar thermal collectors and photovoltaic panels to show the benefit of photovoltaic-thermal collectors. Simulation analysis has been done in TRNSYS with use of developed and validated mathematical model of glazed photovoltaic-thermal collector.

APA, Harvard, Vancouver, ISO, and other styles

27

Bezerra Batista, Pedro Igor, Joaquin Humberto Aquino Rocha, and Yêda Vieira Póvoas. "Parameters of thermal performance of plaster blocks: Experimental analysis." Materiales de Construcción 73, no. 350 (May 24, 2023): e314. http://dx.doi.org/10.3989/mc.2023.299322.

Full text

Abstract:

This work aims to obtain parameters of thermal performance of various types of plaster blocks for vertical sealing. The methodology consisted of making test elements with 8 types of plaster blocks, in addition to plasterboard of different densities. Thermal resistance, transmittance, capacity, and delay were calculated, according to the Brazilian standard NBR 15220. Thermal behavior tests were carried out with controlled heating through a heat source, digital thermometer, infrared thermography, and an instrumented thermal chamber developed for this work. The experimental results corroborated with the trend indicated by the calculated parameters. The massive and hollow blocks of 100 mm had the best results followed by the 76 mm hollow blocks. The 50- and 70-mm massive blocks were among those with the worst thermal behavior. The study through the thermal chamber and real test elements associated with the normative methods allowed the practical verification regarding the thermal behavior of the components.

APA, Harvard, Vancouver, ISO, and other styles

28

Cao, Rui. "Performance Characteristics Analysis of Supercritical Boiler Water Wall." Advanced Materials Research 328-330 (September 2011): 2248–51. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.2248.

Full text

Abstract:

The key technology of supercritical boiler is water wall, this paper is mainly analyzed the dangerous working conditions of supercritical boiler water wall. On the one hand, from working substance’s point of view, we adopt traditional pressure drop method to judge the heat transfer deterioration position under sub-critical pressure; on the other hand, we use temperature test point combining calculation formula of wall temperature to judge the heat transfer deterioration position under supercritical pressure, and combining improved zoned thermal calculation method to get wall surface thermal load distribution map. Through an instance calculation, when boiler unit under 40% of full load, the maximum thermal load is near 20 meters of furnace height and when it under 100% full loads, the maximum thermal load is near 30 meters of furnace height. So we can control all kinds of heat transfer deterioration position through changing hydrodynamic condition and ward off the highest thermal load area, which is significant to operation.

APA, Harvard, Vancouver, ISO, and other styles

29

Chen, Jian, Gui Cheng Wang, Wei Song, and Gang Liu. "The Heat Performance Analysis of HSK Shrink Toolholder." Materials Science Forum 723 (June 2012): 275–79. http://dx.doi.org/10.4028/www.scientific.net/msf.723.275.

Full text

Abstract:

The principle of the HSK shrink toolholder is expanding with heat and contracting with cold. The heat performance of HSK is analyzed. Firstly, the induction heating performance is studied by using electromagnetism-thermal-structure FEA in ANSYS software and experiment, the optimal temperature of HSK shrink toolholder is got. Secondly, thermal fatigue and calculation of the fatigue life is analyzed by using thermal-stress in ANSYS software and Coffin-Manson formula. The loads applied on the FEA model are temperature during the cycle of heating and cooling.

APA, Harvard, Vancouver, ISO, and other styles

30

Buday, Peter, Rastislav Ingeli, and Miroslav Čekon. "Advanced Thermal Performance Analysis of Thermal Break Element Applied in Balcony Slab." Advanced Materials Research 1041 (October 2014): 167–70. http://dx.doi.org/10.4028/www.scientific.net/amr.1041.167.

Full text

Abstract:

Thermal performance of any building component is the result not only of its thermophysical properties but also of a way of final installation and connections altogether of their all elements. In addition, thermal leakage and bridging in buildings can eventually contribute to a multitude of problems. The thermal bridge is the place in the building envelope through which heat transfer has a multi-dimensional nature. That is why in recent studies, the issue of heat transfer phenomena in the building components is considered as a multi-dimensional more frequently. One of the specific details that create thermal leakage is located in balcony slabs. This paper is focused on detailed analysis of thermal performance of thermal break element applied in balcony slab with relation to the thermal aspects of wall building envelope. Particular cases of commonly used balcony systems in buildings are observed related to multi-dimensional and parametric approach of modeling. As result of analyzed thermal aspects, such as importance of building envelope type and its thermal performance, variations of thermal properties, are presented as study findings that affected thermal bridges magnitude and resultant thermal performance of balcony slab detail.

APA, Harvard, Vancouver, ISO, and other styles

31

LET, ANDREEA-MIHAELA, VIVIANA FILIP, IOAN ALIN BUCURICA, SIMONA MIHAI, and DORIN DACIAN LET. "APPLIED THERMODYNAMIC ANALYSIS IN SOLAR THERMAL SYSTEMS PERFORMANCE ASSESSMENT." Journal of Science and Arts 24, no. 2 (June 30, 2024): 435–46. http://dx.doi.org/10.46939/j.sci.arts-24.2-c01.

Full text

Abstract:

This paper presents the results of thermodynamic analysis applied to flat plate solar panels, incorporating both simulation studies and real system measurements in comparison. As solar thermal panels play a crucial role in sustainable energy solutions, analysis is essential for providing a detailed and accurate performance assessment. Thermodynamic tools like energy and exergy analyses can be used to evaluate and enhance the performance of solar thermal generation systems. Their usage can help identify the components and processes with the greatest potential for improvement, mainly in the design or exploitation phase. Exergetic analysis, in particular, reveals the true extent of losses, as demonstrated by energy and exergy analyses of various thermal power plants with different capacities. Exergy analysis provides a more accurate performance evaluation and is a valuable method for assessing and comparing potential configurations of these systems.

APA, Harvard, Vancouver, ISO, and other styles

32

Marc-Alain Mutombo, N., Freddie Inambao, and Glen Bright. "Performance analysis of thermosyphon hybrid photovoltaic thermal collector." Journal of Energy in Southern Africa 27, no. 1 (March 23, 2016): 28. http://dx.doi.org/10.17159/2413-3051/2016/v27i1a1564.

Full text

Abstract:

The conversion of solar irradiance into electricity by a photovoltaic module (PV) is 6– 7% of the incoming energy from the sun depending on the type of technology and the environmental parameters. More than 80% of incoming energy from the sun is reflected or absorbed by the solar module. The fraction of energy absorbed increases with solar cell temperature and the cells’ efficiency drops as a consequence. The efficiency of a PV module is improved by combining a PV module and a thermal collector in one unit, resulting in a hybrid photovoltaic and thermal collector (PV/T). The purpose of this paper is to present the behavior a thermosyphon hybrid PV/T when exposed to variations of environmental parameters and to demonstrate the advantage of cooling photovoltaic modules with water using a rectangular channel profile for the thermal collector. A single glazed flat-box absorber PV/T module was designed, its behavior for different environmental parameters tested, the numerical model developed, and the simulation for particular days for Durban weather run. The simulation result showed that the overall efficiency of the PV/T module was 38.7% against 14.6% for a standard PV module while the water temperature in the storage tank reached 37.1 °C. This is a great encouragement to the marketing of the PV/T technology in South Africa particularly during summer, and specifically in areas where the average annual solar irradiance is more than 4.70 kWh/m²/day.

APA, Harvard, Vancouver, ISO, and other styles

33

Nguyen, Ngoc-Vi, and Dong-Wook Oh. "Analysis of thermal performance of polymer rotary regenerator." High Temperatures-High Pressures 48, no. 1-2 (2019): 107. http://dx.doi.org/10.32908/hthp.v48.703.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Hisada, Takashi, and Yasuharu Yamada. "Computational Analysis on Thermal Performance of 2.5D Package." Transactions of The Japan Institute of Electronics Packaging 7, no. 1 (2014): 114–22. http://dx.doi.org/10.5104/jiepeng.7.114.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Radha, Chro Hama, and Istvan Kistelegdi. "Thermal performance analysis of Sabunkaran residential building typology." Pollack Periodica 12, no. 2 (August 2017): 151–62. http://dx.doi.org/10.1556/606.2017.12.2.13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Choi, Bongkeun. "Thermal Performance of Disc Brake and CFD Analysis." SAE International Journal of Passenger Cars - Mechanical Systems 7, no. 4 (September 28, 2014): 1304–10. http://dx.doi.org/10.4271/2014-01-2497.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Bi-chao, YE, and Hao Zhou. "Thermal Performance Analysis of Concrete Small Hollow Block." IOP Conference Series: Materials Science and Engineering 556 (August 19, 2019): 012041. http://dx.doi.org/10.1088/1757-899x/556/1/012041.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Ross, Jennifer M., James L. Szalma, and Peter A. Hancock. "A Meta-Analysis of Performance under Thermal Stress." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 50, no. 17 (October 2006): 1736–40. http://dx.doi.org/10.1177/154193120605001703.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Fakhim, B., N. Srinarayana, M. Behnia, and S. W. Armfield. "Thermal Performance of Data Centers-Rack Level Analysis." IEEE Transactions on Components, Packaging and Manufacturing Technology 3, no. 5 (May 2013): 792–99. http://dx.doi.org/10.1109/tcpmt.2013.2248195.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Yuan, Zhimin, and Bo Liu. "Anti-thermal asperity head: design and performance analysis." Journal of Magnetism and Magnetic Materials 209, no. 1-3 (February 2000): 166–68. http://dx.doi.org/10.1016/s0304-8853(99)00677-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Fleuchaus, Paul, Simon Schüppler, Bas Godschalk, Guido Bakema, and Philipp Blum. "Performance analysis of Aquifer Thermal Energy Storage (ATES)." Renewable Energy 146 (February 2020): 1536–48. http://dx.doi.org/10.1016/j.renene.2019.07.030.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Fudholi, Ahmad, Kamaruzzaman Sopian, Mohammad H. Yazdi, Mohd Hafidz Ruslan, Adnan Ibrahim, and Hussein A. Kazem. "Performance analysis of photovoltaic thermal (PVT) water collectors." Energy Conversion and Management 78 (February 2014): 641–51. http://dx.doi.org/10.1016/j.enconman.2013.11.017.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Gultekin, Ahmet, Murat Aydin, and Altug Sisman. "Thermal performance analysis of multiple borehole heat exchangers." Energy Conversion and Management 122 (August 2016): 544–51. http://dx.doi.org/10.1016/j.enconman.2016.05.086.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Bataineh, Khaled M., and Nadia Fayez. "Analysis of thermal performance of building attached sunspace." Energy and Buildings 43, no. 8 (August 2011): 1863–68. http://dx.doi.org/10.1016/j.enbuild.2011.03.030.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Wen, Li Zhe, and Yuan Sheng Huang. "Comparable Analysis on the Thermal Performance of Prepreg." Materials Science Forum 984 (April 2020): 144–49. http://dx.doi.org/10.4028/www.scientific.net/msf.984.144.

Full text

Abstract:

Both differential scanning calorimetry (DSC) and differential thermal analysis (DTA) were employed to analyze the thermal performance of the prepreg made by different companies. The results were shown that glass transition temperature (Tg), conversion rate and residual amount of carbon had a large difference. Tg ranged from 130.10 °C to 198.99 °C. After heat-treating from 20°C to 230°C for 23minutes, conversion rate ranged from 19.47% to 100%. After heating from 20°C to 500°C, residual amount of carbon had a range from 13.149% to 39.834%. Tg was not directly proportional to residual amount of carbon. When the residual amount of carbon was more than 30%, Tg would be more than 150°C. It was indicated Tg was relevant to carbon content of resin and inorganic fillers.

APA, Harvard, Vancouver, ISO, and other styles

46

Radziemska, Ewa. "Performance Analysis of a Photovoltaic-Thermal Integrated System." International Journal of Photoenergy 2009 (2009): 1–6. http://dx.doi.org/10.1155/2009/732093.

Full text

Abstract:

The present commercial photovoltaic solar cells (PV) converts solar energy into electricity with a relatively low efficiency, less than 20%. More than 80% of the absorbed solar energy is dumped to the surroundings again after photovoltaic conversion. Hybrid PV/T systems consist of PV modules coupled with the heat extraction devices. The PV/T collectors generate electric power and heat simultaneously. Stabilizing temperature of photovoltaic modules at low level is higly desirable to obtain efficiency increase. The total efficiency of 60–80% can be achieved with the whole PV/T system provided that the T system is operated near ambient temperature. The value of the low-T heat energy is typically much smaller than the value of the PV electricity. The PV/T systems can exist in many designs, but the most common models are with the use of water or air as a working fuid. Efficiency is the most valuable parameter for the economic analysis. It has substantial meaning in the case of installations with great nominal power, as air-cooled Building Integrated Photovoltaic Systems (BIPV). In this paper the performance analysis of a hybrid PV/T system is presented: an energetic analysis as well as an exergetic analysis. Exergy is always destroyed when a process involves a temperature change. This destruction is proportional to the entropy increase of the system together with its surroundings—the destroyed exergy has been called anergy. Exergy analysis identifies the location, the magnitude, and the sources of thermodynamic inefficiences in a system. This information, which cannot be provided by other means (e.g., an energy analysis), is very useful for the improvement and cost-effictiveness of the system. Calculations were carried out for the tested water-cooled ASE-100-DGL-SM Solarwatt module.

APA, Harvard, Vancouver, ISO, and other styles

47

Mohanty, Chinmaya P., Siba Sankar Mahapatra, and Jambeswar Sahu. "A thermal-structural model for process performance analysis." International Journal of Productivity and Quality Management 16, no. 3 (2015): 347. http://dx.doi.org/10.1504/ijpqm.2015.071519.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Mahbubul, I. M., A. Saadah, R. Saidur, M. A. Khairul, and A. Kamyar. "Thermal performance analysis of Al2O3/R-134a nanorefrigerant." International Journal of Heat and Mass Transfer 85 (June 2015): 1034–40. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2015.02.038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Liu, Xiangdong, and Yongping Chen. "Transient thermal performance analysis of micro heat pipes." Applied Thermal Engineering 58, no. 1-2 (September 2013): 585–93. http://dx.doi.org/10.1016/j.applthermaleng.2013.04.025.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Oliveira, Raquel Diniz, Roberta Vieira Gonçalves de Souza, Ana Júlia Maia Mairink, Magno Tadeu Gomes Rizzi, and Roberto Márcio da Silva. "Concrete Walls Thermal Performance Analysis by Brazilian Standards." Energy Procedia 78 (November 2015): 213–18. http://dx.doi.org/10.1016/j.egypro.2015.11.383.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!