Relevant bibliographies by topics / Test fluid

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Test fluid'

Author: Grafiati
Published: 29 June 2021
Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Test fluid.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Test fluid"

1

Tkáč, Z., R. Majdan, Š. Drabant, J. Jablonický, R. Abrahám, and P. Cvíčela. "The accelerated laboratory test of biodegradable fluid type “ertto”." Research in Agricultural Engineering 56, No. 1 (March 13, 2010): 18–25. http://dx.doi.org/10.17221/26/2009-rae.

Full text
Abstract:
The accelerated laboratory tests can evaluate the properties of new biodegradable fluids under relatively short time. These test results are the ground for the continuity of the tests under operation conditions in machine. The paper presents the test of new biodegradable hydraulic fluid type “Environmentally responsible tractor transmission oil” by designed special test device. The test evaluation was realized by technical state of concrete hydrostatic pump UD 25 which is used in tractors Zetor Forterra. This pump was loaded by cyclic pressure loading during the test with tested fluid. The evaluated parameter was flow efficiency of hydrostatic pump which reached the value 7.3% after the test. The reached value hints a high quality of the tested fluid (the limit value per standard is the flow efficiency decrease – 20%).
APA, Harvard, Vancouver, ISO, and other styles
2

Zhao, Dong Mei, and Xue Peng Liu. "Magnetorheological Fluid Test and Application." Advanced Materials Research 396-398 (November 2011): 2158–61. http://dx.doi.org/10.4028/www.scientific.net/amr.396-398.2158.

Full text
Abstract:
Magnetorheological fluid is a kind of new intelligent materials, because of its good controllable and mechanical properties; therefore it can be widely used in aerospace, mechanical engineering and automotive engineering, precision processing engineering, control engineering and engineering field. This paper introduces magnetorheological fluid mechanics model of MRF, temperature static shear yield stress, and the influence of MRF static shear yield stress test, introduces magnetorheological fluid in the application of variable hardness collar. The application tendency of the magnetic fluid flow is pointed out
APA, Harvard, Vancouver, ISO, and other styles
3

Peng, Hai, and Dan He. "Cutting Test and Analysis of the Emulsified Deep-Hole Cutting Fluid." Advanced Materials Research 189-193 (February 2011): 3066–70. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.3066.

Full text
Abstract:
This paper depicts the types and functions of cutting fluid, compared functions, advantages and disadvantages with several other cutting fluids. According to the characteristics of BTA deep-hole machining and cutting fluid requirements, some of cutting fluids were chose to do the drilling test. In order to satisfy the lubrication and cooling effect of the cutter, the oil-in-water type cutting fluid which through a comparative analysis of the experiment was used in the deep-hole machining, in the meanwhile, it can reduce the economic costs and environmental pollution.
APA, Harvard, Vancouver, ISO, and other styles
4

Juraj, Tulík, Hujo Ľubomir, Kosiba Jan, Jablonický Juraj, and Jánošová Michela. "Evaluation of new biodegradable fluid on the basis of accelerated durability test, FTIR and ICP spectroscopy." Research in Agricultural Engineering 63, No. 1 (March 28, 2017): 1–9. http://dx.doi.org/10.17221/6/2015-rae.

Full text
Abstract:
The paper deals with the properties of newly developed synthetic biodegradable fluid in terms of its operational and physico-chemical properties. The evaluated fluid is a new biodegradable fluid MOL Farm UTTO Synt, which belongs to the group of universal gear-hydraulic fluids. At the beginning, the fluid was subjected to accelerated durability test under laboratory conditions, with monitoring its impact on technical conditions of the used hydraulic pump UD 25. After that, the FTIR spectroscopy analysis was performed, with monitoring thermal oxidation, oxidation by acid products, water content and additives depletion. Depletion of additives was also monitored by the ICP spectroscopy. Based on these results, it can be stated that the newly developed fluid has good operational and physico-chemical properties after the durability test and is suitable for further testing under operational conditions without a risk of damaging agricultural machines.
APA, Harvard, Vancouver, ISO, and other styles
5

Matuszewski, Leszek. "Multi-stage magnetic-fluid seals for operating in water – life test procedure, test stand and research results." Polish Maritime Research 20, no. 1 (January 1, 2013): 39–47. http://dx.doi.org/10.2478/pomr-2013-0005.

Full text
Abstract:
AbstractThe edge criteria for magnetic-fluid seals durability research were described in previous article [24] and now the tests results are presented. The tests were made with three magnetic fluids using various magnets quantity in magnetic assemblies. If values obtained in the repeated test deviated by more than 10 % from results of the first test an additional control test was made for final characteristics. The characteristics are: critical pressure, critical motion velocity and working life of the seal. The test stands were prepared for particular seals dimensions and results of tests are presented in the form of tables, cross section draws and diagrams. In conclusion one can see that multi-stage magnetic-fluid seals could be efficiently used in water for rotating shaft seals in a limited range of motion velocity and cycles quantity. Nevertheless a particular applications can be provided by magnetic-fluid seals only.
APA, Harvard, Vancouver, ISO, and other styles
6

ZHOU, SHIQI. "EXTENDING SIMPLE WEIGHTED DENSITY APPROXIMATION FOR HARD SPHERE FLUID TO LENNARD–JONES FLUID (I): TEST." International Journal of Modern Physics B 19, no. 32 (December 30, 2005): 4701–21. http://dx.doi.org/10.1142/s0217979205033078.

Full text
Abstract:
A theoretical formalism which can be combined with any hard sphere density functional approximations (DFA) to construct DFA for non-hard sphere fluids with a hard or soft core subjected to diverse external potentials is proposed. To show validity and power of the present formalism, we employ a simple weighted density approximation as an illustrating example. It is found that the resultant DFA for Lennard–Jones fluid under influences of diverse extenal potentials is in generally satisfactory agreement with corresponding simulational results even though the co-existence bulk fluid in the particle reservoir with which the non-uniform fluid under consideration is connected, is situated at "dangerous" regions. The significance of the present formalism lies in that it can be combined with any other hard sphere DFAs to construct DFAs for any non-hard sphere fluids with a hard or soft core.
APA, Harvard, Vancouver, ISO, and other styles
7

Ulicny, John C., Michael P. Balogh, Noel M. Potter, and Richard A. Waldo. "Magnetorheological fluid durability test—Iron analysis." Materials Science and Engineering: A 443, no. 1-2 (January 2007): 16–24. http://dx.doi.org/10.1016/j.msea.2006.06.050.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ulicny, John C., Charlene A. Hayden, Patrick M. Hanley, and Deborah F. Eckel. "Magnetorheological fluid durability test—Organics analysis." Materials Science and Engineering: A 464, no. 1-2 (August 2007): 269–73. http://dx.doi.org/10.1016/j.msea.2007.01.059.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Baguley, S. D. K., P. J. Horner, P. A. C. Maple, and L. Stephenson. "An oral fluid test for syphilis." International Journal of STD & AIDS 16, no. 4 (April 1, 2005): 299–301. http://dx.doi.org/10.1258/0956462053654302.

Full text
Abstract:
We have developed a time-resolved fluorescence immunoassay to detect antibodies to Treponema pallidum recombinant antigens in oral fluid specimens. Using an 'Oracol' swab, oral fluid was collected from 34 subjects with a serological diagnosis of syphilis and 97 seronegative controls. Using a cut-off of three standard deviations over control mean, the sensitivity and specificity of the assay in all subjects with positive syphilis serology was 76.5% and 97.9%, respectively. In those with early syphilis, the sensitivity and specificity of the assay was 100% and 97.9%. In a non-outbreak situation, screening clinic attendees for syphilis using oral fluid specimens is potentially useful when collection of blood is not practicable. In addition, it may have much to offer in outreach projects and epidemiological investigations.
APA, Harvard, Vancouver, ISO, and other styles
10

Parodi, Maurizio Battaglia, and Daniele D. Giusto. "Ocular Fluid Ferning Test and Fractals." Ophthalmic Research 25, no. 5 (1993): 307–13. http://dx.doi.org/10.1159/000267330.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Test fluid"

1

Vongvuthipornchai, Somporn. "Well test analysis for non-Newtonian fluid flow /." Access abstract and link to full text, 1985. http://0-wwwlib.umi.com.library.utulsa.edu/dissertations/fullcit/8603796.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nordstrand, Dennis. "Test-enhanced learning, working memory and fluid intelligence." Thesis, Umeå universitet, Institutionen för psykologi, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-122471.

Full text
Abstract:
Under det senaste decenniet har testbaserat lärande väl etablerats som ett effektivt sätt att främja hållbar inlärning. Många sorters material och omständigheter har utforskats i relation till denna metod. Endast nyligen har dock individuella skillnader i relation till testbaserat lärande fått uppmärksamhet som ett forskningsområde. Ett område hittills förhållandevis outforskat är relationen mellan individuella skillnader i kognitiv kapacitet och inlärningsprocessen med återhämtning som inlärningsmetod. Denna studie hade för avsikt att utforska denna relation genom att mäta generell flytande intelligens och arbetsminneskapacitet för ett urval av gymnasieelever (n = 189, M = 16.89 år gamla) som använde testbaserat lärande som inlärningsmetod. Resultaten indikerar att arbetsminne och flytande intelligens båda är relaterade till inlärningsprocessen, men att det förstnämnda är så till en signifikant högre grad än det sistnämnda.
During the last decade, test-enhanced learning has been thoroughly cemented as an efficient way to promote durable learning. Many materials and conditions have been explored in relation to this method. Only recently, however, have individual differences in relation to test-enhanced learning received attention as an area of study. An area as of yet relatively unexplored is the relationship between differences in cognitive ability and the process of retrieval as a method of learning. The present study set out to explore this relationship by measuring general fluid intelligence and working memory capacity in a sample of upper secondary level students (n = 189, M = 16.89 years of age) who used a test-enhanced learning method. The results indicate that working memory and fluid intelligence are both related to this learning process, however the former to a significantly higher degree than the latter
APA, Harvard, Vancouver, ISO, and other styles
3

Nyekwe, Ichegbo Maxwell. "Investigation of factors effecting yield stress determinations using the slump test." Thesis, Cape Peninsula University of Technology, 2008. http://hdl.handle.net/20.500.11838/2160.

Full text
Abstract:
Thesis (MTech (Chemical Engineering))--Cape Peninsula University of Technology, 2008.
Certain non-Newtonian fluids exhibit a yield stress which can be measured with a variety of instruments varying from very sophisticated rotary and tube viscometers to hand-held slump cones and cylinders of various sizes. Accurate yield stress measurement is significant for process design and disposal operations for thickenend tailings. The slump value was first related to the yield stress by Murata (1984). Later, that work was corrected by Christensen (1991) for an error in the mathematical analysis. Slump, based on a circular cylindrical geometry was first investigated by Chandler (1986). These concepts led to the study by Pashias et al., (1996) that formed the basis for the current research. The Flow Process Research Centre (FPRC) at the Cape Peninsula University of Technology developed a slump meter designed to lift the cone or cylinder vertically at controlled lifting speeds. In addition the simple hand-held cylinder which is an adaptation of slump cones which were originally developed by the concrete industry to determine the flowability of fresh concrete was also used. The vane technique was used as a control. Cones and cylinders made of stainless steel and PVC were fitted to the slump meter. The yield stresses of four non-Newtonian fluids at different concentrations were tested in four different configurations at different lift speeds to ascertain whether the measuring position, lift speed, slip, geometry, wall surface material, and stability has an effect on the value of yield stress measured. The effect of different predictive models was also ascertained.The cylinder, lump and cone models relating slump to yield stress was used in the dimensional analysis of the results. The objective of this work was to determine if the slump tests (cone, cylinder and the hand-held cylinder) would generate yield stress values comparable to those found using the vane technique. It was establised that there was no significant effect of lift speed, stability, geometry and wall surface material on the value of yield stress. The effect of measuring position on the value of yield stress calculated gave a difference of 25%. Using dimensional analysis, the lump model (Hallbom, 2005) more accurately predicts the material yield stress when using the hand-held cylinder as well as all the cone results (due to its specific geometry), and cylinder configurations, thus affirming the work of Clayton et al., 2003. It is concluded that, although the materials and concentrations tested induced errors within 40%, the hand-held cylinder shows promise as a reliable, quick and simple way of measuring the yield stress.
APA, Harvard, Vancouver, ISO, and other styles
4

Gilmore, Jordan David. "Computational Fluid Dynamics Analysis of Jet Engine Test Facilities." Thesis, University of Canterbury. Mechanical Engineering, 2012. http://hdl.handle.net/10092/7238.

Full text
Abstract:
This thesis investigates the application of CFD techniques to the aerodynamic analysis of a U-shaped JETC. Investigations were carried out to determine the flow patterns present at a number of locations within the structure of a full U-shaped JETC. The CFD solutions produced in these investigations used recommendations from the literature in the set-up of the CFD solver, and provided the computational component towards problem-specific validation of the CFD techniques used. A structured series of CFD-aided investigation and design processes were then performed. These processes were based around a series of analyses that evaluated the influence of a number of cell parameters in terms of cell airflow efficiency and velocity distortion. Four cell components; the inlet and exhaust stack baffle arrangements, the turning-vanes, the rear of the working section and augmenter entrance, and the lower exhaust stack, including the BB, were investigated in individual analyses. Throughout the investigations the value of CFD as a design tool was constantly assessed. Overall, the findings suggest that aerodynamic optimisation of the baffle arrangements would provide the greatest gains to cell airflow efficiency. As some cells contain as many as three baffle arrangements, the potential increases made to cell airflow capacity are sizable. Through implementing the findings of the baffle arrangement investigations, static pressure loss across the five-row baseline arrangement was reduced by 79%. For low levels of velocity distortion in the upstream region of the working section, the need to design the inlet stack baffles in the turning-vane arrangement was highlighted. Mid-baffle vane alignment, consistent flow channels, and sufficiently low chord to gap ratios should be incorporated into a turning-vane design to maximise flow uniformity. The need for the baffle and vane components to combine with the geometry of the cell to limit adverse pressure gradients was found as a requirement to minimise inner corner separation, and the downstream threat it creates to a safe testing environment. CFD proved to be a valuable analysis tool throughout the investigations performed in this thesis. The number of design iterations analysed, and the detail of data that could be extracted, significantly exceeded what could have been achieved through an isolated experimental testing programme.
APA, Harvard, Vancouver, ISO, and other styles
5

Saleh, Amer Mohamed. "Well test and production prediction of gas condensate reservoirs." Thesis, Heriot-Watt University, 1992. http://hdl.handle.net/10399/813.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schreier, Sebastian. "Development of a sloshing test rig." Aachen Shaker, 2009. http://d-nb.info/997162120/04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Swanson, Erik Evan. "Evaluation of the VPI & SU fluid film bearing test rig." Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-09122009-040419/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Freemire, Ben. "High pressure gas filled RF cavity beam test at the Fermilab Mucool test area." Thesis, Illinois Institute of Technology, 2013. http://pqdtopen.proquest.com/#viewpdf?dispub=3574935.

Full text
Abstract:

With a new generation of lepton colliders being conceived, muons have been proposed as an alternative particle to electrons. Muons lose less energy to synchrotron radiation and a Muon Collider can provide luminosity within a smaller energy range than a comparable electron collider. This allows a circular collider to be built. As part of the accelerator, it would also be possible to allow the muons to decay to study neutrinos.

Because the muon is an unstable particle, a muon beam must be cooled and accelerated within a short amount of time. Muons are generated with a huge phase space, so radio frequency cavities placed in strong magnetic fields are required to bunch, focus, and accelerate the muons. Unfortunately, traditional vacuum RF cavities have been shown to break down in the magnetic fields necessary.

To successfully operate RF cavities in strong magnetic fields, the cavity can be filled with a high pressure gas in order to mitigate breakdown. The gas has the added benefit of providing cooling for the beam. The electron-ion plasma created in the cavity by the beam absorbs energy and degrades the accelerating electric field of the cavity. As electrons account for the majority of the energy loss in the cavity, their removal in a short time is highly desirable. The addition of an electronegative dopant gas can greatly decrease the lifetime of an electron in the cavity.

Measurements in pure hydrogen of the energy consumption of electrons in the cavity range in 10-18 and 10-16 joules per RF cycle per electron. When hydrogen doped with dry air is used, measurements of the power consumption indicate an energy loss range of 10-20 to 10-18 joules per RF cycle per ion, two orders of magnitude improvement over non-doped measurements. The lifetime of electrons in a mixture of hydrogen gas and dry air has been measured from < 1 ns, up to 200 ns. The results extrapolated to the parameters of a Neutrino Factory and Muon Collider indicate that a high pressure gas filled RF cavity will work in a cooling-channel for either machine.

APA, Harvard, Vancouver, ISO, and other styles
9

Andrinopoulos, Nikolaos. "Development of a test facility for experimental investigation of fluid-structure interaction." Licentiate thesis, KTH, Energy Technology, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-10544.

Full text
Abstract:

Fluid-structure interaction phenomena are strongly related to the loading appearing on many energy converting components introducing limitations for improving their efficiency. The term “fluid-structure interaction” includes many phenomena with the “shock wave – boundary layer interaction” being one of the most important. This interaction is commonly met in turbomachines where the flow can accelerate enough to become compressible and can cause separation of the boundary layer formed on the structural components of the machine. This results to fluctuating loading on the structure which can lead to its failure due to High Cycle Fatigue (HCF).

A vibrating structure in compressible flow can become unstable depending on the sign of the aerodynamic damping that the flow has on the structure. Although the mechanism that causes a structure to become unstable is known, the limits of the stability region are not yet possible to predict with reasonable accuracy. It is therefore necessary to investigate the underlying mechanism of fluid-structure interaction by means of experimental and numerical studies for providing prediction tools regarding the stability change.

The present work aims at developing an experimental facility to be used for investigating fluid-structure interaction. The experimental setup is based on the concept of a simplified aeroelastic test case bringing into focus the area of interaction between an oscillating shock wave and a turbulent boundary layer. This work is based on previous research campaigns using the same generic experimental concept but takes the investigation further to higher and so far unexplored reduced frequencies. The experimental setup has been validated regarding its suitability to meet the research objectives by running vibration tests at an initial stage without the effect of flow.

The results from the experimental validation of the facility have shown that the design objectives are met. Specifically the vibration response of the test object concerning vibration amplitude and vibration mode shape is desirable; the vibration amplitude is in the range of 0.5mm and the mode shape remains below the 2nd throughout the targeted frequency range (0-250Hz). This makes the facility suitable for simplified investigation of fluid-structure interaction, bringing the shock foot region into focus.

Having validated the facility performing vibration tests without flow, tests with flow is the next step to take place. Since the vibration response of the test object has been investigated in detail, tests with flow will reveal the influence of fluidstructure interaction on the dynamic response of the test object. Similarly, the influence of this interaction on the flow side can be assessed by monitoring the flow parameters. As a first step for performing this investigation, the design study and the validation results for the experimental setup are presented in this work.

 

 

APA, Harvard, Vancouver, ISO, and other styles
10

Uchimoto, Mari L. "Developing a microRNA body fluid identification test for use in forensic casework." Thesis, University of Huddersfield, 2014. http://eprints.hud.ac.uk/id/eprint/24470/.

Full text
Abstract:
Body fluid identification (BFID) forms a crucial aspect within forensic investigations. BFID is particularly important where the origin of a DNA profile is also needed e.g. sexual assaults. The aim of this work was to develop a RNA-based BFID for use in forensic casework. The test was developed in three stages: exploring co-isolation and single isolation strategies, screening and selecting RNA markers and different casework conditions e.g. low-level, non-human, degraded and mixed samples. Blood, saliva, skin, semen and vaginal material samples were collected. Samples underwent single or co-isolation (DNA, total RNA or messenger RNA), DNA quantification, cDNA synthesis and qPCR using a number of different candidate markers and reference genes for microRNA (miRNA) and messenger RNA. During the development of the test the following novel findings were observed: utilisation of complex co-isolation methods was not need for co-analysis of RNA and DNA; six highly discriminative miRNA markers were identified for miRNA analysis: blood (miR-451 and miR-194); saliva (miR-205); vaginal material (miR-224 and miR-335) and semen (miR-891a). In terms of casework applications, microRNA analysis showed potential for greater sensitivity than current enzymatic methods with the use of appropriate reference gene; species specificity was observed for reference gene RNU44; sample stability was observed in 1-yr bloodstains with miR-451 and RNU44 and successful resolution of major and minor components was achieved.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Test fluid"

1

Johnston, Peter R. A survey of test methods in fluid filtration. Houston: Gulf Pub. Co., 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Steffen, Christopher J. An investigation of DTNS2D for use as an incompressible turbulence modelling test-bed. [Washington, DC]: National Aeronautics and Space Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. A selection of experimental test cases for the validation of CFD codes. Neuilly-sur-Seine: AGARD, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. A selection of experimental test cases for the validation of CFD codes. Neuilly-sur-Seine, France: AGARD, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kasenow, Michael. Aquifer test data: Analysis and evaluation. Highlands Ranch, Colo: Water Resources Publications, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Branstetter, J. Robert. Flight test to determine feasibility of a proposed airborne wake vortex detection concept. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Johnston, Peter R. Fluid sterilization by filtration: The filter integrity test and other filtration topics. 2nd ed. Buffalo Grove, Ill: Interpharm Press, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fluid sterilization by filtration: The filter-integrity test and other filtration topics. Buffalo Grove, IL: Interpharm Press, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Neumann, Richard D. Requirements in the 1990's for high enthalpy, ground test facilities for CFD validation. Washington, D. C: American Institute of Aeronautics and Astronautics, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Smith, Apollo Milton Olin. Technical evaluation report on the Fluid Dynamics Panel Symposium on Aerodynamic and related hydrodynamic studies using water facilities. Neuilly sur Seine, France: AGARD, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Test fluid"

1

Schindel, Leon H. "Fluid Dynamics Ground Test Facilities." In Handbook of Fluid Dynamics and Fluid Machinery, 1133–70. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2009. http://dx.doi.org/10.1002/9780470172643.ch16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Derenne, Michel, J. R. Payne, Luc Marchand, and Andre Bazergui. "Development of Test Procedures For Fire Resistance Qualification of Gaskets." In Fluid Sealing, 193–207. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2412-6_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Periaux, Jacques, Gabriel Bugeda, Panagiotis K. Chaviaropoulos, Kyriakos Giannakoglou, Stephane Lanteri, and Bertrand Mantel. "Synthesis of Test Cases." In Notes on Numerical Fluid Mechanics (NNFM), 289–330. Wiesbaden: Vieweg+Teubner Verlag, 1998. http://dx.doi.org/10.1007/978-3-322-90193-4_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Periaux, Jacques, Gabriel Bugeda, Panagiotis K. Chaviaropoulos, Kyriakos Giannakoglou, Stephane Lanteri, and Bertrand Mantel. "Synthesis of Test Cases." In Notes on Numerical Fluid Mechanics (NNFM), 451–61. Wiesbaden: Vieweg+Teubner Verlag, 1998. http://dx.doi.org/10.1007/978-3-322-90193-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Toro, Eleuterio F. "Multidimensional Test Problems." In Riemann Solvers and Numerical Methods for Fluid Dynamics, 585–96. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/b79761_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Toro, Eleuterio F. "Multidimensional Test Problems." In Riemann Solvers and Numerical Methods for Fluid Dynamics, 551–62. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-662-03490-3_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Koloszar, L., N. Villedieu, H. Deconinck, I. S. Bosnyakov, S. V. Mikhaylov, A. N. Morozov, V. Y. Podaruev, et al. "Aeroacoustic Test Cases." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 661–83. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-12886-3_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Toro, Eleuterio F. "Multidimensional Test Problems." In Riemann Solvers and Numerical Methods for Fluid Dynamics, 581–92. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-662-03915-1_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hirsch, Ch, and Erbing Shang. "Specification of Test Case TC3." In Notes on Numerical Fluid Mechanics (NNFM), 165–79. Wiesbaden: Vieweg+Teubner Verlag, 1998. http://dx.doi.org/10.1007/978-3-322-89859-3_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Adams, Maurice L. "Pumping Fluid-Solid-Particle Mixtures." In Rotating Machinery Research and Development Test Rigs, 77–81. Boca Raton : Taylor & Francis, CRC Press, [2017]: CRC Press, 2017. http://dx.doi.org/10.1201/9781315116723-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Test fluid"

1

Moder, Manja, and Urška Cafuta. "MPC-Test: An introduction and examples of test results." In International conference Fluid Power 2017. University of Maribor Press, 2017. http://dx.doi.org/10.18690/978-961-286-086-8.13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tič, Vito, and Darko Lovrec. "Test Device and Automated Test Procedures for Measuring Valve Characteristics." In International conference Fluid Power 2019. University of Maribor Press, 2019. http://dx.doi.org/10.18690/978-961-286-300-5.12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Milholen, am E, I, William, and Ndaona IChokani. "Computational analysis of semi-span test techniques." In Fluid Dynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1995. http://dx.doi.org/10.2514/6.1995-2290.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kalb, Roland, and Darko Lovrec. "Seal Material Compatibility Test Procedure." In International conference Fluid Power 2019. University of Maribor Press, 2019. http://dx.doi.org/10.18690/978-961-286-300-5.11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tinney, Charles E., and John Valdez. "A new test stand for measuring wall shear stress." In 2018 Fluid Dynamics Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2018. http://dx.doi.org/10.2514/6.2018-3085.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tyler, C. "A Joint Computational Fluid Dynamics and Experimental Fluid Dynamics Test Program." In 42nd AIAA Aerospace Sciences Meeting and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2004. http://dx.doi.org/10.2514/6.2004-877.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Roby, S. H., R. J. Mayer, S. G. Ruelas, J. G. Martinez, and J. A. Rutherford. "Development of a Bench Test to Predict Oxidative Viscosity Thickening in the Sequence IIIG Engine Test." In 2004 Powertrain & Fluid Systems Conference & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2004. http://dx.doi.org/10.4271/2004-01-2985.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pennings, Bert, Mark van Drogen, Arjen Brandsma, Erik van Ginkel, and Marlène Lemmens. "Van Doorne CVT Fluid Test: A Test Method on Belt-Pulley Level to Select Fluids for Push Belt CVT Applications." In SAE Powertrain & Fluid Systems Conference & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2003. http://dx.doi.org/10.4271/2003-01-3253.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

TANGNEY, D. "An airline view on built-in test equipment." In 7th Computational Fluid Dynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1985. http://dx.doi.org/10.2514/6.1985-1912.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rosemann, H., E. Stanewsky, and G. Hefer. "The Cryogenic Ludwieg-Tube of DLR and its new adaptive wall test section." In Fluid Dynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1995. http://dx.doi.org/10.2514/6.1995-2198.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Test fluid"

1

Modro, S., S. Aksan, V. Berta, and A. Wahba. Review of LOFT (Loss-of-Fluid Test) large break experiments. Office of Scientific and Technical Information (OSTI), October 1989. http://dx.doi.org/10.2172/5497189.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wada, Hisayuki, Osamu Kurosawa, Fumitaka Ito, Shinichi Kitamura, Hirokazu Saitou, Tomotsugu Shiroi, Takahiro Tatani, and Kazuo Yamamori. Study of Standardization About Oxidation Test Method for Automotive Transmission Fluid. Warrendale, PA: SAE International, September 2005. http://dx.doi.org/10.4271/2005-08-0410.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Serrato, M. G. In Situ Decommissioning Sensor Network, Meso-Scale Test Bed - Phase 3 Fluid Injection Test Summary Report. Office of Scientific and Technical Information (OSTI), September 2013. http://dx.doi.org/10.2172/1098219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Peterson, E. W., P. L. Lagus, and K. Lie. Fluid flow measurements of Test Series A and B for the Small Scale Seal Performance Tests. Office of Scientific and Technical Information (OSTI), December 1987. http://dx.doi.org/10.2172/5697691.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Boyce, K., and J. T. Chapin. Dispensing Equipment Testing with Mid-Level Ethanol/Gasoline Test Fluid: Summary Report. Office of Scientific and Technical Information (OSTI), November 2010. http://dx.doi.org/10.2172/992805.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hauserman, W. Test plan for valveless ash removal from pressurized fluid bed combustion systems. Office of Scientific and Technical Information (OSTI), July 1989. http://dx.doi.org/10.2172/5589465.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Motyka, R. J., L. D. Queen, C. J. Janik, D. S. Sheppard, R. J. Poreda, and S. A. Liss. Fluid geochemistry and fluid-mineral equilibria in test wells and thermal-gradient holes at the Makushin geothermal area, Unalaska Island, Alaska. Alaska Division of Geological & Geophysical Surveys, 1989. http://dx.doi.org/10.14509/2462.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Motyka, R. J., L. D. Queen, C. J. Janik, D. S. Sheppard, R. J. Poreda, and S. A. Liss. Fluid geochemistry and fluid mineral equilibria in test wells and thermal gradient holes at the Makushin Geothermal area, Unalaska Island, Alaska. Alaska Division of Geological & Geophysical Surveys, 1985. http://dx.doi.org/10.14509/1237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sorini, S. S. Development and validation of a standard test method for sequential batch extraction of waste with acidic extraction fluid. Office of Scientific and Technical Information (OSTI), August 1993. http://dx.doi.org/10.2172/10194953.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

J. Rutqvist, C.F. Tsang, and Y. Tsang. Analysis of Coupled Multiphase Fluid Flow, Heat Transfer and Mechanical Deformation at the Yucca Mountain Drift Scale Test. Office of Scientific and Technical Information (OSTI), May 2005. http://dx.doi.org/10.2172/850440.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Test fluid' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography