Relevant bibliographies by topics / Teplárny

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Teplárny'

Author: Grafiati
Published: 28 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Teplárny.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Teplárny"

1

Sobotka, Tomáš. "Modernizace a ekologizace teplárny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230033.

Full text
Abstract:
The target of this diploma thesis is design of cogeneration unit with following requirements: • Installation of new unit instead of the old and used up one. • Electric energy supply within Supportive service – fast starts • Greening (replacement of coal with natural gas) At the beginning I deal with the current state of old unit. In the next part there is the design of new technological unit, which consists of design of boilers, gas engines, steam turbines. Final phase of the thesis includes economical analysis focused on setting of financial return.
APA, Harvard, Vancouver, ISO, and other styles
2

Šilar, Martin. "Ekologické aspekty paroplynové teplárny Červený Mlýn." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219023.

Full text
Abstract:
The master’s thesis deals with the environmental aspects of combined heat and power station Červený Mlýn (Red Mill). The introductory part of the thesis focuses on the current production technology and the electricity balance of the power station. The heat and power station (also called combined cycle heat and power plant) is scrutinized in terms of emissions sources, focusing on pollutant emissions to air in the following chapter. In this part of the thesis the quantities of the released emissions, namely solid particulate matter (TZL), sulfur dioxide (SO2), carbon dioxide (CO2) are also calculated. The calculation is worked out according to the valid Czech legislation. Further on, the current production technology of the power station is compared with the best available technologies according to the valid directive 2008/1/EC of the European Parliament and of the Council concerning integrated pollution prevention and control. The last chapter presents the innovative technologies which could possibly be installed to reduce pollution emissions (especially nitrogen oxides - NOx) to air at the heat and power station Červený Mlýn.
APA, Harvard, Vancouver, ISO, and other styles
3

Peterka, Lubomír. "Návrh teplárny s pístovým parním motorem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228961.

Full text
Abstract:
The final thesis deals with the heating plant with piston steam engine design according to heat consumption background in the location of Velky Karlov and with the design of a heating scheme including its explicit parameters. Further on it deals with the possibilities of the heating plant output regulation and with the solution of natural gas and biomass heating plant operations aside the heating period.
APA, Harvard, Vancouver, ISO, and other styles
4

Buřil, Tomáš. "Návrh tepelného okruhu teplárny s kogenerační jednotkou 1600kWe." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230883.

Full text
Abstract:
Main target of this master´s thesis is a projection of a thermal circuit of a heating plant, which uses waste heat of a cogeneration unit with power of 1600 kWe. Electric power of a cogeneration unit is supplemented with an electric power produced from a waste heat. All heat is further used for heating in a warm water heating system. Within this thesis are executed projections of a thermal circuit of a heating plant, choice of particular devices, determination of a thermal power of devices and also determination of conditions of particular heat – transferring substances. Furthermore, design of particular devices is made, mainly for basic dimensions and heat transfer.
APA, Harvard, Vancouver, ISO, and other styles
5

Hurban, Dominik. "Projekční návrh regeneračního ohříváku napájecí vody teplárny spalující biomasu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232139.

Full text
Abstract:
The main task of this diploma thesis is a draft design low-regenerative feedwater heater. There is conducted thermal and hydraulic calculation of this device. After that there is detaily described the method for controlling the temperature of the outlet water. Conclusion includes calculations for sizing wall thickness of the main tires. Projection drawing is part of the work as a supplement.
APA, Harvard, Vancouver, ISO, and other styles
6

Mužila, Martin. "Náhrada parovodu horkovodem v systému centrálního zásobování teplem teplárny Martinská teplárenská, a.s." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231255.

Full text
Abstract:
The work is focused on area of exchanging steam distribution net for hot water one, in central distribution net of Martin’s heating plant. The main subject, which talks about pros and cons in this exchange process, is determination of heat losses which are created on heat distribution net during different operating status. These heat losses are calculated and on their basis some conclusions are concluded. Moreover, new heat exchanger is designed for certain conditions and also mathematical model of distribution net is created, which is suitable for checking different operating status. As a result of the work is technic’s and economic’s analysis of this project.
APA, Harvard, Vancouver, ISO, and other styles
7

Kubíček, Ondřej. "Návrh ohříváku topné vody pro vyvedení tepla z teplárny o výkonu 5,5 MW." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232145.

Full text
Abstract:
The Master thesis deals with the water-heater design for heat-exchange station with total power output 5,5 MW. The goal of the thesis is to make thermal and hydraulic calculation in the extent of the assignment and to develop a projection drawing of the heater along with a correct dimensioning of the shell and flanges. Thesis goals were met according to the assignment. The introductory part of the thesis briefly introduces to the heat-exchanger problematic and selected topics about heat-transfer. Following the basic mass and energy flows calculation inside the heater together with the thermal and hydraulic design determines the size of the heat transfer surface of pipes. After that the design calculations were made, whose results are used to determine the basic dimensions of selected parts and checking the accuracy of designed dimensions. In the last part of the work the design process is more described also with a more detailed description of selected parts.
APA, Harvard, Vancouver, ISO, and other styles
8

Drahokoupilová, Lucie. "Optimalizace provozu kotelny Brno-Bystrc." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228963.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hrubý, Vojtěch. "Teplárna na biomasu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228995.

Full text
Abstract:
The content of this dissertation is to utilize foundations of heat consumption in Velký Karlov and to propose and replace the main district heating plant into the heating plant which uses biomass as its fuel. With techno-economic evaluation of the annual operating central heating plant evaluate the suitability of using a steam turbine or steam engine. The proposal for a steam turbine is chosen by the preliminary calculation. There are showed suitable possibilities of working and its evaluation considered to return period.
APA, Harvard, Vancouver, ISO, and other styles
10

Zemánek, Josef. "Parní turbina pro teplárnu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230744.

Full text
Abstract:
The diploma thesis concentrates on a project of backpreassure steam turbine. These topics are analyzed in more detail: design of balance schema, thermodynamic calculation, loss coefficient and its effect on the loss. Technical solutions are designed according to given details of a steam and chosen conditions of use.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Teplárny' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography