Academic literature on the topic 'Tensioning'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tensioning.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Tensioning"
Liu, Xuechun, Yiwen Zhang, Ailin Zhang, and Liang Wu. "Model test for the tensioning construction process of a large-span prestressed suspended dome." Advances in Structural Engineering 20, no. 4 (July 5, 2016): 504–18. http://dx.doi.org/10.1177/1369433216655920.
Full textLiu, Zhansheng, Guoliang Shi, Anshan Zhang, and Chun Huang. "Intelligent Tensioning Method for Prestressed Cables Based on Digital Twins and Artificial Intelligence." Sensors 20, no. 24 (December 8, 2020): 7006. http://dx.doi.org/10.3390/s20247006.
Full textMoatshe, Gilbert, Jorge Chahla, Alex Brady, Grant Dornan, Kyle Muckenhirn, Bradley Kruckeberg, Lars Engebretsen, and Robert F. LaPrade. "The Influence of Graft Tensioning Sequence on Tibiofemoral Orientation during Bicruciate and Posterolateral Corner Knee Ligament Reconstruction: A Biomechanical Study." Orthopaedic Journal of Sports Medicine 6, no. 7_suppl4 (July 1, 2018): 2325967118S0006. http://dx.doi.org/10.1177/2325967118s00066.
Full textLi, Bo, and Zhankuan Zhang. "Analysis and Optimization of the Tensioning Effect on a Wood-Cutting Circular Saw Blade Tensioned by Multispot Pressure." Forest Products Journal 69, no. 1 (January 1, 2019): 61–69. http://dx.doi.org/10.13073/fpj-d-17-00063.
Full textMoatshe, Gilbert, Jorge Chahla, Alex W. Brady, Grant J. Dornan, Kyle J. Muckenhirn, Bradley M. Kruckeberg, Mark E. Cinque, Travis Lee Turnbull, Lars Engebretsen, and Robert F. LaPrade. "The Influence of Graft Tensioning Sequence on Tibiofemoral Orientation During Bicruciate and Posterolateral Corner Knee Ligament Reconstruction: A Biomechanical Study." American Journal of Sports Medicine 46, no. 8 (June 28, 2018): 1863–69. http://dx.doi.org/10.1177/0363546517751917.
Full textKulinowski, Piotr, Piotr Kasza, and Jacek Zarzycki. "The Analysis of Effectiveness of Conveyor Belt Tensioning Systems." New Trends in Production Engineering 3, no. 1 (August 1, 2020): 283–93. http://dx.doi.org/10.2478/ntpe-2020-0023.
Full textShen, Sheng, Yao Wang, Sheng-Lan Ma, Di Huang, Zhi-Hong Wu, and Xiao Guo. "Evaluation of Prestress Loss Distribution during Pre-Tensioning and Post-Tensioning Using Long-Gauge Fiber Bragg Grating Sensors." Sensors 18, no. 12 (November 23, 2018): 4106. http://dx.doi.org/10.3390/s18124106.
Full textAlekseev, Alexandr E., Igor O. Dumanskij, and Alexey V. Prokhorov. "Plate Dampers in the Tensioning Plate Dampers in the Tensioning." Lesnoy Zhurnal (Forestry Journal), no. 5 (October 15, 2021): 142–49. http://dx.doi.org/10.37482/0536-1036-2021-5-142-149.
Full textMo, Qiu Yun, Zhan Kuan Zhang, and Hao Li. "The Study on the Residual Stresses of Circular Sawblades with Spherical Surface Pressed Many Spots." Applied Mechanics and Materials 29-32 (August 2010): 1323–26. http://dx.doi.org/10.4028/www.scientific.net/amm.29-32.1323.
Full textHe, Jia Yuan, Yan Wang, and Nabil Gindy. "Investigation of Fixture Design Exploring Pre-Tensioning Forces." Advanced Materials Research 97-101 (March 2010): 3252–55. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.3252.
Full textDissertations / Theses on the topic "Tensioning"
Xu, Jun. "Dynamic thermal tensioning for welding induced distortion control /." Thesis, Connect to this title online; UW restricted, 2006. http://hdl.handle.net/1773/7145.
Full textNilimaa, Jonny. "Upgrading concrete bridges : post-tensioning for higher loads." Licentiate thesis, Luleå tekniska universitet, Byggkonstruktion och -produktion, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-25964.
Full textDet finns ett stort antal gamla konstruktioner runtom i världen och många byggdes för helt andra användningsområden än vad de numera används till. Som ett exempel kan nämnas att svenska järnvägsbroar i början av 1900-talet byggdes för att klara av att bära axellaster på maximalt 200 kN, medan några av våra nybyggda broar är konstruerade för dubbelt så stora axellaster. Även traffikmängden har mångdubblats och tåghastigheterna är nu högre än någonsin. Trågbroar i armerad betong är en typisk bro som byggdes i Sverige framförallt på 50-talet och den är fortfarande en av de vanligaste brotyperna i Sverige. Trågbroarna konstruerades normalt för att bära lägre laster än vad vi har idag och för att kunna ha kvar dessa broar när lasterna ökar kan det krävas någon form av uppgradering av bärförmågan. Det finns två sätt att förbättra bärförmågan på en gammal bro, nämligen administrativ uppgradering eller förstärkning. Administrativ uppgradering innebär att nya förbättrade beräkningsmetoder används tillsammans med verkliga materialhållfastheter, geometrier och laster för att mer noggrant räkna ut brons bärförmåga. Normalt visar det sig att bärförmågan är högre än vad de ursprungliga beräkningarna antydde. På så vis höjs kapaciteten med minimal fysisk åverkan på bron. Uppgradering genom förstärkning innebär däremot att konstruktionens bärförmåga höjs genom att förändra bron ur ett rent fysiskt perspektiv. Metoder för att öka böjkapaciteten på trågbroar i betong har utvecklats och testats tidigare, men förstärkningsmetoder för att höja tvärkraftskapaciteten saknas däremot fortfarande. Målet för denna avhandling ligger därför i att utveckla en förstärkningsmetod som kan användas för att förbättra tvärkraftskapaciteten för bottenplattan på trågbroar i betong. Det finns dock några svårigheter sammankopplade med förstärkning av befintliga järnvägsbroar, t.ex. tågtraffik under förstärkningsförfarandet och att viktiga betongytor är skyddade av ballast.Inga befintliga förstärkningsmetoder bedömdes däremot som lämpliga för det avsedda användningsområdet vid ”State-of-the-Art’’ studien. Invändig efterspänning av broplattan i tvärledd bedömdes som den bäst lämpade förstärkningsmetoden och efterföljande forskning fokuserades på att reda ut möjligheter för och förstärkningseffekter av efterspänning. Två olika laboratorieförsök genomfördes under forskningsprojektet och förstärkningsmetoden testades slutligen vid ett fältförsök på en 50 år gammal järnvägsbro i Haparanda.Själva tillvägagångssättet för förstärkningsmetoden består av fyra viktigaoch sammanhängande arbetssteg:1. Borrning av horisontella hål tvärs igenom trågbrons bottenplatta.2. Installation av själva försstärkningssystemet.3. Efterspänning av förstärkningssystemet.4. Förslutning av förstärkningssystemet.Både laboratorie och fältförsöken blev lyckade och resultaten visade att stålarmeringen inuti betongen trycktes ihop när trågbron efterspänndes. Tack vare denna kompression så kan broplattan bära högre laster innan dragarmeringen börjar flyta och bron slutligen går sönder. Med andra ord så höjdes brons böjkapacitet. Fältförsöket visade att de åtta spännstagen, efterspännda med 430 kN per stag, helt och hållet motverkade dragarmeringens påkänningar av ett tåg med axellasten 215 kN. Förstärkningsmetodens effekt på tvärkraftskapaciteten är däremot inte lika lätt att påvisa men laboratorieförsöken visade att töjningen reducerades betydligt i den uppbockade dragarmeringen, i zonen där plattan fäster i huvudbalkarna. De lägre töjningsnivåerna kan tolkas som lägre skjuvpåkänningar och efterspänningen kan därmed ha en positiv effekt på broplattans tvärkraftskapacitet. Laboratorieförsöken visade däremot att både Eurokod 2 och BBK är restriktiva när det gäller att uppskatta efterspänningens effekt på tvärkraftskapaciteten. En ny förstärkningsmetod för trågbroar i betong har därmed föreslagits i och med denna avhandling, men en del frågetecken kvarstår och i kapitel 8 ges därför förslag på fortsatta forskningsområden.
Godkänd; 2013; 20130107 (jonnil); LICENTIATSEMINARIUM Ämne: Konstruktionsteknik/Structural Enginering Examinator: Professor Björn Täljsten, Institutionen för samhällsbyggnad och naturresurser, Luleå tekniska universitet Diskutant: Professor Mohammad Al-Emrani, Chalmers tekniska högskola, Göteborg Tid: Tisdag den 5 februari 2013 kl 13.00 Plats: F1031, Luleå tekniska universitet
Hutchison, Michael John. "Corrosion of Post-Tensioning Strands in Ungrouted Ducts - Unstressed Condition." Scholar Commons, 2013. http://scholarcommons.usf.edu/etd/4905.
Full textBruce, Trevor Louis. "Behavior of Post-Tensioning Systems Subjected to Inelastic Cyclic Loading." Thesis, Virginia Tech, 2014. http://hdl.handle.net/10919/49111.
Full textMaster of Science
Yang, Xiong. "Use of Fiber Reinforced Polymer Composite Cable for Post-tensioning Application." FIU Digital Commons, 2015. http://digitalcommons.fiu.edu/etd/2259.
Full textTofangchi, Mahyari Abbas-Ali. "Static and seismic rehabilitation of concrete gravity dams by post-tensioning." Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=26430.
Full textIn this study, the flood and seismic safety evaluations of prestressed dams were carried out using the gravity method, and linear and fracture finite element methods. Two typical concrete gravity dam models, 35 m and 90 m in heights, were examined. The performance of different post-tensioning modelling techniques such as the equivalent force method, and bonded/unbonded cable elements was examined in finite element analyses. A new nonlinear analysis methodology using displacement control was studied to determine the required amount of post-tensioning forces under flood condition. Sliding stability (local and global), overstressing, and controlled damage requirements were considered to develop post-tensioning design criteria in rehabilitation of concrete gravity dams. Various schemes of post-tensioning cable layouts were examined in seismic analyses.
The different prestressing modelling techniques present almost identical static and seismic structural behaviours. The material properties of the horizontal joint at the dam-foundation interface, and the tendon layouts were found the key prestressing design parameters. Linear finite element analyses predict higher required prestressing forces compared to other analysis methods. In general, flood resistant: design of prestressing also presents adequate seismic performance for small dams. However, additional partial prestressing is required near the downstream face of higher dams to prevent cracking at this location.
Mortazavi, A. A. "Behaviour of confined concrete columns with and without lateral pre-tensioning." Thesis, University of Sheffield, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.524999.
Full textLazzarini, Daniel Louis. "Seismic Performance of Unreinforced Masonry Walls Retrofitted with Post-Tensioning Tendons." DigitalCommons@CalPoly, 2009. https://digitalcommons.calpoly.edu/theses/143.
Full textKajewski, Stephen L. "Post-tensioning and its effect on multi-level formwork load distribution." Thesis, Queensland University of Technology, 1998. https://eprints.qut.edu.au/36033/8/36033_Digitised_Thesis.pdf.
Full textTaha, Mahmoud Reda. "A new non-metallic anchorage system for post-tensioning applications using CFRP tendons." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0022/NQ49541.pdf.
Full textBooks on the topic "Tensioning"
Tensioning of tendons: Force-elongation relationship. London: T. Telford, 1986.
Find full textO'Brien, J. Scott. Very early post-tensioning of prestressed concrete pavements. Austin, Tex: Center for Transportation Research, Bureau of Engineering Research, University of Texas at Austin, 1985.
Find full textFédération internationale de la précontrainte. Commission on Prestressing Materials and Systems. Recommendations for the acceptance of post-tensioning systems. London: SETO, 1993.
Find full textHurlebaus, Stefan, Mary Beth D. Hueste, Madhu M. Karthik, and Tevfik Terzioglu. Inspection Guidelines for Bridge Post-Tensioning and Stay Cable Systems Using NDE Methods. Washington, D.C.: Transportation Research Board, 2017. http://dx.doi.org/10.17226/24779.
Full textTheryo, Teddy S. Guidelines for sampling, assessing, and restoring defective grout in prestressed concrete bridge post-tensioning ducts. McLean, VA: U.S. Department of Transportation, Federal Highway Administration, Research, Development, and Technology, Turner-Fairbank Highway Research Center, 2013.
Find full textZappettini, Gianfranco. Gianfranco Zappettini: Tensioni nel colore. Firenze: Santo Ficara, 2009.
Find full textMeta, Beqir. Tensioni greko-shqiptar, 1939-1949. Tiranë: Shtëpia Botuese "Geer", 2002.
Find full textZappettini, Gianfranco. Gianfranco Zappettini: Tensioni nel colore. Firenze: Santo Ficara, 2009.
Find full textTang, Man-Chung. The Story of the Koror Bridge. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2014. http://dx.doi.org/10.2749/cs001.
Full textCasadio, Franco A. Diplomazia multilaterale: Tensioni, crisi e negoziato, 1945-1964. Napoli: Edizioni scientifiche italiane, 1991.
Find full textBook chapters on the topic "Tensioning"
Mae, Tatsuo, and Braden C. Fleming. "ACL Graft Tensioning." In Controversies in the Technical Aspects of ACL Reconstruction, 289–99. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-52742-9_27.
Full textLibby, James R. "Post-tensioning Systems and Procedures." In Modern Prestressed Concrete, 665–95. Boston, MA: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4615-3918-6_16.
Full textScheffler, Sven U. "Tensioning of Grafts: Any Evidence?" In Anterior Cruciate Ligament Reconstruction, 209–14. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-45349-6_23.
Full textMae, Tatsuo, and Konsei Shino. "Tensioning and Fixation of the Graft." In ACL Injury and Its Treatment, 211–20. Tokyo: Springer Japan, 2016. http://dx.doi.org/10.1007/978-4-431-55858-3_18.
Full textLozano-Galant, Jose Antonio, Dong Xu, and Jose Turmo. "Tensioning Process Update for Cable Stayed Bridges." In Lecture Notes in Civil Engineering, 283–87. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6713-6_27.
Full textFanelli, Gregory C. "Mechanical Graft Tensioning in Multiple Ligament Knee Surgery." In The Multiple Ligament Injured Knee, 335–43. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05396-3_22.
Full textFanelli, Gregory C. "Mechanical Graft Tensioning in Multiple Ligament Knee Surgery." In The Multiple Ligament Injured Knee, 323–30. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-0-387-49289-6_22.
Full textFanelli, Gregory C. "Mechanical Graft Tensioning in Posterior Cruciate Ligament Reconstruction." In Posterior Cruciate Ligament Injuries, 263–69. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-12072-0_21.
Full textVonk, E., A. Schwarz, and A. Bonetto. "Latest developments in replacing external post-tensioning tendons." In Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability, 2479–86. London: CRC Press, 2022. http://dx.doi.org/10.1201/9781003322641-309.
Full textGläser, Christian, and Kay Löffler. "Post-tensioning Systems for the Strengthening of Structures." In High Tech Concrete: Where Technology and Engineering Meet, 1994–2003. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-59471-2_228.
Full textConference papers on the topic "Tensioning"
Potvin, M. J., and J. C. Heald. "SAR Membrane Tensioning." In 10th Biennial International Conference on Engineering, Construction, and Operations in Challenging Environments and Second NASA/ARO/ASCE Workshop on Granular Materials in Lunar and Martian Exploration. Reston, VA: American Society of Civil Engineers, 2006. http://dx.doi.org/10.1061/40830(188)9.
Full textde Paiva Leite, A. J., E. F. Paiva Filho, and David Cardellini. "Grid Tensioning System: A New Approach To Deepwater Riser Tensioning." In Offshore Technology Conference. Offshore Technology Conference, 1993. http://dx.doi.org/10.4043/7261-ms.
Full textSenthil Kumar, R. R., and K. Sooryaprakash. "Industrial drive belt tensioning optimization." In 2013 International Conference on Current Trends in Engineering and Technology (ICCTET). IEEE, 2013. http://dx.doi.org/10.1109/icctet.2013.6675971.
Full textElnakhat, Hassan, and Roger Raymond. "Repair of PCCP by Post Tensioning." In Pipeline Division Specialty Conference 2006. Reston, VA: American Society of Civil Engineers, 2006. http://dx.doi.org/10.1061/40854(211)47.
Full textGeyer, Silvia, Daniela Lombardini, and Claudio Pin. "Lagen Bridge Cables installation and tensioning." In IABSE Congress, Stockholm 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2016. http://dx.doi.org/10.2749/stockholm.2016.2607.
Full textChevelcha, Elena, Clemens Josef Langbauer, and Herbert Hofstaetter. "Buckling Prevention Using the Tensioning Device." In SPE Artificial Lift Conference-Americas. Society of Petroleum Engineers, 2013. http://dx.doi.org/10.2118/165013-ms.
Full textWu, Yin. "Enhanced Active Heave Compensation Control Design for New Riser Hybrid Tensioning System in Deepwater Drilling." In ASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/omae2015-41675.
Full textWanvik, Leiv, and John Koos. "Two Tier Well Riser Top Tensioning System." In Offshore Technology Conference. Offshore Technology Conference, 2000. http://dx.doi.org/10.4043/11904-ms.
Full textMcguire, J., M. Menafra, K. Reighard, and A. Rella. "Evaluation of posterior cruciate Ligament Tensioning device." In 2009 IEEE 35th Annual Northeast Bioengineering Conference. IEEE, 2009. http://dx.doi.org/10.1109/nebc.2009.4967821.
Full textStevenson, John. "External Post-Tensioning Evaluation After 20 Years." In IABSE Conference, Copenhagen 2018: Engineering the Past, to Meet the Needs of the Future. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2018. http://dx.doi.org/10.2749/copenhagen.2018.024.
Full textReports on the topic "Tensioning"
Jenkins, Ryan, Michael Kreger, and Robert Frosch. Post-Tensioning Technologies. Purdue University, October 2013. http://dx.doi.org/10.5703/1288284315186.
Full textBurke, D. Specification Report for TACOM Track Tensioning Programme. Fort Belvoir, VA: Defense Technical Information Center, May 1992. http://dx.doi.org/10.21236/ada252824.
Full textRamirez, Julio, and Gerardo Aguilar. Experimental Evaluation and Implementation of Post-Tensioning in Concrete Bridge Decks. West Lafayette, Indiana: Purdue University, 2010. http://dx.doi.org/10.5703/1288284314245.
Full textSpagliardi, Fabio. Developing Light Collection Enhancements and Wire Tensioning Methods for LArTPC Neutrino Detectors. Office of Scientific and Technical Information (OSTI), January 2017. http://dx.doi.org/10.2172/1408207.
Full textRoesler, Jeffery, Sachindra Dahal, Dan Zollinger, and W. Jason Weiss. Summary Findings of Re-engineered Continuously Reinforced Concrete Pavement: Volume 1. Illinois Center for Transportation, May 2021. http://dx.doi.org/10.36501/0197-9191/21-011.
Full textEFFECT OF RANDOM PRE-STRESSED FRICTION LOSS ON THE PERFORMANCE OF A SUSPEN-DOME STRUCTURE. The Hong Kong Institute of Steel Construction, March 2022. http://dx.doi.org/10.18057/ijasc.2022.18.1.5.
Full textOverview of NIST research on seismic performance of moment resisting precast concrete beam-column joints containing post-tensioning. Gaithersburg, MD: National Institute of Standards and Technology, 1993. http://dx.doi.org/10.6028/nist.ir.5257.
Full text