Relevant bibliographies by topics / Technologie aditivní výroby

Contents

  1. Journal articles
  2. Dissertations / Theses

Academic literature on the topic 'Technologie aditivní výroby'

Author: Grafiati
Published: 28 June 2021
Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Technologie aditivní výroby.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Technologie aditivní výroby"

1

Harašta, Jakub. "Overview of the Foreign Experience of the Influence of Additive Manufacturing on Development and Deployment of Military Technology." Vojenské rozhledy 24, no. 2 (May 11, 2015): 64–71. http://dx.doi.org/10.3849/1210-3292.24.2015.02.064-071.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Technologie aditivní výroby"

1

Kopecký, Martin. "Konstrukce transtibiální protézy s využitím aditivní technologie výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230992.

Full text
Abstract:
The thesis deals with the design of a transtibial prosthesis by additive manufacturing technology. Based on walking biomechanics and the current situation of knowledge a prosthetic foot has been designed for a patient with low level of physical activity. Furthermore, the thesis describes the design of an individual socket for the patient. The socket has been designed by reverse engineer procedure based on the three-dimensional geometry of patient´s stump obtained by 3D scanning. Testing samples of the foot and the socket have been made for the check of functionality of both the devices and then subjected to mechanical tests in accordance to the methodology regulation ISO 10328. Finally, the thesis depicts the FDM technology used for the production of functional samples of the designed devices; assembly of modular transtibial prosthesis and its testing by the patient.
APA, Harvard, Vancouver, ISO, and other styles
2

Ilčík, Jindřich. "Geometrická přesnost výroby kovových dílů aditivní technologií Selective Laser Melting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230995.

Full text
Abstract:
The presented diploma thesis deals with the control of the geometric accuracy of the parts produced by additive manufacturing technology selective laser melting. The paper first analyzed the work of the other authors dealing with this issue. Based on obtained informations from this analysis were developed benchmark test parts for quality control of production on a commercial machine SLM 280 HL supplied by SLM Solutions GmbH. The work was carried out several tests to determine the appropriate parameters of construction parts. These tests, their results and conclusions are fully described in this papper.
APA, Harvard, Vancouver, ISO, and other styles
3

Šafl, Pavel. "Použití technologie 3D tisku pro návrh výroby náhradních dílů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442437.

Full text
Abstract:
This seminar thesis deals with the issue of 3D printing in companies. The aim was to describe additive manufacturing and 3D printing technologies. Moreover, to select the most common materials which are used and describe them. It was also necessary to perform a study of mechanical stresses and prepare a detailed description of the mechanical properties of materials. From these data, methods of use in the automotive industry were described. The most important part was to introduce case studies and create a description of which 3D printing technologies have the fastest return on investment.
APA, Harvard, Vancouver, ISO, and other styles
4

Tomeš, Jan. "Analýza přesnosti výroby lamel formy pneumatiky vyráběných SLM technologií." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241858.

Full text
Abstract:
The first part of the diploma thesis is focused on the analysis and evaluation of the current production of sipes by two SLM devices PXL and M2 Cusing, produced by Phenix Systems and Concept Laser companies. The samples of both machines went through the same manufacturing process and the same process of measurement and evaluation, in order to carry out comparison between individual machines. Geometric accuracy, surface roughness, mechanical properties, and material structure of the samples have been compared. For the sipes it was necessary to create a digital evaluation methodology of geometry. In the second part of the thesis, process parameters are selected on the basis of research and further their influence on surface roughness of manufactured sipes is analyzed.
APA, Harvard, Vancouver, ISO, and other styles
5

Mazoch, Jan. "Topologické optimalizace v technické praxi." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400688.

Full text
Abstract:
Master’s thesis deals with an issue of 3D printing and of using a topological optimization for editing a shape of a 3D printed product. First part of this thesis provides a general description of a subtractive manufacturing technology, specifically its use in CNC milling machines, and of an additive manufacturing technology which is used in 3D printing. Second part of this thesis describes the topological optimization per se and specific methods which are used in the topological optimization. In the third and the fourth part of this thesis, topological optimization modules of software Ansys and SolidWorks are described. In the fifth part of this thesis, the topological optimization capabilities for 3D printed product on a specific embodiments of a design lightning and a cross-beam are demonstrated.
APA, Harvard, Vancouver, ISO, and other styles
6

Tvrdoň, Radek. "3D tisk kovů robotem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443161.

Full text
Abstract:
The diploma thesis presents an overview of additive production technologies and a summary of technologies used for 3D metal printing using a robot. All of them are generally described and at the same time assigned to their specific commercial use, or the academic research that deals with them. The work examines the suitability of the material EN ISO 14341-A: G 3Si1 for 3D printing, for which a modification of the Col Metal Transfer technology, Cycle Step is used. The experimental printout of the sample is evaluated on the basis of surface and mechanical tests. Capillary test, examination of microstructure a macrostructure, tensile test and microhardness test. All of them were satisfactory and the suitability of the welding wire for 3D printing was confirmed by the given technology.
APA, Harvard, Vancouver, ISO, and other styles
7

Táborský, Pavel. "Využití aditivní technologie pro výrobu dílu pro automobilový průmysl." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417127.

Full text
Abstract:
The diploma thesis deals with the production process of optical part of headlamp module produced by additive technology. The thesis contains the characteristics of headlamp, current manufacturing technology and description of additive manufacturng methods. The practical part is focused on the production of a reflector using 3D printing. The conclusion of the thesis is dedicated to the measuring of light output and its evaluation.
APA, Harvard, Vancouver, ISO, and other styles
8

Vocílka, Ondřej. "Využití aditivní technologie pro návrh a výrobu prototypu oční protézy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402543.

Full text
Abstract:
This diploma thesis has an aim to fabricate a prototype of esthetical prosthesis using solely Rapid Prototyping aditive technology and to explore the possibility of using commercially available biocompatible materials. In the theoretical part, a description of types of ocular prosthesis types with the focus being on esthetic ocular prosthesis. is given. The practical part of the work offers a comprehensive view on the whole process of the prototype fabrication. It provides a description of creating the 3D model by scanning, geometrical adjustments of the model, textures mapping, print optimization and the printing itself. The closing part of the thesis consists of a discussing focused on an evaluation of the fabricated prototype followed by technical-economical assesment, a proposal of next steps, and a proposal of current usage of the created method.
APA, Harvard, Vancouver, ISO, and other styles
9

Nakládalová, Tereza. "Konstrukční optimalizace výrobní linky využitím aditivní technologie SLS." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382472.

Full text
Abstract:
This diploma thesis is focused on additive manufacturing, especially on technology Selective Laser Sintering (SLS) and the implementation of additive manufacturing into existing departments of industry, where current elements of systems are supplemented or directly replaced by new parts produced by these technologies. This thesis solves specific project of manipulation unit for manufacturing line. The main goals of the issue are analysis of current construction design and its deficiency, designing and optimalization of this unit in relation to SLS manufacturing technology, product realization and final evaluating of reached results. Part of the thesis is also design documentation.
APA, Harvard, Vancouver, ISO, and other styles
10

Vrána, Radek. "Návrh porézních struktur pro aditivní výrobu technologií selective laser melting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231472.

Full text
Abstract:
Metal additive technology allows to create objects with complex shape that are very difficult to produce by conventional technologies. An example of such component is a porous structure which is composed of periodical truss cells. This diploma thesis deals with the prediction of the mechanical properties of very small lattice structures made of additive manufacturing technology Selective Laser Melting. Using the proposed test specimens it was found that real dimensions of the trusses varies with size and orientation to the base platform. It was proposed and tested samples for rod tensile test made of SLM. Based on the real information about dimensions and mechanical properties of rods were predicted mechanical properties of lattice structures. A lot of mechanical tests were carried out to obtain the real mechanical properties. Test results and conclusions are described in the thesis.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Technologie aditivní výroby' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography