Academic literature on the topic 'Techniques de retouche'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Techniques de retouche.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Techniques de retouche":
Biard, Miguel, and Caroline Riche. "L’évolution du débitage d’éclats au Néolithique ancien et Moyen I en Haute-Normandie." Journal of Lithic Studies 4, no. 2 (September 15, 2017): 105–28. http://dx.doi.org/10.2218/jls.v4i2.2540.
Martellotta, Eva Francesca, Yinika L. Perston, Paul Craft, Jayne Wilkins, and Michelle C. Langley. "Beyond the main function: An experimental study of the use of hardwood boomerangs in retouching activities." PLOS ONE 17, no. 8 (August 16, 2022): e0273118. http://dx.doi.org/10.1371/journal.pone.0273118.
Baillet, Mickaël, and Serge Maury. "Et si l’on revoyait dos à dos lames et lamelles retouchées ? Approche expérimentale et tracéologique au service d’une recherche sur l’unité des techniques de retouche des dos au Châtelperronien." Paléo, no. 29 (December 30, 2018): 29–53. http://dx.doi.org/10.4000/paleo.3715.
Seehaus, Thorsten, Veniamin I. Morgenshtern, Fabian Hübner, Eberhard Bänsch, and Matthias H. Braun. "Novel Techniques for Void Filling in Glacier Elevation Change Data Sets." Remote Sensing 12, no. 23 (November 29, 2020): 3917. http://dx.doi.org/10.3390/rs12233917.
Falcucci, Armando, and Marco Peresani. "The contribution of integrated 3D model analysis to Protoaurignacian stone tool design." PLOS ONE 17, no. 5 (May 18, 2022): e0268539. http://dx.doi.org/10.1371/journal.pone.0268539.
Fasser, Nicolò, Federica Fontana, and Davide Visentin. "How many techniques to retouch a backed point? Assessing the reliability of backing technique recognition on the base of experimental tests." Archaeological and Anthropological Sciences 11, no. 10 (June 21, 2019): 5317–37. http://dx.doi.org/10.1007/s12520-019-00872-x.
Pavlenok, G. D., S. A. Kogai, R. N. Kurbanov, G. A. Mukhtarov, and K. K. Pavlenok. "The Emergence of Levallois Blade Industry in the Western Foothills of Tien Shan: Kulbulak Layer 24." Archaeology, Ethnology & Anthropology of Eurasia 51, no. 2 (July 13, 2023): 14–26. http://dx.doi.org/10.17746/1563-0110.2023.51.2.014-026.
Patil, Balasaheb H., and Patil P.M. "A Comprehensive Review on State-of-the-Art Image Inpainting Techniques." Scalable Computing: Practice and Experience 21, no. 2 (June 27, 2020): 265–76. http://dx.doi.org/10.12694/scpe.v21i2.1654.
Rahmani, Nooshin, Reza Tavakkoli-Moghaddam, and Taher Ahmadi. "Designing the Retouch Line in an Automobile Factory using a Simulation-based Optimization Technique; A Real Case Study." Procedia - Social and Behavioral Sciences 62 (October 2012): 995–1000. http://dx.doi.org/10.1016/j.sbspro.2012.09.169.
Gao, Xing, and Christopher J. Norton. "A critique of the Chinese ‘Middle Palaeolithic’." Antiquity 76, no. 292 (June 2002): 397–412. http://dx.doi.org/10.1017/s0003598x00090517.
Dissertations / Theses on the topic "Techniques de retouche":
Dang, Thanh Trung. "Approche perceptuelle pour la retouche d'images : Algorithmes, évaluation et détection." Thesis, Paris 13, 2014. http://www.theses.fr/2014PA132004/document.
Image inpainting technique has emerged as one of the efficient solutions for restoring degraded images and even video and 3D visual contents. It is essential for restoration and conservation of archeological objects. Indeed, during the excavation of historic sites, many valuable artifacts such as statues, buildings, wall paintings, etc., have been unearthed and recovered. Unfortunately, most of them have been damaged or fractured in ancient times. With the aim to learn from these objects, digital techniques are used to restore them using some a priori knowledge provided by archeologists and artists. This helps to reconstruct, preserve and maintain these valuable artistic works. Recently, advances of computer technology and image acquisition systems made possible the transition from traditional manual retouching methods to digital techniques. It has opened up a very new and interesting research field within image processing, namely digital image inpainting.In this thesis, our work aims at analyzing and reviewing the state-of-the-art methods for image inpainting. Three groups of inpainting methods are identified. The advantages and drawbacks of each approach are analyzed using objective and subjective criteria. Based on this review, a new approach of image inpainting is introduced and compared to literature. The proposed method provides good performance in terms of quality and computation efficiency. Another contribution lies in the proposal of a new quality metric dedicated to image inpainting. To the best of our knowledge the inpainted images are very often evaluated subjectively or by means of some objective metrics far from being adapted to the peculiarities of image inpainting criteria. The last contribution of this work is a less investigated problem related to inpainting detection. This is motivated by the fact that, due to extensive research and rapid growth of technology, the output quality of inpainting algorithms became more than ever realistic and sophisticated. The inpainted regions are hard to detect by viewers, even for experts. As a result, these inpainted images could be used for different purposes, including digital tampering. Therefore, the last topic of the work is devoted to inpainting detection, also seen as an inverse problem of inpainting. Although, many papers have been introduced for forgery detection, there is almost no study about image inpainting forgery. Accordingly, a novel approach for inpainting detection is introduced based on the knowledge gathered in the previous steps of the thesis. Finally, the performance of proposed solutions is carefully evaluated with regards to human judgment as well as in comparison with the existing methods though a series of experimental studies
Theljani, Anis. "Partial differential equations methods and regularization techniques for image inpainting." Thesis, Mulhouse, 2015. http://www.theses.fr/2015MULH0278/document.
Image inpainting refers to the process of restoring a damaged image with missing information. Different mathematical approaches were suggested to deal with this problem. In particular, partial differential diffusion equations are extensively used. The underlying idea of PDE-based approaches is to fill-in damaged regions with available information from their surroundings. The first purpose of this Thesis is to treat the case where this information is not available in a part of the boundary of the damaged region. We formulate the inpainting problem as a nonlinear boundary inverse problem for incomplete images. Then, we give a Nash-game formulation of this Cauchy problem and we present different numerical which show the efficiency of the proposed approach as an inpainting method.Typically, inpainting is an ill-posed inverse problem for it most of PDEs approaches are obtained from minimization of regularized energies, in the context of Tikhonov regularization. The second part of the thesis is devoted to the choice of regularization parameters in second-and fourth-order energy-based models with the aim of obtaining as far as possible fine features of the initial image, e.g., (corners, edges, … ) in the inpainted region. We introduce a family of regularized functionals with regularization parameters to be selected locally, adaptively and in a posteriori way allowing to change locally the initial model. We also draw connections between the proposed method and the Mumford-Shah functional. An important feature of the proposed method is that the investigated PDEs are easy to discretize and the overall adaptive approach is easy to implement numerically
Fasser, Nicolò. "Lithic armatures manufacture during the Late Glacial and the beginning of the Early Holocene between North-Eastern Italy and South-Western France : production methods and techniques." Electronic Thesis or Diss., Toulouse 2, 2022. http://www.theses.fr/2022TOU20016.
This Ph.D thesis focuses on manufacturing modalities of lithic armatures during the Late Glacial and the first part of the Early Holocene in two specific areas: North-Eastern Italy and South-Western France. These two regions and more generally the Western-Atlantic and Mediterranean-Balkan areas are characterized, after the Gravettian period, by a clear cultural separation. The aim of this project was to contribute to the definition of the cultural framework in these two regions trying to emphasise variations and/or continuity into each chrono-cultural sequence and possible common trends between the two analysed territories. To answer this question, armatures from six sites located in South-Western France and North-Eastern Italy have been analysed. For the Italian area we selected three Late Epigravettian sites, and a Sauveterrian one, spanning from the latest part of the Oldest Dryas (GS-2a) to the beginning of the Early Holocene. For the French area we choose two multi-layered sites referring to the Upper Magdalenian, Early and Late Azilian and Early Laborian. Armatures were examined by applying a specifically designed methodology. This is based on two complementary approaches, an experimental and a technological one. Both were aimed at reconstructing the whole chaîne opératoire of armatures manufacture, from blanks selection to retouch methods and techniques. The latter were identified by combining a low and high magnifications analysis and a quantitative approach creating a new protocol for the study of lithic backed armatures. Applying this type of analysis allowed observing the variability of Late Glacial armatures in a new light. Despite the considerable morpho-functional divergences among armatures from the two territories analysed, common transformations concerning blanks selection and both retouch methods and techniques were recorded, suggesting the presence of important social networks linking Eastern and Western societies across time
Questa tesi di dottorato si concentra sulle modalità di fabbricazione delle armature litiche durante il Tardoglaciale e l’inizio del primo Olocene in due aree specifiche: l’Italia nord-orientale e la Francia sud-occidentale. Fin dai primi studi della fine del XIX e l’inizio del XX secolo, la variabilità tipologica delle armature litiche dopo il Gravettiano ha permesso di stabilire una divisione culturale tra le regioni atlantico-occidentali e quelle mediterraneo-balcaniche. La prima ha visto il susseguirsi di diverse culture (Solutreano, Badegouliano, Maddaleniano, Aziliano e Laboriano), mentre la seconda è caratterizzata da una maggiore continuità culturale che ha portato allo sviluppo dell’Epigravettiano antico e recente. All’inizio dell’Olocene entrambe le aree studiate presentano evidenze riferibili al Sauveterriano.L’obiettivo di questo progetto di ricerca è di contribuire alla definizione del quadro culturale di queste due regioni è di verificare se a questa chiara diversità morfo-tipologica corrisponde una differenza nelle modalità di produzione e in particolare nella selezione dei supporti, nei metodi e nelle tecniche di ritocco. Per raggiungere tale obiettivo sono state analizzate le armature di due siti della Francia sud-occidentale e di quattro dell’Italia nord-orientale. Per l’area italiana sono stati selezionati siti dell’Epigravettiano recente e del Sauveterriano localizzati in Friuli e nelle Prealpi e Alpi venete datati tra la fine del Dryas antico (GS-2a) e l’inizio dell’Olocene (17.000-10.000 cal BP). Per quanto riguarda l’area francese, invece, abbiamo scelto due siti pluristratificati che coprono approssimativamente lo stesso arco cronologico di quelli italiani e si riferiscono al Magdaleniano superiore, all’Aziliano antico e recente e al Laboriano antico. Non è stato possibile analizzare armature riferibili al Laboriano recente e al Sauveterriano francese.Le armature sono state studiate tramite una metodologia appositamente elaborata. Quest’ultima si basa su due approcci complementari, uno sperimentale e uno tecnologico. Entrambi mirano a ricostruire l’insieme delle catene operative che portano alla produzione delle armature. Sono state realizzate tre principali sessioni sperimentali: la prima è stata dedicata alle tecniche di ritocco, la seconda alla tecnica del microbulino e la terza all’identificazione di altre tecniche utili ad ottenere una fratturazione controllata del supporto. In seguito, il campione sperimentale è stato esaminato combinando un’analisi a basso e alto ingrandimento e un analisi quantitativa. Si è quindi elaborato un approccio integrato spesso utilizzato nell’ambito dell’analisi funzionale, ma raramente applicato per la ricostruzione delle modalità di fabbricazione di strumenti litici.L’applicazione di questa metodologia ha permesso di osservare la variabilità delle armature sotto una nuova luce. I risultati delle analisi effettuate indicano che nonostante le notevoli differenze da un punto di vista morfo-funzionale tra le armature delle due aree prese in esame, molteplici sono i punti in comune. Questi riguardano soprattutto le modalità di selezione dei 3 supporti, i metodi e le tecniche di ritocco, che in diversi periodi del Tardoglaciale sembrano seguire un trend simile. Sebbene i motivi di queste affinità tecnologiche potrebbero essere ricondotti alle dinamiche climatico-ambientali che colpiscono entrambe le regioni durante il Tardoglaciale e l’inizio dell’Olocene, la presenza degli stessi comportamenti tecnici su ampia scala non può che essere il risultato di un’importante rete di connessioni tra gruppi umani appartenenti a diverse culture
FASSER, NICOLÒ. "Lithic armatures manufacture during the Late Glacial and the beginning of the Early Holocene between North-Eastern Italy and South-Western France: production methods and techniques." Doctoral thesis, Università degli studi di Ferrara, 2022. http://hdl.handle.net/11392/2488461.
Questa tesi di dottorato analizza le modalità di fabbricazione delle armature litiche durante il Tardoglaciale e l’inizio del primo Olocene in due aree specifiche: l’Italia nord-orientale e la Francia sud-occidentale. Fin dai primi studi della fine del XIX e l’inizio del XX secolo, la variabilità tipologica delle armature litiche dopo il Gravettiano ha permesso di stabilire una divisione culturale tra le regioni atlantico-occidentali e quelle mediterraneo-balcaniche. La prima ha visto il susseguirsi di diverse culture (Solutreano, Badegouliano, Maddaleniano, Aziliano e Laboriano), mentre la seconda è caratterizzata da una maggiore continuità culturale che ha portato allo sviluppo dell’Epigravettiano antico e recente. All’inizio dell’Olocene entrambe le aree studiate presentano evidenze riferibili al Sauveterriano. L’obiettivo di questo progetto di ricerca è di contribuire alla definizione del quadro culturale di queste due regioni è di verificare se a questa chiara diversità morfo-tipologica corrisponde una differenza nelle modalità di produzione e in particolare nella selezione dei supporti e nei metodi e nelle tecniche di ritocco. Per raggiungere questo obiettivo sono state analizzate le armature di due siti della Francia sud-occidentale e di quattro dell’Italia nord-orientale. Per l’area italiana sono stati selezionati siti dell’Epigravettiano recente e del Sauveterriano localizzati in Friuli e nelle Prealpi e Alpi venete datati tra la fine del Dryas antico (GS-2a) e l’inizio dell’Olocene (17.000-10.000 cal BP). Per quanto riguarda l’area francese, invece, abbiamo scelto due siti pluristratificati che coprono approssimativamente lo stesso arco cronologico di quelli italiani e si riferiscono al Magdaleniano superiore, all’Aziliano antico e recente e al Laboriano antico. Non è stato possibile analizzare armature riferibili al Laboriano recente e al Sauveterriano francese. Le armature sono state studiate tramite una metodologia appositamente elaborata. Quest’ultima si basa su due approcci complementari, uno sperimentale e uno tecnologico. Entrambi mirano a ricostruire l’insieme delle catene operative che portano alla produzione delle armature. Sono state realizzate tre principali sessioni sperimentali: la prima dedicata alle tecniche di ritocco, la seconda alla tecnica del microbulino e la terza all’identificazione di altre tecniche utili ad ottenere una fratturazione controllata del supporto. In seguito, il campione sperimentale è stato esaminato combinando un’analisi a basso e alto ingrandimento e un analisi quantitativa. Si è quindi elaborato un approccio integrato spesso utilizzato nell’ambito dell’analisi funzionale, ma raramente applicato per la ricostruzione delle modalità di fabbricazione di strumenti litici. L’applicazione di questa metodologia ha permesso di osservare la variabilità delle armature sotto una nuova luce. I risultati delle analisi effettuate indicano che nonostante le notevoli differenze da un punto di vista morfo-funzionale tra le armature delle due aree prese in esame, molteplici sono i punti in comune. Questi riguardano soprattutto le modalità di selezione dei supporti, i metodi e le tecniche di ritocco, che in diversi periodi del Tardoglaciale sembrano seguire un evoluzione simile. Sebbene i motivi di queste affinità tecnologiche potrebbero essere ricondotti alle dinamiche climatico-ambientali che colpiscono entrambe le regioni durante il Tardoglaciale e l’inizio dell’Olocene, la presenza degli stessi comportamenti tecnici su ampia scala non può che essere il risultato di un’importante rete di connessioni tra i gruppi umani delle regioni atlantico-occidentali e quelle mediterraneo-balcaniche.
Whyte, Oliver. "Removing camera shake blur and unwanted occluders from photographs." Phd thesis, École normale supérieure de Cachan - ENS Cachan, 2012. http://tel.archives-ouvertes.fr/tel-00719092.
Books on the topic "Techniques de retouche":
Celmat, Yannick. Photoshop CS3: Retouche photo : les techniques de pro. Saint-Herblain: E d. ENI, 2008.
Robert, Dimitri. Gimp 2.4: Débuter en retouche photo et graphisme libre. Paris: Eyrolles, 2007.
Robert, Dimitri. Gimp 2.4: De buter en retouche photo et graphisme libre. 3rd ed. Paris: Eyrolles, 2008.
Robert, Dimitri. Gimp 2.6: De buter en retouche photo et graphisme libre. 4th ed. Paris: Eyrolles, 2009.
Evening, Martin. Photoshop CS pour les photographes. Paris: Eyrolles, 2004.
Evening, Martin. Photoshop CS pour les photographes: [manuel de formation pour les professionnels de l'image]. Paris: Éditions Eyrolles, 2005.
Beene, Carrie. Real retouching: A professional step-by-step guide. Burlington, MA: Focal Press, 2011.
Freeman, Michael. 101 trucs et astuces pour la photo numérique. [Paris]: Person, 2008.
Obermeier, Barbara. Photoshop Elements 9 pour les nuls. Paris: First interactive, 2011.
Labbe, Pierre. Photoshop CS3: Pour PC et Mac. Paris: Eyrolles, 2007.
Book chapters on the topic "Techniques de retouche":
Beegan, Gerry. "The Picturegoer: Cinema, Rotogravure, and the Reshaping of the Female Face." In Women's Periodicals and Print Culture in Britain, 1918-1939. Edinburgh University Press, 2018. http://dx.doi.org/10.3366/edinburgh/9781474412537.003.0015.
Conference papers on the topic "Techniques de retouche":
Marcattili, Letizia, and Maria Canavan. "Retouching a Retouched Painting: Evaluation and re-treatment of historic retouchings in the conservation of a painting by Lavinia Fontana." In RECH6 - 6th International Meeting on Retouching of Cultural Heritage. València: Editorial Universitat Politècnica de València, 2021. http://dx.doi.org/10.4995/rech6.2021.13544.
Noohi, Sahar, and Manijeh Hadian-Dehkordi. "A TECHNICAL STUDY OF RED PAINTS IN THE RETOUCHING LAYER OF SOME WET-COLLODION GLASS PLATE NEGATIVES OF GOLESTAN PALACE PHOTO ARCHIVE." In RECH6 - 6th International Meeting on Retouching of Cultural Heritage. València: Editorial Universitat Politècnica de València, 2021. http://dx.doi.org/10.4995/rech6.2021.13624.