Academic literature on the topic 'TANNER TOOL'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'TANNER TOOL.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "TANNER TOOL"
V.P, Visanthi. "FULL ADDER CIRCUIT DESIGN WITH LOW POWER AND HIGH SPEED AT 0.25µM CMOS TECHNOLOGY USING TANNER EDA." International Journal Of Trendy Research In Engineering And Technology 07, no. 01 (2023): 46–48. http://dx.doi.org/10.54473/ijtret.2023.7109.
Full textNagpara, Bharat H. "A 45 nm 6 Bit Low Power Current Steering Digital to Analog Converter Using GDI Logic." TELKOMNIKA Indonesian Journal of Electrical Engineering 16, no. 1 (October 1, 2015): 46. http://dx.doi.org/10.11591/tijee.v16i1.1586.
Full text., Harsh Raj. "POWER ANALYSIS OF 4T SRAM BY STACKING TECHNIQUE USING TANNER TOOL." International Journal of Research in Engineering and Technology 03, no. 07 (July 25, 2014): 164–66. http://dx.doi.org/10.15623/ijret.2014.0307028.
Full textErnst, Andreas, Lea Lykke B. Lauridsen, Nis Brix, Camilla Kjersgaard, Jørn Olsen, Erik T. Parner, Niels Clausen, Lars Henning Olsen, and Cecilia H. Ramlau-Hansen. "Self-assessment of pubertal development in a puberty cohort." Journal of Pediatric Endocrinology and Metabolism 31, no. 7 (July 26, 2018): 763–72. http://dx.doi.org/10.1515/jpem-2018-0178.
Full textCheuiche, Amanda Veiga, Letícia Guimarães da Silveira, Iara Regina Siqueira Lucena, Marcia Puñales, Fabiola Costenaro, Cristiane Kopacek, Sandra Pinho Silveiro, and Leila Pedroso de Paula. "Doppler Assessment of the Uterine Arteries for the Definition of Pubertal Onset in Girls." Journal of the Endocrine Society 5, Supplement_1 (May 1, 2021): A666. http://dx.doi.org/10.1210/jendso/bvab048.1359.
Full textJuckett, Lisa, Elizabeth Schmidt, Hillary Richardson, Elizabeth G. Hunter, Susan Cahill, Deborah Lieberman, Kelly Jane Tanner, and Aimee Piller. "Translating Evidence to Practice: Development and Dissemination of AOTA’s Knowledge Translation Toolkit." American Journal of Occupational Therapy 76, Supplement_1 (July 1, 2022): 7610510019p1. http://dx.doi.org/10.5014/ajot.2022.76s1-rp19.
Full textGoel, Chakshu, Puneet Jain, and Gurjeevan Singh. "Design and Simulation of Low power CMOS Adder Cell at 180nm using Tanner Tool." International Journal of Computer Applications 62, no. 16 (January 18, 2013): 30–33. http://dx.doi.org/10.5120/10166-4958.
Full textRajasekar, B., and K. Ashokkumar. "Low Power 4×4 Bit Multiplier Design Using DADDA, WALLACE Algorithm and Gate Diffusion Input Technology Kotha Vinil Kumar Reddy, Kondamuri Venkata Bala Manikanta Abhinav,." Journal of Computational and Theoretical Nanoscience 16, no. 8 (August 1, 2019): 3359–66. http://dx.doi.org/10.1166/jctn.2019.8220.
Full textMs. Amruta Bijwar. "CMRR Boosted Instrumentation Amplifier for Biomedical Application." International Journal of New Practices in Management and Engineering 2, no. 04 (December 31, 2013): 01–06. http://dx.doi.org/10.17762/ijnpme.v2i04.21.
Full textRafferty SJ, Oliver P. "Rowan Williams’ Ecumenical Theology: a Response to Dame Mary Tanner." Ecclesiology 8, no. 2 (2012): 184–99. http://dx.doi.org/10.1163/174553112x630453.
Full textDissertations / Theses on the topic "TANNER TOOL"
Wiles, Brenda L. "Using The National Early Warning Score As A Set Of Deliberate Cues To Detect Patient Deterioration And Enhance Clinical Judgment In Simulation." Case Western Reserve University Doctor of Nursing Practice / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=casednp1458074763.
Full textThorwaldsson, Henrik. "Development of asphalt removing tool for a tandem roller." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-2601.
Full textDen här uppsatsen handlar om olika koncept som kan lösa problem som är kopplade till vibrationer från tandem vältar. Huvudproblemet som har varit i fokus är att vibrationerna från valsen försvårar möjligheten att ta bort asfalt med den inbyggda skrapan. Detta ger en ojämn kontakt mellan skrapan och valsen. De nya koncepten borde förbättra maskinen förmåga att ta bort asfalt och minska det nödvändiga underhållet. För att förstå vad det nya verktyget behöver göra har det gjort funktionsanalyser. För att genera nya koncepts har verktyget triz använts. De olika konceptet har utvärderats med en pugh matris och swot metoden. Sista delen av arbetet handlar om hur den bästa konceptet kan bli bättre. The slutgiltiga förslaget går ut på att man låser skrapa geometriskt så att den rör sig på samma sätt som valsen. Detta gör att den alltid håller sig på samma avstånd till valsen.
Karaindros, Athanasios A. (Athanasios Andreas). "Decision support tool for the tanker second-hand market using data mining techniques." Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/33898.
Full textLeaf 78 blank.
Includes bibliographical references (leaves 74-77).
This thesis proposes an innovative decision support tool intended for market leaders and those anticipating market states of "sale and purchase". This is feasible with the use of powerful data mining techniques and the construction of explanatory forecasting models. Data mining techniques seek and extract patterns from databases. These patterns can be used to reveal possible interactions between database variables and to predict values for future "sale and purchase" market states as an aid to decision-making. Possible: users of such a tool are ship brokers, ship owners, shipyards and general brokers and investors. It is crucial to mention the rising need for decisional tools especially when asset play in shipping seems to increase its proportion among other investment practices.
by Athanasios A. Karaindros.
S.M.
Newton, Annabella. "Combining two directional synthesis and tandem reactions : powerful tools for synthesis." Thesis, University of Nottingham, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.523570.
Full textSaccani, Michele. "Whole ship energy optimization: the case study of a chemical tanker." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2013. http://amslaurea.unibo.it/6324/.
Full textVestlund, Emelie. "Surfplattan tar plats i förskolan : En kommuns tankar och pedagogernas verklighet." Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-31162.
Full textThe study is an investigating of a municipality’s work with implementations of tablet computer in preschool, and the pedagogues’ experience of the new technique. In the study the pedagogues’ experiences of the tablet computers are illuminated. Quantitative interviews were used to receive the required information, since it is a principal method applicable for this study. The result shows that the municipality did not have any plans for how the work with the tablet computers in preschool was going to proceed. It is also obvious that the pedagogues don’t have the competence nor the work plan to use the tablet computer as a pedagogical tool. The pedagogues are mentioning lack of time as a contributory factor in the matter. The conclusion is that the tablet computer, obtained two years ago, has not been implemented in the daily work. There is a lack in both continuity and work plan when it comes to the tablet computer according to my study.
Kaymaz, Sidar Diri Alaattin. "Use of information technology tools in source selection decision making a study on USAF's KC-X Tanker Replacement Program /." Monterey, Calif. : Naval Postgraduate School, 2008. http://handle.dtic.mil/100.2/ADA483510.
Full textAdvisor(s): Heath, Susan K. ; Petross, Diana F. "June 2008." "MBA professional report"--Cover. Description based on title screen as viewed on August 8, 2008. Includes bibliographical references (p. 149-152). Also available in print.
Kaymaz, Sidar, and Alaattin Diri. "Use of information technology tools in source selection decision making: a study on USAF's KC-X Tanker Replacement Program." Thesis, Monterey, California. Naval Postgraduate School, 2008. http://hdl.handle.net/10945/10340.
Full textApproved for public release; distribution is unlimited
The source selection phase in government acquisitions is so complicated in nature because it involves multicriteria decision making that is supposed to respond to various requirements and subjectivity is usually inevitable in this kind of a decision making process. The purpose of this project is to demonstrate how the USAF's current source selection method (color rating method) is incompetent in showing small differences between proposed products, how this inadequacy leads to subjective decisions, and that the use of information technology tools can augment objectivity in this process. In this study, USAF's KC-X Tanker Replacement Program has been selected as the program to be used to frame the research questions. Two models with two versions built on Microsoft Excel spreadsheets using publicly available KC-X program data are used to compare the USAF's color rating method and weighted sum method, which is a multi-criteria decision making tool. It is presented that if the USAF had used the weighted sum method as its evaluation method, the winner of the KC-X program could have been different. The findings prove that the color rating method is not capable of reflecting small differences and information technology tools can help decision makers choose the best value offeror with less subjectivity.
Sreng, Mengkoing. "Development of in-situ photoluminescence characterization tools for the study of semiconductors for photovoltaics application." Thesis, Institut polytechnique de Paris, 2019. http://www.theses.fr/2019IPPAX003.
Full textDuring the last few decades, the conversion efficiency of photovoltaic solar cell has been significantly improved, almost reaching the Shockley-Queisser theoretical limit. At this point, a profound understanding of material properties and its evolution during the solar cell fabrication processes become increasingly crucial to further improve the cell conversion efficiency. For this reason, my doctoral studies have been focused on the development of in-situ characterization tools, which allows the studies of material properties in real time during the processes. The tools were developed based on photoluminescence techniques, in which the sample (semiconductor materials) is optically excited and simultaneously emits photons with energy approximately equal to the band gap of materials. In this thesis, three in-situ characterization tools will be presented.In-situ SSPL, based on steady-state photoluminescence technique, is developed to study the properties of semiconductor materials during the processes by directly measuring the steady-state PL intensity. After the upgrade of optical acquisition system, the tool has been used extensively to study the evolution of surface properties of crystalline silicon wafer, passivated by aluminum oxide (Al2O3) grown by atomic layer deposition (ALD) and hydrogenated amorphous silicon (a-Si:H) grown by plasma-enhanced chemical vapor deposition (PECVD), under Ar/H2 plasma exposure at different conditions. From these experiments, the behavioral differences between Al2O3-passivated sample and a-Si:H-passivated sample was observed and discussed. In addition, thanks to the plasma exposure experiment through a magnesium fluoride optical window (MgF2), the root cause of plasma-induced degradation of surface passivation was pin-pointed. Last but not least, the relationship between the dynamic of plasma-induced degradation and the plasma parameters (e.g. applied RF power, chamber pressure, and temperature) was also studied.To go one step further, in-situ MPL, based on modulated photoluminescence technique, is built to quantitatively study the properties of semiconductor materials. This characterization tool employs an intensity-modulated laser to excite the sample, so the minority carrier lifetime can be measured. After the conceptualization and fabrication of a new optical acquisition system, the system calibration and the optimization of MPL parameters were conducted. Furthermore, a characterization method was also developed, so the in-situ MPL is able to measure the minority carrier lifetime at a defined minority carrier density (e.g. 1015 cm-3 for non-concentrated single junction solar cell). After a lot of work, the tool is now fully functional and has been used to measure the minority carrier lifetime of crystalline silicon wafer during the de position of a-Si:H passivation layer, the thermal treatment, and the deposition of hydrogenated amorphous silicon nitride (a-SiNx:H) anti-reflection coating. The experimental results show that the temperature at which the processes were conducted plays a major role in activation and modification of surface passivation properties provided by Al2O3.Finally, as the tendency toward tandem solar cell has been continuously growing, another in-situ characterization tool, known as in-situ PLt (in-situ photoluminescence for tandem solar cell), was built. This characterization tool results from a combination of steady-state photoluminescence and modulated photoluminescence technique and was designed to study in real time the properties of both sub-cells independently and simultaneously. The in-situ PLt can be a potential characterization tool for the research toward high efficiency tandem solar cell
Furst, Kristina. ""Vi försöker att få in det i vardagen" : en kvalitativ studie om förskollärares tankar kring pedagogisk dokumentation i förskolan." Thesis, Södertörns högskola, Lärarutbildningen, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-14774.
Full textBakgrund: Pedagogisk dokumentation ska idag användas som ett naturligt inslag i den pedagogiska verksamheten enligt den reviderade läroplanen för förskolan. Syfte: Syftet med studien är att se hur förskollärare uppfattar och definierar pedagogisk dokumentation i förskolan. Syftet är även att se vilka möjligheter och hinder som kan uppstå kring pedagogisk dokumentation. Metod: Studien har genomförts utefter en kvalitativ metod med enkäter för att nå ut till fler förskollärare och på så sätt få en bredare bild av ämnets innehåll. Utifrån en fenomenologisk ansats har jag tagit hänsyn till förskollärarnas upplevelse och uppfattning av pedagogisk dokumentation och konstruerat det till min egen tolkning. Resultat: Av resultatet framgår att pedagogisk dokumentation är ett viktigt verktyg i förskollärarna arbete som inte enbart visar sig innehålla en produkt, utan framstår mer som en samling av en hel del produkter som ska föras samman till en helhet.
Books on the topic "TANNER TOOL"
Toll call. New York: Villard Books, 1987.
Find full textLoredo, Elvira N. Programmed depot maintenance capacity assessment tool: Workloads, capacity, and availability. Santa Monica, CA: RAND, 2007.
Find full textGreenleaf, Stephen. Toll Call. Ballantine Books, 1994.
Find full textGreenleaf, Stephen. Toll Call. MysteriousPress.com, 2016.
Find full textTenold, Stig. Tankers in Trouble. Liverpool University Press, 2006. http://dx.doi.org/10.5949/liverpool/9780973893427.001.0001.
Full textRitter, Julia M. Tandem Dances. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780190051303.001.0001.
Full textLoredo, Elvira N. Programmed Depot Maintenance Capacity Assessment Tool: Workloads, Capacity, and Availability. RAND Corporation, 2007.
Find full textSongster, E. Elena. Introduction. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780199393671.003.0001.
Full textBunik, Maya. Breastfeeding Telephone Triage and Advice. American Academy of Pediatrics, 2012. http://dx.doi.org/10.1542/9781581107630.
Full textHarik, Ramy, and Joseph Elias Khoury. Manufacturing versus Corruption: Who Wins? SAE International, 2021. http://dx.doi.org/10.4271/9781468603590.
Full textBook chapters on the topic "TANNER TOOL"
Heindl, Armin. "Decomposition of General Tandem Queueing Networks with MMPP Input." In Computer Performance Evaluation.Modelling Techniques and Tools, 86–100. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/3-540-46429-8_7.
Full textAlmazova, Nadezhda, Anna Rubtsova, Yuri Eremin, Nora Kats, and Irina Baeva. "Tandem Language Learning as a Tool for International Students Sociocultural Adaptation." In Integrating Engineering Education and Humanities for Global Intercultural Perspectives, 174–87. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-47415-7_19.
Full textCeuterick, Maud. "Women’s Road Movies and Affirmative Wandering: Messidor." In Affirmative Aesthetics and Wilful Women, 37–56. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-37039-8_2.
Full textHuber, Michael, Philipp Ebel, and Helmut Krcmar. "Technische Umsetzung der TANDEM-Community - Ein IT- Tool zur gemeinschaftlichen Erstellung von Geschäftsmodellen." In Innovieren im demografischen Wandel, 127–41. Wiesbaden: Springer Fachmedien Wiesbaden, 2015. http://dx.doi.org/10.1007/978-3-658-10868-7_7.
Full textJýlich, Theo, Markus Miller, and Lars Fiegenbaum. "Application of Tandem Scanning Microscopy to the Non-destructive Investigation of Tool Marks on Historic Ivory Carvings." In Optical Technologies in the Humanities, 207–10. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-60872-8_30.
Full textGilbert, John D., Timothy V. Olah, and Debra A. McLoughlin. "High-Performance Liquid Chromatography with Atmospheric Pressure Ionization Tandem Mass Spectrometry as a Tool in Quantitative Bioanalytical Chemistry." In ACS Symposium Series, 330–50. Washington, DC: American Chemical Society, 1996. http://dx.doi.org/10.1021/bk-1995-0619.ch017.
Full textGarcía-Álvarez, David, and Javier Lara Hinojosa. "Global Thematic Land Use Cover Datasets Characterizing Vegetation Covers." In Land Use Cover Datasets and Validation Tools, 373–98. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-90998-7_19.
Full textGomes, Laidson Paes, Catarina Gouveia e Silva, Jean-Charles Gaillard, Jean Armengaud, and Ana Varela Coelho. "Characterization of Soluble Cell-Free Coelomic Fluid Proteome from the Starfish Marthasterias glacialis." In Methods in Molecular Biology, 583–97. New York, NY: Springer US, 2022. http://dx.doi.org/10.1007/978-1-0716-2172-1_31.
Full textLerpold, Lin, and Örjan Sjöberg. "Urban Advantage? Sustainable Consumption and Ontological Cityism Across the Urban Hierarchy." In Sustainable Consumption and Production, Volume I, 263–82. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-56371-4_14.
Full textMocwagae, Kgosi, and Thulisile Mphambukeli. "Planning for Effective and Sustainable Water Access and Provision in QwaQwa Through the UN Sustainable Development Goals." In Sustainable Development Goals Series, 105–26. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-15773-8_8.
Full textConference papers on the topic "TANNER TOOL"
Dhande, A. P., Satish S. Narkhede, and Shridhar S. Dudam. "VLSI implementation of ternary gates using Tanner Tool." In 2014 2nd International Conference on Devices, Circuits and Systems (ICDCS). IEEE, 2014. http://dx.doi.org/10.1109/icdcsyst.2014.6926187.
Full textKommana, Deepak, G. A. E. Satish Kumar, R. Phani Vidyadhar, Mahalakshmi Bellamkonda, and Saikethan Goundla. "Implementation of PMOS Biased Sense Amplifier Using Tanner EDA tool." In 2023 4th International Conference for Emerging Technology (INCET). IEEE, 2023. http://dx.doi.org/10.1109/incet57972.2023.10170696.
Full textGrover, Amit. "Low Power 7-T SRAM Using 90 NM Technology with Tanner Tool." In 2013 1st International Conference on Artificial Intelligence, Modelling & Simulation (AIMS). IEEE, 2013. http://dx.doi.org/10.1109/aims.2013.85.
Full textKumar, M. Siva, Syed Inthiyaz, T. Srinivasa Rao, G. R. K. Prasad, ParasuSai Prasanthi, Karamsetty Venkata Mourya, and CH Sai Krishna. "Techniques for leakage power reduction using not and nand logic gates in tanner tool." In 1ST INTERNATIONAL CONFERENCE ON ADVANCES IN SIGNAL PROCESSING, VLSI, COMMUNICATIONS AND EMBEDDED SYSTEMS: ICSVCE-2021. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0074228.
Full textAmeer Abbas, S. Syed, P. Vishnoo Priyaa, and A. Vinitha. "A Novel Approach for Better Throughput in Near Field Communication Built by Ternary QAM using Tanner Tool." In 2019 International Conference on Communication and Signal Processing (ICCSP). IEEE, 2019. http://dx.doi.org/10.1109/iccsp.2019.8697937.
Full textCorrêa, Diego C., Allan C. de Oliveira, Eduardo A. Tannuri, and Sergio H. Sphaier. "Comprehensive Downtime Analysis of DP-Assisted Offloading Operation of Spread Moored Platforms in Brazilian Waters." In ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/omae2013-10405.
Full textKoop, Arjen, Christiaan Klaij, and Guilherme Vaz. "Predicting Wind Loads for FPSO Tandem Offloading Using CFD." In ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2010. http://dx.doi.org/10.1115/omae2010-20284.
Full textAlHosni, Fahad, Edgar Echevarria, Alexey Ruzhnikov, and Luis Rojas. "Understanding Drilling Dynamics Thru Tandem Downhole Recording Tools Enabled Drilling Performance: Middle East Specific." In SPE/IADC Middle East Drilling Technology Conference and Exhibition. SPE, 2023. http://dx.doi.org/10.2118/214651-ms.
Full textAlHosni, Fahad, Edgar Echevarria, Alexey Ruzhnikov, and Luis Rojas. "Understanding Drilling Dynamics Thru Tandem Downhole Recording Tools Enabled Drilling Performance: Middle East Specific." In SPE Canadian Energy Technology Conference and Exhibition. SPE, 2023. http://dx.doi.org/10.2118/212801-ms.
Full textYechiali, Uri. "Tandem stochastic systems." In VALUETOOLS 2019: 12th EAI International Conference on Performance Evaluation Methodologies and Tools. New York, NY, USA: ACM, 2019. http://dx.doi.org/10.1145/3306309.3306312.
Full textReports on the topic "TANNER TOOL"
Kaymaz, Sidar, and Alaattin Diri. Use of Information Technology Tools in Source Selection Decision Making: A Study on USAF's KC-X Tanker Replacement Program. Fort Belvoir, VA: Defense Technical Information Center, June 2008. http://dx.doi.org/10.21236/ada483198.
Full textMinor, Peter, and Terrie Walmsley. MyGTAP: A Program for Customizing and Extending the GTAP Database for Multiple Households, Split Factors, Remittances, Foreign Aid and Transfers. GTAP Working Paper, December 2013. http://dx.doi.org/10.21642/gtap.wp79.
Full textWalmsley, Terrie, and Peter Minor. MyGTAP Model: A Model for Employing Data from the MyGTAP Data Application—Multiple Households, Split Factors, Remittances, Foreign Aid and Transfers. GTAP Working Paper, December 2013. http://dx.doi.org/10.21642/gtap.wp78.
Full textFunkenstein, Bruria, and Cunming Duan. GH-IGF Axis in Sparus aurata: Possible Applications to Genetic Selection. United States Department of Agriculture, November 2000. http://dx.doi.org/10.32747/2000.7580665.bard.
Full text