Relevant bibliographies by topics / Synthetic loading

Academic literature on the topic 'Synthetic loading'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Synthetic loading.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Synthetic loading"

1

Hennessey, C. M., N. J. Pearson, and R. H. Plaut. "Experimental Snap Loading of Synthetic Ropes." Shock and Vibration 12, no. 3 (2005): 163–75. http://dx.doi.org/10.1155/2005/734345.

Full text
Abstract:
Large tensile forces, known as snap loads, can occur when a slack rope becomes taut. Such forces may damage the rope or masses connected to it. Experiments are described in which one end of a rope is attached to the top of a drop tower and the bottom end is attached to a weight. The weight is raised to a certain height and then released. The force at the top of the rope and the acceleration of the weight are recorded during the first snap load that occurs. Repeated drop tests are performed on each rope. The effects of the type of rope, drop height, drop weight, whether the rope has been subjected to static precycling, and the number of previous dynamic tests are examined. A mathematical model is proposed for the rope force as a function of the displacement and velocity of the weight.
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Xiaowei, Qun Wei, Xiaojie Tu, Yuxuan Zhu, Yanfei Chen, Lina Guo, Jun Zhou, and Hongyun Sun. "Effects of nutrient loading on Anabaena flos-aquae biofilm: biofilm growth and nutrient removals." Water Science and Technology 74, no. 2 (April 30, 2016): 385–92. http://dx.doi.org/10.2166/wst.2016.208.

Full text
Abstract:
Effects of three different nutrient loadings (low nutrient loading, medium nutrient loading and high nutrient loading, denoted as LNS, MNS and HNS, respectively) on the structure and functions of algal biofilm using Anabaena flos-aquae were investigated using synthetic wastewater. Nutrients removal efficiencies, biofilm thickness, microalgae dehydrogenase activity (DHA) and exopolysaccharide (EPS) productions were examined. Results showed that the changes of nutrient concentration were insignificant after 4 days of experiment for the case of HNS condition; 9 days for the case of MNS condition, and 6 days for the case of LNS condition, respectively. The biofilm thickness, nutrient removal efficiencies, algae DHA and EPS productions increased with the increase of nutrient loadings in synthetic wastewater. For the case of HNS condition, the microalgal biofilm exhibited the best performance in terms of C, N and P removal efficiencies, reaching the removal rates of 68.45, 3.56 and 1.61 mg·L−1·d−1 for C, N, P, respectively. This was likely because, fact with the high nutrient loading, the high biological activity could be achieved, thus resulting in high nutrient removals. The thickness of the biofilm in HNS condition was 75 μm, which was closely related to EPS production. DHA and EPS concentrations were 7.24 and 1.8 × 10−2 mg·mm−2, respectively. It was also shown that apart from the nutrient loading, the structure and functions of microalgal biofilm were also influenced by other factors, such as illumination and temperature.
APA, Harvard, Vancouver, ISO, and other styles
3

Naknikham, Usuma, Giuliana Magnacca, Ang Qiao, Peter Kjær Kristensen, Vittorio Boffa, and Yuanzheng Yue. "Phenol Abatement by Titanium Dioxide Photocatalysts: Effect of The Graphene Oxide Loading." Nanomaterials 9, no. 7 (June 29, 2019): 947. http://dx.doi.org/10.3390/nano9070947.

Full text
Abstract:
Hetero-photocatalytic graphene-TiO2 materials have, in the literature, been found to possess better photocatalytic activity for environmental applications compared to pure TiO2. These types of materials can be prepared in different ways; however, their photocatalytic performance and quality are not easily controlled and reproduced. Therefore, we synthetized graphene oxide-TiO2 nanoparticles by sol-gel reaction from TiCl4, as precursor, with two different methods of synthesis and with a graphene oxide (GO) loading ranging from 0 to 1.0. This approach led to a good adhesion of GO to TiO2 through the Ti-O-C bonding, which could enhance the photocatalytic performances of the materials. Overall, 0.05 wt % GO loading gave the highest rate in the photodegradation of phenol under visible light, while higher GO loadings had a negative impact on the photocatalytic performances of the composites. The 0.05 wt % GO-TiO2 composite material was confirmed to be a promising photocatalyst for water pollutant abatement. The designed synthetic approach could easily be implemented in large-scale production of the GO-TiO2 coupling materials.
APA, Harvard, Vancouver, ISO, and other styles
4

Gu, Yanting, and Jilei Zhang. "Tensile Properties of Natural and Synthetic Rattan Strips Used as Furniture Woven Materials." Forests 11, no. 12 (December 3, 2020): 1299. http://dx.doi.org/10.3390/f11121299.

Full text
Abstract:
This study investigated factors on tensile properties of rattan strips commonly used as woven materials for furniture. The factors were rattan type (bast, core, synthetic), gauge length (100, 140 mm), and unit loading speed (0.1, 0.2, 0.3, 0.4, 0.5 mm/min/mm). Experimental results indicated that natural bast and core rattan strips, when subjected to tensile loading, behaved like synthetic rattan strips in terms of their stress-strain curves showing excessive plastic deformation. There was no significant difference in ultimate tensile strain between bast and synthetic rattan strips. Bast rattan strips had the highest ultimate tensile strength and modulus of elasticity among three materials evaluated in this study, followed by core rattan and synthetic strips. The major tensile properties of natural rattan bast strips can be influenced by their gauge length adapted to their evaluation test. Unit loading speeds, in general, had no significant effects on the major tensile properties of natural bast rattan strips but tended to significantly effect the ultimate strength of synthetic rattan strips, while less significantly for strengths at the proportional limit and yield point.
APA, Harvard, Vancouver, ISO, and other styles
5

Schoonheydt, R. A., and L. Heughebaert. "Clay adsorbed dyes: methylene blue on Laponite." Clay Minerals 27, no. 1 (March 1992): 91–100. http://dx.doi.org/10.1180/claymin.1992.027.1.09.

Full text
Abstract:
AbstractThe adsorption of methylene blue (MB) from aqueous solution on Laponite (a synthetic 2:1 layer-silicate) exchanged with Na+, Cs+ and tetraethylammonium ions has been studied. At low loadings the monomer form predominates, but as the loading increases dimers and trimers (or higher aggregates) are formed, the latter being the most important species when the loading is equal to, or larger than, the Na+-CEC. The distribution of the molecules over the surface is time-dependent due to changes in the aggregation of the clay particles. On Cs+-Laponite, and to a lesser extent on Na+-Laponite, a small amount of MB is protonated by cation-coordinated water molecules. In similar work where adsorption was from ethanolic solution, MB is adsorbed as monomers and dimers only at small loadings and precipitates on the surface of the clay aggregates at high loadings. These precipitates can be broken up by sonication.
APA, Harvard, Vancouver, ISO, and other styles
6

Yamaguchi, T., K. Kitajima, E. Sakai, and M. Daimon. "Synthesis and properties of aluminapillared fluorine micas having cation exchangeability." Clay Minerals 38, no. 1 (March 2003): 41–47. http://dx.doi.org/10.1180/0009855033810077.

Full text
Abstract:
AbstractAlumina-pillared fluorine micas were prepared from synthetic highly layer-charged expandable fluorine mica and polyhydroxoaluminium solutions under different solution loadings (Al mmol in solutions per 1.0 g mica) in order to clarify the effects of solution loading on thermal durability and microporous properties. The intercalated Al content of the pillared micas increased with increased solution loading. The intercalated Al content (i.e. the pillar density) of the pillared micas influenced both the thermal durability and specific surface areas of the pillared micas. The pillared micas obtained from the high solution loadings showed better thermal durability than those obtained from the low solution loadings. Through micropore formation upon heating, the pillared micas exhibit cation exchangeability due to the liberation of residual Na+ ions from steric hindrance in the interlayer pillaring space. The amount of the exchangeable ions depends on the heating temperature of the pillared micas.
APA, Harvard, Vancouver, ISO, and other styles
7

Sanders, C. J. "RESPONSES OF MALE SPRUCE BUDWORM MOTHS TO SEX PHEROMONE RELEASED FROM FILTER PAPER AND RUBBER SEPTA." Canadian Entomologist 122, no. 2 (April 1990): 263–69. http://dx.doi.org/10.4039/ent122263-3.

Full text
Abstract:
AbstractThe behavioral responses of male spruce budworm moths to a wide range of loadings of synthetic sex pheromone on filter paper and rubber septa were investigated in a wind tunnel. The highest proportion of males flying upwind and reaching filter-paper dispensers occurred at pheromone loadings of between 0.1 and 10 μg. Above these loadings, males were activated but upwind flight was arrested before the moths reached the pheromone source. No such arrestment occurred with rubber septa up to the maximum loading assayed, 1 mg. Up to 72% of the males that reached a septum attempted to copulate with it, but even this response was less than that to a septum in the presence of pheromone emitted by females. This confirms previous conclusions that the synthetic pheromone blend used here, 95:5 (E:Z-11-tetradecenal) is incomplete.
APA, Harvard, Vancouver, ISO, and other styles
8

Kobayashi, Hidetoshi, Keitaro Horikawa, Kenichi Tanigaki, and Kinya Ogawa. "Impact Compressive Fracture of Synthetic Quartz Accompanied by Electromagnetic Phenomenon." Key Engineering Materials 715 (September 2016): 13–20. http://dx.doi.org/10.4028/www.scientific.net/kem.715.13.

Full text
Abstract:
In order to clarify the relationship between the mechanical properties of synthetic quartz and the electromagnetic phenomena during its fracture, a series of uniaxial compression tests were carried out at quasi-static and dynamic rates. Not only the stress-strain curves but also the output of ferrite-core antenna located close to the specimens were measured in a shield box made of permalloy plates. Since the synthetic quartz has three characteristic axes, i.e. optical axis, electric axis and machine axis, the effect of loading direction on the mechanical properties and electromagnetic phenomena of quarts was also examined. The dynamic compressive strength was greater than those in static tests and there is strain-rate dependence in their strength of synthetic quartz. It was also found that there are not any remarkable differences due to the loading direction with respect to the intensity of electromagnetic waves measured in the dynamic compression tests, i.e. the electromagnetic phenomenon does not depend on the loading direction.
APA, Harvard, Vancouver, ISO, and other styles
9

Papadopoulou, Panagiota, Magnus Karlsteen, Magnus Gustafsson, and Erik Hulthén. "Investigation of Synthetic Clay Court’s Response under Cyclic Loading." Proceedings 2, no. 6 (February 13, 2018): 280. http://dx.doi.org/10.3390/proceedings2060280.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Abbas, A. Y. M., and J. E. Fletcher. "Synthetic loading applied to linear permanent magnet synchronous machines." IET Renewable Power Generation 4, no. 3 (2010): 221. http://dx.doi.org/10.1049/iet-rpg.2009.0146.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Synthetic loading"

1

Pearson, Nicholas John. "Experimental Snap Loading of Synthetic Fiber Ropes." Thesis, Virginia Tech, 2002. http://hdl.handle.net/10919/30925.

Full text
Abstract:
Energy is lost when a rope transfers from a slack state to a taut state. This transfer is called a snap load and can be very violent. It is proposed to use synthetic fiber ropes as a type of passive control device in new or existing structures to mitigate seismic response. Experimental static and snap load (dynamic) tests were conducted on various synthetic fiber ropes. An eleven-foot-tall drop tower was built in the Virginia Tech Structures and Materials Laboratory in order to conduct these tests. Force and acceleration of the drop plate, which slides vertically within the drop tower, were measured with respect to time for all dynamic tests. Acceleration data was integrated using the trapezoidal or midpoint rule to obtain velocity and displacement values. Plots were made for each test in order to give a better representation of the results. These plots include representations of force and acceleration vs. time, force vs. absolute displacement, force vs. velocity, and force, acceleration, velocity, and displacement vs. time (during the initial taut phase only). Test results show that energy was dissipated in all of the dynamic drop tests, which was expected. Also, the displacement of each rope did not return to zero at the same time that the force returned to zero after the initial snap load. This proves that the ropes undergo some permanent elongation under load. The stiffness of each rope increased with continuous testing. As more tests are conducted on each rope, the strands are pulled tighter into the braided configuration, which causes the rope to become stiffer.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
2

Abbas, Abdelaziz Yousif Mohamed. "Efficiency evaluation of permanent magnet synchronous machines using the synthetic loading technique." Thesis, University of Strathclyde, 2009. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=11252.

Full text
Abstract:
This thesis investigates the application of the synthetic loading technique for efficiency evaluation, of permanent magnet (PM) synchronous machines. The standard tests require specialist test facilities, additional machines, and for large machines, linear machines, or vertical mounted machine and floor space. Therefore, an efficiency test method that avoids the need for an external mechanical load is desirable. Synthetic loading can determine machine losses and eliminates the need for a mechanical load connected to the test machine. The synthetic loading technique forces the machine under test to accelerate and decelerate thereby alternating between motor-generator action. If configured correctly the machine, on average over each synthetic loading cycle, operates at rated rms current, rated rms voltage and rated speed, thus producing rated copper loss, iron loss and friction and windage loss. The thesis considers how to properly configure synthetic loading for PM synchronous machines. A derivation of the mathematical models of the synthetic loading technique applied to the permanent magnet synchronous machines is provided in the thesis. The model is based on the direct and quadrature axis equivalent circuits. From the mathematical model, a quadrature axis current algorithm is proposed which is used to develop the speed equation and the stator direct and quadrature axis voltage and current equations. The thesis also establishes a generalised mathematical model of the synthetic loading technique for permanent magnet synchronous machines. Using the derived equations, the effects of synthetic loading frequency on the dc link voltage and the inverter phase-leg volt-ampere rating are analysed. This shows that the synthetic loading technique requires an increased dc link voltage and inverter volt-ampere rating compared to the standard efficiency test technique. A test rig is constructed and used to assess synthetic loading for fractional hp machines. The research verifies the synthetic loading technique experimentally for three permanent magnet synchronous machine types: the surface-mount PM synchronous machine, the interior PM synchronous machine and the linear PM synchronous machine. Simulation and experimental results from synthetic loading are compared with the standard efficiency test. The simulation and the experimental results show that the synthetic loading technique is capable of evaluating the efficiency of the permanent magnet synchronous machines. The key contributions of this work concerns the mathematical model of PM synchronous machines under synthetic loading, the hardware and software implementation and validation of synthetic loading as a technique for efficiency evaluation of PM synchronous machines.
APA, Harvard, Vancouver, ISO, and other styles
3

Comtet, Jean. "Passive phloem loading and long-distance transport in a synthetic tree-on-a-chip." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/101330.

Full text
Abstract:
Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 45-46).
According to the Munch mechanism, vascular plants rely on osmotic pressure gradients to export sugars from regions of synthesis (mature leaves) to sugar sinks (roots, fruits). A crucial step in this process is the loading of sugars from photosynthetic cells to the export conduit (the phloem). In this thesis, we developed a synthetic microfluidic osmotic pump mimicking the mechanism of passive phloem loading, where sugars are transported by diffusion from a sugar reservoir to the phloem. This design allows the development of steady flow over several hours. We show that in our system, phloem concentration is set by a relative balance between loading by diffusion from the source and export by convection through the phloem, via a single nondimensional system-scale Peclet number that we call the flushing number. For large flushing numbers, export is limited by diffusion from the source, and flow rates scale weakly with transport resistance. For low flushing numbers, export is limited by convection through the phloem and phloem concentration is close to that of the source, leading to efficient export of water and sugars. In plants, passive phloem loading is used predominantly by trees. We show that the hydrostatic pressures developed in our synthetic system can reach up to ten bars and are thus compatible with the pressures expected to drive long-distance transport in large trees. Moreover, we show that the regime of efficient export in passive loaders is more accessible to plants with large transport resistances, providing a rational for the use of the passive loading mechanism by most tree species.
by Jean Comtet.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
4

ZHANG, KAI. "REDUCING BIOFOULING IN MEMBRANE BIOREACTORS TREATING SYNTHETIC EARLY PLANETARY BASE WASTEWATER." University of Cincinnati / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1189560153.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chokhandre, Snehal K. "A Biomechanical Comparison Between a Biological Intervertebral Disc and Synthetic Intervertebral Disc Implants Under Complex Loading: An In Vitro Study." University of Akron / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=akron1187022568.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Basso, Andrea. "High loading beads for single bead screening in combinatorial chemistry." Thesis, University of Southampton, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.326797.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

McKinnon, Douglas John Electrical Engineering &amp Telecommunications Faculty of Engineering UNSW. "Novel efficiency evaluation methods and analysis for three-phase induction machines." Awarded by:University of New South Wales. Electrical Engineering and Telecommunications, 2005. http://handle.unsw.edu.au/1959.4/21869.

Full text
Abstract:
This thesis describes new methods of evaluating the efficiency of three-phase induction machines using synthetic loading. Synthetic loading causes the induction machine to draw full-load current without the need to connect a mechanical load to the machine's drive shaft. The synthetic loading methods cause the machine to periodically accelerate and decelerate, producing an alternating motor-generator action. This action causes the machine, on average over each synthetic loading cycle, to operate at rated rms current, rated rms voltage and full-load speed, thereby producing rated copper losses, iron loss and friction and windage loss. The excitation voltages are supplied from a PWM inverter with a large capacity DC bus capable of supplying rated rms voltage. The synthetic loading methods of efficiency evaluation are verified in terms of the individual losses in the machine by using a new dynamic model that accounts for iron loss and all parameter variations. The losses are compared with the steady-state loss distribution determined using very accurate induction machine parameters. The parameters were identified using a run-up-to-speed test at rated voltage and the locked rotor and synchronous speed tests conducted with a variable voltage supply. The latter tests were used to synthesise the variations in stator leakage reactance, magnetising reactance and the equivalent iron loss resistance over the induction machine's speed range. The run-up-to-speed test was used to determine the rotor resistance and leakage reactance variations over the same speed range. The test method results showed for the first time that the rotor leakage reactance varied in the same manner as the stator leakage and magnetising reactances with respect to current. When all parameter variations are taken into account there is good agreement between theoretical and measured results for the synthetic loading methods. The synthetic loading methods are applied to three-phase induction machines with both single- and double-cage rotors to assess the effect of rotor parameter variations in the method. Various excitation waveforms for each method were used and the measured and modelled efficiencies compared to conventional efficiency test results. The results verify that it is possible to accurately evaluate the efficiency of three-phase induction machines using synthetic loading.
APA, Harvard, Vancouver, ISO, and other styles
8

Lebreton, Sylvian Michel. "Immobilised dendrimers as high-loading solid-phase supports for synthesis and screening." Thesis, University of Southampton, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.250000.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Voitsekhovskaja, Olga Vladimirovna. "On the role of sugar compartmentation and stachyose synthesis in symplastic phloem loading." [S.l. : s.n.], 2001. http://deposit.ddb.de/cgi-bin/dokserv?idn=964192977.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kasongo, Wa Kasongo Jean B. "Synthesis and characterization of micro- and mesoporous materials for low temperature selective catalytic reduction of nitrogen oxides." Thesis, University of the Western Cape, 2011. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_2469_1320325768.

Full text
Abstract:
In summary, it has been shown during this study that bimetallic Fe and Mn containing catalysts can be prepared by wet impregnation and not by ion exchange because of the competition between two different metals at different oxidation number. Only a single metallic phase catalyst could be prepared successfully by using ion exchange.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Synthetic loading"

1

Gordon, Graeme. Synthetic oligosaccharides and studies of carbohydrates in phloem loading. Birmingham: University of Birmingham, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Keane, Robert E. The photoload sampling technique: Estimating surface fuel loadings from downward-looking photographs of synthetic fuelbeds. [Fort Collins, CO]: U.S. Dept. of Agriculture, Forest Service, Rocky Mountain Research Station, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Interim target loadings for acidic deposition in Western Canada: A synthesis of existing information : final report to the Western Target Loading Planning Group and the National Research Council Associate Committee on Scientific Criteria for Environmental Quality. [Victoria, B.C.]: Western and Northern Canada LRTAP Technical Committee, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Synthetic loading"

1

Tebaldi, Marli Luiza, Rose Marie Belardi, and Fernanda S. Poletto. "Smart Polymers: Synthetic Strategies, Supramolecular Morphologies, and Drug Loading." In Industrial Applications for Intelligent Polymers and Coatings, 147–64. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-26893-4_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Trabucchi, Ivan, Antonio Mudadu, Giuseppe Tiberti, Antonio Conforti, Giovanni Plizzari, and Ralf Winterberg. "Structural Behavior of Precast Tunnel Segments Reinforced by Macro-synthetic Fibers During Temporary Loading Phases." In RILEM Bookseries, 714–26. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-83719-8_61.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Abbas, Rafaa M., and Ameer J. Abdulkareem. "Geometric Nonlinear Synthetic Earthquake Analysis of Base Isolated Tall Steel Buildings Under Site-Specific Seismic Loading." In Lecture Notes in Civil Engineering, 349–64. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9399-4_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Graham, R. A., B. Morosin, Y. Horie, E. L. Venturini, M. Boslough, M. J. Carr, and D. L. Williamson. "Chemical Synthesis under High Pressure Shock Loading." In Shock Waves in Condensed Matter, 693–711. Boston, MA: Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-2207-8_102.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Haag, Rainer, and Sebastian Roller. "Dendritic Polymers as High-Loading Supports for Organic Synthesis and Catalysis." In Polymeric Materials in Organic Synthesis and Catalysis, 305–44. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527601856.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bragov, Anatolii M., Leonid A. Igumnov, Aleksandr Yu Konstantinov, and Andrey K. Lomunov. "Deformation and Fracture of Titanium Alloys Under Dynamic Loading." In Modeling, Synthesis and Fracture of Advanced Materials for Industrial and Medical Applications, 11–33. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-48161-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mayandi, Kalimuthu, Subramanian Karthikeyan, Nagarajan Rajini, and Azeez B. Alavudeen. "Morphological Examination of Worn out Surfaces of Basalt Fiber-PEI Composites with Varying Loading Conditions." In Synthesis and Tribological Applications of Hybrid Materials, 215–26. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2018. http://dx.doi.org/10.1002/9783527808588.ch11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nguyen, Tien Ngoc-Thuy, Dat Tan Nguyen, Vo Van Toi, and Thi-Hiep Nguyen. "Synthesis of N,O-Carboxymethyl Chitosan-Aldehyde Hyaluronic Acid Hydrogel Loading Silver Nanoparticles." In IFMBE Proceedings, 179–82. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-5859-3_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chang, K. C., P. S. Wu, J. M. Yeh, and M. F. Hsieh. "Synthesis and Characterization of Novel Self-assembly and Ph-Sensitive Anticancer Drug Carriers: (PAMAM-AP)-Modified PEG Loading with DOX." In IFMBE Proceedings, 699–702. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-02913-9_178.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Loading patterns on natural grass and synthetic turf in American football." In Routledge Handbook of Ergonomics in Sport and Exercise, 317–22. Routledge, 2013. http://dx.doi.org/10.4324/9780203123355-35.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Synthetic loading"

1

Abduallah, A. A., O. Dordevic, M. Jones, and E. Levi. "Synthetic Loading for Symmetrical and Asymmetrical Nine-Phase Machines." In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2018. http://dx.doi.org/10.1109/iecon.2018.8592900.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Abduallah, A. A., O. Dordevic, and M. Jones. "Synthetic Loading for Symmetrical and Asymmetrical Six-Phase Machines." In 2018 IEEE 18th International Power Electronics and Motion Control Conference (PEMC). IEEE, 2018. http://dx.doi.org/10.1109/epepemc.2018.8521750.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dessouky, Sobhy S., M. Fawzi, Basem E. Elnaghi, Hamed A. Ibrahim, and Mariam K. Shehata. "Synthetic loading of three phase induction machines using PWM inverter." In 2017 Nineteenth International Middle East Power Systems Conference (MEPCON). IEEE, 2017. http://dx.doi.org/10.1109/mepcon.2017.8301310.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

SERAFINI, R., S. R. A. DANTAS, R. R. AGRA, and A. D. FIGUEIREDO. "Influence of fire exposure on the flexural behavior of macro-synthetic fiber reinforced concrete." In 9th International Conference On Concrete Under Severe Conditions - Environment and Loading. MENVIA, 2019. http://dx.doi.org/10.31808/5ca6e03b5ca4f0d406ac8889.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Szabados, Barna, and Many Peung. "Stabilizing of a Synthetic Loading Test Rig for Large Induction Machines." In 2006 IEEE Instrumentation and Measurement Technology. IEEE, 2006. http://dx.doi.org/10.1109/imtc.2006.328578.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Barna Szabados. "Stabilizing of a Synthetic Loading Test Rig for Large Induction Machines." In 2006 IEEE Instrumentation and Measurement Technology. IEEE, 2006. http://dx.doi.org/10.1109/imtc.2006.235050.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Al Rikabi, Fouad T., Shad M. Sargand, Issam Khoury, John Kurdziel, Husam H. Hussein, and Safiya Ahmed. "Thin-Wall Synthetic Fiber Reinforced Concrete Pipe Performance under Cyclic Loading." In Pipelines 2019. Reston, VA: American Society of Civil Engineers, 2019. http://dx.doi.org/10.1061/9780784482506.057.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Abbas, Abdelaziz Y. M., and John E. Fletcher. "Efficiency evaluation of linear permanent magnet synchronous machines using the synthetic loading method." In 2008 IEEE Power Electronics Specialists Conference - PESC 2008. IEEE, 2008. http://dx.doi.org/10.1109/pesc.2008.4592422.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Abbas, Abdelaziz Y. M., and John E. Fletcher. "Efficiency evaluation of interior permanent magnet synchronous machines using the synthetic loading technique." In 2010 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2010). IEEE, 2010. http://dx.doi.org/10.1109/speedam.2010.5544908.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

McKinnon, D. J. "On-site efficiency evaluation of three-phase induction motors using synthetic loading methods." In Second IEE International Conference on Power Electronics, Machines and Drives. IEE, 2004. http://dx.doi.org/10.1049/cp:20040301.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Synthetic loading"

1

Muzzell, Patsy A., Leo L. Stavinoha, Eric Sattler, Angela Terry, and Luis Villahermosa. Elastomer Impact When Switch-Loading Synthetic Fuel Blends and Petroleum Fuels. Fort Belvoir, VA: Defense Technical Information Center, July 2006. http://dx.doi.org/10.21236/ada459513.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Melby, Jeffrey, Thomas Massey, Abigail Stehno, Norberto Nadal-Caraballo, Shubhra Misra, and Victor Gonzalez. Sabine Pass to Galveston Bay, TX Pre-construction, Engineering and Design (PED) : coastal storm surge and wave hazard assessment : report 1 – background and approach. Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/41820.

Full text
Abstract:
The US Army Corps of Engineers, Galveston District, is executing the Sabine Pass to Galveston Bay Coastal Storm Risk Management (CSRM) project for Brazoria, Jefferson, and Orange Counties regions. The project is currently in the Pre-construction, Engineering, and Design phase. This report documents coastal storm water level and wave hazards for the Port Arthur CSRM structures. Coastal storm water level (SWL) and wave loading and overtopping are quantified using high-fidelity hydrodynamic modeling and stochastic simulations. The CSTORM coupled water level and wave modeling system simulated 195 synthetic tropical storms on three relative sea level change scenarios for with- and without-project meshes. Annual exceedance probability (AEP) mean values were reported for the range of 0.2 to 0.001 for peak SWL and wave height (Hm0) along with associated confidence limits. Wave period and mean wave direction associated with Hm0 were also computed. A response-based stochastic simulation approach is applied to compute AEP runup and overtopping for levees and overtopping, nappe geometry, and combined hydrostatic and hydrodynamic fluid pressures for floodwalls. CSRM structure crest design elevations are defined based on overtopping rates corresponding to incipient damage. Survivability and resilience are evaluated. A system-wide hazard level assessment was conducted to establish final recommended system-wide CSRM structure elevations.
APA, Harvard, Vancouver, ISO, and other styles
3

Stehno, Abigail, Jeffrey Melby, Shubhra Misra, Norberto Nadal-Caraballo, and Victor Gonzalez. Sabine Pass to Galveston Bay, TX Pre-construction, Engineering and Design (PED) : coastal storm surge and wave hazard assessment : report 2 – Port Arthur. Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/41901.

Full text
Abstract:
The US Army Corps of Engineers, Galveston District, is executing the Sabine Pass to Galveston Bay Coastal Storm Risk Management (CSRM) project for Brazoria, Jefferson, and Orange Counties regions. The project is currently in the Pre-construction, Engineering, and Design phase. This report documents coastal storm water level and wave hazards for the Port Arthur CSRM structures. Coastal storm water level (SWL) and wave loading and overtopping are quantified using high-fidelity hydrodynamic modeling and stochastic simulations. The CSTORM coupled water level and wave modeling system simulated 195 synthetic tropical storms on three relative sea level change scenarios for with- and without-project meshes. Annual exceedance probability (AEP) mean values were reported for the range of 0.2 to 0.001 for peak SWL and wave height (Hm0) along with associated confidence limits. Wave period and mean wave direction associated with Hm0 were also computed. A response-based stochastic simulation approach is applied to compute AEP values for overtopping for levees and overtopping, nappe geometry, and combined hydrostatic and hydrodynamic fluid pressures for floodwalls. CSRM crest design elevations are defined based on overtopping rates corresponding to incipient damage. Survivability and resilience are evaluated. A system-wide hazard level assessment was conducted to establish final recommended system-wide elevations.
APA, Harvard, Vancouver, ISO, and other styles
4

Stehno, Abigail, Jeffrey Melby, Shubhra Misra, Norberto Nadal-Caraballo, and Victor Gonzalez. Sabine Pass to Galveston Bay, TX Pre-construction, Engineering and Design (PED) : coastal storm surge and wave hazard assessment : report 4 – Freeport. Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/41903.

Full text
Abstract:
The US Army Corps of Engineers, Galveston District, is executing the Sabine Pass to Galveston Bay Coastal Storm Risk Management (CSRM) project for Brazoria, Jefferson, and Orange Counties regions. The project is currently in the Pre-construction, Engineering, and Design phase. This report documents coastal storm water level (SWL) and wave hazards for the Freeport CSRM structures. Coastal SWL and wave loading and overtopping are quantified using high-fidelity hydrodynamic modeling and stochastic simulations. The CSTORM coupled water level and wave modeling system simulated 195 synthetic tropical storms on three relative sea level change scenarios for with- and without-project meshes. Annual exceedance probability (AEP) mean values were reported for the range of 0.2 to 0.001 for peak SWL and wave height (Hm0) along with associated confidence limits. Wave period and mean wave direction associated with Hm0 were also computed. A response-based stochastic simulation approach is applied to compute AEP values for overtopping for levees and overtopping, nappe geometry and combined hydrostatic and hydrodynamic fluid pressures for floodwalls. CSRM crest design elevations are defined based on overtopping rates corresponding to incipient damage. Survivability and resilience are evaluated. A system-wide hazard level assessment was conducted to establish final recommended system-wide elevations.
APA, Harvard, Vancouver, ISO, and other styles
5

Stehno, Abigail, Jeffrey Melby, Shubhra Misra, Norberto Nadal-Caraballo, and Victor Gonzalez. Sabine Pass to Galveston Bay, TX Pre-construction, Engineering and Design (PED) : coastal storm surge and wave hazard assessment : report 3 – Orange County. Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/41902.

Full text
Abstract:
The US Army Corps of Engineers, Galveston District, is executing the Sabine Pass to Galveston Bay Coastal Storm Risk Management (CSRM) project for Brazoria, Jefferson, and Orange Counties regions. The project is currently in the Pre-construction, Engineering, and Design phase. This report documents coastal storm water level (SWL) and wave hazards for the Orange County CSRM structures. Coastal SWL and wave loading and overtopping are quantified using high-fidelity hydrodynamic modeling and stochastic simulations. The CSTORM coupled water level and wave modeling system simulated 195 synthetic tropical storms on three relative sea level change scenarios for with- and without-project meshes. Annual exceedance probability (AEP) mean values were reported for the range of 0.2 to 0.001 for peak SWL and wave height (Hm0) along with associated confidence limits. Wave period and mean wave direction associated with Hm0 were also computed. A response-based stochastic simulation approach is applied to compute AEP values for overtopping for levees and overtopping, nappe geometry, and combined hydrostatic and hydrodynamic fluid pressures for floodwalls. CSRM crest design elevations are defined based on overtopping rates corresponding to incipient damage. Survivability and resilience are evaluated. A system-wide hazard level assessment was conducted to establish final recommended system-wide elevations.
APA, Harvard, Vancouver, ISO, and other styles
6

Keane, Robert E., and Laura J. Dickinson. The photoload sampling technique: estimating surface fuel loadings from downward-looking photographs of synthetic fuelbeds. Ft. Collins, CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station, 2007. http://dx.doi.org/10.2737/rmrs-gtr-190.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Synthetic loading' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography