Relevant bibliographies by topics / Switching at zero voltage

Academic literature on the topic 'Switching at zero voltage'

Author: Grafiati
Published: 30 May 2022
Last updated: 31 May 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Switching at zero voltage.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Switching at zero voltage"

1

Lin, Bor-Ren, and Jyun-Ji Chen. "Zero-voltage-switching/zero-current-switching soft-switching dual-resonant converter." International Journal of Electronics 97, no. 5 (May 2010): 569–85. http://dx.doi.org/10.1080/00207210903486849.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Huang, Chien-Chun, Tsung-Lin Tsai, Yao-Ching Hsieh, and Huang-Jen Chiu. "A Bilateral Zero-Voltage Switching Bidirectional DC-DC Converter with Low Switching Noise." Energies 11, no. 10 (October 1, 2018): 2618. http://dx.doi.org/10.3390/en11102618.

Full text
Abstract:
This paper proposes a novel bilateral zero-voltage switching (ZVS) bidirectional converter with synchronous rectification. By controlling the direction and timing of excessive current injection, the main power switches can achieve bilateral ZVS under various loads and output voltages. Compared with the common soft-switching power converter with only zero-voltage turn-on, the proposed bilateral ZVS bidirectional converter can achieve both zero-voltage switching on and off in every switching cycle. This feature can alleviate the output switching noise due to the controlled rising and falling slope of the switch voltage. Furthermore, the voltage slopes almost remain unchanged over a wide range of output voltages and load levels. The most important feature of bilateral ZVS is to reduce the output switching noise. Experimental results based on a 1 kW prototype are presented to demonstrate the performance of the proposed converter. From experimental results on the proposed scheme, the switching noise reduction is about 75%.
APA, Harvard, Vancouver, ISO, and other styles
3

rao, G. Nageswara, K. Chandra sekar, and P. Sangameswararaju. "Zero-Voltage and Zero-Current Switching Converters." International Journal of Computer Applications 8, no. 10 (October 10, 2010): 1–5. http://dx.doi.org/10.5120/1246-1612.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kazimierczuk, M. K., and J. Jozwik. "Class-E zero-voltage-switching and zero-current-switching rectifiers." IEEE Transactions on Circuits and Systems 37, no. 3 (March 1990): 436–44. http://dx.doi.org/10.1109/31.52739.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jejurkar, Mr Pratik. "Switching at Zero Voltage Level." International Journal for Research in Applied Science and Engineering Technology 7, no. 3 (March 31, 2019): 1739–43. http://dx.doi.org/10.22214/ijraset.2019.3322.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Do, Hyun Lark. "Non-Isolated High Step-up DC-DC Converter with a Coupled Inductor." Advanced Materials Research 424-425 (January 2012): 1024–27. http://dx.doi.org/10.4028/www.scientific.net/amr.424-425.1024.

Full text
Abstract:
A non-isolated high step-up DC-DC converter with a coupled inductor is proposed in this paper. The proposed converter provides high voltage gain and soft-switching operation of all semiconductor devices. A voltage doubler and a coupled inductor increase the voltage gain. Zero-voltage-switching (ZVS) of all switches and zero-current-switching (ZCS) of all diodes are achieved. Also, the voltages across the semiconductor devices are effectively clamped. Due to the soft-switching operation of all switching devices, the switching loss is significantly reduced and the high efficiency is obtained. The feasibility and performance of the proposed converter were verified on an experimental prototype
APA, Harvard, Vancouver, ISO, and other styles
7

Lin, B. R., J. J. Chen, and S. F. Shen. "Zero voltage switching double-ended converter." IET Power Electronics 3, no. 2 (2010): 187. http://dx.doi.org/10.1049/iet-pel.2008.0239.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wang, C. M. "Zero-voltage-switching DC∕AC inverter." IET Electric Power Applications 1, no. 3 (2007): 387. http://dx.doi.org/10.1049/iet-epa:20060166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Urgun, S. "Zero-voltage transition–zero-current transition pulsewidth modulation DC–DC buck converter with zero-voltage switching–zero-current switching auxiliary circuit." IET Power Electronics 5, no. 5 (2012): 627. http://dx.doi.org/10.1049/iet-pel.2011.0304.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gurunathan, R., and A. K. S. Bhat. "A zero-voltage transition boost converter using a zero-voltage switching auxiliary circuit." IEEE Transactions on Power Electronics 17, no. 5 (September 2002): 658–68. http://dx.doi.org/10.1109/tpel.2002.802184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Switching at zero voltage"

1

Jeong, Timothy. "Zero Voltage Switching Hybrid Voltage Divider Converter." DigitalCommons@CalPoly, 2021. https://digitalcommons.calpoly.edu/theses/2290.

Full text
Abstract:
This project proposes a new hybrid voltage divider DC-DC converter that utilizes switching capacitors and inductors to produce zero voltage switching (ZVS) at the turn on state of its switches. By achieving ZVS, the switching losses are significantly reduced; thus, increasing the overall efficiency of the converter at various loads. The goal for this thesis is to perform analysis of the operation of the converter, derive equations for sizing the main components, and demonstrate its functionality through computer simulation and hardware prototype. Results of the simulation and hardware testing show that the proposed converter produces the desired output voltage while providing the zero voltage switching benefits. The converter’s efficiency reaches above 92% starting from 1A load and continues to increase to 97.6% at 4A load. Overall, results from this thesis verifies the potential of the proposed converter as an alternative solution to achieve a very efficient DC-DC solution when half of the input voltage is required at the output without the use of complex feedback control circuitry.
APA, Harvard, Vancouver, ISO, and other styles
2

Xi, Youhao. "Zero voltage switching flyback and forward converter topologies." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ40214.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Luc, Brian R. "Digitally Controlled Zero-Voltage-Switching Quasi-Resonant Buck Converter." DigitalCommons@CalPoly, 2015. https://digitalcommons.calpoly.edu/theses/1346.

Full text
Abstract:
ABSTRACT Digitally-Controlled Two-Phase Zero-Voltage-Switching Quasi-Resonant Buck Converter Brian Luc This thesis entails the design, construction, and performance analysis of a digitally-controlled two-phase Zero-Voltage Switching Quasi-Resonant (ZVS-QR) buck converter. The converter is aimed to address the issues associated with powering CPUs operating at lower voltage and high current. To evaluate its performance, the Two-Phase ZVS-QR buck converter is compared against a traditional Two-Phase buck converter. The design procedure required to implement both converters through utilizing the characterization curve and formulas derived from their circuit configurations will be presented. Computer simulation of the Two-Phase ZVS-QR buck converter is provided to exhibit its operation and potential for use in low voltage and high current applications. In addition, hardware prototypes for both ZVS-QR and traditional buck converters are constructed utilizing a Programmable Interface Controller (PIC). Results from hardware tests demonstrate the success of using digital controller for the 60W 12VDC to 1.5VDC ZVS-QR buck converter. Merits and drawbacks based on the operation and performance of both converters will also be assessed and described. Further work to improve the performance of ZVS-QR will also be presented. Keywords: Buck Converter; Zero-Voltage-Switching; Multi-Phase; Efficiency; Switching Loss
APA, Harvard, Vancouver, ISO, and other styles
4

Choi, Jae-Young. "Analysis of Inductor-Coupled Zero-Voltage-Transition Converters." Diss., Virginia Tech, 2001. http://hdl.handle.net/10919/28537.

Full text
Abstract:
As is the case for DC-DC converters, multi-phase converters require both high-quality power control and high power-density. Although a higher switching frequency not only improves the quality of the converter output but also decreases the size of the converter, it increases switching losses and electromagnetic interference (EMI) noise. Since the soft-switching topologies reduce the switching losses of the converter main switches, the topologies make converters partially independent from the switching frequency. However, the conventional soft-switching topologies have already proposed most of the possible ways to improve converter performance. In addition, the trends of the newly generated power devices reduce the advantages of soft-switching topologies. This critical situation surrounding soft-switching topologies gives research motivations: What features of soft-switching topologies facilitate their practical applications? Given this motivation, the dissertation discusses two aspects = simplifying auxiliary circuits and accounting for the effects of soft-switching operations on the converter control. Engineers working with medium- and high-power multi-phase converters require simplified soft-switching topologies that have the same level of performance as the conventional soft-switching topologies. This demand is the impetus behind one of the research objectives = simplifying the auxiliary circuits of Zero-Voltage-Transition (ZVT) inverters. Simplifying the auxiliary circuits results in both a smaller number of and lower cost for auxiliary components, without any negative impact on performance. This dissertation proposes two major concepts for the simplification - the Single-Switch Single-Leg (S3L) ZVT cell and the Phase-Lock (PL) concept. Throughout an effort to eliminate circulating currents of inductor-coupled (IC) ZVT converters, the S3L ZVT cell is developed. The proposed cell allows a single auxiliary switch to achieve zero-voltage conditions for both the top and bottom main switches, and it achieves the same level of performance as the conventional ZVT cell, as well. This proposal makes IC ZVT topologies more attractive to multi-phase converter applications. Because all of the top main switches generally have identical sequences for zero-voltage turn-on commutations, one auxiliary switch might handle the commutations of all of the top main switches. This possibility introduces the PL concept, which allows the two auxiliary switches to provide a zero-voltage condition for any main switch commutation. In order to compensate for restrictions of this concept, a modified space-vector modulation (SVM) scheme also is introduced. A soft-switching topology changes the duty ratios of the converter, which affects the controllability of the converter. Therefore, this dissertation selects resolution of this issue as one of the research objectives. This dissertation derives the generalized timing equations of ZVT operations, and the generalized equations formulize the effect of ZVT operation on both duty ratios and DC current. Moreover, the effect of SVM schemes is also investigated. An average model of the ZVT converter is developed using both the timing analysis and the investigation of SVM schemes, and small-signal analysis using the average model predicts the steady-state characteristics of the converter.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
5

Hua, Guichao. "Novel zero-voltage switching techniques for pulse-width-modulated converters." Thesis, This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-03242009-040340/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Musabeyoglu, Ahmet Can. "A zero-voltage switching technique for high frequency buck converter ICs." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/113122.

Full text
Abstract:
Thesis: M. Eng., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2017.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 59-60).
This thesis explores a zero-voltage switching (ZVS) method that can be used to decrease the frequency dependent losses in a buck converter. The specific application for this thesis was a buck converter IC with an input voltage of up to 42V. The method utilizes the addition of an auxiliary circuit composed of a helper inductor and two helper power MOSFETs that compliment the switching transition of a conventional synchronous buck converter topology. It is shown in this thesis that by using the described topology, the switching losses of the high-side power MOSFET in a synchronous buck converter can be reduced by up to 45%. Furthermore, it is shown that a similar helper circuit could be used to reduce the gate drive losses for both power MOSFETs in a synchronous buck converter by up to 60%. Since the method requires the use of an additional helper inductor with a small value (10-50 nH), various methods to integrate this inductor into an IC package are investigated. 0.35[mu]m BiCMOS technology was used to simulate and analyze the merits of the described topology and compare it to the LT8697, a hard-switched synchronous buck converter IC.
by Ahmet Can Musabeyoglu.
M. Eng.
APA, Harvard, Vancouver, ISO, and other styles
7

Jain, Nikhil. "A zero voltage switching boost converter using a soft switching auxiliary circuit with reduced conduction losses." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ59306.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mao, Hengchun. "Soft-switching techniques for high-power PWM converters." Diss., This resource online, 1996. http://scholar.lib.vt.edu/theses/available/etd-10052007-143055/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cliffe, Robert J. "High power high frequency DC-DC converter topologies for use in off-line power supplies." Thesis, Loughborough University, 1996. https://dspace.lboro.ac.uk/2134/7305.

Full text
Abstract:
The development of a DC-DC converter for use in a proposed range of one to ten kilowatt off-line power supplies is presented. The converter makes good use of established design practices and recent technical advances. The thesis begins with a review of traditional design practices, which are used in the design of a 3kW, 48V output DC-DC converter, as a bench-mark for evaluation of recent technical advances. Advances evaluated include new converter circuits, control techniques, components, and magnetic component designs. Converter circuits using zero voltage switching (ZVS) transitions offer significant advantages for this application. Of the published converters which have ZVS transitions the phase shift controlled full bridge converter is the most suitable, and assessments of variations on this circuit are presented. During the course of the research it was realised that the ZVS range of one leg of the phase shift controlled full bridge converter could be extended by altering the switching pattern, and this new switching pattern is proposed. A detailed analysis of phase shift controlled full bridge converter operation uncovers a number of operational findings which give a better and more complete understanding of converter operation than hitherto published. Converter design equations and guidelines are presented and the effects of the new improvement are investigated by an approximate analysis. Computer simulations using PSPICE2 are carried out to predict converter performance. A prototype converter design, construction details and test results are given. The results obtained compare well to the predicted performance and confirm the advantages of the new switching pattern.
APA, Harvard, Vancouver, ISO, and other styles
10

Kang, Wen. "A line and load independent zero voltage switching dc/dc full bridge converter topology." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ59307.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Switching at zero voltage"

1

SGS-Thomson. Linear & switching voltage regulators application manual. [s.l.]: SGS-Thomson, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rowley, Anna Kaspartian. A New Zero-Voltage-Mode Resonant Converter. Uxbridge: Brunel University, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Semiconductors, Philips. High-voltage and switching NPN power transistors: Data handbook. Eindhoven: Philips Semiconductors, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Semiconductors, Philips. High-voltage and switching NPN power transistors: Data handbook. Eindhoven: Philips Semiconductors, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Semiconductors, Philips. High-voltage and switching NPN power transistors: Data handbook. Eindhoven: Philips Semiconductors, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Semiconductors, Philips. High-voltage and switching NPN power transistors: Data handbook. Eindhoven: Philips Semiconductors, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Zhiyuan, Jianhua Wang, Yingsan Geng, and Zhenxing Wang. Switching Arc Phenomena in Transmission Voltage Level Vacuum Circuit Breakers. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-1398-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Design and Implementation of a Zero-Voltage-Switching, Pulse-Width- Modulated, High-Frequency, Resonant Buck Chopper. Storming Media, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Howson, Peter Allen. Bulk photoconductive high voltage switching techniques. 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

1922-, Nakanishi Kunio, ed. Switching phenomena in high-voltage circuit breakers. New York: M. Dekker, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Switching at zero voltage"

1

Do, Hyun-Lark. "Zero-Voltage-Switching Voltage Doubled SEPIC Converter." In Advances in Intelligent and Soft Computing, 51–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-25989-0_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Karthikeyan, C., and K. Duraiswamy. "A New Three-Level Zero Voltage Switching Converter." In Recent Advancements in System Modelling Applications, 193–203. India: Springer India, 2013. http://dx.doi.org/10.1007/978-81-322-1035-1_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pradhan, Sagar, Dibyadeep Bhattacharya, and Moumi Pandit. "Design of PWM Triggered SEPIC Converter Using Zero-Voltage Zero-Current Switching." In Cognitive Informatics and Soft Computing, 531–38. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1451-7_55.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chern, Gwo-Tarng, and Jenn-Jong Shieh. "Zero-Voltage-Switching Bi-Frequency Push-Pull Driver for Liquid Crystal Displays." In Chaos and Complex Systems, 259–64. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33914-1_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Khatun, Koyelia, and Akshay Kumar Rathore. "Analysis and Design of Extended Range Zero Voltage Switching (ZVS) Active-Clamping Current-Fed Push–Pull Converter." In Lecture Notes in Electrical Engineering, 45–54. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-2256-7_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Guo, Zhiqiang, and Deshang Sha. "Output-Series-Connected Dual Active Bridge Converters for Zero-Voltage Switching Throughout Full Load Range by Employing Auxiliary LC Networks." In New Topologies and Modulation Schemes for Soft-Switching Isolated DC–DC Converters, 115–45. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9934-4_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sha, Deshang, and Guo Xu. "Three-Level Bidirectional DC–DC Converter with an Auxiliary Inductor in Adaptive Working Mode for Full-Operation Zero-Voltage Switching." In High-Frequency Isolated Bidirectional Dual Active Bridge DC–DC Converters with Wide Voltage Gain, 115–48. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0259-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Okayama, H., T. Ushikubo, and T. Ishida. "Low Drive Voltage Directional Coupler Optical Switch with Reduced Voltage-Length Product." In Photonic Switching II, 80–83. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-76023-5_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ito, Hiroki, and Denis Dufournet. "Interrupting Phenomena of High-Voltage Circuit Breaker." In Switching Equipment, 63–81. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72538-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wicht, Bernhard, Jürgen Wittmann, Achim Seidel, and Alexis Schindler. "High-Voltage Fast-Switching Gate Drivers." In Wideband Continuous-time ΣΔ ADCs, Automotive Electronics, and Power Management, 155–76. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41670-0_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Switching at zero voltage"

1

"Zero voltage switching converters." In 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551). IEEE, 2004. http://dx.doi.org/10.1109/pesc.2004.1355795.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Koushki, Behnam, Alireza Safaee, Praveen Jain, and Alireza Bakhshai. "Zero voltage switching differential inverters." In 2015 IEEE Applied Power Electronics Conference and Exposition (APEC). IEEE, 2015. http://dx.doi.org/10.1109/apec.2015.7104606.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dudrik, Jaroslav, and Vladimir Ruscin. "Voltage fed zero-voltage zero-current switching PWM DC-DC converter." In 2008 13th International Power Electronics and Motion Control Conference (EPE/PEMC 2008). IEEE, 2008. http://dx.doi.org/10.1109/epepemc.2008.4635281.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Shen, Miaosen. "A zero voltage switching switched capacitor voltage doubler." In 2012 IEEE 21st International Symposium on Industrial Electronics (ISIE). IEEE, 2012. http://dx.doi.org/10.1109/isie.2012.6237072.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hwu, K. I., and Y. T. Yau. "KY converter with zero voltage switching." In 2010 5th IEEE Conference on Industrial Electronics and Applications (ICIEA). IEEE, 2010. http://dx.doi.org/10.1109/iciea.2010.5515834.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hiraki, E., T. Tanaka, and M. Nakaoka. "Zero-voltage and zero-current soft-switching PWM inverter." In 2005 IEEE 11th European Conference on Power Electronics and Applications. IEEE, 2005. http://dx.doi.org/10.1109/epe.2005.219661.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Weinberg, S. H. "A New High-Efficiency Zero-Voltage, Zero-Current Switching Topology." In 2006 IEEE International Vacuum Electronics Conference held jointly with 2006 IEEE International Vacuum Electron Sources. IEEE, 2006. http://dx.doi.org/10.1109/ivelec.2006.1666426.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rogers, D. J., and T. C. Green. "Zero-current zero-voltage switching for on-load tap changers." In 5th IET International Conference on Power Electronics, Machines and Drives (PEMD 2010). Institution of Engineering and Technology, 2010. http://dx.doi.org/10.1049/cp.2010.0039.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lin, B. R., Y. S. Huang, J. J. Chen, and J. J. Shieh. "Zero voltage switching double ended Cuk converter." In 2009 4th IEEE Conference on Industrial Electronics and Applications (ICIEA). IEEE, 2009. http://dx.doi.org/10.1109/iciea.2009.5138560.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Adib, E., and H. Farzanehfard. "New zero voltage switching PWM flyback converter." In 2010 1st Power Electronic & Drive Systems & Technologies Conference (PEDSTC). IEEE, 2010. http://dx.doi.org/10.1109/pedstc.2010.5471832.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Switching at zero voltage"

1

Spahn, Olga Blum, Steven Brewer, Roy H. Olsson, Gregory R. Bogart, David L. Luck, Michael R. Watts, Michael J. Shaw, et al. High-speed, sub-pull-in voltage MEMS switching. Office of Scientific and Technical Information (OSTI), January 2008. http://dx.doi.org/10.2172/928822.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Luther, R. D-Zero Signal Board Feed-Thru, Instrumentation and Hi-Voltage Boxes. Office of Scientific and Technical Information (OSTI), February 1990. http://dx.doi.org/10.2172/1031852.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bart, Cockx, Declercq Koen, Dejemeppe Muriel, Inga Leda, and Van der Linden Bruno. Switching from an inclining to a zero-level unemployment benefit profile: Good for work incentives? Research Centre for Education and the Labour Market, 2020. http://dx.doi.org/10.26481/umaror.2020002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bart, Cockx, Declercq Koen, Dejemeppe Muriel, Inga Leda, and Van der Linden Bruno. Switching from an inclining to a zero-level unemployment benefit profile: Good for work incentives? Maastricht University, Graduate School of Business and Economics, 2020. http://dx.doi.org/10.26481/umagsb.2020008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Swaminathan, Vishnu, and Krishnendu Chakrabarty. Investigating the Effect of Voltage-Switching on Low-Energy Task Scheduling in Hard Real-Time Systems. Fort Belvoir, VA: Defense Technical Information Center, January 2005. http://dx.doi.org/10.21236/ada440180.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Switching at zero voltage' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography