Relevant bibliographies by topics / Switched mode power supply

Academic literature on the topic 'Switched mode power supply'

Author: Grafiati
Published: 4 June 2021
Last updated: 20 February 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Switched mode power supply.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Switched mode power supply"

1

Che Husin, Mohd Fikri, Faizah Abu Bakar, A. F. Hasan, Rizalafande Che Ismail, Tg Muhd Aiman Tg Mohd Yusof, Mohd Norhafiz Hashim, and Muhd Firdaus Mohd Radzi. "Energy Saving Switched-Mode Regulator in Motorcycle Power Supply." Applied Mechanics and Materials 815 (November 2015): 359–63. http://dx.doi.org/10.4028/www.scientific.net/amm.815.359.

Full text
Abstract:
A new approach to designing Switched-Mode Power Supply (SMPS) for motorcycle power supply is presented. It uses an alternative way to efficiently regulate power output from a stator generator instead of using conventional Power Rectifier Regulator (PRR). Energy saving switch mode regulator shown the fuel consumption were less used compared using conventional PRR from several experiments using an alpha prototype of SMPS.
APA, Harvard, Vancouver, ISO, and other styles
2

Takeshita, Takaharu, Akira Usui, and Nobuyuki Matsui. "Software controlled switched-mode power supply using DSP." Electronics and Communications in Japan (Part I: Communications) 84, no. 4 (2000): 22–31. http://dx.doi.org/10.1002/1520-6424(200104)84:4<22::aid-ecja3>3.0.co;2-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Singh, Shikha, Bhim Singh, Gurumoorthy Bhuvaneswari, and Vashist Bist. "Power corrected bridgeless converter based switched mode power supply factor." IET Power Electronics 9, no. 8 (June 2016): 1684–93. http://dx.doi.org/10.1049/iet-pel.2014.0933.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pavlova, Z. S., A. V. Fedorov, V. V. Davydov, and A. V. Moroz. "Modular Switched Mode Power Supply For Diode-Pumped Lasers." Photonics Russia 13, no. 1 (2019): 42–47. http://dx.doi.org/10.22184/fros.2019.13.1.42.47.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bunlaksananusorn, C., D. E. Macpherson, and F. Fisher. "Voltage-injection control for switched-mode power-supply applications." IEE Proceedings - Electric Power Applications 147, no. 6 (2000): 486. http://dx.doi.org/10.1049/ip-epa:20000640.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Singh, Shikha, Bhim Singh, G. Bhuvaneswari, and Vashist Bist. "Improved Power Quality Switched-Mode Power Supply Using Buck–Boost Converter." IEEE Transactions on Industry Applications 52, no. 6 (November 2016): 5194–202. http://dx.doi.org/10.1109/tia.2016.2600675.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Singh, Shikha, Bhim Singh, G. Bhuvaneswari, and Vashist Bist. "Power Factor Corrected Zeta Converter Based Improved Power Quality Switched Mode Power Supply." IEEE Transactions on Industrial Electronics 62, no. 9 (September 2015): 5422–33. http://dx.doi.org/10.1109/tie.2015.2415752.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Goff, Daniel T., Steve J. A. Majerus, and Walter Merrill. "A 200 °C Quad-Output Buck Type Switched Mode Power Supply IC." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2014, HITEC (January 1, 2014): 000022–27. http://dx.doi.org/10.4071/hitec-ta16.

Full text
Abstract:
A high temperature (&gt;200 °C), quad-output, buck type switched-mode power supply (SMPS) IC capable of operating over a wide input supply range of 6 V to 15 V is described. The IC is a compact power supply solution for multi-voltage microprocessors, sensors, and actuators. The SMPS topology is a 112 kHz fixed-frequency, synchronous buck converter with slope compensation. A novel internal feedback design enables the output voltages to be pin-programmed to one of three common supply voltages—5 V, 3.3 V, or 1.8 V—while an external resistor divider can also be used for arbitrary voltage programming. Integrated power supply output MOSFET switches minimize the external part count and synchronous rectification reduces power dissipation and improves current capacity. The IC was fabricated in a conventional, low-cost, 0.5 μm bulk CMOS foundry process. Patented circuit design techniques allow the IC to operate in excess of 200 °C and circuit operation was demonstrated at ambient temperatures up to 225 °C. The foundry process is optimized for 5 V applications, however, the IC accepts input voltages up to 15 V and can produce outputs up to 10 V by utilizing extended drain single- and double-sided NMOS and PMOS transistors for the linear regulator pass transistor, error amplifier, and SMPS switches. The high-side FETs are controlled through capacitive coupled level shift circuits to ensure the gate-oxide voltage limits are not exceeded while still maintaining fast signal transitions. The IC also includes a tunable, 25 MHz monolithic oscillator that is programmable over a SPI serial interface. The oscillator bias current is comprised of a programmable constant-gm bias current and a programmable PTAT bias current. The programmability can be used to set the oscillation frequency, but can also be used together with a calibration curve on a microcontroller to achieve a more stable oscillation frequency over temperature. The output current of the quad SMPS was limited to 70 mA by a lower than expected saturation current of the extended-drain PMOS switch devices. The system showed good line regulation (&lt;0.1%) and 50% load step response stability (+/− 100 mV) at a nominal output current of 50 mA when tested at 200 °C ambient.
APA, Harvard, Vancouver, ISO, and other styles
9

Sasikala, K., and R. Krishna Kumar. "An Improved Power Factor Correction for Interleaved Flyback Switched Mode Power Supply." International Journal of Engineering & Technology 7, no. 3.27 (August 15, 2018): 166. http://dx.doi.org/10.14419/ijet.v7i3.27.17752.

Full text
Abstract:
Nowadays the use of electronic equipment finds a progressive development in the modern world. Hence it becomes a mandate to check whether the harmonic content of line current of any electronic device which is connected to the ac supply meets the appropriate standards. This demand is satisfied by implementing the Power Factor Correction (PFC) circuit in order to make the input current to be in sinusoidal in nature and in-phase with the input voltage. Numerous solutions are available to make the line current almost sinusoidal. This paper deals with the inclusion of passive PFC in the interleaved Fly back SMPS to improve the power factor. The proposed work also examines the reduction of current ripple at the output using interleaved converter.
APA, Harvard, Vancouver, ISO, and other styles
10

Miyazaki, T., K. Yamauchi, S. Arakawa, Y. Yoshizawa, and S. Nakajima. "Development of amorphous toroidal core for switched mode power supply." Bulletin of the Japan Institute of Metals 26, no. 4 (1987): 299–301. http://dx.doi.org/10.2320/materia1962.26.299.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Switched mode power supply"

1

Reddy, Amarnath. "Expert system based switched mode power supply design." Thesis, University of Edinburgh, 1997. http://hdl.handle.net/1842/12842.

Full text
Abstract:
The design of power electronic systems requires wide ranging expertise in complex and often tedious tasks, such as the design of the power circuit, selection of power semiconductor devices, design of the feedback loop, design of wound components, and design for Electromagnetic Compatibility (EMC). Many of the tasks rely heavily on the experience of the designer, and cannot be solved analytically. This makes the design iterative, time consuming, and heavily dependent on the designer's experience. At present, circuit simulation packages such as SPICE or SABER are used to test a design in software. Even with these tools, it is still necessary to build a prototype to verify the design, usually followed by several test-modify-retest cycles before a final design is reached. This process involves considerable decision making, which requires substantial expertise in all aspects of power electronics. This thesis investigates the use of expert system technology, one of many artificial intelligence techniques, to assist in the design of power electronic systems. Faster design times and a more efficient design are among the advantages that can be achieved using an expert system based design. In this study, Switched Mode Power Supplies have been chosen as a typical power electronic system. An expert system (developed using wxCLIPS) has been linked with a circuit simulator (SPICE), extensive databases and a graphical display system to provide a comprehensive design environment. The techniques used in the system cover all facets of the design: preliminary circuit design, component selection, circuit simulation, control loop design, and design for EMC. Extensive knowledge bases covering the various design rules are built into the expert system. The design methodology aims to give a near complete system design with an optimum configuration produced at minimum time and cost. The investigated techniques could readily be adapted to other power electronic applications, such as Uninterruptible Power Supplies and motor drives.
APA, Harvard, Vancouver, ISO, and other styles
2

Gartner, Andy Michael. "The development of a 100 KHZ switched-mode power supply." Thesis, Cape Technikon, 1991. http://hdl.handle.net/20.500.11838/1168.

Full text
Abstract:
Thesis (Masters Diploma (Electricity Engineering) -- Cape Technikon, Cape Town,1991
At the time of the design the maximum allowable operating frequency for an output power of between 200 and 250 watts was 100 kHz. Although a 600 kHz operating frequency could have been achieved, it would only be at a very low output power level. To maximise the current components available, a 210 watt 100 kHz direct-off-line switched-mode power supply was developed. The design presented can be used to power any compatible IBM XT/AT personal computer. The prototype was tested. An overall efficiency of 61% was achieved. The final prototype required 1 521 cm3 and weighed approximately 980 g, representing a power to volume ratio of 0.14 W/cm3 (2.26 W/inch3). Detailed procedures are also presented to help with the design and selection of the reactive components. Special design features include the half-bridge push-pull topology, MOSFETS as power switches, digital current limiting, primary power limiting, multiple outputs and fault counting to name but a few.
APA, Harvard, Vancouver, ISO, and other styles
3

Nuttall, Daniel Robert. "Advanced high frequency switched-mode power supply techniques and applications." Thesis, University of Manchester, 2011. https://www.research.manchester.ac.uk/portal/en/theses/advanced-high-frequency-switchedmode-power-supply-techniques-and-applications(5792cb86-58e3-488b-b27e-559c18e55250).html.

Full text
Abstract:
This Thesis examines the operation and dynamic performance of a single-stage, single-switch power factor corrector, S4 PFC, with an integrated magnetic device, IM. Also detailed isthe development and analysis of a high power light emitting diode, HP LED, power factorcorrection converter and proposed voltage regulation band control approach.The S4 PFC consists of a cascaded discontinuous current mode, DCM, boost stage anda continuous current mode, CCM, forward converter. The S4 PFC achieves a high powerfactor, low input current harmonics and a regulated voltage output, utilising a singleMOSFET. A steady-state analysis of the S4 PFC with the IM is performed, identifying theoperating boundary conditions for the DCM power factor correction stage and the CCMoutput voltage regulation stage. Integrated magnetic analysis focuses on understanding theperformance, operation and generated flux paths within the IM core, ensuring the device doesnot affect the normal operation of the converter power stage. A design method for the S4 PFCwith IM component is developed along with a cost analysis of this approach. Analysis predictsthe performance of the S4 PFC and the IM, and the theoretical work is validated by MATLABand SABER simulations and measurements of a 180 W prototype converter.It is not only the development of new topological approaches that drives theadvancement of power electronic techniques. The recent emergence of HP LEDs has led to aflurry of new application areas for these devices. A DCM buck-boost converter performs thepower factor correction and energy storage, and a cascaded boundary conduction current modebuck converter regulates the current through the LED arrays. To match the useful operatinglifetime of the HP LEDs, electrolytic capacitors are not used in the PFC converter. Analysisexamines the operation and dynamic characteristics of a PFC converter with low capacitiveenergy storage capacity and its implications on the control method. A modified regulationband control approach is proposed to ensure a high power factor, low input current harmonicsand output voltage regulation of the PFC stage. Small signal analysis describes the dynamicperformance of the PFC converter, Circle Criterion is used to determine the loop stability.Theoretical work is validated by SABER and MATLAB simulations and measurements of a180 W prototype street luminaire.
APA, Harvard, Vancouver, ISO, and other styles
4

Petkov, Roumen Dimitrov. "High power switched mode magnetron power supply systems for industrial microwave heating applications." Thesis, Teesside University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259645.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chew, W. M. "Optimum electromagnetic design for wound components in SMPS applications." Thesis, University of Bath, 1989. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.328339.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Devine, Phillip John. "A controllable, variable waveform, high voltage, switched mode power supply for electrostatic precipitators." Thesis, University of Leicester, 2000. http://hdl.handle.net/2381/30176.

Full text
Abstract:
Increased awareness of the effects of atmospheric pollution has meant that electrostatic precipitators, which have been used since the early part of this century to separate particulate matter from process gas streams, are now required to achieve particulate collection efficiencies in excess of 99.7% for a number of processes. Increasingly stringent legislation concerning industrial particulate emissions has challenged the precipitation industry to consider how equipment can be improved to reduce, in particular, heavy metal and respirable size particulate discharges. Electrostatic precipitators charge dust particles in a gas stream by corona-producing electrodes, and remove the charged particles by electrostatic attraction under high electric fields. This thesis details the development of a prototype high frequency (20KHz), high voltage (50kV), high power (25 kW) switched mode precipitator power supply with technological advances over conventional units. A high frequency, high voltage, high power precipitator supply using high frequency inverter technology coupled to a novel ferrite cored, high voltage transformer-rectifier unit has been designed and built. It is capable of delivering in a controlled and responsive way 25kW at 50kV into a load that may suffer from sparking and flashover. The developmental stages of the prototype from initial concept through to field trials of the supply at a power station in the UK are detailed.
APA, Harvard, Vancouver, ISO, and other styles
7

Wong, Fu Keung, and n/a. "High Frequency Transformer for Switching Mode Power Supplies." Griffith University. School of Microelectronic Engineering, 2004. http://www4.gu.edu.au:8080/adt-root/public/adt-QGU20050211.110915.

Full text
Abstract:
A power supply is an essential part of all electronic devices. A switching mode power supply is a light weight power solution for most modern electronic equipment. The high frequency transformer is the backbone of modern switched mode power supplies. The skin effect and proximity effects are major problems in high frequency transformer design, because of induced eddy currents. These effects can result in transformers being destroyed and losing their power transferring function at high frequencies. Therefore, eddy currents are unwanted currents in high frequency transformers. Leakage inductance and the unbalanced magnetic flux distribution are two further obstacles for the development of high frequency transformers. Winding structures of power transformers are also a critical part of transformer design and manufacture, especially for high frequency applications. A new planar transformer with a helical winding structure has been designed and can maintain the advantages of existing planar transformers and significantly reduce the eddy currents in the windings. The maximum eddy current density can be reduced to 27% of the density of the planar transformer with meander type winding structure and 33% of the density of the transformer with circular spiral winding structure at an operating frequency of 1MHz. The voltage ratio of the transformer with helical winding structure is effectively improved to 150% of the voltage ratio of the planar transformer with circular spiral coils. With the evenly distributed magnetic flux around the winding, the planar transformer with helical winding structure is excellent for high frequency switching mode power supplies in the 21st Century.
APA, Harvard, Vancouver, ISO, and other styles
8

Wong, Fu Keung. "High Frequency Transformer for Switching Mode Power Supplies." Thesis, Griffith University, 2004. http://hdl.handle.net/10072/367650.

Full text
Abstract:
A power supply is an essential part of all electronic devices. A switching mode power supply is a light weight power solution for most modern electronic equipment. The high frequency transformer is the backbone of modern switched mode power supplies. The skin effect and proximity effects are major problems in high frequency transformer design, because of induced eddy currents. These effects can result in transformers being destroyed and losing their power transferring function at high frequencies. Therefore, eddy currents are unwanted currents in high frequency transformers. Leakage inductance and the unbalanced magnetic flux distribution are two further obstacles for the development of high frequency transformers. Winding structures of power transformers are also a critical part of transformer design and manufacture, especially for high frequency applications. A new planar transformer with a helical winding structure has been designed and can maintain the advantages of existing planar transformers and significantly reduce the eddy currents in the windings. The maximum eddy current density can be reduced to 27% of the density of the planar transformer with meander type winding structure and 33% of the density of the transformer with circular spiral winding structure at an operating frequency of 1MHz. The voltage ratio of the transformer with helical winding structure is effectively improved to 150% of the voltage ratio of the planar transformer with circular spiral coils. With the evenly distributed magnetic flux around the winding, the planar transformer with helical winding structure is excellent for high frequency switching mode power supplies in the 21st Century.
Thesis (PhD Doctorate)
Doctor of Philosophy (PhD)
School of Microelectronic Engineering
Full Text
APA, Harvard, Vancouver, ISO, and other styles
9

Vuckovic, Ashlee. "The effects of varying the frequency of a switched mode power supply controlled DC motor." Thesis, Vuckovic, Ashlee (2015) The effects of varying the frequency of a switched mode power supply controlled DC motor. Other thesis, Murdoch University, 2015. https://researchrepository.murdoch.edu.au/id/eprint/28661/.

Full text
Abstract:
In industry DC machines are still used today due to their torque-speed characteristics [1]. The DC motors speed characteristics can be further enhanced by the addition of external electronic controls, such as buck converters. [2]. However, the addition of these external electronic controls to the DC motor also adds a complexity to these type of systems and problems can also arise from these buck converter/DC motor configurations [2]. This thesis examines the complexities that arise from these type of systems, in particular how these complexities effect that the speed-torque characteristics of a separately excited DC Motor may have during Discontinuous Conduction Mode (DCM) and Continuous Conduction Mode (CCM). To demonstrate the affects that Discontinuous Conduction Mode and Continuous Conduction Mode has on the speed-torque characteristics of a DC motor, a setup was designed and constructed with the following design objectives: • Convert AC power from mains to regulated DC power, using a power supply that must: o Supply power to a DC motor o Operate with a variable switching frequency from a few Hz – 2 kHz o Operate with a variable voltage from 0 – 240 V o And have a maximum current output of 1.5 A • The setup must be able to measure the speed, load torque, the armature current and voltage waveforms must also be observable and produce speed-torque curves of the DC motor Once completed, the setup was used to examine the speed-torque characteristics of the DC motor setup. The setup was able to meet all the design objectives. The results from the setup demonstrated a nonlinear region during DCM operation and a linear region CCM operation, in speed-torque curves of the setup. The main observations from the setup showed that the torque-speed curves experienced a larger nonlinear region at lower switching frequencies when compared to the torque-speed curves of systems that were operating at higher frequencies. Additionally, it was found that at higher voltages, the speed-torque curves experienced a smaller linear region when compared with the speed-torque curves of systems at lower voltages. Further analysis revealed the speed characteristic of the system was mainly caused by dramatic voltage drops over the armature of the motor, and that the dramatic voltage drops occurred during DCM, when load was applied to the motor. A simulation of the final setup was produced, although the simulation model could benefit from further improvements and modifications. The model was able to demonstrate some general trend that was observed in the results section. The setup was also adapted for future use as teaching aid that was aimed at 3rd year engineering students at Murdoch University. The purpose of the setup was to contribute to the student’s basic understandings of motor operation during DCM and CCM. A student laboratory exercise was successfully completed as part of project objectives. The project setup can be replicated in a laboratory environment and used to demonstrate the effects that DCM and CCM, have speed-torque characteristics of a DC Motor Overall, this project was considered to be successful, as all the objectives were completed during the course of the thesis project.
APA, Harvard, Vancouver, ISO, and other styles
10

Doss, Gary Richard Jr. "Novel Intelligent Power Supply Using A Modified Pulse Width Modulator." Wright State University / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=wright1253576739.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Switched mode power supply"

1

Chetty, P. R. K. Switch-mode power supply design. Blue Ridge Summit, PA: Tab Professional and Reference Books, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Whittington, H. W. Switched mode power supplies: Design and construction. 2nd ed. Taunton, Somerset, England: Research Studies Press, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

W, Flynn B., and Macpherson D. E, eds. Switched mode power supplies: Design and construction. Taunton, England: Research Studies Press, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ahmed, Mohammad. Sliding mode control for switched mode power supplies. Lappeenranta: Lappeenranta University of Technology, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kilgenstein, Otmar. Switched-mode power supplies in practice. Chichester: J. Wiley, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Nave, Mark J. Power line filter design for switched-mode power supplies. 2nd ed. Ter Gainesville, FL: Mark Nave Consultants, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Power line filter design for switched-mode power supplies. New York: Van Nostrand Reinhold, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Corradini, Luca, Dragan Maksimović, Paolo Mattavelli, and Regan Zane. Digital Control of High-Frequency Switched-Mode Power Converters. Hoboken, NJ, USA: John Wiley & Sons, Inc, 2015. http://dx.doi.org/10.1002/9781119025498.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Baronijan, Armen. CSI power supply system in stand alone mode. Ottawa: National Library of Canada, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zuev, Sergey, Ruslan Maleev, and Aleksandr Chernov. Energy efficiency of electrical equipment systems of autonomous objects. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1740252.

Full text
Abstract:
When considering the main trends in the development of modern autonomous objects (aircraft, combat vehicles, motor vehicles, floating vehicles, agricultural machines, etc.) in recent decades, two key areas can be identified. The first direction is associated with the improvement of traditional designs of autonomous objects (AO) with an internal combustion engine (ICE) or a gas turbine engine (GTD). The second direction is connected with the creation of new types of joint-stock companies, namely electric joint-stock companies( EAO), joint-stock companies with combined power plants (AOKEU). The energy efficiency is largely determined by the power of the generator set and the battery, which is given to the electrical network in various driving modes. Most of the existing methods for calculating power supply systems use the average values of disturbing factors (generator speed, current of electric energy consumers, voltage in the on-board network) when choosing the characteristics of the generator set and the battery. At the same time, it is obvious that when operating a motor vehicle, these parameters change depending on the driving mode. Modern methods of selecting the main parameters and characteristics of the power supply system do not provide for modeling its interaction with the power unit start-up system of a motor vehicle in operation due to the lack of a systematic approach. The choice of a generator set and a battery, as well as the concept of the synthesis of the power supply system is a problem studied in the monograph. For all those interested in electrical engineering and electronics.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Switched mode power supply"

1

Gupta, Gourab Sen, and Subhas Chandra Mukhopadhyay. "Embedded Microcontroller Based Switched Mode Power Supply: A Student Project." In Lecture Notes in Electrical Engineering, 103–26. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-13636-8_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yousfi, Driss, Hajji Bekkay, Mohamed El Hafyani, Mustapha Kourchi, Hassan Mohssine, Nasrudin Abd Rahim, and Jeyraj Selvaraj. "Design, Simulation and Implementation of an Isolated Switched-Mode Power Supply." In Lecture Notes in Electrical Engineering, 350–56. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-1405-6_43.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Aihua, Wang. "Design of Switch Mode Power Supply for ESP." In Electrostatic Precipitation, 348–49. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-89251-9_69.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hancock, Jon M. "Proposed Architecture for SiC Switches and Diodes in a Switch Mode Power Supply." In Materials Science Forum, 1011–14. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-442-1.1011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yin, Yi-lin, Rui-peng Chen, and Xi-ming Cheng. "The Research of Full-Bridge and Current Double Rectifier Switched-Mode Power Supply for Vehicle." In The 19th International Conference on Industrial Engineering and Engineering Management, 1387–99. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-38391-5_147.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Baghaz, E., A. Naamane, and N. K. M’sirdi. "Design of a Switch-Mode Power Supply with Soft Switching and Analog Control." In Lecture Notes in Electrical Engineering, 524–32. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-1405-6_61.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pokryvailo, Alex, Costel Carp, and Cliff Scapellati. "Highly Efficient Switch-Mode 100 kV, 100 kW Power Supply for ESP Applications." In Electrostatic Precipitation, 284–88. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-89251-9_55.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Williams, B. W. "Switched-mode Power Supplies." In Power Electronics, 309–29. London: Macmillan Education UK, 1987. http://dx.doi.org/10.1007/978-1-349-18525-2_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chaker, Mohammed, Driss Yousfi, Bekkay Hajji, Mustapha Kourchi, Mohamed Ajaamoum, Ahmed Belarabi, Nasrudin Abd Rahim, and Jeyrage Selvaraj. "Design and Implementation of a Photovoltaic Emulator Using an Insulated Full Bridge Converter Based Switch Mode Power Supply." In Lecture Notes in Electrical Engineering, 531–41. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-6259-4_56.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Perreault, David J., Charles R. Sullivan, and Juan M. Rivas. "GaN in Switched-Mode Power Amplifiers." In Integrated Circuits and Systems, 181–223. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-77994-2_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Switched mode power supply"

1

Blanaru, Constantin. "Switched-mode laser power supply." In ROMOPTO 2000: Sixth Conference on Optics, edited by Valentin I. Vlad. SPIE, 2001. http://dx.doi.org/10.1117/12.432809.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kim, Byungcheul, Eui-Seok Jeon, and Chan Kim. "LED Lighting System Switched-Mode Power Supply." In 2012 Spring Congress on Engineering and Technology (S-CET). IEEE, 2012. http://dx.doi.org/10.1109/scet.2012.6342026.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Strelkov, Vladimir F., Elena N. Sosnina, Andrey B. Dar'enkov, Andrey V. Shalukho, and Ivan A. Lipuzhin. "Switched-Mode Power Supply for Control System." In 2019 6th International Conference on Control, Decision and Information Technologies (CoDIT). IEEE, 2019. http://dx.doi.org/10.1109/codit.2019.8820621.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Hongyu, David Pommerenke, Weifeng Pan, Shuai Xu, Huasheng Ren, Fantao Meng, and Xinghai Zhang. "Conducted EMI simulation of switched mode power supply." In 2009 IEEE International Symposium on Electromagnetic Compatibility - EMC 2009. IEEE, 2009. http://dx.doi.org/10.1109/isemc.2009.5284634.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Macpherson, D. E. "Expert system based switched mode power supply design." In 6th International Conference on Power Electronics and Variable Speed Drives. IEE, 1996. http://dx.doi.org/10.1049/cp:19960960.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pramada, P., and C. K. Gowrishankara. "Switched mode power supply based Solar Array unit." In 2013 International Conference on Circuits, Power and Computing Technologies (ICCPCT). IEEE, 2013. http://dx.doi.org/10.1109/iccpct.2013.6528967.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Arnaudov, Dimitar, Vladimir Dimitrov, and Georgi Zashev. "AC-Domain Comparison of Switched Mode Power Supply." In 2021 IEEE 62nd International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON). IEEE, 2021. http://dx.doi.org/10.1109/rtucon53541.2021.9711683.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Singh, Shikha, G. Bhuvaneswari, and Bhim Singh. "A power factor corrected two stage switched mode power supply." In 2012 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). IEEE, 2012. http://dx.doi.org/10.1109/pedes.2012.6484480.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

More, Sushant M., D. R. Patil, and Priyanka S. Patil. "Power Quality Improved Bridgeless Multiple Output Switched Mode Power Supply." In 2018 International Conference on Advances in Communication and Computing Technology (ICACCT). IEEE, 2018. http://dx.doi.org/10.1109/icacct.2018.8529354.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Postiglione, Cicero S., Arnaldo J. Perin, and Claudinor B. Nascimento. "A single-stage power factor correction switched mode power supply." In 2007 European Conference on Power Electronics and Applications. IEEE, 2007. http://dx.doi.org/10.1109/epe.2007.4417764.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Switched mode power supply"

1

Chris Hutchens and Vijay Madhuravasal. 275 C Downhole Switched-Mode Power Supply. Office of Scientific and Technical Information (OSTI), August 2008. http://dx.doi.org/10.2172/947861.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Petit, Vincent. Road to a rapid transition to sustainable energy security in Europe. Schneider Electric Sustainability Research Institute, October 2022. http://dx.doi.org/10.58284/se.sri.bcap9655.

Full text
Abstract:
Decarbonization and energy security in Europe are two faces of the same coin. They are both related to the large dependency of the European Union economy on fossil fuels, which today represent around 70% of the total supply of energy. The bulk of these energy resources are imported, with Russia being the largest supplier, accounting for 40% of natural gas and 27% of oil imports. However, fossil fuels are also the primary root cause of greenhouse gas emissions, and the European Union is committed to reduce those by 55% by 2030 (versus 1990). This report is based on the landmark research from the Joint Research Center of the European Commission, the “Integrated Database of the European Energy Sector”, which for the first time mapped actual energy uses for each country within the European Union, across 17 sectors of activity, with data granularity at the level of each process step (or end-use) of each of these sectors. Our approach here has been to systematically review these process steps (or end-uses) and qualify the extent to which they could be electrified, effectively removing the demand for fossil fuels as a result. We have focused only on those process steps where technology was already widely available and for which we evaluated the switch to be relatively easy (or attractive). In other words, we estimated the impact of rapid electrification of “easy to abate” activities. The conclusion of this evaluation is that the share of electricity demand in the final energy mix could jump from around 20% today to 50%, which would drive a reduction in emissions at end-use of around 1,300 MtCO2 /y, as well as a drop in natural gas and oil supply of around 50%. As a result of such transformation, electricity demand would nearly double, with the bulk of that growth materializing in the building sector. Short-term, the challenge of addressing climate targets while providing for energy security is thus intimately connected to buildings. While such transition would certainly require major infrastructure upgrades, which may prove a roadblock to rapid deployment, we find that the combination of energy efficiency measures (notably digital) and distributed generation penetration (rooftop solar) could significantly tame the issue, and hence help accelerate the move away from fossil fuels, with energy spend savings as high as 80% across some building types; a major driver of change. Beyond this, further potential exists for electrification. Other measures on the demand-side will include deeper renovations of the industrial stock (notably in the automotive, machinery, paper, and petrochemical industries for which our current assessment may be underestimated) and further electrification of mobility (trucks). The transition of the power system away from coal (and ultimately natural gas) will then also play a key role, followed ultimately by feedstocks substitution in industry. Some of these transitions are already on the way and will likely bring further improvements. The key message, however, is that a significant opportunity revolves around buildings to both quickly decarbonize and reduce energy dependencies in Europe. Rapid transformation of the energy system may be more feasible than we think. We notably estimate that, by 2030, an ambitious and focused effort could help displace 15% to 25% of natural gas and oil supply and reduce emissions by around 500 MtCO2 /y (note that these savings would come on top of additional measures regarding energy efficiency and flexibility, which are not the object of this study). For this to happen, approximately 100 million buildings will need renovating, and a similar number of electric vehicles would need to hit the road.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Switched mode power supply' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography