Relevant bibliographies by topics / Surface impedance

Academic literature on the topic 'Surface impedance'

Author: Grafiati
Published: 4 June 2021
Last updated: 14 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Surface impedance.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Surface impedance"

1

Zhu, Y., A. Bossavit, and S. Zouhdi. "Surface impedance models for high impedance surfaces." Applied Physics A 103, no. 3 (January 6, 2011): 677–83. http://dx.doi.org/10.1007/s00339-010-6201-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mende, F. F., A. I. Spitsyn, N. A. Kochkonyan, and A. V. Skugarevski. "Surface impedance of real superconducting surfaces." Cryogenics 25, no. 1 (January 1985): 10–12. http://dx.doi.org/10.1016/0011-2275(85)90086-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

EKREN, Nazmi, and Ali Samet SARKIN. "Semi-conductor Applications to Printed Circuits on Flexible Surfaces." Balkan Journal of Electrical and Computer Engineering 10, no. 3 (July 30, 2022): 273–77. http://dx.doi.org/10.17694/bajece.1094805.

Full text
Abstract:
The most common type of identification system today is RFID. RFID circuits are used as covered with plastic. With the increase in usage areas, it is also used on metal, wood, paper, and plastic product. In this study, the behavior of the same circuit on different surfaces was investigated. The surface impedance and signal reflection coefficients of RFID tag antennas were investigated based on paper, plastic, and textile surfaces. According to the results of the electrical and mechanical tests, the best results in terms of reflectance coefficients and surface impedances of RFID tags are on PET surfaces. The surface impedance and the reflection coefficients were high on paper surfaces. The lowest values were measured on textile surfaces. According to the results, it has been seen that RFID antenna application on plastic, paper, and textile surfaces is possible and usable.
APA, Harvard, Vancouver, ISO, and other styles
4

Patel, Amit M., and Anthony Grbic. "Effective Surface Impedance of a Printed-Circuit Tensor Impedance Surface (PCTIS)." IEEE Transactions on Microwave Theory and Techniques 61, no. 4 (April 2013): 1403–13. http://dx.doi.org/10.1109/tmtt.2013.2252362.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tou, H., Y. Nakai, M. Doi, M. Sera, H. Sugawar, and H. Sato. "Surface impedance studies of ()." Physica B: Condensed Matter 378-380 (May 2006): 209–10. http://dx.doi.org/10.1016/j.physb.2006.01.078.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Foley, Kyle J., Xiaonan Shan, and N. J. Tao. "Surface Impedance Imaging Technique." Analytical Chemistry 80, no. 13 (July 2008): 5146–51. http://dx.doi.org/10.1021/ac800361p.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

kaduskar, Vikas, and Shantanu Jagdale. "Analysis of High Impedance Surface Dimensions on Microstrip Patch Antenna." International Journal of Engineering and Technology 4, no. 6 (2012): 790–93. http://dx.doi.org/10.7763/ijet.2012.v4.485.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Waddington, D. C., and R. J. Orlowski. "Determination of Acoustical Impedance of Absorbing Surfaces by Two-Microphone Transfer Function Techniques: Effect of Absorption Mechanism." Building Acoustics 4, no. 2 (June 1997): 99–115. http://dx.doi.org/10.1177/1351010x9700400203.

Full text
Abstract:
In the third of a series of papers on the measurement of acoustical impedance of absorbing surfaces using the two-microphone transfer function technique, the influence of surface absorption mechanism upon the measured impedance is described. The results from measurements of the impedance of bulk reactors are compared with values obtained from theoretical models. Materials investigated are an inhomogeneous polyurethane foam, a distributed resonance absorber, and a twin layer foam. This paper also investigates how the measurement technique behaves with samples which are bulk reacting and have surface roughness. A rough surfaced polyurethane foam sample is used. The results indicate that at frequencies for which the surface irregularities are small in comparison to the wavelength, the material can be accurately characterised by the acoustical impedance acting at an effective plane. For higher frequencies it is thought that the measuring technique becomes inaccurate due to scattering of sound by the surface roughness, and the consequent breakdown of the sound field prediction methods.
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Qiang, and Kai Ming Li. "Surface waves over a convex impedance surface." Journal of the Acoustical Society of America 106, no. 5 (November 1999): 2345–57. http://dx.doi.org/10.1121/1.428072.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Chun-Feng, and Christopher Liner. "Wavelet-based detection of singularities in acoustic impedances from surface seismic reflection data." GEOPHYSICS 73, no. 1 (January 2008): V1—V9. http://dx.doi.org/10.1190/1.2795396.

Full text
Abstract:
Although the passage of singularity information from acoustic impedance to seismic traces is now well understood, it remains unanswered how routine seismic processing, mode conversions, and multiple reflections can affect the singularity analysis of surface seismic data. We make theoretical investigations on the transition of singularity behaviors from acoustic impedances to surface seismic data. We also perform numerical, wavelet-based singularity analysis on an elastic synthetic data set that is processed through routine seismic processing steps (such as stacking and migration) and that contains mode conversions, multiple reflections, and other wave-equation effects. Theoretically, seismic traces can be approximated as proportional to a smoothed version of the [Formula: see text] derivative of acoustic impedance,where [Formula: see text] is the vanishing moment of the seismic wavelet. This theoretical approach forms the basis of linking singularity exponents (Hölder exponents) in acoustic impedance with those computable from seismic data. By using wavelet-based multiscale analysis with complex Morlet wavelets, we can estimate singularity strengths and localities in subsurface impedance directly from surface seismic data. Our results indicate that rich singularity information in acoustic impedance variations can be preserved by surface seismic data despite data-acquisition and processing activities. We also show that high-resolution detection of singularities from real surface seismic data can be achieved with a proper choice of the scale of the mother wavelet in the wavelet transform. Singularity detection from surface seismic data thus can play a key role in stratigraphic analysis and acoustic impedance inversion.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Surface impedance"

1

Aude, Diana Prado Lopes. "Modeling superconductors using surface impedance techniques." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/61254.

Full text
Abstract:
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Physics, 2010.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 53-54).
This thesis develops a simulation tool that can be used in conjunction with commercially available electromagnetic simulators to model the behavior of superconductors over a wide range of frequencies. This simulation method can be applied to metals both in the normal and superconducting state and is based on calculating surface impedance as a function of temperature, frequency and material parameters (such as the coherence length and the normal state conductivity). The surface impedance calculations apply the Mattis Bardeen and Zimmermann formulations of conductivity for superconductors to classical transmission line theory. When the tool is used with the Zimmermann formulation, it can model the behavior of superconductors with arbitrary purity, including very clean superconductors, which cannot be handled correctly by the Mattis Bardeen conductivity approach used in current simulators such as SuperMix [1]. Simulations were performed using the developed tool with Ansoft's HFSS EM simulator. The results for a copper printed circuit board resonator showed very good agreement with measured data, attesting to the soundness of the transmission line theory used to develop this tool. A microfabricated niobium coplanar waveguide resonator - for use in quantum computing applications - was also modeled and simulations gave the expected results for the electric field distributions and the variation of Q with temperature and capacitive coupling. The tool developed here can therefore be used to predict the electromagnetic behavior of a superconducting device as function of the material parameters, operating temperature and frequency. With measurements of the device's Q at a recorded frequency and temperature, this tool can also be used to determine the mean free path of the material (assuming other material parameters such as coherence length, transition temperature (Tc) and the ratio of the energy gap to kBTc are known). Equivalently, if all material parameters are known, comparison of Q measurements with simulation results can be used to determine the operating temperature, which may otherwise be difficult to measure in cryogenic environments.
by Diana Prado Lopes Aude.
S.B.
APA, Harvard, Vancouver, ISO, and other styles
2

Porch, Adrian. "Microwave surface impedance of YBa₂Cu₃O₇." Thesis, University of Cambridge, 1992. https://www.repository.cam.ac.uk/handle/1810/283677.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Syropoulou, Stella. "AC Impedance Testing of Surface Treatments on Concrete." Thesis, Imperial College London, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.511869.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Xiao, Binping. "Surface Impedance of Superconducting Radio Frequency (SRF) Materials." W&M ScholarWorks, 2012. https://scholarworks.wm.edu/etd/1539623605.

Full text
Abstract:
Superconducting radio frequency (SRF) technology is widely adopted in particle accelerators. There remain many open questions, however, in developing a systematic understanding of the fundamental behavior of SRF materials, including niobium treated in different ways and various other bulk/thin film materials that are fabricated with different methods under assorted conditions. A facility that can measure the SRF properties of small samples in a range of 2∼40 K temperature is needed in order to fully answer these questions. The Jefferson Lab surface impedance characterization (SIC) system has been designed to attempt to meet this requirement. It consists of a sapphire-loaded cylindrical Nb TE011 cavity at 7.4 GHz with a 50 mm diameter flat sample placed on a non-contacting end plate and uses a calorimetric technique to measure the radio frequency (RF) induced heat on the sample. Driving the resonance to a known field on this surface enables one to derive the surface resistance of a relatively small localized area. TE011 mode identification has been done at room temperature and 4 K, and has been compared with Microwave StudioRTM and SuperFish simulation results. RF loss mechanisms in the SIC system are under investigation. A VCO phase lock loop system has been used in both CW and pulsed mode. Two calorimeters, with stainless steel and Cu as the thermal path material for high precision and high power versions, respectively, have been designed and commissioned for the SIC system to provide low temperature control and measurement. A power compensation method has been developed to measure the RF induced power on the sample. Simulation and experimental results show that with these two calorimeters, the whole thermal range of interest for SRF materials has been covered, The power measurement error in the interested power range is within 1.2% and 2.7% for the high precision and high power versions, respectively. Temperature distributions on the sample surface for both versions have been simulated and the accuracy of sample temperature measurements have been analysed. Both versions have the ability to accept bulk superconductors and thin film superconducting samples with a variety of substrate materials such as Al, A12O3, Cu, MgO, Nb and Si. Tests with polycrystalline and large grain bulk Nb samples have been done at impedance, least-squares fittings have been done using SuperFit2.0, a code developed by G. Ciovati and the author.;Microstructure analyses and SRF measurements of large scale epitaxial MgB2 films have been reported. MgB2 films on 5 cm dia. sapphire disks were fabricated by a Hybrid Physical Chemical Vapor Deposition (HPCVD) technique. The electron-beam backscattering diffraction (EBSD) results suggest that the film is a single crystal complying with a MgB2(0001)//A1 2O3(0001) epitaxial relationship. The SRF properties of different film thicknesses (200 nm and 350 nm) were evaluated using SIC system under different temperatures and applied fields at 7.4 GHz. A surface resistance of 9+/-2 muO has been observed at 2.2 K.;Based on BCS theory with moving Cooper pairs, the electron states distribution at 0K and the probability of electron occupation with finite temperature have been derived and applied to anomalous skin effect theory to obtain the surface impedance of a superconductor with moving Cooper pairs. We present the numerical results for Nb.
APA, Harvard, Vancouver, ISO, and other styles
5

Motta, Marcelo Jorge de Assis. "Equivalent impedance of rough surface at low grazing angles." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1999. http://handle.dtic.mil/100.2/ADA369420.

Full text
Abstract:
Thesis (M.S. in Electrical Engineering) Naval Postgraduate School, September 1999.
"September 1999". Thesis advisor(s): R. Janaswamy. Includes bibliographical references (p. 77). Also avaliable online.
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, Quan, and 陳全. "Efficient numerical modeling of random surface roughness for interconnect internal impedance extraction." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B3955708X.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tonkin, Bryan Anthony. "Microwave properties of bulk and thick film YBa←2Cu←3O←7←-←x superconductors." Thesis, University of Portsmouth, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.282543.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Abu, Bakar Mizarina. "Microwave properties of high temperature superconducting thin films." Thesis, University of Birmingham, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.289384.

Full text
Abstract:
One of the most exciting studies of contemporary physics is that of high temperature superconductor (HTS). Since its discovery, a large body of experimental and theoretical work by various groups has attempted to achieve a common understanding of this phenomenon. One of the main driving forces for applications centres on the possibility of new and improved microwave devices based on HTS materials, mainly due to the large reduction in the surface resistance that HTS has to offer. However, various problems need to be addressed before the use of HTS materials can be justified, for example fundamental issues such as the nonlinearity of these materials with respect to microwave power, which form the basis of this work. Microwave measurements were conducted on four magnetron sputtered and three laser ablated, Icm2 YBCO thin films, grown on LaAI03 and MgO substrates, respectively, employing the dielectric (rutile) resonator and coplanar resonator techniques. The low power response of the films was initially analysed, looking for clues to the underlying pairing mechanisms in these films. Power dependence and microwave intennodulation distortion (lMD) measurements were conducted between 12 K to 60 K to investigate the nonlinear response of the films, both in zero and finite dc (10 mT) fields. The effect of patterning on the microwave response of the films was also studied. From these measurements, it was observed that the microwave losses of these films are extrinsic in nature, probably a consequence of weak links/defects, and the results also show that films fabricated from the same technique can have significantly varying quality.
APA, Harvard, Vancouver, ISO, and other styles
9

Morgan, Benjamin. "Microwave surface impedance of YBa₂Cu₃O₆.₉₅ in the mixed state." Thesis, University of Cambridge, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.615118.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Baumeister, Carl Robert. "Electrochemical impedance spectroscopy and surface plasmon resonance for diagnostic antibody detection." Diss., University of Pretoria, 2012. http://hdl.handle.net/2263/31495.

Full text
Abstract:
The successful use of biomarker antibody detection for disease diagnosis is currently restricted to cases where the antibody affinity and specificity of interaction with antigen is high. Evanescent field biosensing, e.g. Surface Plasmon Resonance (SPR), and electrochemical detection, in particular Electrochemical Impedance Spectroscopy (EIS), have been shown viable for detection of lower affinity antibodies, based on the principle that these technologies allow the measurement of antibody binding to immobilized antigen, i.e. without the need to wash away excess, non-bound antibodies or using labelled antibodies. Proof of principle for this in the case of detection of biomarker anti-mycolic acid antibodies for TB diagnosis has been provided in the Mycolic acid Antibody Real-Time Inhibition assay (MARTI) by our research group. Although already patented and published, MARTI is not yet a feasible diagnostic test due to slow sample turn-around time, affordability and technical vulnerability associated with unstable lipid antigen surface chemistry and the difficulty of standardization of liposome carriers of mycolic acids used for measuring the binding inhibition of serum antibodies to immobilized antigen. Here, these challenges were addressed by investigating the use of a magnetic field for more stable lipid antigen immobilization, new phospholipid compositions to generate more stable liposome carriers for lipid antigen in solution and the use of screen-printed electrodes (SPE) in EIS to address affordability of diagnosis and improve sample turn-around time. The latter approach appeared quite promising in distinguishing a TB positive and a TB negative patient serum and is amenable to automation by means of a flow injection system.
Dissertation (MSc)--University of Pretoria, 2012.
Biochemistry
MSc
Unrestricted
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Surface impedance"

1

Balanis, Constantine A. Scattering patterns of dihedral corner reflectors with impedance surface impedances: Semiannual report. Hampton, VA: National Aeronautics and Space Administration, Langley Research Center, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yuferev, Sergey V. Surface impedance boundary conditions: A comprehensive approach. Boca Raton: Taylor & Francis, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Balanis, Constantine A. Interior impedance wedge diffraction with surface waves. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yuferev, Sergey V. Surface impedance boundary conditions: A comprehensive approach. Boca Raton: CRC Press/Taylor & Francis, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Powell, Jeffrey Richard. Microwave surface impedance of thin film high temperature superconductors. Birmingham: University of Birmingham, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kharel, Arish. Nonlinear microwave surface impedance of high temperature superconductor films. Birmingham: University of Birmingham, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

J, Luebbers Raymond, Kunz Karl S, and United States. National Aeronautics and Space Administration., eds. Wideband finite difference time domain implementation of surface impedance boundary conditions for good conductors. [Washington, DC: National Aeronautics and Space Administration, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

United States. National Aeronautics and Space Administration., ed. An investigation of the diffraction of an acoustic plane wave by a curved surface of finite impedance: A thesis. [Atlanta, Ga.?]: Georgia Institute of Technology, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

author, Zhu Ning Yan, and Institution of Engineering and Technology, eds. Scattering of waves by wedges and cones with impedance boundary conditions. Edison, NJ: Scitech Publishing, an imprint of the IET, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Louis, Abrahamson A., Jones Michael G, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Measured and calculated acoustic attenuation rates of tuned resonator arrays for two surface impedance distribution models with flow. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Surface impedance"

1

Kar, Durga P., Sankar Narayan Das, Praveen P. Nayak, and Satyanarayan Bhuyan. "Copper Conducting Surface: A Zero Impedance Surface." In Lecture Notes in Mechanical Engineering, 21–26. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4795-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bouche, Daniel, Frédéric Molinet, and Raj Mittra. "Calculation of the Surface Impedance, Generalization of the Notion of Surface Impedance." In Asymptotic Methods in Electromagnetics, 445–60. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-60517-8_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Maidanik, G., and L. J. Maga. "Surface Impedance Loading of Panels." In Aero- and Hydro-Acoustics, 363–70. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/978-3-642-82758-7_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Grüner, G. "Surface Impedance of High-Tc Superconductors." In Springer Series in Solid-State Sciences, 56–60. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84345-7_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Manara, G., S. Mugnaini, P. Nepa, and A. A. Serra. "Surface Wave Excitation at Edges in Anisotropic Impedance Surfaces." In Springer Proceedings in Physics, 25–34. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-07221-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gundersen, S. A., and J. Lothe. "A New Method for Surface Impedance and Surface Wave Calculations." In Springer Series on Wave Phenomena, 91–97. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-83508-7_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Senturia, Stephen D. "Chemical Microsensors Based on Surface Impedance Changes." In ACS Symposium Series, 166–76. Washington, DC: American Chemical Society, 1986. http://dx.doi.org/10.1021/bk-1986-0309.ch010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Schoenmaker, Wim. "Surface-Impedance Approximation to Solve RF Design Problems." In Computational Electrodynamics, 437–53. New York: River Publishers, 2022. http://dx.doi.org/10.1201/9781003337669-29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Jianguo, Nancy W. Downer, and H. Gilbert Smith. "Evaluation of Surface-Bound Membranes with Electrochemical Impedance Spectroscopy." In Advances in Chemistry, 491–510. Washington, DC: American Chemical Society, 1994. http://dx.doi.org/10.1021/ba-1994-0235.ch023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Miller, M. A., and V. I. Talanov. "The Use of the Surface Impedance Concept in the Theory of Electromagnetic Surface Waves." In Onde superficiali, 257–347. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-10983-6_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Surface impedance"

1

Stupakov, G. V. "Surface roughness impedance." In 19th Advanced ICFA beam dynamics workshop on physics of, and science with, the x-ray free-electron laser. AIP, 2001. http://dx.doi.org/10.1063/1.1401569.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Brudny, Vera L. "Exact calculations of surface impedance for periodic rough surfaces." In Surface Roughness and Scattering. Washington, D.C.: Optica Publishing Group, 1992. http://dx.doi.org/10.1364/surs.1992.sma5.

Full text
Abstract:
The concept of surface impedance has been widely used in electromagnetic theory of scattering. For a 2D scattering problem the impedance Z(x) on a surface ∑ can be defined as (1) where E║ and H║ represent the components of the electric and magnetic fields tangential to surface ∑, x is a coordinate on the surface and n^ the unit vector normal to it. If Z(x) is known, eq. (1) can be used as a boundary condition exactly equivalent to Maxwell’s, but since it is defined in terms of the fields this knowledge requires the complete solution of the scattering problem.
APA, Harvard, Vancouver, ISO, and other styles
3

Quarfoth, Ryan, and Daniel Sievenpiper. "Anisotropic surface impedance cloak." In 2012 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science Meeting. IEEE, 2012. http://dx.doi.org/10.1109/aps.2012.6349306.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Shanmugam, Jenusha, Mohanapriya Swaminathan, and Brian A. Lail. "THz impedance surface waveguides." In 2013 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. IEEE, 2013. http://dx.doi.org/10.1109/aps.2013.6711795.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gregoire, Daniel J. "Impedance modulation patterns for artificial-impedance-surface antennas." In 2013 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. IEEE, 2013. http://dx.doi.org/10.1109/aps.2013.6711828.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Long, Jiang, and Dan Sievenpiper. "Dispersion-reduced high impedance surface loaded with non-Foster impedances." In 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. IEEE, 2015. http://dx.doi.org/10.1109/aps.2015.7304420.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Stupakov, Gennady V. "Surface impedance and synchronous modes." In Workshop on instabilities of high intensity hadron beams in rings. AIP, 1999. http://dx.doi.org/10.1063/1.1301898.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Durgun, Ahmet C., Constantine A. Balanis, and Craig R. Birtcher. "Surface wave suppression properties of Perforated Artificial Impedance Surfaces." In 2013 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. IEEE, 2013. http://dx.doi.org/10.1109/aps.2013.6710705.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wei, Xing-Chang, Yu-Fei Shu, Jian-Bo Zhang, and Dong Wang. "Applications of high impedance surfaces for surface wave elimination." In 2016 URSI Asia-Pacific Radio Science Conference (URSI AP-RASC). IEEE, 2016. http://dx.doi.org/10.1109/ursiap-rasc.2016.7601333.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Polydorides, N. "Linearized Electrical Impedance Tomography." In Near Surface 2010 - 16th EAGE European Meeting of Environmental and Engineering Geophysics. European Association of Geoscientists & Engineers, 2010. http://dx.doi.org/10.3997/2214-4609.20144898.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Surface impedance"

1

Stupakov, Gennady. Surface Roughness Impedance. Office of Scientific and Technical Information (OSTI), December 2000. http://dx.doi.org/10.2172/784801.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Stupakov, Gennady. Surface Roughness Impedance. Office of Scientific and Technical Information (OSTI), December 2000. http://dx.doi.org/10.2172/784831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Stupakov, Gennady. Surface Impedance and Synchronous Modes. Office of Scientific and Technical Information (OSTI), July 1999. http://dx.doi.org/10.2172/10123.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Forman, Michael A. Meandered-line antenna with integrated high-impedance surface. Office of Scientific and Technical Information (OSTI), September 2010. http://dx.doi.org/10.2172/1008127.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bridges, T. J., G. Chen, and G. Crosta. Minimizing the Reflection of Electromagnetic Waves by Surface Impedance. Fort Belvoir, VA: Defense Technical Information Center, July 1986. http://dx.doi.org/10.21236/ada172585.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hylton, T. L., M. R. Beasley, A. Kapitulnik, John P. Carini, and Lawrence Drabeck. Surface Impedance Studies of the High Tc Oxide Superconductors. Fort Belvoir, VA: Defense Technical Information Center, August 1988. http://dx.doi.org/10.21236/ada228915.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dressel, M., O. Klein, S. Bruder, G. Gruener, K. D. Carlson, H. H. Wang, and J. M. Williams. Surface impedance studies on the electrodynamical response of organic superconductors. Office of Scientific and Technical Information (OSTI), November 1994. http://dx.doi.org/10.2172/10194728.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bane, Karl LF. The Resonator Impedance Model of Surface Roughness Applied to the LCLS Parameters. Office of Scientific and Technical Information (OSTI), March 1999. http://dx.doi.org/10.2172/9892.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

D. Zagidulin, P. Jakupi, J.J. Noel, and D.W. Shoesmith. Evaluation of an Oxide Layer on NI-CR-MO-W Alloy Using Electrochemical Impedance Spectroscopy and Surface Analysis. Office of Scientific and Technical Information (OSTI), December 2006. http://dx.doi.org/10.2172/899320.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kabakian, Adour. Tensor Impedance Surfaces. Fort Belvoir, VA: Defense Technical Information Center, November 2010. http://dx.doi.org/10.21236/ada566251.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Surface impedance' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography