Academic literature on the topic 'Surface analisy'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Surface analisy.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Surface analisy"
Nieć, Jakub, Anna Nieć, Paweł Zawadzki, and Marcin Spychała. "The time analysis of land surface pollution on the example of measurement of phenol’s concentration and the analysis of its decomposition." Acta Scientiarum Polonorum Formatio Circumiectus 14, no. 4 (2016): 75–84. http://dx.doi.org/10.15576/asp.fc/2015.14.4.75.
Full textMiranda, João Lucas Costa de. "ILEGALIDADES NO TRANSPORTE FRETADO DE PASSAGEIROS POR APLICATIVO EM LINHAS CONCEDIDAS NO ESTADO DE MINAS GERAIS." Revista Jurídica 20, no. 1 (February 5, 2021): 39–57. http://dx.doi.org/10.37951/2236-5788.2020v20i1.p39-57.
Full textKubišová, M., V. Pata, L. Sýkorová, L. Hýlová, and O. Šuba. "Multi-parameter surface-quality analysis." Materiali in tehnologije 52, no. 1 (February 2, 2018): 23–26. http://dx.doi.org/10.17222/mit.2017.095.
Full textFerdinandus, Aprildy Randy Andrew, and Santo Junital Bumbungan. "Analisis Pengaturan Quarter-Car Active Suspension Menggunakan Neuro-Fuzzy Adaptif PID Control." Jurnal Fokus Elektroda : Energi Listrik, Telekomunikasi, Komputer, Elektronika dan Kendali) 6, no. 4 (November 30, 2021): 203. http://dx.doi.org/10.33772/jfe.v6i4.21764.
Full textBorg, E. "Semantic Category and Surface Form." Analysis 58, no. 3 (July 1, 1998): 232–38. http://dx.doi.org/10.1093/analys/58.3.232.
Full textRahmawati, Anita, Dian Setiawan, Mohammad Aby Yansun Pangestu, and Robith Azkal Aulia. "ANALISIS KERUSAKAN JALAN MENGGUNAKAN PROGRAM KENPAVE TERHADAP TEBAL PERKERASAN YANG DIDESIGN MENGGUNAKAN METODE ANALISA KOMPONEN, AUSTROAD DAN ASPHALT INSTITUTE." Jurnal Media Teknik Sipil 16, no. 2 (December 31, 2018): 79. http://dx.doi.org/10.22219/jmts.v16i2.6428.
Full textTOPRAK, İnayet Burcu, Oğuz ÇOLAK, and Mustafa BAYHAN. "Tİ-6AL-4V ALAŞIMININ FREZELENMESİNDE YÜZEY PÜRÜZLÜLÜĞÜNÜN REGRESYON ANALİZİ İLE MODELLENMESİ." Mühendislik Bilimleri ve Tasarım Dergisi 10, no. 2 (June 30, 2022): 620–30. http://dx.doi.org/10.21923/jesd.886739.
Full textStošić, Nenad, Jelena Popović, Marija Anđelković-Apostolović, Aleksandar Mitić, Marija Nikolić, and Radomir Barac. "Ultrastructural analysis of the surface changes on the nickel-titanium endodontic instruments after multiple use." Acta Facultatis Medicae Naissensis 38, no. 3 (2021): 291–98. http://dx.doi.org/10.5937/afmnai38-29386.
Full textBryk, Maja. "Evaluation of Soil Aggregate Surface Roughness by Image Analysis." Soil Science Annual 63, no. 2 (June 1, 2012): 9–13. http://dx.doi.org/10.2478/v10239-012-0016-1.
Full textLeon, Stephen, G. Bharathiraja, and V. Jayakumar. "Experimental analysis on friction stir welding using flat-faced pins in AA2024-T3 plate." FME Transactions 49, no. 1 (2021): 78–86. http://dx.doi.org/10.5937/fme2101078s.
Full textDissertations / Theses on the topic "Surface analisy"
Beumier, Charles. "Authentification d'identité par analyse tridimensionnelle du visage." Phd thesis, Télécom ParisTech, 2003. http://pastel.archives-ouvertes.fr/pastel-00000620.
Full textBearzi, Yohann. "Analyse locale de surface avec la base des Wavejets : définition de nouveaux invariants intégraux et application à l'amplification de détails géométriques." Thesis, Lyon, 2019. http://www.theses.fr/2019LYSE1240.
Full textSurface analysis is a challenging research topic, which has gathered a lot of interest over the last few decades. When surface data is given as a set of points, which are the typical output of 3D laser scanners, the lack of structure makes it even more challenging. In this thesis, we tackle surface analysis by introducing a new function basis: the Wavejets. This basis allows to decompose locally the surface into a radial polynomial component and an angular frequency component. Stability properties with regards to a bad normal direction are demonstrated. By linking Wavejets coefficients to a high order differential tensor, we also define high order principal directions on the surface. Furthermore, locally splitting surfaces with respect to frequencies leads us to define new integral invariants, permitting to locally describe the surface. Such descriptors are quite robust since they result from an integration process. Finally, we develop an application of these new integral invariants for geometric detail amplification, either based on point position or on normal direction modification, creating in this case the illusion of a surface change
Bouyssel, François. "Analyse variationnelle des paramètres de surface." Toulouse 3, 2001. http://www.theses.fr/2001TOU30074.
Full textKhawaja, Zahra. "Analyse des états de surface en science des matériaux : caractérisation multi-échelles par ondelette et détermination de l'anisotropie des surfaces." Thesis, Compiègne, 2014. http://www.theses.fr/2014COMP2139/document.
Full textMonitoring and control of the state of the surfaces is a major need for industry. Numerous studies on the interactions between the surface morphology and the physical, chemical or mechanical mechanisms have been conducted. However, a more precise characterization related to industrial domains and needs is necessary. It consists in finding the most relevant roughness parameters that connect the topography of a surface with the physical phenomena which it undergoes or in the properties of the material of which it consisted.In this work, a software designed to characterize the surface condition was developed. This tool named "MesRug" allows to calculate roughness parameters then extract the most relevant ones and to define the most appropriate scale for a given application. The search for the most relevant parameters is done by a statistical approach (analysis of variance ANOVA combined with the theory of Bootstrap).A characterization was performed using (2D) data of measurement on abrasive surfaces. The influence of the form of discrete and continuous wavelet on the detection on the relevant scale mechanism of the abrasion was tested. We conclude that the wavelet decomposition allows to quantify and localize the scales of abrasion of the machining process for all process parameters. However, the relevance of appropriate scales to characterize abrasion does not depend on the shape of the wavelet.In this work, a new 3D roughness parameter is proposed to quantify the smoothness of a surface, independently of the amplitude and the scanning length units of the surface. The efficiency of this parameter is tested on noisy periodic surfaces with varying degrees of anisotropy. The value of this parameter is between zero (perfect sound) and 100 % (sine perfect surface). It enables us to identify the anisotropy directions of regularity for a given surface
Comard, Marie-Pierre. "Caractérisation de surfaces solides hétérogènes : étude du couplage de la chromatographie gazeuse inverse à dilution infinie avec la modification de surface par imprégnation contrôlée par des macromolécules." Vandoeuvre-les-Nancy, INPL, 2001. http://www.theses.fr/2001INPL586N.
Full textBen, Mansour Fathi. "Etude des phénomènes de surface et d'interface au cours de la croissance de couches minces de métaux nobles (Au, Ag, Cu) sur des surfaces réelles (100) de silicium et de germanium." Montpellier 2, 1990. http://www.theses.fr/1990MON20130.
Full textWieland, Sandra. "Modellierung und mathematische Analyse kontaminierter dünner Flüssigkeitsfilme." Bonn : Mathematisches Institut der Universität, 2003. http://catalog.hathitrust.org/api/volumes/oclc/62768196.html.
Full textFIGUEIREDO, SAVIO WESLLEY OLIVEIRA. "STRAIN SENSITIVITY ANALISYS OF A SURFACE ACOUSTIC WAVE RESONATOR DEVICE." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2017. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=33356@1.
Full textCOORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
PROGRAMA DE EXCELENCIA ACADEMICA
Os sensores de deformação convencionais, por exemplo, os strain gages resistivos e ópticos, consagrados pelo mercado, são empregados em diferentes ambientes e estruturas, oferecendo um nível de flexibilidade que permite sua integração a vários tipos de sistemas de medição. No entanto, requerem uma fonte de energia elétrica local ou não podem funcionar sem cabos, limitando o seu uso em alguns cenários, como em partes móveis de máquinas. Os dispositivos SAW (Surface Acoustic Wave) podem ser usados como sensores de deformação piezoelétricos, pois possuem sensibilidade à deformação e podem operar de forma passiva por meio de antenas, podendo ser integrados a sistemas de monitoramento sem fio. Seu funcionamento é baseado em ondas de superfície geradas em um meio piezoelétrico. O estado de tensão na superfície do meio altera as características dessas ondas e induz mudanças na frequência de operação. O presente trabalho analisou a sensibilidade à deformação de dispositivos SAW ressonadores feitos de quartzo ST-X com frequência central de 433,92 MHz colados com diferentes adesivos, e testou sua operação como sensores passivos sem fio. A metodologia incluiu testes de tração não destrutivos em diferentes temperaturas e também simulações com elementos finitos. Os resultados experimentais mostraram relação linear entre a variação de frequência dos ressonadores e as deformações aplicadas, concordando com a literatura. A interrogação sem fio foi bem sucedida, confirmando o grande potencial dessa tecnologia. Os resultados numéricos, combinados a um modelo teórico, foram próximos aos experimentais, validando o modelo numérico.
The conventional strain sensors, e.g., resistive and optical strain gages, established in the market, are deployed in different environments and structures, providing the flexibility of integration with different measurement systems. However, they require a local energy source to work or cables, limiting their use in some scenarios such as moving parts of machines. The SAW (Surface Acoustic Wave) devices can be used as piezoelectric strain sensors since they have sensitivity to strain, can operate passively by antennas and can be integrated to wireless monitoring systems. Its working principle is based on surface acoustic waves generated on piezolectric medium. The stress state of the medium changes the characteristics of these waves and induces changes in the operating frequency. The present work analyzed the strain sensitivity of SAW resonators made of ST-X cut quartz operating at a central frequency of 433,92 MHz, bonded with different adhesives, and tested their operation as passive wirelesss sensors. The methodology included non-destructive tensile testing at different temperature, and also finite elements simulations. The experimental results showed linear relation between the frequency change and the applied strain, agreeing with the literature. The wireless interrogations was successful, confirming the great potential of this technology. The numerical results, combined to a theoretical model, matched well the experiments, validating the model.
Li, Wan-Chiu. "Conversion automatique de maillages en surfaces splines." Thesis, Vandoeuvre-les-Nancy, INPL, 2006. http://www.theses.fr/2006INPL078N/document.
Full textAiming at converting a triangular mesh into a CAGD/CAM spline surface, this thesis focuses on one of the most crucial problems of the conversion process, i.e. extracting a “good” quadrilateral control mesh of the surface. What we mean by good is that the edges of the control mesh should be orthogonal and aligned with the principal directions of curvature of the surface. These two properties make the control mesh optimum in an approximation point of view, and greatly help to reduce unwanted oscillations on the final spline surface built from it. To solve this problem, we propose a new automatic algorithm, called periodic global parameterization. The basic idea is to find a “geometry-meaningful” parameterization guided by a pair of orthogonal anisotropic direction fields. Then, the iso-value lines of this parameterization will be extracted to define an initial control mesh, that satisfies the two criteria of a good control mesh. With the initial control mesh, we explain how to construct a T-spline approximation of the initial triangulated surface. We show several examples of the triangular mesh to T-spline conversion. The results show that thanks to the anisotropic control meshes, the final spline surfaces generated have much less oscillations as compared to results of previous methods, that do not take into account of the anisotropy
Soysouvanh, Davy. "Mesure optique de la topographie des papiers." Grenoble INPG, 2007. http://www.theses.fr/2007INPG0081.
Full textSeveral stages in the manufacturing process of paper aim to improve the surface quality. The reason is that several important properties of paper, such as the brightness or the friction, enormously depend on the surface, just as the quality of the printing. The traditional methods to characterize pa pers are based on flows of air on their surface. However, those appear to be too much limited and do not allow to access the topography. We evaluated severa 1 optical methods of measurement of microtopography and we adopted the full-field method of white light interferometry. While working on the optics and on the algorithms of measurement, we adapted the method to the very specifie case of rough and strongly diffusing surfaces. The instrument that has been developped is used today in several applications and on various materials met in the paper mi Il, where it allows simple measurements, precisely and very rapidly
Books on the topic "Surface analisy"
Wieczorowski, Michał. Wykorzystanie analizy topograficznej w pomiarach nierówności powierzchni. Poznań: Wydawn. Politechniki Poznańskiej, 2000.
Find full textWieczorowski, Michał. Wykorzystanie analizy topograficznej w pomiarach nierówności powierzchni. Poznań: Wydawn. Politechniki Poznańskiej, 2000.
Find full textJ, Pesek Joseph, Leigh Ivan E, Royal Society of Chemistry (Great Britain)., and Symposium on Chemically Modified Surfaces (5th : 1993 : Malvern, Penn.), eds. Chemically modified surfaces. Cambridge: Royal Society of Chemistry, 1994.
Find full textTubielewicz, Krzysztof. Analiza zjawisk towarzyszących odkształceniu warstwy wierzchniej w procesie nagniatania. Częstochowa: Wydawn. Politechniki Częstochowskiej, 1990.
Find full textA, Delchar T., ed. Modern techniques of surface science. Cambridge [Cambridgeshire]: Cambridge University Press, 1986.
Find full textA, Delchar T., ed. Modern techniques of surface science. 2nd ed. Cambridge: Cambridge University Press, 1994.
Find full textC, Rivière J., and Myhra S. 1943-, eds. Handbook of surface and interface analysis methods for problem-solving. 2nd ed. Boca Raton: Taylor & Francis, 2009.
Find full text1947-, Kohli Rajiv, and Mittal K. L. 1945-, eds. Developments in surface contamination and cleaning: Fundamentals and applied aspects. Norwich, NY, U.S.A: W. Andrew Pub., 2008.
Find full textT, Hubbard Arthur, ed. The Handbook of surface imaging and visualization. Boca Raton: CRC Press, 1995.
Find full text1941-, MacDonald R. J., Taglauer E, and Wandelt K. 1944-, eds. Surface science: Principles and current applications. Berlin: Springer, 1996.
Find full textBook chapters on the topic "Surface analisy"
Shustorovich, Evgeny. "Cluster-Surface Analogy: New Developments." In Quantum Chemistry: The Challenge of Transition Metals and Coordination Chemistry, 445–64. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4656-9_32.
Full textCandy, Jean-Pierre, Christophe Copéret, and Jean-Marie Basset. "Analogy between Surface and Molecular Organometallic Chemistry." In Surface and Interfacial Organometallic Chemistry and Catalysis, 151–210. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/b138076.
Full textWu, Dong Jiang, Xian Suo Cao, Hang Gao, and Ren Ke Kang. "Surface Damage Analyse of KDP Crystal Grinding." In Advanced Materials Research, 349–54. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-461-8.349.
Full textYakovlev, Andrey B., and Valeriya S. Federyaeva. "Analytical Solution for the Electric Field Response Generated by a Nonconducting Ellipsoid (Prolate Spheroid) in a Conducting Fluid Subject to an External Electric Field." In Brain and Human Body Modeling 2020, 383–89. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-45623-8_22.
Full textChoi, K. S. "Breakdown of the Reynolds Analogy over Drag-Reducing Riblets Surface." In Advances in Turbulence IV, 149–54. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1689-3_25.
Full textLin, Yuxu, Chun Chen, Mingli Song, Jiajun Bu, and Zicheng Liu. "Implicit Surface Reconstruction with an Analogy of Polar Field Model." In Advances in Image and Video Technology, 436–48. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-92957-4_38.
Full textGohin, F. "Analyse Structurale de La Temperature de Surface de La Mer." In Geostatistics, 433–44. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-015-6844-9_33.
Full textZheng, Feidong, Xueyi Li, Fan Zhang, and Ping Mu. "Evolution of Undular Surges in a Navigation Channel." In Lecture Notes in Civil Engineering, 394–405. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-6138-0_35.
Full textDolbeault, Pierre, and Gennadi Henkin. "Surfaces de Riemann de bord donne dans CPn." In Contributions to Complex Analysis and Analytic Geometry / Analyse Complexe et Géométrie Analytique, 163–87. Wiesbaden: Vieweg+Teubner Verlag, 1994. http://dx.doi.org/10.1007/978-3-663-14196-9_6.
Full textBradshaw, A. M. "Can we Put the Cluster-Surface Analogy on a Sound Structural Basis?" In The Synergy Between Dynamics and Reactivity at Clusters and Surfaces, 1–20. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0133-2_1.
Full textConference papers on the topic "Surface analisy"
Karron. "Mathematical Analysk Of "spiderweb" Surface Construction Algorithm." In Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE, 1992. http://dx.doi.org/10.1109/iembs.1992.594807.
Full textPopa, Gabriel Nicolae, Corina Maria Dinis, Ioan Baciu, and Sorin Ioan Deaconu. "Automotive PM Surface Alternator, Analyse with Experiments." In 2021 International Conference on Applied and Theoretical Electricity (ICATE). IEEE, 2021. http://dx.doi.org/10.1109/icate49685.2021.9465009.
Full textBhattacharya, Sayak, and Kushal Shah. "Pitfalls in the analogy between spoof surface plasmon and surface plasmon polariton." In International Conference on Fibre Optics and Photonics. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/photonics.2014.s5a.47.
Full textWELLS, VALANA. "Integrating the acoustic analogy for supersonic rotating surfaces." In 12th Aeroacoustic Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1989. http://dx.doi.org/10.2514/6.1989-1133.
Full textFrey, Christian, Graham Ashcroft, Jan Backhaus, Edmund Ku¨geler, and Jens Wellner. "Adjoint-Based Flow Sensitivity Analyis Using Arbitrary Control Surfaces." In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-45041.
Full textRanganathan, Soundararajan, Hari Nishok Rangasamy Suguna Thangaraj, Aravind Kumar Vasudevan, and Dharshan Karthick Shanmugan. "Analogy of Thermal Properties of Polyamide 6 Reinforced with Glass Fiber and Glass Beads through FDM Process." In International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2019. http://dx.doi.org/10.4271/2019-28-0137.
Full textWood, C. M., T. B. Ellis, D. P. Teague, and B. R. Cox. "Analyst I: Comprehensive Analysis of the UTexas1 Surface Wave Dataset." In Geo-Congress 2014. Reston, VA: American Society of Civil Engineers, 2014. http://dx.doi.org/10.1061/9780784413272.080.
Full textMartin, A. J. "Analyst H: Analysis of the Active and Passive UTexas1 Surface Wave Dataset Collected to Quantify Inter-Analyst Uncertainty." In Geo-Congress 2014. Reston, VA: American Society of Civil Engineers, 2014. http://dx.doi.org/10.1061/9780784413272.079.
Full textMichaels, P. "Analyst A: Alternatives in Analysis of the UTexas1 Surface Wave Dataset." In Geo-Congress 2014. Reston, VA: American Society of Civil Engineers, 2014. http://dx.doi.org/10.1061/9780784413272.074.
Full textMoss, Robb Eric S. "Analyst B: Analysis of the UTexas1 Passive Linear Surface Wave Dataset." In Geo-Congress 2014. Reston, VA: American Society of Civil Engineers, 2014. http://dx.doi.org/10.1061/9780784413272.075.
Full textReports on the topic "Surface analisy"
Tanika, Lisa, Betha Lusiana, and Adis Hendriatna. Simulasi Dampak Perubahan Tutupan Lahan dan Iklim di DAS Citarum Hulu dengan Model GenRiver: Kalibrasi model dan analisa sensitivitas. World Agroforestry, 2020. http://dx.doi.org/10.5716/wp20048.pdf.
Full textThomas, Douglas, and Mellon Michael. Sublimation of terrestrial permafrost and the implications for ice-loss processes on Mars. Engineer Research and Development Center (U.S.), July 2021. http://dx.doi.org/10.21079/11681/41244.
Full textBorrett, Veronica, Melissa Hanham, Gunnar Jeremias, Jonathan Forman, James Revill, John Borrie, Crister Åstot, et al. Science and Technology for WMD Compliance Monitoring and Investigations. The United Nations Institute for Disarmament Research, December 2020. http://dx.doi.org/10.37559/wmd/20/wmdce11.
Full textÀ la croisée des chemins: Tendances dominantes dans la reconnaissance des droits fonciers communautaires entre 2002 et 2017. Rights and Resources Initiative, September 2018. http://dx.doi.org/10.53892/qpej4692.
Full text