Log in

Relevant bibliographies by topics / Surface acoustic wave sensor

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Surface acoustic wave sensor'

Author: Grafiati

Published: 1 July 2022

Last updated: 25 January 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Surface acoustic wave sensor.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Surface acoustic wave sensor"

1

da Cunha, Mauricio Pereira. "Surface acoustic wave sensor." Journal of the Acoustical Society of America 120, no. 5 (2006): 2397. http://dx.doi.org/10.1121/1.2395087.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kalantar-Zadeh, Kourosh, and Wojtek Wlodarski. "Surface acoustic wave sensor." Journal of the Acoustical Society of America 120, no. 5 (2006): 2409. http://dx.doi.org/10.1121/1.2395140.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Länge, Kerstin. "Bulk and Surface Acoustic Wave Sensor Arrays for Multi-Analyte Detection: A Review." Sensors 19, no. 24 (December 6, 2019): 5382. http://dx.doi.org/10.3390/s19245382.

Full text

Abstract:

Bulk acoustic wave (BAW) and surface acoustic wave (SAW) sensor devices have successfully been used in a wide variety of gas sensing, liquid sensing, and biosensing applications. Devices include BAW sensors using thickness shear modes and SAW sensors using Rayleigh waves or horizontally polarized shear waves (HPSWs). Analyte specificity and selectivity of the sensors are determined by the sensor coatings. If a group of analytes is to be detected or if only selective coatings (i.e., coatings responding to more than one analyte) are available, the use of multi-sensor arrays is advantageous, as the evaluation of the resulting signal patterns allows qualitative and quantitative characterization of the sample. Virtual sensor arrays utilize only one sensor but combine it with enhanced signal evaluation methods or preceding sample separation, which results in similar results as obtained with multi-sensor arrays. Both array types have shown to be promising with regard to system integration and low costs. This review discusses principles and design considerations for acoustic multi-sensor and virtual sensor arrays and outlines the use of these arrays in multi-analyte detection applications, focusing mainly on developments of the past decade.

APA, Harvard, Vancouver, ISO, and other styles

4

Talbi, A., F. Sarry, O. Elmazria, M. B. Assouar, L. Bouvot, and P. Alnot. "Surface Acoustic Wave Pressure Sensor." Ferroelectrics 273, no. 1 (January 2002): 53–58. http://dx.doi.org/10.1080/00150190211800.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Oglesby, Donald M., Billy T. Upchurch, Bradley D. Leighty, James P. Collman, Xumu Zhang, and P. C. Hermann. "Surface Acoustic Wave Oxygen Sensor." Analytical Chemistry 66, no. 17 (September 1994): 2745–51. http://dx.doi.org/10.1021/ac00089a023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Caliendo, C., E. Verona, A. D'Amico, A. Furlani, G. Iucci, and M. V. Russo. "Surface acoustic wave humidity sensor." Sensors and Actuators B: Chemical 16, no. 1-3 (October 1993): 288–92. http://dx.doi.org/10.1016/0925-4005(93)85197-i.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Cook, James D. "Encapsulated surface acoustic wave sensor." Journal of the Acoustical Society of America 121, no. 5 (2007): 2482. http://dx.doi.org/10.1121/1.2739144.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Dierkes, M., and U. Hilleringmann. "Telemetric surface acoustic wave sensor for humidity." Advances in Radio Science 1 (May 5, 2003): 131–33. http://dx.doi.org/10.5194/ars-1-131-2003.

Full text

Abstract:

Abstract. Surface acoustic wave sensors consist of a piezoelectric substrate with metal interdigital transducers (IDT) on top. The acoustic waves are generated on the surface of the substrate by a radio wave, as it is well known in band pass filters. The devices can be used as wireless telemetric sensors for temperature and humidity, transmitting the sensed signal as a shift of the sensor’s resonance frequency.

APA, Harvard, Vancouver, ISO, and other styles

9

Hejczyk, Tomasz, Marian Urbańczyk, Tadeusz Pustelny, and Wiesław Jakubik. "Numerical and Experimental Analysis of the Response of a SAW Structure with WO3 Layers on Action of Carbon Monoxide." Archives of Acoustics 40, no. 1 (March 1, 2015): 19–24. http://dx.doi.org/10.1515/aoa-2015-0003.

Full text

Abstract:

Abstract The paper presents the results of an analysis of gaseous sensors based on a surface acoustic wave (SAW) by means of the equivalent model theory. The applied theory analyzes the response of the SAW sensor in the steady state affected by carbon monoxide (CO) in air. A thin layer of WO3 has been used as a sensor layer. The acoustical replacing impedance of the sensor layer was used, which takes into account the profile of the concentration of gas molecules in the layer. Thanks to implementing the Ingebrigtsen equation, the authors determined analytical expressions for the relative changes of the velocity of the surface acoustic wave in the steady state. The results of the analysis have shown that there is an optimum thickness of the layer of CO sensor at which the acoustoelectric effect (manifested here as a change in the acoustic wave velocity) is at its highest. The theoretical results were verified and confirmed experimentally

APA, Harvard, Vancouver, ISO, and other styles

10

Sonner, Maximilian M., Farhad Khosravi, Lisa Janker, Daniel Rudolph, Gregor Koblmüller, Zubin Jacob, and Hubert J. Krenner. "Ultrafast electron cycloids driven by the transverse spin of a surface acoustic wave." Science Advances 7, no. 31 (July 2021): eabf7414. http://dx.doi.org/10.1126/sciadv.abf7414.

Full text

Abstract:

Spin-momentum locking is a universal wave phenomenon promising for applications in electronics and photonics. In acoustics, Lord Rayleigh showed that surface acoustic waves exhibit a characteristic elliptical particle motion strikingly similar to spin-momentum locking. Although these waves have become one of the few phononic technologies of industrial relevance, the observation of their transverse spin remained an open challenge. Here, we observe the full spin dynamics by detecting ultrafast electron cycloids driven by the gyrating electric field produced by a surface acoustic wave propagating on a slab of lithium niobate. A tubular quantum well wrapped around a nanowire serves as an ultrafast sensor tracking the full cyclic motion of electrons. Our acousto-optoelectrical approach opens previously unknown directions in the merged fields of nanoacoustics, nanophotonics, and nanoelectronics for future exploration.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Surface acoustic wave sensor"

1

Haskell, Reichl B. "A Surface Acoustic Wave Mercury Vapor Sensor." Fogler Library, University of Maine, 2003. http://www.library.umaine.edu/theses/pdf/HaskellRB2003.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gizeli, Electra. "New acoustic wave sensor geometries." Thesis, University of Cambridge, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.282004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sehra, Gurmukh S. "Surface acoustic wave based flavour sensor system." Thesis, University of Warwick, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.416148.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Banerjee, Markus K. "Acoustic wave interactions with viscous liquids spreading in the acoustic path of a surface acoustic wave sensor." Thesis, Nottingham Trent University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.302521.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Parmar, Biren Jagadish. "Development Of Point-Contact Surface Acoustic Wave Based Sensor System." Thesis, Indian Institute of Science, 2006. https://etd.iisc.ac.in/handle/2005/279.

Full text

Abstract:

Surface Acoustic Waves (SAW) fall under a special category of elastic waves that need a material medium to propagate. The energy of these waves is confined to a limited depth below the surface over which they propagate, and their amplitudes decay with increasing depth. As a consequence of their being a surface phenomenon, they are easily accessible for transduction. Due to this reason, a lot of research has been carried out in the area, which has resulted in two very popular applications of SAW - SAW devices and in Non-Destructive Testing and Evaluation. A major restriction of SAW devices is that the SAW need a piezoelectric medium for generation, propagation and reception. This thesis reports the attempt made to overcome this restriction and utilize the SAW on non-piezoelectric substrates for sensing capabilities. The velocity of the SAW is known to be dependent purely on the material properties, specifically the elastic constants and material density. This dependence is the motivation for the sensor system developed in the present work. Information on the survey of the methods suitable for the generation and reception of SAW on non-piezoelectric substrates has been included in the thesis. This is followed by the theoretical and practical details of the method chosen for the present work - the point source/point receiver method. Advantages of this method include a simple and inexpensive fabrication procedure, easy customizability and the absence of restrictions due to directivity of the SAW generated. The transducers consist of a conically shaped PZT element attached to a backing material. When the piezoelectric material on the transmitter side is electrically excited, they undergo mechanical oscillations. When coupled to the surface of a solid, the oscillations are transferred onto the solid, which then acts as a point source for SAW. At the receiver, placed at a distance from the source on the same side, the received mechanical oscillations are converted into an electrical signal as a consequence of the direct piezoelectric effect. The details of the fabrication and preliminary trials conducted on metallic as well as non-metallic samples are given. Various applications have been envisaged for this relatively simple sensor system. One of them is in the field of pressure sensing. Experiments have been carried out to employ the acoustoelastic property of a flexible diaphragm made of silicone rubber sheet to measure pressure. The diaphragm, when exposed to a pressure on one side, experiences a varying strain field on the surface. The velocity of SAW generated on the stressed surface varies in accordance with the applied stress, and the consequent strain field generated. To verify the acoustoelastic phenomenon in silicone rubber, SAW velocities have been measured in longitudinal and transverse directions with respect to that of the applied tensile strain. Similar measurements are carried out with a pressure variant inducing the strain. The non-invasive nature of this setup lends it to be used for in situ measurement of pressure. The second application is in the field of elastography. Traditional methods of diagnosis to detect the presence of sub-epidermal lesions, some tumors of the breast, liver and prostate, intensity of skin irritation etc have been mainly by palpation. The sensor system developed in this work enables to overcome the restrictive usage and occasional failure to detect minute abnormal symptoms. In vitro trials have been conducted on tissue phantoms made out of poly (vinyl alcohol) (PVA-C) samples of varying stiffnesses. The results obtained and a discussion on the same are presented.

APA, Harvard, Vancouver, ISO, and other styles

6

Parmar, Biren Jagadish. "Development Of Point-Contact Surface Acoustic Wave Based Sensor System." Thesis, Indian Institute of Science, 2006. http://hdl.handle.net/2005/279.

Full text

Abstract:

Surface Acoustic Waves (SAW) fall under a special category of elastic waves that need a material medium to propagate. The energy of these waves is confined to a limited depth below the surface over which they propagate, and their amplitudes decay with increasing depth. As a consequence of their being a surface phenomenon, they are easily accessible for transduction. Due to this reason, a lot of research has been carried out in the area, which has resulted in two very popular applications of SAW - SAW devices and in Non-Destructive Testing and Evaluation. A major restriction of SAW devices is that the SAW need a piezoelectric medium for generation, propagation and reception. This thesis reports the attempt made to overcome this restriction and utilize the SAW on non-piezoelectric substrates for sensing capabilities. The velocity of the SAW is known to be dependent purely on the material properties, specifically the elastic constants and material density. This dependence is the motivation for the sensor system developed in the present work. Information on the survey of the methods suitable for the generation and reception of SAW on non-piezoelectric substrates has been included in the thesis. This is followed by the theoretical and practical details of the method chosen for the present work - the point source/point receiver method. Advantages of this method include a simple and inexpensive fabrication procedure, easy customizability and the absence of restrictions due to directivity of the SAW generated. The transducers consist of a conically shaped PZT element attached to a backing material. When the piezoelectric material on the transmitter side is electrically excited, they undergo mechanical oscillations. When coupled to the surface of a solid, the oscillations are transferred onto the solid, which then acts as a point source for SAW. At the receiver, placed at a distance from the source on the same side, the received mechanical oscillations are converted into an electrical signal as a consequence of the direct piezoelectric effect. The details of the fabrication and preliminary trials conducted on metallic as well as non-metallic samples are given. Various applications have been envisaged for this relatively simple sensor system. One of them is in the field of pressure sensing. Experiments have been carried out to employ the acoustoelastic property of a flexible diaphragm made of silicone rubber sheet to measure pressure. The diaphragm, when exposed to a pressure on one side, experiences a varying strain field on the surface. The velocity of SAW generated on the stressed surface varies in accordance with the applied stress, and the consequent strain field generated. To verify the acoustoelastic phenomenon in silicone rubber, SAW velocities have been measured in longitudinal and transverse directions with respect to that of the applied tensile strain. Similar measurements are carried out with a pressure variant inducing the strain. The non-invasive nature of this setup lends it to be used for in situ measurement of pressure. The second application is in the field of elastography. Traditional methods of diagnosis to detect the presence of sub-epidermal lesions, some tumors of the breast, liver and prostate, intensity of skin irritation etc have been mainly by palpation. The sensor system developed in this work enables to overcome the restrictive usage and occasional failure to detect minute abnormal symptoms. In vitro trials have been conducted on tissue phantoms made out of poly (vinyl alcohol) (PVA-C) samples of varying stiffnesses. The results obtained and a discussion on the same are presented.

APA, Harvard, Vancouver, ISO, and other styles

7

Friedlander, Jeffrey B. "Wireless Strain Measurement with Surface Acoustic Wave Sensors." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1306874020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kaplan, Emrah. "Surface acoustic wave enhanced electroanalytical sensors." Thesis, University of Glasgow, 2015. http://theses.gla.ac.uk/6557/.

Full text

Abstract:

In the last decade, miniaturised “lab-on-a-chip” (LOC) devices have attracted significant interest in academia and industry. LOC sensors for electrochemical analysis now commonly reach picomolar in sensitivities, using only microliter-sized samples. One of the major drawbacks of this platform is the diffusion layer that appears as a limiting factor for the sensitivity level. In this thesis, a new technique was developed to enhance the sensitivity of electroanalytical sensors by increasing the mass transfer in the medium. The final device design was to be used for early detection of cancer diseases which causes bleeding in the digestive system. The diagnostic device was proposed to give reliable and repeatable results by additional modifications on its design. The sensitivity enhanced-sensor model was achieved by combining the surface acoustic wave (SAW) technology with the electroanalytical sensing platform. The technique was practically tested on a diagnostic device model and a biosensing platform. A novel, substrate (TMB) based label-free Hb sensing method is developed and tested. Moreover, the technique was further developed by changing the sensing process. Instead of forming the sensitive layer on the electrodes it was localised on polystyrene wells by a rapid one-step process. Results showed that the use of acoustic streaming, generated by SAW, increases the current flow and improves the sensitivity of amperometric sensors by a factor of 6 while only requiring microliter scale sample volumes. The heating and streaming induced by the SAW removes the small random contributions made by the natural convection and temperature variation which complicate the measurements. Therefore, the method offers stabilised conditions for more reliable and repeatable measurements. The label-free detection technique proved to be giving relevant data, according to the hemoglobin concentration. It has fewer steps than ELISA and has only one antibody. Therefore, it is quick and the cross-reactivity of the second antibody is eliminated from the system. The additional modifications made on the technique decreased the time to prepare the sensing platform because the passivation steps (i.e., pegylation), prior to structuring a sensitive layer were ignored. This avoidance also increased the reliability and repeatability of the measurements.

APA, Harvard, Vancouver, ISO, and other styles

9

Fisher, Brian. "Surface Acoustic Wave (SAW) Cryogenic Liquid and Hydrogen Gas Sensors." Doctoral diss., University of Central Florida, 2012. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/5208.

Full text

Abstract:

This research was born from NASA Kennedy Space Center's (KSC) need for passive, wireless and individually distinguishable cryogenic liquid and H2 gas sensors in various facilities. The risks of catastrophic accidents, associated with the storage and use of cryogenic fluids may be minimized by constant monitoring. Accidents involving the release of H2 gas or LH2 were responsible for 81% of total accidents in the aerospace industry. These problems may be mitigated by the implementation of a passive (or low-power), wireless, gas detection system, which continuously monitors multiple nodes and reports temperature and H2 gas presence. Passive, wireless, cryogenic liquid level and hydrogen (H2) gas sensors were developed on a platform technology called Orthogonal Frequency Coded (OFC) surface acoustic wave (SAW) radio frequency identification (RFID) tag sensors. The OFC-SAW was shown to be mechanically resistant to failure due to thermal shock from repeated cycles between room to liquid nitrogen temperature. This suggests that these tags are ideal for integration into cryogenic Dewar environments for the purposes of cryogenic liquid level detection. Three OFC-SAW H2 gas sensors were simultaneously wirelessly interrogated while being exposed to various flow rates of H2 gas. Rapid H2 detection was achieved for flow rates as low as 1ccm of a 2% H2, 98% N2 mixture. A novel method and theory to extract the electrical and mechanical properties of a semiconducting and high conductivity thin-film using SAW amplitude and velocity dispersion measurements were also developed. The SAW device was shown to be a useful tool in analysis and characterization of ultrathin and thin films and physical phenomena such as gas adsorption and desorption mechanisms.?
Ph.D.
Doctorate
Electrical Engineering and Computer Science
Engineering and Computer Science
Electrical Engineering

APA, Harvard, Vancouver, ISO, and other styles

10

Andrade, Santos Marlo. "Wireless system for passive surface acoustic wave sensors." Electronic Thesis or Diss., Bordeaux, 2024. http://www.theses.fr/2024BORD0146.

Full text

Abstract:

Avec les progrès du développement des appareils connectés et de l’Internet des objets (IoT), la surveillance continue des paramètres physiques et chimiques est devenue un défi actuel pour notre société.De plus, les dispositifs à ondes acoustiques de surface (SAW), largement utilisés comme filtres dans les télécommunications, remplissent désormais la fonction de capteurs.C’est dans ces deux contextes que se situent les travaux de cette thèse.L'objectif est de développer un système de lecture sans fil utilisant l'un de ces capteurs, notamment le capteur à ondes de Love (Love Wave ou LW) à sensibilité reconnue en milieu liquide. Peu de travaux impliquent ce dispositif en effectuant une lecture à distance, et exclusivement en utilisant sa réponse acoustique. Dans cette thèse, nous employons une approche plus générale considérant sa réponse électromagnétique et un protocole spécifique de mesure et d'acquisition de données pour détecter des solutions salines à sa surface. Compte tenu de sa nature passive, un système de lecture sans fil est présenté, ainsi qu'une discussion sur ses principales caractéristiques, avantages, inconvénients et limites
With the advancement in the development of connected devices and the Internet of Things (IoT), continuous monitoring of physical and chemical parameters has become a current challenge for our society. Additionally, surface acoustic wave (SAW) devices, widely used as filters in telecommunications, now serve the function of sensors.It is within these two contexts that the work of this thesis is situated. The goal is to develop a wireless reading system using one of these sensors, particularly the Love Wave (LW) sensor with recognized sensitivity in liquid media. Few studies involve this device by performing a remote reading, and exclusively using its acoustic response.In this thesis, we employ a more general approach considering its electromagnetic response and a specific measurement and data acquisition protocol for detecting saline solutions on its surface. Given its passive nature, a wireless reading system is demonstrated, as well as discussion on its key characteristics, advantages, disadvantages, and limitations

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Surface acoustic wave sensor"

1

Stephen, Ballantine David, ed. Acoustic wave sensors: Theory, design, and physico-chemical applications. San Diego: Academic Press, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

C, Stone David, ed. Surface-launched acoustic wave sensors: Chemical sensing and thin-film characterization. New York: Wiley, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Glennie, Derek John. Fiber optic sensors for the detection of surface acoustic waves on metals. [Downsview, Ont.]: University of Toronto, [Institute for Aerospace Studies], 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Datta, Supriyo. Surface acoustic wave devices. Englewood Cliffs, N.J: Prentice-Hall, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hashimoto, Ken-ya. Surface Acoustic Wave Devices in Telecommunications. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-662-04223-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Rosenbaum, Joel F. Bulk acoustic wave theory and devices. Boston: Artech House, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Morgan, David P. Surface-wave devices for signal processing. 2nd ed. Amsterdam: Elsevier, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

P, Morgan David. Surface-wave devices for signal processing. Amsterdam: Elsevier, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Campbell, Colin. Surface acoustic wave devices and their signal processing applications. Boston: Academic Press, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Glennie, Derek John. Fiber optic sensors for the detection of surface acoustics waves on metals. Ottawa: National Library of Canada, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Surface acoustic wave sensor"

1

Baumann, Peter. "Surface Acoustic Wave Devices." In Selected Sensor Circuits, 245–75. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-38212-4_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Rashid, Md Hasnat, Ahmed Sidrat Rahman Ayon, and Md Jahidul Haque. "Surface Acoustic Wave Sensors." In Handbook of Nanosensors, 929–59. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-47180-3_70.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Rashid, Md Hasnat, Ahmed Sidrat Rahman Ayon, and Md Jahidul Haque. "Surface Acoustic Wave Sensors." In Handbook of Nanosensors, 1–31. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-16338-8_70-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Caliendo, C., E. Verona, and A. D’Amico. "Surface Acoustic Wave (SAW) Gas Sensors." In Gas Sensors, 281–306. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2737-0_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Nieuwenhuizen, M. S., and A. J. Nederlof. "Silicon Based Surface Acoustic Wave Gas Sensors." In Sensors and Sensory Systems for an Electronic Nose, 131–45. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-015-7985-8_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Nelissen, Hubertus F. M., Menno R. de Jong, Fokke Venema, Martinus C. Feiters, and Roeland J. M. Nolte. "Cyclodextrins as Receptors on Surface Acoustic Wave Devices." In Sensor Technology in the Netherlands: State of the Art, 219–22. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-5010-1_35.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Wagner, Jens, Manfred von Schickfus, and Siegfried Hunklinger. "Highly sensitive vapor sensor using an inductively coupled surface acoustic wave sensor." In Transducers ’01 Eurosensors XV, 1738–41. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59497-7_411.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kida, Atsuya, and Jun Kondoh. "Integration of Localized Surface Plasmon Resonance Sensor on Surface Acoustic Wave Device." In Recent Advances in Technology Research and Education, 177–84. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-54450-7_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Millicovsky, Martín J., Luis P. Schierloh, Pablo A. Kler, Gabriel G. Muñoz, Juan I. Cerrudo, Albano Peñalva, Juan M. Reta, Matías Machtey, and Martín A. Zalazar. "Love Type Surface Acoustic Wave Sensor: System for Biosensing Applications." In IFMBE Proceedings, 172–79. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-61960-1_17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

McGill, R. Andrew, J. W. Grate, and Mark R. Anderson. "Surface and Interfacial Properties of Surface Acoustic Wave Gas Sensors." In Interfacial Design and Chemical Sensing, 280–94. Washington, DC: American Chemical Society, 1994. http://dx.doi.org/10.1021/bk-1994-0561.ch024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Surface acoustic wave sensor"

1

Cheng, Kai, Guangyao Pei, Yunzhe Liu, Jianing Zhang, Chuqiao Wang, Xingxu Zhang, Binghe Ma, and Jian Luo. "High Quality Factor Surface Acoustic Wave Temperature Sensor with Impedance Adjustment." In 2024 IEEE SENSORS, 1–4. IEEE, 2024. https://doi.org/10.1109/sensors60989.2024.10784999.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ahmad, N. "Surface Acoustic Wave Flow Sensor." In IEEE 1985 Ultrasonics Symposium. IEEE, 1985. http://dx.doi.org/10.1109/ultsym.1985.198556.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Wang, Yizhong, Zheng Li, Lifeng Qin, Minking K. Chyu, and Qing-Ming Wang. "Surface acoustic wave flow sensor." In 2011 Joint Conference of the IEEE International Frequency Control and the European Frequency and Time Forum (FCS). IEEE, 2011. http://dx.doi.org/10.1109/fcs.2011.5977735.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ju, J., Y. Yamagata, T. Higuchi, K. Inoue, and H. Ohmori. "High Frequency Surface Acoustic Wave Atomizer." In TRANSDUCERS '07 & Eurosensors XXI. 2007 14th International Conference on Solid-State Sensors, Actuators and Microsystems. IEEE, 2007. http://dx.doi.org/10.1109/sensor.2007.4300371.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Greve, David W., Jagannath Devkota, Paul Ohodnicki, and Ruishu Wright. "Surface Acoustic Wave Sensor Interrogation Using Goubau Waves." In 2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI). IEEE, 2023. http://dx.doi.org/10.1109/usnc-ursi52151.2023.10237417.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Nomura, T., K. Nishida, A. Saitoh, and T. Mochiizuki. "Methanol sensor using a surface acoustic wave." In 2008 IEEE International Frequency Control Symposium. IEEE, 2008. http://dx.doi.org/10.1109/freq.2008.4623054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Hollinger, Richard D., Anikumar R. Tellakula, C. T. Li, Vasundara V. Varadan, and Vijay K. Varadan. "Wireless surface-acoustic-wave-based humidity sensor." In Symposium on Micromachining and Microfabrication, edited by Patrick J. French and Eric Peeters. SPIE, 1999. http://dx.doi.org/10.1117/12.360509.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Soleimanpour, Farzaneh, Sara Darbari, Behdad Barahimi, and Mohammad Kazem Moravvej-Farshi. "ZnO-Based Surface Acoustic Wave Droplet Sensor." In 2023 5th Iranian International Conference on Microelectronics (IICM). IEEE, 2023. http://dx.doi.org/10.1109/iicm60532.2023.10443163.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

White, R. M. "Surface Acoustic Wave Sensors." In IEEE 1985 Ultrasonics Symposium. IEEE, 1985. http://dx.doi.org/10.1109/ultsym.1985.198558.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Benetti, M., D. Cannata, F. Di Pietrantonio, C. Marchiori, P. Persichetti, and E. Verona. "Pressure sensor based on surface acoustic wave resonators." In 2008 IEEE Sensors. IEEE, 2008. http://dx.doi.org/10.1109/icsens.2008.4716617.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Surface acoustic wave sensor"

1

Joshua Caron. SURFACE ACOUSTIC WAVE MERCURY VAPOR SENSOR. Office of Scientific and Technical Information (OSTI), June 1998. http://dx.doi.org/10.2172/807870.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

JOSHUA CARON. SURFACE ACOUSTIC WAVE MERCURY VAPOR SENSOR. Office of Scientific and Technical Information (OSTI), September 1998. http://dx.doi.org/10.2172/7107.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Thallapally, Praveen. Surface Acoustic Wave Sensor for Refrigerant Leak Detection - CRADA 402 (Abstract). Office of Scientific and Technical Information (OSTI), February 2024. http://dx.doi.org/10.2172/2293589.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Thallapally, Praveen, Jian Liu, Huidong Li, Jun Lu, Jay Grate, Bernard McGrail, Zhiqun Deng, et al. Surface Acoustic Wave Sensors for Refrigerant Leak Detection - CRADA 402 (Final Report). Office of Scientific and Technical Information (OSTI), October 2021. http://dx.doi.org/10.2172/1959803.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

HO, CLIFFORD K., JEROME L. WRIGHT, LUCAS K. MCGRATH, ERIC R. LINDGREN, and KIM S. RAWLINSON. Field Demonstrations of Chemiresistor and Surface Acoustic Wave Microchemical Sensors at the Nevada Test Site. Office of Scientific and Technical Information (OSTI), March 2003. http://dx.doi.org/10.2172/809994.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Wang, Yizhong, Minking Chyu, and Qing-Ming Wang. Passive wireless surface acoustic wave sensors for monitoring sequestration sites CO₂ emission. Office of Scientific and Technical Information (OSTI), February 2013. http://dx.doi.org/10.2172/1164224.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Klint, B. W., P. R. Dale, and C. Stephenson. Surface acoustic wave sensors/gas chromatography; and Low quality natural gas sulfur removal and recovery CNG Claus sulfur recovery process. Office of Scientific and Technical Information (OSTI), December 1997. http://dx.doi.org/10.2172/663479.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Lei, Yu. Wireless 3D Nanorod Composite Arrays based High Temperature Surface-Acoustic-Wave Sensors for Selective Gas Detection through Machine Learning Algorithms (Final Report). Office of Scientific and Technical Information (OSTI), November 2019. http://dx.doi.org/10.2172/1579515.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Johnson, Rolland Paul, Mona Zaghluol, Andrei Afanasev, and Boqun Dong. Surface Acoustic Wave Enhancement of Photocathode Performance. Office of Scientific and Technical Information (OSTI), October 2018. http://dx.doi.org/10.2172/1476852.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

King, Michael B., and Jeffrey C. Andle. Surface Acoustic Wave Band Elimination Filter. Phase 1. Fort Belvoir, VA: Defense Technical Information Center, January 1988. http://dx.doi.org/10.21236/ada207051.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!