Relevant bibliographies by topics / Superconducting thin film

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Superconducting thin film'

Author: Grafiati
Published: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Superconducting thin film.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Superconducting thin film"

1

Golden, S. J., H. Isotalo, M. Lanham, J. Mayer, F. F. Lange, and M. Rüble. "Characterization of spray-pyrolized superconducting YBaCuO thin films on single-crystal MgO by transmission electron microscopy." Journal of Materials Research 5, no. 8 (August 1990): 1605–11. http://dx.doi.org/10.1557/jmr.1990.1605.

Full text
Abstract:
Superconducting YBaCuO thin films have been fabricated on single-crystal MgO by the spray-pyrolysis of nitrate precursors. The effects on the superconductive behavior of processing parameters such as time and temperature of heat treatment and film thickness were investigated. The superconductive behavior was found to be strongly dependent on film thickness. Films of thickness 1 μm were found to have a Tc of 67 K while thinner films showed appreciably degraded properties. Transmission electron microscopy studies have shown that the heat treatments necessary for the formation of the superconductive phase (for example, 950 °C for 30 min) also cause a substantial degree of film-substrate interdiffusion. Diffusion distances for Cu in the MgO substrate and Mg in the film were found to be sufficient to explain the degradation of the superconductive behavior in films of thickness 0.5 μm and 0.2 μm. From the concentration profiles obtained by EDS analysis diffusion coefficients at 950 °C for Mg into the YBaCuO thin film and for Cu into the MgO substrate were evaluated as 3 × 10−19 m2/s and 1 × 10−17 m2/s, respectively.
APA, Harvard, Vancouver, ISO, and other styles
2

SERGEEV, A. V., and M. YU. REIZER. "PHOTORESPONSE MECHANISMS OF THIN SUPERCONDUCTING FILMS AND SUPERCONDUCTING DETECTORS." International Journal of Modern Physics B 10, no. 06 (March 15, 1996): 635–67. http://dx.doi.org/10.1142/s021797929600026x.

Full text
Abstract:
The photoresponse of ordinary and high-T c superconductors depends critically on the hierarchy of relaxation times, such as the electron–phonon and phonon–electron scattering times, the time of phonon escape from a superconducting film and also the phonon return time. For thin films of cuprates, close to the superconducting transition the following components of transient response are identified. The picosecond photoresponse is attributed to the dynamics of nonequilibrium quasiparticles and Cooper pairs. The nanosecond response is described by the thermal boundary resistance (the Kapitza resistance) between a superconducting film and a substrate. The microsecond response is associated with the phonon diffusion in the substrate. Using experimental results, we deduce the characteristic time of electron–phonon relaxation and parameters of the film-substrate interface. The kinetic inductance photoresponse of superconductors with s- and d-wave pairing far below the superconducting transition is also calculated. We study parameters (responsivity, operating speed and noise equivalent power) of a nonequilibrium detector, in which only electron states are changed under the radiation, while the film phonons stay in thermodynamic equilibrium with the substrate. Our analysis demonstrates that the nonequilibrium superconducting detectors have essential advantages compared to superconducting bolometers and other detectors.
APA, Harvard, Vancouver, ISO, and other styles
3

Gupta, Vaibhav, John A. Sellers, Charles D. Ellis, Bhargav Yelamanchili, Simin Zou, Yang Cao, David B. Tuckerman, and Michael C. Hamilton. "Minimizing Film Stress and Degradation in Thin-Film Niobium Superconducting Cables." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2017, DPC (January 1, 2017): 1–25. http://dx.doi.org/10.4071/2017dpc-tha3_presentation4.

Full text
Abstract:
The future of superconducting and cryogenic electronic systems can significantly benefit from densely integrated superconducting multi-layer and multi-signal flexible cables due to the massive number of electrical interconnects needed in systems such as superconducting quantum computers and cryogenic detector arrays. In order to maintain superconductivity in niobium (Nb) thin films, film stress and degradation must be minimized. We are working towards configurations with embedded traces, where it is expected that the superconductor material will be subjected to subsequent fabrication steps that must not degrade the properties of the superconductor. We previously observed degradation of the superconducting properties of Nb, such as reduction of both transition temperature and critical current, as a result of curing a polyimide passivation layer at supplier recommended curing temperature (350 oC). The deterioration in the superconducting properties may be due to mechanical stress in the film or diffusion of impurities into the Nb during the curing process Film stress plays a vital role in the superconducting properties of Nb. Previous research by other groups has focused on in situ ion bombardment, substrate fixturing and wafer preparation in order to minimize film stress. In this work, we discuss the role of argon (Ar) pressure and power during Nb sputtering on the quality of Nb and Nb/Al thin films. By varying the Ar pressure and applied power during sputter deposition, we have produced both tensile and compressive films on flexible substrates in order to find the pressure that yields a near zero stress Nb and Nb/Al thin film at room temperature. A low stress Nb film was tested with a thin Al barrier layer (of the order of 10's of nm) between Nb and polyimide to protect the Nb superconductivity during the PI curing step. Nb traces with a thickness of roughly 250nm and a width of 50um were used for this work. Nb films deposited at different Ar pressures and power levels were tested for critical transition temperature (Tc), critical current (Ic), and sheet resistance (Ω/□), to compare the superconducting behavior of different Nb films. Details of the fabrication processes, experimental procedures and performance results will be presented. This work will help determine materials stacks-ups that may be useful for future multi-layer Nb-based flexible superconducting cables. Acknowledgment: We gratefully acknowledge financial support and technical guidance from Microsoft Research for this work.
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Z. M., B. I. Choi, T. A. Le, M. I. Flik, M. P. Siegal, and J. M. Phillips. "Infrared Refractive Index of Thin YBa2Cu307 Superconducting Films." Journal of Heat Transfer 114, no. 3 (August 1, 1992): 644–52. http://dx.doi.org/10.1115/1.2911329.

Full text
Abstract:
This work investigates whether thin-film optics with a constant refractive index can be applied to high-Tc superconducting thin films. The reflectance and transmittance of YBa2Cu3O7 films on LaAlO3 substrates are measured using a Fourier-transform infrared spectrometer at wavelengths from 1 to 100 μm at room temperature. The reflectance of these superconducting films at 10 K in the wavelength region from 2.5 to 25 μm is measured using a cryogenic reflectance accessory. The film thickness varies from 10 to 200 nm. By modeling the frequency-dependent complex conductivity in the normal and superconducting states and applying electromagnetic-wave theory, the complex refractive index of YBa2Cu3O7 films is obtained with a fitting technique. It is found that a thickness-independent refractive index can be applied even to a 25 nm film, and average values of the spectral refractive index for film thicknesses between 25 and 200 nm are recommended for engineering applications.
APA, Harvard, Vancouver, ISO, and other styles
5

Lee, Hyoung-Taek, Gang-Seon Ji, Jun-Yung Oh, Choong-Won Seo, Byeong-Won Kang, Kyung-Wan Kim, and Hyeong-Ryeol Park. "Measuring Complex Refractive Indices of a Nanometer-Thick Superconducting Film Using Terahertz Time-Domain Spectroscopy with a 10 Femtoseconds Pulse Laser." Crystals 11, no. 6 (June 8, 2021): 651. http://dx.doi.org/10.3390/cryst11060651.

Full text
Abstract:
Superconducting thin films are widely applied in various fields, including switching devices, because of their phase transition behaviors in relation to temperature changes. Therefore, it is important to quantitatively determine the optical constant of a superconducting material in the thin-film state. We performed a terahertz time-domain spectroscopy, based on a 10 femtoseconds pulse laser, to measure the optical constant of a superconducting GdBa2Cu3O7−x (GdBCO) thin film in the terahertz region. We then estimated the terahertz refractive indices of the 70 nm-thick GdBCO film using a numerical extraction process, even though the film thickness was approximately 1/10,000 times smaller than the terahertz wavelength range of 200 μm to 1 mm. The resulting refractive indices of the GdBCO thin film were consistent with the theoretical results using the two-fluid model. Our work will help to further understand the terahertz optical properties of superconducting thin films with thicknesses under 100 nm, as well as provide a standard platform for characterizing the optical properties of thin films without the need of Kramers–Kronig transformation at the terahertz frequencies.
APA, Harvard, Vancouver, ISO, and other styles
6

Claassen, John H., Michael Steven Osofsky, Devendra Kumar Namburi, and Philippe Vanderbemden. "Thin-Film Superconducting Shields." IEEE Transactions on Applied Superconductivity 25, no. 3 (June 2015): 1–4. http://dx.doi.org/10.1109/tasc.2014.2360134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kotlyarchuk, B. K., D. M. Popovich, A. A. Flis, and V. S. Flis. "Superconducting thin-film structures." Soviet Powder Metallurgy and Metal Ceramics 29, no. 11 (November 1990): 921–23. http://dx.doi.org/10.1007/bf00794029.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Volkov, Serhii, Maros Gregor, Tomas Roch, Leonid Satrapinskyy, Branislav Grančič, Tomas Fiantok, and Andrej Plecenik. "Superconducting properties of very high quality NbN thin films grown by pulsed laser deposition." Journal of Electrical Engineering 70, no. 7 (December 1, 2019): 89–94. http://dx.doi.org/10.2478/jee-2019-0047.

Full text
Abstract:
Abstract In this work, we study the effect of the various substrates on the growth and superconducting properties of NbN thin films grown by using pulsed laser ablation in a N2 + 1%H2 atmosphere on MgO, Al2O3 and Si substrates. Structural and superconducting analyses of the films demonstrate that using MgO and Al2O3 substrates can significantly improve the film properties compared to Si substrate. The X-ray diffraction data indicate that MgO and Al2O3 substrates produce highly oriented superconducting NbN films with large coherent domain size in the out-of plane direction on the order of layer thickness and with a superconducting transition temperature of 13.1 K and 15.2 K, respectively. On the other hand, the NbN film grown on the Si substrate exhibits random polycrystalline orientation. Together with the smallest coherent domain size it leads to the lower critical temperature of 8.3 K. Finally, by using a passivation surface layer we are able to improve superconducting properties of NbN thin film and we observe superconducting transition temperature 16.6 K, the one of the highest value reported so far for 50 nm thick NbN film on sapphire.
APA, Harvard, Vancouver, ISO, and other styles
9

Laibowitz, Robert B. "High Tc Superconducting Thin Films." MRS Bulletin 14, no. 1 (January 1989): 58–62. http://dx.doi.org/10.1557/s0883769400053926.

Full text
Abstract:
While high Tc superconductivity was first discovered in bulk material, it was apparent that thin films of these materials, particularly the compound YBa2Cu3O7-δ, would be of great interest to both science and technology. In this sense the development of these materials parallels a similar history in the low Tc materials. Initially, most of the low Tc materials of interest were single element metals such as Nb, Pb and Al in bulk form. Later work, mostly in magnets, led to the development of compounds or alloys of such metals as Nb-Sn, Nb-Ti, and many others. However, many physical and technological investigations required thin films with thicknesses in the range of 0.1-10μm. Microwave, infrared, and critical current studies are examples of some of the scientific uses of thin films. A few examples of the applications would include josephson junction-based digital computer circuits, SQUID (Superconducting Quantum Interference Devices), transmission lines, and interconnects and rf mixers. These studies are also of great interest in the high Tc materials. It is readily apparent that scientific and technological developments in superconductivity are closely interwoven.The high level of interest in thin films can be appreciated by observing that it was barely a few months after the announcement of superconductivity above 77 K that the first films of these complex, multi-element materials, superconducting at about 86 K were announced. These early efforts at thin film fabrication were generally accomplished using multi-element deposition techniques but subsequent development has seen many varieties of film fabrication techniques used quite successfully to fabricate high-quality films.
APA, Harvard, Vancouver, ISO, and other styles
10

V. Zakharov, Aleksandr, Aleksandr B. Muravjev, Irina S. Pozygun, Gennadiy M. Seropyan, Sergey A. Sychev, and Ekaterina A. Yashkevich. "Superconducting Yttrium Barium Copper Oxide Thin Films Growing on the Strained Substrates." Siberian Journal of Physics 3, no. 4 (December 1, 2008): 25–32. http://dx.doi.org/10.54362/1818-7919-2008-3-4-25-32.

Full text
Abstract:
The article is devoted to formation of superconducting thin films on the single-crystal substrate where areas with different values of the critical current density are, that is needed for fabrication of superconducting devices. The method is based on an establishment of elastic mechanical stresses on the substrate crystal under the nanosecond focused pulsed laser irradiation. On the irradiated substrate the superconducting thin film having auxiliary elastic stresses not till the area is over the irradiated section of the substrate is grown. At the same time the critical film current density is suppressed for required values are used to fabricate Josephson junctions. Observations for a long time demonstrate superconducting transport film properties are not varied significantly during the maintenance.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Superconducting thin film"

1

McCaughan, Adam Nykoruk. "Superconducting thin film nanoelectronics." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/101576.

Full text
Abstract:
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2015.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 163-171).
Superconducting devices have found application in a diverse set of fields due to their unique properties which cannot be reproduced in normal materials. Although many of these devices rely on the properties of bulk superconductors, superconducting devices based on thin films are finding increasing application, especially in the realms of sensing and amplification. With recent advances in electron-beam lithography, superconducting thin films can be patterned into geometries with feature sizes at or below the characteristic length scales of the superconducting state. By patterning 2D geometries with features smaller than these characteristic length scales, we were able to use nanoscale phenomena which occur in thin superconducting films to create superconducting devices which performed useful tasks such as sensor amplification, logical processing, and fluxoid state sensing. In this thesis, I describe the development, characterization, and application of three novel superconducting nanoelectronic devices: the nTron, the yTron, and the current-controlled nanoSQUID. These devices derive their functionality from the exploitation of nanoscale superconducting effects such as kinetic inductance, electrothermal suppression, and current-crowding. Patterning these devices from superconducting thin-films has allowed them to be integrated monolithically with each other and other thin-film superconducting devices such as the superconducting nanowire single-photon detector.
by Adam Nykoruk McCaughan.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
2

Banerjee, Archan. "Optimisation of superconducting thin film growth for next generation superconducting detector applications." Thesis, University of Glasgow, 2017. http://theses.gla.ac.uk/8573/.

Full text
Abstract:
There is a growing demand for superconducting detectors with single photon sensitivity from near- to far infrared wavelengths. Emerging application areas include imaging, remote sensing, astronomy and free space communications. Two superconducting device technologies, superconducting nanowire single-photon detectors (SSPDs/SNSPDs) and microwave kinetic inductance detectors (MKIDs) have the potential to outperform off-the-self semiconductor technologies and offer scalability to large arrays. Fabrication of high efficiency superconducting detectors strongly depends on the quality of superconducting thin films. The original work presented in this thesis has explored the growth and optimization of several superconducting thin film materials for next generation superconducting detectors. Films have been grown in an ultra-high vacuum sputter deposition system and an atomic layer deposition system. Since its initial demonstration, NbN and NbTiN have been predominantly used as the base material for SNSPDs. In this work, we have explored the optimization of both the materials with an emphasis on NbTiN. NbTiN is optimized by heating the substrates to 800 ̊C achieving a Tc of 10.4 K for a film thickness of 5.5 nm on silicon substrate. Due to their crystalline nature superconducting properties of NbN or NbTiN thin films are strongly correlated with the lattice parameters of substrate properties. This causes a restriction on the substrate choice and integration of SNSPD devices with complex circuits. Amorphous superconducting materials can be promising alternatives for this purpose. We have explored growth and optimization of amorphous MoSi and MoGe thin films. Both the materials are co-sputtered to tune the composition. For 5 nm thick MoSi film on silicon substrate we obtain Tc of 5.5 K. For MKID fabrication, TiN can be an useful base material due to its high sheet resistance and widely tuneable superconducting properties. TiN thin films have been sputtered on heated (500 ̊C) silicon substrates with a Tc of 3.9 K for a 90 nm thick film. The dielectric constants of the thin films as a function of wavelength (270-2200 nm) have been determined via variable angle spectroscopic ellipsometry (VASE). Atomic structure and stoichiometry of the films have been characterized in high resolution transmission electron microscopy (HRTEM). This study enables us to precisely control film properties and thus tailor superconducting films to the requirements of specific photon-counting applications.
APA, Harvard, Vancouver, ISO, and other styles
3

Beringer, Douglas. "Thin Film Approaches to The Srf Cavity Problem: Fabrication and Characterization of Superconducting Thin Films." W&M ScholarWorks, 2016. https://scholarworks.wm.edu/etd/1499449840.

Full text
Abstract:
Superconducting Radio Frequency (SRF) cavities are responsible for the acceleration of charged particles to relativistic velocities in most modern linear accelerators, such as those employed at high-energy research facilities like Thomas Jefferson National Laboratory’s CEBAF and the LHC at CERN. Recognizing SRF as primarily a surface phenomenon enables the possibility of applying thin films to the interior surface of SRF cavities, opening a formidable tool chest of opportunities by combining and designing materials that offer greater benefit. Thus, while improvements in radio frequency cavity design and refinements in cavity processing techniques have improved accelerator performance and efficiency – 1.5 GHz bulk niobium SRF cavities have achieved accelerating gradients in excess of 35 MV/m – there exist fundamental material bounds in bulk superconductors limiting the maximally sustained accelerating field gradient (approximately 45 MV/m for Niobium) where inevitable thermodynamic breakdown occurs. With state of the art niobium based cavity design fast approaching these theoretical limits, novel material innovations must be sought in order to realize next generation SRF cavities. One proposed method to improve SRF performance is to utilize thin film superconducting-insulating-superconducting (SIS) multilayer structures to effectively magnetically screen a bulk superconducting layer such that it can operate at higher field gradients before suffering critically detrimental SRF losses. This dissertation focuses on the production and characterization of thin film superconductors for such SIS layers for radio-frequency applications.
APA, Harvard, Vancouver, ISO, and other styles
4

Farrar, Simon Richard. "Excimer laser ablation characterisation for superconducting thin film applications." Thesis, University of Hull, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.282366.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yoshida, Yutaka, Yusuke Ichino, Masashi Miura, Yoshiaki Takai, Kaname Matsumoto, and Ataru Ichinose. "High critical current density in high field in Sm/sub 1+x/Ba/sub 2-x/Cu/sub 3/O/sub 6+y/ thin films." IEEE, 2005. http://hdl.handle.net/2237/6776.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yoshida, Yutaka, Kimihiko Sudoh, Yusuke Ichino, Izumi Hirabayashi, Yoshiaki Takai, 隆. 吉田, and 祐亮 一野. "Growth mechanism and surface morphologies of Sm/sub 1+x/Ba/sub 2-x/Cu/sub 3/O/sub 6+y/ thin films." IEEE, 2003. http://hdl.handle.net/2237/6746.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Elfassy, Laurent Albert Isaac. "Josephson junctions in high temperature superconducting patterned thin film resonators." Thesis, University of Cambridge, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.624725.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kumar, Dinesh. "Critical current and Lorentz force effects in superconducting thin films." Thesis, University of Cambridge, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.337985.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Richardson, Kurt Antony. "The manufacture of high temperature superconducting tapes and films." Thesis, University of Southampton, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.242413.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Guruswamy, Tejas. "Nonequilibrium behaviour and quasiparticle heating in thin film superconducting microwave resonators." Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/277214.

Full text
Abstract:
In this thesis I describe work on developing theoretical and numerical models of supercon- ducting thin-film microwave resonators. Superconducting resonators are used in a variety of applications, one of which is as kinetic inductance detectors (KIDs). KIDs are ultra-low noise, highly sensitive, multiplexable detectors, with uses in a wide variety of fields including astrophysics, medical imaging, and particle physics. Resonators are also crucial for supercon- ducting qubit readout, superconducting mixers and parametric amplifiers, and as multiplexers for other devices. The results described in this thesis apply to all thin film resonators, but are primarily described in the context of KIDs. I develop models of how constant absorbed power affects superconducting thin films, driving them out of thermal equilibrium with the bath. Using the Chang & Scalapino equations, I calculate numerically the steady-state quasiparticle and phonon distributions for various sources of power (sub-gap and above-gap photons and phonons, single frequency and broadband). Many new results emerge, a few of which are: the quasiparticle heating effects of microwave power, explaining the experimentally measured saturation of resonator performance; the frequency dependence of the quasiparticle generation efficiency in the sub-mm wavelength range; and the importance of phonon trapping in thin films at low temperatures. I then use these nonequilibrium results in higher-level device models. Starting from a generic framework for resonators, I present and implement a model of a KID with variable thermal isolation. I calculate the effects of quasiparticle heating on both the large-signal and small-signal behaviour, highlighting the effects of electrothermal feedback caused by readout power. Electrothermal feedback is shown to be able to increase or decrease the magnitude and bandwidth of the responsivity and noise, depending on the operating point. Finally, I propose an experimental measurement of quasiparticle heating effects in a new device – a four-port ring resonator. In such a device, unlike in the standard two-port resonator, the device can be heated and read out independently. I develop detailed models for the thermal and electrical behaviour of these devices, and suggest a scheme by which the quasiparticle heating effects of microwave power, predicted in this thesis, can be measured.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Superconducting thin film"

1

H, Burness Arnold, ed. Superconducting thin films: New research. New York: Nova Science Publishers, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

R, Broussard Phillip, ed. Superconducting film devices. San Diego: Academic Press, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Proch, D. Transparencies from the Workshop on Thin Film Coating Methods for Superconducting Accelerating Cavities. Hamburg: Deutsches Elektronen-Synchrotron DESY, MHF-SL Group, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Roger, Stockbauer, Krishnaswamy S. V, Kurtz Richard L, and American Vacuum Society, eds. High TC superconducting thin films: Processing, characterization, and applications, Boston, MA 1989. New York: American Institute of Physics, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

1946-, Margaritondo Giorgio, Joynt Robert, Onellion Marshall, American Vacuum Society, and Topical Conference on High TC Superconducting Thin Films, Devices, and Applications (1988 : Atlanta, Ga.), eds. High Tc̳ superconducting thin films, devices, and applications, Atlanta, GA, 1988. New York, NY: American Institute of Physics, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

International, Symposium on Weak Superconductivity (7th 1994 Bratislava Slovak Republic). Proceedings of the Seventh International Symposium on Weak Superconductivity, June 6-10, 1994, Smolenice Castle, Slovak Republic. Bratislava, Slovak Republic: Dept. of Cryoelectronics, Institute of Electrical Engineering, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Š, Beňačka, Darula M, and Kedro M, eds. Proceedings of the Sixth International Symposium on Weak Superconductivity, Smolenice, Czechoslovakia, 20-24 May 1991. Singapore: World Scientific, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Haindl, Silvia. Iron-Based Superconducting Thin Films. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75132-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

High-temperature superconducting thin films at microwave frequencies. Berlin: Springer, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

L, Shindé Subhash, and Rudman David Albert, eds. Interfaces in high-Tc superconducting systems. New York: Springer-Verlag, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Superconducting thin film"

1

Braginski, A. I. "Thin Film Structures." In The New Superconducting Electronics, 89–122. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1918-4_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bartolf, Holger. "Superconducting Thin-Film Preparation." In Fluctuation Mechanisms in Superconductors, 27–36. Wiesbaden: Springer Fachmedien Wiesbaden, 2015. http://dx.doi.org/10.1007/978-3-658-12246-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Haindl, Silvia. "The Film/Substrate Interface." In Iron-Based Superconducting Thin Films, 189–233. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75132-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Haindl, Silvia. "Thin Film Studies Under Focus." In Iron-Based Superconducting Thin Films, 253–379. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75132-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Haindl, Silvia. "Thin Film Growth of Fe-Based Superconductors." In Iron-Based Superconducting Thin Films, 27–148. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75132-6_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wasa, Kiyotaka, Hideaki Adachi, Yo Ichikawa, Kumiko Hirochi, and Kentaro Setsune. "Superconducting Phase Control for Rare-Earth-Free High-Tc Superconducting Thin Films." In Science and Technology of Thin Film Superconductors, 147–56. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4684-5658-5_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cantoni, C., and A. Goyal. "High-T c Superconducting Thin- and Thick-Film–Based Coated Conductors for Energy Applications." In Thin Film Metal-Oxides, 233–53. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-1-4419-0664-9_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Strom, U., J. C. Culbertson, and S. A. Wolf. "Photoresistive Response of Superconducting Thin Films." In Science and Technology of Thin Film Superconductors 2, 449–58. Boston, MA: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4684-1345-8_65.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Heiden, C. "High Temperature Superconducting Thin Film-Based Devices." In Multicomponent and Multilayered Thin Films for Advanced Microtechnologies: Techniques, Fundamentals and Devices, 567–99. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1727-2_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Talvacchio, J., M. G. Forrester, and A. I. Braginski. "Photodetection with High-Tc Superconducting Films." In Science and Technology of Thin Film Superconductors, 449–58. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4684-5658-5_53.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Superconducting thin film"

1

Jenkins, A. P. "TBCCO-thin film microwave devices." In IEE Colloquium on Superconducting Microwave Circuits. IEE, 1996. http://dx.doi.org/10.1049/ic:19960595.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kreider, Kenneth G., James P. Cline, Alexander Shapiro, J. L. Pena, A. Rojas, J. A. Azamar, L. Maldonado, and L. Del Castillo. "Sputtered thin film YBa2Cu3On." In Topical conference on high tc superconducting thin films, devices, and applications. AIP, 1989. http://dx.doi.org/10.1063/1.37937.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Hong-Cheng. "Fabrication and properties of high-temperature superconducting thin films." In Thin Film Physics and Applications: Second International Conference, edited by Shixun Zhou, Yongling Wang, Yi-Xin Chen, and Shuzheng Mao. SPIE, 1994. http://dx.doi.org/10.1117/12.190813.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

HASCICEK, Y. S., Y. EYSSA, S. W. VAN SCIVER, and H. J. SCHNEIDER-MUNTAU. "HIGH TEMPERATURE SUPERCONDUCTING THIN FILM MAGNETS." In Proceedings of the VIIIth International Conference on Megagauss Magnetic Field Generation and Related Topics. WORLD SCIENTIFIC, 2004. http://dx.doi.org/10.1142/9789812702517_0036.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ferguson, A. J., N. A. Court, F. E. Hudson, and R. G. Clark. "Thin-film aluminium for superconducting qubits." In 2006 International Conference on Nanoscience and Nanotechnology. IEEE, 2006. http://dx.doi.org/10.1109/iconn.2006.340682.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Bing, Shiqi Liu, Yu Wang, Yingkun Huang, and Pengju Gu. "Broadband Thin-Film Microstrip Superconducting Antenna." In 2018 Asia-Pacific Microwave Conference (APMC). IEEE, 2018. http://dx.doi.org/10.23919/apmc.2018.8617178.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Glass, N., and D. Rogovin. "Laser-induced index gratings in thin-film superconductors." In OSA Annual Meeting. Washington, D.C.: Optica Publishing Group, 1991. http://dx.doi.org/10.1364/oam.1991.my8.

Full text
Abstract:
Optical index gratings are radiation-induced periodic spatial variations in an active medium’s dielectric constant. These structures are responsible for numerous active optical processes and are of central interest to nonlinear optics. In this paper these concepts are extended to superconducting thin films. Notably, theory asserts that optical index gratings can be created in thin film superconducting structures from coherently interfering laser beams. The presence of the optical interference pattern gives rise to pair-splitting processes that generate quasiparticle (qp) population gratings. In turn, these qp gratings establish conductivity gratings within the thin-film super-conductor, that are active for frequencies below the pair-splitting frequency. Since the conductivity has both real and imaginary parts, both phase and amplitude gratings are established in the superconducting thin film. We examine the steady-state and transient dynamics of these index gratings and show that they form quite rapidly, on the order of 0.5 ns for Nb superconducting thin films. Furthermore, it is shown that the existence of these optical index gratings can be verified by measuring the angle resolved transmittance and reflectance of millimeter waves. In particular, our theoretical analysis shows that well-defined off-specular peaks, corresponding to the grating diffraction orders, appear.
APA, Harvard, Vancouver, ISO, and other styles
8

Guo, S. P., J. M. Zhang, Qin X. Xie, and Shixin Yuan. "Influence of etching solution for high-T c superconducting thin film." In Thin Film Physics and Applications: Second International Conference, edited by Shixun Zhou, Yongling Wang, Yi-Xin Chen, and Shuzheng Mao. SPIE, 1994. http://dx.doi.org/10.1117/12.190811.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kang, Lin, and Ping Wu. "Influence of etching solution for high-T c superconducting thin film." In Thin Film Physics and Applications: Second International Conference, edited by Shixun Zhou, Yongling Wang, Yi-Xin Chen, and Shuzheng Mao. SPIE, 1994. http://dx.doi.org/10.1117/12.190815.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, Yongqian, John F. Whitaker, and Christine E. Platt. "Terahertz Spectroscopy of Superconducting Thin Film Ba0.6K0.4BiO3." In Ultrafast Electronics and Optoelectronics. Washington, D.C.: OSA, 1993. http://dx.doi.org/10.1364/ueo.1993.j4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Superconducting thin film"

1

Hoffmann, Roald, and M. J. Sienko. Thin Film Synthesis of Superconducting Chemical Compounds. Fort Belvoir, VA: Defense Technical Information Center, November 1985. http://dx.doi.org/10.21236/ada162807.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ichkitidze, Levan. THIN FILM FLAT SUPERCONDUCTING MAGNETIC FIELD CONCENTRATOR. Peeref, June 2023. http://dx.doi.org/10.54985/peeref.2306p7068948.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wu, X. D., A. Finokoglu, M. Hawley, Q. Jia, T. Mitchell, F. Mueller, D. Reagor, and J. Tesmer. High-temperature superconducting thin-film-based electronic devices. Office of Scientific and Technical Information (OSTI), September 1996. http://dx.doi.org/10.2172/378956.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Beringer, Douglas. Thin Film Approaches to the SRF Cavity Problem Fabrication and Characterization of Superconducting Thin Films. Office of Scientific and Technical Information (OSTI), August 2017. http://dx.doi.org/10.2172/1422714.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gaballe, T. H. Superconducting Thin Films, Composites and Superconducting Junctions. Fort Belvoir, VA: Defense Technical Information Center, November 1985. http://dx.doi.org/10.21236/ada223576.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Geballe, T. H. Superconducting Thin Films Composites and Junctions. Fort Belvoir, VA: Defense Technical Information Center, October 1988. http://dx.doi.org/10.21236/ada204556.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Geballe, T. H. Superconducting Thin Films, Composites and Junctions. Fort Belvoir, VA: Defense Technical Information Center, August 1985. http://dx.doi.org/10.21236/ada216688.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Geballe, T. H. Superconducting Thin Films, Composites and Functions. Fort Belvoir, VA: Defense Technical Information Center, August 1985. http://dx.doi.org/10.21236/ada224380.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Burton, Matthew. Superconducting Thin Films for The Enhancement of Superconducting Radio Frequency Accelerator Cavities. Office of Scientific and Technical Information (OSTI), July 2017. http://dx.doi.org/10.2172/1498914.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Weaver, John H. High Temperature Superconducting Materials: Thin Films, Surfaces, and Interfaces. Fort Belvoir, VA: Defense Technical Information Center, June 1991. http://dx.doi.org/10.21236/ada237359.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Superconducting thin film' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography