Academic literature on the topic 'SU8'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'SU8.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "SU8"
Jiguet, S., A. Bertsch, H. Hofmann, and P. Renaud. "SU8-Silver Photosensitive Nanocomposite." Advanced Engineering Materials 6, no. 9 (September 2004): 719–24. http://dx.doi.org/10.1002/adem.200400068.
Full textMulligan, Riley P. M., Carolyn H. Eyles, and Andy F. Bajc. "Stratigraphic analysis of Late Wisconsin and Holocene glaciolacustrine deposits exposed along the Nottawasaga River, southern Ontario, Canada." Canadian Journal of Earth Sciences 55, no. 7 (July 2018): 863–85. http://dx.doi.org/10.1139/cjes-2017-0081.
Full textRahiminejad, Sofia, Elena Pucci, Sjoerd Haasl, and Peter Enoksson. "SU8 ridge-gap waveguide resonator." International Journal of Microwave and Wireless Technologies 6, no. 5 (May 12, 2014): 459–65. http://dx.doi.org/10.1017/s1759078714000609.
Full textRansley, J. H. T., M. Watari, D. Sukumaran, R. A. McKendry, and A. A. Seshia. "SU8 bio-chemical sensor microarrays." Microelectronic Engineering 83, no. 4-9 (April 2006): 1621–25. http://dx.doi.org/10.1016/j.mee.2006.01.175.
Full textJiguet, S., A. Bertsch, H. Hofmann, and P. Renaud. "Conductive SU8 Photoresist for Microfabrication." Advanced Functional Materials 15, no. 9 (September 2005): 1511–16. http://dx.doi.org/10.1002/adfm.200400575.
Full textRong, Hua, Jian Wei, and Xi Chen. "Study on Fabrication Process of SU8 Photoresist Microstructures and Evaluation of Stress Gradient." Key Engineering Materials 609-610 (April 2014): 740–44. http://dx.doi.org/10.4028/www.scientific.net/kem.609-610.740.
Full textArana, N., D. Puente, I. Ayerdi, E. Castaño, and J. Berganzo. "SU8 protective layers in liquid operating SAWs." Sensors and Actuators B: Chemical 118, no. 1-2 (October 2006): 374–79. http://dx.doi.org/10.1016/j.snb.2006.04.083.
Full textHuang, Cheng-Sheng, and Wei-Chih Wang. "SU8 inverted-rib waveguide Bragg grating filter." Applied Optics 52, no. 22 (July 31, 2013): 5545. http://dx.doi.org/10.1364/ao.52.005545.
Full textKumar, Vijay, and Niti Nipun Sharma. "Synthesis of hydrophilic to superhydrophobic SU8 surfaces." Journal of Applied Polymer Science 132, no. 18 (January 21, 2015): n/a. http://dx.doi.org/10.1002/app.41934.
Full textHong, G., A. S. Holmes, and M. E. Heaton. "SU8 resist plasma etching and its optimisation." Microsystem Technologies 10, no. 5 (August 2004): 357–59. http://dx.doi.org/10.1007/s00542-004-0413-4.
Full textDissertations / Theses on the topic "SU8"
Fulcrand, Rémy. "Etude et développement d'une plateforme microfluidique dédiée à des applications biologiques : intégration d'un actionneur magnétique sur substrat souple." Toulouse 3, 2009. http://thesesups.ups-tlse.fr/732/.
Full textThe profound changes observed over the last twenty five years in the electronics world currently haves courses in biology, partly thanks to biotechnology. The concept commonly called "lab-on-chip" (LOC) owes its growth to the considerable effort that has been conducted on technology development of micro-fabrication. The number of technological tools currently available for the manufacture of microfluidic networks is important but the realization of complex three-dimensional systems remains a challenge. The development of micro and nanotechnology for new materials such as polymers, and especially the SU-8, opened the way for more sophisticated integration as we present it in this work. We expose the details of an approach in the design, modeling and fabrication of magnetic actuators integrated into SU-8 microfluidic networks for magnetic beads handling; all being developed on a flexible substrate of PET. The development of characterizations tools systems was also presented. They permit the establishment of an experimental protocol to assess and quantify the different electrical, thermal, fluidic and magnetic parameters contributing to obtain a LOC device in the efficient movement of fluids, trapping of magnetic balls, transfer of one area to another and to their orientation through preferred channels
Audrain, Margaret T. "Evaluation of SU8 and ruthenium oxide materials for microfluidic devices." Diss., Rolla, Mo. : Missouri University of Science and Technology, 2008. http://scholarsmine.mst.edu/thesis/pdf/Audrain_09007dcc8054efe8.pdf.
Full textVita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed August 15, 2008) Includes bibliographical references.
Gebauer, Christian. "Optimierung und Herstellung von Dualband-Fabry-Pérot-Filtern mit neuartigen Schichtmaterialien." Master's thesis, Universitätsbibliothek Chemnitz, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-64017.
Full textThis work presents a new design type of the older well known tunable micromachined Fabry-Pérot filter (FPI4). Compared to the previous system the new design (FPI5) aimed to avoid the problems as sticking, short circuit between the shield and the electrode as well as the malfunction in dicing and separation. Furthermore an identification mark and a new separated electrode were to be improved. The conclusion of this optimization was the new Design FPI5. The whole geometry was in addition to the adhesive bonding with SU8 moreover designed for the direct bonding, which was successfully verified in the FPI design with two moveable reflector carriers. Additionally a verification of the bonding strength at different bonding parameters was done. This verification showed that a 50 % higher bonding strength could be achieved by using the new bonding parameters in comparison to the normally used bonding parameters
Yashar, David A. "A refrigerant expansion control device fabricated through nickel deposition within SU8 micromolds." College Park, Md. : University of Maryland, 2006. http://hdl.handle.net/1903/3386.
Full textThesis research directed by: Mechanical Engineering. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.
Fulcrand, Remy. "Etude et développement d'une plateforme microfluidique dédiée à des applications biologiques. Intégration d'un actionneur magnétique sur substrat souple." Phd thesis, Université Paul Sabatier - Toulouse III, 2009. http://tel.archives-ouvertes.fr/tel-00450545.
Full textAntonio, Christian, and n/a. "Characterisation and optimisation of the variable frequency microwave technique and its application to microfabrication." Swinburne University of Technology, 2006. http://adt.lib.swin.edu.au./public/adt-VSWT20070220.122922.
Full textBushueva, Olga. "Conception, réalisation et caractérisation d'inductances et de transformateurs tridimensionnels pour applications RF et microondes." Thesis, Toulouse 3, 2016. http://www.theses.fr/2016TOU30140/document.
Full textThe miniaturization, fabrication and integration of RF passive components are current major challenges, also taking into account the fabrication cost which is very important especially for consumer applications. Passive components such as inductors and transformers are subject to an ongoing development to improve their performance and reduce the area occupied. The work described in this manuscript is part of that context and target the development of a new technological process allowing the production of low-cost three-dimensional high-performance inductive components. The work presented in this paper is divided into four chapters. The first chapter describes the state of the art of integrated inductors and transformers by addressing the main topologies used fabrication technologies and applications. In the second chapter, the study and optimization of solenoid inductors and transformers is discussed after describing the origins of performance limiting losses. For this, we use the 3D electromagnetic simulation. In the third chapter, the problem concerning the characterization of inductive components with high Q factor is raised. After finding that the measurement environment artificially reduces performance, some solutions are proposed and experimentally verified. Finally, the last chapter discusses the fabrication and characterization of developed components. The best measured performance corresponds to a quality factor of 61 to 5.4 GHz for an inductance value of 2.5 nH and a maximum available gain of -0.5 dB to 0.39 dB over the range from 3.8 to 6.5 GHz for a 2:2 transformer. These results place these components among the best current achievements
Artillan, Philippe. "Design, modelization and realization of integrated inductive components for low power supplies and microsystems." Toulouse, INSA, 2008. http://eprint.insa-toulouse.fr/archive/00000243/.
Full textL’intégration complète des dispositifs de conversion d’énergie destinés à créer des circuits d’alimentation compacts se heurte encore aujourd’hui à des contraintes technologiques fortes sur l’intégration des composants passifs inductifs et capacitifs. La fréquence de fonctionnement de ces dispositifs, d’ores et déjà de l’ordre du MHz, en augmentant pourrait réduire la taille de ces composants passifs et donc permettre leur intégration. Cependant, les pertes fortement liées à la fréquence et à la technologie, freinent encore cette augmentation. Cette thèse a pour objectif l’étude systématique de structures d’inductances intégrées à travers le développement d’une modélisation accompagnée de simulations précises pour le développement d’une méthodologie de simulation valable sur la plage de fréquence de 0Hz à 1GHz. Pour cela, un modèle analytique basé sur la méthode PEEC (Partial Element Equivalent Circuit) a d’abord été développé. Ce type de modèle a du être adapté aux topologies des composants étudiés : symétrie cylindrique, conducteurs de section non négligeable, milieux non homogènes… Ce modèle décompose l’étude du composant en deux étapes : calculs électromagnétiques menés sur des sous-parties du composant (éléments partiels) et calcul de la réponse fréquentielle globale à partir de modèles électriques des éléments partiels. Un procédé complet de réalisation technologique des composants inductifs a également été mis au point en parallèle afin de valider expérimentalement la modélisation. L’amélioration de la résolution des motifs et l’augmentation de l’épaisseur des dépôts lors des étapes de croissance électrolytique du cuivre, ainsi que la planarisation des niveaux de conducteurs avec de la résine SU8 ont fait l’objet d’études spécifiques. Ces avancées ont permis la réalisation de selfs multibrin et multiniveau qui présentent des caractéristiques électriques intéressantes en haute fréquence. Enfin, la caractérisation des prototypes en basse fréquence a été rendue possible par la mise en oeuvre d’un banc de mesure d’impédance pour la gamme de fréquence de 40 Hz à 110MHz et des caractérisations en haute fréquence effectuées à l’aide d’un analyseur de réseau. Ces travaux ont été complétés par la mise au point d’une méthode analytique de calcul du champ magnétique. Les calculs permettent de prédire la répartition du champ magnétique généré par des actionneurs magnétiques planaires intégrés excités en courant continu
Lagouge, Matthieu. "Conception de microsystèmes à base d'actionneurs en SU8 pour la manipulation de micro-objets en milieu liquide et transfert vers milieu quasi-sec." Phd thesis, Université des Sciences et Technologie de Lille - Lille I, 2006. http://tel.archives-ouvertes.fr/tel-00084755.
Full textLe premier système proposé est une microsonde en silicium polycristallin et en résine SU8 dotée d'une pointe, dont la fonction est de descendre dans un microcanal et effectuer des mesures électriques sur des microobjets. Après une phase de conception, un compterendu de la fabrication et des tests sont proposés.
Cette première étape permet de poursuivre sur un système d'extraction de microobjets d'un milieu liquide vers un milieu sec. Celuici comporte un système de convoyage diélectrophorétique et un actionneur en résine SU8 et or. La conception, la fabrication, et les tests ont permis finalement de démontrer le potentiel en terme d'automatisation d'un tel microsystème.
Robin, Malo. "Développement de transistors à effet de champ organiques et de matériaux luminescents à base de nanoclusters par impression à jet d’encre." Thesis, Rennes 1, 2017. http://www.theses.fr/2017REN1S105/document.
Full textThe objective of this thesis was to demonstrate the potentialities of inkjet printing for driving an HLED containing red phosphorescent metallic clusters, with organic field effect transistors. To achieve this goal, the project was divided into two parts: I) The fabrication and optimization of n-type organic transistors by photolithography and then transfer to inkjet printing. II) Parallel to the development of transistors, I focused on designing luminescent hybrid materials for HLED realization. Concerning transistors, we obtained a better understanding of the factors influencing the charge injection but also the electrical stability for bottom gate/ bottom contact geometry transistor with evaporated C60 semiconductor. We have demonstrated that the contact resistance is on the one hand governed by the morphology of the SCO at the electrodes and on the other hand independent of the metal work function. In addition, we have observed that transistors electrical stability of is strongly impacted by the source and drain contact nature. The optimization of photolithography transistors, which essentially consisted of modifying the interfaces, allowed us to develop efficient n-type transistors with saturated field effect mobilities of up to 1.5 cm2/V.s for a maximal process temperature of 115 °C. The technological transfer to inkjet printed transistors was then performed. We then demonstrated that gate electrode and insulator morphologies deposited by inkjet printing, have a negligible impact on transistors performances. For our printed structure, charges injection at the S/D electrodes is in fact the key factor for high performance transistors realization. Finally, red phosphorescent materials based on molybdenum octahedral metal cluster have been developed. The resulting hybrid copolymer showed photoluminescence quantum yield up to 51%. The realization of the HLED was then carried out by combining a commercial blue LED and the copolymer doped with octahedral molybdenum clusters for possible applications in biology or lighting
Books on the topic "SU8"
Maraschio, Nicoletta, ed. Firenze e la lingua italiana fra nazione ed Europa. Florence: Firenze University Press, 2007. http://dx.doi.org/10.36253/978-88-6453-170-0.
Full textCristina, Freire, and Longoni Ana 1967-, eds. Conceitualismos do Sul / Sur: Conceptualismos del Sur / Sul. São Paulo, SP, Brasil: Annablume, 2009.
Find full textBianchini, Vasco. Impruneta: Le sue origini, la sua Madonna, il suo tesoro d'arte, le sue tradizioni. Impruneta (Firenze): [s.n.], 2000.
Find full textCorsani, Gabriele, Leonardo Rombai, and Mariella Zoppi, eds. Abbazie e paesaggi medievali in Toscana. Florence: Firenze University Press, 2014. http://dx.doi.org/10.36253/978-88-6655-645-9.
Full textJi zhu ji ji sui sun shang. Wuhan: Hu bei ke xue ji shu chu ban she, 2011.
Find full textLippiello, Tiziana. Discorso inaugurale della Magnifica Rettrice Anno accademico 2020/2021. Venice: Fondazione Università Ca’ Foscari, 2021. http://dx.doi.org/10.30687/978-88-6969-519-3.
Full textZhuang Sun sui bi. [Xinjiapo]: Chuang yi quan chu ban she, 2007.
Find full textKun, Sam Sui Wui. Xinjiapo Sanshui hui guan qing zhu cheng li yi bai zhou nian ji nian te kan =: Sum Sui Wui Kun 100th anniversary souvenir magazine, 1886-1986. [Singapore: Xinjiapo Sanshui hui guan te kan chu ban wei yuan hui, 1986.
Find full textConvegno nazionale su L'anima umana: sua origine, sua natura, sue facoltà, suo destino (2000 Naples, Italy). Convegno nazionale su L'anima umana: sua origine, sua natura, sue facoltà, suo destino: Napoli, 24-25 ottobre 2000. Napoli: Loffredo, 2001.
Find full textEifler, Ellen Walkiria. Bom Retiro do Sul: Sua história, sua vida. [Bom Retiro do Sul?: s.n., 1992.
Find full textBook chapters on the topic "SU8"
Stuewer, R. H., and F. Bevilacqua. "The many faces of the electron. A centennial symposium (SU8)." In AIHS, XX INTERN. CONGRESS, SYMPOSIA, 81–91. Turnhout: Brepols Publishers, 1997. http://dx.doi.org/10.1484/m.dda-eb.4.2017102.
Full textSeidemann, Volker, Sebastian Bütefisch, and Stephanus Büttgenbach. "Application and Investigation of In-Plane Compliant SU8-Structures for MEMS." In Transducers ’01 Eurosensors XV, 1588–91. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59497-7_375.
Full textEscriba, Christophe, Rémy Fulcrand, Philippe Artillan, David Jugieu, Aurélien Bancaud, Ali Boukabache, Anne-Marie Gue, and Jean-Yves Fourniols. "Trapping Biological Species in a Lab-on-Chip Microsystem: Micro Inductor Optimization Design and SU8 Process." In IFIP Advances in Information and Communication Technology, 81–96. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-12267-5_5.
Full textGilewicz-Wolter, Jolanta, Z. Żurek, J. Dudala, Jerzy Lis, Martah Homa, and Marcin Wolter. "Diffusion Rates of51Cr,54Mn and 59Fe in MnCr2O4 and FeCr2O4 Spinels." In Mass and Charge Transport in Inorganic Materials III, 27–31. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908158-02-8.27.
Full textXu, Xiao, Li Mei Cao, Dan Yu Jiang, and Qiang Li. "Preparation and Luminescent Properties of SrAl2O4:Eu2+,Dy3+." In High-Performance Ceramics V, 381–82. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.381.
Full textHe, Da Wei, Yan Ning Shi, Tao Hou, and Dan Zhou. "Luminescence Properties of M2MgSi2O7: Re (M = Ba, Sr, Ca) (Re = Eu2+, Ce3+, Tb3+)." In Key Engineering Materials, 622–24. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.622.
Full textTsidilkovski, V. I., M. Z. Uritsky, A. N. Varaskin, and A. Ya Fishman. "The Influence of Defects on Proton Diffusion in Perovskites АIIВIV11-xRIIIxO3-δ: Monte Carlo Study." In Defect and Diffusion Forum, 124–29. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908451-36-1.124.
Full textShi, Shi Kao, Jing Gao, and Ji Zhou. "Enhanced Red Emission in Lithium Doped CaWO4:Eu3+ and CaMoO4:Eu3+ Phosphor." In Materials Science Forum, 1081–84. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.1081.
Full textZhang, Jian, Shi Wei Wang, Li Qiong An, Min Liu, and Li Dong Chen. "Infrared to Visible Upconversion Luminescence in Yb3+, Ho3+: Y2O3 Nanocrystalline Powders." In Functionally Graded Materials VIII, 95–100. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-970-9.95.
Full textWu, Shao Yi, Qiang Fu, Guang Duo Lu, and Jin Song Yao. "Investigations of the axial displacements of Co2+and Ni3+ in Al2O3." In Defect and Diffusion Forum, 93–102. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/3-908451-37-x.93.
Full textConference papers on the topic "SU8"
Yu, Liming, C. Iliescu, F. e. h. Tay, and Bangtao Chen. "SU8 Adhesive Bonding using Contact Imprinting." In 2006 International Semiconductor Conference. IEEE, 2006. http://dx.doi.org/10.1109/smicnd.2006.283965.
Full textde Avila, Luis F., and Lucila Cescato. "Kinetic of Photoacid Generation in SU8 Negative Photoresists." In Latin America Optics and Photonics Conference. Washington, D.C.: OSA, 2010. http://dx.doi.org/10.1364/laop.2010.we34.
Full textHernandez-Romano, I., D. A. May-Arrioja, J. J. Sanchez-Mondragon, and Peter J. Delfyett. "Fabrication of SU8/SWCNT films as saturable absorbers." In 2010 IEEE Photonics Society Summer Topical Meeting Series. IEEE, 2010. http://dx.doi.org/10.1109/phosst.2010.5553674.
Full textHolland, Anthony S., Arnan Mitchell, Vishal S. Balkunje, Mike W. Austin, and Mukund K. Raghunathan. "Fabrication of raised and inverted SU8 polymer waveguides." In Photonics Asia 2004, edited by Hai Ming, Xuping Zhang, and Maggie Yihong Chen. SPIE, 2005. http://dx.doi.org/10.1117/12.579457.
Full textHolland, Anthony S., Vishal S. Balkunje, Arnan Mitchell, Michael W. Austin, Mukund K. Raghunathan, and Gorgi Kostovski. "Effects of design geometry on SU8 polymer waveguides." In Smart Materials, Nano-, and Micro-Smart Systems, edited by Said F. Al-Sarawi. SPIE, 2005. http://dx.doi.org/10.1117/12.582267.
Full textEnikov, Eniko T., and Kalin V. Lazarov. "Metallic Microactuators Based on Sacrificial Layer SU8 Release." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-43200.
Full textTsai, K. L., M. Ziaei-Moayyed, N. Klejwa, R. N. Candler, W. Hu, S. X. Wang, and R. T. Howe. "CHARACTERIZATION OF MAGNETIC NANOPARTICLE-EMBEDDED SU8 FOR MICROACTUATION." In 2008 Solid-State, Actuators, and Microsystems Workshop. San Diego: Transducer Research Foundation, 2008. http://dx.doi.org/10.31438/trf.hh2008.44.
Full textMischke, Helge, Gabi Gruetzner, and Mark Shaw. "Plasma etching of polymers like SU8 and BCB." In Micromachining and Microfabrication, edited by John A. Yasaitis, Mary Ann Perez-Maher, and Jean Michel Karam. SPIE, 2003. http://dx.doi.org/10.1117/12.472734.
Full textBain, Fiona M., Andreas E. Vasdekis, and Graham A. Turnbull. "Holographic recording of sub-micron period gratings and photonic crystals in the photoresist SU8." In Optics & Photonics 2005, edited by Elizabeth A. Dobisz and Louay A. Eldada. SPIE, 2005. http://dx.doi.org/10.1117/12.616718.
Full textHervas, Javier, Joaquin Perez, Isaac Suarez, Pedro J. Rodriguez Canto, Rafael Abargues, Juan P. Martinez-Pastor, Salvador Sales, and Jose Capmany. "MWP true time delay implemented in PbS-SU8 waveguides." In 2015 17th International Conference on Transparent Optical Networks (ICTON). IEEE, 2015. http://dx.doi.org/10.1109/icton.2015.7193350.
Full textReports on the topic "SU8"
Nikolich, Michael Borivoje. Study of the Rare Hadronic Decays D+s → K+π0, D+s → π+ K0s and D+s → π+ π0 at BaBar. Office of Scientific and Technical Information (OSTI), February 2007. http://dx.doi.org/10.2172/1083534.
Full textYu, Shin-Shan. First Measurement of the Ratio of Branching Fractions Β(Λb → Λc+μ-¯νμ)/Β(Λb → Λc+π-) at CDF II. Office of Scientific and Technical Information (OSTI), January 2005. http://dx.doi.org/10.2172/15017217.
Full textLizarraga, Marco Antonio Carrasco. Measurement of the B0s lifetime using the semileptonic decay channel B0s → D-sμ+vX. Office of Scientific and Technical Information (OSTI), November 2009. http://dx.doi.org/10.2172/1128092.
Full textRoss, Anthony. Measurement of CP Violation in B0d Mixing Using B0d → D*-μ+(νμ)X Decays. Office of Scientific and Technical Information (OSTI), September 2012. http://dx.doi.org/10.2172/1128093.
Full textPounder, Nicola Louise. Measurement of the B0s lifetime in B0s → K+ K- decays. Office of Scientific and Technical Information (OSTI), January 2009. http://dx.doi.org/10.2172/948597.
Full textMumford, Jonathan Reid. Measurement of the Λ0b lifetime in Λ0b → Λ+cπ- decays at the Collider Detector at Fermilab. Office of Scientific and Technical Information (OSTI), September 2008. http://dx.doi.org/10.2172/982485.
Full textSchubert, Jens. Reconstruction of B-→ D*0 e- $\bar{v}$e Decays and Determination of |Vcb|. Office of Scientific and Technical Information (OSTI), January 2006. http://dx.doi.org/10.2172/915390.
Full textHartz, Mark Patrick. Measurement of the B±c Meson Lifetime Using B±c→ J/Ψ + l± + X Decays. Office of Scientific and Technical Information (OSTI), January 2008. http://dx.doi.org/10.2172/948596.
Full textYamartino, Robert J. A Study of the Reactions K¯0P → Λπ+ and K¯0P → Σ¯0p → Σ0π+ From 1 GeV/c to 12 GeV/c. Office of Scientific and Technical Information (OSTI), June 2018. http://dx.doi.org/10.2172/1453931.
Full textHabarakada Liyanage, Anusha Pushpakumari. Proton form factor ratio, μpGEP/GMP from double spin asymmetry. Office of Scientific and Technical Information (OSTI), August 2013. http://dx.doi.org/10.2172/1105955.
Full text