Books on the topic 'Structural dynamics Testing'

S, Bursi Oreste, Salençon Jean, Schneider Wilhelm, Schrefler Bernhard, Serafini Paolo, Wagg David, and SpringerLink (Online service), eds. Modern Testing Techniques for Structural Systems: Dynamics and Control. Vienna: Springer Vienna, 2008.

Modal testing: Theory and practice. Taunton, Somerset, England: Research Studies Press, 1995.

S, Shin Y., Zukas Jonas A, Levine H. S, Jerome D. M, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., and Pressure Vessels and Piping Conference (1997 : Orlando, Fla.), eds. Structures under extreme loading conditions, 1997: Presented at the 1997 ASME Pressure Vessels and Piping Conference, Orlando, Florida, July 27-31, 1997. New York: American Society of Mechanical Engineers, 1997.

1965-, Cadoni Ezio, and Di Prisco Marco, eds. Performance, protection and strengthening of structures under extreme loading: Selected, peer reviewed papers of the Third International Workshop on Performance, Protection and Strengthening of Structures under Extreme Loading, PROTECT2011, 30 August - 1 September, 2011, Lugano, Switzerland. Durnten-Zurich: TTP, Trans Tech Publications, 2011.

Kenchikubutsu no gensui: Damping in buildings. Tōkyō: Nihon Kenchiku Gakkai, 2000.

United States. National Aeronautics and Space Administration., ed. A determination of the external forces required to move the benchmark active controls testing model in pure plunge and pure pitch. [Washington, DC]: National Aeronautics and Space Administration, 1993.

Dynamics of pavement structures. London: E & FN Spon, 1994.

Ebeling, Robert M. Accuracy of response of single-degree-of-freedom systems to ground motion. Vicksburg, Miss: U.S. Army Engineer Waterways Experiment Station, 1997.

International Measurement Confederation. Technical Committee TC15. Conference. 1st Conference of the Technical Committee (TC15) on measurement of static and dynamic parameters of structures and materials, Plzen, Czechoslovakia, May 26-28, 1987: Proceedings. Edited by Havrilla K. Commack, N.Y: Nova Science Publishers, 1988.

Allwes, Richard A. Arch canopy verification tests. Washington, D.C: Bureau of Mines, U.S. Dept. of the Interior, 1990.

Modal testing: Theory, practice, and application. 2nd ed. Baldock, Hertfordshire, England: Research Studies Press, 2000.

Zipf, R. Karl. Compendium of structural testing data for 20-psi coal mine seals. Pittsburgh, PA: Dept. of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, Pittsburgh Research Laboratory, 2009.

DeAngelis, V. Michael. Techniques for hot structures testing. Edwards, Calif: NASA Ames Research Center, Dryden Flight Research Facility, 1990.

DeAngelis, V. Michael. Techniques for hot structures testing. Edwards, Calif: NASA Ames Research Center, Dryden Flight Research Facility, 1990.

International Measurement Confederation. Technical Committee on Measurement of Static and Dynamic Parameters of Structures and Materials. Conference. 1st Conference of the Technical Committee (TC15) on Measurement of Static and Dynamic Parameters of Structures and Materials: Plzen, Czechoslovakia, May 26-28, 1987 : proceedings. Edited by Havrilla K and International Measurement Confederation. Commack, N.Y: Nova Science Publishers, 1988.

Active control of flexible structures: From modeling to implementation. London: Springer, 2010.

Conference on Mechanical Vibration and Noise (11th 1987 Boston, Mass.). Modal testing and analysis: Presented at the 1987 ASME Design Technology Conferences--11th Biennial Conference on Mechanical Vibration and Noise, Boston, Massachusetts, September 27-30, 1987. New York, N.Y. (345 E. 47th St., New York 10017): American Society of Mechanical Engineers, 1987.

V, Frolov K., and Menyailov A. I, eds. Vibroacoustical diagnostics for machines and structures. Taunton, Somerset, England: Research Studies Press, 1991.

Garcia-Badell, Jose Javier. Calculo por computador de estructuras de concreto. Madrid: McGraw-Hill, 1995.

Byczkowska, Maria. Analiza naprężeń wywołanych skurczem utwardzania żywic epoksydowych i poliestrowych. Warszawa: Wydawnictwa Politechniki Warszawskiej, 1987.

National Seminar on Aerospace Structures (11th 2002 Bangalore, India). XI National Seminar on Aerospace Structures, 8-9 February, 2002: Theme, experimental techniques and testing methods. Edited by Balasubramaniam R, Mangalgiri P. D, Vijaya Vittala N. G, Aeronautics Research & Development Board., and National Aerospace Laboratories (India). New Delhi: Allied Publishers, 2002.

(undifferentiated), Walter Kaufmann. Strength and deformations of structural concrete subjected to in-plane shear and normal forces. Basel: Birkhäuser Verlag, 1998.

Newhook, John Patrick. The behaviour of steel-free concrete bridge deck slabs under static loading conditions. Halifax, N.S: Nova Scotia CAD/CAM Centre, Dalhousie University, 1997.

Investigación no destructiva y cargas extremas en estructuras. Bogotá, Colombia: Universidad de los Andes, Facultad de Ingeniería, Departamento de Ingeniería Civil y Ambiental, 2004.

European Conference on spacecraft structures, materials and mechanical testing (1998 Braunschweig, Germany). Proceedings European Conference on spacecraft structures, materials and mechanical testing: 4-6 November [1998], Braunschweig, Germany. Noordwijk, The Netherlands: ESA Publications Division, 1999.

G, Hetherington J., ed. Blast and ballistic loading of structures. Oxford: Butterworth-Heinemann, 1994.

Weichert, Dieter. Limit States of Materials and Structures: Direct Methods. Dordrecht: Springer Netherlands, 2009.

Engineers, Society of Automotive, ed. Structural dynamic testing & analysis. Warrendale, PA: Society of Automotive Engineers, 1986.

Martinček, Gustáv. Dynamics of pavement structures. London: Spon, 1994.

Md.) Pressure Vessels and Piping Conference (2011 Baltimore. Proceedings of the ASME Pressure Vessels and Piping Conference--2011: Presented at ASME 2011 Pressure Vessels and Piping Conference, July 17-21, 2011, Baltimore, Maryland, USA. New York, N.Y: American Society of Mechanical Engineers, 2012.

S, Virdi K., and Institution of Structural Engineers (Great Britain). Informal Study Group for "Model Analysis as a Design Tool"., eds. Structural assessment: The role of large and full-scale testing. London: E&FN Spon, 1997.

McNelis, Mark E. CM-2 environmental/modal testing of Spacehab racks. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2001.

Kellogg, Richard E. Demonstrating structural behavior with simple models. Chicago, Ill: The Author, 1994.

Armer, G. S. T., F. K. Garas, and J. L. Clarke. Structural Design for Hazardous Loads: The Role of Physical Testing. Spon Pr, 1992.

L, Clarke J., Garas F. K, Armer G. S. T, Institution of Structural Engineers (Great Britain). Informal Study Group for "Model Analysis as a Design Tool"., and ACI Committee 444, Models of Concrete Structures., eds. Structural design for hazardous loads: The role of physical testing. London: E & FN Spon, 1992.

(Editor), J. L. Clarke, F. K. Garas (Editor), and G. S. Armer (Editor), eds. Structural Design for Hazardous Loads. Van Nostrand Reinhold Company, 1996.

Modern Testing Techniques for Structural Systems CISM International Centre for Mechanical Sciences. Springer, 2010.

Structural Testing Technology at High Temperature. Society for Experimental, 1991.

1941-, Clarke J. L., Garas F. K, Armer G. S. T, Institution of Structural Engineers. Informal Study Group "Model Analysis as a Design Tool"., American Concrete Institute. Committee 444., and Building Research Establishment, eds. Structural design for hazardous loads: Proceedings of the international seminar held by the Institution of Structural Engineers and the Building Research Establishment, and organized by the Institution of Structural Engineers Informal Study Group "Model Analysis as a Design Tool", in collaboration with American Concrete Institute Committee 444 "Models for Concrete Structures" : Brighton,UK April 17-19 1991. Spon, 1992.

B, Elliott Kenny, Schenk Axel, and Langley Research Center, eds. A consistent-mode indicator for the Eigensystem Realization Algorithm. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

B, Elliott Kenny, Schenk Axel, and Langley Research Center, eds. A consistent-mode indicator for the Eigensystem Realization Algorithm. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Jerome, D. M. Structure Under Extreme Loading Conditions, Fluid Structure Interaction, Structural Mechanics Problems in Reactor Safety: 1999 Asme Pressure Vessels ... Massachusetts, August 1-5, 1999 (P V P). Amer Society of Mechanical, 1999.

M, Jerome D., Ma D. C, Chang Shih-Jung, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., and ASME Pressure Vessels and Piping Conference (1998 : San Diego, California), eds. Structures under extreme loading conditions: Fluid-structure interactions, and structural mechanics problems in reactor safety-1999 : presented at the 1999 ASME Pressure Vessels and Piping Conference, Boston, Massachusetts, August 1-5, 1999. New York, N.Y: American Society of Mechanical Engineers, 1999.

L, Walsh Joanne, and Langley Research Center, eds. Structural optimization of rotor blades with integrated dynamics and aerodynamics. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1989.

Structural optimization of rotor blades with integrated dynamics and aerodynamics. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1989.

Feltrin, Glauco, Babak Moaveni, Joel P. Conte, Rodrigo Astroza, Gianmario Benzoni, and Kenneth J. Loh. Experimental Vibration Analysis for Civil Structures: Testing, Sensing, Monitoring, and Control. Springer, 2018.

Feltrin, Glauco, Babak Moaveni, Joel P. Conte, Rodrigo Astroza, Gianmario Benzoni, and Kenneth J. Loh. Experimental Vibration Analysis for Civil Structures: Testing, Sensing, Monitoring, and Control. Springer, 2017.

United States. National Aeronautics and Space Administration., ed. A determination of the external forces required to move the benchmark active controls testing model in pure plunge and pure pitch. [Washington, DC]: National Aeronautics and Space Administration, 1993.

Dubinsky, Anatoly, Gabi Ben-Dor, and Tov Elperin. Applied High-Speed Plate Penetration Dynamics. Ben Dor Gabi Dubinsky Anatoly Elperin Tov, 2010.

Dubinsky, Anatoly, Gabi Ben-Dor, and Tov Elperin. Applied High-Speed Plate Penetration Dynamics. Springer, 2006.