Books on the topic 'Stress cracking'

Sedriks, A. John. Stress corrosion cracking test methods. Houston, TX: National Association of Corrosion Engineers, 1990.

Cheng, Y. Frank. Stress Corrosion Cracking of Pipelines. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118537022.

Wright, D. C. Environmental stress cracking of plastics. Shawbury, Shrewsbury, Shropshire, U.K: Rapra Technology Ltd., 1996.

Wright, D. C. Environmental stress cracking of plastics. Shawbury, Shrewsbury, Shropshire, U.K: Rapra Technology Ltd., 1996.

Engineers, National Association of Corrosion. Sulphide stress cracking resistant metallic materials for oilfield equipment. Houston: NACE, 1995.

Engineers, National Association of Corrosion. Sulfide stress cracking resistant metallic materials for oilfield equipment. Houston: NACE, 2001.

Koerner, Robert M. Stress cracking behavior of HDPE geomembranes and its prevention. Cincinnati, OH: Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1993.

National Association of Corrosion Engineers. Sulfide stress cracking resistant metallic materials for oilfield equipment. Houston: NACE, 1999.

National Association of Corrosion Engineers. Sulfide stress cracking resistant metallic materials for oilfield equipment. Houston: NACE, 1997.

National Association of Corrosion Engineers. Sulfide stress cracking resistant metallic materials for oilfield equipment. Houston: NACE, 1995.

Saito, Masahiro. Testing the film-induced cleavage model of stress corrosion cracking. Manchester: UMIST, 1993.

Lyle, Fred F. Stress-corrosion cracking susceptibility of weldments in duplex stainless steels. St. Louis, Missouri: Materials Technology Institute of the Chemical Process Industries, 1989.

McNutt, Steven A. Stress relief cracking in copper-precipitation strengthened HSLA-100 steel. Monterey, Calif: Naval Postgraduate School, 1988.

Sriskandarajah, T. Sulphide stress corrosion cracking of oil and gas well equipment. London: HMSO, 1987.

Hitch, Daniel C. A. Stress-corrosion cracking of duplex stainless steel in evaporating seawater. Manchester: UMIST, 1997.

Pang, H. L. J. A literature review of stress intensity factor solutions fora weld toe crack in a fillet welded joint. East Kilbride: National Engineering Laboratory, 1991.

Corrosion/86 Symposium on Environmental Cracking : the Interaction between Mechanisms and Design (1986). Environmentally induced cracking: the interaction between mechanisms and design: Proceedings of the Corrosion/86 Symposium on Environmental Cracking, the Interaction between Mechanisms and Design. Houston, Tex: National Association of Corrosion Engineers, 1988.

McIntyre, Dale R. Guidelines for preventing stress corrosion cracking in the chemical process industries. Columbus, Ohio (1570 Fishinger Rd., Columbus 43221): Materials Technology Institute of the Chemical Process Industries, 1985.

Sriskandarajah, T. Sulphide stress corrosion cracking of oil and gas well equipment: Report. London: H.M.S.O., 1987.

Mat, S. Pitting and stress corrosion cracking of stainless steels in sour environments. Manchester: UMIST, 1996.

McIntyre, Dale R. Experience survey: Stress corrosion cracking of austenitic stainless steels in water. St.Louis: MTI International, 1987.

Salpekar, Satish A. Combined effect of matrix cracking and stress-free edge on delamination. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1990.

Kolkman, H. J. Stress corrosion resistance of damage tolerant aluminum-lithium sheet materials. Amsterdam: National Aerospace Laboratory, 1991.

International Conference and Exposition on Fatigue, Corrosion Cracking, Fracture Mechanics, and Failure Analysis (1985 Salt Lake City, Utah). Corrosion cracking: Proceedings of the corrosion cracking program and related papers presented at the International Conference and Exposition on Fatigue, Corrosion Cracking, Fracture Mechanics, and Failure Analysis, 2-6 December 1985, Salt Lake City, Utah, USA. [Metals Park, Ohio]: American Society for Metals, 1986.

Beavers, J. A. Stress-corrosion-cracking studies on candidate container alloys for the tuff repository. Washington, DC: Division of Regulatory Applications, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1992.

Beavers, J. A. Stress-corrosion-cracking studies on candidate container alloys for the tuff repository. Washington, DC: Division of Regulatory Applications, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1992.

Toivonen, Aki. Stress corrosion crack growth rate measurement in high temperature water using small precracked bend specimens. Espoo [Finland]: VTT Technical Research Centre of Finland, 2004.

Engineers, National Association of Corrosion. Laboratory testing of metals for resistance to sulfide stress cracking in H2S environments. Houston: NACE, 1990.

Suleiman, M. I. The stability of localized corrosion, and its role in initiating stress corrosion cracking. Manchester: UMIST, 1993.

N, Parkins Redvers, Bruemmer S. M, TMS-ASM Joint Corrosion and Environmental Effects Committee., and TMS/MSD Corrosion and Environmental Effects Committee., eds. Parkins Symposium on Fundamental Aspects of Stress Corrosion Cracking: Proceedings of a symposium sponsored by TMS/AMS-MSD Corrosion & Environmental Effects Committee held at the 1991 fall meeting in Cincinnati, Ohio, October 21-24,1991. Warrendale, Pa: Minerals, Metals and Materials Society, 1992.

Wanhill, R. J. H. Spacecraft sustained load fracture control. Amsterdam: National Aerospace Laboratory, 1989.

Morrison, W. B. Alleviation of intergranular failure in stress corrosion cracking of steels by rare earth metaladditions. Luxembourg: Commission of the European Communities, 1986.

Birchall, K. L. The stress corrosion cracking of a low alloy steel in lithiated boric acid solutions. Manchester: UMIST, 1989.

National Association of Corrosion Engineers. Technical Practices Committee. Test method: Testing of metals for resistance to sulfide stress cracking at ambient temperatures. Houston: NACE, 1986.

Clements, Harold William. An analysis of stress absorbing membrane interlayers used to inhibit tensile fatigue reflective cracking. [s.l: The Author], 2001.

Moore, Thomas J. External stress-corrosion cracking of a 1.22-m-diameter Type 316 stainless steel air valve. Cleveland, Ohio: Lewis Research Center, 1993.

Schra, L. Long-term outdoor stress corrosion testing of overaged 7000 series aluminium alloys. Amsterdam: National Aerospace Laboratory, 1988.

Abraham, T. Stress corrosion cracking tests on high-level-waste container materials in simulated tuff repository environments. Washington, D.C: Division of Waste Management, Office of Nuclear Material Safety and Safeguards, U.S. Nuclear Regulatory Commission, 1986.

Labroatory, National Physical, ed. Stress corrosion cracking. Teddington: NPL, 2000.

H, Jones Russell, ed. Stress-corrosion cracking. Materials Park, Ohio: ASM International, 1992.

Jones, Russell H., ed. Stress-Corrosion Cracking. ASM International, 2017. http://dx.doi.org/10.31399/asm.tb.sccmpe2.9781627082662.

Raja, V. S., and Tetsuo Shoji. Stress corrosion cracking. Woodhead Publishing Limited, 2011. http://dx.doi.org/10.1533/9780857093769.

Stress Corrosion Cracking of Pipelines. Wiley, 2013.

Cheng, Y. Frank. Stress Corrosion Cracking of Pipelines. Wiley & Sons, Incorporated, John, 2013.

Center, Turner-Fairbank Highway Research, ed. Stress cracking of HDPE geogrids. McLean, VA (6300 Georgetown Pike, McLean 22101-2296): U.S. Dept. of Transportation, Federal Highway Administration, Research and Development, Turner-Fairbank Highway Research Center, 1998.

Cheng, Y. Frank. Stress Corrosion Cracking of Pipelines. Wiley & Sons, Incorporated, John, 2013.

Wright, D. Environmental Stress Cracking of Plastics. Plastics Design Library, U.S., 1996.

Wright, D. C. Environmental Stress Cracking of Plastics. Smithers Rapra Technology, 2001.

Cheng, Y. Frank. Stress Corrosion Cracking of Pipelines. Wiley & Sons, Incorporated, John, 2013.

Wang, Young-Yi. Residual Stress, Fracture, and Stress Corrosion Cracking: Proceedings. American Society of Mechanical Engineers, 2004.