Academic literature on the topic 'Strength and directionality of influence'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Strength and directionality of influence.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Strength and directionality of influence"
Maina, E., D. N. Crowther, J. R. Banerjee, and B. Mintz. "Influence of directionality on strength and impact behaviour of high strength steels." Materials Science and Technology 28, no. 4 (April 2012): 390–96. http://dx.doi.org/10.1179/1743284711y.0000000061.
Full textJamadar, Akshoy, Chandan Kumar Karan, Subhendu Biswas, and Anindita Das. "Structural influence on stimuli-responsive halogen-bonded luminescent supramolecular polymers from heteroditopic isomers." CrystEngComm 23, no. 8 (2021): 1695–99. http://dx.doi.org/10.1039/d1ce00101a.
Full textMcBeath, Michael K., and Kazunori Morikawa. "Forward-Facing Motion Biases for Rigid and Nonrigid Biologically Likely Transformations." Perceptual and Motor Skills 85, no. 3_suppl (December 1997): 1187–93. http://dx.doi.org/10.2466/pms.1997.85.3f.1187.
Full textKim, Minkyoung, and Soohwan Kim. "Dynamics of macroscopic diffusion across meta-populations with top-down and bottom-up approaches: A review." Mathematical Biosciences and Engineering 19, no. 5 (2022): 4610–26. http://dx.doi.org/10.3934/mbe.2022213.
Full textYannacone, Seth, Marek Freindorf, Yunwen Tao, Wenli Zou, and Elfi Kraka. "Local Vibrational Mode Analysis of π–Hole Interactions between Aryl Donors and Small Molecule Acceptors." Crystals 10, no. 7 (June 30, 2020): 556. http://dx.doi.org/10.3390/cryst10070556.
Full textSherrill, Samantha P., Nicholas M. Timme, John M. Beggs, and Ehren L. Newman. "Partial information decomposition reveals that synergistic neural integration is greater downstream of recurrent information flow in organotypic cortical cultures." PLOS Computational Biology 17, no. 7 (July 12, 2021): e1009196. http://dx.doi.org/10.1371/journal.pcbi.1009196.
Full textCrook, John M., Zoltan F. Kisvárday, and Ulf T. Eysel. "GABA-induced inactivation of functionally characterized sites in cat striate cortex: Effects on orientation tuning and direction selectivity." Visual Neuroscience 14, no. 1 (January 1997): 141–58. http://dx.doi.org/10.1017/s095252380000883x.
Full textYuan, Siqi, Ruixuan Ma, Conghai Wu, and Shuhai Zhang. "Numerical Simulation of Acoustic Scattering by a Rotating Cylinder Based on the Enhanced Optimized Scheme." Journal of Physics: Conference Series 2329, no. 1 (August 1, 2022): 012001. http://dx.doi.org/10.1088/1742-6596/2329/1/012001.
Full textAitken, A. R. A., E.-J. Holden, and M. C. Dentith. "Semiautomated quantification of the influence of data richness on confidence in the geologic interpretation of aeromagnetic maps." GEOPHYSICS 78, no. 2 (March 1, 2013): J1—J13. http://dx.doi.org/10.1190/geo2012-0033.1.
Full textMoncayo-Donoso, Miguelangel, Gustavo A. Rico-Llanos, Diego A. Garzón-Alvarado, José Becerra, Rick Visser, and Marta R. Fontanilla. "The Effect of Pore Directionality of Collagen Scaffolds on Cell Differentiation and In Vivo Osteogenesis." Polymers 13, no. 18 (September 20, 2021): 3187. http://dx.doi.org/10.3390/polym13183187.
Full textDissertations / Theses on the topic "Strength and directionality of influence"
Sell, Andrea J. "The influence of movement on the directionality of space-time representation mappings." Tallahassee, Florida : Florida State University, 2009. http://etd.lib.fsu.edu/theses/available/etd-10302009-134713/.
Full textAdvisor: Michael Kaschak, Florida State University, College of Arts and Sciences, Dept. of Psychology. Title and description from dissertation home page (viewed on May 14, 2010). Document formatted into pages; contains vii, 25 pages. Includes bibliographical references.
Erry, Gavin Robert Geoffrey. "The influence of sensor directionality in array and single-aperture imaging applications." Thesis, Loughborough University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.285917.
Full textStone, Michael H., Margaret E. Stone, and Kimitake Sato. "Endurance: Influence of Strength Training." Digital Commons @ East Tennessee State University, 2017. https://dc.etsu.edu/etsu-works/4572.
Full textEriksson, Malin. "The Influence of Molecular Adhesion on Paper Strength." Doctoral thesis, Stockholm, Department of Fibre and Polymer Technology, School of Chemical Science and Engineering, KTH, Royal Institute of Technlology, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4101.
Full textZhang, Xiaobo. "Influence of drying pressure on interfibre bond strength." Thesis, KTH, Hållfasthetslära (Inst.), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-103891.
Full textLi, Kevin Ka Lun. "Influence of size on punching shear strength of concrete slabs." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0033/MQ64235.pdf.
Full textLi, Kevin Ka Lun 1975. "Influence of size on punching shear strength of concrete slabs." Thesis, McGill University, 2000. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=30259.
Full textTest results obtained from this experimental program are compared with the punching shear predictions of the Canadian CSA A23.3-94 Standard, the American ACI 318-95 Code, the British BS 8110-85 Standard and the European CEB-FIP 1990 Model Code. Predictions were also made using computer program "Response 2000", assuming an equivalent beam analogy to represent the slab. It is concluded that the shear design of slabs, according to the current Canadian and American codes, can be unconservative under certain conditions, particularity for thick slabs. It is recommended that the punching shear expressions of the CSA Standard and the ACI Code be modified to take into account the "size effect" on the punching shear strength of slabs.
Costello, Robert P. "The influence of distance and direction on ground combat strength." Thesis, Monterey, California. Naval Postgraduate School, 1991. http://hdl.handle.net/10945/28285.
Full textKelly, Robert. "The influence of member orientation on hollow section joint strength." Thesis, University of Nottingham, 1998. http://eprints.nottingham.ac.uk/13287/.
Full textLombard, Le Riche. "Influence of surface seal variables on bitumen bond strength properties." Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/95882.
Full textENGLISH ABSTRACT: Surface seals are widely used in South Africa. There are a number of reasons which include affordability, versatility and durability. There are, however, in some cases problems with stone loss that can lead to a shortened lifespan of the pavement. The loss of aggregate chippings in surface seals poses a major problem in the seal pavement industry. This study aims to identify the influencing factors that lead to these adhesive failures as well as to find optimum combinations of binders and aggregates at various conditions. Various binders commonly used in South African surface seal construction will be tested using the Bitumen Bond Strength (BBS) test method. The binders used in the study include 80/100 penetration grade bitumen, elastomer modified bitumen, bitumen rubber, elastomer modified emulsion and cationic rapid setting emulsion. Aggregates used in the study include dolerite, granite and quartzite. The test samples were cured and tested at two temperatures, 15 °C and 35 °C. The samples were also cured for 2, 6 and 24 hours respectively. The study tackles a wide range of variables in order to obtain a good understanding of adhesion properties of surface seals used in South Africa. Tests were repeated at least once to ensure repeatability and in some cases up to four repeats were performed. The loading rate at which the tests were performed had a significant influence on the BBS results. This rate varied which complicated the process of comparing the results. It was therefore decided to unify the loading rates. The BBS results exposed the difference between hot applied binders and emulsions. The former having significant stronger adhesion properties. It was also confirmed by the results that temperature plays a key role in the BBS results due to the visco-elastic properties of bitumen. These influences will be discussed along with others such as aggregate types and curing times. The type of failure is also discussed. Failure can either be adhesive or cohesive, the former being a failure between the aggregate and the binder while the later refers to a failure in the binder itself. The results of other students will also be discussed and compared to the results of this study. These include results of predecessors that tested emulsions as well as results from tests done on fractured aggregate surfaces and precoated aggregates. This study showed very similar results as these from other students, except for tests done with emulsions. It was discovered that the method of curing of the emulsions must be adapted to ensure proper curing of the emulsions. It was found that aggregates did not influence the BBS properties to the same extent as temperature and binder application type. The BBS results of hot applied binders also did not significantly increase as the curing time increased, but the results of emulsions showed some increase. However, the emulsions needed more time to cure properly.
AFRIKAANSE OPSOMMING: Oppervlak seëls word algemeen gebruik in Suid-Afrika. Daar is verskeie redes hiervoor waaronder bekostigbaarheid,veelsydigheid en duursaamheid. Daar is egter in sommige gevalle probleme met klipverlies wat kan lei tot n verkorte leeftyd. Hierdie klipverlies ontstaan as gevolg van verskeie redes of kombinasies daarvan. Die studie beoog om hierdie faktore wat die adhesie eienskappe beïnvloed te identifiseer sowel as om optimum kobinasies van bindmiddels en klipsoorte te bewerkstellig by verkeie kondisies. ‘n Verskeidenheid van bindmiddels wat algemeen in Suid-Afrika gebruik word, word in die studie getoets met die Bitumen Bond Sterkte (BBS) toets metode. Die bindmiddels wat in die studie gebruik word sluit 80/100 penetrasie graad bitumen, elastomeer gemodifiseerde bitumen, bitumen rubber, elastomeer gemodifiseerde emulsie en kationiese snel settende emulsie. Die klipsoorte wat vir die studie gebruikword is doleriet, graniet en kwartsiet. Hierdie gesteentes word algemeen in die praktyk gebruik. Die toets monsters word ook by twee temperature gekuur en getoets. Hierdie temperature is 15 °C en 35 °C. Die toets monsters word ook onderskeidelik vir 2, 6 en 24 uur gekuur. Die studie ondersoek 'n wye verskeidenheid van veranderlikes om sodoende 'n goeie begrip van adhesie eienskappe van die oppervlak seëls wat in Suid-Afrika gebruik word te verkry. Elke toets was ten minste een maal herhaal om herhaalbaarheid te verseker. Sommige toetse was tot 4 keer herhaal. Die belasting tempo van die toetse het ‘n beduidende uitwerking op die BBS resultate as gevolg van die visko-elastiese eienskappe van bitumen. Hierdie tempo het gewissel en dit moeilik gemaak om die resultate te vergelyk. Daarom was daar besluit om die tempo van die toetse te verander na ‘n gelykvormige tempo. Daar was ‘n duidelike verskil in BBS resultate van die warm toegepaste bindmiddels en die emulsies. Die warm bindmiddels het baie hoër BBS resultate gelwer. Dit was ook bevestig in die resultate dat temperatuur ‘n beduidende rol speel in die BBS. Hierdie invloede sal bespreek word tesame met ander, soos klipsoorte en kuring tye. Die tipe versaking word ook bespreek. Versaking kan plaasvind as gevolg van adhesie of cohesie, waar adhesie versaking 'n versaking is tussen die klip en die bindmiddel terwyl cohesie versaking verwys na 'n versaking in die bindmiddel self. Die uitslae van die ander studente sal ook bespreek word en vergelyking word met die resultate van hierdie studie. Dit sluit die resultate van voorgangers in wat emulsies getoets het sowel as die resultate van toetse wat gedoen is op gebreekte klipoppervlaktes en bitumen behandelde klippe. Hierdie studie het baie soortgelyke resultate getoon as dié van ander studente, behalwe vir die toetse wat gedoen was met emulsies. Daar is vasgestel dat die metode van kuring van die emulsies moet aangepas word om behoorlike kuring van die emulsies te verseker. Daar is ook gevind dat klipsoorte nie die BBS eienskappe in dieselfde mate as temperatuur en bindmiddel toepassingstipe beïnvloed het nie. Die BBS resultate van warm aangewende bindmiddels het ook nie aansienlik verhoog soos die kuringstyd toegeneem het nie, maar die resultate van emulsies het wel 'n toename getoon. Die emulsies het wel meer tyd nodig gehad om behoorlik te kuur.
Books on the topic "Strength and directionality of influence"
Asthana, R. Influence of CR and W alloying on the fiber-matrix interfacial shear strength in cast and directionally solidified sapphire NiAI composites. Washington, DC: National Aeronautics and Space Administration, 1995.
Find full textCostello, Robert P. The influence of distance and direction on ground combat strength. Monterey, Calif: Naval Postgraduate School, 1991.
Find full textMcCallum, R. Influence of processing route on fatigue behaviour of investment cast high strength steels. Glasgow: NEL, 1985.
Find full textØstermark-Johansen, Lene. Sweetness and strength: The reception of Michelangelo in late Victorian England. Aldershot, Hants, England: Ashgate, 1998.
Find full textWoodward, Kyle. Influence of block and mortar strength on shear resistance of concrete block masonry walls. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1985.
Find full textPodgorniak-Stanik, Bogdan. The influence of concrete strength, distribution of longitudinal reinforcement, amount of transverse reinforcement and member size on shear strength of reinforced concrete. Ottawa: National Library of Canada, 1998.
Find full textUS-Indonesian hegemonic bargaining: Strength of weakness. Aldershot, Hants, England: Ashgate, 2003.
Find full textCarr, Debra Julie. The influence of matrix properties on the compressive strength of CFRP [carbon fibre reinforced plastics]. Birmingham: University of Birmingham, 1994.
Find full textVarghese, J. Influence of scouring and dyeing on strength, abrasion of durable, press cotton: Final technical report. Bombay: Bombay Textile Research Association, 1987.
Find full textAngelakos, Dino. The influence of concrete strength and longitudinal reinforcement ratio on the shear strength of large-size reinforced concrete beams with, and without, transverse reinforcement. Ottawa: National Library of Canada, 1999.
Find full textBook chapters on the topic "Strength and directionality of influence"
Gil, Stephanie, Swarun Kumar, Dina Katabi, and Daniela Rus. "Adaptive Communication in Multi-robot Systems Using Directionality of Signal Strength." In Springer Tracts in Advanced Robotics, 57–77. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-28872-7_4.
Full textRidgway, John P. "Influence of Field Strength on CMR." In Cardiovascular MR Manual, 167–78. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-20940-1_18.
Full textSudarshan, T. S., and T. S. Srivatsan. "Influence of Environment on Strength of Ceramics." In Grain Boundary Controlled Properties of Fine Ceramics, 145–63. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-1878-1_16.
Full textUshakov, Vasily Y. "Influence of Insulation Gap Geometry on Electric Strength." In Insulation of High-Voltage Equipment, 141–68. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-07918-8_6.
Full textPagano, N. J., and R. Byron Pipes. "The Influence of Stacking Sequence on Laminate Strength." In Solid Mechanics and Its Applications, 246–54. Dordrecht: Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-017-2233-9_20.
Full textTran, Ngoc-Thanh, and Diu-Huong Nguyen. "Influence of Matrix Strength on the Pullout Behavior of High Strength Steel Fibers." In Lecture Notes in Civil Engineering, 697–704. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-7160-9_70.
Full textSharma, Himanshu, Basit Majeed, and Sanjay Sharma. "Influence of Nano-modification on Strength Parameters of Concrete." In Lecture Notes in Civil Engineering, 97–105. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7480-7_8.
Full textMeerwal, Suminder, Rajiv Chauhan, and V. Singh. "Influence of slag aggregates on compressive strength of HPC." In Insights and Innovations in Structural Engineering, Mechanics and Computation, 1398. Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742: CRC Press, 2016. http://dx.doi.org/10.1201/9781315641645-229.
Full textWang, Shuying, Pengfei Liu, and Jiazheng Zhong. "Influence Factors of the Adhesion Strength of Clayey Soil." In Advances in Innovative Geotechnical Engineering, 57–64. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-80316-2_6.
Full textWang, Ru, Chun An Tang, Shu Hong Wang, Zhi Yuan Wang, and Tian Hui Ma. "Influence of Different Loading Modes on Rock Tensile Strength." In Key Engineering Materials, 2553–56. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.2553.
Full textConference papers on the topic "Strength and directionality of influence"
Ewans, Kevin, and Philip Jonathan. "The Effect of Directionality on Northern North Sea Extreme Wave Design Criteria." In ASME 2007 26th International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2007. http://dx.doi.org/10.1115/omae2007-29657.
Full textStewart, Calvin M., and Ali P. Gordon. "Anisotropic Creep Damage and Elastic Damage of Notched Directionally Solidified Materials." In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-46476.
Full textKaneko, Yasutomo. "Study on Vibration Characteristics of Single Crystal Blade and Directionally Solidified Blade." In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-45032.
Full textMatsumi, Y., E. P. D. Mansard, and J. Rutledge. "Influence of Wave Directionality on Stability of Breakwater Heads." In 24th International Conference on Coastal Engineering. New York, NY: American Society of Civil Engineers, 1995. http://dx.doi.org/10.1061/9780784400890.102.
Full textPozzo, Liliana d. Y., Adriana Fontes, André A. de Thomaz, Luiz C. Barbosa, Diana C. Ayres, Selma Giorgio, and Carlos L. Cesar. "Chemotaxis study using optical tweezers to observe the strength and directionality of forces of Leishmania amazonensis." In SPIE Optics + Photonics, edited by Kishan Dholakia and Gabriel C. Spalding. SPIE, 2006. http://dx.doi.org/10.1117/12.680999.
Full textTsai, Shou-En, Wan-Lun Tsai, Tse-Yu Pan, Chia-Ming Kuo, and Min-Chun Hu. "Does Virtual Odor Representation Influence the Perception of Olfactory Intensity and Directionality in VR?" In 2021 IEEE Virtual Reality and 3D User Interfaces (VR). IEEE, 2021. http://dx.doi.org/10.1109/vr50410.2021.00050.
Full textAkutsu, Ayako, Sanjeema Bajracharya, Eiichi Sasaki, Tetsuhiro Shimozato, and Masayuki Tai. "Eddy current based evaluation of axial force of high-strength bolts." In IABSE Congress, Christchurch 2021: Resilient technologies for sustainable infrastructure. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/christchurch.2021.0045.
Full textde Ysasa Pozzo, Liliana, Adriana Fontes, André A. de Thomaz, Luiz Carlos Barbosa, Diana Copi Ayres, Selma Giorgio, and Carlos Lenz Cesar. "Leishmania amazonensis chemotaxis under glucose gradient studied by the strength and directionality of forces measured with optical tweezers." In Biomedical Optics (BiOS) 2007, edited by Daniel L. Farkas, Robert C. Leif, and Dan V. Nicolau. SPIE, 2007. http://dx.doi.org/10.1117/12.701196.
Full text"Bond Influence on Rotation Capacity of High-Strength and and Normal Strength Beams." In SP-186: High-Performance Concrete: Performance and Quality of Concrete Structures. American Concrete Institute, 1999. http://dx.doi.org/10.14359/5559.
Full textFox, S. A., S. Lis, S. E. J. Q'Kane, D. W. E. Allsopp, and J. Sarma. "Influence of geometry on the directionality of light emission of nanorod array vertical light emitting diodes." In 2014 10th International Conference on Advanced Semiconductor Devices & Microsystems (ASDAM). IEEE, 2014. http://dx.doi.org/10.1109/asdam.2014.6998705.
Full textReports on the topic "Strength and directionality of influence"
Flávio F., Mendes, Lima Luciano R. O. de, Vellasco Pedro C. G. da S., Rodrigues Monique C., and Neves Luis F. C. INFLUENCE OF CHORD STRESSES ON THE STRENGTH OF RHS JOINTS. The Hong Kong Institute of Steel Construction, December 2018. http://dx.doi.org/10.18057/icass2018.p.024.
Full textGabor, Reka. The influence of halloysite content on the shear strength of kaolinite. Portland State University Library, January 2000. http://dx.doi.org/10.15760/etd.3206.
Full textNewbolds, Scott, and J. Olek. Influence of Curing Conditions on Strength Properties and Maturity Development of Concrete. West Lafayette, IN: Purdue University, 2002. http://dx.doi.org/10.5703/1288284313251.
Full textHelmbold, Robert L., and Allan S. Rehm. The Influence of the Numerical Strength of Engaged Forces on their Casualties. Fort Belvoir, VA: Defense Technical Information Center, September 1991. http://dx.doi.org/10.21236/ada241534.
Full textWoodward, Kyle, and Frank Rankin. Influence of block and mortar strength on shear resistance of concrete block masonry walls. Gaithersburg, MD: National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3143.
Full textPfeifle, T. W., P. E. Senseny, and K. D. Mellegard. Influence of variables on the consolidation and unconfined compressive strength of crushed salt: Technical report. Office of Scientific and Technical Information (OSTI), January 1987. http://dx.doi.org/10.2172/6883385.
Full textPalomino, Angelica. Data for Influence of Flocculant on Flow Behavior and Undrained Shear Strength of Fine Coal Refuse. University of Tennessee, Knoxville Libraries, October 2020. http://dx.doi.org/10.7290/uwwfy6ucbz.
Full textPalomino, Angelica. Data for Influence of Flocculant on Flow Behavior and Undrained Shear Strength of Fine Coal Refuse. University of Tennessee, Knoxville Libraries, October 2020. http://dx.doi.org/10.7290/xm68gpmmvq.
Full textBrinkman, C., G. Begun, R. Graves, W. Kahl, K. Liu, and B. West. Influence of diesel engine exposure on the rupture strength of silicon nitride and partially stabilized zirconia. Office of Scientific and Technical Information (OSTI), June 1990. http://dx.doi.org/10.2172/6715279.
Full textXv, Xiaoyun, Xiao'ao Xue, and Yinghui Hua. Do strength trainings influence ankle functions in patients with chronic ankle instability ? A systematic review with meta-analyses. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, January 2021. http://dx.doi.org/10.37766/inplasy2021.1.0032.
Full text