Journal articles on the topic 'Stratigraphic Otway Basin (Vic'

Recent exploration by BHP Petroleum in VIC/ P30 and VIC/P31, within the eastern Otway Basin, has contributed significantly to our understanding of the depositional history of the Paleocene to Eocene siliciclastic Wangerrip Group. The original lithostratigraphic definition of this group was based on outcrop description and subsequently applied to onshore and, more recently, offshore wells significantly basinward of the type sections. This resulted in confusing individual well lithostratigraphies which hampered traditional methods of subsurface correlation.A re-evaluation of the Wangerrip Group stratigraphy is presented based on the integration of outcrop, wireline well log, palynological and reflection seismic data. The Wangerrip Group can be divided into two distinct units based on seismic and well log character. A lower Paleocene succession rests conformably on the underlying Maastrichtian and older Sherbrook Group, and is separated from an overlying Late Paleocene to Eocene succession by a significant regional unconformity. This upper unit displays a highly progradational seismic character and is named here as the Wangerrip Megasequence.Regional seismic and well log correlation diagrams are used to illustrate a subdivision of the Wangerrip Megasequence into eight third-order sequences. This sequence stratigraphic subdivision of the Wangerrip Group is then used to construct a chronostratigraphic chart for the succession within this part of the Otway Basin.

The Thylacine and Geographe gas fields were discovered in mid-2001 in the offshore Otway Basin, in permits T/30P and VIC/P43 respectively. Geographe is 55 km south of Port Campbell and Thylacine is a further 15 km offshore, in the depo-centre of the Shipwreck Trough, in water depths of 80 m to 100 m. The Thylacine–1 well intersected a 277 m gas column in Turonian to Santonian aged reservoirs. Geographe–1 intersected a 233 m gas column in a similar sedimentary section. Thylacine–2, 5.7 km west of Thylacine–1, confirmed the field extent, and flowed gas at 28 MMSCFD (0.79 Mm3/D). Critical to the discovery of these fields was the Investigator 3D seismic survey, which covered about 1,000 km2 of the central Shipwreck Trough. The pre-drill chance of success of both structures was high-graded as a result of excellent structural imaging and the conformance of amplitude and AVO anomalies to mapped closures. The interpretation of this survey and the subsequent drilling of the Thylacine and Geographe Fields have dramatically increased the understanding of the structure and stratigraphy of the offshore eastern Otway Basin particularly in relation to the Shipwreck Trough and the Sorell Fault Zone.Combined dry gas reserves at the proved and probable level stand at 0.85 TCF and condensate reserves at 10.7 MMBBL. The fields are undergoing integrated sub-surface, development and environmental studies with the aim of supplying the nearby southeastern Australian gas markets. The preferred development concept is a small jacket structure at Thylacine, followed by a subsea tie-in of the Geographe Field with onshore processing facilities near Port Campbell.

The inboard areas of the Otway Basin, particularly the Shipwreck Trough, are well explored and a petroleum-producing province. However, outboard in water depths greater than 500m, the basin is underexplored with distant well control and sparse 2D reflection seismic data coverage. The presence of a successful petroleum province onshore and in shallow waters raises the question as to whether these plays may extend further outboard into the deep-water areas. In the deep-water area, structural complexity and poor imaging of events in the legacy seismic data have resulted in interpretation uncertainty and consequentially a high-risk profile for explorers. The 2020 Otway Basin seismic program acquired over 7000-line km of 2D reflection seismic data across the deep-water Otway Basin. In addition, over 10000km of legacy 2D seismic data were reprocessed to improve the tie between the inboard wells and the new seismic grid. This new dataset provides the first clear insight into the structural and stratigraphic framework of this frontier area, including better imaging of the sedimentary section and the lower crust, increased structural resolution and improved calibration of the outboard seismic reflectors via ties to the inboard wells. Interpretation of the new data has led to an improved assessment of the structural elements and the extension of regional supersequences into the deep-water areas. These refinements have been used as input into petroleum systems modelling work and will provide a foundation for future work to understand petroleum prospectivity, including the distribution of source, reservoir and seal facies.

In the past 100 years of hydrocarbon exploration in the Otway Basin more than 170 exploration wells have been drilled. Prior to 1993, success was limited to small onshore gas fields. In early 1993, the La Bella-1 and Minerva-1 wells discovered significant volumes of gas in Late Cretaceous sandstones within permits VIC/P30 and VIC/P31 in the offshore Otway Basin. They are the largest discoveries to date in the basin and have enabled new markets to be considered for Otway Basin gas. These discoveries were the culmination of a regional evaluation of the Otway Basin by BHP Petroleum which highlighted the prospectivity of VIC/P30 and VIC/P31. Key factors in this evaluation were:geochemical studies that indicated the presence of source rocks with the potential to generate both oil and gas;the development of a new reservoir/seal model; andimproved seismic data quality through reprocessing and new acquisition.La Bella-1 tested the southern fault block of a faulted anticlinal structure in the southeast corner of VIC/P30. Gas was discovered in two Late Cretaceous sandstone intervals of the Shipwreck Group (informal BHP Petroleum nomenclature). Reservoirs are of moderate to good quality and are sealed vertically, and by cross-fault seal, by Late Cretaceous claystones of the Sherbrook Group. The gas is believed to have been sourced from coals and shales of the Early Cretaceous Eumeralla Formation and the structure appears to be filled to spill as currently mapped. RFT samples recovered dry gas with 13 moI-% CO2 and minor amounts of condensate.Minerva-1 tested the northern fault block of a faulted anticline in the northwest corner of VIC/ P31. Gas was discovered in three excellent quality reservoir horizons within the Shipwreck Group. Late Cretaceous Shipwreck Group silty claystones provide vertical and cross-fault seal. The hydrocarbon source is similar to that for the La Bella accumulation and the structure appears to be filled to spill. A production test was carried out in the lower sand unit and flowed at a rig limited rate of 28.8 MMCFGD (0.81 Mm3/D) through a one-inch choke. The gas is composed mainly of methane, with minor amounts of condensate and 1.9 mol-% C02. Minerva-2A was drilled later in 1993 as an appraisal well to test the southern fault block of the structure to prove up sufficient reserves to pursue entry into developing gas markets. It encountered a similar reservoir unit of excellent quality, with a gas-water contact common with that of the northern block of the structure.The La Bella and Minerva gas discoveries have greatly enhanced the prospectivity of the offshore portion of the Otway Basin. The extension of known hydrocarbon accumulations from the onshore Port Campbell embayment to the La Bella-1 well location, 55 km offshore, demonstrates the potential of this portion of the basin.

Recent hydrocarbon discoveries in the non-marine rift fill sequence of the Otway Basin at Windermere, Katnook and Ladbroke Grove have upgraded the importance of this relatively poorly known interval of the sedimentary column and provide hydrocarbon trapping models for future exploration. Using a seismic stratigraphic approach based on high resolution seismic data and the geological re-evaluation of many key early wells, a clearer pattern has emerged for the distribution of major reservoir and seal units.The best reservoirs occur in the Crayfish Group 'A', 'B' and 'D' units and the Windermere Member of the Lower Eumeralla Formation. One of the most critical elements in controlling the more prospective areas is the diagenetic characteristics of the main hydrocarbon objective units. Reservoir quality is significantly affected by the abundance or absence of volcanic detritus and depth of burial, and as a result, the most attractive reservoir is the Crayfish 'A' lying at depths shallower than 3000 m. Lateral fault seals and good vertical seals are present at various stratigraphic levels through the sequence for the development of effective traps in fault blocks and anticlines.The Casterton Group and the basal coal measures zone of the Lower Eumeralla Formation overlying the Windermere Member are identified as the most prospective oil sourcing units in the sequence. Secondary oil sourcing intervals occur within the Crayfish 'C' unit and at the top of the Lower Eumeralla Formation. A higher drilling success rate is now expected in the future with hydrocarbon fairways in the supergroup expected to comprise:Fault blocks and anticlines in the more basinal areas, e.g. the Katnook and Ladbroke Grove gas fields.The 'shoulders' of the main rift depocentres where fault traps will be most prevalent, e.g. the Kalangadoo CO2 discovery.Portions of the northern platform lying on migration pathways extending from the main graben (hydrocarbon kitchen) areas.

Geoscience Australia has undertaken a regional seismic mapping study that extends into the frontier deep-water region of the offshore Otway Basin. This work builds on seismic mapping and petroleum systems modelling published in the 2021 Otway Basin Regional Study. Seismic interpretation spans over 18 000 line-km of new and reprocessed data collected in the 2020 Otway Basin seismic program and over 40 000 line-km of legacy 2D seismic data. Fault mapping has resulted in refinement and reinterpretation of regional structural elements, particularly in the deep-water areas. Structure surfaces and isochron maps highlight Shipwreck (Turonian–Santonian) and Sherbrook (Campanian–Maastrichtian) supersequence depocentres across the deep-water part of the basin. These observations will inform the characterisation of petroleum systems within the Upper Cretaceous succession, especially in the underexplored deep-water region.

Vitrinite reflectance data across the Otway Ranges yield a thermal maturity map that indicates the presence of a broad NE-SW trending anticline with strong vergence to the southeast. Surface Rv max values for the central part of the ranges are >1.5 whilst those on both limbs decrease to Apatite fission track analysis of seven Eumeralla (Lower Cretaceous) samples from the coast around Wye River yields an AFTA age of 90±5 Ma, consistent with similar cooling ages measured around most of the SE Australia margin. Modelling of the data is consistent with a stratigraphic age of -100 Ma, rapid heating to −80°C for −5 Ma followed by cooling from 95–80 Ma and further cooling in the Miocene.Geologically the very large asymmetric anticline can be explained by inversion of a thick rift sequence along a major, listric northwest-dipping fault, perhaps soling at mid-crustal levels. This is consistent with structures observed offshore in the Torquay Embayment and is being tested by the AGSO deep seismic profile BMR 920T1. Observed gravity highs in the Otway Ranges may be associated with inverted high density sediments. Fission track analysis indicates that the major cooling was at −90 Ma, which is therefore likely to be the time of inversion. However, this implies compression during continental breakup, the mechanisms of which are not fully understood.

The Otway Basin is one of the best known and most actively explored of a series of Mesozoic basins formed along the southern coastline of Australia by the rifting of the Antarctic and Australian plates during the Cretaceous. The basin offers a diversity of play types, with at least three major sedimentary sequences forming conventional targets for petroleum exploration in the onshore basin. The Penola Trough in South Australia has enjoyed over 20 years of commercial hydrocarbon production from the sandstones of the Early Cretaceous Otway Group comprising the Crayfish Subgroup (Pretty Hill Formation and Katnook sandstones) and Eumeralla Formation (Windermere Sandstone Member). Lithostratigraphic characterisation and nomenclature for these sequences are poorly constrained, challenging correlation across the border into the potentially petroleum prospective Victorian Penola Trough region. The Geological Survey of Victoria (GSV), as part of the Victorian Gas Program, commissioned Chemostrat Australia to undertake an 11-well chemostratigraphic study of the Victorian Otway Basin. The South Australia Department for Energy and Mining, GSV and Chemostrat Australia are working collaboratively to develop a consistent, basin-wide schema for the stratigraphic nomenclature of the Otway Basin within a chemostratigraphic framework. Variability in the mineralogy and hence inorganic geochemistry of sediments reflects changes in provenance, lithic composition, facies changes, weathering and diagenesis. This geochemical variation enables the differentiation of apparently uniform sedimentary successions into unique sequences and packages, aiding in the resolution of complex structural relationships and facies changes. In this paper, we present the preliminary results of detailed geochemical analyses and interpretation of 15 wells from across the Otway Basin and the potential impacts on hydrocarbon prospectivity.

The Otway Basin is a northwest-southeast trending passive margin rift basin over 500km long and forms part of the Jurassic-Cretaceous Australian Southern Rift System. Exploration for oil and gas has, to date, focused on the onshore shelfal portions targeting thick early Cretaceous depocentres. Outboard, under deep-water areas, potential hydrocarbon resources in thick late Cretaceous depocentres remain significantly under-explored, with limited sparse legacy 2D seismic lines and no wells drilled to date. As a result, little is known about the potential continuation of the proven hydrocarbon plays, or indeed the presence of new plays, in the outboard areas. The 2020 Otway Basin seismic program was carried out with the key objectives being to infill data gaps outboard through the acquisition of new 2D seismic lines and improve the quality of legacy datasets inboard through reprocessing. A comprehensive broadband processing and depth imaging workflow was designed to address the inherent subsurface challenges that have inhibited legacy imaging campaigns. The results of this seismic program are improving the interpretability of the full stratigraphic sequence whilst also unravelling deeper crustal elements. This is providing a better understanding of the distribution of regional stratigraphic sequences, both laterally across the basin, and from the shelf to deep-water areas for the first time. As a result, new insights are being gained on both the basin evolution and potential for working petroleum systems.

Exploration in the Bass Basin has mainly concentrated on the Eocene part of the Eastern View Coal Measures with the pre-Eocene stratigraphy hardly being tested. Structural mapping using a good quality Bureau of Mineral Resources regional seismic survey and infill industry seismic data, in conjunction with seismic stratigraphy and well data, has generated an understanding of the structure and stratigraphy of the pre- Eocene basin, which suggests that exploration potential exists in structural and stratigraphic leads of both Paleocene and Cretaceous age.The Paleocene structure is influenced by the reactivation of normal faults developed at the time of the mid Cretaceous rift unconformity and reflects drape over deeper features. Consequently fault dependent structural closures often persist from Paleocene to (?)Jurassic levels. Possible stratigraphic traps are also observed against horst blocks and around the basin margins. The longitudinal fault directions are northwest and west northwest with an oblique northerly direction and a prevailing north northeasterly transverse direction.The Paieocene and Upper Cretaceous part of the Eastern View Coal Measures consists of sands, shales and coals deposited in alluvial fans, on flood plains, and in lakes. These are underlain by Early Cretaceous Otway Groups, sands, shales and volcanics. Both intervals have potential reservoir and source rocks and often occur at mature depths. No pre-Otway Group sediments have been encountered in wells in the Bass Basin. However, the Permo- Carboniferous and possibly Triassic strata that occur in Northern Tasmania exhibit reservoir and source rock potential and may extend offshore beneath the Bass Basin.Pre-Eocene structural and stratigraphic studies of the Bass Basin thus point to reservoir and hydrocarbon source potential for possible multiple hydrocarbon exploration targets.

The frontier deepwater Otway and Sorell basins lie offshore of southwestern Victoria and western Tasmania at the eastern end of Australia’s Southern Rift System. The basins developed during rifting and continental separation between Australia and Antarctica from the Cretaceous to Cenozoic. The complex structural and depositional history of the basins reflects their location in the transition from an orthogonal–obliquely rifted continental margin (western–central Otway Basin) to a transform continental margin (southern Sorell Basin). Despite good 2D seismic data coverage, these basins remain relatively untested and their prospectivity poorly understood. The deepwater (> 500 m) section of the Otway Basin has been tested by two wells, of which Somerset–1 recorded minor gas shows. Three wells have been drilled in the Sorell Basin, where minor oil shows were recorded near the base of Cape Sorell–1. As part of the federal government-funded Offshore Energy Security Program, Geoscience Australia has acquired new aeromagnetic data and used open file seismic datasets to carry out an integrated regional study of the deepwater Otway and Sorell basins. Structural interpretation of the new aeromagnetic data and potential field modelling provide new insights into the basement architecture and tectonic history, and highlights the role of pre-existing structural fabric in controlling the evolution of the basins. Regional scale mapping of key sequence stratigraphic surfaces across the basins, integration of the regional structural analysis, and petroleum systems modelling have resulted in a clearer understanding of the tectonostratigraphic evolution and petroleum prospectivity of this complex basin system.

Cultus Petroleum N.L. began exploration in petroleum permit EPP 23 of the offshore Otway Basin in December 1987. The permit was sparsely explored, containing only 2 wells and poor quality seismic data. A regional study was made taking into account the shape of the basin and the characteristics of the major seismic sequences. A prospective trend was recognised, running roughly parallel to the present shelf edge of South Australia. A new seismic survey was orientated over this prospective trend. The parameters were designed to investigate the structural control of the prospects in the basin. To improve productivity during the survey, north-south lines had to be repositioned due to excessive swell noise on the cable. The new line locations were kept in accordance with the structural model. Field displays of the raw 240 channel data gave encouraging results. Processing results showed this survey to be the best quality in the area. An FK filter was designed on the full 240 channel records. Prior to wavelet processing, an instrument dephase was used to remove any influence of the recording system on the phase of the data. Close liaison was kept with the processing centre over the selection of stacking velocities and their relevance to the geological model. DMO was found to greatly improve the resolution of steeply dipping events and is now considered to be part of the standard processing sequence for Otway Basin data. Seismic data of a high enough quality for structural and stratigraphic interpretation can be obtained from this basin.

Geochemical analysis, petrographic examination and wireline log interpretation have identified intervals within the lower Eumeralla Formation of the Otway Group (Early Cretaceous) with good source potential. The sequence has a maximum penetrated thickness of 260 m and consists of thinly interbedded coal and siltstone deposited in peat swamp and lacustrine environments. Vitrinite is the dominant maceral present in the coal although the proportion of more oil-prone liptinite commonly exceeds 10 per cent. This is consistent with the intermediate Type II/ III kerogen composition indicated by Rock-Eval and is comparable with data from proven terrestrial oil-productive source rocks in the Gippsland and Cooper Basins. The siltstone is organically-lean but has some algal input. Algal-rich lacustrine source rocks could be developed nearer the basin centre.Regional stratigraphic, structural and thermal modelling studies highlight the exploration potential of the Chama Terrace in the northwest Otway Basin. Structures on the terrace are ideally situated to receive a hydrocarbon charge from mature Eumeralla Formation source rocks in fault blocks on the downthrown side of the Tartwaup Hingeline.Seismic mapping of offshore permit EPP 24, and adjacent onshore permit PEL 40, has delineated several large fault blocks where Crayfish Subgroup (Otway Group) reservoir is juxtaposed against, and sealed by, the lower Eumeralla Formation sequence. Drilling scheduled for late 1992 will determine the credibility of the Eumeralla-sourced play and provide a key test of the ultimate hydrocarbon potential of the Otway Basin.

Evaluation of Early Cretaceous source rocks within the onshore Victoria Otway Basin has revealed that thick, mature shales containing predominantly gas-prone and in local concentrations, oil-prone macerals exist northwest of Portland, in the Tyrendarra Embayment, and around the Port Campbell region.Current results of Rock-Eval, bulk composition, gas chromatography, and biomarker analyses, coupled with geohistory and hydrocarbon generation interpretations, indicate that at least three phases of oil generation and expulsion occurred within the basin. The earliest phase, which coincided with the maximum heatflow in the crust around 100 Ma, resulted in the charging of the existing stratigraphic/shoestring traps of the basin. The second and third phases occurred in the eastern end of the basin at around 85 and 60 Ma. There is also evidence to suggest that structural traps of the eastern areas were formed later, during Oligocene time, and that these traps are probably still receiving late-stage charges of hydrocarbons.Although the sparse well density in the basin has resulted in limited, non-uniforin sampling opportunities, several regions with good Early Cretaceous source rocks can be recognised. Some of these good source rock areas are in close proximity to the several known hydrocarbon shows and producing fields. These current studies, which also include a source rock risk analysis indicating source rock adequacy, show that locations for future exploration could include the Casterton-Portland-Mt Gambier western region, the Peterborough-Port Campbell eastern region, and the prospective close peripheries and offshore extensions of these regions.

Seals are one of the main components of the petroleum system, yet their evaluation has received surprisingly little attention in terms of integrated risk assessment. This paper emphasises the need for an integrated multi-disciplinary approach for robust cap and fault seal evaluation so to minimise seal risk. The region of study is the Penola Trough, Otway Basin, where recent improvements in seismic quality, stratigraphic modelling and additional well control have greatly enhanced regional prospectivity.The Laira Formation has the lowest cap seal risk of Penola Trough strata based on empirical data. The Eumeralla Formation has a similar gamma ray log signature to the Laira Formation yet contains a higher frequency of sandy, relatively high permeability horizons. These horizons increase the likelihood of fault juxtaposition and the development of leaky windows that allow cross fault communication.Faults in the Penola Trough display fractal characteristics from seismic to core scale. A prediction of regional fault extension and deformation intensity below seismic resolution is viable since fault systems appear to be systematic. Extrapolation of fault populations to the millimetre scale shows good agreement with fault density recorded in core from a fault damage zone. Deformation intensities close to seismically resolvable faults are indicative of inner damage zone geometry where faults form linked cluster arrays. Microstructural fault analysis indicates the dominant fault processes in the Upper Crayfish Group are grain boundary sliding and cataclasis with gouge quartz cementation. Petrophysical analysis indicates these faults are able to support gas columns of up to 102 m.The relative probability of seal failure due to the development of effective structural permeability within the in-situ stress field indicates that planes at the greatest risk of failure are steeply dipping (>60°) and strike between 110°N and 200°N. Open fractures crosscutting pre-existing faults have been identified through microstructural examination and these may provide a mechanism for trap leakage and tertiary hydrocarbon migration. An integrated technique for mapping the relative risk of seal breach due to the development of effective structural permeability at the seismic scale is also presented.

China Shale-Gas Field Sets Production Record Sinopec recorded China’s highest daily output of shale gas at 20.62 million cubic meters (Mcm) at its Fuling shale-gas field in Chongqing, China, a key gas source for the Sichuan-East gas pipeline. The first major commercial shale-gas project in China, Fuling has continuously broken records for the shortest gasfield drilling cycle while significantly increasing the drilling of high-quality reservoirs covering more than 3 million m, according to Sinopec. Gasfield production construction was also expanded to raise production capacity. The company said the field maintains a daily output of 20 Mcm, producing an estimated 6.7 Bcm per year. Apache and Total Plan Suriname Appraisals Apache filed appraisal plans for its Maka and Sapakara oil discoveries in block 58 offshore Suriname. The company said another submission is expected for Kwaskwasi, the largest find in the block, by the end of the year. Operations continue for Keskesi, the fourth exploration target. There are plans to drill a fifth prospect at Bonboni in the North-Central portion of the concession. Partner company Total is assuming operatorship of the block ahead of next year’s campaigns. BP Emerges as Sole Bid for Offshore Canada Parcels BP was the only operator to place a bid in the Canada-Newfoundland and Labrador Offshore Petroleum Board (C-NLOPB) Call for Bids NL20-CFB01, which offered 17 parcels (4,170,509 hectares) in the eastern Newfoundland region. The successful bid was for Parcel 9 (covering 264,500 hectares) for $27 million in work commitments from BP Canada Energy Group. Subject to BP satisfying specified requirements and receiving government approval, the exploration license will be issued in January 2021. No bids were received for the remaining 16 parcels, which may be reposted in a future Call for Bids. Criteria for selecting a winning bid is the total amount the bidder commits to spend on exploration of the parcel during the first period of a 9-year license, with a minimum acceptable bid of $10 million in work commitments for each parcel. Beach Energy To Drill Otway Basin Well Beach Energy plans to drill at its Artisan-1 well about 32 km offshore Victoria, Australia, in the Otway basin, before the end of 2021. The well, located on Block Vic/P43, was to be spudded in 1H 2020 but was delayed due to COVID-19. The timeframe for drilling was confirmed by the National Offshore Petroleum Safety and Environmental Management Authority, which also said Beach is keeping open the option to suspend the well and develop it, pending reservoir analysis. Anchors, mooring chains, and surface buoys have already been laid for the well, which is in a water depth of approximately 71 m. The well is expected to take approximately 35–55 days to drill, depending on the final work program and potential operational delays. Diamond Offshore’s semisubmersible Ocean Onyx was contracted for the drilling program. Artisan is the first of Beach’s planned multiwell campaigns, which also include development wells at the Geographe and Thylacine fields. Hess Completes Sale of Interest in Gulf of Mexico Field Hess completed the sale of its 28% working interest in the Shenzi Field in the deepwater Gulf of Mexico (GOM) to BHP, the field’s operator, for $505 million. Shenzi is a six-lease development structured as a joint ownership: BHP (operator, 44%), Hess (28%), and Repsol (28%). The acquisition would bring BHP’s working interest to 72%, adding approximately 11,000 BOE/D of production (90% oil). The sale is expected to close by December 2020. Hess CEO John Hess said proceeds from the sale will help fund the company’s investment in Guyana. Greenland Opens New Offshore Areas Greenland opened three new offshore areas for application of oil and gas exploitation licenses off West Greenland. The areas are Baffin Bay, Disko West, and Davis Strait. The country also said it is working on an oil strategy to reduce geological uncertainty by offering an investment package to companies that engage in its Open Door Procedures. The procedures are a first-mover advantage to remove national oil company Nunaoil, as a carried partner, reducing turnover and surplus royalties. It is estimated to reduce the government take by 51.3% to 40.6%. Shell and Impact Oil & Gas Agree to South Africa Farmout Africa Oil announced Impact Oil & Gas entered into two agreements for exploration areas offshore South Africa. The company has a 31.10% share-holding in Impact, a privately owned exploration company. Impact entered into an agreement with BG International, a Shell subsidiary, for the farm-out of a 50% working interest and operatorship in the Transkei and Algoa exploration rights. Shell was also granted the option to acquire an additional 5% working interest should the joint venture (JV) elect to move into the third renewal period, expected in 2024. Algoa is located in the South Outeniqua Basin, east of Block 11B/12B, containing the Brulpadda gas condensate discovery and where Total recently discovered gas condensate. The Transkei block is northeast of Algoa in the Natal Trough Basin where Impact has identified highly material prospectivity associated with several large submarine fan bodies, which the JV will explore with 3D seismic data and then potential exploratory drilling. Impact and Shell plan to acquire over 6,000 km² of 3D seismic data during the first available seismic window following completion of the transaction. This window is expected to be in the Q1 2022. After the closing of the deal, Shell will hold a 50% interest as the operator and Impact will hold 50%. Impact also entered into an agreement with Silver Wave Energy for the farm-in of a 90% working interest and operatorship of Area 2, offshore South Africa. East and adjacent to Impact’s Transkei and Algoa blocks, Area 2 complements Impact’s existing position by extending the entire length of the ultradeepwater part of the Transkei margin. Together, the Transkei and Algoa Blocks and Area 2 cover over 124,000 km2. Area 2 has been opened by the Brulpadda and Luiperd discoveries in the Outeniqua Basin and will be further tested during 2021 by the well on the giant Venus prospect in ultradeepwater Namibia, where Impact is a partner. Impact believes there is good evidence for this Southern African Aptian play to have a common world-class Lower Cretaceous source rock, similar excellent-quality Apto-Albian reservoir sands, and a geological setting suitable for the formation of large stratigraphic traps. Following completion of the farm-in, Impact will hold 90% interest and serve as the operator; Silver Wave will hold 10%. Petronas Awards Sarawak Contract to Seismic Consortium The seismic consortium comprising PGS, TGS, and WesternGeco was awarded a multiyear contract by Petronas to acquire and process up to 105,000 km2 of multisensor, multiclient 3D data in the Sarawak Basin, offshore Malaysia. The contract award follows an ongoing campaign by the consortium in the Sabah offshore region, awarded in 2016, in which over 50,000 km2 of high-quality 3D seismic data have been acquired and licensed to the oil and gas industry to support Malaysia license round and exploration activity. The Sarawak award will allow for a multiphase program to promote exploration efforts in the prolific Sarawak East Natuna Basin (Deepwater North Luconia and West Luconia Province). The consortium is planning the initial phases and is engaging with the oil and gas industry to secure prefunding ahead of planned acquisition, covering both open blocks and areas of existing farm-in opportunities. Total Discovers Second Gas Condensate in South Africa Total made a significant second gas condensate discovery on the Luiperd prospect, located on Block 11B/12B in the Outeniqua Basin, 175 km off the southern coast of South Africa. The discovery follows the adjacent play-opening Brulpadda discovery in 2019. The Luiperd-1X well was drilled to a total depth of about 3,400 m and encountered 73 m of net gas condensate pay in well-developed, good-quality Lower Cretaceous reservoirs. Following a coring and logging program, the well will be tested to assess the dynamic reservoir characteristics and deliverability. The Block 11B/12B covers an area of 19,000 km2, with water depths ranging from 200 to 1800 m. It is operated by Total with a 45% working interest, alongside Qatar Petroleum (25%), CNR International (20%), and Main Street, a South African consortium (10%). The Luiperd prospect is the second to be drilled in a series of five large submarine fan prospects with direct hydrocarbon indicators defined utilizing 2D and 3D seismic data. BP Gas Field Offshore Egypt Begins Production BP started gas production from its Qattameya gasfield development ‎offshore Egypt in the North Damietta offshore concession. Through BP’s joint venture Pharaonic Petroleum Company working with state-owned Egyptian Natural Gas Holding Co., the field, which is ‎expected to produce up to 50 MMcf/D, was developed through a one-well subsea development and tieback to existing infrastructure.‎ Qattameya, whose discovery was announced in 2017, is located approximately 45 km west ‎of the Ha’py platform, in 108 m of water. It is tied back to the Ha’py and Tuart field ‎development via a new 50-km pipeline and connected to existing subsea ‎utilities via a 50-km umbilical. ‎BP holds 100% equity in the North Damietta offshore concession in the East Nile Delta. ‎Gas production from the field is directed to Egypt’s national grid.

A regional seismic interpretation was carried out over the onshore Otway Basin in western Victoria to produce two-way time formation top and thickness images and a structural elements map showing the ages of faulting. This interpretation improved the understanding of tectonic events controlling the evolution of the basin and associated hydrocarbon plays.The early development of the basin involved rifting due to NE–SW extension in the Late Jurassic–Early Cretaceous, producing a number of half-grabens. The rifting conforms with established rift development models, in which half-grabens of alternating vergence are separated by transfer zones displaying complex folding and faulting patterns. Within the northern margin of the basin these half-grabens were filled and rifting ceased prior to the Aptian.An unconformity in the Wangerrip Group has been identified in the basin, corresponding to a change in Southern Ocean spreading rates from slow to fast (52Ma).Compression, resulting in right-lateral wrenching and inversion of previous faults, occurred during the Miocene–Recent.A number of hydrocarbon play types were identified based on the structural mapping carried out. These play types include anticlines associated with transfer zones, tilted fault blocks, buried basement highs, stratigraphic traps, post-Albian horst structures, syndepositional roll-over structures and post-Oligocene normal and reverse fault related structures.

In 2021, a total of 21 areas were released for offshore petroleum exploration. They are located in the Bonaparte Basin, Browse Basin, Northern Carnarvon Basin, Otway Basin, Sorell Basin and Gippsland Basin. Despite COVID-19 negatively impacting the industry, participation in the acreage release nomination process was again robust. However, as has been the case in recent years, industry interest is focussed on those areas that are close to existing discoveries and related infrastructure. In tune with the Australian government’s resource development strategy, the areas being offered for exploration are likely to supply extra volumes of natural gas, both for export to Southeast Asian markets and domestically to meet the forecasted shortage in supply to eastern Australia. According to the 2019 implementation of a modified release process, only one period for work program bidding has been scheduled. The closing date for all submissions is Thursday, 3 March 2022. Geoscience Australia continues to support industry activities by acquiring, interpreting and integrating pre-competitive datasets that are made freely available in the context of the agency’s regional petroleum geological studies. As part of a multidisciplinary study, new data, including regional seismic and petroleum systems modelling, for the Otway Basin are now available. Also, a stratigraphic/sedimentological review of the upper Permian to Early Triassic succession in the southern Bonaparte Basin has been completed, the results of which are being presented at this APPEA conference. Large seismic and well data sets, submitted under the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGSSA), are made available through the National Offshore Petroleum Information Management System (NOPIMS). Additional data and petroleum-related information can be accessed through Geoscience Australia’s data repository.

One of two major play fairways investigated by explorationists in the Otway Basin is the Crayfish Group system. This Tithonian-Barremian aged succession of syn-rift, continental siliciclastics was deposited in gra- ben distributed across the basin. All of the elements of a prospective petroleum province are present: lacustrine source rocks, high-quality quartzose sandstone reservoirs, and thick regional seals that are structured by both syn and post-rift tectonic events setting up a variety of play types.There has been a resurgence of drilling of Crayfish Group prospects in South Australia in the past decade. Some 24 wells penetrating the Crayfish Group have been drilled in South Australia during this period. This has resulted in the discovery of five commercial gas-fields, three non-commercial gasfields and two significant oil shows. Contrasting with this is the paucity of exploration for similar plays in the Victorian Otway Basin where, during the last decade, only six wells have penetrated the Crayfish Group, with one significant oil show recorded. With this in mind, the author has been searching for Victorian analogues of the successful Crayfish Group hydrocarbon discoveries in South Australia. This has involved defining the major Crayfish Group depocentres and evaluating their prospectivity.There are no less than 12 major Crayfish Group depocentres in the Victorian Otway Basin. Most have not been drilled, and those that are explored are rarely penetrated by more than one well. Good quality lacustrine source rocks are intersected on the flanks of these troughs and are also interpreted to exist in the troughs from seismic data. Reservoir sandstones are abundant in the Crayfish Group at a variety of stratigraphic levels in both South Australia and Victoria, as episodes of tec- tonism resulted in the influx of quartzose, high-energy fluvial sands into the Crayfish depocentres. Potential for oil and gas generation and entrapment is demonstrated for many of these graben.

Abstract. Detailed, stratigraphically well-constrained environmental reconstructions are available for Paleocene and Eocene strata at a range of sites in the southwest Pacific Ocean (New Zealand and East Tasman Plateau; ETP) and Integrated Ocean Discovery Program (IODP) Site U1356 in the south of the Australo-Antarctic Gulf (AAG). These reconstructions have revealed a large discrepancy between temperature proxy data and climate models in this region, suggesting a crucial error in model, proxy data or both. To resolve the origin of this discrepancy, detailed reconstructions are needed from both sides of the Tasmanian Gateway. Paleocene–Eocene sedimentary archives from the west of the Tasmanian Gateway have unfortunately remained scarce (only IODP Site U1356), and no well-dated successions are available for the northern sector of the AAG. Here we present new stratigraphic data for upper Paleocene and lower Eocene strata from the Otway Basin, southeast Australia, on the (north)west side of the Tasmanian Gateway. We analyzed sediments recovered from exploration drilling (Latrobe-1 drill core) and outcrop sampling (Point Margaret) and performed high-resolution carbon isotope geochemistry of bulk organic matter and dinoflagellate cyst (dinocyst) and pollen biostratigraphy on sediments from the regional lithostratigraphic units, including the Pebble Point Formation, Pember Mudstone and Dilwyn Formation. Pollen and dinocyst assemblages are assigned to previously established Australian pollen and dinocyst zonations and tied to available zonations for the SW Pacific. Based on our dinocyst stratigraphy and previously published planktic foraminifer biostratigraphy, the Pebble Point Formation at Point Margaret is dated to the latest Paleocene. The globally synchronous negative carbon isotope excursion that marks the Paleocene–Eocene boundary is identified within the top part of the Pember Mudstone in the Latrobe-1 borehole and at Point Margaret. However, the high abundances of the dinocyst Apectodinium prior to this negative carbon isotope excursion prohibit a direct correlation of this regional bio-event with the quasi-global Apectodinium acme at the Paleocene–Eocene Thermal Maximum (PETM; 56 Ma). Therefore, the first occurrence of the pollen species Spinizonocolpites prominatus and the dinocyst species Florentinia reichartii are here designated as regional markers for the PETM. In the Latrobe-1 drill core, dinocyst biostratigraphy further indicates that the early Eocene (∼ 56–51 Ma) sediments are truncated by a ∼ 10 Myr long hiatus overlain by middle Eocene (∼ 40 Ma) strata. These sedimentary archives from southeast Australia may prove key in resolving the model–data discrepancy in this region, and the new stratigraphic data presented here allow for detailed comparisons between paleoclimate records on both sides of the Tasmanian Gateway.

In late 2018, Esso Australia embarked on the drilling of Sculpin-1. Drilled in 2278 m of water, this is Australia’s deepest water exploration well and the first ultra-deep water well in the Gippsland Basin. Drilling of this well was the culmination of a bold exploration campaign in the VIC/P70 permit at the southeastern margin of the prolific hydrocarbon producing Gippsland Basin, which also saw the drilling of Baldfish-1 and Hairtail-1 in 2018. An east coast gas market with a high demand for additional gas resources combined with Esso Australia’s renewed technical focus on the deep and ultra-deep water sectors of the VIC/P70 exploration permit led to the identification of the Sculpin prospect, a stratigraphic lead premised on a late Cretaceous deep water reservoir system flowing into the south east Gippsland Basin depocentre from southern hinterlands. Technical analysis including integrated seismic toolkits, spectral decomposition and colour-blend imaging, rock properties and amplitude versus offset/direct hydrocarbon indicator modelling were key to Esso’s decision to test the new play with the Sculpin-1 well. Although the well did not encounter hydrocarbons, it did provide insights into reservoir quality, source and migration in the previously untested southeastern margin of the basin.

Determining and predicting the interplay of plate tectonic events, subsidence, flexure and depositional systems is important in frontier exploration, play concept development, and maturation modelling. A circum-Australian plate tectonic model is here tied to an internally consistent global plate tectonic model to determine the timing and orientation of changes in the lithospheric stress regime induced by plate tectonic changes. One-and three-dimensional geohistory results for the Otway Basin and North West Shelf/Exmouth Plateau are presented, based on an integrated sequence stratigraphic framework. These geohistory results compare the timing and types of changes in subsidence rate to the changes in lithospheric stress due to plate tectonic changes. Changes in tectonic subsidence rate appear to be discrete events related to plate tectonic changes; subsidence events bound major transgressive-regressive facies cycle packages ('supersequences') in a basin. The recognition of sequence system tracts and especially system tract boundaries within a 'supersequence' is enhanced or diminished by processes occurring only during certain phases of the supersequences. Recognition of lowstand systems tracts and sequence boundaries is improved due to erosion during the regressive phase of the supersequence. Conversely, during the transgressive phase of the supersequence, transgressive and highstand system tracts are emphasised and recognition of flooding surfaces improved. Good reservoir sands form during enhanced lowstands, while good source and sealing shales form during enhanced transgressions.In the southeastern Australian Otway Basin, every perturbation of the tectonic subsidence rate during the Late Cretaceous can be correlated directly to a local and/or global plate tectonic event, and each supersequence is bounded by tectonic events. In the North West Shelf/Exmouth Plateau region of Western Australia, the situation is complicated during the Berriasian by uncompensated f lexural load effects related to the rapid formation and filling of multiple Barrow Delta depocentres. Two supersequences correlate to tectonic events, while one supersequence is bounded by a f lexural subsidence event unrelated to regional or global plate tectonic events. Hence not all perturbations of the tectonic subsidence curve are related to tectonic events, and not all supersequences are bound by tectonic events. Without three-dimensional geohistory techniques, it is impossible to isolate the flexural load effects from the effects of plate tectonic events.

The influence of Neogene tectonics in the SE Australian basins has generally been underestimated in the petroleum exploration literature. However, onshore stratigraphic and offshore seismic data indicates that significant deformation and exhumation (up to one km or more) has occurred during the late Tertiary-Quaternary. This tectonism coincides with a change in the dynamics of the Australian plate, beginning at around 12 Ma, resulting in a WNW–ESE compressional regime which has continued to the present day.Significant late Miocene tectonism is indicated by a regional angular unconformity at around the Mio-Pliocene boundary in the onshore and nearshore successions of the SE Australian basins.Evidence of on going Pliocene- Quaternary tectonism is widespread in all of the SE Australian basins. Late Tertiary tectonism has produced structures in the offshore SE Australian basins which have been favourable targets for petroleum accumulation (e.g. Nerita structure, Torquay Sub-basin; Cormorant structure, Bass Basin). In the offshore Gippsland Basin, most of the oil- and gas-bearing structures have grown during Oligocene-Recent time. Some Gippsland Basin structures were largely produced prior to the mid- Miocene, while others have a younger structural history. In areas of intense late Tertiary exhumation and uplift (e.g. proximal to the Otway and Strzelecki Ranges), burial/maturation models of petroleum generation may be significantly affected by Neogene uplift.Many structures produced by late Miocene-Pliocene deformation are dry. These relatively young structures may post-date the major maturation episodes, with the post-structure history of the basins dominated by exhumation and cooling.

Gas fields in the Port Campbell Embayment cur­rently supply all the natural gas markets (non-LPG) in western Victoria as well as commercial quanti­ties of carbon dioxide (C02) to industrial markets. Initial discoveries made between 1979 and 1981 were brought on-stream in 1986 with production from the North Paaratte field. Another substantial discovery was made in 1988, the Iona gas field, followed by the Boggy Creek C02 field in 1991, then the My lor and Langley fields in 1994. Discovery of Mylor marked the first recovery of oil from the Late Cretaceous Waarre Formation. Extensive 2D seis­mic data sets have been recorded in the region since 1979, and the first 3D seismic survey in the Otway Basin was carried out in 1993 extending beyond the area of the initial discoveries. No data on the fields have been published for nearly a decade and little detail about the structural and stratigraphic geol­ogy of the Late Cretaceous in the area has been documented. Summaries of the fields are presented incorporating many insights gained from interpre­tation of the 3D seismic data and its verification by the 'rotary lie detector'.

A detailed understanding of the in-situ stress tensor within energy-rich basins is integral for planning successful drilling completions, evaluating the reactivation potential of sealing faults and developing unconventional plays where fracture stimulation strategies are required to enhance low permeability reservoirs. Newly available leak-off test results interpreted using a new method for analysing leak-off test data constrains the minimal horizontal stress magnitude for the offshore Shipwreck Trough wells to be ∼20 MPa/km, which is similar to the vertical stress magnitude derived from wireline data for depths shallower than ∼2–2.5 km. Breakouts interpreted from image log data reveal a ∼northwest–southeast maximum horizontal stress orientation and formation pressure tests confirm near-hydrostatic conditions for all wells. The new method for analysing leak-off test data has constrained the upper limit of the maximum horizontal stress magnitude to be the greatest, indicating a reverse-to-strike-slip faulting regime, which is consistent with neotectonic faulting evidence. Petrophysical wireline data and image log data to characterise extant natural fracture populations within conventional reservoirs and stratigraphic units that may be exploited as future unconventional reservoirs have also been used. These fracture sets are compared with possible fracture populations recognised in contiguous, high-fidelity 3D seismic datasets using a new method for identifying fracture systems based on attribute mapping techniques. This study represents the first of its kind in the Otway Basin. Combined analysis of the in-situ stress tensor and fracture density and geometries provides a powerful workflow for constraining fracture-related fluid flow pathways in sedimentary basins.

We present results from a margin-wide analysis of the history of post-breakup Cenozoic compressional deformation and related exhumation along the passive southern margin of Australia, based on a regional synthesis of seismic, stratigraphic and thermochronological data. The Cenozoic sedimentary record of the southern margin contains regional unconformities of intra-Lutetian and late Miocene–Pliocene age, which coincide with reconfigurations of the boundaries of the Indo-Australian Plate. Seismic data show that post-breakup compressional deformation and sedimentary basin inversion—characterised by reactivation of syn-rift faults and folding of post-rift sediments—is pervasive from the Gulf St Vincent to Gippsland basins, and occurred almost continually since the early- to mid-Eocene. Inversion structures are absent from the Bight Basin, which we interpret to be the result of both the unsuitable orientation of faults for reactivation with respect to post-breakup stress fields, and the colder, stronger lithosphere that underlies that part of the margin. Compressional deformation along the southeastern margin has mainly been accommodated by reactivation of syn-rift faults, resulting in folds with varying ages and amplitudes in the post-rift Cenozoic succession. Many hydrocarbon fields in the Otway and Gippsland basins are located in these folds, the largest of which are often associated with substantial localised exhumation. Our results emphasise the importance of constraining the timing of Cenozoic compression and exhumation in defining hydrocarbon prospectivity of the southern margin.

The Halladale and Black Watch fields are adjacent fault-dependent gas accumulations at the Turonian Waarre Formation level situated in the eastern Otway Basin, about 4–5 km from shore in VIC/RL2(v). The two fields were first identified in 2002 when anomalous seismic amplitudes were observed on the tail-ends of several 90s-vintage 2D lines that extended into what was then vacant acreage. After being awarded the block as VIC/P37(v) Origin Energy Limited and its joint venture (JV) partner, Woodside Energy Limited, acquired a 211 km2 full-fold 3D seismic survey over the anomalous amplitudes in late 2003. Subsequent analysis of the seismic volume revealed two tilted fault blocks with strong amplitude variation with offset (AVO) anomalies in the Waarre A and Waarre C units that conformed to structure and appeared to shut off at the same depth. A similar AVO anomaly was also observed in the overlying Santonian Nullawarre Formation, raising the possibility that Halladale and/or Black Watch had leaked or were leaking. In early 2005, the VIC/P37(v) JV drilled two exploration wells targetting the key Waarre C reservoir on the eastern flank of Halladale and eastern crest of Black Watch. Both wells encountered live gas columns in the Waarre C but no GWCs were observed on logs and wireline pressure data indicated the two fields were not in pressure communication. A third well was then drilled down-dip of the Waarre C AVO shut off on the Halladale fault block to obtain a water gradient from the Waarre C. This well proved invaluable in determining the height of the gas columns in the Waarre C at both fields as it showed the gas-water contacts (GWCs) at Halladale (1,760 mSS) and Black Watch (1,770 mSS) were shallow to their respective AVO shut offs by about 20 m and 10 m respectively. Subsequent analysis of shear wave sonic data from the third well indicated there is a 17 m residual gas column at the base of the Halladale Field. This suggests Halladale either leaked slightly at some time in the past or is still leaking. A similar scenario may also occur at Black Watch. Given the close proximity of the two fields to the coast, development scenarios from onshore are now being considered.

Abstract. This multidisciplinary study integrates fades studies and foraminiferal analyses to assess the palaeoenvironmental evolution of an Oligocene to Miocene cool-water carbonate succession in the Otway Basin, southeastern Australia. The cool-water carbonate succession in the Otway Basin records signals relating to the evolution of the Southern Ocean throughout the Cenozoic. The strata are correlated with the relative coastal onlap curve of Haq et al. (1988) and several sequences can be identified in three formations. The Early Oligocene Narrawaturk Formation (TA 4.5) comprises near the base high-energy, inner shelf biofacies (lowstand systems tracts) and up-section to lower energy mid- to outer shelf marls (TST and maximum flooding surfaces) with storm events and/or minor shallowing intervals. Foraminiferal reworking and post-depositional dolomitization occurs at the top of this unit. The Late Oligocene Clifton Formation (TB 1.1 and TB 1.2.) was deposited in a relatively high-energy inner to mid-shelf environment. The base of this unit preserves evidence of a shift in biofacies that correlates to a major sea-level fall at the Mid/Late Oligocene boundary coincident with a major ice advance in Antarctica, and correlates with other Mid-Oligocene unconformities world-wide. The Late Oligocene Gellibrand Marl Formation (TB 1.2 and TB 1.3) began with low-energy outer shelf cherty marly biofacies (TST and MFS) followed by mid- to outer shelf calcisiltites (HST). High-energy mid- to outer shelf conditions were established after an hiatus in the Late Oligocene. A relative sea-level rise at the base of the Lower Miocene (TB 1.5 and TB2.1) led to the deposition of lower energy outer shelf cherty marls.Four biofacies with distinctive foraminiferal faunas are distinguished. (1) Grey mid- to outer shelf low-energy bryozoal marls with infaunal foraminifera and high plankton values. Two foraminiferal assemblages occur: lagenids and Uvigerina are common in the Narrawaturk marls, whereas bolivinids and Astrononion occur in the Gellibrand marls. The faunal variation in the marls may relate to changes in nutrient supply, anoxia, the presence or absence of organic material and/or changes in depth. (2) Chalky packstone facies with a high epifaunal content were deposited in oligotrophic inner to mid-shelf palaeoenvironments subject to intermittent reworking. (3) Bryozoan-poor inner to outer shelf foraminiferal packstones and grainstones facies enriched in epifaunal forms. (4) Well-sorted coarsegrained regular echinoid and bryozoan-rich packstones to grainstones. Infaunal taxa are absent in this facies, where most preserved foraminifera are robust spherical to discoidal forms. The facies were deposited in inner to mid-shelf palaeoenvironments where reworking by intense wave action (either above normal wavebase or by storms) winnowed out all smaller foraminifera.The stratigraphic and palaeoenvironmental utility of the Cenozoic foraminifera studied is improved greatly by facies analyses. Similar integrated studies will lead to better correlations and palaeoenvironmental interpretations of southeastern Australian sequences and equivalent successions in the southern hemisphere.

Strike Oil was a very small unlisted Australian company with a capitalisation of less than A$10 million when it decided to bid for block V98-4 (now VIC/P44) in the offshore Otway Basin in early 1999.Block V98-4 met Strike Oil’s gas strategy of pursuing opportunities in basins close to infrastructure and markets in the eastern states of Australia.Prior to making the bid Strike Oil identified the geological, financial and operational risks associated with exploring the permit, especially with regard to conducting a 3D seismic survey in the environmentally sensitive and sometimes hostile Bass Strait. This led to the implementation of, and adherence to, a comprehensive risk management plan.The geological risks were addressed by acquiring 3D seismic and conducting an analysis of the amplitudes and AVO responses associated with nearby gas discoveries and dry holes.Management of the financial risk centred firstly around not overbidding and secondly finding a farmee who could add value to the permit during both the exploration and exploitation phases.The operational risks were all associated with conducting the Casino 3D seismic survey. Local environmental considerations, particularly in relation to migratory whale species and the seasonal activities of local fishermen, meant there was only a six weeks’ time window available for unhindered operations. This window also coincided with the spring gale season, when weather conditions can stop marine operations.The use of experienced personnel, early stakeholder consultation, and the use of contingency plans, enabled Strike Oil to achieve its objectives under adverse conditions. The Casino 3D seismic survey, despite the odds, was completed on time, under budget, and with less than 7% infill, while still delivering high quality data.The farmout, the acquisition and processing of the 3D seismic data, and the discovery and appraisal of the Casino gas field were all achieved within 14 months.

This study explores an excellent mid-latitude Oligocene calcareous neritic succession that spans the Eocene/Oligocene boundary to the Miocene. Rapid changes in sea level and climate should have a palpable influence on macroevolution and the Eocene-Oligocene transition marks one of the most substantial changes for the Cainozoic.Stratigraphic ranges of some 130 benthic and 20 planktic species occurring in two contrasting marine environments, one relatively restricted (low plankton - Murray Basin) and another more open (high plankton - Otway Basin) to oceanic processes, were identified and correlated with signals derived from changes in the physical environment. The signals include: the ‘Exxon’ sea-level curve, deep sea stable isotope curves, and prominent lithological changes.There is a significant turnover of species at the Eocene/Oligocene boundary. This event impacts on all assemblages and correlation metrics indicate that there is an ‘across-the-board’ response. Interestingly, the turnover corresponds to a local Saint Vincent Basin lithological change from the grey-green, organic rich facies of the Blanche Point Formation to the red-yellow-brown, well oxidized, quartz and bryozoa rich facies of the Port Willunga Formation. This switch is in turn coincident with the saltatory positive deviation in the δ18O top and bottom water curves derived from oceanic sections.The turnover pattern is not repeated at the major sea level fall predicted for the mid Oligocene (at 30 million years), neither is there any comparable lithological transition. Geographically widespread species (common to all environments) cross this supposed prominent type one sequence boundary, there is a signal but the impact on the fauna is less than that detected for the Eocene/Oligocene boundary. Those faunas that were more restricted to open ocean processes exhibited shorter stratigraphic ranges and appeared to be controlled primarily by sea level fluctuation and salinity changes. There is evidence to suggest that foraminiferal faunas of the more restricted environment in southern Australia were less responsive to the well mixed, thermohaline driven ocean of the Oligocene. Generally, Oligocene benthic assemblages are dominated by Cibicides, Notorotalia and Buliminid species in consistently high numbers, indicating a high dominance of relatively few taxa, that is, large populations and low diversity. Faunas of open ocean assemblages demonstrate relatively subdued turnover patterns compared to those of more restricted environments.The Late Eocene displays parallel patterns of foraminiferal turnover and the Oligocene is characterised by inter-basin contrasts. In comparison to the Eocene, faunas appear to be more robust in the psychrosphere constrained ocean of the Oligocene. It is proposed that these patterns indicate that the Latest Eocene was dominated by species adapted to a specialist life strategy while the Oligocene reflect patterns more often associated with opportunist colonization.

Poster G5 Geoscience Australia has undertaken a regional seismic mapping study that extends into the frontier deep-water region of the offshore Otway Basin. This work builds on seismic mapping and petroleum systems modelling published in the 2021 Otway Basin Regional Study. Seismic interpretation spans over 18 000 line-km of new and reprocessed data collected in the 2020 Otway Basin seismic program and over 40 000 line-km of legacy 2D seismic data. Fault mapping has resulted in refinement and reinterpretation of regional structural elements, particularly in the deep-water areas. Structure surfaces and isochron maps highlight Shipwreck (Turonian–Santonian) and Sherbrook (Campanian–Maastrichtian) supersequence depocentres across the deep-water part of the basin. These observations will inform the characterisation of petroleum systems within the Upper Cretaceous succession, especially in the underexplored deep-water region. To access the poster click the link on the right. To read the full paper click here

Presented on Wednesday 18 May: Session 17 Geoscience Australia has undertaken a regional seismic mapping study that extends into the frontier deep-water region of the offshore Otway Basin. This work builds on seismic mapping and petroleum systems modelling published in the 2021 Otway Basin Regional Study. Seismic interpretation spans over 18 000 line-km of new and reprocessed data collected in the 2020 Otway Basin seismic program and over 40 000 line-km of legacy 2D seismic data. Fault mapping has resulted in refinement and reinterpretation of regional structural elements, particularly in the deep-water areas. Structure surfaces and isochron maps highlight Shipwreck (Turonian–Santonian) and Sherbrook (Campanian–Maastrichtian) supersequence depocentres across the deep-water part of the basin. These observations will inform the characterisation of petroleum systems within the Upper Cretaceous succession, especially in the underexplored deep-water region. To access the presentation click the link on the right. To read the full paper click here

Presented on Wednesday 18 May: Session 17 In late 2018, Esso Australia embarked on the drilling of Sculpin-1. Drilled in 2278 m of water, this is Australia’s deepest water exploration well and the first ultra-deep water well in the Gippsland Basin. Drilling of this well was the culmination of a bold exploration campaign in the VIC/P70 permit at the southeastern margin of the prolific hydrocarbon producing Gippsland Basin, which also saw the drilling of Baldfish-1 and Hairtail-1 in 2018. An east coast gas market with a high demand for additional gas resources combined with Esso Australia’s renewed technical focus on the deep and ultra-deep water sectors of the VIC/P70 exploration permit led to the identification of the Sculpin prospect, a stratigraphic lead premised on a late Cretaceous deep water reservoir system flowing into the south east Gippsland Basin depocentre from southern hinterlands. Technical analysis including integrated seismic toolkits, spectral decomposition and colour-blend imaging, rock properties and amplitude versus offset/direct hydrocarbon indicator modelling were key to Esso’s decision to test the new play with the Sculpin-1 well. Although the well did not encounter hydrocarbons, it did provide insights into reservoir quality, source and migration in the previously untested southeastern margin of the basin. To access the presentation click the link on the right. To read the full paper click here

The architecture of canyon-fills can provide a valuable record of the link between tectonics, sedimentation, and depositional processes in submarine settings. In this study, we investigate the role of plate tectonics in the initiation and evolution of submarine canyons. We demonstrate that plate tectonic-scale events (i.e. continental breakup and shortening) have a first-order influence on submarine canyon initiation and development. Initially, the Late Cretaceous (c.65 Ma) separation of Australia and Antarctica resulted in extensional fault systems, which then formed a steep stair-shaped paleo-seabed. Subsequently, the Late Miocene (c.5 Ma) collision of Australia and Eurasia has resulted in substantial uplift and exhumation in the SE Australian continental margin. These tectonic events have resulted in elevated seismicity that ultimately gave rise to the gravity-driven processes (i.e. turbidity currents and mass wasting processes) and formed the canyon base. The inherited stair-shaped topography then facilitated gravity-driven processes which established a mature sediment conduit extending from the shallow marine shelf to the abyssal plain. We indicate that the canyon stratigraphic architecture can be used as an archive to record tectonic movements. Moreover, the factors which preconditioned and triggered gravity-driven processes can also induce canyon initiation and facilitate canyon development.Supplementary material:https://doi.org/10.6084/m9.figshare.c.5937760