Books on the topic 'Strain distribution'

Arya, V. K. Finite element elastic-plastic-creep and cyclic life analysis of a cowl lip. [Washington, D.C.]: National Aeronautics and Space Administration, 1990.

Koop, Randy. The mechanism of the regulation of energy distribution between photosystems 1 and 2 in the cyanobacterium Synechococcus sp. strain PCC 7002. St. Catharines, Ont: Brock University, Dept. of Biological Sciences, 1997.

Gambrell, S. C. Use of photostress to analyze behavior of an aft skirt test specimen. Tuscaloosa, Ala: The University of Alabama, College of Engineering, Bureau of Engineering Research, 1994.

Kniskern, Marc W. Analysis of a six-component, flow-through, strain-gage, force balance used for hypersonic wind tunnel models with scramjet exhaust flow simulation. Raleigh, [N.C.]: North Carolina State University, Dept. of Mechanical and Aerospace Engineering, 1990.

Kniskern, Marc W. Analysis of a six-component, flow-through, strain-gage, force balance used for hypersonic wind tunnel models with scramjet exhaust flow simulation. Raleigh, [N.C.]: North Carolina State University, Dept. of Mechanical and Aerospace Engineering, 1990.

Kniskern, Marc W. Analysis of a six-component, flow-through, strain-gage, force balance used for hypersonic wind tunnel models with scramjet exhaust flow simulation. Raleigh, [N.C.]: North Carolina State University, Dept. of Mechanical and Aerospace Engineering, 1990.

Trewin, Dennis. Population distribution, Aboriginal and Torres Strait Islander Australians, 2001. [Canberra]: Australian Bureau of Statistics, 2002.

N, Litvinchuk S. Ėvoli︠u︡t︠s︡ii︠a︡, sistematika i rasprostranenie grebenchatykh tritonov (Triturus cristatus complex) na territorii Rossii i sopredelʹnykh stran. Sankt-Peterburg: Evropeĭskiĭ Dom, 2009.

A, Levy David. Hydroacoustic estimation of sockeye salmon abundance and distribution in the Strait of Georgia, 1986. Vancouver, B.C: Pacific Salmon Commission, 1991.

Lévy, David. Hydroacoustic estimation of sockeye salmon abundance and distribution in the Strait of Georgia, 1986. Vancouver, B.C: Pacific Salmon Commission, 1991.

Peter, Taylor. White diamonds north: 25 years' operation of the Cook Strait cable, 1965-1990. Wellington: Trans Power, 1990.

Palsson, Wayne A. Results from the 2000 transboundary trawl survey of the eastern Strait of Juan de Fuca and Discovery Bay. [Olympia, Wash.]: Washington Dept of Fish and Wildlife, Fish Program, Fish Management Division, 2002.

Palsson, Wayne A. Results from the 2001 transboundary trawl survey of the southern Strait of Georgia, San Juan Archipelago and adjacent waters. [Olympia, Wash.]: Washington Dept of Fish and Wildlife, Fish Program, Fish Management Division, 2003.

Daly, Dyan Jennifer. A study of the distribution of toxigenic and non-toxigenic group II non-proteolytic clostridium botulinum strains. [S. l: The Author], 1996.

Atkinson, D. B. The distribution and abundance of Greenland halibut, deepwater redfish, golden redfish, roundnose grenadier and roughhead grenadier in Davis Strait. St. John's, Nfld: Science Branch, Dept. of Fisheries and Oceans, Northwest Atlantic Fisheries Centre, 1987.

Sassine, Youssef Najib, ed. Mushrooms: Agaricus bisporus. Wallingford: CABI, 2021. http://dx.doi.org/10.1079/9781800620414.0000.

Can, Nguyen Van. Rozkład napre̜żeń i odkształceń w górotworze lepkospre̜żystym, wywołany obcia̜żeniem dynamicznym: Distributions of stresses and strains in the visco-elastic rock mass caused by the dynamic loading. Kraków: Wydawnictwo AGH, 1990.

Birgel, Daniel. Distribution, composition, flux, and variability of organic carbon in Fram Strait/Yermak Plateau (Arctic Ocean) and (palaeo) environmental significance: Verteilung, Zusammensetzung, Fluss und Variabilität von organischem Kohlenstoff in der Framstrasse/Yermak Plateau (Arktischer Ozean) und die Bedeutung für (Paläo)-Umweltrekonstructionen. Bremerhaven: Alfred-Wegener-Institut für Polar- und Meeresforschung, 2003.

Center, Langley Research, ed. Influence of ply waviness on fatigue life of tapered composite flexbeam laminates. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1999.

Center, Langley Research, ed. Influence of ply waviness on fatigue life of tapered composite flexbeam laminates. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1999.

Strain rate dependent modeling of polymer matrix composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

A back face strain compliance expression for the compact tension specimen. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

S, Piascik Robert, and Langley Research Center, eds. A back face strain compliance expression for the compact tension specimen. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

E, Melis Matthew, Halford Gary R, and United States. National Aeronautics and Space Administration., eds. Finite element elastic-plastic-creep and cyclic life analysis of a cowl lip. [Washington, D.C.]: National Aeronautics and Space Administration, 1990.

E, Melis Matthew, Halford Gary R, and United States. National Aeronautics and Space Administration., eds. Finite element elastic-plastic-creep and cyclic life analysis of a cowl lip. [Washington, D.C.]: National Aeronautics and Space Administration, 1990.

E, Melis Matthew, Halford Gary R, and United States. National Aeronautics and Space Administration., eds. Finite element elastic-plastic-creep and cyclic life analysis of a cowl lip. [Washington, D.C.]: National Aeronautics and Space Administration, 1990.

U-groove aluminum weld strength improvement. [Washington, D.C: National Aeronautics and Space Administration, 1995.

R, Vaughan, and United States. National Aeronautics and Space Administration., eds. U-groove aluminum weld strength improvement. [Washington, D.C: National Aeronautics and Space Administration, 1995.

R, Vaughan, and United States. National Aeronautics and Space Administration., eds. U-groove aluminum weld strength improvement. [Washington, D.C: National Aeronautics and Space Administration, 1997.

R, Vaughan, ed. U-groove aluminum weld strength improvement. [Washington, D.C.]: NASA, 1997.

U-groove aluminum weld strength improvement. [Washington, D.C: National Aeronautics and Space Administration, 1995.

R, Vaughan, and United States. National Aeronautics and Space Administration., eds. U-groove aluminum weld strength improvement. [Washington, D.C: National Aeronautics and Space Administration, 1995.

R, Vaughan, and United States. National Aeronautics and Space Administration., eds. U-groove aluminum weld strength improvement. [Washington, D.C: National Aeronautics and Space Administration, 1997.

R, Vaughan, and United States. National Aeronautics and Space Administration., eds. U-groove aluminum weld strength improvement. [Washington, D.C: National Aeronautics and Space Administration, 1997.

Modeling of stress/strain behavior of fiber-reinforced ceramic matrix composites including stress redistribution. [Washington, DC]: National Aeronautics and Space Administration, 1994.

Analysis of interface crack branching. [Washington, D.C.]: National Aeronautics and Space Administration, 1989.

Patrick, Dunn, and United States. National Aeronautics and Space Administration., eds. An evaluation of a coupled microstructural approach for the analysis of functionally graded composites via the finite-element method. [Washington, DC: National Aeronautics and Space Administration, 1995.

D, Roberts Gary, Gilat Amos, and NASA Glenn Research Center, eds. Implementation of an associative flow rule including hydrostatic stress effects into the high strain rate deformation analysis of polymer matrix composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2003.

United States. National Aeronautics and Space Administration., ed. The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy. [Washington, D.C: National Aeronautics and Space Administration, 1994.

United States. National Aeronautics and Space Administration., ed. The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy. [Washington, D.C: National Aeronautics and Space Administration, 1994.

G, Lance D., and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992.

G, Lance D., and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992.

Behavior of surface and corner cracks subjected to tensile and bending loads in Ti-6A1-4V alloy. Houston, Tex: National Aeronautics and Space Administration, Lyndon B. Johnson Space Center, 1990.

Y, Hwang Shoi, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., eds. Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Determination of yield in Inconel 718 for axial-torsional loading at temperatures up to 649⁰C. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

Property evaluation of LTM25 composite materials. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1996.

United States. National Aeronautics and Space Administration., ed. Creep and stress relaxaton modeling of polycrystalline ceramic fibers. [Washington, DC]: National Aeronautics and Space Administration, 1994.

(Editor), Jack Hu, Zdzislaw Marciniak (Editor), and John Duncan (Editor), eds. Mechanics of Sheet Metal Forming, Second Edition. 2nd ed. Butterworth-Heinemann, 2002.

L, Thompson Robert, and United States. National Aeronautics and Space Administration., eds. Improved finite strip Mindlin plate bending element using assumed shear strain distributions. [Washington, DC]: National Aeronautics and Space Administration, 1988.

Nolan, Brian, ed. Generating Prosperity for Working Families in Affluent Countries. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198807056.001.0001.