To see the other types of publications on this topic, follow the link: Storage projects.
Dissertations / Theses on the topic 'Storage projects'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Storage projects.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Brown, Christopher J. "Planning decision framework for brackish water aquifer, storage and recovery (ASR) projects." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0013031.
Full text
2
Coello, Behr Andres. "Energy Storage and Electric Motor Systems Projects for Hands-on Student Learning." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/84516.
Full textAbstract:
Advance Vehicle Technology Competitions (AVTCs) have been around for 30 years. Since 1994, the Hybrid Electric Vehicle Team (HEVT) at Virginia Tech has participated in AVTCs to pursue hybrid technologies. HEVT participated in a four-year AVTC called EcoCAR 3. At the beginning of the competition, HEVT introduced an ultra-rapid onboarding process, the Independent Study (IS) program, to involve non-seniors with the team. Although the IS program provides an incredible experience to non-seniors, it lacks hands-on experience related to the actual work students do once they become full-fledged team members. The challenge is to introduce two hands-on supplemental projects: the energy storage system (ESS) and the motor system. Each project is considered low voltage (LV) for safety and simplicity, however high voltage techniques are used for learning purposes. The LV ESS is used to power up an LV motor system. To limit depletion of the battery energy, another LV motor system is used as a generator to recharge the LV ESS. The lead faculty advisor, Dr. Douglas Nelson, and the project manager, Andres Coello, are working in congruence to introduce a smooth transition of the projects into HEVT's IS program. The hands-on projects are expected to last one semester. The goals are to guide students in the design, construction and testing of both systems. The hands-on supplemental projects are also meant to aid the Applied Automotive Engineering (AAE) curriculum by filling important knowledge gaps current AAE modules are missing.Master of Science
3
Mazzoldi, Alberto. "Leakage and atmospheric dispersion of CO2 associated with carbon capture and storage projects." Thesis, University of Nottingham, 2009. http://eprints.nottingham.ac.uk/11443/.
Full textAbstract:
Climate change is affecting planet Earth. The main cause is anthropogenic emissions of greenhouse gases, the principal one being carbon dioxide, released in the atmosphere as a by-product of the combustion of hydrocarbons for the generation of energy. Carbon capture and storage (CCS) is a technology that would prevent carbon dioxide from being emitted into the atmosphere by safely sequestering it underground. For so doing, CO2 must be captured at large emission points and transported at high pressure to underground reservoirs, where the gas can be injected and stored for thousands of years to come. During surface transportation, leakages from high pressure facilities would pose a risk to the general public, for carbon dioxide is toxic at high concentrations. In this study, atmospheric dispersion of carbon dioxide is studied by the usage of software that solves mathematical equations and algorithms simulating the pollutant dispersion. Dispersion models are used to estimate or predict downwind distances covered by toxic concentrations of the pollutant, emitted from sources such as high-pressure transportation facilities within CCS projects. Two modelling tools from two different classes (Gaussian ALOHA 5.4 and Computational Fluid Dynamics PANACHE 3.4.1) have been evaluated against release field experiments using the statistical model evaluation method proposed by Hanna et al. (1993,2004) and Hanna and Chang (2001), and applied for the consideration of the dense gas CO2, released in large amounts due to leakages. Predictions from the two models have been compared and the limitations of both examined, when dealing with a gas that presents the distinctive physical characteristics of carbon dioxide. The models have been used and compared in simulating representative failure cases within CCS transportation with release parameters taken from the literature. The Computational Fluid Dynamics (CFD) model showed a much higher precision when describing the release of the gas from a HP facility, mainly when dealing with the jet release caused by leakages of any dimensions. When dealing with the transportation of toxic gases, the magnitude of hazards posed by potential failure events within the transportation system is proportional to the extent of the area covered by toxic concentrations of the gas, when modelling representative leakages. Results of this investigation depict a lowering of the Risk involved in the transportation of CO2 by up to an order of magnitude, when modelling the same releases with CFD tools, instead of the more common Gaussian models. The European Union recognizes that deployment of CCS for hydrocarbon power generation, in parallel with the production of renewable energies, is the only way to meet the target for temperature stabilization. For its Impact Assessment on CCS, the EU used results from a risk assessment compiled after the utilization of a Gaussian model. In this thesis, a criticism of this choice is put forward, considering that, when introducing the technology to the general public and regional scale administrators, a Risk Assessment derived using results from Gaussian models can over-estimate the risk in a way not favourable to the purpose.
4
Sadri, Saeid Lonbani. "An Integrated information system for building construction projects." Diss., Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/19468.
Full text
5
MARCON, DIOGO REATO. "NUMERICAL MODELING OF THE CO2 INJECTION IN SALINE AQUIFERS: INVESTIGATION OF THE RELEVANT PARAMETERS FOR OPTIMIZING THE STORAGE IN CCS – CARBON CAPTURE AND STORAGE PROJECTS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2009. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=15354@1.
Full textAbstract:
Este trabalho apresenta uma análise da técnica de injeção de dióxido de
carbono em aqüíferos salinos para fins de descarte e armazenamento. O objetivo
foi obter as características do aqüífero a ser selecionado e do processo de injeção,
visando uma maior quantidade de CO2 estocada num menor tempo. Para tanto se
realizou uma revisão da literatura sobre os dados de laboratório disponíveis para o
CO2 e água salgada. Também se pesquisou sobre campos de CO2 que podem
servir como análogos ao método de armazenamento geológico deste gás, bem
como, se levantou condições consideradas adequadas para a técnica em questão e
sobre estudos de simulação numérica. A partir das informações obtidas na revisão
bibliográfica e após validação do modelo de fluidos aos dados de laboratório, se
definiu as variáveis do processo a serem analisadas e elaborou-se uma
metodologia para o estudo. O procedimento consistiu em estabelecer as premissas
para a simulação numérica do cenário-base e gerar os casos derivados. Assim foi
necessário alterar individualmente cada um dos seguintes parâmetros: salinidade,
profundidade, permeabilidade horizontal, relação entre as permeabilidades vertical
e horizontal, vazão de injeção, porosidade e saturação de água residual. Por fim,
se aplicaram os critérios, definidos na metodologia proposta, para comparar os
resultados das simulações e concluiu-se que as características mais importantes e
que possibilitaram, segundo as premissas adotadas, o armazenamento de uma
maior quantidade de CO2 em um menor intervalo de tempo são, em ordem
decrescente de importância: maior vazão de injeção, maior permeabilidade
horizontal e menor profundidade de injeção.This work shows an analysis of the technique of carbon dioxide injection into saline aquifers with the purpose of discharge and storage. The final goal was to obtain the features of the aquifer, and of the injection process, to be selected in order to make the amount of stored CO2 higher and the injection time smaller. Considering such objective it was initially done a bibliography revision about the available lab data of the CO2 and water properties. It was also surveyed information about the natural CO2 fields that can be applied as analogous into the geological storage of such gas, and it was surveyed important information about the conditions considered suitable to the technique highlighted here and about numerical simulation studies. Then, with all the information surveyed on the previous works and, after validation of the fluid model to the lab data, it was set the process variables to be analyzed and a methodology was built for the study. The procedure consisted in establishing the assumptions to be applied on the numerical simulation of the base case and in generating the derived scenarios. By that way, it was required a change in each of the following properties, individually: salinity, depth, horizontal permeability, relation between vertical and horizontal permeabilities, injection rate, porosity and residual water saturation. Finally, it was applied the criterion set with the proposed methodology in order to compare the simulation results and it was concluded that, following the adopted assumptions, the most important features which allowed the storage of a higher amount of CO2 and a lower injection time, were in a decreasing order: higher injection rate, higher horizontal permeability and lower depth for the injection.
6
Senjaya, Rudy. "Web-based library for student projects/theses and faculty research papers." CSUSB ScholarWorks, 2007. https://scholarworks.lib.csusb.edu/etd-project/47.
Full textAbstract:
The purpose of this project is to make available a Web-based Library, a web application developed for the Department of Computer Science at CSUSB to manage student projects/theses and faculty papers. The project is designed in accordance with Model-View-Controller (MVC) design pattern using the Jakarta Struts framework and iBATIS Data Mapper framework from Apache Software Foundation, JavaServer Pages (JSP), and MySQL database.
7
Michail, Nancy. "Importance of improved communication between stakeholders in information systems implementation projects." View thesis, 2006. http://handle.uws.edu.au:8081/1959.7/31558.
Full textAbstract:
Thesis (Ph.D.)--University of Western Sydney, 2006.A thesis presented to the University of Western Sydney, College of Business, School of Management, in partial fulfilment of the requirements for the degree of Master Commerce (Honours), Management. Includes bibliographies.
8
Gasparini, Andrea. "Experimental and numerical modelling of CO2 behaviour in the soil-atmosphere interface : implications far risk assessment of carbon capture storage projects." Doctoral thesis, Universitat Politècnica de Catalunya, 2021. http://hdl.handle.net/10803/672088.
Full textAbstract:
CO2 geological storage is considered one of the options technologically viable in order to decrease the industrial emissions of this gas species that strongly contribute to the greenhouse effect in the atmosphere (IPCC, 2005). As naturally, oil and gas are stored in porous rocks that have the same key geological features required for CO2 storage, so CCS aim to recreate a natural process to trap carbon dioxide for millions of years into deep saline aquifer or depleted oil and gas fields. Episodic release of CO2 from underground can occur from either natural processes (i.e., mantle degassing, thermal decarbonation, volcanic areas) or industrial (geological storage of CO2, CCS). Because of leakage can occur at every step of a CCS project, monitoring assumes an important role not only during and after injection but also before in order to know the state of the entire site from deep underground (reservoir level) to surface. In this respect, the use of atmospheric dispersion numerical models helps predicting the dispersion of the CO2-enriched gas plume once emitted from underground and allows an accurate map of risk level through time under particular meteorological conditions. The aim of this PhD. project is to give a better understanding of CO2 behaviour in the unsaturated zone and its atmospheric dispersion. The results are obtained from experimental and numerical modelling of CO2 leakage from an artificial leakage site and from natural analogues applied to risk assessment for CCS sites. To reach the above-mentioned targets and to prove results, this research plan combines experimental activity on site and numerical modelling. The first part of the research plan consisted of a contribution in the PISCO2 project at the ES.CO2 facilities placed in Ponferrada (Spain). The objective of this project was to predict how the injected CO2 will move laterally and vertically in the unsaturated zone and to determine the critical parameters that will affect the ecosystems. This part has been published in a peer review journal and presented in an international congress.
The second part of the PhD. project has focused on the study of two natural analogues in volcanic areas. Natural analogues provide evidences of the impact of CO2 leakage, for both sites two approaches have been followed: a) direct measurement of air concentration and b) numerical atmospheric modelling with the TWODEE2 code. The study of CO2 emissions in natural systems provides a valuable information on the assessment and quantification of potential risks related to underground carbon storage leakage. Emissions of CO2 are studied in a large variety of geological environments, i.e., sedimentary basins, active and non-active volcanic areas, seismically-active regions, and geothermal fields. Because of the physics of carbon dioxide gas, e.g., colourless, odourless, higher density compared to air, its accumulation may result hazardous and even lethal for life. The objective of atmospheric dispersion modelling is to predict how will move the plume, generated by a leakage in natural degassing systems and CCS sites.
Results obtained from this doctorate provide:
•Coupling experimental and numerical data in order to test new methods and/or numerical codes;
•New elements to the knowledge of CO2 behaviours in the unsaturated zone as seen at PISCO2;
•New clues on non-invasive monitoring techniques for CCS sites and natural analogues;
•The usefulness of studying natural analogues;
•The usefulness of the SAP system, as a good method to evaluate high gas emissions from underground;
•The efficiency of atmospheric modelling as a valuable methodology in the risk assessment;
•The importance of risk assessment maps in active degassing areas;
•The need of production of forecasting maps to evaluate dangerous scenarios.
•Numerical models (multiphase transport and atmospheric gas dispersion) are proved to be useful tools to predict gas behaviour inthe vadose zone and in the near-ground atmosphere.El almacenamiento geológico de CO2 se considera una de las opciones tecnológicamente viables para disminuir las emisiones industriales de esta especie de gas que contribuye fuertemente al efecto invernadero en la atmósfera (IPCC. 2005). Como es natural, el petróleo y el gas se almacenan en rocas porosas que tienen las mismas características geológicas clave requeridas para el almacenamiento de CO2. por lo que CCS tiene como objetivo recrear un proceso natural para atrapar dióxido de carbono durante millones de años en un acuífero salino profundo o en campos de petróleo y gas agotados. La liberación episódica de CO2 del subsuelo puede ocurrir por procesos naturales (es decir. desgasificación del manto, descarbonatación térmica. áreas volcánicas) o industriales (almacenamiento geológico de CO2. CCS). Debido a que las fugas pueden ocurrir en cada paso de un proyecto de CCS. el monitoreo asume un papel importante no solo durante y después de la inyección. sino también antes para conocer el estado de todo el sitio desde las profundidades del subsuelo (nivel del yacimiento) hasta la superficie. En este sentido. el uso de modelos numéricos de dispersión atmosférica ayuda a predecir la dispersión de la columna de gas enriquecido con CO2 una vez emitida desde el subsuelo y permite un mapa preciso del nivel de riesgo a lo largo del tiempo bajo condiciones meteorológicas particulares. El objetivo de este proyecto de doctorado consiste en dar una mejor comprensión del comportamiento del CO2 en la zona insaturada y su dispersión atmosférica. Los resultados se obtienen a partir de modelos experimentales y numéricos de fugas de CO2 de un sitio de fugas artificiales y de análogos naturales aplicados a la evaluación de riesgos para sitios de CCS. Para alcanzar los objetivos antes mencionados y probar los resultados. este plan de investigación combina la actividad experimental en el sitio y la modelización numérica. La primera parte del plan de investigación consistió en una aportación al proyecto PISCO2 en las instalaciones de ES.CO2 situadas en Ponferrada (España). El objetivo de este proyecto fue predecir cómo el CO2 inyectado se moverá lateralmente y verticalmente en la zona insaturada y determinar los parámetros críticos que afectarán los ecosistemas. Esta parte ha sido publicada en una revista de revisión por pares y presentada en un congreso internacional. La segunda parte del proyecto de doctorado se ha centrado en el estudio de dos análogos naturales en áreas volcánicas. Los análogos naturales proporcionan evidencias del impacto de la fuga de CO2. para ambos sitios se han seguido dos enfoques: a) medición directa de la concentración de aire y b) modelado atmosférico numérico con el código TW ODEE2. El estudio de las emisiones de CO2 en los sistemas naturales proporciona una valiosa información sobre la evaluación y cuantificación de los riesgos potenciales relacionados con las fugas de almacenamiento subterráneo de carbono. Las emisiones de CO2 se estudian en una gran variedad de entornos geológicos, es decir, cuencas sedimentarias, áreas volcánicas activas y no activas, regiones sísmicas y campos geotérmicos. Los resultados obtenidos de este doctorado aportan: • Acoplamiento de datos experimentales y numéricos para probar nuevos métodos y/o códigos numéricos; • Nuevos elementos para el conocimiento de los comportamientos del CO2 en la zona insaturada como se ve en PISCO2; • Nuevas pistas sobre técnicas de monitoreo no invasivas para sitios CCS y análogos naturales; • La utilidad de estudiar análogos naturales; • La utilidad del sistema SAP, como buen método para evaluar altas emisiones de gases subterráneos; • La eficiencia de la modelización atmosférica como metodología valiosa en la evaluación de riesgos ; • La importancia de los mapas de evaluación de riesgos en áreas de desgasificación activa; • La necesidad de producir mapas de predicción para evaluar escenarios peligrosos. • Se ha demostrado que los modelos numéricos (transporte multifásico y dispersión de gas atmosférico) son herramientas útiles para predecir el comportamiento de los gases en la zona vadosa y en la atmósfera cercana al suelo.
9
Girotto, Rogério Mendoza. "Caracterização de um modelo de armazenagem horizontal: estudo de caso." Universidade de São Paulo, 2007. http://www.teses.usp.br/teses/disponiveis/3/3135/tde-19072007-150849/.
Full textAbstract:
Este trabalho aborda o desenvolvimento e a implantação de um projeto de armazenagem de componentes direto numa indústria de linha branca, na cidade de Rio Claro, interior do estado de São Paulo, o qual migrou de um modelo de armazenagem vertical, em porta-paletes, para um modelo horizontal sem o uso deste equipamento, denominado como Flat Storage. A preocupação desta pesquisa foi de apresentar ao público acadêmico interessado e aos profissionais da área de logística, o cenário anterior ao projeto e os motivos que levaram ao desenvolvimento desse conceito de armazenagem, o COMO foi realizada a implantação, o cenário posterior, juntamente com os benefícios encontrados, fazendo-se uma comparação com o cenário anterior. Por fim, faz-se uma convergência do modo como o projeto foi desenvolvido e implantado com as recomendações encontradas no PMBOK, principalmente no que diz respeito aos aspectos das Áreas de Conhecimento de Gestão de Projeto, com o intuito de mostrar como este trabalho deveria ter sido desenvolvido. Primeiramente, concluiu-se que os responsáveis pelo projeto não seguiram qualquer \"metodologia\" de gestão de projetos, pois as dificuldades encontradas evidenciaram tal descuido. Concluiu-se, também, que o modelo de armazenagem implantado, apesar de ser totalmente diferente daqueles encontrados em livros e na prática, foi muito bem aceito sob vários aspectos no cenário estudado.This paper approaches the development and the implantation of a storage project of components (parts) in an industry named \"white line\" in Rio Claro city, located in São Paulo State, Brazil, which migrated from a vertical storage model, to a horizontal model, without any equipment, being called as Flat Storage. The concern of this research is presenting to the public in general, specially academics and logistics professionals, the previous scenario to the project and the reasons that had led it to the development of this storage concept, HOW the implantation was carried through, the previous scenario aligned with the benefits met, by making a comparison with the previous scene. Finally, a convergence is made of the way the project was developed and implanted in accordance with the recommendations found in the PMBOK guide, mainly under the aspects which are based on the areas of Knowledge of Project Management, bearing in mind to show how this project must have been developed. The first conclusion was that the responsible person for the project had difficulties due to the fact that the Project Management \"methodology\" was not followed. Therefore, the difficulties encountered pointed to incautious evidences. We also concluded that the storage model implanted, although very much alike the trends found in books and in practical in use, was very well accepted under some aspects in the studied scene.
10
LaMay, Mary Louise. "Memory for common and bizarre imagery: A storage-retrieval analysis." CSUSB ScholarWorks, 1996. https://scholarworks.lib.csusb.edu/etd-project/1465.
Full text
11
Anderson, Darcy J., and Darcy J. Anderson. "Central Avra Valley storage and recovery project geochemical modeling study." Thesis, The University of Arizona, 2000. http://hdl.handle.net/10150/626879.
Full textAbstract:
The chemical and isotopic characteristics of the groundwater in A vra Valley,
Arizona, were investigated, and existing hydrologic information was compiled to
determine processes affecting groundwater chemistry in this area. The characteristics
of Central Arizona Project (CAP) water, the surface water source for recharge
operations in the Central Avra Valley Storage and Recovery Project (CAVSARP), were
investigated for comparison. The changes that occurred over time in the chemistry of
the groundwater were evaluated with respect to vadose zone processes and mixing with
CAP water during recharge operations. Two major vadose zone processes were
identified: flushing of perched water remaining from historical agricultural irrigation,
and cation exchange as recharged CAP water infiltrated through clay layers at the site.
Geochemical modeling using PHREEQC was conducted for groundwater, CAP
water and mixtures of the two waters to determine processes that could affect recharge
rates and the chemical composition of groundwater that will be recovered for delivery
to customers. The results of the modeling were used to infer the likelihood that mineral
precipitation and ion exchange occurred during the study period of January 1998 to
December 1999. Based on the modeling results, significant mineral precipitation and
subsequent decreases in recharge rates seems unlikely. Cation exchange processes will
continue to alter the chemical composition of the CAP water between the recharge basin
and its arrival at the water table.
12
Dahle, Torstein Jørgensen. "Study on the development of pumped storage hydropower project at Snåsa." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for vann- og miljøteknikk, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-25889.
Full textAbstract:
An increasing power demand and a transition towards more renewable energy sources have led to an increasing development of wind farms. Wind farms produce unregulated power which may not be available when it is needed. Pumped storage power plants can have a stabilizing effect of the power grid as well as increase the utilization of the wind power by using surplus power to store water and produce power from this water when needed.The two lakes Ytter-Bangsjøen and Snåsavatnet is suited for a pumped storage power plant. With the construction of a 1 km low dam the magazine capacity is increased to 260 mill m3 and a head of 296.8 m. The water tunnels that’s need constructing will have a total length of 6.5 km which because of good rock quality and topography can be unlined. A review of the topographic and geological conditions was done for the area, and the underground elements was located and orientated on basis of these findings in the area. The headrace and tailrace tunnel was optimized towards an economical optimum, based on net present value and given values for the power price.The selected tunnel profile and the power cavern were simulated with the finite element software Phase2 to investigate the stability of the openings. Results showed that only a 70 m stretch of limestone needs support.The construction costs was calculated using NVE cost base for hydropower plants and gave a cost of 1122 mill NOK. For calculating profitability a series of sale power prices was set, and for each value a corresponding maximum buy price that gave a positive NPV was found. The result gave an equation that found the price variation in the power market to be too small for the project to be profitable from operating solely on the power market, and should rely on buying surplus wind power.
13
Takashima, Yoshifumi, Takashi Yamane, Yoshikazu Takeda, Kazuo Soda, Shinya Yagi, Tsunehiro Takeuchi, Koichi Akimoto, et al. "Nagoya University Photo-Science Nanofactory Project." American Institite of Physics, 2007. http://hdl.handle.net/2237/11989.
Full text
14
McFarland, Sean Alan. "Decision making theory with geographic information systems support." CSUSB ScholarWorks, 2008. https://scholarworks.lib.csusb.edu/etd-project/3393.
Full textAbstract:
Decisions are made with varying degrees of effectiveness and efficiency and are influenced by a myriad of internal and external forces. Decision Support Systems (DSS) software can effectively aid decision making through processing the facts and producing meaningful outputs for use by the person or team in making the final choice. Geographic Information Systems (GIS), a form of DSS, are very effective when locational data are present. This thesis talks about using GIS software in decision making procedures.
15
Guillen, Jonathan Michael. "Least Privilege Separation Kernel storage hierarchy prototype for the trusted computing exemplar project." Thesis, Monterey, California : Naval Postgraduate School, 2010. http://edocs.nps.edu/npspubs/scholarly/theses/2010/Jun/10Jun%5FGuillen.pdf.
Full textAbstract:
Thesis (M.S. in Computer Science)--Naval Postgraduate School, June 2010.Thesis Advisor(s): Irvine, Cynthia E. ; Clark, Paul C. "June 2010." Description based on title screen as viewed on July 14, 2010. Author(s) subject terms: Trustworthy systems, separation kernels, secondary storage, storage hierarchy Includes bibliographical references (p. 143-144). Also available in print.
16
Zhu, Ni M. Eng Massachusetts Institute of Technology. "Geochemical modeling of an aquifer storage and recovery project in Union County, Arkansas." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/82830.
Full textAbstract:
Thesis (M. Eng.)--Massachusetts Institute of Technology, Department of Civil and Environmental Engineering, 2013.Cataloged from PDF version of thesis.
Includes bibliographical references (pages 70-76).
The Sparta aquifer in Union County, Arkansas has served as an important potable water supply to the public and industrial sectors in the area. However, increasing water demand and sustained heavy pumping from the aquifer has resulted in the formation of major cones of depression in the area. Union County has been declared as one of the five "critical groundwater areas" in Arkansas due to rapid water level declines, salt water intrusion and overall withdrawals exceeding the rate of natural recharge. To mitigate the adverse impacts of a depleted aquifer, Aquifer Storage and Recovery (ASR) by well injection at the center of the cone of depression is evaluated to address the issue. ASR is the injection of potable water into an aquifer for storage and recovery for use when needed. One important aspect in successful design and operation of ASR systems is to assess the potential geochemical reactions between the injected water and the local aquifer water, which are typically of very distinctive compositions and environmental conditions. The goal of this paper is to use the geochemical modeling software PHREEQC to simulate the scenario of injecting partially treated surface water from Ouachita River into the Sparta aquifer at the city of El Dorado. Key reactions modeled include the initial mixing of the two waters in the proximal zone, surface exchange reactions of the major cations, iron precipitation/ dissolution reactions and the oxidizing potential of the injection water. Results from the modeling indicate that reducing the oxygen content of the injection water to enhance geochemical compatibility with the anoxic aquifer water would be beneficial. Arsenic dissolution or attenuation could occur depending on the mixing ratio of injection water to groundwater. Oxidation of ferrous ions is modeled to illustrate the oxidizing potential of the mixed water in the aquifer and the potential of iron precipitation is assessed.
by Ni Zhu.
M.Eng.
17
Hošek, David. "Zavedení doménové struktury v rozsáhlé firmě." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2017. http://www.nusl.cz/ntk/nusl-316934.
Full textAbstract:
This master`s thesis deals with domain structure. The main concern of this work is analysis and implementation of the Domain Structure in a company. Domain structure will be introduced because of the current unsatisfactory solutions and increase information security. The name of the company is not specified in this thesis.
18
Chang, Andrew Yee. "A web accessible clinical patient information networked system." CSUSB ScholarWorks, 2006. https://scholarworks.lib.csusb.edu/etd-project/2980.
Full textAbstract:
Developed with the intention to make the patient data storage system in the clinical outpatient area more efficient, this system stores all pertinent and relevant patient data such as lab results, patient history and X-ray images. The system is accessible via the internet as well as operable over a local area network (LAN). The intended audience for this program is essentially the clinical staff (e.g., physicians, nursing staff, secretarial staff). The computer program was developed using Java Server Pages (JSP) and utilizes the Oracle 9i database.
19
St, Germain Gary. "MusLib: A proposed database for the management of a music library." CSUSB ScholarWorks, 1990. https://scholarworks.lib.csusb.edu/etd-project/566.
Full text
20
Lin, Chungping. "The RMT (Recursive multi-threaded) tool: A computer aided software engineeering tool for monitoring and predicting software development progress." CSUSB ScholarWorks, 1998. https://scholarworks.lib.csusb.edu/etd-project/1787.
Full text
21
Webster, Eleanor Jane. "How will projected sea-level rise affect carbon storage in floodplain fens?" Thesis, Queen Mary, University of London, 2017. http://qmro.qmul.ac.uk/xmlui/handle/123456789/24871.
Full textAbstract:
Floodplain fens represent an important component of the global carbon cycle through their role in carbon sequestration. Peat development depends upon rate of production exceeding rate of decomposition, yet there is little understanding of the effects of sea-level rise on these processes in lowland environments. This thesis investigates the impacts of projected sea-level rise from climate change on carbon storage in floodplain fens, using a combination of field, laboratory and simulation modelling techniques. A gradient of saline influence was determined for the Broads, UK, based on analysis of water chemistry and published water level data, allowing for the application of a space-for-time substitution technique. Increased water level had a positive effect on above-ground production of Phragmites australis (cav.) Trin. Ex Steud. (1841) - perhaps because water stress limits important photosynthetic processes. An increase in salinity had a negative effect on the growth of P. australis, probably due in part to osmotic stress. Previous management practice significantly impacted on production - as uncut vegetation became less productive with time. There was evidence to suggest that sea-level rise may lead to faster decay rates, but this will be partially offset by litter quality. Saline influenced sites had lower carbon accumulation potentials. Radiometric dating confirmed that these sites have lower carbon sequestration rates - probably as a result of increased mineral deposition in floodwaters. Carbon stock ranged between 33 and 144 kt C but depended greatly on peat depth and bulk density. Results from both field data and the model indicated that peat accretion in the Broads would not offset projected sea-level rise. Floodplain fen development under the influence of sea-level rise will be dependent on the majority of assimilate being allocated to above-ground vegetation.
22
Sukhija, Ruchi. "Document imaging application." CSUSB ScholarWorks, 2007. https://scholarworks.lib.csusb.edu/etd-project/3217.
Full textAbstract:
The purpose of this project was to develop a document imaging application. By scanning the documents into an electronic repository, medical staff will be able to more easily store and locate these records. To make the application user friendly and facilitate staff access to patient medical records, the application is wed-based and uses the Oracle Application Server to implement a multitiered model.
23
Dou, Jie. "Evaluating Microsoft .NET technology: Implementation online store." CSUSB ScholarWorks, 2006. https://scholarworks.lib.csusb.edu/etd-project/3060.
Full textAbstract:
The purpose of this project is to design, develop and implement an e-commerce shopping cart system based on Microsoft.NET technology and to evaluate ASP.NET technology by developing a shopping cart system.
24
Yang, Yin-Wei. "Online multimedia communication system." CSUSB ScholarWorks, 2005. https://scholarworks.lib.csusb.edu/etd-project/2661.
Full textAbstract:
Online Multimedia Communication System is a project aimed at providing people the ability to store and share their multimedia files. The users and administrator can modify and view the files and database information from a normal web browser. Furthermore, this site offers a secure environment to keep all the users' information private.
25
Cowton, Laurence Robert. "Monitoring sub-surface storage of carbon dioxide." Thesis, University of Cambridge, 2017. https://www.repository.cam.ac.uk/handle/1810/270308.
Full textAbstract:
Since 1996, super-critical CO$_2$ has been injected at a rate of $\sim$0.85~Mt~yr$^{-1}$ into a pristine, saline aquifer at the Sleipner carbon capture and storage project. A suite of time-lapse, three-dimensional seismic reflection surveys have been acquired over the injection site. This suite includes a pre-injection survey acquired in 1994 and seven post-injection surveys acquired between 1999 and 2010. Nine consistently bright reflections within the reservoir, mapped on all post-injection surveys, are interpreted to be thin layers of CO$_2$ trapped beneath mudstone horizons. The areal extents of these CO$_2$ layers are observed to either increase or remain constant with time. However, volume flux of CO$_2$ into these layers has proven difficult to measure accurately. In addition, the complex planform of the shallowest layer, Layer 9, has proven challenging to explain using reservoir simulations. In this dissertation, the spatial distribution of CO$_2$ in Layer~9 is measured in three dimensions using a combination of seismic reflection amplitudes and changes in two-way travel time between time-lapse seismic reflection surveys. The CO$_2$ volume in this layer is shown to be growing at an increasing rate through time. To investigate CO$_2$ flow within Layer~9, a numerical gravity current model that accounts for topographic gradients is developed. This vertically-integrated model is computationally efficient, allowing it to be inverted to find reservoir properties that minimise differences between measured and modelled CO$_2$ distributions. The best-fitting reservoir permeability agrees with measured values from nearby wells. Rapid northward migration of CO$_2$ in Layer~9 is explained by a high permeability channel, inferred from spectral decomposition of the seismic reflection surveys. This numerical model is found to be capable of forecasting CO$_2$ flow by comparing models calibrated on early seismic reflection surveys to observed CO$_2$ distributions from later surveys. Numerical and analytical models are then used to assess the effect of the proximity of an impermeable base on the flow of a buoyant fluid, motivated by the variable thickness of the uppermost reservoir. Spatial gradients in the confinement of the reservoir are found to direct the flow of CO$_2$ when the current is of comparable thickness to the reservoir. Finally, CO$_2$ volume in the second shallowest layer, Layer~8, is measured using structural analysis and numerical modelling. CO$_2$ in Layer~8 is estimated to have reached the spill point of its structural trap by 2010. CO$_2$ flux into the upper two layers is now $\sim$40\% of total CO$_2$ flux injected at the base of the reservoir, and is increasing with time. This estimate is supported by observations of decreasing areal growth rate of the lower layers. The uppermost layers are therefore expected to contribute significantly to the total reservoir storage capacity in the future. CO$_2$ flow within Layer~9 beyond 2010 is forecast to be predominantly directed towards a topographic dome located $\sim$3~km north of the injection point. This dissertation shows that advances in determining the spatial distribution and flow of CO$_2$ in the sub-surface can be made by a combination of careful seismic interpretation and numerical flow modelling.
26
Yang, Hongping. "Wiki message linking." CSUSB ScholarWorks, 2005. https://scholarworks.lib.csusb.edu/etd-project/2907.
Full textAbstract:
Wiki Message Linking (WML) is a group communication tool that will be used between group members and the group leader. By using WML, group web pages are created and modified easily. From the WML, new pages are created and owned by their creators. The group leader and the page owner can modify the page, and the owner may give permission for other people to modify the web page; member can edit their works online and the leader can review the works and correct the works directly from the WML.
27
Han, Kwon Soo. "Surveygen: A web-based survey editor." CSUSB ScholarWorks, 1998. https://scholarworks.lib.csusb.edu/etd-project/1786.
Full text
28
Abdel-Jaber, Fadi Fayez. "Design and implementation of car rental system." CSUSB ScholarWorks, 2001. https://scholarworks.lib.csusb.edu/etd-project/1836.
Full textAbstract:
When someone wants to rent a car, the customer will usually think twice about the company from which they want to rent. The decision will be based on factors such as good rates, quality and customer service. The service the company representative offers the client should be fast, clear and accurate. This goal cannot be achieved without an informative system that will enable the customer representative to answer the various questions the client might have.
29
Saffou, Eric. "Geomechanical characterization and reservoir Simulation of a carbon storage project in e-m depleted Gas field in South Africa." University of the Western Cape, 2020. http://hdl.handle.net/11394/8218.
Full textAbstract:
Philosophiae Doctor - PhDGeomechanical analysis and integrity assessment of hydrocarbon reservoirs upon depletion and injection are crucial to ensure that CO2 storage projects can be safely implemented. The Bredasdorp Basin in South Africa has great potential for CO2 storage, given its hugely available exploration data. However, there has not been any geomechanical characterization carried out on this basin to determine its integrity issues. This study aims to investigate the feasibility of a carbon storage project in the E-M depleted gas field. The preliminary geological assessment demonstrates that Zone 2 and Zone 3 display acceptable injectivity for CO2 injection of the E-M gas field. Seismic lines display faults that could affect the caprock's integrity during depletion and carbon storage. Geomechanical characterization provides a guideline as to how geomechanical analysis of depleted fields can be done for a safe CO2 sequestration practice. The geomechanical model constructed at a depth of 2570 m indicated that the magnitudes of the principal vertical, minimum, and maximum horizontal stresses in the field are respectively 57 MPa, 41 MPa, and 42-46 MPa. Fault and fracture stabilities were examined before and after depletion. It was found that faults and fractures in compartments C1 and C2 of the reservoir are stable before and after depletion, while normal faults (FNS8 and FNS9) in compartment C3 dipping SW were critically stressed. The minimum sustainable pressure of the reservoir determined by simulating depletion is 6 MPa. Below that, pressure depletion causes normal faulting in reservoir compartments C1 and C2. The maximum sustainable pressure, on the other hand, was found to be 25 MPa. The geomechanical studies also reveal that it is possible that the reservoir experienced compaction of 8 cm during depletion and will experience an uplift of 3.2 cm during 71 years of injection. The economic model of a CO2-enhanced gas recovery project in E-M gas field, the annual expenses (Aexp) of carbon capture and storage range between Zar20 3.31 × 109 and Zar20 4.10 × 109. The annual revenues (RA) were estimated to be Zar20 1.42 × 1010. The cash flow analysis derived from Aexp and RA confirms that enhanced gas recovery could partially offset the cost of CO2 storage if a minimum of 5 % of CO2 fraction is allowed in the natural gas recovered. Geological and geomechanical studies have demonstrated that carbon storage is physically feasible in the E-M gas field. However, the project's completion lies in the among the gas recovered to balance the cost of CO2. http://
30
Moller, Austin. "Documenting archival automation systems : guidelines for the project manager." PDXScholar, 1985. https://pdxscholar.library.pdx.edu/open_access_etds/3552.
Full textAbstract:
With the onset of the information age, archivists are more frequently placed in professional situations where they must work with automated systems to manage the records in their custody. They must acquire new skills to use this technology, including system analysis, system planning, and the principles of computer operation. An area that is frequently neglected, however, is that of developing and maintaining in-house project documentation for systems once equipment is in place and implementation has begun. This oversight leads to poor training strategies, inconsistencies in input and output, and information loss when personnel changes occur.
Project documentation is the group of records that describe the system the archivist creates. It is a communications tool, developed by the project manager as a reference document for administrative and operations purposes, and to train users.
The documentation guidelines assembled in this text were developed by the author while implementing automated systems over a six-year period. They are arranged in five groups. SCOPE discusses ways to introduce the user to the project, the equipment, and to the concept of the project manual. SYSTEM ORIENTATION contains strategies for more detailed instruction on the equipment. INPUT shows how to describe the data base design and instruct the user on entering data. OUTPUT provides a format for profiling and generating reports. And OPERATIONS AND MAINTENANCE outlines the tools the project manager needs to maintain the system.
31
Lukalapu, Sushma. "Billing and receivables database application." CSUSB ScholarWorks, 2000. https://scholarworks.lib.csusb.edu/etd-project/1618.
Full textAbstract:
The purpose of this project is to design, build, and implement an information retrieval database system for the Accounting Department at CSUSB. The database will focus on the financial details of the student accounts maintained by the accounting personnel. It offers detailed information pertinent to tuition, parking, housing, boarding, etc.
32
Jones, Diane R. "Effects of Emotion on Memory Formation and Storage." Miami University Honors Theses / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=muhonors1114108504.
Full text
33
Song, Shanpeng. "A book management system eLibrary." CSUSB ScholarWorks, 2004. https://scholarworks.lib.csusb.edu/etd-project/31.
Full textAbstract:
"eLibrary" is a book management software application that runs on Microsoft Windows platforms. The software incorporates a Windows Explorer like interface and XML/XSL to display book details. The purpose of this project is to build a full-featured, commerical-quality software package to help people manage their books (either printed or electronic). The goal is for eLibrary to be a complete solution for people who wish to build their own personal electronic library catalog.
34
Goetz, Randy Ray. "A Post-Project Assessment of the Provo River Restoration Project: Channel Design, Reconfiguration, and the Re-Establishment of Critical Physical Processes." DigitalCommons@USU, 2008. https://digitalcommons.usu.edu/etd/45.
Full textAbstract:
A physical assessment of the Provo River Restoration Project was undertaken in order to determine how alterations to the channel were designed, the nature of as-built channel morphology, and the performance of the reconfigured channel in terms of achieving frequent (2-year recurrence) bankfull discharge and increasing transient storage. Measures of channelized and reconfigured channel morphology were obtained using total station survey, digital aerial photography, and pebble counts. Results of geomorphic analysis were compared with similar measurements made by a regional consulting company, and stream channel design data, in order to determine that intended mitigation included reducing channel capacity, increasing sinuosity, decreasing pool spacing, and decreasing the size of bed material. Reconfiguration of the channel resulted in somewhat enlarged cross-sections with reduced mean velocities, increased sinuosity, decreased pool spacing, and decreased bed substrate size. One-dimensional hydraulic modeling suggests that alterations to channel morphology have increased the bankfull channel capacity in most reaches. Modeling results illustrate the fact that the stage of the 2-year recurrence flood is below bankfull at most cross-sections. This result does not follow the intentions of channel design. However, we have observed floodplain inundation in most years since reconfiguration. The occurrence floodplain inundation is being facilitated by overbank flow at a few point locations illustrating the strengths of incorporating variability into design. Known geomorphic controls on transient storage were reconfigured in manner to potentially increase in-channel and hyporheic components of transient storage. Stream tracer tests were utilized in order to determine the degree to which these alterations affected transient storage. Numerical analysis of stream tracer tests suggests that while the relative area of transient storage increased, average residence time of water in storage, and the mass transfer rate of solute between storage and the stream did not change. This suggests that an extensive hyporheic zone may not have been established. Correlations between hydrologic and geomorphic parameters indicate that in-stream storage may have been increased, and quick-exchange hyporheic flowpaths may have been created. (295 pages)
35
Castillo, Keith Anthony. "Relational database for the Master of Arts in Education Instructional Technology Program." CSUSB ScholarWorks, 2003. https://scholarworks.lib.csusb.edu/etd-project/2189.
Full textAbstract:
This project was created to develop a database for students and teachers to allow accurate, efficient and reliable tracking of student's academic information. The database was designed specifically for faculty and students within the Master of Arts in Education, Instructional Technology Program at California State University, San Bernardino.
36
Židek, Michal. "Využití klíčenky Gnome v projektu FreeIPA." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2016. http://www.nusl.cz/ntk/nusl-255298.
Full textAbstract:
This master's thesis gives introduction to FreeIPA project and GNOME Keyring project. It discusses benefits of possible integration of GNOME Keyring into FreeIPA using FreeIPA's component called Password Vault. Designs of possible implementations are provided. Prototype of one of these designs is implemented.
37
Moravcová, Lucie. "Warehouse Change Project." Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-72844.
Full textAbstract:
At the turn of the years 2009 and 2010 the structure of supply chain of the company operating in the Czech and Slovak republic has changed through Warehouse Change Project. The goal of this diploma thesis is to evaluate changes caused by this project in term of mathematical modeling and multi-criterial decision making; eventually, propose appropriate changes in the logistic system.
38
Boampong, James Kwadwo. "Solar thermal heating of a glasshouse using phase change material (PCM) thermal storage techniques." Thesis, Brunel University, 2015. http://bura.brunel.ac.uk/handle/2438/12863.
Full textAbstract:
The Royal Botanic Gardens (RGB) is used as an umbrella name for the institution that runs Kew and Wakehurst Place gardens in Sussex The RBG has a large number of glasshouses at Kew and Wakehurst sites that consume lots of heating energy which is a major concern and the group is looking for an alternative heating system that will be more efficient and sustainable to save energy, cost and reduce CO2 emissions. Glasshouse due to greenhouse effect trap solar energy in the space with the slightest solar gains but the energy trapped in the space most often is vented through the roof wasted to keep the space temperature to the required level. An environmental measurement was carried out in twenty one zones of the glasshouse to establish the temperature and humidity profiles in the zones for at least three weeks. The investigation established that large amount of heat energy is vented to the atmosphere wasted and therefore need a heating system that could absorb and store the waste thermal energy. Phase change material (PCM) thermal energy storage technique was selected to be the best options compared to the others. It has been established that active and passive solar systems could provide enough thermal energy to meet the glasshouse heating requirements. PCM filled heating pipes will be installed to absorb the heat energy trapped in the glasshouse and use it when needed. The research analysis established that 204 MWh of the trapped energy wasted could be saved. The space temperature of the glasshouse could be maintained through melting and freezing of the PCM filled in the heating pipes. The site CHP waste heat could be useful. The research results have shown that nearly zero CO2 emission heating system could be achieved and the project is technically, economically and environmentally viable.
39
Patel, Avani Rajnikant. "Cognitive Rehab Solutions: A computer-assisted cognitive training program." CSUSB ScholarWorks, 2002. https://scholarworks.lib.csusb.edu/etd-project/2321.
Full textAbstract:
The purpose of this project is to offer a functionally comprehensive application, Cognitive Rehab Solutions (CRS), that is designed for neuropsychologists to deliver restorative cognitive training in areas of attention and memory of persons with brain impairment.
40
Costa, Elizabeth Regina Halfeld da. "Avaliação do funcionamento de uma instalação de filtração direta descendente com taxa declinante variável em escala real e piloto." Universidade de São Paulo, 2001. http://www.teses.usp.br/teses/disponiveis/18/18138/tde-27012017-164044/.
Full textAbstract:
Um sistema de filtração rápida com taxa declinante variável devidamente projetado e operado pode funcionar como uma alternativa econômica e prática uma vez que este tipo de sistema dispensa equipamentos de controle de vazão e de nível, diminuindo o custo da obra e simplificando a operação. Várias são as formas encontradas por pesquisadores para o estudo de sistemas, mas a grande maioria os pesquisou em escala piloto; alguns modelaram a hidráulica do sistema tentando obter parâmetros de projeto, outros utilizaram métodos gráficos que permitem visualizar o que acontece teoricamente nesses sistemas, mas poucos são os trabalhos desenvolvidos em escala real. O sistema de filtração com taxa declinante variável, na realidade, é bastante simples, mas, na maior parte das vezes, uma implantação inadequada pode dificultar a operação e por consequência tornar o processo complexo e pouco eficiente. Este trabalho consistiu em desenvolver uma metodologia de trabalho que permite estudar esses sistemas em escala real por meio de simulações numa instalação piloto com características similares à de instalação em escala real com o intuito de se obterem as condições mais adequadas de operação do sistema. O trabalho ressalta as dificuldades encontradas numa instalação com filtração direta descendente e taxa declinante variável em escala real, quando seu funcionamento ocorre sem uma operação prévia, na qual os equipamentos e o sistema deveriam ter sido devidamente ajustados.O desenvolvimento desse trabalho resultou em uma metodologia que permite obter parâmetros de projeto de um sistema com taxa declinante variável a partir de uma instalação piloto constituída de um único filtro, levando-se em conta a área de armazenamento a montante dos filtros.A variable declining rate filtration system, designed and operated with care, can be an economical and practical alternative for water treatment as this type of system requires no control equipment for discharge and head. There are various ways to study such systems but most of them employed pilot scale tests; some either modelled the hydraulic of the system mathematically trying to obtain project parameters; others made use of graphical methods to visualise what occurs within these systems. Very few studies have been conducted at full scale. Although declining rate filtration systems are rather simple, their inadequate implantation can pose difficulties in operation, thus making the process complex and less efficient. This work consisted of developing a methodology of investigation that permits the study of full scale rate filtration systems by means of simulations in a pilot installation with the same characteristics as the real system, in order to determine the most adequate operational conditions. This research reveals the difficulties associated with the study of an actual direct down flow and a variable declining rate filtration system, when it functions without a previous experimental operation in which the system and its equipment are adequately adjusted. The development of this work has led to a methodology that allows for obtaining project parameters of a declining variable rate system by means of a pilot installation comprising one single filter, talking into account the storage upstream the filters.
41
Karstens, Jens [Verfasser]. "Focused fluid conduits in the Southern Viking Graben and their implications for the Sleipner CO2 storage project / Jens Karstens." Kiel : Universitätsbibliothek Kiel, 2015. http://d-nb.info/1072410192/34.
Full text
42
Garza, Jesus Mario Torres. "Entertainics." CSUSB ScholarWorks, 2003. https://scholarworks.lib.csusb.edu/etd-project/39.
Full textAbstract:
Entertainics is a web-based software application used to gather information about DVD players from several web-sites on the internet. The purpose of this software is to help users search for DVD players in a faster and easier way, by avoiding the navigation on every web-site that contains this product.
43
Wagner, Pamela Jean, and Christal June Quam. "Electronic access to academic records by Department of Children's Services social workers." CSUSB ScholarWorks, 2003. https://scholarworks.lib.csusb.edu/etd-project/2184.
Full textAbstract:
The purpose of this study was to examine whether or not DCS social workers would obtain client's educational records if they had electronic access to these records. If a social worker could access client school records quickly and easily and then enter the information into the case management computer system, the school history would travel with the client to their new environment. This information would insure that the foster child with special education needs was placed in the proper classroom, giving the child a better chance to succeed.
44
Alemu, Getahun. "White Board." CSUSB ScholarWorks, 2003. https://scholarworks.lib.csusb.edu/etd-project/2195.
Full text
45
Elrufaie, Elharith Omer. "A Wiki paradigm to manage online course content." CSUSB ScholarWorks, 2004. https://scholarworks.lib.csusb.edu/etd-project/2446.
Full textAbstract:
This project develops a new version of the Wiki style administration of online course content. It will implement a teaching and learning tool that works as a easy and quick communication interface between instructor and student. The second purpose of the project is to design an easily extendable and maintainable architecture, which provides a generic Wiki system that can work for any information technology department and handle sets of courses and insturctors.
46
Kanai, Rieko. "Case study: Applied Digital Solutions I3 services platform." CSUSB ScholarWorks, 2001. https://scholarworks.lib.csusb.edu/etd-project/1734.
Full textAbstract:
The purpose of this project is to analyze whether i3 Strategy of Applied Digital Solutions (ADS) was necessary to meet the fast-moving IT industry. i3 Services Strategy is an integrated corporate strategy to reengineer the organizational structure of ADS.
47
Liu, Chaomei. "Traditional Chinese medical clinic system." CSUSB ScholarWorks, 2004. https://scholarworks.lib.csusb.edu/etd-project/2517.
Full textAbstract:
The Chinese Medical Clinic System is designed to help acupuncturists and assistants record and store information. This system can maintain and schedule appointments and view patient diagnoses effectively. The system will be implemented on a desktop PC connected to the internet to facilitate the acupuncturists record of information.
48
Alvares, Bedoya Jose Enrique, Machari Pedro Junior Churampi, Aranguez Michael Jeanpierre García, Camac Alberto Toro, and Robles Wendy Diana Velarde. "Kamari Regalos." Bachelor's thesis, Universidad Peruana de Ciencias Aplicadas (UPC), 2020. http://hdl.handle.net/10757/652933.
Full textAbstract:
El presente trabajo ha sido elaborado bajo la identificación de una problemática que enfrentan en su día a día muchas personas, a quienes en adelante se llamará público objetivo. La propuesta de este trabajo es ofrecer al mercado un sitio web donde ellos puedan encontrar paquetes de regalos, los cuales contengan un mix de productos que se adapte a los gustos y preferencias de la persona a quien piensan dirigir el regalo. Se considero los paquetes de regalos pues en la actualidad en el mercado de regalos y/o obsequios los usuarios suelen buscar un mix de productos en un solo lugar pues esto reduce el tiempo de búsqueda de un regalo en tiendas independientes y lo más importante, produce un ahorro en sus bolsillos. Ese fue el motivo por el cual se consideró un mercado atractivo que aún puede mejorar ofreciendo alternativas de compra llamativas que se adapten a los gustos de los interesados. Es por ello que nació Kamari, una tienda de regalos online en la cual se puede elegir entre una serie de distintos paquetes a regalar dependiendo de la ocasión e incluso cambiar ciertos productos del paquete seleccionado, haciéndolo personalizable para el cliente. Cabe mencionar que para corroborar la viabilidad de este proyecto el equipo de trabajo ha elaborado experimentos para la validación del proyecto a pesar de la situación actual que se vive a nivel mundial, logrando como resultado un proyecto viable.This work has been prepared under the identification of a problem that many people face in their day-to-day life, who from now on will be called the target audience. The proposal of this work is to offer the market a website where they can find gift packages, which contain a mix of products that adapts to the tastes and preferences of the person to whom they plan to direct the gift. Gift packages were considered as currently in the market for gifts and / or gifts, users often look for a mix of products in one place as this reduces the time of searching for a gift in independent stores and most importantly, produces a savings in customer´s pockets. That was the reason why it was considered an attractive market that can still improve by offering eye-catching purchasing alternatives that suit the tastes of those interested. That is why Kamari was born, an online gift store where you can choose between a series of different packages to give away depending on the occasion and even change certain products from the selected package, making it customizable for the client. It is worth mentioning that to corroborate the viability of this project, the work team has carried out experiments for the validation of the project despite the current situation worldwide, achieving as a result a viable project.
Trabajo de investigación
49
Ling, Meng-Chun. "Senior health care system." CSUSB ScholarWorks, 2005. https://scholarworks.lib.csusb.edu/etd-project/2785.
Full textAbstract:
Senior Health Care System (SHCS) is created for users to enter participants' conditions and store information in a central database. When users are ready for quarterly assessments the system generates a simple summary that can be reviewed, modified, and saved as part of the summary assessments, which are required by Federal and California law.
50
Demirel, Türkan. "Tragil - Projektstyrningsmodell med hjälp av hybridmetod : Tragil för stora organisationer som bedriver stora eller komplexa IT -projekt." Thesis, Mittuniversitetet, Avdelningen för data- och systemvetenskap, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-27740.
Full textAbstract:
De agila projektmetoderna har använts i stor utsträckning under de senaste åren som ett sätt att motverka svagheterna med traditionella metoder. Men studierna visar att införandet av varken agila - eller traditionella metoder är effektiva i stora organisationer när det gäller stora och komplexa IT-projekt. Stödet för integrering av agila- och traditionella projektmetoder fortsätter därför att växa inom den akademiska litteraturen. Det finns för lite forskningar som beskriver hur en hybridmetod ska införas i stora och komplexa IT-projekt. Denna rapport tar fram en detaljerad projektstyrningsmodell som kommer att integrera den traditionella och agila metoden med hjälp av hybridmetoden. Rapporten beskriver även roller och möten behövs. Det används ett stort urval av vetenskaplig litteratur för att förstärka den detaljerade projektstyrningsmodellen. Den kvalitativa metoden används och intervjuer görs med respondenter från två stora organisationer; en myndighet och ett konsultbolag. Sammanlagt tretton personer intervjuas med roller som projektledare, scrummaster och produktägare. Resultatet av denna studie är ett förslag på en detaljerad tragil projektstyrningsmodell med roller och möten som behövs för att kunna uppnå en högre andel lyckosamma IT-projekt. Den tragila projektstyrningsmodellen kan användas av stora organisationer som bedriver stora eller komplexa IT-projekt. Slutsatsen är att organisationerna kan anpassa projektstyrningsmodellen efter behovet eftersom varje organisation och IT-projekt kan vara unikt.