Relevant bibliographies by topics / STIR CASTING METHOD

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'STIR CASTING METHOD'

Author: Grafiati
Published: 11 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'STIR CASTING METHOD.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "STIR CASTING METHOD"

1

Arulra, M., P. K. Palani, and L. Venkatesh. "Optimization of Process Parameters in Stir Casting of Hybrid Metal Matrix (LM25/SiC/B4C) Composite Using Taguchi Method." JOURNAL OF ADVANCES IN CHEMISTRY 13, no. 11 (March 29, 2017): 6038–42. http://dx.doi.org/10.24297/jac.v13i11.5774.

Full text
Abstract:
Aluminium based composites exhibit many attractive material properties such as increased stiffness, wear resistance, specific strength and vibration damping and decreased co-efficient of thermal expansion compared with the conventional aluminium alloys. Aluminium Matrix Composites consist of non-metallic reinforcement which offers advantageous properties over base material. Reinforcements like SiC, B4C and Al2O3 are normally preferred to improve the mechanical properties. Here Aluminum LM25 is selected as matrix material while Silicon carbide and Boron carbide are selected as reinforcement material. The fabrication of aluminium matrix was done by stir casting method. In the present study an attempt has been made to investigate the effect of three major stir casting parameters (stir speed, stir duration and preheated temperature of reinforcement material) on stir casting of Aluminium LM25 - SiC - B4C composite. Experiments were conducted based on Taguchi methodology. Taguchi quality design concepts of L9 orthogonal array has been used to determine S/N ratio and through S/N ratio a set of optimum stir casting parameters were obtained. The experimental results confirmed the validity of Taguchi method for enhancing tensile strength of castings.
APA, Harvard, Vancouver, ISO, and other styles
2

Arulraj, M., P. K. Palani, and L. Venkatesh. "Optimization of Process Parameters in Stir Casting of Hybrid Metal Matrix (LM25/SiC/B4C) Composite Using Taguchi Method." JOURNAL OF ADVANCES IN CHEMISTRY 13, no. 9 (February 22, 2017): 6475–79. http://dx.doi.org/10.24297/jac.v13i9.5777.

Full text
Abstract:
Aluminium based composites exhibit many attractive material properties such as increased stiffness, wear resistance, specific strength and vibration damping and decreased co-efficient of thermal expansion compared with the conventional aluminium alloys. Aluminium Matrix Composites consist of non-metallic reinforcement which offers advantageous properties over base material. Reinforcements like SiC, B4C and Al2O3 are normally preferred to improve the mechanical properties. Here Aluminum LM25 is selected as matrix material while Silicon carbide and Boron carbide are selected as reinforcement material. The fabrication of aluminium matrix was done by stir casting method. In the present study an attempt has been made to investigate the effect of three major stir casting parameters (stir speed, stir duration and preheated temperature of reinforcement material) on stir casting of Aluminium LM25 - SiC - B4C composite. Experiments were conducted based on Taguchi methodology. Taguchi quality design concepts of L9 orthogonal array has been used to determine S/N ratio and through S/N ratio a set of optimum stir casting parameters were obtained. The experimental results confirmed the validity of Taguchi method for enhancing tensile strength of castings.
APA, Harvard, Vancouver, ISO, and other styles
3

Asokan, Manivannan, Sasikumar Rathinasabapathy, Shaik Dawood Abdul Khadar, and Mohammed Sadique Khan. "Novel Combined Feeding Approach to Produce Quality Al6061 Composites for Heat Sinks." High Temperature Materials and Processes 38, no. 2019 (February 25, 2019): 647–50. http://dx.doi.org/10.1515/htmp-2019-0009.

Full text
Abstract:
AbstractThis elementary work aims to address agglomeration and non-uniform dispersion of reinforcement particles in stir casting using Al6061 alloy (AA 6061) as a matrix and Aluminium oxide (Al2O3) as reinforcement particles. A novel combined feeding method of Encapsulate feeding technique & Two Step Stir Casting was developed & attempted to produce good quality composites by varying weight fractions of Aluminium Oxide (0 to 5 wt.%). The wetting agent Mg (2 wt.%) added in all castings to ensure better binding between ceramics and matrix. The SEM photomicrograph ensures homogenous dispersion of reinforcement particles by combined feeding method. The thermal properties of produced good quality composites are enhanced with increase in Aluminium Oxide (Al2O3) from 0 to 5 wt.%.
APA, Harvard, Vancouver, ISO, and other styles
4

Jayakumar, E., Jibin C. Jacob, T. P. D. Rajan, M. A. Joseph, and B. C. Pai. "Processing and Characterization of Hypoeutectic Functionally Graded Aluminum – SiC Metal Matrix Composites." Materials Science Forum 830-831 (September 2015): 456–59. http://dx.doi.org/10.4028/www.scientific.net/msf.830-831.456.

Full text
Abstract:
The present study describes the processing and characterization of hypoeutectic A319 functionally graded Aluminium metal matrix composite (FGMMC) reinforced with 10 weight percentage SiCp particles of 23 μm size. FGMMC’s are processed by liquid stir casting method followed by vertical centrifugal casting. Metallographic analysis of FGMMC casting reveals the influence of the centrifugal force on the gradation of various phases in the matrix and an increasing gradient distribution of SiC reinforcements gradually from inner towards the outer periphery forming different zones. Tensile and the compressive tests show that the variation in properties are structure sensitive and is confirmed by the dry wear tests. The study clearly depicts the gradient nature in the structure and mechanical properties of the FGM castings produced by centrifugal casting method.
APA, Harvard, Vancouver, ISO, and other styles
5

Ashok Kumar, R., and T. S. Krishnakumar. "Casting and characterization of Al6063/SiC nano composites produced using stir casting method." Materials Today: Proceedings 5, no. 11 (2018): 23853–62. http://dx.doi.org/10.1016/j.matpr.2018.10.177.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Verma, Rahul, and Rohit Srivastava. "Development of WC-Feal Composite by Stir Casting Method." International Journal of Engineering and Management Research 9, no. 2 (April 10, 2019): 33–38. http://dx.doi.org/10.31033/ijemr.9.2.5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Naikar, Ravi C. "Charecterization of Al-Redmud Composite using Stir Casting method." International Journal for Research in Applied Science and Engineering Technology V, no. XI (November 6, 2017): 104–8. http://dx.doi.org/10.22214/ijraset.2017.11015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bisht, Jeevan Singh, Akshay Dvivedi, and Apurbba Kumar Sharma. "Fabrication and Characterization of MMCs Using Stir Casting Method." i-manager's Journal on Mechanical Engineering 4, no. 3 (July 15, 2014): 27–32. http://dx.doi.org/10.26634/jme.4.3.2728.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hashim, J., L. Looney, and M. S. J. Hashmi. "Metal matrix composites: production by the stir casting method." Journal of Materials Processing Technology 92-93 (August 1999): 1–7. http://dx.doi.org/10.1016/s0924-0136(99)00118-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ezhil, S. Shenbaga, A. Shanmuganathan, Ganganagunta Srinivas, K. Ashokkumar, Sultan Althahban, S. Mousa, Faez Qahtani, Yosef Jazaa, and Nagaraj Ashok. "Optimization on Tribological Characteristics of Stir-Casted AA7076/Nano Zirconium Dioxide/Boron Nitride Hybrid Composites by Taguchi Method." Journal of Nanomaterials 2022 (July 18, 2022): 1–11. http://dx.doi.org/10.1155/2022/5706132.

Full text
Abstract:
Aluminum alloys are currently used in a wide variety of industries, and strong aluminum alloys are required for the creation of new components. As a result, multiple scientists are experimenting with various compositions of hybrid aluminum metal matrix composites. The purpose of this experiment was to generate hybridization on aluminum alloy 7076 using stir-casting and nano zirconium dioxide and BN reinforcements. Taguchi’s approach was used to optimize the stir-casting process criteria in this investigation. The parameters employed in this investigation were agitation speed, agitation time, and temperature. The chosen constraints are the percentage of reinforcement (0–12%), the agitation speed, the agitation time, and the molten state temperature. We used a wear tester and a Vickers hardness tester to determine the wear and microhardness of the produced stir casting materials. By optimizing wear parameters, the least wear rate is determined.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "STIR CASTING METHOD"

1

Anandatheerthan, J., and Sudipt Kumar. "Production and Characterisation of Aluminium-Fly ash composite using Stir Casting Method." Thesis, 2008. http://ethesis.nitrkl.ac.in/131/1/10404002.pdf.

Full text
Abstract:
Metal matrix composites (MMCs) possess significantly improved properties including high specific strength; specific modulus, damping capacity and good wear resistance compared to unreinforced alloys. There has been an increasing interest in composites containing low density and low cost reinforcements. Among various discontinuous dispersoids used, fly ash is one of the most inexpensive and low density reinforcement available in large quantities as solid waste by-product during combustion of coal in thermal power plants. Hence, composites with fly ash as reinforcement are likely to over come the cost barrier for wide spread applications in automotive and small engine applications. It is therefore expected that the incorporation of fly ash particles in aluminium alloy will promote yet another use of this low-cost waste by-product and, at the same time, has the potential for conserving energy intensive aluminium and thereby, reducing the cost of aluminium products. Now a days the particulate reinforced aluminium matrix composite are gaining importance because of their low cost with advantages like isotropic properties and the possibility of secondary processing facilitating fabrication of secondary components. The present investigation has been focused on the utilization of abundantly available industrial waste fly-ash in useful manner by dispersing it into aluminium to produce composites by stir casting method.
APA, Harvard, Vancouver, ISO, and other styles
2

Sarangi, Subhakanta. "Fabrication and Characterization of Aluminum-Fly Ash Composite Using Stir Casting Method." Thesis, 2009. http://ethesis.nitrkl.ac.in/185/1/project-subhakanta.pdf.

Full text
Abstract:
Metal matrix composites (MMCs) possess significantly improved properties including high specific strength; specific modulus, damping capacity and good wear resistance compared to unreinforced alloys. There has been an increasing interest in composites containing low density and low cost reinforcements. Among various discontinuous dispersoids used, fly ash is one of the most inexpensive and low density reinforcement available in large quantities as solid waste by-product during combustion of coal in thermal power plants. Hence, composites with fly ash as reinforcement are likely to over come the cost barrier for wide spread applications in automotive and small engine applications. It is therefore expected that the incorporation of fly ash particles in aluminium alloy will promote yet another use of this low-cost waste by-product and, at the same time, has the potential for conserving energy intensive aluminium and thereby, reducing the cost of aluminium products. Now a days the particulate reinforced aluminium matrix composite are gaining importance because of their low cost with advantages like isotropic properties and the possibility of secondary processing facilitating fabrication of secondary components. The present investigation has been focused on the utilization of abundantly available industrial waste fly-ash in useful manner by dispersing it into aluminium to produce composites by stir casting method.
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar, Deepak. "Fabrication and Characterization of Al-fly Ash Composite using Stir Casting Method." Thesis, 2009. http://ethesis.nitrkl.ac.in/179/1/project-deepak.pdf.

Full text
Abstract:
Metal matrix composites (MMCs) possess significantly improved properties including high specific strength; specific modulus, damping capacity and good wear resistance compared to unreinforced alloys. There has been an increasing interest in composites containing low density and low cost reinforcements. Among various discontinuous dispersoids used, fly ash is one of the most inexpensive and low density reinforcement available in large quantities as solid waste by-product during combustion of coal in thermal power plants. Hence, composites with fly ash as reinforcement are likely to over come the cost barrier for wide spread applications in automotive and small engine applications. It is therefore expected that the incorporation of fly ash particles in aluminium alloy will promote yet another use of this low-cost waste by-product and, at the same time, has the potential for conserving energy intensive aluminium and thereby, reducing the cost of aluminium products. Now a days the particulate reinforced aluminium matrix composite are gaining importance because of their low cost with advantages like isotropic properties and the possibility of secondary processing facilitating fabrication of secondary components. The present investigation has been focused on the utilization of abundantly available industrial waste fly-ash in useful manner by dispersing it into aluminium to produce composites by stir casting method.
APA, Harvard, Vancouver, ISO, and other styles
4

Ray, Nigamananda, and Dilip Kumar Kerketta. "Some studies on aluminium matrix in-situ composites produced by stir casting method." Thesis, 2010. http://ethesis.nitrkl.ac.in/1845/1/nigam%26dilip.pdf.

Full text
Abstract:
During the last two decades, metal matrix composites (MMCs) have emerged as an important class of materials for structural, wear, thermal, transportation and electrical applications. Metal matrix composites (MMCs) possess significantly improved properties including high specific strength; specific modulus, damping capacity and good wear resistance compared to unreinforced alloys. There are several techniques to produce composites, such as liquid state, solid state and semi solid state production route. Among the entire liquid state production route stir casting route are simplest and cheapest. The aim of our project is to produce a composite with cheap and simple production route i.e. stir casting method. We have chosen low grade iron ore as the reinforcement material and commercially pure aluminium as matrix phase. For the fabrication of in-situ composite wettability of the iron ore particles by liquid Al is essential. To improve wettability, Mg is added into Al melt .After fabrication; composites have been characterized for their morphology, mechanical and wear properties to see their suitability as a wear resistance material. Wear test was performed as a function of sliding distance, applied load, sliding velocity with the help of Pin-On-Disc wear test machine. The worn surfaces were analyzed using scanning electron microscope. The mechanical properties such as hardness have been investigated.
APA, Harvard, Vancouver, ISO, and other styles
5

KHAN, FAIM. "ANALYSIS OF TRIBOLOGICAL PROPERTIES OF ALUMINIUM METAL MATRIX COMPOSITE FABRICATED BY STIR CASTING METHOD." Thesis, 2019. http://dspace.dtu.ac.in:8080/jspui/handle/repository/16669.

Full text
Abstract:
The composite material has been fabricated using mechanical stir casting method. For which Al6063 alloy was selected as a metal matrix and yttrium oxide (Y2O3) in 25 micrometer as a reinforcement powder and three sample of casting were made. One as casted, second with 2% reinforcement by (weight), and third with 4% reinforcement by (weight). The die used was of mild steel. And the parameter selected for this fabrication are melting temperature of alloy 900°C, melting time of alloy 90 min. stir rpm 200, stir time 15 min. preheating of reinforcement for 30 min. at 300°C in muffle furnace and then wear test and Micro-Hardness test were performed. Wear test was performed at three different load (20 N. 40 N, 60 N) first at 1 m/s sliding velocity and then at 2 m/s sliding velocity in the specimens (pin) of all three casting sample at a fix sliding distance of 2000 m. The time taken for wear test was 33.33 min. at 1 m/s sliding velocity and 16.66 min. at 2 m/s sliding velocity. Wear test was performed in dry condition at room temperature. The material of disc used for wear test is EN24 steel with hardness value of 58HRC. The result obtained of wear test shows that the casting sample with 4% yttrium oxide (Y2O3) at 1 m/s sliding velocity has good wear resistance and low wear rate and less weight loss in (gm.) after wear at all three load (20 N, 40 N, 60 N). and the result of Micro-Hardness test shows that the casting sample with 4% yttrium oxide (Y2O3) has more hardness value compare to as casted sample and sample with 2% yttrium oxide. For inspection of microstructure optical microscopy techniques was used.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "STIR CASTING METHOD"

1

Srinu, Devara, K. Srinivasarao, and N. R. M. R. Bharagava. "Fabrication of Al/Al-Co Composites by Stir Casting Method." In Lecture Notes in Mechanical Engineering, 291–98. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4571-7_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ranjan, Rajeev, and Abhay Ranjan Kumar Singh. "Al MMC Reinforced with Al2O3 and CU Prepared by Stir-Casting Method." In Innovation in Materials Science and Engineering, 219–24. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-2944-9_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kurbet, Ramesh, Basavaraj, C. M. Amruth, and S. L. N. Jayasimha. "Effect of Ceramic Particles on AMMC Through Stir Casting Method—A Review." In Advances in Sustainability Science and Technology, 373–88. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-4321-7_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Arunkumar, T., K. Aditya Sreevatsa, Dinesh R. Krishnan, and Ram Subbiah. "Corrosion Behaviour of Aluminium 6061/MWCNT Composite Prepared by Double Stir Casting Method." In Lecture Notes in Mechanical Engineering, 293–99. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0909-1_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Khan, Faim, N. Yuvaraj, Lakshay Tyagi, Luckshaya Kem, and Ravi Butola. "Analysis of Tribological Properties of Aluminum Metal Matrix Composite Fabricated by Stir Casting Method." In Modern Manufacturing Systems, 203–14. New York: Apple Academic Press, 2022. http://dx.doi.org/10.1201/9781003284024-17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kothari, Anil, Hemant Jain, Vikas Shrivastava, Richa Thakur, Pankaj Agarwal, and Sanjay Jain. "Microstructure, Mechanical and Corrosion Behaviour of Cu-SiC Composites Fabricated by Stir Casting Method." In Manufacturing and Industrial Engineering, 93–102. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003088073-6-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Vasava, A. S., and D. Singh. "A Review on the Manufacturing of Aluminum Metal Matrix Composite by Various Stir Casting Method." In Lecture Notes in Mechanical Engineering, 341–49. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-3033-0_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gosangi, Narasa Raju, and Lingaraju Dumpala. "Effect of NFA on Wear Resistance of Al6063/NFA Composites fabricated through the Stir Casting Method." In Lecture Notes in Mechanical Engineering, 281–86. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7282-8_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sekar, K., and P. Vasanthakumar. "Friction Stir Welding of Al–Cu Alloy Metal Matrix Composites Reinforced with B4C and Graphite Particle Fabricated by Stir Casting and Thixoforming Method." In Lecture Notes on Multidisciplinary Industrial Engineering, 507–19. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9433-2_44.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Naik, M. Peeru, and K. T. Balaram Padal. "Microstructure and Mechanical Properties of Rapid Solidified Hypereutectic AlSi24Cu3.8Mg0.8 Alloys by UV-Assisted Stir–Squeeze Casting Method Under T-6 Condition." In Advances in Materials and Mechanical Engineering, 267–77. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0673-1_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "STIR CASTING METHOD"

1

Palampalle, Bhanu Prakash, K. Brahmaraju, and K. Venkata Subbaiah. "Development and Characterization of Al-GNPs Composites by Stir Casting Method." In International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2018. http://dx.doi.org/10.4271/2018-28-0096.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sricharan, S. Sasanka, and Dipesh Popli. "Mechanical Characterization of Copper and Aluminum Composites Preparation by Frequency Stir Casting Method." In 2022 5th International Conference on Contemporary Computing and Informatics (IC3I). IEEE, 2022. http://dx.doi.org/10.1109/ic3i56241.2022.10073402.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Puspitasari, Poppy, Muhammad Ilman Nur Sasongko, Sukarni, Putut Murdanto, and Wahono. "Mechanical properties of Al-Si alloy with nanoreinforced manganese oxide by stir casting method." In INTERNATIONAL CONFERENCE ON BIOLOGY AND APPLIED SCIENCE (ICOBAS). AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5115679.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Alexander, Benny, and Anne Zulfia Syahrial. "The effect of nano Alumina on characteristics of AC4B composite through stir casting method." In 2ND INTERNATIONAL CONFERENCE ON ADVANCED INFORMATION SCIENTIFIC DEVELOPMENT (ICAISD) 2021: Innovating Scientific Learning for Deep Communication. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0138016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shyn, C. S., R. Rajesh, and M. Dev Anand. "Review of aluminium 6061 metal matrix composites fabricated using stir casting method and applications." In PROCEEDINGS OF THE 14TH ASIA-PACIFIC PHYSICS CONFERENCE. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0036169.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

T, Thirugnanasambandham, Chandradass J, P. Baskara Sethupathi, and Leenus Jesu Martin. "Fabrication and Mechanical Properties of Alumina Nanoparticle Reinforced Magnesium Metal Matrix Composite by Stir Casting Method." In International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2018. http://dx.doi.org/10.4271/2018-28-0098.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ramesh, B. T., R. P. Swamy, and Koppad Vinayak. "Mechanical characterization of Al-2024 reinforced with fly ash and E-glass by stir casting method." In ADVANCES IN MECHANICAL DESIGN, MATERIALS AND MANUFACTURE: Proceedings of the First International Conference on Design, Materials and Manufacture (ICDEM 2018). Author(s), 2018. http://dx.doi.org/10.1063/1.5029677.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kosaraju, Satyanarayana, Venu Gopal Anne, and Swapnil Gosavi. "Development of Hybrid Composites (Al-SiC-C) Through Stir Casting: Machinability Studies." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2659.

Full text
Abstract:
Composite materials are important engineering materials due to their outstanding mechanical properties. Composite materials offer superior properties to conventional alloys for various applications as they have high stiffness, strength and wear resistance. The high cost and difficulty of processing these composites restricted their application and led to the development of reinforced composites. In the last two decades, wear studies on Particulate Metal Matrix Composites (PMMCs) reinforced with various reinforcements ranging from very soft materials like graphite, talc etc., to high hardened ceramic particulates like SiCp, Al2O3 etc., have been reported to be superior to their respective unreinforced alloys. Therefore, present work focused on the study of machinability of Al based binary composites reinforced with 8.5% SiC and Al based Hybrid composite reinforced with 8.5% SiC, 2% and 4% Graphite powder (Solid lubricant) have been studied by considering the effect of process parameters such as speed, feed, depth of cut and composition of material. Binary and hybrid composite materials have been casted by stir casting methodology. Experiments have been conducted using Design of Experiments approach to reduce the number of experiments and time. The cutting force and surface roughness in turning of both the binary and hybrid materials have been measured using cutting force dynamometer (4 component kistler dynamometer) and the roughness has been measured using surface roughness tester (Marsurf M400) simultaneously. The multi objective optimization has been carried out using Grey relational based Taguchi method. It was observed that feed was the most influencing factor compared to others factors and also results shown that the performance characteristics cutting force and the surface roughness are greatly enhanced by using Grey relational Analysis.
APA, Harvard, Vancouver, ISO, and other styles
9

Emmanual, L., L. Ragunath, and T. Karthikeyan. "Wear behaviour on composite of aluminium 6063 alloy with silicon carbide and granite by stir casting method." In INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND MACHINING 2019. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5117940.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Thangavel, Thirugnana Sambandham, Chandradass Jeyaseelan, Baskara Sethupathi Paramathma, and Kannan Mahadevan. "Experimental Investigation of Silicon Carbide Nanoparticles Reinforced Magnesium Alloy (AZ91E) Metal Matrix Composite by Vacuum Stir Casting Method." In International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2019. http://dx.doi.org/10.4271/2019-28-0169.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "STIR CASTING METHOD"

1

Mahendran, Subramanian, and Rajamani Jeyapaul. Preparation of Aluminium Calcium Oxide Composite Material Using Stir Casting Method and Testing of Its Mechanical Properties. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, October 2018. http://dx.doi.org/10.7546/crabs.2018.10.13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'STIR CASTING METHOD' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography