Dissertations / Theses on the topic 'Standardization of finished products'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Standardization of finished products.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Кічура, Марія Андріївна. "Технологія виробництва бактеріального концентрату закваски для кисломолочних продуктів. Дільниця виробничого біосинтезу." Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/41082.
Full textThe diploma project contains 108pages, 10 illustrations, 3 tables, 2 drawings and 109 bibliographic titles according to the list of references. The purpose of this work is to design the production of bacterial leaven for the manufacture of fermented milk products for dietary nutrition. The work is devoted to increasing the production of domestic leavens, which will increase the range and reduce the cost of lactic acid products. It is substantiated and proposed to use strains of homofermentative thermophilic lactic acid bacteria Lactobacillus delbrueckii subsp as a producer of bacterial yeast. Vulgaricus and Streptococcus salivarius subsp. Thermophilus, obtained by selection using natural selection, have probiotic properties and are high-tech for the manufacture of fermented milk production. Efficient, cost-effective and reliable equipment for production cultivation of sourdough has been selected. The device for industrial cultivation is calculated and selected. Technological, constructive and hydraulic calculations of the selected fermenter are given. The technological and hardware schemes of production are substantiated and presented in the work
Wray, Jenet. "Next generation polyurethanes for enhanced durability pre-finished architectural steel products." Thesis, Swansea University, 2008. https://cronfa.swan.ac.uk/Record/cronfa42649.
Full textGraf, Marcel, Andre Hälsig, Kevin Höfer, Birgit Awiszus, and Peter Mayr. "Thermo-Mechanical Modelling of Wire-Arc Additive Manufacturing (WAAM) of Semi-Finished Products." MDPI AG, 2018. https://monarch.qucosa.de/id/qucosa%3A33161.
Full textIMERI, DODONA. "The Standardization Vs. Customization Debate Continues for PCI DSS Compliant Products." Thesis, KTH, Industriell Management, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-190963.
Full textБондар, О. І. "Організація обліку і аналізу виробництва та реалізації готової продукції." Master's thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/71396.
Full textThe study of the essence of the concept of "finished products". The General economic and organizational characteristics of the enterprise are given. Features of the organization of accounting of production and realization of finished goods are considered and the analysis of process of production and realization of finished goods is carried out. The main purpose of this study is to study the theoretical and practical aspects of the organization of accounting and analysis of production and sales of finished products and the development of possible ways to improve it.
Kohl, Martina. "Social networks as glocal products: The case of Facebook." Master's thesis, NSBE - UNL, 2013. http://hdl.handle.net/10362/9815.
Full textThe appropriateness of following a globally standardized or locally adapted strategy in global marketing has been subject of an on-going debate for several decades. However, little research exists of how to follow standardization and adaptation (s/a) simultaneously and to take advantage of both strategies, in brief how to follow a GloCal approach. Thus, the purpose of this case study is to generate theoretical insights of how to follow a GloCal strategy, based on the case of Facebook. After reviewing critical points of current knowledge in the field of s/a, qualitative research via open-ended in-depth interviews from a sample of Facebook users from 16 different countries was conducted. The outcome supports that common needs and individual usage behavior of Facebook users favor a strategy that is simultaneously standardized and adapted, within different aspects of the product element. Results are presented narratively intertwined with theory and prior study results. Findings reveal that Facebook is following a GloCal approach. By abstracting from the case of Facebook to a general level theoretical insights are gained of how to follow s/a simultaneously. This work contributes to existing theory, since it is a starting point to close the research gap of how to follow s/a simultaneously in international marketing. Additionally, it exhibits the significance and importance of the GloCal approach. Regarding practitioners this work provides guidance on how to create synergies, while considering differences within their international marketing strategies.
Zilker, Markus [Verfasser], and Ulrike [Gutachter] Holzgrabe. "The stability of finished pharmaceutical products and drug substances beyond their labeled expiry dates / Markus Zilker ; Gutachter: Ulrike Holzgrabe." Würzburg : Universität Würzburg, 2019. http://d-nb.info/1187140406/34.
Full textOkiror, Julius. "The impact of standardization (public and industry) on product innovation, market access and foreign trade: with specific reference to South Africa." Thesis, University of the Western Cape, 2007. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_8574_1190368756.
Full textProduct innovation and its efficient diffusion are important to enhance factor productivity, market access, job creation and trade. Innovative firms remain competitive in an increasingly global environment. Product innovation add maximum economic value when the new knowledge and technical know-how are spread through the economy. Standardisation of products is regarded as a vital tool to enable the diffusion of product innovations. The economic rationale for standardisation is based on the theory market failure that requires some sort of correction. Standardisation is regarded as a public good, a form of technical infrastructure. It reduces transaction costs and information asymmetries
increased the willingness of consumers to pay, which in turn increases the success and diffusion of innovation. Lower transaction costs result in reduced production and distribution costs. For consumers it also results in reduced search and testing costs as well as reduced time and effort to evaluate quality. Studies on the impact of standardisation were done for some developed countries, but not for developing countries. Unlike most studies that have a narrow industry-focus, this report has a broader focus on the impact of various types of standards on product innovation, market access and trade. It presented specific case studies for various industries in South Africa as well as studies on the impact of standards internationally.
Cuellar-Valer, Stephanie, Angie Gongora-Vilca, Ernesto Altamirano-Flores, and Daniel Aderhold. "Application of lean manufacturing in a peruvian clothing company to reduce the amount of non-conforming products." Springer, 2021. http://hdl.handle.net/10757/655941.
Full textКротюк, Д. О. "Облік та контроль готової продукції: теорія та практика у ТОВ «Телекарт-Прилад»." Thesis, Одеський національний економічний університет, 2021. http://local.lib/diploma/Krotyuk.pdf.
Full textУ роботі розглядаються теоретичні аспекти обліку, аналізу та контролю готової продукції. Досліджено економічну сутність, види та оцінку готової продукції. Здійснено аналіз основних показників діяльності на базовому підприємства. Досліджено нормативно-правову базу з обліку готової продукції, основні методичні прийоми здійснення внутрішнього контролю. Розкрито проблемні питання обліку готової продукції на підприємствах. Запропоновано напрями удосконалення обліку і системи внутрішнього контролю у ТОВ «Телекарт-Прилад» зокрема, запровадити на підприємстві складання звітності за міжнародними стандартами. Використовувати 26 рахунок для достовірного відображення руху готової продукції на підприємстві. Застосувати окремі субрахунки для обліку відхилень фактичної собівартості від облікових цін. Створити автоматизовану систему внутрішнього контролю.
Bachelor's qualification work consists of three sections. The object of research - the processes that ensure the effectiveness of accounting, analysis and control of finished products. Diploma thesis deals with theoretical aspects of accounting, analysis and control of finished products. The economic essence, types and evaluation of finished products are studied. The analysis of the basic indicators of activity at the basic enterprise is carried out. The normative-legal base on the account of finished products, the basic methodical receptions of realization of internal control is investigated. Problematic issues of accounting for finished products at enterprises are revealed. The directions of improvement of the account and system of internal control in LLC «Telecard-Prilad» are offered, in particular, to introduce at the enterprise of drawing up of the reporting according to the international standards. Use 26 accounts to accurately reflect the movement of finished products in the enterprise. Apply separate sub-accounts to account for deviations of actual cost from accounting prices. Create an automated internal control system.
Santhanakrishnan, Balakrishnan Venkateswaran [Verfasser], Herwig [Gutachter] Winkler, Holger [Gutachter] Seidlitz, and Sabine [Gutachter] Weiß. "Near-net-shape semi-finished products for the local reinforcement and repair of fibre reinforced plastics / Venkateswaran Santhanakrishnan Balakrishnan ; Gutachter: Herwig Winkler, Holger Seidlitz, Sabine Weiß." Cottbus : BTU Cottbus - Senftenberg, 2020. http://d-nb.info/1219908436/34.
Full textЗалога, Вільям Олександрович, Вильям Александрович Залога, Viliam Oleksandrovych Zaloha, and А. В. Вісленко. "Дослідження вимог нормативних документів щодо процедури декларування електротехнічної продукції в рамках Митного союзу та Європейського співтовариства." Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/40091.
Full textGreß, Thomas Manfred [Verfasser], Wolfram [Akademischer Betreuer] Volk, Wolfram [Gutachter] Volk, and Babette [Gutachter] Tonn. "Vertical Continuous Compound Casting of Copper Aluminium Semi-Finished Products : Design of a Resource-Efficient Production Technology for the Formation of Metallurgically Bonded Bilayer Parts / Thomas Manfred Greß ; Gutachter: Wolfram Volk, Babette Tonn ; Betreuer: Wolfram Volk." München : Universitätsbibliothek der TU München, 2021. http://d-nb.info/1240384084/34.
Full textТарасенко, О. О., Олександр Володимирович Івченко, Александр Владимирович Ивченко, and Oleksandr Volodymyrovych Ivchenko. "Методи оцінювання ризику загальної безпеки продукції." Thesis, Сумський державний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/39467.
Full textAmbrožová, Helena. "Studie optimalizace plánování zásobovacích procesů se zaměřením na zásoby hotových výrobků." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2012. http://www.nusl.cz/ntk/nusl-223748.
Full textWeidermann, Frank, Stefanie Zimmermann, and Andrea Pino. "Konstruktion eines Inserts für Faserverbund- Halbzeuge." Thelem Universitätsverlag & Buchhandlung GmbH & Co. KG, 2021. https://tud.qucosa.de/id/qucosa%3A75902.
Full textГоловіна, Оксана Миколаївна. "Проєкт підприємства з виробництва шкір для швейних виробів з козлини потужністю 80 млн кв. дм за рік." Магістерська робота, Київський національний університет технологій та дизайну, 2021. https://er.knutd.edu.ua/handle/123456789/19269.
Full textThe master's thesis project is devoted to the issue of designing a leather enterprise for the production of leather for garments. The project substantiates the choice of raw materials, production methods and features of equipping the company with technological equipment and technical means. The project is based on the processing of goat skin into clothing leather. The main technological calculations of chemical materials and additional resources to ensure the operation of the enterprise. The general and production structure of the project enterprise is presented. The layout of the production equipment of the enterprise and its general plan are given. The project proposes the use of wastewater treatment technology – biological which is based on the use of microorganisms. This is a modern method that allows you to reduce the amount of water used by the design company by using it in the reverse process.
Шевченко, І. А. "Облік і контроль готової продукції та її реалізації (на прикладі ТОВ «Телекарт-Прилад»)." Thesis, Одеський національний економічний університет, 2021. http://local.lib/diploma/Shevchenko.pdf.
Full textУ роботі розглядаються теоретичні аспекти бухгалтерського обліку, контролю та аналізу готової продукції, нормативно-правове регулювання, галузеві особливості та сучасні проблеми обліку готової продукції. Проаналізовано фінансово-економічний стан ТОВ «Телекарт-Прилад», показники виробництва продукції, витрат та рентабельності; висвітлено документування та організацію бухгалтерського обліку готової продукції підприємства, виявлено їх недоліки. Запропоновано класифікувати готову продукцію за призначенням (продукція, що постачається за ЗЕД-контрактами; продукція оборонного призначення, що постачається за державними контрактами; продукція для комунального господарства, що постачається за замовленнями структур місцевої / регіональної влади; інша (базова) продукція); відповідно до даної класифікації впровадити субрахунки третього та четвертого порядків на рахунках 20, 23, 26, 70, 90, 93; впровадити додаткові контрольні та аналітичні процедури (зустрічні та випадкові перевірки тощо).
The work deals with the theoretical aspects of accounting, control and analysis of finished products, legal regulation, industry features and modern problems of accounting for finished products. Author analysis the financial and economic condition of LLC "Telecard-Device", indicators of production, costs and profitability; the documentation and organization of accounting of finished products, their shortcomings. Author offers to classify finished products by purpose (products supplied under foreign trade contracts; defense products supplied under state contracts; products for public utilities supplied by local / regional authorities; other (basic) products); in accordance with this classification to introduce sub-accounts of the third and fourth orders on accounts 20, 23, 26, 70, 90, 93; introduce additional control and analytical procedures (counter and random inspections, etc.).
Квітка, Андрій Віталійович. "Проєкт підприємства з виробництва шкір для швейних виробів з овчини потужністю 90 млн кв. дм за рік." Магістерська робота, Київський національний університет технологій та дизайну, 2021. https://er.knutd.edu.ua/handle/123456789/19268.
Full textThe master's thesis project is devoted to the issue of designing a leather enterprise for the production of leather for garments from the sheep skin. The project substantiates the choice of raw materials, production methods and equipment of the enterprise with technological equipment and technical means. The project is based on the processing of sheepskin into leather for garments. The basic technological calculations of the equipment, necessary chemical materials, additional resources for maintenance of work of the enterprise are carried out. The general and production structure of the project enterprise for the production of leather for sheepskin garments is presented. The layout of the production equipment of the enterprise and its general plan are given. The project considers the greening of leather production processes and proposes new methods of wastewater treatment. In particular, the technology of anaerobic-aerobic wastewater treatment using activated sludge is presented.
Деревянко, С. В. "Управління якістю продукції, що виробляється." Thesis, Чернігів, 2021. http://ir.stu.cn.ua/123456789/22756.
Full textМетою даної дипломної роботи є дослідження теоретичних і практичних аспектів побудови та функціонування системи управління якістю, а також розробка практичних рекомендацій щодо забезпечення її ефективного функціонування на досліджуваному підприємстві. У першому розділі розкриваються теоретичні основи управління якістю продукції: поняття якості продукції, її основні показники та методи оцінки, системи управління якістю продукції на підприємстві, стандартизація та сертифікація продукції як елементи управління якістю. У другому розділі проводиться аналіз стану управління якістю ПАТ «Львівська кондитерська фабрика „Світоч“»: техніко-економічна характеристика підприємства, методи управління якістю продукції на підприємстві, стан управління якістю продукції ПАТ «Львівська кондитерська фабрика „Світоч“». У третьому розділі формуються шляхи покращення управління якості продукції: застосування системи менеджменту якості на підприємстві, впровадження елементів внутрішнього аудиту якості в організації, пропозиції щодо підвищення якості продукції. За результатами роботи зроблено висновки і пропозиції щодо покращення управління якості продукції ПАТ «Львівська кондитерська фабрика „Світоч“».
The purpose of this thesis is to study the theoretical and practical aspects of construction and operation of the quality management system, as well as the development of practical recommendations for ensuring its effective functioning in the researched enterprise. The first section reveals the theoretical foundations of product quality management: the concept of product quality, its main indicators and evaluation methods, product quality management systems at the enterprise, standardization and certification of products as elements of quality management. The second section analyzes the state of quality management of PJSC "Lviv Confectionery Factory" Svitoch ": technical and economic characteristics of the enterprise, methods of product quality management at the enterprise, the state of product quality management of PJSC" Lviv Confectionery Factory "Svitoch". The third section forms ways to improve product quality management: the use of quality management system in the enterprise, the introduction of elements of internal quality audit in the organization, proposals to improve product quality. Based on the results of the work, conclusions and proposals were made to improve the product quality management of PJSC "Lviv Confectionery Factory" Svitoch ".
Бохан, М. Ю. "Проєкт реконструкції хлібозаводу з установкою однієї печі А2-ХПК-25 для випікання хліба та двох ротаційних печей «Бокс-600М» для здобних виробів та сухарів, який передбачає порційний заміс напівфабрикатів у тістомісильних машинах «DIOSNA»." Thesis, Чернігів, 2022. http://ir.stu.cn.ua/123456789/25383.
Full textРозроблено проєкт реконструкції хлібозаводу з установкою однієї печі А2-ХПК-25 для випікання хліба та двох ротаційних печей «Бокс-600М» для здобних виробів та сухарів, який передбачає порційний заміс напівфабрикатів у тістомісильних машинах «DIOSNA». Запропоновано підприємство, що підлягає модернізації та обґрунтовано заходи будівництва. Описано технологічні схеми виробництва представленого асортименту. Наведено технологічні розрахунки, які необхідні для реалізації проекту реконструкції. Здійснено розрахунок та вибір технологічного обладнання для модернізованого підприємства.
A project for the reconstruction of the bakery with the installation of one A2-HPK-25 oven for baking bread and two rotary ovens "Box-600M" for buttery products and rusks has been developed. The enterprise subject to modernization is offered and construction measures are substantiated. Technological schemes of production of the presented assortment are described. The technological calculations necessary for the implementation of the reconstruction project are given. The calculation and selection of technological equipment for the modernized enterprise is carried out.
Liu, Yu-Chang, and 劉育昌. "A study on scheduling and finished products distribution problem of mass customized standardization production." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/18175029801755690610.
Full text國立高雄應用科技大學
工業工程與管理系碩士班
94
Abstract It is important and valuable to satisfy customers’demands with the concept of customization in a competitive business environment of advanced technology and trend of globalization. In this study, the optimal production scheduling and products distribution problem of customized standardization production systems is discussed. Customized standardization production systems are able to assure both the various demands of customer and the cost-benefit of supply chain. In this study, a mathematical cost model is first constructed with the basic concept of advanced planning and scheduling (APS), which includes several cost items, such as transportation, shortage and customization. This mathematical cost model minimizes the objective cost. Moreover, under the conditions of the inputs of parameter, limitations of supply, and lead time of demand, the optimal objective cost and related values of variable, which consist the amounts of transportation of available to promise and customers’ shortage. The solutions of the model will be able to satisfy limitations and obtain the optimal results. Then, by using the optimal values of transportation of available to promise as input of parameter of two VRP’ mathematical cost models, hence, the decision makers can have more accurate information to solve the optimal productive scheduling and distribution problem of customized standardization production systems. Keywords:mass customization, customized standardization, advanced planning and scheduling, vehicle routing problem
Zilker, Markus. "The stability of finished pharmaceutical products and drug substances beyond their labeled expiry dates." Doctoral thesis, 2019. https://nbn-resolving.org/urn:nbn:de:bvb:20-opus-180695.
Full textBei der Zulassung eines Arzneimittels muss die Stabilität sowohl des Wirkstoffes als auch des Fertigarzneimittels umfassend untersucht werden, da dies für die Festlegung der Haltbarkeit wesentlich ist. Wenn sich herausstellt, dass ein Arzneimittel stabil ist, wird das Verfallsdatum auf höchstens fünf Jahre festgelegt. Neigt ein Arzneimittel zum Abbau, so wird ein kürzeres Verfallsdatum gewählt. Das Arzneimittel muss innerhalb der Haltbarkeitsfrist definierten Spezifikationen entsprechen, welche in den ICH-Richtlinien Q6A und Q6B festgelegt sind. Dabei muss insbesondere der Wirkstoff-Gehalt des Arzneimittels gemäß der ICH-Richtlinie Q1A(R2) innerhalb der Spezifikation von 95–105 % der deklarierten Konzentration liegen. In der Literatur gibt es jedoch wenige Informationen darüber, wie stabil Arzneimittel lange nach Ablauf des Verfallsdatums sind. Das Ziel dieser Arbeit war es, die Stabilität zahlreicher Feststoffe und Ampullen, die aus einer Altarzneimittel-Sammlung stammten und während des 20. Jahrhunderts hergestellt wurden, zu untersuchen und zu bewerten. Der Gehalt und das Verunreinigungsprofil wurden mittels geeigneter instrumenteller Analyseverfahren bestimmt, wobei hauptsächlich flüssigchromatographische Methoden zur Anwendung kamen. Die Untersuchungsergebnisse wurden mit Literaturdaten verglichen und es wurde eine Beurteilung der Stabilität in Abhängigkeit von der Darreichungsform und der Zugehörigkeit zu einer Arzneistoffklasse vorgenommen. Die experimentellen Studien umfassten die Untersuchung von 50 Feststoffen, die vor 20 bis 30 Jahren hergestellt worden waren, und 14 Alt-Ampullen, die ein Alter von mindestens 40 Jahre aufwiesen und damit die maximale Haltbarkeit von fünf Jahren um ein Vielfaches überschritten hatten. Zur Untersuchung der Feststoffe wurden meist Arzneibuchmethoden verwendet. Die Ergebnisse zeigten, dass 44 geprüfte Substanzen auch nach mehr als zwei Jahrzehnten hinsichtlich ihres Gehalts und Verunreinigungsprofils den jeweiligen Spezifikationen des Europäischen Arzneibuchs entsprachen. Zur Analyse der Alt Ampullen wurden HPLC-UV- und HPLC-ESI/MS-Techniken eingesetzt. Diese basierten häufig auf Arzneibuch-Methoden zur Prüfung auf verwandte Substanzen. Für die Gehaltsbestimmungen wurden entsprechend der ICH-Richtlinie Q2(R1) die erforderlichen Parameter validiert. Einige Ampullen zeigten eine überraschend hohe Stabilität des Wirkstoffs, trotz ihres Alters von 53 bis 72 Jahren. Dabei entsprachen die Wirkstoffe Koffein, Etilefrin, Synephrin, Metamizol Natrium, Furosemid und Natriumsalicylat dem heute gültigen Spezifikationsbereich von 95–105 %. Nichtsdestoweniger wurden bei einigen Ampullen typische Abbaureaktionen wie Hydrolyse, Oxidation oder Isomerisierung festgestellt. Die Hydrolyse der Arzneistoffe Scopolamin, Procain und Adenosintriphosphat führte zu verringerten Gehalten von 71 %, 70 % bzw. 15 % der jeweiligen gekennzeichneten Wirkstoffkonzentration. Die Epinephrin- und Dipyridamol-Injektionslösungen waren von oxidativem Abbau betroffen. Der Wirkstoffgehalt dieser Ampullen lag jeweils bei ca. 70 %. In der Dihydroergotamin Ampulle trat eine massive Epimerisierung auf, wobei ein Gehalt von 21 % bestimmt wurde. Aufgrund der Isomerisierung des Arzneistoffes Lobelin reduzierte sich der Wirkstoffgehalt auf 64 %. Als Schlussfolgerung der experimentellen Studien und der verfügbaren Daten aus der Literatur sollten die pharmazeutischen Unternehmer und die Aufsichtsbehörden erwägen, die Haltbarkeitsdauer für zahlreiche Arzneimittel zu verlängern, wenn dies basierend auf Stabilitätsuntersuchungen gerechtfertigt ist. Eine generelle Ausweitung der Verwendbarkeit von Arzneimitteln sowie die Abschaffung oder Erweiterung der maximalen Haltbarkeitsdauer von fünf Jahren würde die Entsorgung noch wirksamer Medikamente verhindern und dem Gesundheitssystem viel Geld einsparen
Gaspar, Ana Filipa Morgado. "Decision Support Methodology when Entering New Markets for a Semi-Finished Bronze Products Foundry." Master's thesis, 2018. http://hdl.handle.net/10362/47626.
Full textYang, Tzu-I., and 楊子逸. "Considering costs of semi-finished products transportation and recycling of packaging materials shared in TFT-LCD industry." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/57713830771596273528.
Full text中原大學
工業與系統工程研究所
104
In the cost structure table of TFT-LCD, the proportion of packaging materials were up to 15%, and were the second major cost of the whole cost. The reason of this is that when traditional TFT-LCD industries transport semi-manufactured goods, in order to protect the products from damage by collide, they chose high protective packing materials however the cost cannot decrease due to the limit of Japanese supplier skills’ and patent. Recently the trend of product diversification and customized, led to the highly increase of logistic cost and also cause environmental problems. Therefore this research hope to investigate the recycle method of green logistic that one of the internal TFT-LCD company proposed; the change of the cost and the actual logistic mode, and provide a better solution for enterprises. By using the way that Chen mei yu(2006) proposed to get the demand when solving, and connect with the TFT-LCD company to get related information then operate with VBA program. From numerical example and parameter analysis result, we can find out that whether in what kind of recycle rate in green logistic the total cost is less than the actual logistic mode and using the analysis result to provide the enterprise different transport boxes’ recycle rate and different strategic decision.
Lin, Ching-Ying, and 林慶胤. "A Study on Innovative business model in the standardization of agricultural products competitive strategy." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/92153241702657861314.
Full text國立臺北大學
企業管理學系碩士在職專班
103
Taiwan is very mountainous and less plain with less arable area , and the general traditional agriculture using a large number of chemical fertilizers and pesticides, and easy to be affected by the weather for its production season. In addition, although the homemade organic agriculture using organic fertilizer, adopting layers of filtration of water for irrigation, constructing scaffolds of net house for preventing diseases and insect pests, but the crops yield less and expensive, and may also be affected by the nearby traditional agricultural areas. The plant factory adopting greenhouse agricultural production, but its energy consumption is too high and its key hardware and software equipment is expensive, especially coupled with the high cost of high energy consumption. Therefore this study attempted to find a balance among the three ones. Accordingly, this study based on A case of Vegetables and Fruits Marketing Cooperative Association and B case of organic farm of a unique business model, and use the 9 Building Blocks of Business Model Generation as the frame of study by Alexander Osterwalder & Yves Pigneur. This study mainly would discuss how to drive the change of Taiwan’s agricultural industry and get out of the trouble of Taiwan’s agriculture through innovative business model of agricultural science and technology, and meanwhile create an opportunity for future development of Taiwan’s agriculture as well as build the business model different from other competitor’s one.
Kuo, Che-shao, and 郭哲韶. "Applying Six Sigma on Reducing Stocks of Finished Products – A Case study on a Powder Coating Resin Company." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/w4p3cd.
Full text國立中山大學
高階經營碩士班
104
Powder Coating Resin industry is increasingly competitive. Besides providing reasonable prices to customers to consolidate market share, how to enhance satisfaction rate on delivery to bring extra value to the client, and how to reduce company’s Operating Working Captial (OWC) to obtain better financial results, are the two primary goals that enterprises are pursuing. Recently, global recession becomes a normal conditon and production operating rate is often times less than 100%. Under such conditions, how to successfully arrange delivery to meet customers’ needs and well control finished goods inventory becomes very crucial. Therefore, this study aims at identifying approaches for leveraging company''s earnings, customer satisfication, and asset of finished Stock. This study is conducted on using data provided by a powder coating resins producing company. Through applying Lean Six Sigma, this study investigates and analyzes the company''s historical data, between June, 2014 to December, 2015. After exploring the impacts of finished goods inventory on Operating working capital (OWC) and customer satisfaction rate of delivery, we conclude that product inventory control is an importand and imperative problem faced by the company. Furthermore, through applying DMAIC on the selected case, we identified the key factor that affects inveotry control: Top 10 products inventory quantities. With proper control of the top 10 products invenotry and the safety stock setting at 950 tons, the customer delivery satisfaction rate will reach up to 96%. It is our hope that the adopted framework can serve as a practical decision-making model which allows the Powder Coating Resins producers to optimize its month-end finished goods inventory.
Пройденко, І. В. "Обліково-аналітичне забезпечення та аудит процесу виробництва та реалізації готової продукції (на прикладі ПП Фірма «Гармаш»)." Thesis, 2018. http://dspace.oneu.edu.ua/jspui/handle/123456789/9725.
Full textThe aim of the study. The aim of the work is to highlight the peculiarities of accounting, analysis and audit of production and sales of finished products, development of practical proposals aimed at solving theoretical and practical aspects in relation to this issue.
LIAO, YI-CHENG, and 廖逸城. "Applying Taguchi quality engineering to explore the optimum parameters of semi-finished products - take rubber industry as an example." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/95p74a.
Full text國立雲林科技大學
工業工程與管理系
103
The purpose of this study was to apply Taguchi methods to find the best combination of manufacturing process parameters for a manufacturing company as a case study. This study used Taguchi’s orthogonal array, L9 (34), to design the investigation in order to reduce the number of experiments, time, and costs. The investigation applied the design of experiment and the expertise of the manufacturing company to realize the impact of the trade off of four process control factors; namely A (120ψ feed inlet temperature ºC), B (rotation speed rpm), C (flow velocity M / min ), and D (bath temperature ºC). The results shows that the optimum parameters for the manufacturing processes are A = 70 ºC, B = 36.8 rpm, C = 10.08 M / min, D =21 ºC. A confirmation run was made to confirm that the chosen control factors were indeed optimised. The result of this confirmation run shows that the company's manufacturing process capability has been improved Key words:Taguchi Techniques for Quality Engineering, Taguchi method, Tread, Process capability
Chang, Hui-Hsien, and 張慧嫺. "Occurrence of Disinfection By-Products (DBPs) in Finished Water and Formation of Emerging DBPs from Polluted Source Water in Taiwan." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/06285410108202124459.
Full text國立臺灣大學
環境衛生研究所
99
Disinfectants used in water treatments can react with the organic materials to form various disinfection by-products (DBPs). The carbonated DBPs (C-DBPs), which mainly include trihalomethanes (THMs) and haloacetic acids (HAAs) in drinking water, have been shown to possess different kinds of toxicities, mutagenicities and carcinogenicities. Due to the analytical limitation and lack of regulation for HAAs in drinking water, the database for distribution of HAAs in drinking water has been not available in Taiwan. Nitrosamines are a class of emerging nitrogenated DBPs (N-DBPs), which are mainly formed with treatments of chloramination, and far more carcinogenic than traditional C-DBPs. Among nitrosamines, N-nitrosodimethylamine (NDMA) is the dominant species in drinking water. Besides chloramines, dissolved organic nitrogen (DON) compounds have been recognized as important precursors of nitrosamines and many of them have not been identified. This study included three objectives: (1) to establish the preliminary database of HAAs and THMs in Taiwan based on water samples collected from 141 water treatment plants (WTPs) between 2007 and 2009. (2) Nine representative nitrogenous organic compounds with different DON characteristics and structures were selected to react with free chlorine, chlorine dioxide and monochloramine for their DBP formation characteristics (nitrosamines, THMs and HAAs). (3) A modified DON fractionation method (DAX-8, XAD-4 and MSC-1H resins) was used to fractionate the seasonal effluents of Neihu wastewater treatment plant in Taipei City (TN) and source waters of Tai Lake WTP in Kinmen (KT). The concentrations of HAAs were distributed from 0.5 to 84.4 μg/L and those of THMs were from ND to 133.2 μg/L. Due to the various raw water qualities, the C-DBP concentrations showed the seasonal and geographical variations in different parts of Taiwan, and a higher portions of brominated species was observed in the off-shore island WTPs. Moreover, statistically significant (P<0.005) logarithmic linear regression models were also proposed to describe the correlations between the total THMs (TTHM) and HAAs (HAA5=1.219×TTHM0.754; HAA9=1.824×TTHM0.735). In the DBPs formation tests of surrogate compounds, dimethylamine (DMA), benzyldimethyltetradecylamine (benzalkonium chloride, BKC) and 3-(N,N-dimethyloctyl-ammonio)propanesulfonate (3-N,N-DAPSIS) inner salt were identified as potent precursors for C-DBPs (up to 2700 μg/L of THMs) and N-DBPs (up to 2×105 ng/L of NDMA). Then, further studies of DMA, 3-N,N-DAPSIS and BKC were performed to determine the impact of pH, reaction temperature and bromide concentration on DBP formations. The DBP yields apparently increased with rising temperature, however, no consistent correlations were observed between DBPs yields and pH. Bromide shifted the DBP species into brominated DBPs, and this phenomenon was more apparent when BKC was treated with chloramine. For the survey of DON distributions and compositions, both TN and KT samples had similar compositions of DON fractions except for AMPB/N isolate to show the general trend: HPOA > HPIA/N > HPIB > AMPA > HPOB/N > AA. Finally, seasonal isolate samples were mixed to perform the DBPFPs with the three disinfectants mentioned previously. It was found that the AA fraction formed the highest amounts of C-DBPs (up to 1258.2 μg/L of THMs), and the AMPB/N fraction could form as high as 9238.0 ng/L of NDMA at 10 mg/L of NPDOC.
HUANG, JIA-RONG, and 黃家榮. "A Study of applying Taguchi Method to explore the optimum parameters to semi-finished products- in the rubber company in Central Taiwan." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/7yr2r3.
Full text國立雲林科技大學
工業工程與管理系
104
Along with the maturing development of tire manufacturing, it is necessary to work hard in quality if you want to stand out in the brand dazzling market. Taguchi quality engineering is applied in this study for the optimum production parameters of the inner liner of tires, one of the six main semi-finished products, thereby enhance its process capability. The control factors of Taguchi orthogonal table L9 (34) is decided in this paper in accordance with 4M1E method and use fishbone diagram to list the possible factors that could affect the quality characteristics, and discuss with the site supervisor and machine operator technician on the basis of the rule of thumb: extruding machine speed (rpm), calendaring machine roller speed (M / min), the nip (operating side), the nip (driving side). The optimal level control factor combination is gotten by the Taguchi experimental design via the Nominal the Best (NTB) S / N response table and the average response table: extruding machine speed (35.8rpm), calendaring machine roller speed (24.2M / min), the operating side of the nip (0.62 mm), and driving side of the nip (0.66 mm). The optimum combination of parameters is obtained, and then conducts hands-on verification. The capability of accuracy Ca value rating of A-class, capability of precision Cp value level increased from D-class to A-class, process capability index Cpk value level upgraded from the D-class to B-class, and the standard deviation down to 0.02 are obtained ultimately. The results get effective verification, and confirm the ability to process substantial progress. Keywords : Taguchi quality engineering , Design of experiments , Tires, Inner liner
Андрющенко, А. В. "Особливості обліку та контролю формування собівартості готової продукції рослинництва ПОСП «Берізка»." Thesis, 2018. http://dspace.oneu.edu.ua/jspui/handle/123456789/9684.
Full textMaster's thesis consists of three chapters. Object of study is peculiarities of accounting and control over prime cost formation on finished products at the Private Leased Agricultural Enterprise «Berizka». Diploma thesis deals with theoretical aspects of accounting and calculating prime cost of finished products. Analysis: formation of expenses upon prime cost of finished products; internal control system. Proposals: methods of improving finished product accounting; improving the internal control system upon finished product operations; methods of economic and mathematic modelling in order to provide reasonable level of production costs.
Кузьменко, К. О. "Сучасний стан облiку, аудиту та аналiзу руху готової продукцiї (на прикладi ТОВ «Цемент»)." Thesis, 2018. http://dspace.oneu.edu.ua/jspui/handle/123456789/7318.
Full textВ работе рассматриваются теоретические аспекты учета, аудита и анализа готовой продукции и ее реализации, методика и организация учета аудита и анализа операций с готовой продукцией на ООО «Цемент» Проанализированы действующую на исследуемом предприятии систему учета, аудита и анализа готовой продукции и ее реализации, Предложено внести изменения в учетную политику, в которой должны указываться основные принципы, методы и процедуры, используемые для учета готовой продукции и ее реализации на предприятии; управленческому персоналу общества нужно разработать комплекс мер по наращиванию объемов реализации продукции; разработать маркетинговую политику, тактику и стратегию, направленных на формирование спроса на продукцию и стимулирование сбыта.
Thesis consists of three chapters. Object of study – processes of organization, accounting and audit in development of finished products on example of TOV «Cement» Diploma thesis deals with theoretical aspects of accounting, audit and analysis of finished products, it’s realization, methods and organization of accounting, audit and analysis of the operations with finished products of TOV «Cement». The operational system of accounting, audit and analysis of finished products of the explored company was analysed. It was proposed to implement some changes to the accounting politics, which should point on the main principles, methods and procedures, which are used for accounting of finished products and it’s realization in the company; the management of the company should develop the complex of measures concerning the increasing of the volume of products realization; to develop marketing policy, tactics and strategy directed on the forming of demand on the production and stimulation of marketing.
Думен, А. О. "Облік і контроль готової продукції на вітчизняних підприємствах: сучасний стан та перспективи розвитку (на прикладі ТОВ «Протос»)." Thesis, 2018. http://dspace.oneu.edu.ua/jspui/handle/123456789/9691.
Full textThe work deals with the theoretical aspects of accounting and control of the finished products and the search for ways of improvement on the example of «Protos». Author analysis general financial condition of the investigated enterprise.
Возовик, К. О. "Облік, аналіз та контроль готової продукції (на прикладі ПП ВКФ «НІКА ПЛАСТ»)." Thesis, 2018. http://dspace.oneu.edu.ua/jspui/handle/123456789/9578.
Full textThesis consists of three chapters.The paper deals with discussion issues of accounting and analysis of finished products. The work based on PKF PE «NIKA PLAST». In the process, were made conclusions and recommendations for accounting, analysis and control finished products PKF PE «NIKA PLAST».
Ströhle, Selina. "Categorization and integration of new and innovative materials in the development process of semi-finished products at the Dr. Ing. H.C. F. Porsche Ag." Master's thesis, 2017. http://hdl.handle.net/10362/23593.
Full textКонстантинова, В. В. "Облік та контроль готової продукції та її реалізації на прикладі ФГ «Троян-Агро-Плюс»." Thesis, 2018. http://dspace.oneu.edu.ua/jspui/handle/123456789/8814.
Full textThe system of accounting, analysis and control of finished products and their sales on an example of FG "Troyan-Agro-Plus" is considered in the work. The question of the economic essence of "finished goods", evaluation and classification of finished products, problematic issues of accounting for finished products, documenting the movement of finished products at the enterprise, accounting for income and expenses in the process of sales of finished products was investigated. Recommendations for improving the production and sales accounting for FG "Troyan-Agro-Plus" are submitted. The analysis and control of the availability and movement of finished products and their implementation are carried out.
Спас, Оксана Дмитрівна, and Oksana Spas. "Дослідження впливу ревеню на процес виготовлення булочних виробів із застосуванням його в хлібопекарському цеху." Master's thesis, 2021. http://elartu.tntu.edu.ua/handle/lib/36837.
Full textThe recipe and technology of making buns with rhubarb puree have been developed. The characteristics of raw materials and its influence on the properties of flour, the course of the technological process and the quality of products are studied. Calculations of economic efficiency of production of "Rhubarb" rolls are carried out.
Вступ...Технологічна частина.... 9 1.1 Вибір, обґрунтування та опис технологічної схеми... 1.1.1 Батон «Домашній». 1.1.2 Булки «Ревеневі».... 1.2 Технологічні розрахунки.. 1.2.2 Розрахунок пофазних рецептур... 1.2.2.1 Розрахунок пофазної рецептури приготування батону «Домашній»........ 1.2.2.2 Розрахунок пофазної рецептури приготування булок «Ревеневі»....... 1.2.3 Розрахунок виходу виробів... 1.2.3.1 Батон «Домашній»....... 1.2.3.2 Булки «Ревеневі»...... 1.2.4 Розрахунок виробничих рецептур і вибір технологічних параметрів.......... 1.2.4.1 Батон «Домашній»... 1.2.4.2 Булки «Ревеневі».... 1.2.5 Розрахунок витрат сировини....... 1.2.6 Розрахунок площ для зберігання сировини..... 1.2.7 Розрахунок і вибір технологічного обладнання..... 1.2.7.1 Розрахунок місткостей для зберігання сировини..... 1.2.7.2 Розрахунок обладнання для напівфабрикатів...... 1.2.7.3 Розрахунок обладнання для оброблення напівфабрикатів....... 1.2.8 Розрахунок ємкості хлібосховища та експедиції...... 2 Науково-дослідна частина.... 2.1 Аналітичний огляд літературних джерел.... 2.1.1 Сучасний стан та тенденції розвитку хлібобулочної промисловості України..... 2.2.2 Аналіз асортименту та технологій виробництва хлібобулочних виробів...... 2.2.3 Характеристика ревеню та його використання у харчовій промисловості..... 2.2 Мета, об’єкт, предмет та методи дослідження.... 2.3 Власні дослідження та їх обговорення....... 2.3.1 Дослідження використаної сировини..... 2.3.2 Дослідження впливу дозування пюре на якість булочок.... 2.3.3 Дослідження впливу добавки на властивості борошна та хід технологічного процесу....... 2.4 Обгрунтування економічної ефективності виробництва булок «Ревеневі»....... 3 Охорона праці та безпека в надзвичайних ситуаціях.... 3.1 Охорона праці...... 3.2 Безпека в надзвичайних ситуаціях...... Загальні висновки........ Список використаних джерел.....Додатки........
Патрикан, М. В. "Готова продукція - відображення в обліку, звітності та аудит: національний та міжнародний досвід (на прикладі ТОВ «Телекарт-Прилад»)." Thesis, 2017. http://dspace.oneu.edu.ua/jspui/handle/123456789/6349.
Full textИзучение учета, анализа и аудита готовой продукции и разработка мероприятий по их улучшению и совершенствованию.
Study of accounting, analysis and audit of finished products and development of measures for their improvement and improvement.
Жеребецька, Ю. В. "Облік і аналіз готової продукції та її реалізації (на прикладі ТОВ «ТК Единство»)." Thesis, 2018. http://dspace.oneu.edu.ua/jspui/handle/123456789/7495.
Full textВ работе рассматриваются теоретические аспекты бухгалтерского учета, отчетности и экономического анализа готовой продукции и ее реализации и разработка рекомендаций по их совершенствования в современных условиях хозяйствования. Проанализированы основные особенности бухгалтерского учета наличия и движения готовой продукции, специфика учета процесса реализации готовой продукции, рассмотрен методику и организацию бухгалтерского учета и финансовой отчетности, указаны основные усовершенствования готовой продукции на основе современных компьютерных технологий Предложены пути использования результатов анализа для эффективного управления и оптимизацию развития экспортной деятельности в Украине.
The work deals with the theoretical aspects of accounting, reporting and economic analysis of finished products and its implementation, and developing recommendations for their improvement in modern economic conditions. Author analysis the main features of the accounting of the availability and movement of finished products, the specifics of the accounting process for the implementation of finished products are analyzed, the methodology and organization of accounting and financial reporting are considered, the main improvements of finished products on the basis of modern computer technologiesThe ways of use of the results of analysis for the effective management and optimization of development of export activity in Ukraine are offered.
Лісіна, Наталія Леонідівна. "Удосконалення обліку та зовнішнього аудиту готової продукції на ПАТ «Миколаївський експертно-технічний центр»." Магістерська робота, 2020. https://dspace.znu.edu.ua/jspui/handle/12345/2303.
Full textUA : Досліджено теоретичні основи обліку та зовнішнього аудиту готової продукції на підприємстві. Проаналізовано фінансовий стан на ПАТ «Миколаївський експертно-технічний центр». Проведено зовнішній аудит готової продукції на ПАТ «Миколаївський експертно-технічний центр». Розроблені шляхи щодо удосконалення обліку та зовнішнього аудиту готової продукції на ПАТ «Миколаївський експертно-технічний центр».
EN : The theoretical bases of accounting and external audit of finished products at the enterprise are investigated. The financial situation at PJSC «Nikolaev Expert and Technical Center» is analyzed. External audit of finished products at PJSC «Mykolayiv Expert and Technical Center» was carried out. Ways to improve accounting and external audit of finished products at PJSC "Mykolayiv Expert and Technical Center" were developed.
Бриль, О. Ю. "Методичні та практичні аспекти обліку, аналізу та аудиту виробництва і реалізації готової продукції (на прикладі ПАТ «Олимп-Круг»)." Thesis, 2015. http://dspace.oneu.edu.ua/jspui/handle/123456789/4181.
Full textЦелью работы является углубление теоретических основ, также исследования организации и методологии бухгалтерского учета, контроля и анализа готовой продукции и разработка практических предложений по совершенствованию учетно-методического обеспечения готовой продукции.
The aim is to deepen the theoretical foundations, and research organization and methodology of accounting, control and analysis of finished products and the development of practical proposals to improve the accounting and methodological support of the finished product.
Лехняк, Вікторія Степанівна, and Lekhniak V. S. "Формування системи обліку та аналізу готової продукції промислових підприємств (на прикладі ТзОВ «Укрполь -2005»)." Master's thesis, 2019. http://elartu.tntu.edu.ua/handle/lib/29893.
Full textThe thesis is devoted to the study of theoretical approaches to the construction of accounting, analysis and audit of finished products at the enterprise. The economic essence of the concept of finished products is investigated, its classification and methods of estimation are substantiated. Regulatory approaches to accounting of finished products are considered. Some aspects of accounting and auditing of finished products of the enterprise are summarized and improved. Organizational aspects of analysis and audit of finished products are considered. The directions and methods of internal audit of finished products are investigated. The author analyzes the dynamics of production, range and structure of production. Issues of cost and profitability of finished products are evaluated and proposals for management decisions are made based on the calculations made. The state of occupational safety and use of plans of protection of sources of communal-energy systems at the enterprise are studied.
Грінченко, Аліна Юріївна. "Облік та аналіз випуску та реалізації готової продукції ТОВ «Тісес Груп»." Магістерська робота, 2020. https://dspace.znu.edu.ua/jspui/handle/12345/2452.
Full textUA : Кваліфікаційна робота: 105 с., 15 рис., 16 табл., 22 формули, 2 додатка, 44 літературних джерел. Об'єктом дослідження є процес відображення в обліку господарських операцій пов’язаних з рухом готової продукції та їх аналіз на прикладі діяльності ТОВ «ТІСЕС ГРУП». Метою кваліфікаційної роботи є дослідження особливостей відображення в обліку та проведення комплексного аналізу господарських операцій пов’язаних з рухом готової продукції на прикладі діяльності ТОВ «ТІСЕС ГРУП». Методи дослідження – абстрактно-логічний, балансовий, монографічний, системного аналізу, порівняльний, графічний, спостереження, групування, аналіз і синтез. Найважливіші результати дослідження, що містять наукову новизну полягають в наступному: ⎯ досліджено погляди економістів щодо формування понять «готова продукція», «збут (реалізація)», охарактеризовано особливості формування вартості продукції, яка виготовляється та реалізовується покупцям і замовникам на сторону; ⎯ виокремлено норми правого забезпечення організації обліку готової продукції та її реалізації на підприємствах; ⎯ уточнено первинний облік готової продукції та форми бухгалтерських регістрів з обліку готової продукції на підприємстві; ⎯ набули подальшого розвитку питання методики та організації аналітичного та синтетичного наявності та руху обліку готової продукції, зокрема показано механізм використання ряду субрахунків та аналітичних рахунків першого подяку до рахунка 23 «Виробництво» та позабалансових рахунків; ⎯ проведено аналіз фінансового стану підприємства ТОВ «ТІСЕС ГРУП»; ⎯ проведено аналіз діяльності підприємства ТОВ «ТІСЕС ГРУП», особливо в частині виробництва продукції та реалізації готової продукції; ⎯ визначено фактори та резерви збільшення випуску і реалізації готової продукції підприємства ТОВ «ТІСЕС ГРУП». За результатами дослідження запропоновано напрями вдосконалення обліку готової продукції в системі бухгалтерського обліку та визначено резерви підвищення ефективності виробництва та реалізації готової продукції на ТОВ «ТІСЕС ГРУП». Надані рекомендації створюють основу для вирішення проблем обліку, ефективності виробництва та реалізації готової продукції на досліджуваному підприємстві
EN : Qualifying work: 105 pp., 15 fig., 16 tab., 22 formulas, 2 annex, 44 references. The object of the research is the process of reflection in the accounting of business transactions related to the movement of finished products and their analysis on the example of the activity of LLC «TICES GROUP». The purpose of the qualification work is to investigate the features of accounting and comprehensive analysis of business transactions related to the movement of finished products on the example of the activity of TICES GROUP LLC. Research methods – abstract-logical, balance, monographic, system analysis, comparative, graphic, observation, grouping, analysis and synthesis. The most important results of research containing scientific novelty are as follows: ⎯ the views of economists are examined on the formation of the concepts of "finished goods", "sales (sales)" are investigated, the features of formation of the cost of production, which are manufactured and sold to buyers and customers on the side, are characterized; ⎯ hор the norms of the right provision of the organization of accounting of finished goods and its realization at the enterprises were singled out; ⎯ primary accounting has been clarified of finished goods and the form of accounting registers for accounting of finished products at the enterprise have been specified; ⎯ questions of methodology were further developed and organization of analytical and synthetic availability and movement of accounting of finished products have been further developed, in particular the mechanism of using a number of subaccounts and analytical accounts of the first thank you to account 23 «Production» and off-balance sheet accounts; ⎯ the analysis of the financial condition was carried out of the company LLC TICES GROUP; ⎯ аnalysis of the activity of the company TICES GROUP LLC, especially in the part of production and sale of finished products; ⎯ factors and reserves of increase of output and sale of finished goods of the enterprise of TICES GROUP LLC have been determined. According to the results of the research, the directions of improvement of accounting of finished products in the accounting system were proposed and reserves for increasing the efficiency of production and sale of finished products at TICES GROUP LLC were determined. The given recommendations form the basis for solving the problems of accounting, production efficiency and sales of finished products at the studied enterprise.
Макоїд, О. Є. "Облік і контроль руху готової продукції та її реалізації: нормативне забезпечення та діюча практика (на прикладі ТОВ «Форес»)." Thesis, 2018. http://dspace.oneu.edu.ua/jspui/handle/123456789/7504.
Full textКвалификационная работа магистра состоит из трех разделов. Объект исследования – процесс учета, контроля и экономического анализа движения готовой продукции и ее реализации. В работе рассматривается теоретические аспекты учета и контроля движения готовой продукции и ее реализации, а именно: понятие, классификация, оценка; особенности документального оформления; вопросы аналитического и синтетического учета, аспекты контроля и анализа. Проанализированы организационно-экономическую деятельность ООО «Форес», действующую модель учета и контроля движения готовой продукции и ее реализации. Предложено пути усовершенствования учета и контроля движения готовой продукции и ее реализации.
Master's qualification work consists of three sections. The object of research - the process of accounting, control and economic analysis of the movement of finished products and their implementation.The theoretical aspects of accounting and control of the movement of finished products and their realization are considered in this work, namely: concept, classification, evaluation; features of documentary design; issues of analytical and synthetic accounting, aspects of control and analysis.The organizational and economic activity of "Fores" LLC, an active model of accounting and control of finished product movement and its implementation is analyzed. The ways of improving the accounting and control of the movement of finished products and their implementation are offered.
Мельник, Наталія Ігорівна. "Облік та аналіз руху готової продукції на ПрАТ «УКРГРАФІТ»." Магістерська робота, 2021. https://dspace.znu.edu.ua/jspui/handle/12345/5371.
Full textUA : Кваліфікаційна робота: 124 с., 3 розділи, 11 табл., 18 рис., 3 додатка, 64 джерела. Об’єкт дослідження процес ведення бухгалтерського обліку та аналіз реалізації готової продукції на ПрАТ «УКРГРАФІТ». Метою кваліфікаційної роботи є наукове обґрунтування теоретичних положень і розроблення практичних рекомендацій щодо вдосконалення обліку та аналіз ефективності використання готової продукції на ПрАТ «УКРГРАФІТ». Методи дослідження: індукції та дедукції; методи теоретичного узагальнення та порівняння, групування; абстрактно-логічний метод та метод причинно-наслідкових зв’язків; методи аналогії, аналізу та синтезу, порівняння; графічний метод. Наукова новизна одержаних результатів полягає в обґрунтуванні теоретичних та методичних положень і розробці практичних рекомендацій щодо вдосконалення обліку та аналіз готової продукції для забезпечення інтересів користувачів у сучасних економічних умовах. Основні результати, що відображають наукову новизну дослідження, полягають у такому: удосконалено: − структура інформаційного забезпечення управління доходами від реалізації готової продукції, яка дозволить скоротити витрати на ведення обліку, забезпечить цінність та непереривність всієї облікової інформації, скласти бухгалтерську (фінансову) звітність, адекватно відображувану результати діяльності організації для зацікавлених груп користувачів. набули подальшого розвитку: − зміст сутності трактування терміну «готова продукція», як економічної категорії для потреб бухгалтерського обліку, щоб досягти єдності в термінології, тобто – це речовинна продукція, виконані роботи і надані послуги; − порядок синтетичного та аналітичного обліку шляхом відкриття субрахунків 26/1 «Основна продукція», 26/2 «Супутня продукція», 26/3 «Побічна продукція», а також 26/4 «Повернення продукції в суму доходу», 26/5 «Повернення продукції по фактичній собівартості», 26/6 «Списання повернення», що дозволить спростити й уніфікувати порядок складання кореспонденції рахунків по відображенню повернення продукції та це у свою чергу дозволить підвищити якість та оперативність обліково-аналітичної інформації; − пропозиції щодо зниження резервів собівартості продукції за рахунок недозволенності перевиплат по окремих статтям витрат та загальновиробничих і загальногосподарських витрат, а також переведення в дію резервів збільшення виробництва валової продукції і зниження собівартості, які оказані виробництву, що дасть можливість підвищити виробництво і реалізацію промислової продукції. Отримані результати дослідження спрямовані на підвищення достовірності та оперативності обліку готової продукції та можуть використовуватися при розробці нормативних матеріалів з бухгалтерського обліку та аналізу.
EN : Qualifying work contains 124 pp., 3 sections, 11 tab., 18 fig., 3 annex, 64 references. The object of research is the process of accounting and analysis of sales of finished products at PJSC "UKRGRAFIT". The purpose of the qualification work is the scientific substantiation of theoretical provisions and the development of practical recommendations for improving the accounting and analysis of the effectiveness of the use of finished products at PJSC "UKRGRAFIT". Research methods: inductions and deductions; methods of theoretical generalization and comparison, grouping; abstract-logical method and the method of causal relations; methods of analogy, analysis and synthesis, comparison; graphic method. The scientific novelty of the obtained results lies in the substantiation of theoretical and methodological provisions and the development of practical recommendations for improving the accounting and analysis of finished products to ensure the interests of users in modern economic conditions. The main results, reflecting the scientific novelty of the study, are as follows: improved: - the structure of information support for the management of revenues from sales of finished products, which will reduce accounting costs, ensure the value and continuity of all accounting information, prepare accounting (financial) statements that adequately reflect the results of the organization for stakeholders. have been further developed: - the essence of the interpretation of the term "finished product" as an economic category for accounting purposes to achieve unity in terminology, ie - it is a tangible product, work performed and services rendered; - the order of synthetic and analytical accounting by opening sub-accounts 26/1 "Main products", 26/2 "Related products", 26/3 "By-products", as well as 26/4 "Return of products in the amount of income", 26/5 Return of products at actual cost ", 26/6" Write-off of return ", which will simplify and unify the procedure for compiling correspondence accounts to reflect the return of products and this in turn will improve the quality and efficiency of accounting and analytical information; - proposals to reduce production cost reserves due to the inadmissibility of overpayments on certain items of expenditure and overhead and overhead costs, as well as the transfer of reserves to increase gross output and reduce costs, which are provided to production, which will increase production and sales. The results of the study are aimed at improving the reliability and efficiency of accounting for finished products and can be used in the development of regulatory materials for accounting and analysis.
Гуразда, Дар’я Олександрівна. "Організація обліку готової продукції та аналіз її реалізації на ТОВ «Провайд-Р»." Магістерська робота, 2021. https://dspace.znu.edu.ua/jspui/handle/12345/5376.
Full textUA : Кваліфікаційна робота: 110 стор., 3 розділи, 24 табл., 29 рис., 2 додатка, 65 джерел. Об’єкт дослідження – процес обліку та аналізу готової продукції на підприємстві. Метою написання кваліфікаційної роботи є дослідження обліку та аналізу готової продукції на підприємстві та формування організаційно-методичних положень та практичних рекомендацій щодо їх оптимізації. Методи дослідження: в процесі виконання кваліфікаційної роботи були проведені дослідження на теоретичному та практичному рівнях пізнання. Для досягнення мети дослідження були застосовані наступні методи: табличний метод (при систематизації теоретичної інформації, що стосується структури руху і реалізації готової продукції та узагальненні основних показників, що характеризують ефективність діяльності підприємства, зокрема обсяги випуску та реалізації продукції), методи аналізу й синтезу (при детальному вивченні загального фінансово-господарського стану підприємства, тощо), метод порівняння (при оцінці діяльності підприємства, визначення відхилення від планових показників, встановлення їх причини та виявлення резервів) методи оцінки: горизонтальний, вертикальний аналізи (при аналізі складу та структури товарообігу у розрізі основних товарних груп), порівняльний аналіз (при аналізі динаміки товарообігу виробництва та реалізації продукції), факторний аналіз (при визначенні кількісного впливу економічних показників на зміну об’ємних показників). Результати та значимість роботи полягають у розробці організаційно та методичних положень щодо вдосконалення обліку та аналізу руху та реалізації готової продукції на підприємстві у сучасних умовах, зокрема: удосконалено: – документальне забезпечення операцій з обліку готової продукції в частині формування графіка документообігу, що дозволить отримати інформацію про операції з руху готової продукції в розрізі інформаційних запитів управлінської системи; – аналітичний облік витрат на збут на підставі застосування аналітичних рахунків в залежності від комплексних заходів збутової діяльності підприємства, що сприятиме збільшенню можливостей використання облікових даних з метою оптимізації процесу реалізації готової продукції. Набули подальшого розвитку: – трактування поняття «готова продукція», яку доцільно розглядати як частину запасів підприємства, що була вироблена ним самостійно (на підставі затверджених нормативів та технічних стандартів) з метою подальшої її реалізації покупцям; – підхід до оцінки взаємозв’язку фінансового результату від реалізації готової продукції з понесеними витратами на виробництво та визначеними факторами впливу на результати діяльності підприємства, що дає змогу промисловим підприємствам знайти шляхи оптимізації основних показників.
EN : The qualification work contains 110 p., 3 sections, 24 tab., 29 fig., 2 annex, 65 references. The object of research is the process of accounting for analyzing the movement of finished products and its realization in the enterprise. The purpose of writing the qualification work is the formation of organizational and methodological regulations and practical recommendations on optimization of accounting and analysis of the movement and realization of finished products. Research methods: during the implementation of the qualification work, studies were conducted on the theoretical and practical levels of cognition. To achieve the research goal, the following methods were applied: the tabular method (with the systematization of theoretical information relating to the structure of the movement and the realization of finished products and the generalization of the main indicators characterizing the efficiency of the enterprise, in particular, the volumes of production and sale of products), methods of analysis and synthesis (with a detailed study of the overall financial and economic state of the enterprise, etc.), the comparison method (when assessing the activities of the enterprise, determining deviations from targets, determining their cause and identifying reserves). Evaluation methods: horizontal, vertical analysis (in analyzing the composition and structure of commodity turnover in the context of the main commodity groups), comparative analysis (in analyzing the dynamics of turnover of production and sales of products), factor analysis (in determining the quantitative impact of economic indicators on the change in volume indicators). The results and significance of the work are the development of organizational and methodological provisions for improving the accounting and analysis of the movement and sale of finished products in the enterprise in modern conditions, in particular: improved: documentary support of operations on accounting of finished goods in the part of forming the schedule of workflow, which will allow to obtain information about operations on the movement of finished goods in the context of information requests of the management system; analytical accounting of marketing expenses on the basis of application of analytical accounts depending on complex measures of marketing activity of the enterprise, which will help to increase the possibilities of using accounting data in order to optimize the process of selling finished products. Have received the further development: interpretation of the concept of «finished products», which it is advisable to consider as part of the stocks that was manufactured at the enterprise in accordance with established standards and technical standards for the purpose of further realization to the customer-buyer; approach to the evaluation of the relationship between the financial result and the sale of finished goods with incurred production costs and certain factors of influence on the results of the enterprise's activities, which allows industrial enterprises to find ways to optimize the main indicators.
Возняк, Я. С. "Теоретичні і практичні аспекти обліку та контролю стану і руху готової продукції." Thesis, 2020. http://dspace.oneu.edu.ua/jspui/handle/123456789/12052.
Full textThe work deals with theoretical aspects of accounting and control of the condition and movement of finished products and identifies problematic issues of accounting for the formation of financial results from sales of finished products at the present stage of entrepreneurship development in Ukraine . Author analysis main performance indicators, profitability of Limited Liability Company "POLANK-PLUS", dynamics of production, the impact of factors on sales, as well as the peculiarities of the methods of accounting, control and audit, developed at the enterprise. It is proposed to detail the products for various reasons of return and income from its sale on special sub-accounts of the second order, development and implementation of the Order on the organization of accounting order and accounting policy, etc.
Суворова, А. О. "Управління збутовою діяльністю ТОВ "Наш продукт плюс"." Thesis, 2020. http://dspace.oneu.edu.ua/jspui/handle/123456789/11767.
Full textБеседовська, А. В. "Облік, аналіз та внутрішній контроль випуску та реалізації готової продукції (на прикладі ТОВ «МЕД-ОК)." Thesis, 2019. http://dspace.oneu.edu.ua/jspui/handle/123456789/11016.
Full textQualification work consists of three chapters. Object of study is the process accounting, analysis and internal control of finished products and sales of this. Diploma thesis deals with theoretical aspects of accounting, analysis and internal control of finished products and its realization are considered in the paper. The organization of accounting and inventory of finished products, objects and procedures of internal control of finished products of MED-OK LLC is analyzed. The factors and reserves of reconciliation and the work of the finished case at the research enterprise have been identified. A methodology for internal control of sales of finished products was developed taking into account the specifics of the industry.