Academic literature on the topic 'Solar thermal concentrator'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Solar thermal concentrator.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Solar thermal concentrator"
M.V, Bindu, and Herbert Joselin. "Enhancement of Thermal Performance of Solar Parabolic Trough Concentrator-Techniques- Review." Bonfring International Journal of Industrial Engineering and Management Science 9, no. 3 (September 30, 2019): 16–20. http://dx.doi.org/10.9756/bijiems.9033.
Full textNikitin, Victor, Roman Zaitsev, Tatiana Khramova, and Alina Khrypunova. "DEVELOPMENT OF A FACETED CONCENTRATOR FOR A COMBINED PHOTOVOLTAIC PLANT." Energy saving. Power engineering. Energy audit., no. 5-6(171-172) (November 30, 2022): 47–58. http://dx.doi.org/10.20998/2313-8890.2022.05.04.
Full textThirunavukkarasu, V., and M. Cheralathan. "Thermal Performance of Solar Parabolic Dish Concentrator with Hetero-Conical Cavity Receiver." Applied Mechanics and Materials 787 (August 2015): 197–201. http://dx.doi.org/10.4028/www.scientific.net/amm.787.197.
Full textPORTELA, Lino Wagner Castelo Branco, Ana Fabíola Leite ALMEIDA, Erilson de Sousa BARBOSA, Kleber Lima CEZAR, and Patrick Abreu OLIVEIRA. "ENERGY ANALYSIS AND PERFORMANCE OF A PARABOLIC CYLINDRICAL SOLAR COLLECTOR AIDED BY SOLAR TRACKING SYSTEM." Periódico Tchê Química 17, no. 34 (March 20, 2020): 53–61. http://dx.doi.org/10.52571/ptq.v17.n34.2020.71_p34_pgs_53_61.pdf.
Full textUllah, Fahim, Mansoor K. Khattak, and Kang Min. "Experimental investigation of the comparison of compound parabolic concentrator and ordinary heat pipe-type solar concentrator." Energy & Environment 29, no. 5 (February 21, 2018): 770–83. http://dx.doi.org/10.1177/0958305x18759791.
Full textGhazouani, Karima, Safa Skouri, Salwa Bouadila, and Amenallah Guizani. "Thermal Study of Solar Parabolic Concentrator." IOSR Journal of Mechanical and Civil Engineering 16, no. 053 (December 2016): 118–23. http://dx.doi.org/10.9790/1684-1605304118123.
Full textPanchenko, Vladimir. "Photovoltaic Thermal Module With Paraboloid Type Solar Concentrators." International Journal of Energy Optimization and Engineering 10, no. 2 (April 2021): 1–23. http://dx.doi.org/10.4018/ijeoe.2021040101.
Full textGandhe, V. B., A. Venkatesh, and V. Sriramulu. "Thermal analysis of an FMDF solar concentrator." Solar & Wind Technology 6, no. 3 (January 1989): 197–202. http://dx.doi.org/10.1016/0741-983x(89)90069-6.
Full textBarbosa, Flávia V., João L. Afonso, Filipe B. Rodrigues, and José C. F. Teixeira. "Development of a solar concentrator with tracking system." Mechanical Sciences 7, no. 2 (November 17, 2016): 233–45. http://dx.doi.org/10.5194/ms-7-233-2016.
Full textAl Imam, Md Forhad Ibne, Rafiqul Alam Beg, and Shamimur Rahman. "Thermal Performance Improvement Study of a Solar Collector with Compound Parabolic Concentrator." European Journal of Engineering Research and Science 3, no. 11 (November 30, 2018): 78–82. http://dx.doi.org/10.24018/ejers.2018.3.11.970.
Full textDissertations / Theses on the topic "Solar thermal concentrator"
Coventry, Joseph Sydney, and Joe Coventry@anu edu au. "A solar concentrating photovoltaic/thermal collector." The Australian National University. Faculty of Engineering and Information Technology, 2004. http://thesis.anu.edu.au./public/adt-ANU20041019.152046.
Full textBerryman, Ian. "Optimisation, design, development, and trial of a low-cost solar oven with novel concentrator geometry." Thesis, University of Oxford, 2016. https://ora.ox.ac.uk/objects/uuid:42de9b33-18e1-4f22-8a44-3ddfd532bd0b.
Full textŠumić, Mersiha. "Thermal Performance of a Solarus CPC-Thermal Collector." Thesis, Högskolan Dalarna, Energi och miljöteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:du-14526.
Full textChow, Simon Ka Ming. "Integration of High Efficiency Solar Cells on Carriers for Concentrating System Applications." Thèse, Université d'Ottawa / University of Ottawa, 2011. http://hdl.handle.net/10393/19932.
Full textMuron, Aaron C. D. "Field Installation of a Fully Instrumented Prototype Solar Concentrator System: Thermal and Photovoltaic Analysis." Thesis, Université d'Ottawa / University of Ottawa, 2013. http://hdl.handle.net/10393/26245.
Full textOliveira, Junior Gilberto Bueno de [UNESP]. "Construção e avaliação térmica de um sistema concentrador parabólico com seguidor solar." Universidade Estadual Paulista (UNESP), 2015. http://hdl.handle.net/11449/133981.
Full textApproved for entry into archive by Ana Paula Grisoto (grisotoana@reitoria.unesp.br) on 2016-02-05T11:29:33Z (GMT) No. of bitstreams: 1 oliveirajunior_gb_me_bauru.pdf: 5444637 bytes, checksum: 24e8c86834b9e8a8354dc9e314104039 (MD5)
Made available in DSpace on 2016-02-05T11:29:33Z (GMT). No. of bitstreams: 1 oliveirajunior_gb_me_bauru.pdf: 5444637 bytes, checksum: 24e8c86834b9e8a8354dc9e314104039 (MD5) Previous issue date: 2015-12-18
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
The searching for renewable energy sources has mobilized much of the scientific community, which work is tireless in pointing out feasible solutions to use clean energy. Solar energy is natural choice among others, because its availability and amount. A known way to use this energy is by focusing solar rays through parabolics, which allow rays concentration to a small area. The advantage of this type of project is to produce thermal energy at high temperatures. This energy has a wide application on producing other forms of energy such as electric power in turbines since solar concentrators provide steam at high pressure and temperature. The goal of this study is to build a solar concentration device and measure the energy produced, as well its efficiency in transformation. Thus, was built up a parabolic concentrator and a solar tracker to motion in three dimension, which allows device alignment towards incidence of solar rays. Was utilized a pumping system to flowing thermal fluid at high temperatures through the absorber. The energy balance of this thermal fluid, led to obtain behavior curves of net power and system efficiency. The experimental was divided in two parts. On the first one, was obtained the stagnation temperature and the other one, was measured the eficiency over a circulating thermal fluid. The stagnation temperature measured in december was 476,5°C, at 4:25PM. The second part of tests has shown an efficiency of 33% on first one assay. However when was utilizing another form to measure the solar irradiation (theoretic approach), the efficiency rises between 45% to 55%, regarding steady state conditions. Furthermore, this work allowed discussions to discover ways to increase the energy efficiency.
A busca por formas alternativas de energia tem mobilizado grande parte da comunidade científica, cujos trabalhos são incansáveis em apontar soluções viáveis para o aproveitamento das energias renováveis e limpas. A energia solar se destaca dentre todas pela sua disposição e quantidade. Uma forma já conhecida de sua utilização é através da concentração em sistemas parabólicos, que permitem o direcionamento dos raios do Sol para uma pequena área. A vantagem deste tipo de projeto é a produção de energia térmica a altas temperaturas e pressões. Essa energia concentrada possui grande aplicação, pois permite a conversão eficiente em energia elétrica, produzidas em turbinas a vapor. O objetivo deste trabalho foi construir um dispositivo termo-eletrônico para concentração solar e, com isso, quantificar a energia produzida, bem como sua eficiência. Assim sendo, foi construído um concentrador parabólico e um rastreador solar com movimento tridimensional, que permite o alinhamento do equipamento com a incidência dos raios do Sol. Foi utilizado ainda, para circulação no interior do absorvedor, um sistema de bombeamento de fluido térmico de alto ponto de ebulição e que não sofria deformação a altas temperaturas. O balanço energético no dispositivo permitiu obter as curvas de potência útil e da eficiência do sistema. O experimento foi dividido em duas partes. Na primeira parte, foi obtida a temperatura de estagnação e na outra parte, foi medida a eficiência energética sobre o fluido térmico em circulação. A temperatura de estagnação medida em dezembro foi de 476,5 °C, às 4:25 PM. A segunda parte dos testes mostrou uma eficiência de 33% no primeiro ensaio. No entanto, quando se utilizou uma outra forma de medir a irradiação solar (abordagem teórica), a eficiência aumentou, permanecendo entre 45% a 55%, considerando regime permanente. Além disso, possibilitou a discussão de formas de incrementar a sua eficiência.
Capes: 2012/2014
Rodríguez, Alvarado Juan Fernando. "Validation of a numerical model for the analysis of thermal-fluid behavior in a solar concentrator vessel." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/59936.
Full textCataloged from PDF version of thesis.
Includes bibliographical references (p. 44).
The need for innovation in the renewable energy sector is an ever-growing concern. With national-level disasters in the Gulf of Mexico, the necessity to begin the drive to develop effective and practical alternative energy sources becomes a more pressing concern. The CSPond project is an attempt to design a more simple solar thermal energy generation system that additionally addresses the intermittence issue. The CSPond system calls for a large container in which special salt mixtures are molten by solar thermal energy. The large container also acts as a thermal energy storage to address the intermittence issue that has held back the widespread application of solar energy systems. This thesis presents a validation analysis of a numerical simulation of a molten salt system. The simulation is part of a larger design effort to develop a viable solar thermal energy option which incorporates short to medium-term thermal storage. To validate the numerical model, a scaled version of the proposed solar vessel was used in the solar simulator built by Professor Slocum's PERG to simulate normal operation procedures. This data was then compared to the numerical simulations. This comparison found that the numerical simulation does not capture the dynamics of the temperature rise in the system, but that it does capture the Rayleigh-Taylor instabilities, characteristic of convection. Solutions to the issues identified above are proposed and analyzed. These include the consideration of several modes of thermal interactions with the environment, the optical interactions between the solar beam and the molten salt medium, modifying the boundary conditions and finally, including the temperature of all relevant thermophysical properties to better capture the convective behavior of the molten salt system.
by Juan Fernando Rodríguez Alvarado.
S.B.
Avallone, Elson [UNESP]. "Estudo de um coletor solar, tipo tubo evacuado modificado, utilizando um concentrador cilíndrico parabólico (CPC)." Universidade Estadual Paulista (UNESP), 2017. http://hdl.handle.net/11449/152135.
Full textSubmitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-22T14:07:00Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-22T18:09:14Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-22T18:12:24Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-22T19:44:22Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-23T11:57:14Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-23T12:57:55Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-23T13:16:31Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-23T13:34:44Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-23T17:24:55Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-23T17:29:01Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-24T12:05:24Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-24T12:39:44Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-24T16:47:38Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-24T17:31:22Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-27T11:40:50Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-27T12:31:52Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Submitted by ELSON AVALLONE null (elson.avallone@yahoo.com.br) on 2017-11-27T13:03:15Z No. of bitstreams: 1 VERSÃO FINAL.pdf: 8939449 bytes, checksum: d3102d236ab9125097867c5c875ded25 (MD5)
Approved for entry into archive by Maria Marlene Zaniboni null (zaniboni@bauru.unesp.br) on 2017-11-27T13:29:57Z (GMT) No. of bitstreams: 1 avallone_e_te_bauru_par.pdf: 1740865 bytes, checksum: 52bbabae7939012196c7f0891f214b58 (MD5)
Made available in DSpace on 2017-11-27T13:29:57Z (GMT). No. of bitstreams: 1 avallone_e_te_bauru_par.pdf: 1740865 bytes, checksum: 52bbabae7939012196c7f0891f214b58 (MD5) Previous issue date: 2017-10-30
As alterações climáticas tem fomentado a busca por fontes renováveis de energia. Assim, novos coletores solares têm sido o foco de pesquisadores em todo o mundo para novos concentradores, novas configurações de instalação e o estudo da estratificação térmica para melhorar o desempenho do sistema de armazenamento térmico. O sistema proposto, ou seja, utilizando concentrador solar com tubo evacuado, proporciona linearidade e constância na sua eficiência em relação aos coletores de placas planas. A alteração proposta, ou seja, tubo com duas aberturas, uma para entrada do líquido frio e outra para saída do líquido aquecido, elimina a interface física entre a água quente na região voltada para o fluxo de calor solar e a água fria na região inferior do tubo. Essa alteração provoca redução na eficiência térmica, porém aumenta o volume de água aquecida por dia. O concentrador CPC mostrou-se um importante equipamento do sistema, uma vez que a os raios solares incidem em uma região longitudinal definida no tubo coletor solar, direcionado pela geometria do CPC. Com a utilização desse equipamento elimina-se a necessidade de espelhos com seguidores solares, tornando o sistema vulnerável a oscilações elétricas, encarecendo o projeto e consumindo energia elétrica. O desempenho do coletor é avaliado a partir de testes experimentais utilizando a Primeira Lei da Termodinâmica como análise da eficiência. Esses resultados são comparados aos conceitos teóricos descritos na literatura científica. O espaço anular evacuado do tubo também se mostrou um importante aliado na linearidade do coletor, reduzindo a resistência térmica do ar. A estratificação térmica é avaliada tanto pelo número de MIX (Primeira Lei da Termodinâmica) como pela proposta de um novo coeficiente de estratificação utilizando a exergia (Segunda Lei da Termodinâmica). Das seis configurações propostas para o sistema estudado, a mais viável foi obtida na configuração 3, ou seja, tubo evacuado com CPC.
Climate change has encouraged the search for renewable energy sources. Thus, new solar collectors have been the focus of researchers around the world with new hubs, new installation settings and the study of thermal stratification to improve the performance of the thermal storage system. The proposed system, ie using evacuated tube solar concentrator provides linearity and stability of efficiency compared to flat plate collectors. The proposed change, i.e. a tube with two openings, one for cold liquid inlet and the other for hot liquid outlet, eliminates the physical interface between the hot water in the region facing the solar heat flow and the cold water in the lower region of the tube. This change causes a reduction in thermal efficiency, however increases the volume of water heated per day. Two radiometers were also developed, one thermal and the other optical, and the thermal radiometer was chosen because it had a similar behavior to the solar collectors, thus reducing the cost of the experimental bench. The CPC concentrator proved to be important equipment, once the concentration of sunlight focus on a longitudinal region defined in the solar collector tube, directed by the CPC geometry. Using this equipment eliminates the need for mirrors with solar trackers, making the system vulnerable to electrical oscillations, making the project more expensive and consuming electricity. The collector performance is evaluated from experimental tests using the First Law of Thermodynamics as an efficiency analysis. These results are compared to the theoretical concepts described in the scientific literature. The annular evacuated space in the tube also proved to be an important ally in the linearity of the collector, reducing the thermal resistance of the air. Thermal stratification is evaluated both by the MIX number (First Law of Thermodynamics) and by the proposal of a new stratification coefficient using exergy (Second Law of Thermodynamics). Of the six configurations proposed the most efficient was obtained in the complete configuration, i.e. evacuated tube with CPC.
Morfeldt, Johannes. "Optically Selective Surfaces in low concentrating PV/T systems." Thesis, Örebro University, School of Science and Technology, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-7396.
Full textOne of the traditional approaches to reduce costs of solar energy is to use inexpensive reflectors to focus the light onto highly efficient solar cells. Several research projects have resulted in designs, where the excess heat is used as solar thermal energy.
Unlike a solar thermal system, which has a selective surface to reduce the radiant heat loss, a CPV/T (Concentrating PhotoVoltaic/Thermal) system uses a receiver covered with solar cells with high thermal emittance.
This project analyzes whether the heat loss from the receiver can be reduced by covering parts of the receiver surface, not already covered with solar cells, with an optically selective coating. Comparing different methods of applying such a coating and the long-term stability of low cost alternatives are also part of the objectives of this project.
To calculate the heat loss reductions of the optically selective surface coating a mathematical model was developed, which takes the thermal emittances and the solar absorptances of the different surfaces into account. Furthermore, a full-size experiment was constructed to verify the theoretical predictions.
The coating results in a heat loss reduction of approximately 20 % in such a CPV/T system and one of the companies involved in the study is already changing their design to make use of the results.
Wannemo, John. "Zero CO2 factory : Energikartläggning av industrier och ett exempel på hur noll utsläpp nås." Thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-160486.
Full textThe industry sector accounts for 32% of the global energy usage where the majority of the energy is being used as heat. Most of the heat is generated by burning fossil fuels which leads to heat use being the largest source of emissions in the sector. About half of energy used as in the industries are in temperatures up to 400 °C which is suitable for heat provided by solar collectors.The apparel industry accounts for 10% of the global carbon emissions and multiple of the industry processes used in textile production are in temperature ranges reachable with solar collectors such as Absolicons T160.Energy data was collected from textile factories and calculations of energy usage and emissions was made. The calculations for solar collectors was made with Absolicons web application Field Simulator. A 3-step plan was created to demonstrate how two textile factories in India could reach zero CO2 emissions.The analysis shows that the textile industry’s majority of energy is being used from fossil fuels to generate heat where the 5 largest factories in this report average energy is 85% as heat and 15% as electricity. The emissions per produced mass of goods in kg is an average of 6,1 kgCO2e at these 5 factories which is comparable to burning 2,1 kg of black coal.The two large textile factories combined emissions from energy usage is reported to be 686 ktCO2e. In the 3-step plan the heat usage is reduced by 17% and heat from fossil fuels are replaced by heat from solar collectors and biomass. To cover 68% of the new energy demand it would require solar fields with a total thermal capacity of about 400 MW and an area of 1,3 km2. The remaining 32% of heat demand would be covered by burning 100 000 tonne of biomass per year.The conclusion is that he industry sector has a huge potential of reducing their emissions by replacing fossil fuels for generating thermal energy by thermal energy from e.g. solar collectors or biomass. It will require available spaces close to or on top of the factories to be able cover large portions of the heat demand with solar collectors. The current prices of energy from fossil fuels is low compared to their emissions and a global carbon market or taxes should be applied to accelerate the change to clean energy and lower emissions.
Books on the topic "Solar thermal concentrator"
Piszczor, Michael F. A high-efficiency refractive secondary solar concentrator for high temperature solar thermal applications. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2000.
Find full textChandra, Laltu, and Ambesh Dixit, eds. Concentrated Solar Thermal Energy Technologies. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-4576-9.
Full textAlexander, Burt J., and Ted F. Richardson. Concentrating solar power: Data and directions for an emerging solar technology. Hauppauge, N.Y: Nova Science Publishers, 2011.
Find full textZacharopoulos, Aggelos. Optical design modelling and experimental characterisation of line-axis concentrators for solar photovoltaic and thermal applications. [s.l: The Author], 2001.
Find full textForum on New Materials (5th 2010 Montecatini Terme, Italy). New materials II: Thermal-to-electrical energy conversion, photovoltaic solar energy conversion and concentrating solar technologies : proceedings of the 5th Forum on New Materials, part of CIMTEC 2010, 12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 13-18, 2010. Stafa-Zurich, Switzerland: Trans Tech Publications, 2011.
Find full textJ, Trudell Jeffrey, and United States. National Aeronautics and Space Administration., eds. Thermal distortion analysis of the space station solar dynamic concentrator. [Washington, D.C.]: National Aeronautics and Space Administration, 1988.
Find full textA high-efficiency refractive secondary solar concentrator for high temperature solar thermal applications. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2000.
Find full textP, Macosko Robert, and NASA Glenn Research Center, eds. A high-efficiency refractive secondary solar concentrator for high temperature solar thermal applications. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2000.
Find full textA high-efficiency refractive secondary solar concentrator for high temperature solar thermal applications. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2000.
Find full textDerik, Ehresman, and United States. National Aeronautics and Space Administration., eds. Solar concentrator advanced development program: Final report. Melbourne, Fla: Harris Corporation, Government Aerospace Systems Division, 1989.
Find full textBook chapters on the topic "Solar thermal concentrator"
Leutz, Ralf, and Akio Suzuki. "Solar Thermal Concentrator Systems." In Springer Series in OPTICAL SCIENCES, 217–44. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-540-45290-4_11.
Full textLensch, G., P. Lippert, W. Rudolph, and A. Grychta. "Investigation and Selection of Materials Resistant to Temperatures and Radiation to Design and Construct a Ceramic/Metallic-Ceramic Secondary Concentrator." In Solar Thermal Energy Utilization, 221–68. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-52340-3_4.
Full textMahavar, Sunita, Ankit Goyal, and Boris V. Balakin. "Investigation of a Solar Concentrator for Water Distillation." In Advances in Thermal Engineering, Manufacturing, and Production Management, 209–17. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-2347-9_18.
Full textLensch, G., P. Lippert, and W. Rudolph. "Investigation and Selection of Materials Resistant to Temperatures and Radiation to Construct a Metallic/Ceramic Secondary Concentrator as well as Measurements at Premodels." In Solar Thermal Energy Utilization, 1–57. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-52342-7_1.
Full textSchöffel, U., and R. Sizmann. "Terminal Concentrator Assisted Solar Furnace Layout and Construction." In Solar Thermal Energy Utilization. German Studies on Technology and Application, 1–17. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-84799-8_1.
Full textBeltagy, Hani, Sofiane Mihoub, and Said Noureddine. "Thermal Behavior Study of a Fresnel Concentrator Solar Receiver." In Advances in Green Energies and Materials Technology, 25–31. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0378-5_4.
Full textXinian, Jiang, Ge Hongchun, Gao Hanshan, Sang Shiyu, and Zhou Xiaobo. "Performance Study on Solar Pv-Thermal Internal Concentrator Tube Collector." In Proceedings of ISES World Congress 2007 (Vol. I – Vol. V), 537–40. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-75997-3_97.
Full textGoetzberger, A., W. Bronner, and W. Wettling. "Efficiency of a Combined Solar Concentrator Cell and Thermal Power Engine System." In Tenth E.C. Photovoltaic Solar Energy Conference, 11–14. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3622-8_3.
Full textLi, Xin, Meimei Zhang, Zhifeng Wang, and Chun Chang. "The Experimental Analysis on Thermal Performance of a Solar Dish Concentrator." In Proceedings of ISES World Congress 2007 (Vol. I – Vol. V), 644–50. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-75997-3_119.
Full textChieli, Giulia, and Lucia Ceccherini Nelli. "Photovoltaic and Thermal Solar Concentrator Integrated into a Dynamic Shading Device." In Sustainable Building for a Cleaner Environment, 335–45. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-94595-8_28.
Full textConference papers on the topic "Solar thermal concentrator"
Bonometti, J., and C. Hawk. "Solar thermal concentrator." In 31st Joint Propulsion Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1995. http://dx.doi.org/10.2514/6.1995-2637.
Full textZweben, Carl. "Advanced thermal management materials for concentrator photovoltaic arrays." In SPIE Solar Energy + Technology, edited by Lori E. Greene and Raed A. Sherif. SPIE, 2010. http://dx.doi.org/10.1117/12.858599.
Full textStoynov, L. A., and Prasad K. D. V. Yarlagadda. "Development and Modification of a Cassegrainian Solar Concentrator for Utilization of Solar Thermal Power." In ASME 2003 International Solar Energy Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/isec2003-44071.
Full textWells, David N. "Low-Cost Solar Mirror Substrates and Geometries for Solar Thermal and Photovoltaic Concentrator Applications." In ASME 2001 Solar Engineering: International Solar Energy Conference (FORUM 2001: Solar Energy — The Power to Choose). American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/sed2001-102.
Full textGhazouani, Karima, Safa Skouri, Salwa Bouadila, and Aman Allah Guizani. "Thermal study of solar parabolic trough concentrator." In 2018 9th International Renewable Energy Congress (IREC). IEEE, 2018. http://dx.doi.org/10.1109/irec.2018.8362474.
Full textCastillo, Jose E., Juan M. Russo, Glenn A. Rosenberg, and Raymond K. Kostuk. "Thermal Effects of Holographic Planar Concentrator Regions in Photovoltaic Modules." In Optics for Solar Energy. Washington, D.C.: OSA, 2011. http://dx.doi.org/10.1364/ose.2011.srthb3.
Full textGiudicelli, Emmanuel, Nadia Martaj, Rachid Bennacer, Alain Dollet, Arnaud Perona, Sandrine Pincemin, and Yvan Cuminal. "Solar cells based on GaAs: Thermal behavior study." In 11TH INTERNATIONAL CONFERENCE ON CONCENTRATOR PHOTOVOLTAIC SYSTEMS: CPV-11. AIP Publishing LLC, 2016. http://dx.doi.org/10.1063/1.4931502.
Full textSardeshpande, V. R., and I. R. Pillai. "Solar Concentrator for Industrial Thermal Application-Indian Scenario." In Modelling and Simulation. Calgary,AB,Canada: ACTAPRESS, 2010. http://dx.doi.org/10.2316/p.2010.700-021.
Full textCui, Min, Nuofu Chen, Jinliang Wu, Lei Liu, Peng Wang, Yanshuo Wang, and Yiming Bai. "Thermal test and analysis of concentrator solar cells." In Photonics Asia 2007, edited by Yuwen Zhao, Nuofu Chen, Vladimir M. Andreev, Jai Singh, Jinmin Li, Ling Wu, Yubo Fan, Yong-Hang Zhang, and Michael E. Coltrin. SPIE, 2007. http://dx.doi.org/10.1117/12.755323.
Full textRiggs, Brian C., Richard E. Biedenharn, Chris Dougher, Yaping Vera Ji, Qi Xu, Vince Romanin, Daniel S. Codd, James M. Zahler, and Matthew D. Escarra. "Cost Competitive Concentrator Photovoltaics for Solar Thermal Applications." In 2017 IEEE 44th Photovoltaic Specialists Conference (PVSC). IEEE, 2017. http://dx.doi.org/10.1109/pvsc.2017.8366018.
Full textReports on the topic "Solar thermal concentrator"
Nene, Anita A., Solaisamy Ramachandran, and Sivalingam Suyambazhahan. Design and Analysis of Solar Thermal Energy Storage System for Scheffler Solar Concentrator. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, October 2019. http://dx.doi.org/10.7546/crabs.2019.10.03.
Full textGiebink, Noel C. Scattering Solar Thermal Concentrators. Office of Scientific and Technical Information (OSTI), January 2015. http://dx.doi.org/10.2172/1182608.
Full textTschoppa, Daniel, Zhiyong Tianb, Magdalena Berberichc, Jianhua Fand, Bengt Perersd, and Simon Furbo. LSEVIER paper: Large Scale Solar Thermal Systems in Leading Countries. IEA SHC Task 55, January 2020. http://dx.doi.org/10.18777/ieashc-task55-2020-0001.
Full textClayton, William R., and Paul A. Gierow. Inflatable Concentrators for Solar Thermal Propulsion. Fort Belvoir, VA: Defense Technical Information Center, January 1992. http://dx.doi.org/10.21236/ada412158.
Full textRenk, K., Y. Jacques, C. Felts, and A. Chovit. Holographic Solar Energy Concentrators for Solar Thermal Rocket Engines. Fort Belvoir, VA: Defense Technical Information Center, May 1988. http://dx.doi.org/10.21236/ada198807.
Full textGierow, Paul A. Fabrication of Thin Film Concentrators for Solar Thermal Propulsion Applications. Fort Belvoir, VA: Defense Technical Information Center, January 1991. http://dx.doi.org/10.21236/ada409327.
Full textMuralidharan, Govindarajan, Shivakant Shukla, Roger Miller, Donovan Leonard, Jim Myers, and Paul Enders. Cast Components for High Temperature Concentrated Solar Power Thermal Systems. Office of Scientific and Technical Information (OSTI), September 2022. http://dx.doi.org/10.2172/1890293.
Full textKumar, Vinod. Computational Analysis of Nanoparticles-Molten Salt Thermal Energy Storage for Concentrated Solar Power Systems. Office of Scientific and Technical Information (OSTI), May 2017. http://dx.doi.org/10.2172/1355304.
Full textO'Gallagher, J., and R. Winston. Performance and cost benefits associated with nonimaging secondary concentrators used in point-focus dish solar thermal applications. Office of Scientific and Technical Information (OSTI), September 1987. http://dx.doi.org/10.2172/5914593.
Full textYu, Wenhua, and Dileep Singh. Prototype Testing of Encapsulated Phase Change Material Thermal Energy Storage (EPCM-TES) for Concentrated Solar Power. Office of Scientific and Technical Information (OSTI), May 2019. http://dx.doi.org/10.2172/1512771.
Full text