Log in

Relevant bibliographies by topics / Software router / Journal articles

Journal articles on the topic 'Software router'

To see the other types of publications on this topic, follow the link: Software router.

Author: Grafiati

Published: 14 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Software router.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Nasir, M. H. M., N. A. M. Radzi, W. S. H. M. W. Ahmad, F. Abdullah, and M. Z. Jamaludin. "Comparison of router testbeds: embedded system-based, software-based, and multiprotocol label switching (MPLS)." Indonesian Journal of Electrical Engineering and Computer Science 15, no. 3 (September 1, 2019): 1250. http://dx.doi.org/10.11591/ijeecs.v15.i3.pp1250-1256.

Full text

Abstract:

<span>Multiprotocol Label Switching (MPLS) is a promising packet switching technology in the field of communication network, allowing router to forward the packets based on labels. However, off-the-shelves routers are made to be non-configurable, making it less suitable for academic research purposes. The aim of this paper is to explore the possibility of developing a configurable MPLS router by reviewing embedded system-based router, software-based router and commercial MPLS router itself. The architecture of the routers will be described in detail and their performances will be compared. From the analysis, we found that the development of reconfigurable MPLS router testbed is achievable by using embedded system-based hardware due to its freedom of reconfigurability.</span>

APA, Harvard, Vancouver, ISO, and other styles

2

Decasper, D., Z. Dittia, G. Parulkar, and B. Plattner. "Router plugins: a software architecture for next-generation routers." IEEE/ACM Transactions on Networking 8, no. 1 (2000): 2–15. http://dx.doi.org/10.1109/90.836474.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Decasper, Dan, Zubin Dittia, Guru Parulkar, and Bernhard Plattner. "Router plugins: a software architecture for next generation routers." ACM SIGCOMM Computer Communication Review 28, no. 4 (October 1998): 229–40. http://dx.doi.org/10.1145/285243.285285.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

ZHANG, Xiao-Ping. "Scalable Router." Journal of Software 19, no. 6 (October 21, 2008): 1452–64. http://dx.doi.org/10.3724/sp.j.1001.2008.01452.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Louati, Wajdi, Badii Jouaber, and Djamal Zeghlache. "Configurable software-based edge router architecture." Computer Communications 28, no. 14 (September 2005): 1692–99. http://dx.doi.org/10.1016/j.comcom.2005.02.014.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Supriyono, Abdul Rohman, and Yudi Prayudi. "LIVE FORENSICS ACQUISITION FILE SHARING SAMBA PADA MIKROTIK ROUTER OS." Cyber Security dan Forensik Digital 1, no. 1 (May 24, 2018): 7–13. http://dx.doi.org/10.14421/csecurity.2018.1.1.1210.

Full text

Abstract:

Smart Router is a router device that is equipped with Smart Wi-Fi software that allows us to easily manage and monitor the home network, and has more features or services than regular routers in general. Routers of this type include one solution in building a local area network that can be used as file server in file sharing. But regardless of the benefits it does not rule out the possibility of a crime by utilizing file sharing. Therefore, in the field of digital forensics required live forensic methods and live acquisitions, since the smart router belongs to a critical electronic item category, where data (log) can be lost when the device is turned off.

APA, Harvard, Vancouver, ISO, and other styles

7

Harizal, Bangun, Adnan Purwanto, and Wahyu Pamungkas. "Analisis Perancangan PC (Personal Computer) Router Proxy Untuk Menggabungkan Tiga Jalur Koneksi Di Indospeed." JURNAL INFOTEL - Informatika Telekomunikasi Elektronika 4, no. 1 (May 10, 2012): 29. http://dx.doi.org/10.20895/infotel.v4i1.99.

Full text

Abstract:

Router very important for computer network. To get the router can buy a router products but can also design your own using personal computers. Mikrotik is one of the router manufacturer that provides products in the form of hardware or software. If you want to pay less to design a router can use operating system Ubuntu. This operating system is open source and provided free of charge by the manufacturer. If you want to design a router with this OS can make use of personal computers are often used in homes or offices. Merging the performance of both types of routers can also be usedto cover the lack of one another. With the proxy on a local network then the use of bandwidth can be saved. Becausethere are several websites cached and stored therein if the same website is accessed by other users, the router transmits only from the proxy to the computerwhich make the request.

APA, Harvard, Vancouver, ISO, and other styles

8

Qie, Xiaohu, Andy Bavier, Larry Peterson, and Scott Karlin. "Scheduling computations on a software-based router." ACM SIGMETRICS Performance Evaluation Review 29, no. 1 (June 2001): 13–24. http://dx.doi.org/10.1145/384268.378425.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Spang, Bruce. "Updating the Theory of Buffer Sizing." ACM SIGMETRICS Performance Evaluation Review 49, no. 3 (March 22, 2022): 55–56. http://dx.doi.org/10.1145/3529113.3529131.

Full text

Abstract:

Internet routers have packet buffers which reduce packet loss during times of congestion. Sizing the router buffer correctly is important: if a router buffer is too small, it can cause high packet loss and link under-utilization. If a buffer is too large, packets may have to wait an unnecessarily long time in the buffer during congested periods, often up to hundreds of milliseconds. While an operator can reduce the operational size of a router buffer, the maximum size of a router buffer is decided by the router manufacturer, and the operator typically configures the router to use all the available buffers. Without clear guidance about how big a buffer needs to be, manufacturers tend to oversize buffers and operators tend to configure larger buffers than necessary, leading to increased cost and delay.

APA, Harvard, Vancouver, ISO, and other styles

10

Song, He, Xiaofeng Wang, Mengdong Zhai, and Guangjie Zhang. "High-Fidelity Router Emulation Technologies Based on Multi-Scale Virtualization." Information 11, no. 1 (January 16, 2020): 47. http://dx.doi.org/10.3390/info11010047.

Full text

Abstract:

Virtualization has the advantages of strong scalability and high fidelity in host node emulation. It can effectively meet the requirements of network emulation, including large scale, high fidelity, and flexible construction. However, for router emulation, virtual routers built with virtualization and routing software use Linux Traffic Control to emulate bandwidth, delay, and packet loss rates, which results in serious distortions in congestion scenarios. Motivated by this deficiency, we propose a novel router emulation method that consists of virtualization plane, routing plane, and a traffic control method. We designed and implemented our traffic control module in multi-scale virtualization, including the kernel space of a KVM-based virtual router and the user space of a Docker-based virtual router. Experiments show not only that the proposed method achieves high-fidelity router emulation, but also that its performance is consistent with that of a physical router in congestion scenarios. These findings provide good support for network research into congestion scenarios on virtualization-based emulation platforms.

APA, Harvard, Vancouver, ISO, and other styles

11

Liu, Jun Xian, Wei Zhang, Quan Zhi Zhou, Xiao Fang Lou, and Xu Fei. "Design and Implementation of Router Configuration Software in the Information System." Applied Mechanics and Materials 513-517 (February 2014): 1586–89. http://dx.doi.org/10.4028/www.scientific.net/amm.513-517.1586.

Full text

Abstract:

Due to the complexity of the router, its professional configuration leads to the phenomenon that operation and maintenance personnel of the information systems can not be competent for the configuration tasks. In order to lower the practitioner threshold of their operating and maintenance personnel, a WYSIWYG router configuration software in graphical interface needs to be developed. With the reduced quality requirements of employees, the main functions of the router configuration are achieved. This article describes the development and design of this kind of configuration software.

APA, Harvard, Vancouver, ISO, and other styles

12

Aligholipour, Rashid, Mohammad Baharloo, Behnam Farzaneh, Meisam Abdollahi, and Ahmad Khonsari. "TAMA." ACM Transactions on Embedded Computing Systems 20, no. 5 (July 2021): 1–24. http://dx.doi.org/10.1145/3462700.

Full text

Abstract:

Nowadays, static power consumption in chip multiprocessor (CMP) is the most crucial concern of chip designers. Power-gating is an effective approach to mitigate static power consumption particularly in low utilization. Network-on-Chip (NoC) as the backbone of multi- and many-core chips has no exception. Previous state-of-the-art techniques in power-gating desire to decrease static power consumption alongside the lack of diminution in performance of NoC. However, maintaining the performance and utilization of the power-gating approach has not yet been addressed very well. In this article, we propose TAMA (Turn-Aware Mapping & Architecture) as an effective method to boost the performance of the TooT method that was only powering on a router during turning pass or packet injection. In other words, in the TooT method, straight and eject packets pass the router via a bypass route without powering on the router. By employing meta-heuristic approaches (Genetic and Ant Colony algorithms), we develop a specific application mapping that attempts to decrease the number of turns through interconnection networks. Accordingly, the average latency of packet transmission decreases due to fewer turns. Also, by powering on turn routers in advance with lightweight hardware, the latency of sending packets diminishes. The experimental results demonstrate that our proposed approach, i.e., TAMA achieves more than 13% reduction in packet latency of NoC in comparison with TooT. Besides the packet latency, the power consumption of TAMA is reduced by about 87% compared to the traditional approach.

APA, Harvard, Vancouver, ISO, and other styles

13

Andreev, A. Yu. "Methodology for determining optimal routes in operational planning of road freight transport." Вестник гражданских инженеров 19, no. 1 (2022): 107–13. http://dx.doi.org/10.23968/1999-5571-2022-19-1-107-113.

Full text

Abstract:

The article presents a methodology for determining optimal routes in dynamically changing conditions of operational planning of road freight transport. The methodology consists of two main elements: theoretical software (router) and implementing software (routing protocol). It has unique properties, namely, the analytical apparatus of the router provides the possibility of choosing an effective action in the presence of stochastic uncertainty (when there is no information, which would guarantee the justified application of the well known laws of distribution of random variables). It works with an unlimited number of entries into the system, therefore, not only effective performance indicators of cars can and should be included in the databases of the studied data, but effective indicators of cargo handling facilities as well.

APA, Harvard, Vancouver, ISO, and other styles

14

Yin, Zuoning, Matthew Caesar, and Yuanyuan Zhou. "Towards understanding bugs in open source router software." ACM SIGCOMM Computer Communication Review 40, no. 3 (June 22, 2010): 34–40. http://dx.doi.org/10.1145/1823844.1823849.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Yau, D. K. Y., and Xiangjing Chen. "Resource management in software-programmable router operating systems." IEEE Journal on Selected Areas in Communications 19, no. 3 (March 2001): 488–500. http://dx.doi.org/10.1109/49.917709.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Aldaya, Ivan, Raul Cafini, Walter Cerroni, Carla Raffaelli, and Michele Savi. "Optical switch emulation in programmable software router testbed." Photonic Network Communications 25, no. 1 (November 22, 2012): 10–23. http://dx.doi.org/10.1007/s11107-012-0386-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Jun, Su, Krzysztof Przystupa, Mykola Beshley, Orest Kochan, Halyna Beshley, Mykhailo Klymash, Jinfei Wang, and Daniel Pieniak. "A Cost-Efficient Software Based Router and Traffic Generator for Simulation and Testing of IP Network." Electronics 9, no. 1 (December 27, 2019): 40. http://dx.doi.org/10.3390/electronics9010040.

Full text

Abstract:

The development was carried out using the Qt5.2 integrated development environment, which uses the programming language C++. The main advantage of this environment is that the code written in it can be compiled to different platforms (for example, Windows, Linux, Mac OS). A software router based on a modular architecture has been developed. It uses the socket technology, which allows forming a program-oriented packet network with any topology, including full-coupled topology. A network traffic generator to test the developed software router has been designed. We proposed a scheme to measure the packet processing time of a router using a specialized packet-capture network interface cards (NIC 1 and NIC 2) and a novel traffic generator installed on PC. Based on an experimental test bed we confirmed that our software router provides a cost-efficient alternative to the expensive, special hardware router CISCO 2801.

APA, Harvard, Vancouver, ISO, and other styles

18

Aweya, James. "On the design of IP routers Part 1: Router architectures." Journal of Systems Architecture 46, no. 6 (April 2000): 483–511. http://dx.doi.org/10.1016/s1383-7621(99)00028-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Sheng, Xin Ya, Yu Wang, Wei Ming Wang, and Jing Jing Zhou. "ForCES Architecture Router Models in OPNET." Advanced Materials Research 186 (January 2011): 433–37. http://dx.doi.org/10.4028/www.scientific.net/amr.186.433.

Full text

Abstract:

Open reconfigurable router (ForCES) is based on the separation of control parts and forwarding parts that can satisfy the open programmable request of the next generation router, and is the next generation router's development direction. At present, the research on ForCES architeture router has completed the system structure and interface standard protocol design, and realized the basic logic function blocks (LFBs) of the control element (CE) and forwarding element (FE), ForCES prototypemachine has also succeeded in operation. However, the performance of any software and protocol must be inspected. Performance evaluation can adopt queuing theory、random Petri nets、 stochastic process algebra and OPNET software, etc. OPNET with user-friendly interface and stratified modeling thought can simplify the process of modeling, clear modeling methodology. The paper adopts OPNET Modeler simulation software to study on ForCES architecture router performance.

APA, Harvard, Vancouver, ISO, and other styles

20

Appenzeller, Guido, Isaac Keslassy, and Nick McKeown. "Sizing router buffers." ACM SIGCOMM Computer Communication Review 34, no. 4 (August 30, 2004): 281–92. http://dx.doi.org/10.1145/1030194.1015499.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

LI, De-Quan. "Router Numbering Based Adaptive Packet Marking." Journal of Software 18, no. 10 (2007): 2652. http://dx.doi.org/10.1360/jos182652.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Spalink, Tammo, Scott Karlin, Larry Peterson, and Yitzchak Gottlieb. "Building a robust software-based router using network processors." ACM SIGOPS Operating Systems Review 35, no. 5 (December 2001): 216–29. http://dx.doi.org/10.1145/502059.502056.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Fernández, Carolina, Sergio Giménez, Eduard Grasa, and Steve Bunch. "A P4-Enabled RINA Interior Router for Software-Defined Data Centers." Computers 9, no. 3 (September 2, 2020): 70. http://dx.doi.org/10.3390/computers9030070.

Full text

Abstract:

The lack of high-performance RINA (Recursive InterNetwork Architecture) implementations to date makes it hard to experiment with RINA as an underlay networking fabric solution for different types of networks, and to assess RINA’s benefits in practice on scenarios with high traffic loads. High-performance router implementations typically require dedicated hardware support, such as FPGAs (Field Programmable Gate Arrays) or specialized ASICs (Application Specific Integrated Circuit). With the advance of hardware programmability in recent years, new possibilities unfold to prototype novel networking technologies. In particular, the use of the P4 programming language for programmable ASICs holds great promise for developing a RINA router. This paper details the design and part of the implementation of the first P4-based RINA interior router, which reuses the layer management components of the IRATI Linux-based RINA implementation and implements the data-transfer components using a P4 program. We also describe the configuration and testing of our initial deployment scenarios, using ancillary open-source tools such as the P4 reference test software switch (BMv2) or the P4Runtime API.

APA, Harvard, Vancouver, ISO, and other styles

24

Jevtić, Radoje, and Ivana Janković. "Exposure of the students of the secondary school of electrical engineering "Nikola Tesla" to wireless electromagnetic radiation." Zdravstvena zastita 51, no. 4 (2022): 106–23. http://dx.doi.org/10.5937/zdravzast2204106j.

Full text

Abstract:

Introduction/Aim: Wireless electromagnetic radiation from routers is an everyday occurrence in the life and work of modern man. They are widely used in many professional, public and domestic facilities, which means that people of all ages can be constantly exposed to electromagnetic radiation from these devices. The aim of this study was to determine the electric field strength, the magnetic field strength, and the electromagnetic exposure of students in different laboratories of the Secondary School "Nikola Tesla", depending on the type of routers installed in them, as well as to check some of the obtained results with the help of the appropriate software program of high-frequency (High-Frequency Simulation Software - HFFSS) for the simulation of electromagnetic radiation through different environments. Methods: Measurements of electric and magnetic field strength, as well as electromagnetic exposure, were carried out using the measuring instrument Spectran HF 60105, on four different types of routers installed in four laboratories of the Secondary School of Electrical Engineering "Nikola Tesla" in Niš. Measurements were realized on each router, through five horizontal and five vertical positions, with a distance of 45o in relation to the horizontal and normal axis of the router, and with spaces of 1 cm, which gives a total number of one thousand measurements. Results: The measured results obtained on four different routers that operated at a frequency of 2.4 GHz for the electric field strength (measured in millivolts per meter), magnetic field strength (measured in microampere per meter) and electromagnetic exposure (in microWatts per square centimeter) were below the limit values defined by standards. The achieved results were verified only for the router TL-WR841HP with the help of HFSS for the simulation of electromagnetic radiation through different environments. The result of the simulation check practically confirms the reliability of the measured results for TL-WR841HP router. Conclusion: Measuring and monitoring electromagnetic radiation is a very important task aimed at preserving and improving the quality of the working and living environment, as well as the quality of life and health of people and children. Software programs for the simulation of electromagnetic radiation can be used when it is not possible to carry out experimental measurements due to technical problems, hindered access to the device, danger of excessive radiation or some other reasons.

APA, Harvard, Vancouver, ISO, and other styles

25

Kim, Ku-Hwan, Hoang-Linh To, Won-Joo Hwang, and Jung-Tae Lee. "Infinite Queue Management via Cascade Control for Industrial Routers in Smart Grid IP Networks." Scientific Programming 2016 (2016): 1–10. http://dx.doi.org/10.1155/2016/5796907.

Full text

Abstract:

Smart grid applications experience an extremely wide range of communication delay. Data flows of those applications are normally aggregated at industrial network routers in substations, form infinite (long) queues termed bufferbloat issue, and might damage the operation of transmission control protocol. The default queue management scheme, DropTail, in such routers just drops packets if queue is full while the others in literature are mostly based on one-loop feedback control where an optimal point of performance between queue length and drop rate is limited. In this paper, we study the problem of managing a long queue of industrial router at substation under heterogeneous smart grid networks. Specifically, we propose an enqueue-dequeue dropping cascade control using a two-loop design method to control both window size and queue length. Moreover, our proposal can be easily implemented into router firmware with provided discrete expressions. Finally, our simulation results are presented to validate the possible benefits that can be gained from cascade control and compare the existing queue management methods as well.

APA, Harvard, Vancouver, ISO, and other styles

26

Casado, Martin, Vikram Vijayaraghavan, Guido Appenzeller, and Nick McKeown. "The Stanford Virtual Router." ACM SIGCOMM Computer Communication Review 32, no. 3 (July 2002): 26. http://dx.doi.org/10.1145/571697.571715.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Chasaki, Danai. ""Roto-Rooting" your router." ACM SIGCOMM Computer Communication Review 41, no. 4 (October 22, 2011): 396–97. http://dx.doi.org/10.1145/2043164.2018486.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

McKeown, Nick, Guido Appenzeller, and Isaac Keslassy. "Sizing router buffers (redux)." ACM SIGCOMM Computer Communication Review 49, no. 5 (November 8, 2019): 69–74. http://dx.doi.org/10.1145/3371934.3371957.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Li, Cunlu, Dezun Dong, Shazhou Yang, Xiangke Liao, Guangyu Sun, and Yongheng Liu. "CIB-HIER." ACM Transactions on Architecture and Code Optimization 18, no. 4 (December 31, 2021): 1–21. http://dx.doi.org/10.1145/3468062.

Full text

Abstract:

Hierarchical organization is widely used in high-radix routers to enable efficient scaling to higher switch port count. A general-purpose hierarchical router must be symmetrically designed with the same input buffer depth, resulting in a large amount of unused input buffers due to the different link lengths. Sharing input buffers between different input ports can improve buffer utilization, but the implementation overhead also increases with the number of shared ports. Previous work allowed input buffers to be shared among all router ports, which maximizes the buffer utilization but also introduces higher implementation complexity. Moreover, such design can impair performance when faced with long packets, due to the head-of-line blocking in intermediate buffers. In this work, we explain that sharing unused buffers between a subset of router ports is a more efficient design. Based on this observation, we propose Centralized Input Buffer Design in Hierarchical High-radix Routers (CIB-HIER), a novel centralized input buffer design for hierarchical high-radix routers. CIB-HIER integrates multiple input ports onto a single tile and organizes all unused input buffers in the tile as a centralized input buffer. CIB-HIER only allows the centralized input buffer to be shared between ports on the same tile, without introducing additional intermediate virtual channels or global scheduling circuits. Going beyond the basic design of CIB-HIER, the centralized input buffer can be used to relieve the head-of-line blocking caused by shallow intermediate buffers, by stashing long packets in the centralized input buffer. Experimental results show that CIB-HIER is highly effective and can significantly increase the throughput of high-radix routers.

APA, Harvard, Vancouver, ISO, and other styles

30

Dobkin, Rostislav (Reuven), Ran Ginosar, and Avinoam Kolodny. "QNoC asynchronous router." Integration 42, no. 2 (February 2009): 103–15. http://dx.doi.org/10.1016/j.vlsi.2008.03.001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Gao, Xianming, Baosheng Wang, and Xiaozhe Zhang. "VR-Cluster: Dynamic Migration for Resource Fragmentation Problem in Virtual Router Platform." Scientific Programming 2016 (2016): 1–14. http://dx.doi.org/10.1155/2016/3976965.

Full text

Abstract:

Network virtualization technology is regarded as one of gradual schemes to network architecture evolution. With the development of network functions virtualization, operators make lots of effort to achieve router virtualization by using general servers. In order to ensure high performance, virtual router platform usually adopts a cluster of general servers, which can be also regarded as a special cloud computing environment. However, due to frequent creation and deletion of router instances, it may generate lots of resource fragmentation to prevent platform from establishing new router instances. In order to solve “resource fragmentation problem,” we firstly propose VR-Cluster, which introduces two extra function planes including switching plane and resource management plane. Switching plane is mainly used to support seamless migration of router instances without packet loss; resource management plane can dynamically move router instances from one server to another server by using VR-mapping algorithms. Besides, three VR-mapping algorithms including first-fit mapping algorithm, best-fit mapping algorithm, and worst-fit mapping algorithm are proposed based on VR-Cluster. At last, we establish VR-Cluster protosystem by using general X86 servers, evaluate its migration time, and further analyze advantages and disadvantages of our proposed VR-mapping algorithms to solve resource fragmentation problem.

APA, Harvard, Vancouver, ISO, and other styles

32

LI, DAWEI, JIE WU, DAJIN WANG, and JIAYIN WANG. "Software-Defined Networking Switches for Fast Single-Link Failure Recovery." Journal of Interconnection Networks 18, no. 04 (December 2018): 1850014. http://dx.doi.org/10.1142/s0219265918500147.

Full text

Abstract:

In this paper, we consider IP fast recovery from single-link failures in a given network topology. The basic idea is to replace some existing routers with a designated switch. When a link fails, the affected router will send all the affected traffic to the designated switch (through pre-configured IP tunnels), which will deliver the affected traffic to its destination without using the failed link. The goal of the approach is to achieve faster failure recovery than traditional routing protocols that employ reactive computing upon link failures. Software-Defined Networking (SDN) switches can serve as the designated switches because they can flexibly redirect affected traffic to other routes, instead of only to the shortest paths in the network. However, SDN switches are very expensive. Our objective is to minimize the number of SDN switches needed and to guarantee that the network can still recover from any single-link failure. For networks with uniform link costs, we show that using normal non-SDN switches with IP tunneling capability as designated switches can guarantee recovery from any single-link failure. For networks with general link costs, we find that not all single-link failures can be recovered by using non-SDN switches as designated switches; by using SDN switches only when necessary, we can reduce the total number of SDN switches needed compared to an existing work. We conduct extensive simulations to verify our proposed approaches.

APA, Harvard, Vancouver, ISO, and other styles

33

Xu, Ke, Wenlong Chen, Chuang Lin, Mingwei Xu, Dongchao Ma, and Yi Qu. "Toward a practical reconfigurable router: a software component development approach." IEEE Network 28, no. 5 (September 2014): 74–80. http://dx.doi.org/10.1109/mnet.2014.6915443.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Hall, J. G., L. Rapanotti, and M. A. Jackson. "Problem Oriented Software Engineering: Solving the Package Router Control Problem." IEEE Transactions on Software Engineering 34, no. 2 (March 2008): 226–41. http://dx.doi.org/10.1109/tse.2007.70769.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Sudaryanto, Sudaryanto, Anggraini Kusumaningrum, Yuliani Indrianingsih, and Dadan Rachman Prabowo. "Web based Enhanced Interior Gateway Routing Protocol (EIGRP) on cisco router 2811 using cisco's Application Programming Interface (API)." Compiler 10, no. 2 (November 30, 2021): 79. http://dx.doi.org/10.28989/compiler.v10i2.966.

Full text

Abstract:

Enhanced Interior Gateway Routing Protocol (EIGRP) is a routing protocol that can be used to determine the path of data to be sent. EIGRP can achieve goals and study interconnected networks to obtain useful information to determine the best path. EIGRP is only adopted by Cisco routers or can be called a Cisco Proprietary Protocol, which can only be used on Cisco router devices. Currently, the EIGRP routing configuration uses the command line. For this reason, a Website-based EIGRP system was created and can be accessed remotely (remotely) with the aim of providing freedom of access and not focusing on one device. Website-based EIGRP system was created by utilizing Cisco's API as a liaison between the programming language and Cisco Router 2811 software. Telnet utilization plays a very important role in creating a Website-based EIGRP System where Telnet can provide wider access in management. By visiting the host and port of the router, the EIGRP Website Based System can easily do this. The results of the test in this study indicate that the Website-based EIGRP system is proven to be able to configure, so that administrators can use it for device management of Cisco Router 2811.

APA, Harvard, Vancouver, ISO, and other styles

36

Jadhav, Nathrao B., and Bharat S. Chaudhari. "Optimized 6x6 Optical Router for Three Dimensional Optical Networks-on-Chip." Journal of Physics: Conference Series 2325, no. 1 (August 1, 2022): 012008. http://dx.doi.org/10.1088/1742-6596/2325/1/012008.

Full text

Abstract:

Abstract The interconnection network is very influential in Multiprocessor system-on-chip (MPSoC) performance. Due to low power efficiency and high latency, conventional interconnects are replaced by electrical networks on-chip (ENoC). However, ENoCs cannot gratify the bandwidth, latency and loss requirements within the available power budget of optical integrated circuits. The reasons being restricted bandwidth, extended delay, and reasonably high power consumption. So, ENoC are being replaced by optical networks-on-chip (ONoC). ONoC has emerged as a promising substitute to provide greater bandwidth, low latency and low power ingestion in MPSoCs. Number of cores required on-chip is increasing which leads to demand of multilayer multi-core processors. Three dimensional (3D) ONoC has become essential for such multilayer multi-core processors. For 3D ONoC, in this paper we have proposed 6x6 non-blocking optical router using micro-ring resonator (MRR) with less number of waveguide crossings and waveguide bendings. Phoenix software is used to simulate proposed optical router. Insertion loss of proposed optical router is lowest among existing non-blocking optical routers of 3D ONoC.

APA, Harvard, Vancouver, ISO, and other styles

37

Badrouchi, Sami, Abdelkrim Zitouni, Kholdoun Torki, and Rached Tourki. "Asynchronous NoC Router Design." Journal of Computer Science 1, no. 3 (March 1, 2005): 429–36. http://dx.doi.org/10.3844/jcssp.2005.429.436.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

McKeown, Nick, and Damon Wischik. "Making router buffers much smaller." ACM SIGCOMM Computer Communication Review 35, no. 3 (July 2005): 73–74. http://dx.doi.org/10.1145/1070873.1070883.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Vishwanath, Arun, Vijay Sivaraman, and Marina Thottan. "Perspectives on router buffer sizing." ACM SIGCOMM Computer Communication Review 39, no. 2 (March 31, 2009): 34–39. http://dx.doi.org/10.1145/1517480.1517487.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

S, Suharto, Paryono P, and Hartanto Prawibowo. "WOODEN MASK MAKING TECHNIQUES WITH 3 AXIS CNC ROUTER MACHINE." International Journal of Innovative Research in Advanced Engineering 7, no. 11 (November 30, 2020): 384–90. http://dx.doi.org/10.26562/ijirae.2020.v0711.002.

Full text

Abstract:

This study aims to determine the technique of making wooden masks with a 3-axis CNC Router machine and to compare the time and quality of the results of making masks manually. This research method uses cangkring wood, mahoni wood and pule wood. The design process with the help of the CorelDraw software, Aspire vectric. Manufacturing process with the mach-3 software. The machining process of a 3 Axis CNC Router with a variety of machining roughing and finishing with a variety of tool paths, step over, step down, spindle rotation, plugrate, feederate, and machining time. The results showed making wooden masks with a CNC Router machine has a faster time, uniform shape and size than manual making. Pule wood material provides a faster yield, smoother surface, and machineable than cangkring wood and mahoni wood. The machining time of the CNC router for making one wooden mask is 2 hours-20 minutes for cangkring wood, 3 hours-06 minutes for mahogany wood, and 2 hours-07 minutes for pule wood.

APA, Harvard, Vancouver, ISO, and other styles

41

Shiraishi, Y., and J. Sakemi. "A Permeation Router." IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 6, no. 3 (May 1987): 462–71. http://dx.doi.org/10.1109/tcad.1987.1270293.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

SUN, Zhi-Xin. "Router Anomaly Traffic Detection Based on Modified-CUSUM Algorithms." Journal of Software 16, no. 12 (2005): 2117. http://dx.doi.org/10.1360/jos162117.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Ji, Wusheng, Li Li, and Weiwei Zhou. "Design and Implementation of a RFID Reader/Router in RFID-WSN Hybrid System." Future Internet 10, no. 11 (November 3, 2018): 106. http://dx.doi.org/10.3390/fi10110106.

Full text

Abstract:

In order to put Radio Frequency Identification (RFID) and Wireless Sensor Network (WSN) in a hybrid system, this paper presents the design and implementation of a RFID reader/router that can obtain information of both RFID tags and WSN sensor nodes and transmit the information through the WSN to the PC server. The RFID reader and WSN router are combined with both hardware and software. In hardware structure, CC2530 is used as micro controller and RF module for ZigBee wireless communication, and MF RC522 is used as reader RF chip. The software deals with both identity and sensing information and controls the routing. Experiment results show that the RFID reader/router achieves long distance identification, flexibility, scalability, and low cost. It also provides reliable and secured data transmission and broadens the communication range and application scope of RFID readers.

APA, Harvard, Vancouver, ISO, and other styles

44

Oxman, Gadi, and Shlomo Weiss. "RIDER: Ring deflection router with buffers." Design Automation for Embedded Systems 18, no. 3-4 (February 28, 2014): 141–55. http://dx.doi.org/10.1007/s10617-014-9130-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Chang, Yen-Jung, Yu-Ting Lee, Jhih-Rong Gao, Pei-Ci Wu, and Ting-Chi Wang. "NTHU-Route 2.0: A Robust Global Router for Modern Designs." IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 29, no. 12 (December 2010): 1931–44. http://dx.doi.org/10.1109/tcad.2010.2061590.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Wang, Heng, Bao Guo Wang, Shi Qiang Zhao, and Xia Fu Lv. "Design and Implementation of IPv6 Border Router for Wireless Sensor Networks." Advanced Materials Research 989-994 (July 2014): 4737–41. http://dx.doi.org/10.4028/www.scientific.net/amr.989-994.4737.

Full text

Abstract:

With the rapid development of Internet of things, IPv6 has been introduced into wireless sensor networks and widely used in many areas. It is significant to develop routing devices to connect wireless sensor networks and the Internet based on IPv6 technology. In this paper, we present a 6LoWPAN (IPv6 over Low power Wireless Personal Area Networks) border router scheme. The hardware design and software design are discussed and the experimental results demonstrate the feasibility of the router scheme. By using the proposed border router, the network can achieve end-to-end communications between 6LoWPAN nodes and IPv6 hosts in a universal method.

APA, Harvard, Vancouver, ISO, and other styles

47

Ramli, Ayyub, Sriyono Sriyono, and Harry Ramza. "Analisa Kecepatan Lalu Lintas Data Jaringan Local Area Network Menggunakan Graphical Network Simulator 3 (GNS-3)." Electrical Engineering Acta 1, no. 1 (May 14, 2021): 13–19. http://dx.doi.org/10.22236/ate.v1i1.6946.

Full text

Abstract:

Perkembangan teknologi informasi tidak bisa dipisahkan dari perkembangan teknologi dan infrastruktur jaringan komputer. Pembuatan suatu jaringan diperlukan perancangan dan simulasi terlebih dahulu supaya hasilnya sesuai dengan keinginan atau mendapatkan sesuatu yang maksimal. Banyak sekali komponen yang dapat digunakan untuk perancangan seperti router. Router sendiri memiliki banyak system operasi contohnya router MikrotikOS. Jurnal ini untuk merancang dan mensimulasikan jaringan komputer. Perancangan dan simulasi jaringan komputer dapat menggunakan aplikasi Graphical Network Simulator 3(GNS3). GNS3 adalah software simulasi jaringan komputer berbasis GUI yang mirip dengan Cisco Packet Tracer. Namun pada GNS3 memungkinkan simulasi jaringan yang komplek, karena menggunakan operating system asli dari perangkat jaringan seperti cisco, mikrotik dan juniper. Sehingga kita berada kondisi lebih nyata dalam mengkonfigurasi router langsung daripada di Cisco Packet Tracer. Berbeda dengan Cisco Packet Tracer, pada GNS3 harus menginstal terlebih dahulu system operasi dari router itu sendiri yaitu router MikrotikOS maupun CiscoIOS. Di dalam penulisan ini akan dibahas mengenai bagaimana merancang dan mensimulasikan jaringan komputer menggunakan aplikasi GNS3 dengan konfigurasi yang baik dan benar sehingga dapat diterapkan dengan baik.

APA, Harvard, Vancouver, ISO, and other styles

48

SUN, Zhi-Xin. "A Router Anomaly Traffic Filter Algorithm Based on Character Aggregation." Journal of Software 17, no. 1 (2006): 295. http://dx.doi.org/10.1360/jos170295.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Dhamdhere, Amogh, and Constantine Dovrolis. "Open issues in router buffer sizing." ACM SIGCOMM Computer Communication Review 36, no. 1 (January 10, 2006): 87–92. http://dx.doi.org/10.1145/1111322.1111342.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

So, Won, Ashok Narayanan, David Oran, and Mark Stapp. "Named data networking on a router." ACM SIGCOMM Computer Communication Review 43, no. 4 (September 19, 2013): 495–96. http://dx.doi.org/10.1145/2534169.2491699.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!