Relevant bibliographies by topics / Smykový reometr

Academic literature on the topic 'Smykový reometr'

Author: Grafiati
Published: 4 June 2021
Last updated: 15 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Smykový reometr.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Contents

  1. Dissertations / Theses

Dissertations / Theses on the topic "Smykový reometr":

1

Železník, Tomáš. "Slit-flow reometr pro magnetické i nemagnetické kapaliny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417518.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
In this thesis was designed, manufactured and tested the fourth evolution of a slit-flow rheometer with another necessary parts, eg. rheometer`s holder, drive frame and important jig tools. The rheometer is able to measure rheological properties of magnetic and non-magnetic fluids at very high shear rates, which commercial rheometers can not reach. It is designed for 200 bar pressure and maximum load 15 kN. The construction of the slit-flow rheometer with it`s holder and drive frame improves user friendliness, accelerates change of the fluid sample and expands research opportunities thanks to a big space for additional adjustments. It is possible to use different length of the slit and thanks to a changeable inserts it is possible to change parameters of the slit (roughness of the walls, wall material, thickness of the slit). A part of this thesis was focused on illation of necessary equations for planning calibration measurements. Aim of these measurements is to obtain minor pressure losses dependence on Reynolds number for specific slit.
2

Dostál, Filip. "Vliv druhu a dávky polymeru na vlastnosti modifikovaných pojiv." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409806.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The diploma thesis is focused on polymer modified binders with different polymer doses. The theoretical part describes the history of the use of bitumen, the extraction of bitumen from oil and behavious of the polymer type SBS/SB, which is used in the diploma thesis on modified binders. Further, the theoretical part describes the empirical and functional tests of bitumen binders. In the practical part the results of indidual tests are presented and compared with the standard ČSN 65 7222-1. At the end of the diploma thesis are summarized results of work and evaluation of binders with the best achieved properties.
3

Pěnčík, Michal. "Reologické vlastnosti asfaltových pojiv." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227653.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The Diploma thesis is focused on rheological properties of bituminous binders and mixtures. Above all, it describes the changes of these properties of samples of bituminous binders and mixtures. Those were brought by the process of laboratory aging, since it simulates the changes occurring in the in the real-life conditions. The theoretical part depicts the field of rheology and methods utilized for simulating the ageing of binders and mixtures. The practical part describes the process of preparation of samples and its testing. Firstly, the ageing of bituminous mixture by the means of BSA method (Braunschweiger Alterung) took place, which was followed by preparing the solids for testing the modulus of stiffness and main testing. The rest of the mixture was used for extracting the binder. Tests with the binder were focused on the usage of dynamic shear rheometer (complex shear modulus, dynamic viscosity). The last part of the work is dedicated to the comparison of the outcomes of testing.
4

Střasáková, Monika. "Stárnutí asfaltových pojiv." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240117.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The theoretical part of this thesis describes the rheology of bituminous binders, aging of asphalt binders and laboratory methods simulating short and long term aging. The following describes an empirical tests (needle penetration, softening point ring ball method) and functional tests (complex shear modulus and phase angle, dynamic viscosity), which are performed in the dynamic shear rheometer. At the end of this section, laboratory aging of bituminous binders using method RTFOT and method RTFOT + PAV is described in more detail. In the practical part of this thesis, the results of all tests performed on the binders aged using RTFOT + PAV are introduced and compared with results of properties of non-aged binders and binders aged by 3xRTFOT.
5

Zábranský, Ivo. "Vlastnosti nízkoteplotních polymerem modifikovaných asfaltů." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392123.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The Diploma thesis is focus on polymer modified bitumen for warm mix asphalt. The theoretical part of the thesis describes additives which influence the properties of bitumen for their use and reduction of production and service temperatures. Further, the theoretical part describes the conclusions from the researches. This part also describes empirical and functional tests of bituminous binders. The practical part presents the results of individual tests. Tests were performed on samples of non-aged, aged by RTFOT and RTFOT + PAV methods. The results of the work and the assessment of the suitability of bituminous binders are summarized at the end of the thesis.
6

Musil, Vladimír. "Relaxace smykového napětí asfaltových pojiv v DSR." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227690.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The thesis describes the relaxation properties of bituminous binders determined in dynamic shear rheometer (DSR). Paving bitumen, polymer modified bitumen (PMB) and crumb rubber modified bitumen (CRmB) were chosen for comparison. In order to describe the effects of ageing on asphalt binders relaxation properties, the laboratory simulation of ageing using RTFOT and 3xRTFOT method was performed. For each binder were simultaneously conducted tests of needle penetration, softening point and elastic recovery. Selected bitumens were used for the production of asphalt mixtures. The low-temperature properties tests (TSRST) were performed for these mixtures, when the results were compared to the relaxation properties of binders determined in the DSR.
7

Coufalík, Pavel. "Reologické vlastnosti asfaltových pojiv." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-355627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Dissertation thesis is focused on rheological properties of asphalt binders and on changes of their performance during the lifetime in road structures. Aging processes of asphalt binders and methods of laboratory aging are described in the theoretical part of the thesis. Furthermore, basic rheological models and related test methods for the evaluation of asphalt binders are described. In the practical part, properties of asphalt binders are investigated after aging process and their performance is evaluated by empirical and functional test methods. The various methods of aging are compared with each other and a relationship between real conditions and laboratory aging is researched. In the next section, vacuum flashed cracked residue (VFCR) is added to the selected asphalt binders and their influence on rheological properties during description of aging of asphalt binders is investigated. The results were used in publication of two certified methodology under the title „The methodology for the evaluation of paving bitumen in terms of susceptibility to thermal oxidative aging“ and „The methodology describes laboratory aging of asphalt mixtures“. The results of the thesis are listed in the conclusion.
8

Hegrová, Michaela. "Vliv etherů celulózy na reologické vlastnosti vápna." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371927.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The subject of this diploma thesis is a study of the influence of cellulose ethers on the rheological properties of lime. The theoretical part focuses on rheological parameters, techniques and test equipment used in rheology measurements. Various types of cellulose ethers and their influence on the rheological properties of fresh mortars are described. The practical part deals with the study of the influence of different types and quantities of cellulose ethers on the properties of fresh lime pastes and mortars. The results were obtained from measurements on a rotational rheometer with a special geometry for building materials. Measuring methods used were flow and oscillatory tests. Yield stress, viscosity and flow index were determined by the flow measurement. The stability and stiffness of fresh materials were determined during the oscillation measurements. The measured results are then evaluated and compared.
9

Gromeš, Vít. "Studium reologických vlastností betonů s přídavkem polymerních vláken upravených nízkoteplotním plasmatem." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225912.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Polypropylene fibers are used in concrete mixtures to avoid early cracks during shrinkage. Low thickness of each fiber and low density are reasons, why these fibers are effective in small dosage. Their disadvantages are smooth surface and hydrophobic character of polypropylene, thus it is necessary to improve their surface for better spread during mixing and to reach needed adhesion between fibers and cement paste. In present time are using chemical solutions applied on surface of the fibers to provide better water absorption, but the trend is reducing of using chemicals in industry and this situation demands new technology. There is possible solution, polypropylene fibers treated by low-temperature plasma. This method was developer by cooperation Masaryk University in Brno with company KrampeHarex and Brno Universiry of Technology. The goal of this thesis is to bring comparison, of influence on rheology properties of fresh concrete, between admixed the fibers with applied chemical layer and low-temperature plasma treated polypropylene fibers.

To the bibliography