Academic literature on the topic 'Slug injection'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Slug injection.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Slug injection"
Soleimani, Rasa, Jalel Azaiez, Mohammad Zargartalebi, and Ian D. Gates. "Heat transfer analysis of immiscible slug flow-based microchannels: Study of channels with extended surfaces." Physics of Fluids 34, no. 9 (September 2022): 093310. http://dx.doi.org/10.1063/5.0114088.
Full textTantianon, Anan, and Falan Srisuriyachai. "Assessment of Surfactant Flooding With Variations of Slug Injection Strategies in Waterflooded Reservoir." International Journal of Advanced Research in Engineering 3, no. 3 (September 27, 2017): 1. http://dx.doi.org/10.24178/ijare.2017.3.3.01.
Full textTan, Li, and Parwinder S. Grewal. "Pathogenicity of Moraxella osloensis, a Bacterium Associated with the Nematode Phasmarhabditis hermaphrodita, to the Slug Deroceras reticulatum." Applied and Environmental Microbiology 67, no. 11 (November 1, 2001): 5010–16. http://dx.doi.org/10.1128/aem.67.11.5010-5016.2001.
Full textGong, Jiakun, Sebastien Vincent-Bonnieu, Ridhwan Z. Kamarul Bahrim, Che A. N. B. Che Mamat, Raj D. Tewari, Mohammad I. Mahamad Amir, Jeroen Groenenboom, Rouhollah Farajzadeh, and William R. Rossen. "Injectivity of Multiple Slugs in Surfactant Alternating Gas Foam EOR: A CT Scan Study." SPE Journal 25, no. 02 (February 4, 2020): 895–906. http://dx.doi.org/10.2118/199888-pa.
Full textAdegboyega B. Ehinmowo and Ndubusi U. Okereke. "OPTIMIZATION OF RISERBASE GAS INJECTION FOR SLUG FLOW ATTENUATION." JOURNAL OF THE NIGERIAN SOCIETY OF CHEMICAL ENGINEERS 37, no. 3 (September 30, 2022): 43–49. http://dx.doi.org/10.51975/22370306.som.
Full textTuncharoen, Warut, and Falan Srisuriyachai. "Evaluation of Polymer Alternating Waterflooding in Multilayered Heterogeneous Waterflooded Reservoir." MATEC Web of Conferences 171 (2018): 04001. http://dx.doi.org/10.1051/matecconf/201817104001.
Full textQian, Jin-yuan, Min-rui Chen, Zan Wu, Zhi-jiang Jin, and Bengt Sunden. "Effects of a Dynamic Injection Flow Rate on Slug Generation in a Cross-Junction Square Microchannel." Processes 7, no. 10 (October 18, 2019): 765. http://dx.doi.org/10.3390/pr7100765.
Full textZhang, Ji Hong, Zhi Ming Zhang, Xi Ling Chen, Qing Bin He, and Jin Feng Li. "Study on Influence of Injection Method on the Effect of Oil Displacement of Nanometer Microspheres." Advanced Materials Research 734-737 (August 2013): 1272–75. http://dx.doi.org/10.4028/www.scientific.net/amr.734-737.1272.
Full textZanganeh, M. Namdar, and W. R. R. Rossen. "Optimization of Foam Enhanced Oil Recovery: Balancing Sweep and Injectivity." SPE Reservoir Evaluation & Engineering 16, no. 01 (January 30, 2013): 51–59. http://dx.doi.org/10.2118/163109-pa.
Full textMohammadikharkeshi, Mobina, Ramin Dabirian, Ram S. Mohan, and Ovadia Shoham. "Experimental Study and Modeling of Slug Dissipation in a Horizontal Enlarged Impacting Tee-Junction." SPE Journal 25, no. 05 (June 1, 2020): 2508–20. http://dx.doi.org/10.2118/190131-pa.
Full textDissertations / Theses on the topic "Slug injection"
Cockcroft, Steven Lee. "High-pressure coal injection in the zinc slag fuming process." Thesis, University of British Columbia, 1986. http://hdl.handle.net/2429/26687.
Full textApplied Science, Faculty of
Mining Engineering, Keevil Institute of
Graduate
David, Sergio Z. "A Practical Approach for Formation Damage Control in Both Miscible and Immiscible CO2 Gas Flooding in Asphaltenic Crude Systems Using Water Slugs and Injection Parameters." Thesis, University of Louisiana at Lafayette, 2017. http://pqdtopen.proquest.com/#viewpdf?dispub=10196386.
Full textCO2 flooding has proven to be an effective technique for enhanced oil recovery. However, the application of CO2 flooding in the recovery process of asphaltenic crude systems is often avoided, as high asphaltene precipitation rates may occur. While the effects of asphaltene concetration and CO2 injection pressure on asphaltene precipitation rate have been the focus of many studies, asphaltene precipitation rate is not a reliable factor to predict the magnitude of asphaltene-induced formation damage. Wettability alteration is only caused by the immobile asphaltene deposits on the rock surface. The enternmaint of flocs may occur at high fluid velocity. Morover, the effective permeability reduction is only caused by the flocs, which have become large enough to block the pore throats. The dissociation of the flocs may occur under certain flow conditions. In this study, a compositional reservoir simulation was conducted using Eclipse 300 to investigate the injection practice, which avoids asphaltene-induced formation damage during both immiscible and miscible CO2 flooding in asphaltenic crude system. Without injection, at pressure above bubble point, slight precipitation occurred in the zone of the lowest pressure near the producing well. As pressure approached the bubble point, precipitation increased due to the change in the hydrocarbon composition, which suggested that the potential of asphaltene-induced formation damage is determined by the overall fluid composition. At very low pressure, precipitation decreased due to the increase in the density.
As CO2 was injected below the minimum miscibility pressure, a slight precipitation occurred in the transition zone at the gas-oil interface due to the microscopic diffusion of the volatile hydrocarbon components caused by the local concentration gradients. The increase in CO2 injection rate did not significantly increase the precipitation rate.
As CO2 was injected at pressure above the minimum miscibility pressure, precipitation occurred throughout the entire reservoir due to the vaporizing drive miscibility process. While precipitation increased with the injection rate, further increase in the injection rate slightly decreased the deposition due to shear. The pressure drop in the water phase caused by the pore throat increased the local water velocity, resulting in a more effective removal of the clogging asphaltene material.
Wang, Yu-chi, and 王毓麒. "Applying Six Sigma Approach and FMEA in Cold Slug Improvement of Plastic Injection Molding (A case study of S Company)." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/52816471755934615181.
Full text國立中央大學
工業管理研究所碩士在職專班
100
Along with the continuously increasing cost of plastic raw materials, the injection molding industry has got into the Low-profit times. In spite of there are strong raw material R&D team and the outstanding product design ability. However, if it is no well control of process systematically and standardized, this strength will be nibbled away or even resulted of loss by producing too many waste and nonconforming products. Therefore, it is an urgent issue to enhance the material efficiency then reduce the defect rate in injection molding process. The purpose of this thesis is based on the S company’s historical defect data of injection molding to apply Six Sigma approach to implement measurement, Analysis, improvement, action drawing up and execution, and to use PFMEA to evaluate, control and standardize to avoid the reoccurrence of cold slug defect with its preventive characteristics. As the results of the analysis, it is defined an efficient improvement process to significantly reduce the cold slug defect of injection molding through this research. Furthermore, the improvement tracks can be left for company to implement and build up the PFMEA then do the knowledge management well of process improvement, it is also a practical training material for process members. We can further follow this improvement pattern to implement improvement for the other defect modes.
Boechat, Chequer Larissa. "Particle Detachment in Single-Phase and Two-Phase Flows in Porous Media." Thesis, 2019. http://hdl.handle.net/2440/124362.
Full textThesis (Ph.D.) -- University of Adelaide, Australian School of Petroleum and Energy Resources, 2020
Jaw, Ming-Ching, and 趙明欽. "Transition Zone of Slag-Cement Paste/Aggregate trough Dry-Mixed/ Steam-Injection Process." Thesis, 1996. http://ndltd.ncl.edu.tw/handle/37860048791939629645.
Full text國立交通大學
土木工程學系
84
This thesis studies the transition zone properties of slag- cement pasteand different types of aggregate (limestone,granite and Ottawa sand) bydry-mixed/steam-injection (DM/SI) process.The micro-properties of thetransition zone were investigated of DM/ SI specimens by means of SEM,EDAX and microhardness.By addition different silicate materials (quartzflour,rice husk ash and blast furnace slag) to the paste,and researchwere conducted to study their effects on it''s compressive strength.Testresults are indicated that:In the DM/SI process ,the bond strength betweenpaste and aggregate is extremely poor.By SEM observation ,the hydrated production on the facture surface between paste and aggregate has crystalform and loosly structure results in poor bond.Crystal silicate (quartzflour pass through no.200 sieve) increase the compressive strength of DM/SI paste specimens.The optimum amount of addition is about 30%.Mixingamorphouse silicate (blast furnace slag) with cement through DM/SI processyield samples with poor compressive strength.Both DM/SI method and wet-mixed method with higher microhardness near sand surface.This result isprobably due to crystal hydrated production form in this area.After DM/ SIprocess,the compressive strength of mortar specimens will decrease in the beginning 7 days,then the specimen slowly recover it''s strength.
Chang, Tung-Yuan, and 張東源. "Compression Properties of Slag Cement Concrete Made by the Dry- Mix/Steam-Injection Procedure." Thesis, 1993. http://ndltd.ncl.edu.tw/handle/27183615093099781434.
Full textWENG, REN-HUANG, and 翁仁滉. "Hydration mechanisms and physical properties of slag-cement hardened through dry-mix/steam-injection process." Thesis, 1992. http://ndltd.ncl.edu.tw/handle/14805569612016377197.
Full textYan, Jyh-Cherng, and 顏志成. "Strength Growth and Hydration Mechanisms of Various Fineness Slag-Cement Hardened througth Dry-Mix/Steam- Injection Process." Thesis, 1994. http://ndltd.ncl.edu.tw/handle/48282464109021062790.
Full textTsai, Kun-chih, and 蔡坤志. "A study on the properties of cement-based crack injection materials modified by the slag and ultra-fine reactive fly ash." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/282c29.
Full textBooks on the topic "Slug injection"
Lederer, Gregor. Rocket Engine on a Student Budget. Technische Universität Dresden, 2021. http://dx.doi.org/10.25368/2022.406.
Full textBook chapters on the topic "Slug injection"
Zhang, Jiashun, Xinghua Yang, Peikun Liu, Yuekan Zhang, and Zeling Diao. "Study on the Performance of Hydrocyclone for Desliming Lithium Slag by Water-Injection Flow Rate." In Lecture Notes in Civil Engineering, 175–85. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-5783-3_14.
Full textLing, Hongbin, Annelies Malfliet, Bart Blanpain, and Muxing Guo. "Evaporation of Antimony Trioxide from Antimony Slag by Nitrogen Injection in a Top-Submerged Lance Smelting Set-Up." In The Minerals, Metals & Materials Series, 133–42. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92388-4_13.
Full textNuñez, D. A., M. A. Ramirez-Argaez, and A. N. Conejo. "Mathematical Modeling of Bottom Gas Injection in Industrial Metallurgical Ladles in the Presence of a Top Layer of Slag." In PRICM, 2941–48. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118792148.ch364.
Full textNuñez, D. A., M. A. Ramirez-Argaez, and A. N. Conejo. "Mathematical Modeling of Bottom Gas Injection in Industrial Metallurgical Ladles in the Presence of a Top Layer of Slag." In Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing, 2941–48. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48764-9_364.
Full text"Algorithm for Monitoring Impact of Intensity of Inert Gas Blowing to Visual Character of Molten Steel Surface." In Advances in Multimedia and Interactive Technologies, 180–86. IGI Global, 2014. http://dx.doi.org/10.4018/978-1-4666-4896-8.ch014.
Full textLi, P., Q. Yu, Q. Qin, and W. Lei. "Influence of injection rate on coal gasification in molten blast furnace slag." In Frontiers of Energy and Environmental Engineering, 232–36. CRC Press, 2012. http://dx.doi.org/10.1201/b13718-53.
Full textWitold, Brylicki, Malolepszy Jan, and Stryczek Stanislaw. "Industrial scale application of the alkali activated slag cementitious materials in the injection sealing works." In Studies in Environmental Science, 841–49. Elsevier, 1994. http://dx.doi.org/10.1016/s0166-1116(08)71515-2.
Full textConference papers on the topic "Slug injection"
Cole, Tanner, Ramin Dabirian, Mobina Mohammadikharkeshi, Ram Mohan, and Ovadia Shoham. "Dissipation of Injected Slug in Enlarged Impacting Tee in Single Branch Blocking Configuration." In ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ajkfluids2019-5054.
Full textLutchmansingh, P. M., C. Marietta, T. Ertekin, and J. H. Abou-Kassem. "Quantitative Analysis of Performance of Polymer Slug Injection." In SPE Eastern Regional Meeting. Society of Petroleum Engineers, 1988. http://dx.doi.org/10.2118/18534-ms.
Full textDai, Liming, and Yihe Zhang. "Influences of Water Injection Rate and Oil Length on Oil Slug Mobilization in a Capillary Model." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-63242.
Full textIde, Hideo, Ryuji Kimura, and Masahiro Kawaji. "Effect of Inlet Geometry on Adiabatic Gas-Liquid Two-Phase Flow in a Microchannel." In ASME 2007 5th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2007. http://dx.doi.org/10.1115/icnmm2007-30141.
Full textHuang, Bin, and Cheng Fu. "Laboratory Experiment Research on Multi-slug Alternative Injection Method of Polymer Flooding." In 2016 7th International Conference on Mechatronics, Control and Materials (ICMCM 2016). Paris, France: Atlantis Press, 2016. http://dx.doi.org/10.2991/icmcm-16.2016.65.
Full textZhang, Liqin. "Analysis on the Effect of High Concentration Slug before Stopping Polymer Injection." In 2018 6th International Conference on Machinery, Materials and Computing Technology (ICMMCT 2018). Paris, France: Atlantis Press, 2018. http://dx.doi.org/10.2991/icmmct-18.2018.59.
Full textZhou, Nancy Chun, Meng Lu, Yajun Liu, Jianshen Li, Fuchen Liu, Wenhong Li, Xinwei Wu, et al. "Pilot Tests of Enhanced Oil Recovery by Integrating Conformance Control Treatment and Surfactant Flooding for Low Permeability Reservoirs." In ADIPEC. SPE, 2022. http://dx.doi.org/10.2118/211472-ms.
Full textTandon, Apoorv, Fahad Khan, Raman Shukla, Amit Saxena, Shivanjali Sharma, and Koushik Guha Biswas. "3-D Micromodel for Visualization & Experimental Analysis of Flow Behavior, Surface Tension and Polymer Concentration on Enhanced Oil Recovery." In Offshore Technology Conference Asia. OTC, 2022. http://dx.doi.org/10.4043/31352-ms.
Full textWu, H. Y., Ping Cheng, Billy Chin-Pang Siu, and Yi-Kuen Lee. "Alternating Condensation Flow Patterns in Microchannels." In ASME 2004 2nd International Conference on Microchannels and Minichannels. ASMEDC, 2004. http://dx.doi.org/10.1115/icmm2004-2394.
Full textGavritas, Mirela, and Brian G. Woods. "FR Number Effect on Downcomer Flowpattern Development in Cold Leg Injection Scenarios." In 10th International Conference on Nuclear Engineering. ASMEDC, 2002. http://dx.doi.org/10.1115/icone10-22728.
Full textReports on the topic "Slug injection"
Casademunt, Jaume. Injection of Nucleate-Boiling Slug Flows into a Heat Exchange Chamber in Microgravity. Fort Belvoir, VA: Defense Technical Information Center, June 2015. http://dx.doi.org/10.21236/ada626943.
Full textSharma, G. D. Study of hydrocarbon miscible solvent slug injection process for improved recovery of heavy oil from Schrader Bluff pool, Milne Point Unit, Alaska. Quarterly report, October 1, 1993--December 31, 1993. Office of Scientific and Technical Information (OSTI), December 1993. http://dx.doi.org/10.2172/10138057.
Full textSharma, G. D. Study of hydrocarbon miscible solvent slug injection process for improved recovery of heavy oil from Schrader Bluff Pool, Milne Point Unit, Alaska. [Quarterly] report, January 1, 1993--March 31, 1993. Office of Scientific and Technical Information (OSTI), June 1993. http://dx.doi.org/10.2172/10152752.
Full textSharma, G. D. Study of hydrocarbon miscible solvent slug injection process for improved recovery of heavy oil from Schrader Bluff Pool, Milne Point Unit, Alaska. [Quarterly] report, January 1, 1994--March 31, 1994. Office of Scientific and Technical Information (OSTI), June 1994. http://dx.doi.org/10.2172/10160651.
Full textSharma, G. D. Study of hydrocarbon miscible solvent slug injection process for improved recovery of heavy oil from Schrader Bluff Pool, Milne Point Unit, Alaska. Annual report, December 1, 1992--December 31, 1993. Office of Scientific and Technical Information (OSTI), January 1994. http://dx.doi.org/10.2172/10160654.
Full textSharma, G. D. Study of hydrocarbon miscible solvent slug injection process for improved recovery of heavy oil from Schrader Bluff Pool, Milne Point Unit, Alaska. Annual report, January 1, 1994--December 31, 1994. Office of Scientific and Technical Information (OSTI), July 1995. http://dx.doi.org/10.2172/83852.
Full textS. Street, K.S. Coley, and G.A. Iron. AISI/DOE Technology Roadmap Program: Removal of Residual Elements in The Steel Ladle by a Combination of Top Slag and Deep Injection Practice. Office of Scientific and Technical Information (OSTI), August 2001. http://dx.doi.org/10.2172/799244.
Full textStudy of hydrocarbon miscible solvent slug injection process for improved recovery of heavy oil from Schrader Bluff Pool, Milne Point Unit, Alaska. Final report. Office of Scientific and Technical Information (OSTI), November 1995. http://dx.doi.org/10.2172/188915.
Full text