Books on the topic 'Sheet-steel'

Gérard, Béranger, Henry Guy 1906-, and Sanz Germain, eds. The book of steel. Andover, UK: Intercept, 1996.

V, Radi͡u︡kevich L., ed. Intensifikat͡s︡ii͡a︡ proizvodstva listovoĭ stali na shirokopolosnykh stanakh. Moskva: "Metallurgii͡a︡", 1991.

V, Lipukhin I͡U. Proizvodstvo ėffektivnykh vidov ot͡sinkovannoĭ listovoĭ stali. Moskva: "Metallurgii͡a", 1987.

American Welding Society. Structural Welding Committee. and American National Standards Institute, eds. Structural welding code--sheet steel. Miami, Fla: American Welding Society, 1989.

American Welding Society. Structural Welding Committee. and American National Standards Institute, eds. Structural welding code--sheet steel. Miami, Fla: American Welding Society, 1989.

International, Conference on Zinc and Zinc Alloy Coated Steel Sheet (1989 Tokyo Japan). Proceedings: International Conference on Zinc and Zinc Alloy Coated Steel Sheet : galvatech ʼ89 : September 5-7, 1989 Keidanren Kaikan Tokyo Japan. Tokyo, Japan: Iron and Steel Institute of Japan, 1989.

Elsen, Patrick. Bake-Hardening-Effekt bei Feinblechen. Düsseldorf: VDI Verlag, 1993.

Engineers, Society of Automotive. Innovations in steel sheet products & processing & steel bar products. Warrendale, PA: SAE International, 2006.

R, Pradhan, Ludkovsky G, Metallurgical Society (U.S.). Ferrous Metallurgy Committee., and Metallurgical Society (U.S.). Fall Meeting, eds. Hot- & cold-rolled sheet steels: Proceedings of a symposium sponsored by the Ferrous Metallurgy Committee of the Metallurgical Society, and held at the TMS Fall Meeting in Cincinnati, Ohio, October 12-13, 1987. Warrendale, Pa: The Society, 1988.

G, Ludkovsky, Pradhan R, Metallurgical Society of AIME. Ferrous Metallurgy Committee, Metallurgical Society of AIME, and TMS Fall Meeting. (1987 : Cincinnati, Ohio), eds. Hot- & cold-rolled sheet steels: Proceedings of a symposium sponsored by the Ferrous Metallurgy Committee of The Metallurgical Society, and held at the TMS Fall Meeting in Cincinnati, Ohio, October 12-13, 1987. Warrendale, PA: Metallurgical Society, 1988.

SAE International Congress & Exposition (1989 Detroit, Mich.). Steel stamping technology: Application and impact. Warrendale, PA: Society of Automotive Engineers, 1989.

Braunschweig, Germany) International Conference on Steels in Cars and Trucks (4th 2014. SCT 2014: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together. Düsseldorf: Verlag Stahleisen, 2014.

International Conference on Steels in Cars and Trucks (2nd 2008 Wiesbaden, Germany). SCT 2008: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together. Düsseldorf: Stahleisen GmbH, 2008.

Symposium on High-Strength Sheet Steels for the Automotive Industry (1994 Baltimore, Md.). Proceedings of the Symposium on High-Strength Sheet Steels for the Automotive Industry: This symposium was held in conjunction with the 36th Mechanical Working and Steel Processing Conference, Baltimore, MD, October 16-19, 1994. Warrendale, PA: The Society, 1994.

International Conference on Steels in Cars and Trucks (3rd 2011 Salzburg, Austria). SCT2011: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together. Düsseldorf: Stahleisen GmbH, 2011.

Galvatech '95 (1995 Chicago, Ill.). Galvatech '95: Conference proceedings : the use and manufacture of zinc and zinc alloy coated sheet steel products into the 21st century: September 17-21, 1995, Chicago, IL, USA. Warrendale, PA: The Society, 1995.

International Conference on Steels in Cars and Trucks (2nd 2008 Wiesbaden, Germany). SCT 2008: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together. Düsseldorf: Stahleisen GmbH, 2008.

Dattilo, M. Electrochemical impedance spectroscopy study of corrosion of painted cold-rolled and electrogalvanized sheet steel for automotive use. Pgh. [i.e. Pittsburgh] PA: United States Dept. of the Interior, Bureau of Mines, 1990.

Engineers, Society of Automotive, and SAE World Congress (2005 : Detroit, Mich.), eds. Innovations in steel sheet and bar products and processing. Warrendale, Pa: Society of Automotive Engineers, 2005.

Engineers, Society of Automotive, and SAE International Congress & Exposition (1997 : Detroit, Mich.), eds. Steel in automotive applications. Warrendale, PA: Society of Automotive Engineers, 1997.

Varis, Juha. A novel procedure for establishing clinching parameters for high strength steel sheet. Lappeenranta, Finland: Lappeenranta University of Technology, 2000.

author, Harrington Jonathan D., Mathay William L. author, and Nickel Development Institute (Canada), eds. Stainless steel sheet lining of steel tanks and pressure vessels. Toronto, Ont: Nickel Development Institute, 1989.

Engineers, Society of Automotive, and SAE International Congress & Exposition (1996 : Detroit, Mich.), eds. New steel products and processing for automotive applications. Warrendale, PA: Society of Automotive Engineers, 1996.

Mikuła, Janusz. Analityczne metody oceny spawalności stali. Kraków: Politechnika Krakowska, 2001.

Colo.) International Conference on Advanced High Strength Sheet Steels for Automotive Applications (2004 Winter Park. International Conference on Advanced High Strength Sheet Steels for Automotive Applications proceedings: June 6-9, 2004, Winter Park, Colorado. Edited by Ashburn Ronald E, Baker Margaret A, Association for Iron & Steel Technology, and Colorado School of Mines. Advanced Steel Processing and Products Research Center. Warrendale, PA: Association for Iron & Steel Technology, 2004.

Guk, Sergey. Der Zusammenhang zwischen Gefügeaufbau und Stoffluss in Prozessen der Blechumformung. Freiberg: Technische Universität Bergakademie Freiberg, 2006.

Pozhivanov, Mikhail. Vyplavka stali dli︠a︡ avtolista. Moskva: Interkontakt Nauka, 2006.

Society, Iron and Steel, ed. Sheet steel: Carbon, high strength low alloy, alloy, uncoated, metallic coated, coil coated, coils, cut lengths, corrugated products. Warrendale, Pa: Iron and Steel Society, 1999.

M, Cobb Harold, and Iron and Steel Society, eds. Steel products manual.: Carbon, high strength low alloy, and alloy coils and cut lengths (including coated products). Warrendale, PA: Iron and Steel Society, 1988.

Makarov, V. M. Rulonirovannye sosudy vysokogo davlenii͡a︡. Moskva: "Mashinostroenie", 1985.

Averkiev, A. I͡U. Metody ot͡senki shtampuemosti listovogo metalla. Moskva: "Mashinostroenie", 1985.

United States International Trade Commission. Sheet piling from Canada: Determination of the Commission in investigation no. 731-TA-52 (final) under the Tariff Act of 1930, together with the information obtained in the investigation. Washington, DC: U.S. International Trade Commission, 1991.

International Workshop on Magnetic Properties of Electrical Sheet Steel under Two-Dimensional Excitation (1st 1991 Physikalisch-Technische Bundesanstalt). First International Workshop on Magnetic Properties of Electrical Sheet Steel under Two-Dimensional Excitation: Proceedings of the 93. PTB-Seminar, Physikalisch-Technische Bundesanstalt, Braunschweig (Germany), 16. and 17.9. 1991. Braunschweig: PTB, 1992.

Commission, United States International Trade. U.S. global competitiveness: Steel sheet and strip industry : report to the Committee on Finance, U.S. Senate Investigation no. 332-231 under secion 332(g) of the Tariff Act of 1930. Washington, DC: U.S. International Trade Commission, 1988.

Commission, United States International Trade. U.S. global competitiveness: Steel sheet and strip industry : report to the Committee on Finance, U.S. Senate Investigation no. 332-231 under secion 332(g) of the Tariff Act of 1930. Washington, DC: U.S. International Trade Commission, 1988.

United States International Trade Commission. U.S. global competitiveness: Steel sheet and strip industry : report to the Committee on Finance, U.S. Senate Investigation no. 332-231 under secion 332(g) of the Tariff Act of 1930. Washington, DC: U.S. International Trade Commission, 1988.

International Conference on Zinc and Zinc Alloy Coated Steel Sheet (5th 2001 Brussels, Belgium). 5th International Conference on Zinc and Zinc Alloy Coated Steel Sheet: GALVATECH '2001 : June 26-28, 2001, Brussels, Belgium. Edited by Lamberights Marcel. Düsseldorf: Verlag Stahleisen, 2001.

United States International Trade Commission. U.S. global competitiveness: Steel sheet and strip industry : report to the Committee on Finance, U.S. Senate Investigation no. 332-231 under secion 332(g) of the Tariff Act of 1930. Washington, DC: U.S. International Trade Commission, 1988.

International, Conference on Zinc and Zinc Alloy Coated Steel Sheet (6th 2004 Chicago IL U. S. A. ). 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet: GALVATECH '04, April 4-7, 2004. Warrendale, PA: Association for Iron & Steel Technology, 2004.

Yu, Wei-wen. Cold-formed steel design. 4th ed. Hoboken, N.J: John Wiley & Sons, 2010.

International, Symposium on Interstitial Free Steel Sheet: Processing Fabrication and Properties (1991 Ottawa Ont ). Interstitial free steel sheet: Processing, fabrication and properties : proceedings of the international symposium, August 19-20, 1991, Ottawa, Ontario, Canada. Montréal: Canadian Institute of Mining, Metallurgy and Petroleum, 1991.

D, Zheleznov I͡U. Sistemnye osnovy intensifikat͡sii proizvodstva shirokopolosovoĭ stali. Moskva: "Metallurgii͡a", 1986.

1937-, Yamakawa Kōji, and Fujikawa Hisao, eds. Recent advances in coated steels used for automobile. Amsterdam: Elsevier, 1996.

Konovalov, I͡Uriĭ Vi͡acheslavovich. Raschet parametrov listovoĭ prokatki: Spravochnik. Moskva: "Metallurgii͡a", 1986.

Hartman, Richard J. Report of investigation of the effect of transverse loads on the behavior of Z-shape steel sheet piling. New York: Hartman Engineering, 1997.

E, Dolzhenkov F., ed. Intensifikat͡s︡ii͡a︡ proizvodstva listovoĭ stali. Kiev: "Tėkhnika", 1990.

Engineers, Society of Automotive, ed. Advances and trends in automotive sheet steel stamping. Warrendale, Pa: Society of Automotive Engineers, 1988.

Yu, Wei-wen. Cold-formed steel design. 2nd ed. New York: Wiley, 1991.

R, Marder A., Metallurgical Society of AIME. Ferrous Metallurgical Committee., TMS Ferrous Metallurgy Committee., Minerals, Metals and Materials Society. Meeting, and International Conference on the Physical Metallurgy of Zinc Coated Steels: Processing, Structure, and Properties (1994 : San Francisco, Calif.), eds. The Physical metallurgy of zinc coated steel: Proceedings of an international conference sponsored by the Ferrous Metallurgy Committee of TMS/AIME held at the TMS Annual Meeting in San Francisco, California, February 27-March 3, 1994. Warrendale, Pa: Minerals, Metals & Materials Society, 1994.

United States International Trade Commission. U.S. global competitiveness: Steel sheet and strip industry : report to the Committee on Finance, U.S. Senate Investigation no. 332-231 under secion 332(g) of the Tariff Act of 1930. Washington, DC: U.S. International Trade Commission, 1988.