Relevant bibliographies by topics / RSCM

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'RSCM'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 May 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'RSCM.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "RSCM"

1

Andrej Kupecsek and Juliana Monárová. "The influence of fertilization and tillage method on the formation root system capacity and grain production of spring barley." Acta Agraria Debreceniensis, no. 44 (November 20, 2011): 89–93. http://dx.doi.org/10.34101/actaagrar/44/2613.

Full text
Abstract:
To evaluate the interaction of year x variety, year x tillage method and year x fertilization on the grain yield and root system capacity (RSC) of spring barley, we ran polyfactorial field trials in agroecological conditions of a warm corn production area in Slovakia, at Malanta, in 2009 and 2010. The RSC measurements were done using LCR - meter at a frequency of 1 kHz and they took place in four growth stages: at leaf development in the stage of four leaves (RSC1), in full tillering (RSC2), in the stage heading (RSC 3) and at the stage of ripening (RSC4). The values of grain yield, RSC1, RSC2, RSC3, RSC4 reached in 2009 comparison to 2010 were significantly lower. The highest yield in 2009 was reached by variety Marthe (4.49 t.ha-1) and by variety Bojos (7.19 t ha-1) in 2010. The highest values of RSC in observed growth stages were achieved by variety Bojos in 2009, and in 2010 also besides RSC1. Within both years, difference in yields between tillage methods was not observed. The values of RSC in growth stage of 4 leaves and tillering was higher at conventional tillage, butthe values of RSC3 and RSC4 were higher with minimized tillage. The highest grain yield and values of RSC in every growth stage were achieved on the fertilization variant “c“ in 2009 and on the fertilization variant “b“ in 2010. The correlation relationships between grain yield and RSC were significant and positive in every growth stage. The strongest relationship was found among grain yield and RSC (r=0.6047).
APA, Harvard, Vancouver, ISO, and other styles
2

Behera, Ajay Kumar, Sasmita Mohapatra, Rabindra Mahapatra, and Harish Das. "Effect of Big Data Analytics in Reverse Supply Chain." International Journal of Information Systems and Supply Chain Management 15, no. 1 (January 2022): 1–14. http://dx.doi.org/10.4018/ijisscm.287128.

Full text
Abstract:
The main purpose of this paper is to know about the recent status of big data analytics (BDA) on various manufacturing and reverse supply chain levels (RSCL) in Indian industries. In particular, it emphasises on understanding of BDA concept in Indian industries and proposes a structure to examine industries’ development in executing BDA extends in reverse supply chain management (RSCM). A survey was conducted through questionnaires on RSCM levels of 330 industries. Of the 330 surveys that were mailed, 125 completed surveys were returned, corresponding to a response rate of 37.87 percent, which was slightly greater than previous studies (Queiroz and Telles, 2018).The information of Indian industries with respect to BDA, the hurdles with boundaries to BDA-venture reception, and the connection with reverse supply chain levels and BDA learning were recognized.
APA, Harvard, Vancouver, ISO, and other styles
3

Ali, Jamshid. "Environmental Resilience: Transition to regenerative supply chain management." AIMS Environmental Science 11, no. 2 (2024): 107–28. http://dx.doi.org/10.3934/environsci.2024007.

Full text
Abstract:
<abstract> <p>Global supply chains face mounting pressures for sustainability, necessitating a shift from Green Supply Chain Management (GSCM) towards Regenerative Supply Chain Management (RSCM) to address environmental concerns and enhance Resilience. This transition addresses environmental concerns while improving and supporting Resilience within supply networks. My aims were twofold: (1) To assess the resilience-enhancing mechanisms during the transition to RSCM through a comprehensive review process, and (2) to uncover critical factors and themes of the RSCM. The study employed qualitative interviews as the primary method to collect data using a structured questionnaire. The study adopted snowball sampling based on the referral and recommendation of the respondents. The study investigated vital strategies and challenges for adopting RSCM, explicitly focusing on environmental sustainability. The results indicated that the transition emphasizes a shift from harm reduction to ecosystem restoration, highlighting the importance of environmental restoration in RSCM. Additionally, RSCM places a pronounced emphasis on resilience-building strategies compared to GSCM, underscoring the need for more comprehensive integration of Resilience within supply chains during this transition, particularly in an environmental context. I also developed a framework illustrating the transition from GSCM to RSCM, emphasizing environmental considerations. Additionally, this study contributes novel insights into the dynamic landscape of sustainable supply chain management, emphasizing the importance of resilience-building strategies, particularly in an environmental context, during the shift to RSCM.</p> </abstract>
APA, Harvard, Vancouver, ISO, and other styles
4

Indarti, Junita, Lucas Christiawan, Dalri Suhartomo, Caroline Caroline, and Ditha Loho. "Postpartum contraceptive use among pregnant women who delivered at Cipto Mangunkusumo General Hospital: A descriptive study." Majalah Obstetri & Ginekologi 29, no. 3 (November 25, 2021): 124. http://dx.doi.org/10.20473/mog.v29i32021.124-128.

Full text
Abstract:
HIGHLIGHT1. As maternal mortality rate (MMR) is still high, there should be ways to reduce the rate, one of which is the prevention of conception through contraceptive methods. 2. A descriptive study was conducted to all patients giving birth in a national hospital between 2016 to 2019 covering data on the patients, including age, parity, the origin of referral, and type of contraception.3. Most patients who gave birth in the hospital had postpartum contraception, especially permanent contraception and long-term contraception. ABSTRACTObjectives: The maternal mortality rate in Indonesia is one of the highest in the world at 305 out of 100.000 live birth. One of the best ways to reduce MMR is conception prevention through contraceptive methods. According to 2018 Demographic and Health Survey, Indonesia’s Contraceptive Prevalence Rate is as low as 57%, not even reaching the 2015 Millenium Development Goals target of 65%. We conducted a study on postpartum contraceptive use in Dr. Cipto Mangunkusumo National Central General Hospital (RSCM) to see the use of contraception in RSCM so that it can be an example of how contraception is used in RSCM for patients who give birth here.Materials and Methods: A descriptive study was conducted from all patients giving birth in RSCM from 2016 until 2019, data including patient data, consisting of patient age, parity, the origin of referral, and type of contraception, are input from the medical recordResults: There were 5,596 deliveries, consisting of 3,785 C-sections and 1,811 vaginal deliveries. As much as 5332 (95.3%) of subjects had postpartum contraception, 725 (13.67%) of which received tubectomy, and most of which received long-term contraceptive methods (IUD 4414 (82.78%) and implant 44 (0.82%)). As many as 1.065 subjects were more than 35 years of age, 6,2% of which did not use any postpartum contraception. As many as 984 subjects were RSCM bookcases, 6,9% of which did not use any postpartum contraception.Conclusion: Most patients giving birth in RSCM had postpartum contraception, especially permanent contraception and long-term contraception. The contraception profile in RSCM alone can neither describe nor represent the condition and distribution of contraceptive methods in Indonesia because RSCM is a national referral and medical education center whose cases are relatively more complex.
APA, Harvard, Vancouver, ISO, and other styles
5

Shawon, Ashifur Rahman, Jonghan Ko, Bokeun Ha, Seungtaek Jeong, Dong Kwan Kim, and Han-Yong Kim. "Assessment of a Proximal Sensing-integrated Crop Model for Simulation of Soybean Growth and Yield." Remote Sensing 12, no. 3 (January 28, 2020): 410. http://dx.doi.org/10.3390/rs12030410.

Full text
Abstract:
A remote sensing-integrated crop model (RSCM) able to simulate crop growth processes using proximal or remote sensing data was formulated for simulation of soybean through estimating parameters required for modelling. The RSCM-soybean was then evaluated for its capability of simulating leaf area index (LAI), above-ground dry mass (AGDM), and yield, utilising the proximally sensed data integration into the modelling procedure. Field experiments were performed at two sites, one in 2017 and 2018 at Chonnam National University, Gwangju, and the other in 2017 at Jonnam Agricultural Research and Extension Services in Naju, Chonnam province, South Korea. The estimated parameters of radiation use efficiency, light extinction coefficient, and specific leaf area were 1.65 g MJ−1, 0.71, and 0.017 m2 g−1, respectively. Simulated LAI and AGDM values agreed with the measured values with significant model efficiencies in both calibration and validation, meaning that the proximal sensing data were effectively integrated into the crop model. The RSCM reproduced soybean yields in significant agreement with the measured yields in the model assessment. The study results demonstrate that the well-calibrated RSCM-soybean scheme can reproduce soybean growth and yield using simple input requirement and proximal sensing data. RSCM-soybean is easy to use and applicable to various soybean monitoring projects.
APA, Harvard, Vancouver, ISO, and other styles
6

Rantitsch, Gerd, Gerhard Bryda, and Hans-Jürgen Gawlick. "Conodont thermometry by Raman spectroscopy on carbonaceous material: a case study from the Northern Calcareous Alps (Mürzalpen Nappe, Eastern Alps)." Austrian Journal of Earth Sciences 113, no. 1-2 (June 1, 2020): 201–10. http://dx.doi.org/10.17738/ajes.2020.0012.

Full text
Abstract:
Abstract Carnian metapelites from the southeastern segment of the Mürzalpen Nappe (Northern Calcareous Alps, Eastern Alps) were heated to 280-310 °C, estimated by Raman spectroscopy of carbonaceous material (RSCM). This temperature range is correlated to a Color Alteration Index of 5.0-6.5, determined on conodonts from adjacent Anisian to Norian carbonates. Average RSCM temperatures estimated on the conodonts are biased towards higher temperatures. The spectral characteristics of the conodont apatite suggest a composition altered during progressive recrystallization, influencing the band parameters of the included carbonaceous matter. Consequently, accurate conodont RSCM thermometry needs an assessment of apatite alteration.
APA, Harvard, Vancouver, ISO, and other styles
7

Wankmüller, Christian, and Gerald Reiner. "Coordination, cooperation and collaboration in relief supply chain management." Journal of Business Economics 90, no. 2 (September 24, 2019): 239–76. http://dx.doi.org/10.1007/s11573-019-00945-2.

Full text
Abstract:
Abstract In recent years, an increasing number of natural and man-made disasters has demonstrated that a working relief supply chain management (RSCM) is crucial in order to alleviate the suffering of the affected population. Coordination, cooperation and collaboration within RSCM is essential for overcoming these destructive incidents. This paper explores the research undertaken in recent years, focusing on coordination, cooperation and collaboration in the field of supply chain management (SCM) and RSCM in order to provide unique definitions of these concepts taking the disaster setting into consideration. A systematic literature review including 202 academic papers published from 1996 onwards in top journals dealing with commercial supply and relief supply chain coordination, cooperation and collaboration is applied. In order to answer the underlying research questions in a proper way, a descriptive analysis and qualitative and quantitative content analysis of the papers are conducted. Descriptive results indicate that RSCM coordination, cooperation and collaboration have increasingly shifted into the focus of scientific research since 2001/2004 (i.e., 9/11 and the Indian Ocean Tsunami). Based on the qualitative content analysis, clear definitions of the terms coordination, cooperation and collaboration in SCM and RSCM were elaborated. The research landscape, as a result of the quantitative content analysis, allowed the identification of three issues that need to be addressed in future research work.
APA, Harvard, Vancouver, ISO, and other styles
8

Dakers, Lionel. "The RSCM: Past, Present... and Future." Musical Times 128, no. 1732 (June 1987): 349. http://dx.doi.org/10.2307/1193762.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Heriwardito, Aldy, Adhrie Sugiarto, Bakti Setiadi, Anggara Gilang Dwiputra, Noor Hafidz, and Andi Ade Wijaya Ramlan. "Skor Kelelahan pada Peserta Didik Anestesiologi dan Terapi Intensif dan Faktor-Faktor yang Mempengaruhi." Majalah Anestesia & Critical Care 40, no. 1 (March 12, 2022): 28–35. http://dx.doi.org/10.55497/majanestcricar.v40i1.252.

Full text
Abstract:
Latar Belakang: Prevalensi kelelahan secara global bervariasi antara 2,36-75,7%. Kelelahan merupakan konsekuensi yang dapat dialami oleh peserta Program Pendidikan Dokter Spesialis (PPDS) Anestesiologi dan Terapi Intensif Fakultas Kedokteran Universitasi Indonesia (FKUI) selama menjalami proses pendidikan. Penelitian ini dilakukan untuk mengetahui tingkat kelelahan pada PPDS Anestesiologi dan Terapi Intensif FKUI/RSCM setelah bertugas selama 24 jam di RSCM dengan menggunakan penilaian FAS, serta faktor-faktor yang memengaruhinya. Metode: Metode penelitian adalah studi potong lintang dan acak. Analisis dilakukan terhadap 36 subjek peserta PPDS Anestesiologi dan Terapi Intensif FKUI tahap paripurna, mandiri dan magang selama periode penelitian. Subjek diberikan kuesioner berisi pertanyaan mengenai faktor yang dapat memengaruhi tingkat kelelahan. Kelelahan secara subjektif diukur dengan Fatigue Assessment Scale (FAS) setelah peserta PPDS bekerja di Rumah Sakit dr.Cipto Mangunkussumo (RSCM) selama ≥ 24 jam. Hasil: Sebanyak 55,6% peserta PPDS Anestesiologi dan Terapi Intensif mengalami kelelahan seetelah bekerja di RSCM selama > 24 jam, dengan rerata skor kelelahan berdasarkan FAS adalah 23,6±4,2 yang berada diatas titik potong skor kelelahan dari FAS yaitu > 22. Kelelahan fisik memiliki rerata nilai yang lebih besar (15,19±2,7) dibandingkan dengan kelelahan mental (10,61±2,2) dengan perbedaaan yang bermakna (p<0.01). Kelelahan pada peserta PPDS Anestesiologi dan Terapi Intensif FKUI tidak dipengaruhi oleh karakteristik, gaya hidup dan karakteristik pekerjaan. Kesimpulan: PPDS Anestesiologi dan Terapi Intensif mengalami kelelahan fisik pasca bekerja selama >24 jam di RSCM. Kelelahan tersebut tidak dipengaruhi oleh faktor gaya hidup dan pola kerja.
APA, Harvard, Vancouver, ISO, and other styles
10

Rifky, Muhamad, NM Faizah, and Lucky Koryanto. "Design and Development of KPRI RSCM Employee Presence Attendance Application Using Android-Based QR Code." Journal Mobile Technologies (JMS) 1, no. 1 (February 10, 2023): 8–17. http://dx.doi.org/10.59431/jms.v1i1.129.

Full text
Abstract:
RSCM KPRI Services Cooperative is a cooperative that operates in 2 initial tasks, namely providing loans to members with light services and carrying out the distribution of basic goods from the government to members of each company or agency. make attendance. attendance attendance is part of the most important role in every body of work. Where attendance is one of the main supports that can motivate and support all work activities to be carried out in it, using the finger print system in attendance at the Cooperative office which is in the Dr. Cipto Mangunkusumo National General Hospital (RSCM) environment is very at risk of being exposed to various kinds of virus, and one of them is the Corona Virus which is still a pandemic, so that the KPRI RSCM Service Cooperative innovates in the employee attendance system by using a presence system using an Android-based QR Code, so that cooperative employees can take attendance using their personal cell phones. explains how to use the designed application system, namely the KPRI RSCM Employee Presence Application. It is hoped that this application can make it easier for employees to make attendance, and the Personnel section can more easily monitor the attendance of their employees utilizing the Android system as a tool or attendance system that makes it easier for companies and employees, especially at the KPRI RSCM Service Cooperative so that it reduces contact that can cause risk of exposure to the coronavirus.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "RSCM"

1

Radell, Ingrid Myhr. "Distributional justice in Swedish-global value chain partnerships for sustainable textile production : A case study on economic distribution within the Sweden Textile Water Initiative." Thesis, KTH, Hållbar utveckling, miljövetenskap och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-297665.

Full text
Abstract:
Due to the textile industry’s polluting impact on aquatic environments the Sweden Textile Water Initiative (STWI) was established. This Sida funded collaboration between SIWI (Stockholm International Water Institute), Swedish fashion brands and their suppliers received international recognition for their success in achieving tangible environmental results after implementing sustainability measures at the suppliers. However, the financing from Sida was only for a limited period of time and the projects lost momentum when the money ran out. Moreover, claims have been made that monetary savings which suppliers made from more efficient resource use has been subject to profit theft from the brands by reducing their order prices. Furthermore, the brands genuine desire to achieve sustainability in the supply chain is questioned by modest supplier nominations. Previous research shows problems in value chain management and how both intentional and unintentional actions affect power dynamics and other factors in the value chain. This research contributes to the sustainable supply chain management (SSCM) literature by including a Swedish partnership perspective. In addition, new research is continuously needed in sustainability and textile value chains as conditions in the industry change rapidly (such as increased environmental awareness, and not least the covid-19 pandemic).  The purpose of this thesis is to answer the research question; "Is there a pattern of economic benefits for sustainability efforts in the textile supply chain being unfairly distributed between stakeholders in international partnerships?" This is achieved by conducting a case study of the Sweden Textile Water Initiative (STWI), including a supplier survey, semi-structured interviews with brands and supplier representatives, as well as a literature study.  The results showed that no coherent definition of "fair" had been established within a STWI context, and although suppliers were the only ones to receive direct financial profits, brands still indicated that this was not necessarily unfair. Furthermore, it was discovered that order quantities had decreased, but that motivations for decrease could be due to a number of reasons; restructuring in business model, changed consumer behavior/demand, and order placement with other suppliers. Regarding the order price, the majority of suppliers considered that these had decreased, while brands unanimously claimed they had increased. Contradictions in the respondents' answers does not necessarily render their experiences untrue, as they rarely have direct financial transactions due to the structure of the value chain. Another result showed that the brands modest number of nominated suppliers was largely due to hesitation from suppliers to join the partnership, as well as brands focusing on strategic placement, and being more oriented towards where the projects will have the largest impact. Finally, the results led to a number of suggestions on how improved partnerships can be achieved.  The plethora of factors that affect the complex structure of the industry also leaves many opportunities to explore cause-effect relationships. Further research needs include mapping market-, upstream- and downstream- pressure on suppliers, definitions of justice and risk responsibility, driving forces leading to relocation of production countries and comparisons of environmental legislation related to textile production.
Till följd av den förorenande miljöpåverkan som textilproduktion har på vattendrag bildades partnerskapet Sweden Textile Water Initiative (STWI). Detta Sida-finansierade samarbete mellan SIWI (Stockholm International Water Institute), svenska modeföretag och deras leverantö rer erhöll internationellt erkännande för sin framgång med att nå konkreta miljöresultat efter implementering av hållbarhetsåtgärder hos leverantörerna. Finansieringen från Sida pågick dock endast under en begränsad tidsperiod och projekten förlorade momentum när pengarna tog slut. Dessutom har påståenden gjorts om att de monetära besparingar som leverantörer gjort genom effektivare resursanvändning har hamnat hos modeföretagen genom sänkta orderpriser. Vidare ifrågasätts modeföretagen genuina vilja att uppnå hållbarhet i leverantörskedjan av sparsamma leverantörsnomineringar till partnerskapet, då det indikerar vilja att vara delaktiga, utan transparens kring den egna värdekedjan. Tidigare forskning visar på problematik i värdekedjeledning samt hur både avsiktliga och oavsiktliga handlingar påverkar maktdynamik och andra faktorer i värdekedjan. Detta arbete avser att bidra till den större SSCM-litteraturen med ett partneskapsperspektiv mellan aktörerna i värdekejdan istället för topstyrt från varumärken. Dessutom behövs kontinuerligt ny intersektionell forskning inom textil värdekedjor eftersom förhållandena i branschen ändras snabbt (såsom ökad miljömedvetenhet och inte minst covid-19-pandemin).  Syftet med detta examensarbete är att besvara forskningsfrågan; “Finns det ett mönster av att ekonomiska vinster från hållbarhets-insatser i textil värdekedjan fördelas på ett orättvist sätt mellan intressenter i internationella partnerskap?”. Detta görs genom att utföra en fallstudie av Sweden Textile Water Initiative (STWI), inkluderande enkät till leverantörer, semi-strukturerade intervjuer med mode- företag och leverantörs representanter samt en litteraturstudie.  Resultaten påvisade att det saknades en gemensamt definierad tolkning av “orättvist” inom STWI och trots att leverantörer var de enda som erhöll direkt ekonomisk vinst indikerade ändå modeföretag att detta inte nödvändigtvis var orättvist. Vidare upptäcktes att orderkvantiteter hade minskat men att detta kunde bero på ett antal anledningar; omstrukturering i affärsmodell, förändrat konsumentbeteende/efterfrågan och orderplacering hos andra leverantörer, medan genomförande av STWI inte ansågs vara en betydande anledning. Gällande orderpris så ansåg majoriteten av leverantörer att dessa hade sjunkit medan modeföretag enhälligt hävdade att de hade ökat. Att det finns motsättningar i svaren betyder inte nödvändigtvis att deras erfarenheter är osanna, eftersom dessa aktörer sällan har direkta ekonomiska transaktioner till följd av värdekedjans struktur. Ett annat resultat visade att modeföretags låga antal nominerade leverantörer till stor del berodde på tveksamhet från leverantörer att medverka i partnerskapet samt att fokusering på leverantörer där åtgärder skulle ge störst nytta. Slutligen ledde resultaten till ett antal förslag på hur förbättrade partnerskap kan uppnås.  Överflödet av faktorer som påverkar den komplexa strukturen i textilindustrin lämnar många möjligheter att utforska orsakssamband. Ytterligare forskningsbehov inkluderar kartläggning av marknad-, uppströms- och nedströms tryck på leverantörer, definitioner av rättvisa och riskansvar, drivkrafter som leder till omlokalisering av produktionsländer och jämförelser av miljölagstiftning relaterad till textilproduktion.
APA, Harvard, Vancouver, ISO, and other styles
2

Poitrenaud, Thomas. "Le gisement périgranitique à tungstène et or de Salau (Pyrénées, France), histoire polyphasée d’un système minéralisé tardi-varisque." Thesis, Orléans, 2018. http://www.theses.fr/2018ORLE2002/document.

Full text
Abstract:
La chaine varisque ouest-européenne est une vaste province métallogénique qui abrite une large diversité de minéralisations. Une grande partie d’entre elles ont fait l'objet d'exploitations historiques, à l'instar de Salau(Pyrénées Centrales), le plus important gisement de tungstène français. Les résultats de terrain combinés aux études minéralogiques et géochimiques convergent pour montrer qu'il existe deux types de minéralisations superposées : (1) un skarn à silicates calciques, rare scheelite fine et sulfures disséminés ; (2) une brèche filonienne à sulfures massifs (pyrrhotite et chalcopyrite dominante), or et abondante scheelite grossière qui a constitué l’essentiel du minerai exploité. Cette brèche se localise dans des zones de cisaillement ductile-fragile(faille Véronique) recoupant la granodiorite. Les datations U/Pb sur zircon, apatite et scheelite situent le skarn contemporain de l'intrusion de la Fourque à 295±2 Ma alors que la brèche à sulfures massifs se forme environ6 Ma après, à 289±2 Ma. Ces minéralisations, issues de deux intrusions successives (granodiorite puis leucogranite), s’inscrivent dans l'évolution d'un modèle Intrusion Related Deposit. La mise en place de labrèche à forte teneur en or-scheelite est initiée par la focalisation progressive de la déformation régionale dans la Zone axiale des Pyrénées au sein de failles E-W dextres inverses. L'origine de l'or à l'échelle des Pyrénées pourrait s'expliquer en partie par une large répartition de ces minéralisations à forte teneur. La carte de paléotempératures RSCM a permis de localiser d’autres intrusions non affleurantes en étendant le district minéralisé sur plus de 7 km jusqu’à l’indice à W-Au d’Aurenère en Espagne
The Western European variscan belt is a vast metallogenic district which hosts a wide diversity of mineralizations. A large part of them have been historically exploited, such as Salau (Central Pyrenees), the most important French tungsten deposit. The field results combined with the mineralogical and geochemical studies converge to show that it exists two superimposed ore types: (1) a calcic silicates skarn with rare fine grainedscheelite and disseminated sulphides; (2) a mineralized breccia with massive sulphides (pyrrhotiteand chalcopyrite dominant), gold and abundant coarse-grained scheelite which have constituted the main part of the exploited ore. This breccia is localized in ductile-fragile shear-zones (Veronique fault) which crosscut the granodiorite. U/Pb datings on zircon, apatite and scheelite place the skarn, contemporaneous of the LaFourque intrusion at 295±2 Ma while the massive sulphides breccia was formed ca. 6 Ma later at 289±2 Ma.These mineralizations, from two successive intrusions (granodiorite then leucogranite), belong to the evolution of an Intrusion Related Deposit model. The emplacement of the high grade gold and scheelite breccia was initiated by the progressive focalization of the regional deformation in the Axial Zone of the Pyrenees within EWdextral-reverse faults. The source of gold at the Pyrenees scale could be explained in part by this type of high-grade mineralizations. The RSCM paleo-temperature map has made possible to locate other undercover intrusions, extending the mineralized district over more than 7 km until the W-Au Aurenere occurrence in Spain
APA, Harvard, Vancouver, ISO, and other styles
3

Brunsmann, Quentin. "L’arc des Alpes occidentales : cinématique et mécanismes de formation au jour de nouvelles données structurales et paléomagnétiques." Electronic Thesis or Diss., Sorbonne université, 2023. http://www.theses.fr/2023SORUS299.

Full text
Abstract:
La formation des arcs orogéniques résulte de plusieurs processus tectoniques ayant agi sur la configuration pré-orogénique, pré-collisionnelle ou sur la tectonique collisionelle. La formation de l’arc des Alpes occidentales est attribuée à l’indentation collisionnelle de la marge Européenne et du prisme orogénique par l’indenteur Adriatique. Cependant la direction d’indentation, sa composante rotationnelle et les mécanismes d’accommodation ne font pas consensus et de nombreux modèles cinématiques proposent des explications incompatibles entre elles, afin d’expliquer la géométrie arquée de la chaîne. L’évaluation des différents modèles de formation de l’arc des Alpes occidentales met en avant la probabilité de l’existence d’un proto-arc hérité de la phase de subduction et amplifié par l’indentation Adriatique, essentiellement vers le NW. Ces deux phases permettent d’expliquer la formation de l’arc à l’exception de sa terminaison méridionale E-W. En effet l’orientation des structures de l’arc de Castellane semble héritée des structures pyrénéo-provençales, antérieures à la collision Alpine et réactivées par une convergence N-S post-Tortonien (~12 Ma), sans lien direct avec la collision Alpine. Concernant la direction WNW-ESE des Alpes Ligures, elle semble être influencée par la rotation antihoraire de 50° des Apennins, liée au rollback du slab Adriatique, contemporain de l’ouverture du bassin Liguro-Provençal (23-15 Ma). Une compilation exhaustive des données de paléomagnétisme dans les Alpes a été construite et complétée par 11 sites de nouvelles données. L’étude des rotations d’axe vertical de ces données a permis de réfuter l’existence d’une rotation significative de la plaque Adriatique durant la collision Alpine. Les tests oroclinaux, réalisés à plusieurs échelles, mettent en évidence que l’arc des Alpes occidentales se développe sous l’effet de l’indentation vers le NW à partir d’un prisme orogénique déjà faiblement arqué avant la collision. La marge Européenne ne semble pas subir de rotation, impliquant une propagation d’un arc hérité de la marge passive Mésozoique. La géométrie actuelle de l’arc serait principalement contrôlée par la structure pré-collisionnelle de la marge Européenne que le prisme orogénique adopte sous l’effet de l’indentation Adriatique vers le NW. Sa terminaison méridionale aurait une histoire géodynamique différente. Elle serait le résultat de l’héritage pyrénéo-provençal avec réactivation Miocène dans la Zone Externe, et d’une rotation antihoraire de la Zone Interne, en lien avec l’orogénèse Apennine. L’indentation Adriatique, parfois interprétée comme principalement vers l’ouest, serait accommodée au Sud de l’arc par un décrochement senestre d’environs 50km selon la littérature. Cette interprétation est testée par une étude structurale de terrain, associée à une analyse géostatistique des trajectoires en carte des plans de schistosité et de stratigraphie. Les résultats semblent confirmer l’existence de décrochements senestres associés à une tectonique transpressive syn-collisionnelle. Cependant l’importance de ces décrochements paraît marginale en comparaison des 50 km de déplacement supposé. Cette analyse structurale a par ailleurs mis en évidence une déformation polyphasée dans le Dauphinois, associée à une mylonitisation localisée et caractérisée par un étirement N120°. L’évaluation des températures maximales par la méthode RSCM indique des Tmax supérieures à 350°C à la bordure Nord de l’Argentera, atteignant localement 400°C correspondant à un métamorphisme régional plus important que celui généralement attribué à ce secteur des Alpes. Ce métamorphisme est principalement associé à l’enfouissement tectonique par le passage des nappes internes sur le Dauphinois au début de la collision. Dans la région du massif de l’Argentera, les Tmax dans le Dauphinois correspondent à une profondeur d’enfouissement de 11 km au niveau du Front Pennique diminuant jusqu’à 4 km à l’aplomb de l’arc de Castellane
The formation of orogenic arcs results from several tectonic processes that may have affected the pre-orogenic, pre-collisional tectonic setting, or the collisional tectonic. The formation of the Western Alpine arc is classically attributed to collisional indentation of the European margin and the orogenic prism by the Adriatic indenter. However, the direction of indentation, its rotational component, or the accommodation mechanisms of this indentation are not agreed upon and the numerous kinematic models of the arcuate geometry of the chain are not compatible with one another. The evaluation of the different models of the formation of the Western Alpine arc allows to put forward the probability of the existence of a proto-arc inherited from the subduction phase, and amplified by the Adriatic indentation towards the NW. These two processes explain the formation of the Western Alpine arc, except for its E-W southern termination. Indeed, the orientation of the Castellane Arc seems to be mainly inherited from the Pyrenean-Provençal structures, preceding Alpine collision, and reactivated by post-Tortonian (~12 Ma) N-S convergence, not directly related to Alpine collision. Concerning the WNW-ESE direction of the southern termination of the arc, which forms the Ligurian Alps, it seems to have rotated counterclockwise by 50° with the northern Apennines, linked to the rollback of the Adriatic slab, contemporary with the opening of the Liguro-Provençal basin (23-15 Ma). A compilation of paleomagnetic data in the Alps was constructed and completed with 11 new data sites. The study of vertical-axis rotations, estimated by paleomagnetic analysis refutes the existence of significant rotation of the Adriatic plate during Alpine collision. Oroclinal tests, carried out at several scales, show that the Western Alpine arc develops under the effect of indentation towards the NW from an orogenic prism that is already weakly arcuate before the onset of collision. Furthermore, the European continental margin does not seem to undergo significant rotation, implying propagation of an arc that is mainly inherited from the Mesozoic passive margin. The present geometry of the Western Alpine arc would be mainly controlled by the pre-collisional structure of the European margin that the orogenic prism adopts under the effect of NW Adriatic indentation. Its southern termination would have a different geodynamic history. It would be the result of Pyrenean-Provençal inheritance, reactivated during the Miocene in the External Zone, and of an anti-clockwise rotation of the Internal Zone, linked to the Apennine orogeny. Adriatic indentation, sometimes assumed to follow a westward trajectory, would be accommodated to the south of the arc by a sinistral shear zone of about 50km according to literature. This interpretation is tested by a structural field study, associated with a geostatistical analysis of map trajectories of the schistosity and stratigraphy planes. The results confirm the existence of sinistral shear zones associated with syn-collisional transpressive tectonics. However, these faults seem to represent minor structures with respect to the accommodation of 50 km of displacement. This structural analysis has also highlighted polyphase deformation in the Dauphinois, associated with localised mylonitisation is characterised by a N120° stretching. The assessment of the maximum temperatures by the RSCM method indicates temperatures above 350°C at the northern edge of the Argentera, reaching locally 400°C, corresponding to a regional metamorphism that is more important than the one attributed to this sector of the Alps. This metamorphism is mainly associated with tectonic burial due to thrusting of the internal nappes on the Dauphinois at the beginning of collision. In the Argentera Massif region, the Tmax in the Dauphinois correspond to a burial depth of 11.3 ± 1 km at the level of the Pennine Front, decreasing to 4 km below the Castellane arc
APA, Harvard, Vancouver, ISO, and other styles
4

Harrison, Simon Andrew. "Characterisation of the mechanisms of magnetisation change in permanent magnet materials through the interpretation of hysteresis measurements." University of Western Australia. School of Physics, 2004. http://theses.library.uwa.edu.au/adt-WU2004.0048.

Full text
Abstract:
The mechanisms by which magnetisation changes occur in magnetic materials may be investigated by a variety of hysteresis measurements. During this study both alternating and rotational hysteresis measurements were used to characterise the mechanisms of magnetisation change in a number of permanent magnet materials. Studies of the time dependence of magnetisation, remanent magnetisations and the dependence of the reversible magnetisation on the irreversible magnetisation were undertaken. These studies revealed that in sintered rare-earth iron magnets the magnetisation change is predominately controlled by domain nucleation, with a lesser contribution from domain wall pinning within the boundary regions of the grains. Similar mechanisms control the magnetisation change in the larger grains of melt-quenched rare-earth iron magnets. In the single domain grains of the melt-quenched materials incoherent rotation mechanisms control the changes of magnetisation. Magnetisation change in MnAlC and sintered AlNiCo was found to be controlled by domain wall pinning within the interior of the grains of the materials. Two devices were constructed for the measurement of rotational hysteresis. The first measures the angular acceleration of a sample set spinning in a magnetic field, from which the rotational hysteresis loss may be determined. The second employs rotating search coils to make direct measurements of the component of magnetisation that contributes to rotational hysteresis loss during the rotation of a sample in a field. Both devices were found to produce data consistent with that in the literature and to be useful for the characterisation of rotational hysteresis in permanent magnet materials. A simple model was used to examine the dependence of rotational hysteresis loss on various material parameters. It was found that the value of the rotational hysteresis integral is dependent on interactions and to a lesser extent distributions in anisotropy. This is contrary to assumptions commonly made in the literature but consistent with published experimental data, which has been reinterpreted. Measurements of rotational hysteresis losses in the materials studied were found to be effected by geometric demagnetisation effects. A method by which such data may be corrected for these effects is proposed. Following correction and consideration of the interactions within the materials, the rotational hysteresis data was found to be consistent with the characterisations performed in linearly alternating fields.
APA, Harvard, Vancouver, ISO, and other styles
5

Delchini, Sylvain. "Etude tectono-thermique d'un segment orogénique varisque à histoire géologique complexe : analyse structurale, géochronologique et thermique du massif des Jebilet, de l'extension à la compression." Thesis, Orléans, 2018. http://www.theses.fr/2018ORLE2003/document.

Full text
Abstract:
Cette thèse présente la reconstruction de l’histoire tectono-thermique du massif varisque des Jebilet (Maroc) à fort potentiel minier, depuis son évolution pré-orogénique au Dévonien supérieur-Carbonifère inférieur jusqu’à sa structuration pendant l’orogénèse varisque-alléghanienne au Carbonifère supérieur-Permien inférieur. Pour répondre à cette problématique, ce travail s’organise autour de deux approches : (1) l’une métrologique appliquée à la géothermométrie Raman sur la matière carbonée (RSCM) et (2) l’autre intégrant une étude structurale, géochronologique et une analyse de la thermicité.L’approche métrologique a permis de valider l’applicabilité du géothermomètre RSCM (1) dans un contexte de métamorphisme polyphasé, (2) pour des roches carbonatées et des skarns des Jebilet et (3) de proposer un nouveau paramètre Raman RSA permettant de mieux préciser les températures supérieures à 500°C et d’étendre l’applicabilité de la méthode jusqu’à des températures maximales qui atteignent les 700°C.A partir de l’approche intégrée, trois épisodes tectono-thermiques ont été mis en évidence. Le premier épisode D₀ correspond à une tectonique extensive permettant l’ouverture du bassin des Jebilet au Dévonien supérieur-Carbonifère inférieur. Cette tectonique extensive est accompagnée par une anomalie thermique supérieure à 500°C déduites des mesures de géothermométrie RSCM (TRSCM) et par une importante activité magmatique bimodale et granodioritique datée dans ce travail entre 358 ± 7 et 336 ± 4 Ma. Au Carbonifère supérieur débute la phase compressive structurant le massif des Jebilet avec la mise en place de nappes superficielles au Namuro-Westphalien (D₁), suivie par la phase varisque majeure (D₂). L’analyse structurale a permis de montrer une évolution progressive du régime de déformation de D2 depuis une compression coaxiale à une transpression dextre compatible avec un raccourcissement horizontal WNW-ESE à NW-SE. D₂₁ est associée à deux événements thermiques, le premier syn-tectonique de moyenne température (300°
This thesis presents the reconstruction of the tectono-thermal history of the Paleozoic Jebilet massif (Morocco), from its pre-orogenic evolution at the Upper Devonian-Lower Carboniferous to its structuration during the variscan-alleghanian orogeny at the Upper Carboniferous-Lower Permian. To address this issue, this work is organized around two approaches: (1) one metrological applied to the Raman Spectroscopy of Carbonaceous Matterial (RSCM) and (2) the other integrating a structural and geochronological study and a thermicity analysis.The metrological approach allowed to validate the applicability of the RSCM geothermometer (1) in a context of polyphase metamorphism, (2) for carbonate rocks and skarns of Jebilet and (3) to propose a new parameter Raman RSA allowing to better specify temperatures above 500°C and extend the applicability of the method to maximum temperatures of up to 700°C.From the integrated approach, three tectono-thermal episodes were highlighted. The first episode D₀, corresponds to an extensive tectonic allowing the opening of the Jebilet basin at the Upper Devonian-Lower Carboniferous. This opening is accompanied by a HT thermal anomaly as shown by the important bimodal and granodioritic magmatic activity dated between 358 ± 7 Ma and 336 ± 4 Ma and the TRSCM higher than 500°C recorded by the rocks. During Upper Carboniferous, the compressive phase structuring the Jebilet massif begins with the emplacement of superficial nappes (D₁), followed by the variscan major phase (D2). Structural analysis showed a gradual evolution of D₂ deformation regime from coaxial compression to dextral transpression consistent with WNW-ESE to NW-SE horizontal shortening. D₂ is associated with two thermal events, the first is syn-tectonic with TRSCM between 300 and 400°C, and the second is syn- to post-tectonic with TRSCM between 600 and 660°C.This tectono-thermal context would be the expression of geodynamic processes involving from the Upper Devonian a delamination of the Rheic lithosphere by "slab break-off" or "slab roll-back" which would induce (1) the rise of hot asthenospheric current, and (2) the clockwise rotation of Gondwana and its gradual amalgamation with Laurussia structuring the variscan-alleghanian belt during the Upper Carboniferous-Lower Permian
APA, Harvard, Vancouver, ISO, and other styles
6

Bessière, Eloïse. "Évolution géodynamique des zones internes des cordillères bétiques (Andalousie, Espagne) : Apports d'une étude pluridisciplinaire du complexe Alpujárride." Thesis, Orléans, 2019. http://www.theses.fr/2019ORLE3095.

Full text
Abstract:
Les cordillères Bético-Rifaines sont situées en Méditerranée occidentale, où elles forment un arc étroit. Comparée à d’autres segments orogéniques, leur évolution géodynamique reste extrêmement discutée en raison d’une histoire tectono-métamorphique polyphasée depuis le rifting Mésozoïque, jusqu’à l’histoire alpine incluant subduction,collision et effondrement tardi-orogénique. Cette thèse s’est focalisée sur deux problématiques restant activement débattues et qui concernent le complexe Alpujárride, appartenant aux Zones Internes (ZI) des Cordillères Bétiques.Deux zones d’étude ont été ciblées, avec (i) les massifs péridotitiques affleurant à l’ouest et dont les modalités de mise en place restent énigmatiques et (ii) les unités tectoniques affleurant à l’est et dans lesquelles les paragenèses de haute pression-basse température (HP/BT) en lien avec l’épisode de subduction alpine, sont les mieux préservées mais dont les contraintes temporelles sont largement incertaines.Ce travail de recherche s’est attaché à utiliser une approche multi-échelles, depuis celle de l’affleurement jusqu’à celle de la région, et pluridisciplinaire, avec un travail de cartographie détaillée, des observations structurales et pétrographiques, de la thermométrie Raman et des datations 40Ar/39Ar. Nos résultats mettent en évidence(i) l’exhumation du massif péridotitique de Ronda dans un contexte d’hyper-amincissement de la croûte continentale résultant d’un épisode de rifting et (ii) la fin de l’épisode métamorphique de HP/BT vers 38 Ma avec l’initiation du retrait du panneau plongeant et l’ouverture d’un bassin d’arrière-arc, associée à un métamorphisme de haute température-basse pression (HT/BP). C’est dans ce contexte extensif que le complexe Alpujárride s’exhume après une phase majeure d’amincissement crustal. Cet épisode de métamorphisme de HT/BP prend fin avec la mise en place des ZI des Cordillères Bético-Rifaines sur les marges Ibérie et Afrique, vers 20 Ma
The Betic-Rif Cordillera, located in the western Mediterranean region, forms a narrow, arcuate orogenic belt. By comparison with other orogenic belts in the Mediterranean realm, its geodynamic evolution is higly controversial because of a long and complex tectono-metamorphic history, including the Mesozoic rifting and the Alpineorogenesis where subduction, collisional and post-orogenic extensional events are successively recorded. This Ph.D.thesis aims to address two major issues about the geodynamic evolution of the Alpujárride Complex, a group of metamorphic units that belong to the Internal Zones of the Betic Cordillera. Two study areas have been investigated with (i) the peridotitic massifs located in the western part of this complex whose mechanisms and timing of exhumation remain unclear and (ii) the tectonic units located further east that display well-preserved high pressure low temperature (HP/LT) mineral parageneses related to the Alpine subduction episode but with high uncertainties regarding the age of this metamorphic event.This work has been carried out by following a multi-scale and multi-disciplinary approach, from the outcrop- to the regional-scale, including detailed field mapping, structural measurements, petrographic observations, Ramanthermometry and 40Ar/39Ar dating. Our results evidence (i) the exhumation of the Ronda peridotite controlled by anhyper-extension event associated with a rifting stage and (ii) the end of the HP/LT peak conditions around 38 Ma,juste before the inception of the slab roll-back and back-arc opening associated with a high temperature-lowpressure (HT-LP) metamorphic overprint. The Alpujárride Complex is exhumed during this stage, while the crust ishigly stretched. This HT-LP metamorphic event ended with the thrusting of the Internal Zones of the Betic-RifCordillera onto the Iberian and African margins, around 20 Ma ago
APA, Harvard, Vancouver, ISO, and other styles
7

GALATI, ELENA. "Yeast response to prolonged activation of the spindle assembly checkpoint." Doctoral thesis, Università degli Studi di Milano-Bicocca, 2011. http://hdl.handle.net/10281/19557.

Full text
Abstract:
Faithful chromosome segregation during mitosis is fundamental for cell viability and genome stability. For a correct division, all kinetochores must be attached to the mitotic spindle and cohesion must be timely removed. Anaphase is triggered by the Anaphase Promoting Complex bound to its regulatory subunit Cdc20 (APC-Cdc20) that polyubiquitylates securin (Pds1 in budding yeast), whose role is to maintain inactive the protease separase (Esp1 in budding yeast) until anaphase onset. Once active, separase cleaves cohesin, thus triggering sister chromatid separation. Separase also promotes cyclinB proteolysis and mitotic exit due to its involvement in the Cdc14-early anaphase release (FEAR) pathway that promotes a partial activation of the Cdc14 phophatase, which is in turn key for CDK inactivation and mitotic exit. Cdc14 is maintained inactive throughout most of the cell cycle bound to its inhibitor Net1/Cfi1 and trapped in the nucleolus. At the beginning of anaphase Cdc14 is released from the nucleolus into the nucleus by the FEAR pathway; subsequently, Cdc14 is released also in the cytoplasm by the MEN (Mitotic Exit Network) pathway. In this way Cdc14 is fully active and can trigger mitotic exit by cyclinB-CDK inactivation. The Spindle Assembly Checkpoint (SAC) is a surveillance mechanism conserved in all eukaryotic organisms that ensures the correct segregation of the genetic material. In fact, it inhibits the metaphase to anaphase transition until all kinetochores are properly attached to the mitotic spindle by inactivating the APC-Cdc20 complex, thus providing the time for error correction. Cells do not arrest indefinitely upon SAC activation. After a variable period of time cells escape from the metaphase arrest also in the presence of a damaged mitotic spindle or faulty kinetochore attachments to spindle microtubules. This process is referred to as adaptation or mitotic slippage and is often involved in the resistance to chemotherapeutic compounds that target the mitotic spindle. In spite of its importance, the adaptation process is still little known. Within this context, the goals of my Ph.D. were: (1) to characterize the molecular mechanisms underlying SAC adaptation and (2) to search for factors involved in this process. For these purposes we used the yeast Saccharomyces cerevisiae as a model organism. (1) We characterized the adaptation process in either the presence or the absence of mitotic spindle perturbations. We depolymerized spindles by using two different drugs that alter microtubule dynamics, i.e. nocodazole and benomyl, whereas we induced SAC hyperactivation without spindle damage by overproducing Mad2 (GAL1-MAD2 cells), one of the key proteins for SAC signal generation and maintenance. We observed that in all the conditions cells are able to adapt, but with different kinetics. In particular, cells adapt faster in benomyl, while in nocodazole and with high levels of Mad2 cells need more time to slip out of mitosis. The few data available about SAC adaptation in higher eukaryotes indicate that SAC adaptation is accompanied by chromatid separation, a decrease in mitotic CDK activity and mitotic exit. Indeed, like in mammalian cells, yeast securin and cyclinB are degraded and sister chromatids are separated during adaptation. In addition, cyclinB stabilization, as well as Cdc20 and Cdc5 (polo kinase) inactivation, markedly delay adaptation, while the only yeast CKI (Sic1) is not involved in this process. Finally, when yeast cells adapt the SAC is likely to be turned off, as shown by the disassembly of the Mad1/Bub3 checkpoint complex. (2) To search for factors involved in SAC adaptation, we performed a genetic screen using GAL1-MAD2 cells. In particular, we screened for mutants that would remain arrested for prolonged times in mitosis upon MAD2 overexpression. We identified Rsc2, a non-essential component of the RSC chromatin remodelling complex, as a regulator of SAC adaptation in yeast. We demonstrated that RSCRsc2 is involved in fine tuning mitotic exit during the unperturbed cell cycle. Its activity becomes particularly important in conditions that would activate the SAC, as it contributes to cyclinB degradation. In the absence of Rsc2 Net1 phosphorylation and the early anaphase release of Cdc14 from the nucleolus are impaired, whereas expression of a dominant allele of CDC14 that loosens Net1 inhibition (CDC14TAB6-1) is sufficient to restore mitotic exit in conditions where Rsc2 becomes essential for this process. We further demonstrated that the ATPase activity of RSC is required for mitotic exit regulation, suggesting that its chromatin-remodelling activity is involved in this process. By studying possible genetic interactions between the RSC2 deletion and FEAR or MEN mutations, we found that RSC2 deletion confers synthetic lethality or sickness to MEN but not to FEAR mutants. Altogether, our data suggest that RSCRsc2 is a novel component of the FEAR pathway. Finally, we demonstrated that Rsc2 interacts in vivo and in vitro with the polo kinase Cdc5, which controls mitotic exit at different levels. Since RSC binds to acetylated histone tails, it is possible that histone transacetylases are also involved in SAC adaptation. We tested if the SAGA (Spt-Ada-Gcn5 Acetyltransferase) complex is involved in SAC adaptation by deleting ADA2 or GCN5 in yeast. Indeed, SAGA seems involved in adaptation, although the contribution of Ada2 and Gcn5 in the process differs depending on the conditions used to activate the SAC. Finally, since we found that upon treatment with benomyl (a microtubule destabilizer) cells adapt dividing nuclei, we wondered if SAC adaptation could be linked to the presence of cytoplasmic microtubules that are still partially detectable in these conditions. We therefore asked whether motor proteins and microtubule regulators are involved in mitotic slippage. Indeed, we found that in the absence of Kip2 and Bik1, which specifically bind to cytoplasmic microtubules, cells divide nuclei and exit mitosis slower than wild type cells, demonstrating that cytoplasmic microtubules and associated proteins could accelerate SAC adaptation. In conclusion, SAC adaptation is a very complex process whose timing probably depends on the interplay between different mechanisms. An important aim for a complete comprehension of this process, as well as for the development of new and more efficient cancer therapies, will be to identify novel factors implicated in adaptation and clarify how their function might be linked to one another.
APA, Harvard, Vancouver, ISO, and other styles
8

Bauer, Vladimír. "Finanční analýza společnosti Euro RSCG, a. s." Master's thesis, Vysoká škola ekonomická v Praze, 2006. http://www.nusl.cz/ntk/nusl-403.

Full text
Abstract:
Cílem práce je posoudit finanční zdraví společnosti Euro RSCG, a. s. s důrazem na charakteristiky reklamního odvětví. První část práce se věnuje popisu reklamního odvětví a blíže jsou popsány pojmy reklama, komunikační proces, subjekty reklamního trhu. Samotatná kapitola je věnována popisu reklamních médií a mediálním ukazatelům. V další část je zaměřená na společnost Euro RSCG, a. s. Další část obsahuje finanční analýzu vybrané společnosti.
APA, Harvard, Vancouver, ISO, and other styles
9

To, Davidnhan D. "Characterization of a novel peptide inhibitor of RsmC function." Kent State University Honors College / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ksuhonors1558543430558686.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bossonaro, Adriano Aleixo. "Método RSCT reengenharia de software orientada a componentes usando transformações." Universidade Federal de São Carlos, 2004. https://repositorio.ufscar.br/handle/ufscar/624.

Full text
Abstract:
Made available in DSpace on 2016-06-02T19:06:27Z (GMT). No. of bitstreams: 1 DissAAB.pdf: 2236709 bytes, checksum: 5e5fccf55f07efba73b03e599b8020e2 (MD5) Previous issue date: 2004-08-16
This project researched a Component-Oriented Software Reengineering Method using Transformations, named RSCT. The researched method extends the RST Method [Fon02a, Fon02b, Fon02c, Fon02d, Fon04], adding resources to treat the component-based reengineering. The RSCT aims to guide the components construction and reuse in the reengineering of legacy systems. The method is supported by two tools: a Software Transformation System, named Draco-PUC and a CASE tool, named MVCASE, and is divided in 4 (four) phases. In Phase 1, Construct Domains and Transformers, it is obtained the domains and transformers used in the legacy system reverse engineering to obtain of Object-Oriented Design. In Phase 2, Obtain Object-Oriented Design, it is obtained the legacy system object-oriented recovered design, using the domains and transformers constructed in Phase 1. In Phase 3, Construct Components, it is obtained the components of the legacy system domain, from the objectoriented recovered designs in Phase 2. With the MVCASE support, the Software Engineering analyses and refines each Object-Oriented design and uses design patterns to construct the components, making them available in a library. Finally, in Phase 4, Reconstruct Systems, the legacy systems are reconstructed from their object-oriented designs, obtained in Phase 2, reusing the components available in the library.
Este projeto pesquisou um Método de Reengenharia de Software Orientada a Componentes usando Transformações, denominado RSCT. O método pesquisado estende o Método RST [Fon02a, Fon02b, Fon02c, Fon02d, Fon04], adicionando recursos para tratar a reengenharia baseada em componentes. O RSCT tem como objetivo orientar a construção e reuso de componentes de software na reengenharia de sistemas legados. Na execução do método, o Engenheiro de Software é apoiado por duas ferramentas: o Sistema de Transformação Draco-PUC e a ferramenta CASE (Computer Aided Software Engineering) MVCASE, e está dividido em 04 (quatro) fases. Na Fase 1, Construir Domínios e Transformadores, obtêm-se os domínios e transformadores de software que são usados na Engenharia Reversa do sistema legado para a obtenção de seu Projeto Orientado a Objetos. Na Fase 2, Obter Projeto Orientado a Objetos, com o apoio do Sistema de Transformação Draco-PUC, obtém-se o projeto Orientado a Objetos recuperado do sistema legado, usando os domínios e transformadores construídos na Fase 1. Na Fase 3, Construir Componentes, obtêm-se os componentes do domínio do sistema legado, a partir dos projetos Orientados a Objetos recuperados na Fase 2. Com o apoio da ferramenta MVCASE, o Engenheiro de Software analisa e refina cada projeto Orientado a Objetos e utiliza padrões de projeto para construir os componentes, disponibilizando-os em uma biblioteca. Finalmente, na Fase 4, Reconstruir Sistemas, são reconstruídos os sistemas legados, a partir dos seus projetos Orientados a Objetos obtidos na Fase 2, fazendo reuso dos componentes disponíveis na biblioteca.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "RSCM"

1

Anderson, Mark J. RSM Simplified. Second edition. | Boca Raton : Taylor & Francis, 2016. | “A CRC: Productivity Press, 2016. http://dx.doi.org/10.1201/9781315382326.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gallery, RSC, and Royal Shakespeare Company, eds. RSC Gallery. Stratford upon Avon: Royal Shakespeare Theatre, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Vanderhaeghe, Stijn. RSC Anderlecht. Lichtervelde: Uitgeverij Kannibaal bvba, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Great Britain. Department of Health. and Great Britain. Central Office of Information., eds. Registered sick children's nurse (RSCN). [London]: [Department of Health], 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

(Firm), Ian Ritchie Architects, ed. RSC Courtyard Theatre. Herne Bay: Categorical Books, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Eoghan O Tuairisc-Na hu rsce altat. [s.l: The Author], 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

United States. National Aeronautics and Space Administration., ed. Evaluation of RSRM case hardware fretting concerns. Brigham City, UT: Thiokol Corp., Space Operations, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Shakespeare, William. The RSC Shakespeare: Complete works. Edited by Bate Jonathan, Rasmussen Eric 1960-, and Royal Shakespeare Company. Houndmills, Basingstoke, Hamsphire: Palgrave Macmillan, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Caroline, Richards Mary, and United States. National Aeronautics and Space Administration., eds. RSRM-4 (360T004): Final report : ballistics/mass properties. Brigham City, Utah: Morton Thiokol, Inc., Space Division, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

C, Richards M., Thiokol Corporation Space Operations, and George C. Marshall Space Flight Center., eds. RSRM-9 (360L009) final report: Ballistics mass properties. Brigham City, UT: Thiokol Corp., Space Operations, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "RSCM"

1

Tang, Guanjun, Yonghua Chen, Shiguang Xu, Qian Chen, and Wenchen He. "RSCM: A Reliability-Aware Service Chain Mapping." In Lecture Notes in Computer Science, 653–62. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-24265-7_56.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Buhmann, M. D., Prem Melville, Vikas Sindhwani, Novi Quadrianto, Wray L. Buntine, Luís Torgo, Xinhua Zhang, et al. "RSM." In Encyclopedia of Machine Learning, 875. Boston, MA: Springer US, 2011. http://dx.doi.org/10.1007/978-0-387-30164-8_737.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Donato, Dominique M., Steven K. Hanks, Kenneth A. Jacobson, M. P. Suresh Jayasekara, Zhan-Guo Gao, Francesca Deflorian, John Papaconstantinou, et al. "PBAF RSC." In Encyclopedia of Signaling Molecules, 1348. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4419-0461-4_101000.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fernández-Baizán, María C., Ernestina Menasalvas Ruiz, and Anita Wasilewska. "A Model of RSDM Implementation." In Rough Sets and Current Trends in Computing, 186–93. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998. http://dx.doi.org/10.1007/3-540-69115-4_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Holding, Peter. "Terry Hands, RSC, 1973." In Romeo and Juliet, 51–57. London: Macmillan Education UK, 1992. http://dx.doi.org/10.1007/978-1-349-11363-7_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ruby-Figueroa, René. "Response Surface Methodology (RSM)." In Encyclopedia of Membranes, 1729–30. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-44324-8_1998.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ruby-Figueroa, René. "Response Surface Methodology (RSM)." In Encyclopedia of Membranes, 1–3. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-40872-4_1998-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chakraborty, Dev P. "Predictions of the RSM." In Observer Performance Methods for Diagnostic Imaging, 353–400. Boca Raton, FL : CRC Press, Taylor & Francis Group, [2017] |: CRC Press, 2017. http://dx.doi.org/10.1201/9781351228190-17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rambe, Sarinah, Felicia Paramita, Endah Ayu Tri Wulandari, and Febrina Rahmayanti. "EXACERBATION OF ORAL LICHEN PLANUS: IS IT THE SIGN OF SYSTEMIC COMPLICATION?" In Emerging Trends in Oral Health Sciences and Dentistry. Technoarete Publishers, 2022. http://dx.doi.org/10.36647/etohsd/2022.01.b1.ch032.

Full text
Abstract:
Oral lichen planus (OLP) is a chronic inflammatory mucocutaneous disease with periods of remission and exacerbation. A 23-year-old male came to Oral Medicine clinic, Cipto Mangunkusumo General Hospital (RSCM) with complaint of painful sore mouth in the oral cavity. Previously in 2019 the patient was diagnosed with erosive oral lichen planus and was absent for follow-up for almost 2 years. The patient also had a history of hematologic disorder with indefinite diagnosis. Intra oral examination showed sloughing, erosion, atrophic and hyperkeratosis at several locations in oral mucosa. The diagnosis was OLP with the differential diagnosis being discoid or systemic lupus erythematosus and other bullous diseases. He was then prescribed corticosteroid swish and spit and an antioxidant supplement. The patient was referred to hematology-oncologist for hematologic pathology and diagnosed as suspected polycythemia, but definitive diagnosis cannot be obtained due to patient’s refusal for bone marrow puncture. The change of OLP type within 2 years and the presence of suspected polycythemia is a matter of concern. The exacerbation of OLP should alarm clinicians for the possibility of systemic involvement. Thus, deep exploration and multidisciplinary collaboration are critically needed in the management of OLP.
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Bo, and Colin Dewey. "RSEM." In Bioinformatics, 41–74. Apple Academic Press, 2014. http://dx.doi.org/10.1201/b16589-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "RSCM"

1

Joshi, Gopal, Animesh Rana, and R. Venkateshwar. "Robotic system for cleaning manholes (RSCM)." In 2011 IEEE Student Conference on Research and Development (SCOReD). IEEE, 2011. http://dx.doi.org/10.1109/scored.2011.6148716.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Stalin, S., and R. Christal Jebi. "Expression based image retrieval using RSCM." In 2016 International Conference on Circuit, Power and Computing Technologies (ICCPCT). IEEE, 2016. http://dx.doi.org/10.1109/iccpct.2016.7530145.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Anderson, Ryan B., Sean P. Long, Brian K. Horton, Amanda Z. Calle, and Emmanuel Soignard. "CARBONIFEROUS EXPANSION OF THE HERCYNIAN OROGENY ACROSS SOUTHERN BOLIVIA: INSIGHTS FROM RSCM THERMOMETRY AND THERMAL MODELING." In GSA Annual Meeting in Phoenix, Arizona, USA - 2019. Geological Society of America, 2019. http://dx.doi.org/10.1130/abs/2019am-338094.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lacroix, Brice J., Christine Ward, Abdeltif Lahfid, Nathan A. Niemi, Joel Spencer, and Pamela D. Kempton. "DYNAMICS OF THE POST-SUBDUCTION THERMAL ANOMALY OF THE NACIMIENTO BLOCK REVEALED BY RSCM AND (U-TH/HE) THERMOCHRONOLOGY." In 116th Annual GSA Cordilleran Section Meeting - 2020. Geological Society of America, 2020. http://dx.doi.org/10.1130/abs/2020cd-347351.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Howland, Colby, Matthew R. F. Manon, Jeffrey M. Rahl, and Allen J. McGrew. "HIGH THERMAL GRADIENT IN THE UPPER PLATE OF A CORE COMPLEX, DETERMINED BY CALCITE-DOLOMITE AND RSCM THERMOMETRY, PEQUOP MOUNTAINS, NV." In 51st Annual Northeastern GSA Section Meeting. Geological Society of America, 2016. http://dx.doi.org/10.1130/abs/2016ne-272907.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Starnes, Jesslyn K., Sean P. Long, Nadine McQuarrie, Kyle Larson, Tobgay Tobgay, and Emmanuel Soignard. "METAMORPHIC AND DEFORMATION TEMPERATURE TRENDS IN THE HIMALAYAN THRUST BELT IN EASTERNMOST BHUTAN: PRELIMINARY INSIGHTS FROM RSCM THERMOMETRY AND QUARTZ PETROFABRICS." In GSA Annual Meeting in Phoenix, Arizona, USA - 2019. Geological Society of America, 2019. http://dx.doi.org/10.1130/abs/2019am-338760.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Anggraeni, Tricia Dewi, Kevin Wijaya, and Patricia Selina. "Gynecological cancer recurrence in Indonesia’s National Referral Center: Doctor Cipto Mangunkusumo National Referral Hospital, Universitas Indonesia (RSCM-FKUI): an epidemiological study." In ASGO 2023. Korea: Korean Society of Gynecologic Oncology, 2024. http://dx.doi.org/10.3802/jgo.2024.35.s1.0017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Blackford, Nolan, Sean P. Long, Austin J. Stout, David W. Rodgers, Kimberly Megan Kramer, Russell V. Di Fiori, and Emmanuel Soignard. "UPPER-CRUSTAL THERMAL STRUCTURE OF THE SEVIER HINTERLAND PLATEAU, EASTERN NEVADA AND WESTERN UTAH: CONSTRAINTS FROM RSCM AND CAI THERMOMETRY INTEGRATED WITH STRUCTURAL RECONSTRUCTIONS." In GSA 2020 Connects Online. Geological Society of America, 2020. http://dx.doi.org/10.1130/abs/2020am-355044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Stout, Austin J., Sean P. Long, Sean P. Long, Emmanuel Soignard, and Emmanuel Soignard. "EXTENSIONAL STRAIN, CONTRACTIONAL STRAIN, AND PEAK THERMAL CONDITIONS IN THE WHITE PINE RANGE, EASTERN NEVADA: INSIGHTS FROM A STRUCTURAL RECONSTRUCTION INTEGRATED WITH RSCM THERMOMETRY." In GSA Annual Meeting in Seattle, Washington, USA - 2017. Geological Society of America, 2017. http://dx.doi.org/10.1130/abs/2017am-305633.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kramer, Kimberly Megan, Sean P. Long, Russell V. Di Fiori, and Emmanuel Soignard. "EVALUATING THE SPATIAL EXTENT OF ANOMALOUS UPPER-CRUSTAL HEATING IN THE NEVADAPLANO: INSIGHTS FROM RSCM THERMOMETRY IN THE FISH CREEK RANGE IN EAST-CENTRAL NEVADA." In GSA Annual Meeting in Phoenix, Arizona, USA - 2019. Geological Society of America, 2019. http://dx.doi.org/10.1130/abs/2019am-338446.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "RSCM"

1

Padget, C. D. W., D. R. M. Pattison, D. P. Moynihan, and O. Beyssac. Pyrite and pyrrhotite in a prograde metamorphic sequence, Hyland River region, SE Yukon: implications for orogenic gold. Natural Resources Canada/CMSS/Information Management, 2021. http://dx.doi.org/10.4095/328987.

Full text
Abstract:
The distribution of pyrite and pyrrhotite is documented within an andalusite-sillimanite type (high-temperature, low-pressure) metasedimentary succession exposed in the Hyland River region of southeastern Yukon, Canada. The following metamorphic zones are recognized: chlorite, biotite, cordierite/staurolite (porphyroblast-in), andalusite, sillimanite, and K-feldspar + sillimanite. Pyrite occurs in the chlorite zone through the biotite zone, while pyrrhotite occurs from the chlorite zone to K-feldspar + sillimanite zone. The pyrite-pyrrhotite transition, therefore, occupies an interval in the chlorite and lower biotite zones that is terminated upgrade by a pyrite-out isograd in the upper part of the biotite zone or lowest grade part of the cordierite/staurolite zone. Pressure and temperature conditions of the rocks were estimated from phase equilibrium modelling and from Raman spectroscopy of carbonaceous material (RSCM) thermometry. Modelling indicates pressures of 3.7-4.1 kbar with temperatures of ~425 °C at the biotite isograd, 560-570 °C for chlorite-out/porphyroblast-in, ~575 °C for andalusite-in, 575-600 °C for the sillimanite isograd, and 645-660 °C at the K-feldspar + sillimanite isograd. RSCM temperatures are greater than or equal to 420 °C in the Chl zone, 500 °C at the Bt isograd, 525-550 °C for porphyroblast-in isograd, ~550 °C at the And isograd, and 580 °C at the Sil isograd. These results suggest the pyrite-pyrrhotite transition occurs from less than or equal to 420°C to ~560 °C. Thermodynamic modelling shows 0.6 wt. % H2O is released during metamorphism over the ~140 °C interval of the pyrite-pyrrhotite transition. The gradual release of fluid in the biotite zone is interpreted to have broadened the pyrite-pyrrhotite transition compared to other studies that predict a small interval of vigorous fluid release associated with volumetric chlorite consumption. Samples from the pyrite-pyrrhotite transition zone contain lower whole rock and pyrite Au values than samples from unmetamorphosed/lower rocks, suggesting that Au was removed from the rock at conditions below the pyrite-pyrrhotite transition (&amp;lt;420 °C). The chlorite zone and higher-grade metamorphic rocks of the Hyland River area do not appear to be a plausible source region for orogenic gold.
APA, Harvard, Vancouver, ISO, and other styles
2

Argandoña, Antonio, and Sergio Marín García. Filantropía y RSC. Servicio de Publicaciones de la Universidad de Navarra, 2018. http://dx.doi.org/10.15581/018.st-487.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fontrodona, Joan, and Sergio Marín. Sostenibilidad y RSC. Servicio de Publicaciones de la Universidad de Navarra, May 2019. http://dx.doi.org/10.15581/018.st-514.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Snijders, J., T. Harrison, and B. Maddison. A Profile for RPKI Signed Checklists (RSCs). RFC Editor, November 2022. http://dx.doi.org/10.17487/rfc9323.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Thomas, T. R. Radioactive scrap metal (RSM) inventory & tracking system and prototype RSM field survey. Office of Scientific and Technical Information (OSTI), September 1994. http://dx.doi.org/10.2172/10186015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

DeSanti, C., H. K. Vivek, K. McCloghrie, and S. Gai. Fibre Channel Registered State Change Notification (RSCN) MIB. RFC Editor, August 2007. http://dx.doi.org/10.17487/rfc4983.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Семеріков, С. О., and А. М. Стрюк. Розробка плагінів для експорту з OJS до RSCI. ЧДТУ, May 2018. http://dx.doi.org/10.31812/0564/2244.

Full text
Abstract:
Формалізований облік продуктивності науковця за опублікованими результатами – важлива складова оцінки його діяльності, діяльності наукових підрозділів та установ – виконується за допомогою наукометричних баз даних. Головним джерелом відомостей про публікації є їх анотації та інші метадані, розміщувані на сайті наукового журналу під управлінням відповідної системи підтримки електронного документообігу, провідною з яких є Open Journal Systems (OJS). Ураховуючи, що стандартний метод експорту з OJS до наукометричної бази даних Russian Science Citation Index (RSCI) відсутній, була виконана розробка нового плагіну експорту із OJS 3 до системи підготовки випусків Articulus.
APA, Harvard, Vancouver, ISO, and other styles
8

Boyd, Paul M. Regional Sediment Management (RSM) Principles in Flood Recovery: Incorporating RSM after the 2011 Missouri River Flood. Fort Belvoir, VA: Defense Technical Information Center, June 2013. http://dx.doi.org/10.21236/ada582139.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chang, F. C., and M. Bottoni. Implementation and validation of a Reynolds stress model in the COMMIX-1C/RSM and CAPS-3D/RSM codes. Office of Scientific and Technical Information (OSTI), August 1995. http://dx.doi.org/10.2172/266682.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Smith, Thomas. Potential RSM projects; Utulei Beach region, American Samoa. Coastal and Hydraulics Laboratory (U.S.), March 2018. http://dx.doi.org/10.21079/11681/26601.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'RSCM' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography