Log in

Relevant bibliographies by topics / Round plate / Journal articles

To see the other types of publications on this topic, follow the link: Round plate.

Journal articles on the topic 'Round plate'

Author: Grafiati

Published: 30 May 2022

Last updated: 31 May 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Round plate.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Schoenwolf, G. C., and I. S. Alvarez. "Roles of neuroepithelial cell rearrangement and division in shaping of the avian neural plate." Development 106, no. 3 (July 1, 1989): 427–39. http://dx.doi.org/10.1242/dev.106.3.427.

Full text

Abstract:

Shaping of the neural plate, one of the most striking events of neurulation, involves rapid craniocaudal extension. In this study, we evaluated the roles of two processes in neural plate extension: neuroepithelial cell rearrangement and cell division. Quail epiblast plugs of constant size were grafted either just rostral to Hensen's node or paranodally and the resulting chimeras were examined at selected times postgrafting. By comparing the size of the original plug, the number of cells it contained and the distribution of cells within it to those same features of the grafts in chimeras, we were able to ascertain that, during transformation of the flat neural plate into the closed neural tube (a period requiring 24 h), the graft undergoes a maximum of 3 rounds of craniocaudal extension (each round of craniocaudal extension was defined as a doubling of graft length, so 3 rounds equaled an 8-fold increase in length). Such extension is accompanied by 2 rounds of cell rearrangement and 2–3 rounds of cell division (cell rearrangement occurred mediolaterally, so each round was defined as a halving of the number of cells in the width of the graft and a doubling of the number of cells in its length; each round of cell division was defined as a doubling of graft cell number). Modeling studies demonstrate that these amounts of cell rearrangement and division are sufficient to approximate the shaping of the neural plate that normally ensues during neurulation, provided that some of the cell division occurs within the longitudinal plane of the neural plate and some within its transverse plane: longitudinal cell division results in craniocaudal extension of the neural plate, whereas transverse cell division results in lateral expansion of the neural plate such as that occurring at its cranial end; cell rearrangement results in craniocaudal extension of the neural plate as well as in its narrowing. In conclusion, our results provide evidence that shaping of the neural plate involves mediolateral cell rearrangement and cell division, with the latter occurring within both the longitudinal and transverse planes of the neural plate.

APA, Harvard, Vancouver, ISO, and other styles

2

Liu, Chuang, Wen Liang Du, Ya Jing Quan, Kai Xing, and Heng Han. "Influence of Sieve Structural Parameters on Sieving of Shelled Buckwheat." Advanced Materials Research 915-916 (April 2014): 978–84. http://dx.doi.org/10.4028/www.scientific.net/amr.915-916.978.

Full text

Abstract:

The problems of high falsesieving rate and low productivity are encountered while sieving shelled buckwheat with traditional round plate sieve. This paper presents a design idea for improving the sieving effect by changing the plate structure. The improved designs consist of a round plate sieve with larger percentage of sieving area than the traditional round plate sieve and a triangular plate sieve with the approximately same geometry as shelled buckwheat grains. Tests are conducted to compare the sieving performance of traditional round plate sieve with the newly designed round plate sieve with different percentage of sieving areas and apertures. Also the traditional round plate sieve is compared with triangle plate sieve with different percentage of sieving areas and apertures. Compared to traditional round plate sieve, the falsesieving rate for newly designed round plate sieve with an aperture isφ4.4mm is reduced by 3.6.A round plate sieve with a percentage of sieving area of59.7%, aperture ofφ4.3mm, is used to sieve the shelled buckwheat of sizeφ4.6~4.7mm.A falsesieving rate of2.3, and non-sieving rate of17.4 are obtained and the sieving effect is found to be the best. For the triangle plate sieve a falsesieving rate of90.2 and non-sieving rate of92.1 are obtained. The triangle plate sieve is found unsuitable for the sieving of shelled buckwheat.

APA, Harvard, Vancouver, ISO, and other styles

3

XUE, JING, XIAOCHEN LI, LIZHI WANG, PANPAN XIAN, and HUIQING CHEN. "Bryochoerus liupanensis sp. nov. and Pseudechiniscus chengi. sp. nov. (Tardigrada: Heterotardigrada: Echiniscidae) from China." Zootaxa 4291, no. 2 (July 12, 2017): 324. http://dx.doi.org/10.11646/zootaxa.4291.2.5.

Full text

Abstract:

Two new species from China, Bryochoerus liupanensis sp. nov. and Pseudechiniscus chengi sp. nov. (Tardigrada: Heterotardigrada: Echiniscidae), are reported. Bryochoerus liupanensis sp. nov. is characterized by median plates 1 and 2 divided into four parts while median plate 3 is divided into three parts, and by two lateral plates on each side of all median plates. The new species differs from Bryochoerus intermedius in having a different cuticular sculpture and different lateral plates. Pseudechiniscus chengi sp. nov. is characterized by: head plate faceted, cephalic papilla dome-shaped, pseudosegmental plate with a longitudinal median fold, all plates including the dorsal plates and plates on legs with ornamentation composed of dense round dots, differing in size, and lacking striae between the dots. Pseudechiniscus chengi sp. nov. is most similar to Pseudechiniscus santomensis but differs by: lacking striae between the round dots on dorsal plates, lacking the tiny projections on the caudal margin of pseudosegmental plate, and the divided pseudosegmental plate.

APA, Harvard, Vancouver, ISO, and other styles

4

TURKOV, A. V., S. I. POLESHKO, E. A. FINADEEVA, and K. V. MARFIN. "THE RELATIONSHIP OF DEFLECTIONS AND FREQUENCIES OF NATURAL TRANSVERSE VIBRATIONS OF CIRCULAR ISOTROPIC PLATES OF VARIABLE THICKNESS ACCORDING TO THE LAW A SQUARE PARABOLA WITH A THICKENING TO THE CENTER." Building and reconstruction 99, no. 1 (2022): 59–66. http://dx.doi.org/10.33979/2073-7416-2022-99-1-59-66.

Full text

Abstract:

The relationship between the maximum deflections W0 from a static uniformly distributed load q and the fundamental frequency of natural transverse vibrations ω of a round isotropic plate of variable thickness according to the law of a square parabola with a thickening in the center under homogeneous conditions of support along the outer contour, depending on the ratio of the thickness of the plate in the center to the thickness along the edge, is considered.According to the results of the study, graphs of the dependence of the maximum deflection and the frequency of natural vibrations of the plate on the ratio t2/ t1 are constructed. It is shown that for round plates of linearly variable thickness at t2/t1≤1.1, the coefficient K with an accuracy of 5.29% coincides with the analytical coefficient for round plates of constant thickness.

APA, Harvard, Vancouver, ISO, and other styles

5

Li, Bin, Fan Xiao, and Sheng Nan Zhang. "Approach to the Ear Plate and Round Steel Connection." Advanced Materials Research 1025-1026 (September 2014): 74–79. http://dx.doi.org/10.4028/www.scientific.net/amr.1025-1026.74.

Full text

Abstract:

Basing on the ANSYS finite element analysis, the research takes a flat type tower crane boom on the ear plate and upper chord (round steel) of the connection as example. On the shape of the ear plate, welding form, round steel insert depth and the thickness of the ear plate concrete structure and parameter design are analyzed. Comparing the mechanical properties of bearing model, and then to discuss the ear plate and round steel joint stress concentration problem.

APA, Harvard, Vancouver, ISO, and other styles

6

Il’gamov, M. A., and V. E. Moiseeva. "Bending of a Round Plate under Gas Pressure." Mechanics of Solids 54, no. 4 (July 2019): 551–58. http://dx.doi.org/10.3103/s0025654419040083.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Shlyakhtin, D. A., ZH M. Dauletmuratova, and M. A. Kalmova. "Unsteady thermoelasticity problem for rigidly fixed round plate." IOP Conference Series: Materials Science and Engineering 775 (April 18, 2020): 012137. http://dx.doi.org/10.1088/1757-899x/775/1/012137.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Lewandowski, W. M., P. Kubski, and J. M. Khubeiz. "Natural convection heat transfer from round horizontal plate." Wärme- und Stoffübertragung 27, no. 5 (May 1992): 281–87. http://dx.doi.org/10.1007/bf01589965.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Cherepanov, Anatoliy. "FEATURES OF CALCULATING THE DEFLECTION OF ROUND PLATES." Modern Technologies and Scientific and Technological Progress 1, no. 1 (May 17, 2021): 211–12. http://dx.doi.org/10.36629/2686-9896-2021-1-1-211-212.

Full text

Abstract:

A method for calculating the deflection of a round flat steel plate bearing an ax isymmetric load is considered. For practical calculations, dimensionless coefficients of deflection in the center of the plate, deflection at a certain distance from the center of the plate, the stress coefficient and the accompanying function, which depends on the deflection of the plate and the pressure force on it, are used.

APA, Harvard, Vancouver, ISO, and other styles

10

Cherepanov, Anatoliy. "CALCULATION OF THE DEFLECTION OF A PINCHED ROUND PLATE." Modern Technologies and Scientific and Technological Progress 1, no. 1 (May 17, 2021): 209–10. http://dx.doi.org/10.36629/2686-9896-2021-1-1-209-210.

Full text

Abstract:

A method for calculating the deflection of a round flat steel plate pinched along the edge, bearing an axisymmetric load, is considered. For practical calculations, dimensionless coeffi cients of deflection in the center and in the area of fixing a round flat plate pinched along the edge are applied, the stress coefficient and the accompanying function, which depends on the deflection of the plate and the pressure force on it, are taken into account

APA, Harvard, Vancouver, ISO, and other styles

11

Caskey, G. W., S. D. Phillips, and B. R. Borchardt. "Results of the NIST national ball plate round robin." Journal of Research of the National Institute of Standards and Technology 102, no. 1 (January 1997): 85. http://dx.doi.org/10.6028/jres.102.008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Zakharov, Yu V., and K. G. Okhotkin. "Stability of a thin round plate in radial compression." Doklady Physics 46, no. 4 (April 2001): 286–90. http://dx.doi.org/10.1134/1.1371052.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Bokhoeva, L. A., and A. S. Chermoshentseva. "Accounting for shear deformations with bending a round plate." IOP Conference Series: Materials Science and Engineering 684 (November 25, 2019): 012024. http://dx.doi.org/10.1088/1757-899x/684/1/012024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Shlyakhin, Dmitry, Elena Savinova, and Vladimir Yurin. "Dynamic problem of thermoelectricity for round rigidly fixed plate." Вестник Инженерной школы ДВФУ 1, no. 50 (March 28, 2022): 3–16. http://dx.doi.org/10.24866/2227-6858/2022-1/3-16.

Full text

Abstract:

Построено новое замкнутое решение динамической осесимметричной задачи термоэлектроупругости для круглой жестко закрепленной пьезокерамической пластины в случае действия на ее лицевых поверхностях температурной нагрузки (граничные условия 1-го рода). На основании гиперболической теории теплопроводности Лорда–Шульмана определяется температурное поле в конструкции с последующим исследованием связанной задачи электроупругости. Расчетные соотношения, полученные при использовании метода неполного разделения переменных в виде конечных интегральных преобразований, позволяют определить температуру и напряженно-деформированное состояние пластины в случае действия нестационарной нагрузки. Проанализирована особенность использования гиперболической теории теплопроводности в пьезокерамических пластинах, показана необходимость учета инерционных свойств упругой системы различной толщины.

APA, Harvard, Vancouver, ISO, and other styles

15

TURKOV, A. V., S. I. POLESHKO, E. A. FINADEEVA, and K. V. MARFIN. "RELATIONSHIP OF MAXIMUM DEFLECTIONS AND NATURAL FREQUENCIES VIBRATIONS OF ISOTROPIC CIRCULAR PLATES WITH INHOMOGENEOUS RESISTANCE CONDITIONS ON THE OUTER AND INNER CONTOUR." Building and reconstruction 98, no. 6 (2021): 36–42. http://dx.doi.org/10.33979/2073-7416-2021-98-6-36-42.

Full text

Abstract:

The relationship between the maximum deflections from a static uniformly distributed load W0 and the fundamental frequency of natural transverse vibrations of a round isotropic plate of linearly variable thickness with thickening to the edge under homogeneous conditions of support along the outer contour, depending on the ratio of the thickness of the plate in the center to the thickness along the edge, is considered. According to the results of the study, graphs of the dependence of the maximum deflection and the frequency of natural vibrations of the plate on the ratio t1 / t2 are constructed. It is shown that for round plates of linearly variable thickness at t1/t2<1.1 coefficient K with an accuracy of 5.9% coincides with the analytical coefficient for round plates of constant thickness. Numerical studies shows that when the ratio of the thicknesses on the contour and in the center is equal to two, the difference in the coefficient K, which depends on the relationship between the static and dynamic characteristics of the platinum, is about 25% for hinged support along the contour and up to 37% for rigid support. This indicates a more significant effect of uneven mass distribution for such boundary conditions.

APA, Harvard, Vancouver, ISO, and other styles

16

Ma, Ke Jian, Y. Q. Lu, J. C. Xiao, and H. G. Zhang. "Theory and Practice of New Types of Long-Span Building Structures Developed at Guizhou University." Key Engineering Materials 400-402 (October 2008): 17–25. http://dx.doi.org/10.4028/www.scientific.net/kem.400-402.17.

Full text

Abstract:

This paper presents the theory and practice of new types of long-span building structures developed at Guizhou University for the recent 25 years. The new structural systems include RC open-web sandwich plate structures, steel/RC composite open-web sandwich plate structures, prestressed RC open-web sandwich plate structures, and cast-in-place concrete round eye hollow plate structures. The mechanical characters and technical indexes of each system are described. The application of the structures is detailed in tables and photos.

APA, Harvard, Vancouver, ISO, and other styles

17

Mi, J., P. Kalt, and G. J. Nathan. "PIV Measurements of a Turbulent Jet Issuing from a Round Orifice Plate(Free and Confined Jet)." Proceedings of the International Conference on Jets, Wakes and Separated Flows (ICJWSF) 2005 (2005): 293–98. http://dx.doi.org/10.1299/jsmeicjwsf.2005.293.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Munir, Moh M., Mukhlis Mukhlis, Imam Khoirul R, Hendri B, M. Syaiful A, Erdiyansyah A, and Andi Ari W. "EFFECT OF WELDING SEQUENCE ON MULTI PASS TEMPER BEAD WELDING JOINT OF PT .INKA BOGIE LRT ON DISTORCTION, MICRO STRUCTURE AND HARDNESS." JURNAL INTEGRASI 11, no. 2 (October 17, 2019): 103–11. http://dx.doi.org/10.30871/ji.v11i2.1662.

Full text

Abstract:

Bogie kereta api merupakan salah satu bagian yang sangat penting, karena bogie menahan beban yang ada pada suatu gerbong kereta api. Karena sifatnya yang sangat penting maka bogie kereta api harus memiliki sifat dan kekuatan yang baik. Bogie hasil proses fabrikasi dengan pengelasan, memerlukan proses annealing untuk mereduksi tegangan sisa yang terjadi. Proses annealing atau Post Weld Heat Treatment tersebut membutuhkan furnace yang besar, energi listrik yang besar, dan tentunya biaya jadi lebih mahal. Pada penelitian ini, dilakukan alternative proses pengelasan dengan teknik Temper bead welding, pada sambungan frame bogie plate to plate dan plate to round bar. Selain itu juga melakukan proses Post Weld Heat Treatment pada sambungan plate to plte, dan sequence of welding pada sambungan plate to round bar. Hasil penelitian menunjukkan, bahwa proses Temper bead welding yang dilakukan terhadap proses fabrikasi joint bogie LRT plate to plate dan joint plate to round bar, dapat menurunkan nilai kekerasan, namun belum menunjukkan perbedaan yang signifikan. Sedangkan proses Temper bead welding dapat menghasilkan distorsi yang paling kecil pada bogie LRT. Hasil pengukuran distrosi menujukan pengelasan sequence B menghasilkan distorsi paling besar, sedangkan variasi distorsi terkecil adalah varisi sequence C dengan temper bead welding.

APA, Harvard, Vancouver, ISO, and other styles

19

Wang, Ke Sheng. "Structure Design of pin Round Punch for Stamping Stainless Steel Sheets." Applied Mechanics and Materials 44-47 (December 2010): 2769–73. http://dx.doi.org/10.4028/www.scientific.net/amm.44-47.2769.

Full text

Abstract:

To solve the fracture problem of pin round punch when stamping small holes on stainless steel sheets, the retaining structure was analyzed and the structure optimization design of pin round punch was presented. It is shown that during stamping stainless steel sheets, it can prevent pin punch from being fractured effectively by adopting clearance fit between pin punch and retainer plate, precise guide of stripper plate and making working part free in the stripper plate .The optimization results show that the B-type round punch is better than A-type in resisting fracture, and the resistance fracture capability of pin round punch is the best when the transition radius between guiding part and working part is R10mm. Aimed at pin punch damaged in biggish progressive dies, the quick replaced structure is designed, which can replace the pin punch in 3 minutes. So this type of structure can save time very much.

APA, Harvard, Vancouver, ISO, and other styles

20

Fan, Zhechao, and Jun Sun. "Numerical Optimization Design of Anchoring End of Prestressed Cable at Some Hydropower Station." Open Civil Engineering Journal 10, no. 1 (May 25, 2016): 246–50. http://dx.doi.org/10.2174/1874149501610010246.

Full text

Abstract:

The paper discusses the numerical optimization design of anchoring end of prestressed cable at some hydropower station. There are two types of designing for the anchoring end, namely using square thick steel anchor bearing plate or using the round-tower anchor bearing plate. By the numerical calculation, the anchoring end using the round-tower anchor bearing plate can match the space and mechanical characteristics of the anchoring end, and stress of the anchoring end is more reasonable.

APA, Harvard, Vancouver, ISO, and other styles

21

Shlyakhin, D. A. "THE COMPELLED AXISYMMETRIC BENDING FLUCTUATIONS OF THICK ROUND RIGID PLATE." Vestnik of Samara University. Natural Science Series 17, no. 8 (June 14, 2017): 142–52. http://dx.doi.org/10.18287/2541-7525-2011-17-8-142-152.

Full text

Abstract:

The new closed solution of axially symmetric nonstationary problem of the theory of elasticity for thick round anisotropic plate with rigid of its external radial surface is constructed. Calculated relations are obtained by method of expansion in eigen vector-functions in the form of structural algorithm of finite transformations. Numerical results allow to define the natural-vibration frequency, and also the stress-strain state of the testing element.

APA, Harvard, Vancouver, ISO, and other styles

22

Shlyakhin, D. A. "COMPELLED AXYSIMMETRIC FLEXURAL FLUCTUATIONS OF THICK ROUND RIGID PIEZOCERAMIC PLATE." Vestnik of Samara University. Natural Science Series 18, no. 6 (June 9, 2017): 124–35. http://dx.doi.org/10.18287/2541-7525-2012-18-6-124-135.

Full text

Abstract:

New closed solution of axisymmetric nonstationary problem of the theory of electroelasticity for thick round piezoceramic plate with rigid of its external radial surface is constructed. Calculated relations are obtained by method of expansion in eigen vector functions in the form of structural algorithm of ﬁnite transformations. Numerical results allow to deﬁne the natural-vibration frequency, the stress-strain state of the testing element, and also the potential and intensity of the induced electric ﬁeld.

APA, Harvard, Vancouver, ISO, and other styles

23

Breslavsky, Dmytro Vasylovych, Alyona Volodymyrivna Senko, and Oksana Andriivna Tatarinova. "Modeling the creep fracture processes in plate with round hole." Bulletin of the National Technical University «KhPI» Series: Dynamics and Strength of Machines, no. 1 (August 17, 2020): 7–12. http://dx.doi.org/10.20998/2078-9130.2020.1.217449.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Patsyuk, V. I., and V. K. Rimskii. "Instantaneous formation of a round hole in a stretched plate." Soviet Applied Mechanics 27, no. 11 (November 1991): 1117–23. http://dx.doi.org/10.1007/bf00887870.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Motovilovets, I. A. "On the thermomechanical behavior of a round flexible orthotropic plate." International Applied Mechanics 35, no. 4 (April 1999): 413–19. http://dx.doi.org/10.1007/bf02682226.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Cherepanov, Anatoliy. "FEATURES OF CALCULATION OF VIBRATIONS OF A PINCHED ROUND PLATE." Modern Technologies and Scientific and Technological Progress 1, no. 1 (May 17, 2021): 207–8. http://dx.doi.org/10.36629/2686-9896-2021-1-1-207-208.

Full text

Abstract:

A method for calculating the vibrations of a circular steel plate, clamped around the circumference and loaded with a short-term load, with the determination of the frequency of the fun damental tone (the lowest type of vibration), is considered. For practical calculations, the influence of the mass of the plate itself, as well as the mass of air or liquid, on the frequency of natural oscillations is taken into account.

APA, Harvard, Vancouver, ISO, and other styles

27

Wang, Naiguang, Yangchang Mu, Qi Li, and Zhicong Shi. "Discharge and corrosion behaviour of AP65 magnesium anode plates with different rolling reductions." RSC Advances 7, no. 84 (2017): 53226–35. http://dx.doi.org/10.1039/c7ra10652a.

Full text

Abstract:

Surfaces of AP65 plates discharged at 180 mA cm⁻² for 5 s after removing the oxidation products. The round pits on the 63% rolled plate indicate the active dissolution while the angular pits on other samples reveal the spalling of metallic pieces.

APA, Harvard, Vancouver, ISO, and other styles

28

Wałęsa, Krzysztof, Ireneusz Malujda, and Krzysztof Talaśka. "Experimental research of round welded drive belts." Mechanik 91, no. 5-6 (May 28, 2018): 443–46. http://dx.doi.org/10.17814/mechanik.2018.5-6.56.

Full text

Abstract:

Presented are the requirements and preliminary research assumptions for round welded elastomer belts. The strength examination problems of polyurethane belts and welds were noticed. Their results are necessary for further analysis of hot plate welding process.

APA, Harvard, Vancouver, ISO, and other styles

29

KENNEDY, JAMES E., SALLY K. WILLIAMS, TED BROWN, and PHIL MINERICH. "Prevalence of Escherichia coli O157:H7 and Indicator Organisms on the Surface of Intact Subprimal Beef Cuts Prior to Further Processing." Journal of Food Protection 69, no. 7 (July 1, 2006): 1514–17. http://dx.doi.org/10.4315/0362-028x-69.7.1514.

Full text

Abstract:

The objective of this study was to determine the prevalence of Escherichia coli O157:H7, other E. coli strains, total coliforms, and aerobic organisms on the surface of subprimal beef cuts prior to enhancement. Subprimal cuts were sampled during winter (January and February 2004) and summer (August through October 2004). During each collection period, six representative subprimal cuts (chuck tenders, 0.64-cm trimmed strips, bottom round flat, rough-trimmed brisket, cap-on top rounds, and cap-off insides) were sampled. A total of 600 samples in winter (100 samples per cut) and 599 samples in summer (100 chuck tenders, 100 0.64-cm trimmed strips, 100 bottom round flats, 100 cap-off insides, 97 rough-trimmed briskets, and 102 cap-on top rounds) were collected from five plants in the Midwest, southern Midwest, northern Midwest, and Southeast and swabbed using the sponge swab method. All sponges were analyzed for E. coli O157:H7. In addition, 400 subprimal cuts from four plants were analyzed for aerobic plate counts, total coliforms, and other E. coli strains during each collection period. E. coli O157:H7 was not detected on any of the 1,199 subprimal samples; thus, incidence of E. coli O157:H7 was <0.083%. Seasonal differences between aerobic plate counts and total coliform counts for each of the same cuts were 1.0 log CFU per cut or less. E. coli strains were not detected in 82, 52, 69, and 82% of the chuck tenders, 0.64-cm trimmed strips, bottom round flats, and cap-off insides, respectively.

APA, Harvard, Vancouver, ISO, and other styles

30

Hui, C. Y., and A. Ruina. "Eddy Current Flow Near Cracks in Thin Plates." Journal of Applied Mechanics 52, no. 4 (December 1, 1985): 841–46. http://dx.doi.org/10.1115/1.3169156.

Full text

Abstract:

The problem of magnetically induced eddy current flow in a thin cracked plate is posed and solved for a few special cases. The current density is singular at the tip of a nonconducting crack. The strength of this singularity, denoted M, is found by reducing the eddy current problem to a conduction problem and then using the mathematical methods of fracture mechanics. M is found for a small crack in a current field, a small crack in a round plate with spatially uniform magnetic field, and a half-cracked round plate with spacially uniform magnetic field.

APA, Harvard, Vancouver, ISO, and other styles

31

Renthal, Nora Edwards, Priyanka Nakka, John Baronas, Henry M. Kronenberg, and Joel N. Hirschhorn. "Specificity for the Epiphyseal Round Cell Layer is Significantly Associated With Height GWAS." Journal of the Endocrine Society 5, Supplement_1 (May 1, 2021): A685. http://dx.doi.org/10.1210/jendso/bvab048.1396.

Full text

Abstract:

Abstract Human height is a model polygenic trait with thousands of height-related SNPs identified in GWAS to date. An important determinant of height is the proliferation and hypertrophy of growth plate chondrocytes during childhood long bone elongation. Connecting the expression of specific genes that affect skeletal biology to associated variants in GWAS remains a difficult challenge. To connect the genetics of height and growth plate gene expression, we studied the relationship between gene expression in the murine growth plate and common-variant associations from GWAS of height. To obtain gene expression data from the growth plate, we dissected three layers of murine tibial growth plates, extracted RNA from each layer, and measured expression using the Affymetrix GeneChip 430 3.0. For each gene, we derived a specificity score for each growth plate layer, and SNP-level p-values from a published GWAS of height (N~700000) were combined into gene-level p-values using MAGMA. We then used MAGMA to test for association between specificity of expression for each growth plate layer and the GWAS gene level p-values for height. We found that specificity for the round cell layer is significantly associated with height GWAS p-values (p = 8.5x10-9). This association remains when we condition on each of the other cell layers and on membership in a set of genes from OMIM that cause skeletal growth disorders (3.3x10-8 < p < 4.1x10-6). We replicated this result in a RNA-seq dataset of maturing chondrocytes sampled at three time points during development in vitro (days 3, 5, and 10): we found that z-scores for expression in the earliest two days of development are significantly associated with gene-level p-values from height GWAS (pDay3 = 1.2x10-21 and pDay5 = 2.0x10-20) and that this association remains after conditioning on the other timepoints and on the OMIM gene set (3.1x10-20 < pDay3 < 8.3x10-5; 3.7x10-19 < pDay5 < 0.002). We then performed pathway analysis of genes that are both highly specific to the round layer and highly significant in GWAS using Enrichr. Together, our results suggest that genes expressed in early chondrocyte development (the round cell layer) are particularly relevant to the contribution of growth plate-expressed genes to height. This conclusion both sheds light on the regulation of human skeletal growth and also helps prioritize relevant genes implicated from the height GWAS in skeletal biology.

APA, Harvard, Vancouver, ISO, and other styles

32

Zhao, Xiao. "Very Long Life Fatigue Behavior of Q345 Bridge Steel." Applied Mechanics and Materials 217-219 (November 2012): 407–10. http://dx.doi.org/10.4028/www.scientific.net/amm.217-219.407.

Full text

Abstract:

Using the ultrasonic fatigue testing technique, specimens of Q345 bridge steel with two types of shape (round and plate) were performed in ambient air at room temperature with a stress ratio of R=-1. The very long life fatigue property of Q345 was studied and the initiation mechanisms of fatigue cracks were investigated and analyzed with SEM. The results show that the two types of specimen present different S-N curve characteristics in the region of 105-109 cycles. The S-N curve of round specimens shows continuously decreasing tendency, while the S-N curve of plate specimens has a steep decreasing step and an asymptotic horizontal one. The fatigue strength of round specimen is higher than that of plate specimen. Fatigue failure initiates from the surface before 107cycles with high stess level while at internal inclusion in the very long life fatigue regime.

APA, Harvard, Vancouver, ISO, and other styles

33

Xing, He, Yizhong Wang, and Chun Hu. "Characterization and Evaluation of a Novel Exalting Round-Plate Photocatalytic Reactor." Water Environment Research 73, no. 6 (November 2001): 655–60. http://dx.doi.org/10.2175/106143001x143385.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Seo, Eung Soo, Yongsik Kim, Joong Kook Hwang, Young Suck Chai, and Jaesool Shim. "Performance Improvement of Hot-Air Dryer Through Optimum Round-Hole Plate." Transactions of the Korean Society of Mechanical Engineers A 39, no. 9 (September 1, 2015): 947–54. http://dx.doi.org/10.3795/ksme-a.2015.39.9.947.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Abu Madi, M., R. A. Johns, and M. R. Heikal. "Performance characteristics correlation for round tube and plate finned heat exchangers." International Journal of Refrigeration 21, no. 7 (November 1998): 507–17. http://dx.doi.org/10.1016/s0140-7007(98)00031-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Andreev, V. I., A. S. Chepurnenko, and B. M. Yazyev. "Axisymmetric bending of a round elastic plate in case of creep." Vestnik MGSU, no. 5 (May 2014): 16–24. http://dx.doi.org/10.22227/1997-0935.2014.5.16-24.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Kalifa, Rim Ben, Sabra Habli, Nejla Mahjoub Saïd, Hervé Bournot, and Georges Le Palec. "Parametric analysis of a round jet impingement on a heated plate." International Journal of Heat and Fluid Flow 57 (February 2016): 11–23. http://dx.doi.org/10.1016/j.ijheatfluidflow.2015.11.005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Sophitanontrat, W., and K. Khajarern. "Different serving shapes of cooked jasmine rice on a plate affect the consumer's visual preference." Food Research 5, no. 6 (November 28, 2021): 104–8. http://dx.doi.org/10.26656/fr.2017.5(6).366.

Full text

Abstract:

This research aimed to investigate how five different serving shapes of cooked jasmine rice (round, square, triangular, flower, and heart shapes) affected visual hedonic preference and consumer perception (n = 100). Cooked rice was placed on a plate without food, the heart, flower, and triangle serving shapes had higher artistic mean scores than the round shape. And cooked rice placed in the shape of a heart on a plate with food had a higher mean score on ‘liking in shape’ than round or square shapes. The findings of this study could be beneficial to food styling, presenting, and catering in the foodservice industry, resulting in increased sales, particularly in restaurants and hotels. Furthermore, for more successful food marketing and advertising, one can use the shapes of a heart as a serving shape for cooked jasmine rice box labels.

APA, Harvard, Vancouver, ISO, and other styles

39

Cherkes, M. B. "Relationship between maxillary sinuses’ shapes and their contacts with upper jaw teeth roots according to computer tomography." Український радіологічний та онкологічний журнал 29, no. 3 (September 20, 2021): 31–50. http://dx.doi.org/10.46879/ukroj.3.2021.31-50.

Full text

Abstract:

Background. Rhinosinusitis, affecting both maxillary and other sinuses, is a multidisciplinary issue which otolaryngologists, dentists, neurologists and ophthalmologists are constantly dealing with. There is a remarkable diagnostic value of anthropometric indicators of maxillary sinuses of people of different genders, using CT scan images of mature age patients. Purpose – establish a relationship between the shape of the maxillary sinuses and possible contacts of the tooth roots of the maxillary dental arch in healthy mature men and women. Materials and methods. The study was performed based on the results of 102 CBCT with normal maxillary sinuses variations in adults in the frontal and sagittal plane. The examinations were performed on Point 3D Combi 500 cone-beam tomograph. The paper belongs to the «description of case series» category whis is a type of study recognized by evidence based medicine and does not claim statistical significance of the results. Results and discussion. When examining the computer tomograms of men and women in the study group, it has been found out how the shape of the maxillary sinuses (MS) affects the contact of the tooth roots with the cortical plate and the mucous membrane of the maxillary sinuses. Six main shapes of the MS are defined: trapezoidal, square, round, oval, rectangular and triangular. In the frontal plane of CBCT, the most frequent contact with the MS cortical plate is observed in the triangular and rectangular shape of the MS, that is: in the MS rectangular shape it is in contact with the 15th, 25th tooth root in 13 people (56.5% of cases) and in the triangular shape – with the 15th, 25th tooth root in 17 people (56.5% of cases). Analyzing CBCT in the sagittal plane, the most frequent contact with the cortical plate of the left MS is observed in the MS triangular shape, namely – the sinus is in contact with the 25th tooth root in 38 people (59.4% of cases). In the sagittal plane of CBCT, the contact with the tooth roots was rarely observed in the MS square and round shape. In the MS square shape, the 13th and 14th tooth roots do not come into contact with its cortical plate, and, with the mucous membrane, there is no contact of all the roots of the teeth except the 16th, in 1 person only. Conclusions. The results of the study have made it possible to trace a number of patterns of influence of the maxillary sinus shape on the tooth roots contacting it. The contact of the MS cortical plate is most often observed with 16th and 26th tooth roots, while the MS mucous membrane – with 17th and 27th tooth roots of the upper jaw. It was found that in any shape of sinus in the frontal plane, no contact of the 13th, 23rd and 24th tooth roots of the maxillary dental arch with the mucous membrane of the maxillary sinus was detected. In the CBCT frontal plane, it has been found that the most frequent contact with the MS cortical plate is observed in triangular, trapezoidal and rectangular form of the MS, and the rarest one – in oval, square and round form of MS. The study has established that in the sagittal plane of CBCT the most frequent contact with the MS cortical plate is observed in the MS triangular shape, and the rarest – in the round one.

APA, Harvard, Vancouver, ISO, and other styles

40

Wałęsa, Krzysztof, Ireneusz Malujda, Krzysztof Talaśka, and Dominik Wilczyński. "Process Analysis of the Hot Plate Welding of Drive Belts." Acta Mechanica et Automatica 14, no. 2 (June 1, 2020): 84–90. http://dx.doi.org/10.2478/ama-2020-0012.

Full text

Abstract:

AbstractMost industrial machines use belt transmission for power transfer. These mechanisms often use the round belts of several millimetres in diameter that are made of thermoplastic elastomers, especially polyurethane. Their production process calls for bonding the material, which is often performed by hot plate butt welding. In order to achieve proper design of an automatic welding machine, the authors analysed the hot plate welding process of round belts. This process consists of five phases. It is necessary to recognize all the physical phenomena that occur during welding, especially those connected with thermomechanical properties of material. This knowledge is necessary to determine the temperature distribution during each step of the process. The paper presents a standard welding cycle together with an explanation of the physical phenomena in each phase. An analysis of these fundamentals will be used to derivate the function of temperature distribution during all process phases. In addition, some assumptions for calculation of temperature distribution and some fundamental physic correlations were presented.

APA, Harvard, Vancouver, ISO, and other styles

41

Woods, Andy T., Charles Michel, and Charles Spence. "Odd versus even: a scientific study of the ‘rules’ of plating." PeerJ 4 (January 4, 2016): e1526. http://dx.doi.org/10.7717/peerj.1526.

Full text

Abstract:

We report on the results of a series of large-scale computer-based preference tests (conducted at The Science Museum in London and online) that evaluated the widely-held belief that food should be plated in odd rather than even numbers of elements in order to maximize the visual appeal of a dish. Participants were presented with pairs of plates of food showing odd versus even number of seared scallops (3 vs. 4; 1–6 in Experiment 7), arranged in a line, as a polygon or randomly, on either a round or square white plate. No consistent evidence for a preference for odd or even numbers of food items was found, thus questioning the oft-made assertion that odd number of items on a plate looks better than an even number. The implications of these results are discussed.

APA, Harvard, Vancouver, ISO, and other styles

42

Osadebe, NN, CM Attama, and OA Oguaghamba. "DYNAMICS OF RECTANGULAR ORTHOTROPIC PLATES USING CHARACTERISTIC ORTHOGONAL POLYNOMIAL – GALERKIN’S METHODS." Nigerian Journal of Technology 36, no. 1 (December 28, 2016): 50–56. http://dx.doi.org/10.4314/njt.v36i1.8.

Full text

Abstract:

The assumed deflection shapes used in the approximate methods such as in the Galerkin’s method were normally formulated by inspection and sometimes by trial and error, until recently, when a systematic method of constructing such a function in the form of Characteristic Orthogonal Polynomial (COPs) was developed by Bhat in 1985. In the vibrational analyses of orthotropic rectangular plates with different boundary conditions, the study used the characteristic orthogonal polynomial theory to obtain satisfactory approximate shape functions for these plates. These functions were applied to Galerkin indirect varational method to obtain new set of fundamental natural frequencies for these plates. The results were reasonable when compared with those in the previous work. All round simply supported thin rectangular plate (SSSS), rectangular clamped plated (CCCC) and rectangular plate with one edge clamped and all others edges simply supported (CSSS) gave 5.172, 9.429 and 6.202 natural frequencies in rad /sec respectively at 0.05%, 0.0% and 22.93% difference with the previous[3] results5.170rad/sec, 9.429rad/sec and 8.048rad/sec for SSSS, CCCC and CSSS. For others like: rectangular plate with one edge simply supported and all other edges clamped (CCSC), rectangular plate simply supported at two opposite sides and clamped at the others (CSCS) and rectangular plate clamped at two adjacent sides and simply supported at the others (CCSS) with no available results, their natural frequencies obtained are 8.041rad/sec, 6.272rad/sec and 7.106rad/sec respectively. http://dx.doi.org/10.4314/njt.v36i1.8

APA, Harvard, Vancouver, ISO, and other styles

43

Wu, Yingwei, Guanghui Su, Suizheng Qiu, and Ken-ichiro Sugiyama. "ICONE15-10388 NUMERICAL SIMULATION OF NATURAL CONVECTION HEAT TRANSFER FROM A DOWNWARD-FACING HORIZONTAL ROUND PLATE IN CONFINED SPACE." Proceedings of the International Conference on Nuclear Engineering (ICONE) 2007.15 (2007): _ICONE1510. http://dx.doi.org/10.1299/jsmeicone.2007.15._icone1510_198.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Shlyakhin, D. A., and Zh M. Dauletmuratova. "Non-stationary coupled axisymmetric thermoelasticity problem for a rigidly fixed round plate." PNRPU Mechanics Bulletin, no. 4 (December 15, 2019): 191–200. http://dx.doi.org/10.15593/perm.mech/2019.4.18.

Full text

Abstract:

A new closed solution is constructed for the axisymmetric dynamic problem of the classical (CTE) theory of thermoelasticity for a rigidly fixed circular isotropic plate in the case of a temperature change on its face surfaces (boundary conditions of the first kind). The mathematical formulation of the problem under consideration includes linear equations of thermal conductivity and equilibrium in a spatial setting, assuming that their inertial elastic characteristics can be neglected in the structures under study. In constructing a general solution of related non-self-conjugate equations, we use the mathematical apparatus of separation of variables in the form of finite integral transformations i.e. Hankel along the radial coordinate and biorthogonal transformation (FIT) with respect to the axial variable. At each stage of the investigation, a procedure is performed to reduce the boundary conditions to a form that allows the corresponding transformation to be applied. A particular feature of this solution is the application of a FIT based on a multicomponent relation of the eigenvector functions of two homogeneous boundary value problems. An important point in the procedure of the structural algorithm is the separation of the adjoint operator, without which it is impossible to solve non-self-adjoint linear problems of mathematical physics. This transformation is the most effective method for studying similar boundary value problems. The calculated design relationships make it possible to determine the stress-strain state and the character of the distribution of the temperature field in a rigidly fixed circular isotropic plate for an arbitrary external temperature effect with respect to time. Numerical analysis of the strength characteristics of the concrete structure shows that during the period of the unsteady load the maximum values of mechanical stresses are observed. Later, at a constant temperature regime, as a result of heating the entire plate, the displacements increase and the stresses fall.

APA, Harvard, Vancouver, ISO, and other styles

45

Gojon, Romain, and Christophe Bogey. "Flow Features near Plate Impinged by Ideally Expanded and Underexpanded Round Jets." AIAA Journal 56, no. 2 (February 2018): 445–57. http://dx.doi.org/10.2514/1.j056421.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Ivanov, E. Yu. "Calculation of displacements in a viscoelastic square plate with a round cut." VESTNIK of the Samara State Aerospace University 14, no. 2 (October 6, 2015): 88. http://dx.doi.org/10.18287/2412-7329-2015-14-2-88-92.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

SHAKOUCHI, Toshihiko, Tsuyoshi TANABE, Koichi TSUJIMOTO, Toshitake ANDO, and Syuji SASAZAKI. "Interaction between Two Round Jets Impinging on Flat Plate with Small Spacing." Proceedings of the JSME annual meeting 2003.2 (2003): 113–14. http://dx.doi.org/10.1299/jsmemecjo.2003.2.0_113.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Okada, Kenji, and Tatsuo Sakai. "Fatigue Life Distributions of Round Bar and Plate Specimens Having Many Defects." Transactions of the Japan Society of Mechanical Engineers Series A 60, no. 580 (1994): 2683–89. http://dx.doi.org/10.1299/kikaia.60.2683.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Ivina, N. F. "Correcting natural oscillations of a round piezoceramic plate by changing its shape." Russian Journal of Nondestructive Testing 36, no. 11 (November 2000): 839–46. http://dx.doi.org/10.1007/bf02759297.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Mi, J., P. Kalt, G. J. Nathan, and C. Y. Wong. "PIV measurements of a turbulent jet issuing from round sharp-edged plate." Experiments in Fluids 42, no. 4 (February 18, 2007): 625–37. http://dx.doi.org/10.1007/s00348-007-0271-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!