Books on the topic 'Rolling Contact'

Jacobson, Bo, and Joost J. Kalker, eds. Rolling Contact Phenomena. Vienna: Springer Vienna, 2000. http://dx.doi.org/10.1007/978-3-7091-2782-7.

1942-, Jacobson Bo O., Kalker Joost J, and International Centre for Mechanical Sciences, eds. Rolling contact phenomena. Wien, [Austria]: Sprinter, 2000.

Hadfield, Mark. Rolling contact fatigue of ceramics. Uxbridge: Brunel University, 1993.

Danyluk, Michael, and Anoop Dhingra. Rolling Contact Fatigue in a Vacuum. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11930-4.

Kalker, J. J. Three-dimensional elastic bodies in rolling contact. Dordrecht: Kluwer Academic Publishers, 1990.

Kalker, J. J. Three-Dimensional Elastic Bodies in Rolling Contact. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-015-7889-9.

Kalker, J. J. Three-Dimensional Elastic Bodies in Rolling Contact. Dordrecht: Springer Netherlands, 1990.

Svidenko, V. N. Silovye parametry pri uprugoplasticheskom kontakte. Alma-Ata: "Nauka" Kazakhskoĭ SSR, 1990.

United States. National Aeronautics and Space Administration., ed. investigation of rolling contact fatigue of ball bearings. Washington, D.C: National Aeronautics and Space Administration, 1988.

Harris, Tedric A. Rolling bearing analysis. 3rd ed. New York: Wiley, 1991.

N, Kotzalas Michael, ed. Rolling bearing analysis. 5th ed. Boca Raton, FL: CRC/Taylor & Francis, 2007.

Aruti︠u︡ni︠a︡n, N. Kh. Kontaktnye zadachi teorii polzuchesti. Erevan: Izd-vo. AN Armi︠a︡nskoĭ SSR, 1990.

Piec, Paweł. Analiza zjawisk kontaktowych typu stick-slip w miejscu styku koła z klockiem hamulcowym. Kraków: Politechnika Krakowska im. Tadeusza Kościuszki, 1995.

Jaschinski, Alfred. Anwendung der Kalkerschen Rollreibungstheorie zur dynamischen Simulation von Schienenfahrzeugen. Koln: DFVLR, 1987.

Cenek, P. D. Rolling resistance characteristics of New Zealand roads. Wellington, N.Z: Transit New Zealand, 1996.

Rydz, Dariusz. Analiza procesu walcowania blach bimetalowych z zastosowaniem rozwiązań dla ciał lepkosprężystych. Częstochowa: Wydawn. Politechniki Częstochowskiej, 2009.

Chen, Yong Kang. Tribology of polymers and composites in unlubricated rolling and sliding contact. Birmingham: University of Birmingham, 1996.

Tielens, A. G. G. M. and United States. National Aeronautics and Space Administration., eds. Resistance to rolling in the adhesive contact of two elastic spheres. [Washington, DC: National Aeronautics and Space Administration, 1998.

Tielens, A. G. G. M. and United States. National Aeronautics and Space Administration., eds. Resistance to rolling in the adhesive contact of two elastic spheres. [Washington, D.C: National Aeronautics and Space Administration, 1995.

L, Johnson K. Contact mechanics. Cambridge [Cambridgeshire]: Cambridge University Press, 1987.

L, Johnson K. Contact mechanics. Cambridge [Cambridgeshire]: Cambridge University Press, 1985.

Lobas, L. G. Negolonomnye modeli kolesnykh ėkipazheĭ. Kiev: Nauk. dumka, 1986.

Kuzʹmin, G. E., I. V. I︠A︡kovlev, and V. V. Paĭ. Volnoobrazovanie pri kosykh soudarenii︠a︡kh. Novosibirsk: Rossiĭskai︠a︡ akademii︠a︡ nauk, Sibirskoe otd-nie, In-t gidrodinamiki im. M.A. Lavrentʹeva, 2000.

1937-, Huston Ronald L., Oswald Fred B, United States. Army Aviation Research and Technology Activity., and United States. National Aeronautics and Space Administration., eds. Contact stresses in meshing spur gear teeth: Use of an incremental finite element procedure. [Washington, D.C.?]: National Aeronautics and Space Administration, 1992.

D, Nowell, and Sackfield A, eds. Mechanics of elastic contacts. Oxford [England]: Butterworth-Heinemann, 1993.

Association, International Heavy Haul. Guidelines to best practices for heavy haul railway operations: Wheel and rail interface issues. Virginia Beach, Va: International Heavy Haul Association, 2001.

Dżuła, Stanisław. Dynamika wirującego koła i zestawu kołowego modelowanych układami ciągłymi. Kraków: Politechnika Krakowska im. Tadeusza Kościuszki, 1995.

Kenis, William. Analysis of pavement structural variability. McLean, VA: U.S. Dept. of Transportation, Federal Highway Administration, Research and Development, Turner-Fairbank Highway Research Center, 1997.

C, Hoo J. J., and American Society for Testing and Materials., eds. Creative use of bearing steels. Philadelphia, PA: ASTM, 1993.

D, Voloshko I͡U︡, and Dnepropetrovskiĭ gosudarstvennyĭ tekhnicheskiĭ universitet zheleznodorozhnogo transporta. Kafedra "Putʹ i putevoe khozi͡a︡ĭstvo.", eds. Voprosy vzaimodeĭstvii͡a︡ puti i podvizhnogo sostava: Mezhvuzovskiĭ sbornik nauchnykh trudov. Dnepropetrovsk: Dnepropetrovskiĭ gos. tekhn. universitet zheleznodorozhnogo transporta, 1994.

Zaretsky, Erwin V. Comparison of life theories for rolling-element bearings. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Zaretsky, Erwin V. Comparison of life theories for rolling-element bearings. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Isaev, Igorʹ Petrovich. Problemy st͡s︡eplenii͡a︡ koles lokomotiva s relʹsami. Moskva: "Mashinostroenie", 1985.

C, Hoo J. J., American Society for Testing and Materials. Subcommittee A01.28 on Bearing Steels., and American Society for Testing and Materials. Committee A-1 on Steel, Stainless Steel, and Related Alloys., eds. Effect of steel manufacturing processes on the quality of bearing steels. Philadelphia, PA: ASTM, 1988.

Roisum, David R. Web words. Atlanta, Ga: TAPPI Press, 2000.

Cellar, Horst. Untersuchung des Dämpfungsverhaltens der Schlupfstelle zwischen Rad und Schiene. Mülheim/Ruhr: Kirnberg-Verlag, 1989.

Liao, Peikai. Tribological behaviour and thermal analysis of polymers and polymer composites in unlubricated rolling-sliding contact. Birmingham: University of Birmingham, 1996.

Karaszewski, Waldemar. Badanie wpływu wybranych czynników na rwałość ceramicznych elementów łożysk tocznych: Research on the effects of selected factors on the life of ceramic rolling bearing elements. Gdańsk: Wydawnictwo Politechniki Gdańskiej, 2013.

Beswick, John, ed. Bearing Steel Technologies: 9th Volume, Advances in Rolling Contact Fatigue Strength Testing and Related Substitute Technologies. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2012. http://dx.doi.org/10.1520/stp1548-eb.

Beswick, John M., 1945- editor of compilation and American Society for Testing and Materials. Committee A-1 on Steel, Stainless Steel, and Related Alloys, eds. Bearing steel technologies: 9th volume : advances in rolling contact fatigue strength testing and related substitute technologies. West Conshohocken, PA: ASTM International, 2012.

L, Grassie S., ed. Mechanics and fatigue in wheel/rail contact: Proceedings of the Third International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Cambridge, U.K. July 22-26, 1990. Amsterdam: Elsevier, 1991.

(Firm), Knovel, ed. Wheel-rail interface handbook. Boca Raton, FL: CRC Press, 2009.

N, Bamberger Eric, United States. Army Aviation Research and Technology Activity., and United States. National Aeronautics and Space Administration., eds. Surface fatigue life of carburized and hardened M50NiL and AISI 9310 spur gears and rolling-contact test bars. [Washington, DC]: National Aeronautics and Space Administration, 1989.

Stolarski, T. A., and S. Tobe. Rolling Contacts. Chichester, UK: John Wiley & Sons, Ltd, 2000. http://dx.doi.org/10.1002/9781118903001.

Kang, Jinsheng. Influences of surface quality on the rolling contact fatique behaviour of ceramics: An investigation into the relationship between the finishing process, surface quality and failure modes of advanced Si3N4 rolling elements. Poole: Bournemouth University, 2001.

R, Jones William, and NASA Glenn Research Center, eds. The effect of stress and TiC coated balls on lubricant lifetimes using a vacuum ball-on-plate rolling contact tribometer. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

Whitehouse, Patricia. Rodar. Chicago, Ill: Heinemann Library, 2003.

Chao-Duivis, M. A. B. Veranderende rollen: Een inleiding in nieuwe contractvormen in het bouwrecht. Deventer: Kluwer, 2001.

New York (State). Metropolitan Transportation Authority. Office of the Inspector General. Review of the New York City Transit Authority contract awards for the R-36 subway car overhaul program. [New York]: Office of the Inspector General, Metropolitan Transportation Authority, 1985.

Maznev, Aleksandr, and Oleg Shatnev. Electric apparatus and circuits of rolling stock. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1014641.