Relevant bibliographies by topics / Recrystallization

Academic literature on the topic 'Recrystallization'

Author: Grafiati
Published: 4 June 2021
Last updated: 8 June 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Recrystallization.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Recrystallization"

1

Wang, Guoxin, Pingli Mao, Zhi Wang, Le Zhou, Feng Wang, and Zheng Liu. "Hot Deformation Behavior of an As-Extruded Mg-2.5Zn-4Y Alloy Containing LPSO Phases." Metals 12, no. 4 (April 14, 2022): 674. http://dx.doi.org/10.3390/met12040674.

Full text
Abstract:
The hot deformation and dynamic recrystallization (DRX) characteristics of an as-extruded Mg-2.5Zn-4Y alloy containing long-period stacking ordered (LPSO) phases were investigated using a Gleeble 3500 thermal simulator at temperatures (300–400 °C) and strain rates (0.001–1 s−1). The results revealed that low flow stress corresponded to a high temperature and a low strain rate. An increase in the temperature of deformation caused an increase in the amount of dynamic recrystallization. Additionally, as the strain rate decreased at a given deformation temperature, dislocations were less likely to cause pile-up and dynamic recrystallization was more appropriate, resulting in a lower stress value. Kink deformation was clearly minimized as the number of dynamic recrystallizations increased. The test alloy’s activation energy value was determined as 212.144 kJ/mol.
APA, Harvard, Vancouver, ISO, and other styles
2

MacKenzie, Alan P. "Recrystallization." Cryobiology 22, no. 6 (December 1985): 601. http://dx.doi.org/10.1016/0011-2240(85)90038-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Iqra Zubair Awan, Iqra Zubair Awan. "Recovery, Recrystallization, and Grain-Growth." Journal of the chemical society of pakistan 41, no. 1 (2019): 1. http://dx.doi.org/10.52568/000707/jcsp/41.01.2019.

Full text
Abstract:
This is a brief review of the important phenomena of recovery, recrystallization as well as grain-growth. The three mentioned phenomena are the mechanisms by which metals and alloys fix the structural damage introduced by the mechanical deformation and, as a consequence, in the physical and mechanical properties. These rehabilitation mechanisms are thermally activated. For this process, the materials have to be heated and any such heat-treatment is meant to reduce deformation-induced break is termed annealing. Other or different heat-treatments lead to recovery and recrystallization. It is rather strange that, though these phenomena are extremely important in metallurgical science and engineering, not so much work has been done as that in corrosion and shape memory technologies. An attempt has been made here to summarize all important aspects of these phenomena for the benefits of students of metallurgy, chemistry and solid state physics.
APA, Harvard, Vancouver, ISO, and other styles
4

Kaverinsky, V. V., and Z. P. Sukhenko. "Mathematical Modelling of Primary Recrystallization Kinetics and Precipitation of Carbonitride Particles in Steels. II. Recrystallization Kinetics." METALLOFIZIKA I NOVEISHIE TEKHNOLOGII 43, no. 2 (April 23, 2021): 235–44. http://dx.doi.org/10.15407/mfint.43.02.0235.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Schaller, R., and Andre Rivière. "3.6 Recrystallization." Materials Science Forum 366-368 (March 2001): 276–90. http://dx.doi.org/10.4028/www.scientific.net/msf.366-368.276.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Brunner, Julian, Britta Maier, Rose Rosenberg, Sebastian Sturm, Helmut Cölfen, and Elena V. Sturm. "Nonclassical Recrystallization." Chemistry – A European Journal 26, no. 66 (October 16, 2020): 15242–48. http://dx.doi.org/10.1002/chem.202002873.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Xiong, J. C., Jia Rong Li, Y. S. Luo, and Shi Zhong Liu. "Surface Recrystallization and Twin Formation in a Single Crystal Superalloy." Materials Science Forum 706-709 (January 2012): 2490–95. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.2490.

Full text
Abstract:
The samples of single crystal superalloy DD6 were grit blasted and then heat treated in the temperature range of 1100-1250°C for 4h and the DD6 alloy ‘standard heat treatment’ in vacuum furnace, respectively. The results showed that cellular recrystallization occurred in the surface layer after heating at 1100°C for 4 hours. While equiaxed recrystallization grains occurred near the surface of the samples annealed at 1200°C for 4 hours, meanwhile, cellular recrystallization located between equiaxed recrystallization grains and the original region. With the improvement of the heating temperature, the size of cellular recrystallization decreased, while the size of equiaxed recrystallization grains increased, and the shape of the coarse γ′ phase in the cellular recrystallization changed from lamellar to equiaxial. Fully equiaxed recrystallization grains nucleated after standard heat treatment. Furthermore, the twins occurred in fully equiaxed recrystallization grains, and that the γ′ phase of the twin plane appeared different from that of the equiaxed recrystallization boundary. On the contrary, the twin formation was not observed in the cellular recrystallization grains. Therefore, the differences in twin behavior between the fully equiaxed recrystallization and cellular recrystallization grains were discussed.
APA, Harvard, Vancouver, ISO, and other styles
8

Huo, Wang Tu, Ming Xing Guo, Long Gang Hou, Hua Cui, Tao Tao Sun, Lin Zhong Zhuang, and Ji Shan Zhang. "Recrystallization Behavior of High-Strength AA 7075 Alloy Processed by New Short-Cycled Thermo-Mechanical Processing." Materials Science Forum 794-796 (June 2014): 1269–74. http://dx.doi.org/10.4028/www.scientific.net/msf.794-796.1269.

Full text
Abstract:
Recrystallization behavior under different conditions (different temperatures and times) of AA 7075 alloy processed by new short-cycled thermo-mechanical processing was investigated to design a suitable recrystallization schedule. With acquiring recrystallization activation energy by DSC, the recrystallization behavior was successfully verified by theoretical calculation. Experimental results of recrystallization response and re-dissolution of precipitates during isothermal annealing reveal excellent agreement with DSC prediction. The results show that the obtained activation energy of recrystallization can be used to establish the relationship between recrystallization temperatures and times. It is proposed that an appropriate recrystallization treatment (703-753 K/1-5 min) could be used to acquire completely recrystallized grains with size <10 μm, contributing to better formability/ductility. The coarsening rate of these fine recrystallized grains is fairly low even though extending the solution treatment times at 753 K. Therefore, it indicates that the recrystallization dynamical equation would be a useful method to adjust recrystallization temperatures and times to satisfy various requirements of structures and properties.
APA, Harvard, Vancouver, ISO, and other styles
9

Engler, Olaf. "Simulation of Recrystallization and Recrystallization Textures in Aluminium Alloys." Materials Science Forum 715-716 (April 2012): 399–406. http://dx.doi.org/10.4028/www.scientific.net/msf.715-716.399.

Full text
Abstract:
The control of the plastic anisotropy during forming of a metallic sheet requires detailed knowledge on its microstructure and, especially, crystallographic texture. During the thermo-mechanical processing of aluminium sheet products in commercial production lines the material experiences a complex history of temperature, time and strain paths, which result in alternating cycles of deformation and recrystallization with the associated changes in texture and microstructure. Thus, computer-based alloy and process development requires integration of models for simulating the evolution of microstructure, microchemistry and crystallographic texture into process models of the thermo-mechanical production of Al sheet. The present study focuses on recent developments in linking softening modules that simulate the progress of recovery and recrystallization with the following texture changes to deformation and microchemistry models.
APA, Harvard, Vancouver, ISO, and other styles
10

Qi, Hong Na, Zhi Min Zhang, Jian Min Yu, Xue Yan Yin, and Zhi Yuan Du. "Dynamic Recrystallization of Mg-8Gd-3Y-1Nd-0.5Zr Alloy during Hot Deformation." Materials Science Forum 898 (June 2017): 311–22. http://dx.doi.org/10.4028/www.scientific.net/msf.898.311.

Full text
Abstract:
Uniaxial hot compression was conducted on Gleeble-3500 thermo simulation machine. Based on stress-strain curves, the constitutive relationship and the dynamic recrystallization kinetics model of Mg-8Gd-3Y-1Nd-0.5Zr were established. Simultaneously, dynamic recrystallization mechanism of this alloy under different deformation condition was investigated by SEM, EBSD and OM. The critical strain equation and the dynamic recrystallization kinetics model were obtained. The results showed that the dynamic recrystallization volume fraction increased with the increasing of the strain.The twin dynamic recrystallization (TDRX) was the mainly DRX mechanism at 350°C;the dynamiac recrysallization mechanism was dominated by continuous dynamic recrystallization (CDRX) at 400°C and 450°C. At higher temperature (500°C), the dynamic recrystallization was dominated by discontinuous dynamic recrystallization (DDRX) with a small amount of CDRX.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Recrystallization"

1

Tavernier, Philippe. "Modeling of recrystallization textures." Thesis, McGill University, 1989. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=61775.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jeniski, Richard A. Jr. "Recrystallization behavior of aluminum alloy 6013." Thesis, Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/19412.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Halfpenny, Angela. "Recrystallization microstructures and mechanisms in quartzites." Thesis, University of Liverpool, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.485942.

Full text
Abstract:
Electron backscatter diffraction (EBSD) has been used to analyse 25 quartz rich rocks. The rock samples represent a range ofcommon microstructures which exhibit variations in the defonnation conditions such as changes in temperature and the amount of strain accumulated. As natural sample's defonnation conditions are poorly constrained, five out of the 25 samples were experimentally defonned samples. EBSD has been used to measure the full crystallographic orientation of all the grains contained within the mapped area The mapped microstructures have been separated out in to original 'parent' grains and recrystallized 'daughter' grains. Neighbour-daughter grains are recrystallized grains which are still in contact with a parent grain (although not necessarily its own). The samples exhibit between 10% and 95% recrystallized microstructures. The samples can be separated into two main groups based upon their microstructural and statistical characteristics. The first group represents samples which have an average subgrain size which is similar in size to the neighbour-daughters. The parent grains show a systematic increase in misorientation from the centre ofthe grain to the edges. These data are consistent with subgrain rotation (SGR) as being the controlling nucleation and recrystallization mechanism The second group ofsamples show an average subgrain size which is much larger than the size of the neighbour-daughter grains. The internal defonnation of the parent grains is randomly arranged and does not gradually increase. These data are inconsistent with SGR The recrystallization was facilitated by bulging at low temperatures or during strain-induced grain boundary migration (SIGBM). All samples studied exhibited angles between the parent and neighbourdaughter grains which had increased after nucleation and recrystallization had taken place. Each sample analysed had at least 50% of the grain boundaries with misorientation angles ofgreater than 30°. Other processes have increased the misorientation angles. The distnbutions of the neighbour-daughter grains have also been redistnbuted from being in contact with the parent they are theorized to have recrystallized from to being located either next to another parent or in the matrix. The microstructures have been modified. Grain boundary sliding (GBS) is interpreted as the controlling modification mechanism which caused the neighbour-switching and further rotations of the recrystallized grains to cause the increased misorientation angles observed.
APA, Harvard, Vancouver, ISO, and other styles
4

Makin, P. L. "Recrystallization in aluminium-lithium based alloys." Thesis, University of Cambridge, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.356656.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

James, Orin Anthony. "The effects of glycerol on recrystallization." Diss., Online access via UMI:, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Svensson, Christoffer. "Recrystallization mapping of Ni-base alloys." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-75348.

Full text
Abstract:
Superalloys such as alloy 718 and 925 possesses superior properties at elevated temperatures and corrosive environments. They are commonly found in application such as oil and gas extraction, turbine engines and in the chemistry industry. These alloys were developed during the 1950s but the demand of tubes and pipes of these alloys has rapidly increased. Sandvik has recently started produce these products and faces new challenges within the production.There are several studies within the area of superalloys but the hot working behavior and flow softening mechanism are not fully understood.The goal with this master thesis is to analyze two different steel grades, alloy 718 and 925 and correlate different process parameters that will influence the recrystallization initiation and nucleation.Two ingots manufactured through electric arc furnace, argon oxygen decarburization and refined by vacuum arc remelting were analyzed followed by a homogenization heat treatment. Samples were extracted from three positions, bottom, center, top and from half the radius in the ingot. The chemical composition was analyzed and the mechanical properties was tested trough hot compression testing (Gleeble). From Gleeble testing, the true strain, stress curves were analyzed in order to determine flow softening effects. The microstructure were studied trough light optical microscopy and electron backscatter diffraction.The results reveal that discontinuous dynamic recystallization is the dominant flow softening mechanism. There was no significant difference between the three positioning within the ingot.To maximize the recrystallized area fraction higher strain and temperatures must be provided or lower strain rates.
APA, Harvard, Vancouver, ISO, and other styles
7

Helgeson, Maria Rose. "Fe(II)-catalyzed recrystallization of hematite." Thesis, University of Iowa, 2014. https://ir.uiowa.edu/etd/1466.

Full text
Abstract:
Hematite (α-Fe2O3) is a common, naturally occurring iron oxide, found throughout the earth's crust and atmosphere. Hematite is of interest to the scientific community because it is able to incite a reaction that produces hydrogen gas (H2), which is a form of clean energy (Bora et al., 2013). The composition of hematite in nature is also used to make inferences about conditions on early earth's surface (Guo et al., 2013). Hematite is useful for clean energy production and as an environmental indicator partly because of its apparent stability. However, some evidence suggests that hematite might not be as stable as previously thought. Many iron oxides undergo Fe atom exchange when they come into contact with aqueous Fe(II), as often occurs in nature (Pedersen et al., 2005, Jones et al., 2009, Gorski et al., 2012, Handler et al., 2009). This atom exchange can result in elements and nutrients being taken up or released from the iron oxides as they recrystallize (Frierdich & Catalano, 2012, Cwiertny et al., 2008, Boland et al., 2014). Although atom exchange has not been directly shown in hematite, it has been demonstrated that trace metals are released from hematite in the presence of aqueous Fe(II), implying that exchange may be occurring (Frierdich et al., 2011). Here, we directly demonstrate Fe atom exchange between hematite and aqueous Fe(II). This work provides knowledge concerning the surface chemistry of hematite that has important implications for clean energy production and the environment.
APA, Harvard, Vancouver, ISO, and other styles
8

Hopkin, Gareth John. "Modelling anisothermal recrystallization in austenitic stainless steels." Thesis, University of Cambridge, 2002. https://www.repository.cam.ac.uk/handle/1810/221867.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ranganathan, Kannan. "Recrystallization resistance in aluminum alloys containing zirconium." Diss., Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/19560.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Roucoules, Christine. "Dynamic and metadynamic recrystallization in HSLA steels." Thesis, McGill University, 1992. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=39794.

Full text
Abstract:
A Mo, a Nb and a Ti steel were tested in torsion to study the characteristics of dynamic and postdynamic recrystallization. To characterize dynamic recrystallization, continuous torsion tests were carried out between 850 and 1050$ sp circ$C at strain rates of 0.02, 0.2 and 2s$ sp{-1}.$ Quenches were performed to investigate the grain refinement produced by dynamic recrystallization. Interrupted torsion tests were performed between 850 and 1050$ sp circ$C and at strain rates between 0.02 and 2s$ sp{-1}$ to study the characteristics of postdynamic recrystallization. Quenches were performed after increasing holding times to follow the evolution of the postdynamic microstructure. The evolution of the grain size distribution as a function of holding time shows that the growth of dynamically recrystallized grains is the first change that takes place. Then metadynamically recrystallized grains appear and contribute to the softening of the material. The rate of metadynamic recrystallization increases with strain rate and temperature and is observed to be independent of strain, in contrast to the observations for static recrystallization. The dependence of the metadynamically recrystallized grain size on the Zener-Hollomon parameter was established and is shown to differ from static recrystallization dependence. Simple torsion simulations were carried out using constant interpass times to study the conditions under which dynamic, metadynamic or static recrystallization takes place. Dynamic recrystallization controlled rolling (DRCR) is shown to require such short interpass times that they are not attainable in hot strip mills. A new concept, metadynamic recrystallization controlled rolling (MDRCR), is introduced to describe the case where there is 20 to 80% softening by metadynamic recrystallization. The occurrence of dynamic and metadynamic recrystallization causes the load to increase less rapidly than in the case of pure strain accumulation.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Recrystallization"

1

Sc, Chandra T. M., University of Wollongong, and Minerals, Metals and Materials Society., eds. Recrystallization '90: International Conference on Recrystallization in Metallic Materials : conference proceedings. Warrendale, Pa: TMS, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Generazio, Edward R. Ultrasonic determination of recrystallization. [Washington, D.C.]: NASA, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

M, Hatherly, ed. Recrystallization and related annealing phenomena. Oxford, OX, UK: Pergamon, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

M, Hatherly, ed. Recrystallization and related annealing phenomena. 2nd ed. Amsterdam: Elsevier, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

United States. National Aeronautics and Space Administration., ed. Investigation of welding and brazing of molybdenum and TZM alloy tubes. Birmingham, AL: Southern Research Institute, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

United States. National Aeronautics and Space Administration., ed. Investigation of welding and brazing of molybdenum and TZM alloy tubes. Birmingham, AL: Southern Research Institute, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gorelik, S. S. Rekristallizat︠s︡ii︠a︡ metallov i splavov. Moskva: Moskovskiĭ gos. institut stali i splavov. Tekhnologicheskiĭ universitet, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Novikov, V. I͡U. Vtorichnai͡a rekristallizat͡sii͡a. Moskva: "Metallurgii͡a", 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Risø International Symposium on Materials Science (16th 1995). Microstructural and crystallographic aspects of recrystallization: Proceedings of the 16th Risø International Symposium on Materials Science, 4-8 September 1995. Edited by Hansen N. Roskilde, Denmark: Risø National Laboratory, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

International Conference on Recrystallization and Related Phenomena (1992 San Sebastian, Spain). Recrystallization '92: International Conference on Recrystallization and Related Phenomena, San Sebastian, Spain, August 31-September 4, 1992. Edited by Fuentes M and Gil Sevillano J. Aedermannsdorf, Switzerland: Trans Tech Publications, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Recrystallization"

1

Tianmo, Liu, and Xu Kuangdi. "Dynamic Recrystallization." In The ECPH Encyclopedia of Mining and Metallurgy, 1–2. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-0740-1_917-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Verma, Ashok Kumar. "Recrystallization of Ice." In Encyclopedia of Earth Sciences Series, 932. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-90-481-2642-2_439.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Budke, Carsten, and Thomas Koop. "Inhibition of Recrystallization." In Antifreeze Proteins Volume 2, 159–84. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-41948-6_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Minggao, Yan, Wang Qingsui, and Xu Kuangdi. "Recovery and Recrystallization." In The ECPH Encyclopedia of Mining and Metallurgy, 1–4. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-0740-1_931-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Generazio, Edward R. "Ultrasonic Determination of Recrystallization." In Review of Progress in Quantitative Nondestructive Evaluation, 1463–73. Boston, MA: Springer US, 1987. http://dx.doi.org/10.1007/978-1-4613-1893-4_165.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Holm, E. A., A. D. Rollett, and D. J. Srolovitz. "Mesoscopic Simulations of Recrystallization." In Computer Simulation in Materials Science, 373–89. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-1628-9_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gottstein, Günter. "Recovery, Recrystallization, Grain Growth." In Physical Foundations of Materials Science, 303–56. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-09291-0_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Urai, J. L., W. D. Means, and G. S. Lister. "Dynamic recrystallization of minerals." In Mineral and Rock Deformation: Laboratory Studies, 161–99. Washington, D. C.: American Geophysical Union, 1986. http://dx.doi.org/10.1029/gm036p0161.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Mittemeijer, Eric J. "Recovery, Recrystallization and Grain Growth." In Fundamentals of Materials Science, 463–96. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-10500-5_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kupecz, Julie A., Isabel P. Montanez, and Guoqiu Gao. "Recrystallization of Dolomite with Time." In Carbonate Microfabrics, 187–93. New York, NY: Springer New York, 1993. http://dx.doi.org/10.1007/978-1-4684-9421-1_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Recrystallization"

1

WÖRNER, C. H. "ONE-DIMENSIONAL RECRYSTALLIZATION." In Proceedings of the First Latin American Summer School. WORLD SCIENTIFIC, 2000. http://dx.doi.org/10.1142/9789812793317_0009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

van Esch, Hans, Stijn Pietersen, Alex Bridges, John Scheibel, Robert Zuber, and Wayne Greaves. "Recrystallization of René N4 and N5." In ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-81438.

Full text
Abstract:
Abstract Recrystallization of equiaxed, directionally solidified and single crystal cast nickel base superalloys can occur during some of the manufacturing and repair processes. While equiaxed, and to a lesser extent, directionally solidified cast nickel-based superalloys have grain boundary strengthening this is nonexistent for single crystal superalloys. Therefore, it is especially important to avoid or limit recrystallization during manufacture and repair of these nickel base single crystal gas turbine components. This study performed by TEServices, EPRI, MD&A and Sulzer concerns the effect of recrystallization when compressive stresses are introduced during manufacturing and repair processes (grit cleaning and shot peening) when followed by (full solution, partial solution and stress relieve) heat treatments. The objective of this paper is to obtain a better understanding the recrystallization behavior of two single crystal superalloys, René N4 and N5, during the repair processes (grit cleaning, shot peening and heat treatments) and determine how to minimize the depth of recrystallization. The impact of recrystallization on mechanical strength (stress rupture and fatigue) on René N4 material was limitedly tested. This study concludes that for both single crystal alloys, René N4 and N5, the less compressive stresses that are introduced during manufacturing and repair, and the lower temperature of exposure during follow up heat treatments, results in a lower recrystallization layer depth.
APA, Harvard, Vancouver, ISO, and other styles
3

Trappe, Cyril, Stefan Facsko, Berangere Hyot, Bernard Bechevet, and Heinrich Kurz. "Recrystallization velocity of phase-change material." In International Symposium on Optical Memory and Optical Data Storage. SPIE, 1999. http://dx.doi.org/10.1117/12.997646.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lempenauer, K., and E. Arzt. "The Role of Carbide Phases in the Secondary Recrystallization of Nickel-Base ODS-Superalloys." In ASME 1991 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/91-gt-404.

Full text
Abstract:
In ODS nickel-base alloys with high γ′-content (e.g. MA760) the rate of heating to the recrystallization temperature plays an important role for the success of the recrystallization treatment. Previous results (Jongenburger et al., 1990) revealed the existence of a heating rate window for secondary recrystallization. While the lower limit of this window (Ṫmin) is well understood, an attempt is made in this paper to explain the upper limit (Ṫmax) by the influence of carbide phases. Furthermore it is shown that carbide phases may also influence the incipient melting temperature and consequently the width of the temperature window for successful secondary recrystallization.
APA, Harvard, Vancouver, ISO, and other styles
5

Bange, M. E., A. J. Beaudoin, M. G. Stout, and S. R. MacEwen. "Measurement of the Material State Including the Effects of Recovery and Recrystallization." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1865.

Full text
Abstract:
Abstract Deformation at elevated temperatures in combination with high strain rates leads to recovery and recrystallization in aluminum alloys. Previous work in recrystallization has emphasized the detailing of microstructural trend in progression from the deformed to the annealed state. In the following, we examine the effect of rate dependence on deformation on AA 5182 and AA 6061. It is demonstrated that identification of underlying microstructural mechanisms is critical. An experimental program is then outlined for characterization of recovery and recrystallization of AA 5182. Instantaneous hardening rate and flow stress are developed from interrupted compression tests. These data are used to establish a quantitative measure of recovery through evaluation of a state variable for work hardening, the mechanical threshold. It is intended that the results serve as a foundation for development of relations for evolution of a mechanical state variable in the presence of recrystallization. Such a framework is necessary for the practical prediction of interstand recrystallization in hot rolling operations.
APA, Harvard, Vancouver, ISO, and other styles
6

Singh, R. P., J. M. Hyzak, T. E. Howson, and R. R. Biederman. "Recrystallization Behavior of Cold Rolled Alloy 718." In Superalloys. TMS, 1991. http://dx.doi.org/10.7449/1991/superalloys_1991_205_215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Jun, Changqing Liu, Paul P. Conway, Jun Zeng, and Changhai Wang. "Growth and recrystallization of electroplated copper columns." In High Density Packaging (ICEPT-HDP). IEEE, 2009. http://dx.doi.org/10.1109/icept.2009.5270660.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Moser, Amy C., Bradley Hacker, Ryan K. Stoner, and George Gehrels. "DATING DYNAMIC RECRYSTALLIZATION: MICROSTRUCTURAL GEOCHRONOLOGY OF TITANITE." In GSA Annual Meeting in Phoenix, Arizona, USA - 2019. Geological Society of America, 2019. http://dx.doi.org/10.1130/abs/2019am-334604.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Golus, Daniel F., and Nick Deardorff. "RECRYSTALLIZATION OF BASALTIC TEPHRA THROUGH REHEATING EXPERIMENTS." In Joint 52nd Northeastern Annual Section and 51st North-Central Annual GSA Section Meeting - 2017. Geological Society of America, 2017. http://dx.doi.org/10.1130/abs/2017ne-290462.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

RATUSZEK, W., A. BUNSCH, and K. CHRUŚCIEL. "RECRYSTALLIZATION TEXTURE FORMATION IN Cu-3.9Si ALLOY." In Proceedings of the XVIII Conference. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812811325_0039.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Recrystallization"

1

Baker, I., and H. J. Frost. Directional Recrystallization Processing. Fort Belvoir, VA: Defense Technical Information Center, July 2003. http://dx.doi.org/10.21236/ada417169.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hurley, David, and Stephen Reese. Demonstrate Benchtop Measurement of Recrystallization. Office of Scientific and Technical Information (OSTI), September 2017. http://dx.doi.org/10.2172/1466805.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kouzoudis, Dimitris. Recrystallization of high temperature superconductors. Office of Scientific and Technical Information (OSTI), May 1996. http://dx.doi.org/10.2172/251272.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Radhakrishnan, B., G. Sarma, and T. Zacharia. Modeling of nucleation during recrystallization. Office of Scientific and Technical Information (OSTI), November 1998. http://dx.doi.org/10.2172/290935.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rollett, A. D., and E. A. Holm. Abnormal grain growth -- The origin of recrystallization nuclei? Office of Scientific and Technical Information (OSTI), August 1997. http://dx.doi.org/10.2172/527513.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sanner, R., and R. Cook. RECRYSTALLIZATION OF PMDA AND SYNTHESIS OF AN ACETYLENIC DIAMINE. Office of Scientific and Technical Information (OSTI), September 2004. http://dx.doi.org/10.2172/15011623.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Necker, C. T., A. D. Rollett, and R. D. Doherty. The development of cube and non-cube recrystallization textures. Office of Scientific and Technical Information (OSTI), July 1995. http://dx.doi.org/10.2172/102186.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Griffith, W. L., A. L. Compere, J. M. Googin, and W. P. Huxtable. Aluminum nitrate recrystallization and recovery from liquid extraction raffinates. Office of Scientific and Technical Information (OSTI), September 1991. http://dx.doi.org/10.2172/6026818.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

D. A. Hughes, D. J. Bammann, A. Godfrey, V. C. Prantil, E. A. Holm, M. A. Miodownik, D. C. Chrzan, and M. T. Lusk. Capturing recrystallization of metals with a multi-scale materials model. Office of Scientific and Technical Information (OSTI), April 2000. http://dx.doi.org/10.2172/755112.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rockett, Angus, and Sylvain Marsillac. Post-growth Recrystallization by Halides for High Throughput CIGS Photovoltaics. Office of Scientific and Technical Information (OSTI), November 2023. http://dx.doi.org/10.2172/2217674.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Recrystallization' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography