Academic literature on the topic 'Receptance Coupling'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Receptance Coupling.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Receptance Coupling"
Tsai, Sung-Han, Huajiang Ouyang, and Jen-Yuan Chang. "A receptance-based method for frequency assignment via coupling of subsystems." Archive of Applied Mechanics 90, no. 2 (November 2, 2019): 449–65. http://dx.doi.org/10.1007/s00419-019-01619-9.
Full textSchmitz, Tony L., and G. Scott Duncan. "Three-Component Receptance Coupling Substructure Analysis for Tool Point Dynamics Prediction." Journal of Manufacturing Science and Engineering 127, no. 4 (February 4, 2005): 781–90. http://dx.doi.org/10.1115/1.2039102.
Full textPark, Simon S., Yusuf Altintas, and Mohammad Movahhedy. "Receptance coupling for end mills." International Journal of Machine Tools and Manufacture 43, no. 9 (July 2003): 889–96. http://dx.doi.org/10.1016/s0890-6955(03)00088-9.
Full textMONTEVECCHI, Filippo, Niccolo GROSSI, Antonio SCIPPA, and Gianni CAMPATELLI. "0602 Efficient receptance coupling approach for tool-tip dynamics identification." Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2015.8 (2015): _0602–1_—_0602–6_. http://dx.doi.org/10.1299/jsmelem.2015.8._0602-1_.
Full textHan, Zhen Yu, Xiang Zhang, Hong Ya Fu, and Ya Zhou Sun. "Receptance Coupling for Micro-End-Milling." Advanced Materials Research 472-475 (February 2012): 2391–96. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.2391.
Full textHung, J. P., W. Z. Lin, K. D. Wu, and W. C. Shih. "Analyzing the Dynamic Characteristics of Milling Tool Using Finite Element Method and Receptance Coupling Method." Engineering, Technology & Applied Science Research 9, no. 2 (April 10, 2019): 3918–23. http://dx.doi.org/10.48084/etasr.2463.
Full textKim, Ji-wook, Jae-wook Lee, Kun-woo Kim, Ji-heon Kang, Min-seok Yang, Dong-yul Kim, Seung-yeop Lee, and Jin-seok Jang. "Estimation of the Frequency Response Function of the Rotational Degree of Freedom." Applied Sciences 11, no. 18 (September 14, 2021): 8527. http://dx.doi.org/10.3390/app11188527.
Full textSchmitz, Tony L., Matthew A. Davies, and Michael D. Kennedy. "Tool Point Frequency Response Prediction for High-Speed Machining by RCSA." Journal of Manufacturing Science and Engineering 123, no. 4 (January 1, 2001): 700–707. http://dx.doi.org/10.1115/1.1392994.
Full textKumar, Uttara V., and Tony L. Schmitz. "Spindle dynamics identification for Receptance Coupling Substructure Analysis." Precision Engineering 36, no. 3 (July 2012): 435–43. http://dx.doi.org/10.1016/j.precisioneng.2012.01.007.
Full textSchmitz, Tony, Andrew Honeycutt, Michael Gomez, Michael Stokes, and Emma Betters. "Multi-point coupling for tool point receptance prediction." Journal of Manufacturing Processes 43 (July 2019): 2–11. http://dx.doi.org/10.1016/j.jmapro.2019.03.043.
Full textDissertations / Theses on the topic "Receptance Coupling"
Duncan, Gregory S. "Milling dynamics prediction and uncertainty analysis using receptance coupling substructure analysis." [Gainesville, Fla.] : University of Florida, 2006. http://purl.fcla.edu/fcla/etd/UFE0015544.
Full textKumar, Uttara Vijay. "Comparison of equivalent diameter end mill models for dynamics prediction by receptance coupling substructure analysis." [Gainesville, Fla.] : University of Florida, 2009. http://purl.fcla.edu/fcla/etd/UFE0041355.
Full textKiefer, Aaron J. "Integrating electromechanical actuator hardware with receptance coupling substructure analysis for chatter prediction on high speed machining centers." 2004. http://www.lib.ncsu.edu/theses/available/etd-04162004-161118/unrestricted/etd.pdf.
Full textGROSSI, NICCOLO'. "Modeling and simplification methods for machine tool dynamics prediction in high speed milling." Doctoral thesis, 2015. http://hdl.handle.net/2158/1005746.
Full textOstad, Ali Akbari Vahid. "Modelling the dynamics of vibration assisted drilling systems using substructure analysis." Thesis, 2020. http://hdl.handle.net/1828/11890.
Full textGraduate
Huang, Zhe-Hao, and 黃哲皜. "Dynamic analysis and receptacle coupling prediction for frequency response function of machine tool." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/cjn875.
Full text國立勤益科技大學
機械工程系
105
Regenerative chatter is a major factor restricting the process efficiency and the longevity of cutting tools in high speed milling process. According to the machining mechanics, the occurrence of chatter can be related to the cutting force and the structure characteristics of the machine tool structure. To meet the required machining operation without chatter, the machining conditions of a specific cutter should be appropriately selected from the stability lobes diagram. Generally, the stability of the specific cutter can be determined from the measured frequency response functions (FRFs). However this would be a complicated and time-consuming task with less efficiency. Therefore, this study employed the receptance coupling substructure analysis to predict the frequency response functions of the spindle tool. In this method the receptance matrices of the substructures, tool holder/tool module (substructure A) and spindle nose (substructure B), are composed of the linear and rotational FRFs under excitation force and moment. The force induced dynamic compliance FRFs of the tool holder/tool modules were experimentally measured by impact vibration tests and the FRFs induced by moment were assessed through the finite element simulations. In prediction algorithm, the interface stiffness matrix between spindle nose and tool holder was calculated through the reversed operation of the receptance matrices of the selected spindle tool and tool holder/tool module. With the identified interface matrix, the FRFs and dynamic compliance of a specific cutter with different flute number , diameter and overhung length were predicted by proposed method, which were also successfully verified with the experimental measurements.
Book chapters on the topic "Receptance Coupling"
Schmitz, Tony L., and K. Scott Smith. "Receptance Coupling." In Mechanical Vibrations, 367–414. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52344-2_10.
Full textSchmitz, Tony L., and K. Scott Smith. "Receptance Coupling." In Mechanical Vibrations, 321–66. Boston, MA: Springer US, 2011. http://dx.doi.org/10.1007/978-1-4614-0460-6_9.
Full textJasiewicz, M., and B. Powałka. "Receptance coupling for turning with a follower rest." In Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues, 245–48. CRC Press, 2016. http://dx.doi.org/10.1201/b20057-54.
Full textConference papers on the topic "Receptance Coupling"
Burns, Timothy J., and Tony L. Schmitz. "Receptance Coupling Study of Tool-Length Dependent Dynamic Absorber Effect." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60081.
Full textSchmitz, Tony L. "Improved Sensor Data Utility Through Receptance Coupling Modeling." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59762.
Full textBurns, Timothy J., and Tony L. Schmitz. "A Study of Linear Joint and Tool Models in Spindle-Holder-Tool Receptance Coupling." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-85275.
Full textJasiewicz, Marcin, and Bartosz Powałka. "Prediction of turning stability using receptance coupling." In COMPUTER METHODS IN MECHANICS (CMM2017): Proceedings of the 22nd International Conference on Computer Methods in Mechanics. Author(s), 2018. http://dx.doi.org/10.1063/1.5019090.
Full textRezaei, M. M., M. R. Movahhedy, M. T. Ahmadian, and H. Moradi. "Development of Inverse Receptance Coupling Method for Prediction of Milling Dynamics." In ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-24912.
Full textZhongqun, Li, Li Shuo, and Chen Yizhuang. "Receptance Coupling for End Mill Using 2-Section Step Beam Vibration Model." In 2009 Second International Conference on Intelligent Computation Technology and Automation. IEEE, 2009. http://dx.doi.org/10.1109/icicta.2009.276.
Full textJin, Xiaoliang, and Narahara Gopal Koya. "Prediction of Coupled Torsional-Axial Vibrations of Drilling Tool With Clamping Boundary Conditions." In ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8665.
Full textYigit, Ahmet S., and A. Galip Ulsoy. "Application of Nonlinear Receptance Coupling to Dynamic Stiffness Evaluation for Reconfigurable Machine Tools." In ASME 2001 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/detc2001/vib-21397.
Full textEdoimioya, Nosakhare, and Chinedum E. Okwudire. "An Efficient Control-oriented Modeling Approach for Vibration-prone Delta 3D printers using Receptance Coupling." In 2021 IEEE 17th International Conference on Automation Science and Engineering (CASE). IEEE, 2021. http://dx.doi.org/10.1109/case49439.2021.9551537.
Full textMascardelli, Brock A., Simon S. Park, and Theodor Freiheit. "Substructure Coupling of Micro-End Mills." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13129.
Full text