Journal articles: 'RCC BUILDING'

1

Mourya, Rahul, Harshal Lohar, Dhanvir Rodge, Dhanraj Pawar, and Pallavi Kharat. "Structural Audit of RCC Structure." YMER Digital 21, no. 05 (May 21, 2022): 966–74. http://dx.doi.org/10.37896/ymer21.05/a9.

Full text

Abstract:

The Government Agency like Municipal Corporation must issue the notices to such buildings/ structures which are having age more than 30 years. Mostly the maintenance is ignored in many structures which may cause some severe problems. Health and performance of buildings also depends on the maintenance of structure which plays a great role. Thus, Structural Audit of such type of buildings is necessary and timely maintenance /repairs also important. This will lead to prolonged life of building and safety of occupants. It also emphasizes on different repairs and retrofitting measures to be used for buildings after structural audit. Structural Audit is an overall health (strength assessment) and performance checkup of a building. It analyzes the strength and then suggests repair and retrofitting for the building to improve the service life of the structure. Enhance the life of the building by suggesting some preventive repairs. An old building with more than 15 years should be selected for structural Audit. And then the test should be performed on structure. Keywords- Structural Audit, Strength assessment, NDT, UPV Test, Rebound Hammer Test

APA, Harvard, Vancouver, ISO, and other styles

2

Laxmi, P. S., and Dr D. K. Kulkarni. "Damage Recognition in RCC Building Frame." Bonfring International Journal of Man Machine Interface 4, Special Issue (July 30, 2016): 145–50. http://dx.doi.org/10.9756/bijmmi.8172.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Zheng, Zhi, Xiaolan Pan, and Xu Bao. "Sequential Ground Motion Effects on the Behavior of a Base-Isolated RCC Building." Mathematical Problems in Engineering 2017 (2017): 1–13. http://dx.doi.org/10.1155/2017/3579713.

Full text

Abstract:

The sequential ground motion effects on the dynamic responses of reinforced concrete containment (RCC) buildings with typical isolators are studied in this paper. Although the base isolation technique is developed to guarantee the security and integrity of RCC buildings under single earthquakes, seismic behavior of base-isolated RCC buildings under sequential ground motions is deficient. Hence, an ensemble of as-recorded sequential ground motions is employed to study the effect of including aftershocks on the seismic evaluation of base-isolated RCC buildings. The results indicate that base isolation can significantly attenuate the earthquake shaking of the RCC building under not only single earthquakes but also seismic sequences. It is also found that the adverse aftershock effect on the RCC can be reduced due to the base isolation applied to the RCC. More importantly, the study indicates that disregarding aftershocks can induce significant underestimation of the isolator displacement for base-isolated RCC buildings.

APA, Harvard, Vancouver, ISO, and other styles

4

Bore, Miss Sapana, and Prof R. M. Desai. "Wind Analysis of RCC Tube in Tube Structure." International Journal for Research in Applied Science and Engineering Technology 10, no. 11 (November 30, 2022): 1691–701. http://dx.doi.org/10.22214/ijraset.2022.47703.

Full text

Abstract:

Abstract: Modern tall buildings have efficient structural systems, and utilize high-strength materials, resulting in reduced building height, and thus, become slenderer and more flexible with low damping. These flexible buildings are very sensitive to wind excitation and earthquake load causing discomfort to the building occupants. Therefore, in order to mitigate such an excitation and to improve the performance of tall buildings against wind loads and earthquake loads, the tube in tube structures and tube frame structures are the innovative and fresh concept in the tubular structures. Generally, tube in tube structures is formed by connecting peripheral frame tube and inner core tube so closely, it is not seen as a solid system but it acts like a solid surface. The total loads acting on the structures to be collectively shared between the inner and outer tubes. The tubed frames Structure are new concept for tall building. In tubed mega frames instead of one central tube several vertical tubes are carrying the lateral loads. a comparative study of tube in tube structures and tubed mega frame system with different building geometry has been done using ETABS software.

APA, Harvard, Vancouver, ISO, and other styles

5

Singhai, Karan, and A. K. Jain. "Seismic Strengthening of Existing RCC Structure by FRP Jacketing." Regular issue 10, no. 8 (June 30, 2021): 23–27. http://dx.doi.org/10.35940/ijitee.e8672.0610821.

Full text

Abstract:

India has been facing many disasters since long. Among the entire disasters earthquake is of serious concern to Civil Engineers. Because of collapse of structures subjected to seismic loads many lives were lost because these buildings were not designed for seismic loads. The problem becomes more serious when additional storeys are constructed. In these buildings many of the columns are not safe if the building is analyzed for seismic load. To make the building safe we need to adopt the technique of FRP (Fiber Reinforced Polymer) jacketing. The FRP Jacketing is comparatively better than other retrofitting because no major strengthening of foundation is required in this technique, also original function of the building can be maintained without any major change in the original geometry of the building. The present study is on a four storey building that has been planned in STAAD.ProV8i, considering M30 cement and Fe415 steel bars.

APA, Harvard, Vancouver, ISO, and other styles

6

Laddha, Vrunda R., Sharda P. Siddh, and Prashant D. Hiwas. "Analytical Investigation of Composite Structure in Comparison of RCC Structure." IOP Conference Series: Materials Science and Engineering 1197, no. 1 (November 1, 2021): 012069. http://dx.doi.org/10.1088/1757-899x/1197/1/012069.

Full text

Abstract:

Abstract High rise structures becoming very common everywhere due to scarcity of land and increasing population. Though we have RCC structure system as high-rise buildings, but in RCC buildings due to bulky size of the components of the structure self-weight will be more due to the heavy density of materials. By observing the difficulties and challenges in the field of high-rise structures engineers are using efficient structural system that is Steel Concrete Composite Structure. Composite structure consists composite deck slab, composite beam and composite column. Composite Structure complies of Concrete which is good in compression and structural steel which good in tension and composition of these material makes structure better in ductility which comparatively on higher side than RCC structure. Here G+7 high rise structure is considered for analysis by ETABS software. This paper involves Analysis of Commercial building by Equivalent static method on Composite structure and RCC structure with same plan of building and same design data. The structure is in earthquake zone III and wind speed 44m/s. Analytical comparisons of both Composite and RCC frame based on structural parameters are made with help of graphs and tables. By comparing the results, we found that Steel-Concrete Composite Structures are more desirable than RCC structures.

APA, Harvard, Vancouver, ISO, and other styles

7

Hossain, Sabbir, and S. K. Singh. "Comparative analysis of irregular RCC buildings in different zones." IOP Conference Series: Earth and Environmental Science 1110, no. 1 (February 1, 2023): 012035. http://dx.doi.org/10.1088/1755-1315/1110/1/012035.

Full text

Abstract:

Abstract The earthquake is the most devastating and unexpected natural phenomenon, causing massive damage to both human lives and infrastructure. In this study, two different irregulars Reinforced Cement Concrete (RCC) building plans of 25th story buildings with the ground floor (G+25) and 9th storey buildings with the ground floor (G+9) were subjected to four different zones making a total of eight model structures to test their ability to withstand gravity and seismic loads. The design was response spectrum method (RSM) then subjected to an earthquake load in accordance with Indian Standard (IS) 1893. The earthquake performance is evaluated on the basis of the structure’s design, serviceability, and earthquake power using an extended three-dimensional analysis of building systems (ETABS). The behaviour of building irregularities under seismic loading is investigated in this work. In this study, it has been compared the results in terms of max story displacement, max story drifts, and base shear. It was found that the model in zone 5 has maximum story displacements among all other models as well as higher max story drifts and base shears for both plans of G+9 and G+25. From the result, it was concluded that both the building models in the lower zone showed better performance in terms of max story displacement, max story drift, and base shear.

APA, Harvard, Vancouver, ISO, and other styles

8

Verma, Pankaj Kumar. "Comparative Study Seismic Analysis of RCC, Steel & Steel-Concrete Composite Frame: A Review." International Journal for Research in Applied Science and Engineering Technology 9, no. 8 (August 31, 2021): 2369–72. http://dx.doi.org/10.22214/ijraset.2021.37665.

Full text

Abstract:

Abstract: This study examines how composite structures are gaining popularity in developing countries. For medium and high levels in RCC buildings are no longer economical due to increased weight, range limitations and low natural frequencies and dangerous formwork. Steel and concrete composite structures are becoming increasingly popular today and are safe throughout their useful lives. Round Steel and concrete structures are the best solution for modern buildings. In this article we will discuss the various results of building construction for RCC, metal and composite construction taking into account different studies. Keyword: RCC Structure, Steel Structure, Composite Structure, Joint Displacement, Base Shear

APA, Harvard, Vancouver, ISO, and other styles

9

Kene, Piyush. "A Comparative Study on Analysis of a Conventional Multi-Storey Building & a Monocolumn Building." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (June 30, 2021): 3851–59. http://dx.doi.org/10.22214/ijraset.2021.35964.

Full text

Abstract:

The comparative study on analysis of RCC Frame structure supported on a single column and multi-column is done in this project. Cost comparison , Ground space comparison is done between RCC single column and RCC multi column structure .This paper presents structural modelling, stress, bending moment, shear force and displacement, deflection design considerations for a structure and it is analysed using STAAD-Pro. Various steps involved in designing of RCC Frame structure supported on a single column and multi-column by using software are Geometric Modelling, providing material properties and sectional Properties, fixing supports and boundary Conditions, providing loads & load combinations, Special Commands, Analysis Specification , Design Command and Report. The influence of plan geometry has an important role in static analysis. Maximum values of stresses, bending moments, shear forces and displacements and deflection are presented. The acting loads considered in the present analysis were dead load, Live load, floor load, and wind load. The project is to planning & analysis by using software for a multi storied building and single column building of G+3, G+7, G+15 floors. The design is done by taking in to account the requirements and standards recommended by IS code and national building rules.

APA, Harvard, Vancouver, ISO, and other styles

10

Arastu, Mohammad, and Prof Khalid Moin. "Study of Progressive Collapse of Precast Steel Reinforced Concrete Building." International Journal of Recent Technology and Engineering (IJRTE) 12, no. 1 (May 30, 2023): 81–94. http://dx.doi.org/10.35940/ijrte.a7617.0512123.

Full text

Abstract:

Progressive collapse starts when any load-carrying elements of the building collapse during extreme loading, such as earthquakes, blasts, or fire. The Precast Steel Reinforced Concrete (PSRC) buildings comprise of precast RCC columns and steel girders. These structural elements are connected to form a moment-resisting frame and are susceptible to progressive collapse. However, this structural system has the advantage of inherent stiffness and damping during lateral loads and is also known for its construction efficiency, lightweight and low cost. Earlier investigations have shown PSRC systems useful in designing and constructing buildings while maintaining ample strength and high ductility during seismic incidents. Despite much previous research, the PSRC structural system's use is limited in high seismic regions. This paper aims to study the progressive collapse of the PSRC building using non-linear dynamic analysis and U.S. General Service Administration (GSA) guidelines during extreme loading. Two structures are studied to validate the performance of progressive collapse of PSRC and RCC structures. Four-story PSRC and RCC buildings are designed according to Indian Codes of practice. Design columns under provisions of the Indian reinforced concrete structures code, and beams are designed according to the Indian steel construction code. Comparative studies of progressive collapse for the two buildings are presented.

APA, Harvard, Vancouver, ISO, and other styles

11

Prakash, Arya. "Analysis of Multi-Storied Building with Prestressed Beam using ETABS." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (June 30, 2021): 5188–94. http://dx.doi.org/10.22214/ijraset.2021.36137.

Full text

Abstract:

Concrete is good in compression and weak in tension and the steel is strong in tension. So the use of reinforced concrete to resist compression and to hold bars in position and to the steel resist tension. In India RCC structures are commonly used in residential as well as business buildings. Nowadays the Post Tensioning method is widely used due to its advantages. Post tensioning is a form of prestressing, that means the steel is stressed before the concrete has to support the service loads. In this paper is exposed to the assessment of execution of Reinforced concrete beam (RCC beam) and Post-Tensioning beam (PT beam) multistoried building structure framework with seismic load using ETABS software. And also evaluate the performance of PT beam under different seismic zone (zone I, zone II) evaluate the performance of PT beam under soil type (medium soil) and compare the performance of RCC deep beam and PT beam with multistory building system with seismic loading performance.

APA, Harvard, Vancouver, ISO, and other styles

12

Bawane, Raj M. "Time History Analysis of G+15 RCC Building at Different Earthquake Location." International Journal for Research in Applied Science and Engineering Technology 11, no. 6 (June 30, 2023): 829–34. http://dx.doi.org/10.22214/ijraset.2023.53773.

Full text

Abstract:

Abstract: Now a days multi-storey buildings is the most common word in the construction source, then study of earthquake and analysis of building using earthquake data essential for future safety. In the present paper study of nonlinear dynamic analysis of G+15 storied RCC building considering different locations is carried out and seismic responses of such building are studied. The building under consideration is modelled with the help of Staad Pro software. Three different earthquake data have been used considering at different locations for establishment of relationship between time vs acceleration graphs. The results of the study Shows similar variations pattern in Seismic responses such as base shear and storey displacements, base shear value calculate manually and compare with software value From the study it is recommended that analysis of multi storied RCC building using Time History method becomes necessary to ensure safety against earthquake force.

APA, Harvard, Vancouver, ISO, and other styles

13

Arastu, M., and K. Moin. "Seismic Analysis of Reinforced Concrete Frame Using Shake Table Test." Journal of Applied Engineering Sciences 13, no. 1 (April 1, 2023): 23–26. http://dx.doi.org/10.2478/jaes-2023-0004.

Full text

Abstract:

Abstract Recently, the reinforced cement concrete (RCC) frame has been one of the most commonly used structural systems for buildings in the high seismic region due to its inherent earthquake-resistant property. However, there is still a deficiency in understanding the RCC building structural system dynamic behaviour during significant earthquakes. A 1/4th scaled RCC framed building structure has been tested on the shake table in the present study. The response in terms of engineering parameters like natural time period, damping, story acceleration, and damage pattern have been reported. The 1940 EL-Centro (NS component) time history has been used for the study. The failure patterns were observed within the column-beam joints. The difference between the input signal and the output signal has been noted and found to be in good agreement with each other.

APA, Harvard, Vancouver, ISO, and other styles

14

Amrapali Kasabe and Vaibhav Shelar. "Pushover analysis of building using soft story at different levels." World Journal of Advanced Engineering Technology and Sciences 9, no. 1 (June 30, 2023): 203–10. http://dx.doi.org/10.30574/wjaets.2023.9.1.0160.

Full text

Abstract:

In India the enormous loss of life and property perceived in the last couple of decades, attributable to failure of structures instigated by earthquakes. Responsiveness is now being given to the assessment of the sufficiency of strength in framed RCC structures to resist solid ground motions. The seismic reaction of RCC building frame in terms of performance point and the earthquake forces on Reinforced building frame with the help of pushover analysis is carried out in this project. In this method of analysis a model of the building is exposed to a lateral load. Pushover analysis can afford a substantial insight into the weak links in seismic concert of a structure and we can know the weak zones in the structure. In this project effort has been made to investigate the effect of Shear Wall and Structural Wall on lateral displacement and Base Shear in RCC Frames. RCC Frames with G+13 are considered, one with soft storey and other with normal building in L- shape. The pushover analysis of the RCC building frame is carried out by structural analysis and design software ETABS.

APA, Harvard, Vancouver, ISO, and other styles

15

Lhamo, Namdu, Tshewang Lhendup, Cheku Dorji, and Gom Dorji. "THERMAL PERFORMANCE OF DIFFERENT BUILDING TYPOLOGIES IN THIMPHU." Journal of Applied Engineering, Technology and Management 3, no. 1 (May 30, 2023): 48–55. http://dx.doi.org/10.54417/jaetm.v3i1.109.

Full text

Abstract:

The building sector in Bhutan is responsible for 42% of total energy and consumes 242,916 TOE of thermal energy. The maximum thermal energy was used for space heating. As per the studies conducted on the energy efficiency of the buildings in Bhutan, the buildings are found to be the worst performance in terms of thermal and airtightness. Without the proper insulation, lack of choice of the building materials as per the climatic conditions and lacks of awareness in the society about the green building practices has led to poor indoor quality of life. Buildings located inthe high region are found to be uncomfortably cold during winter months.This research focuses on studying the thermal performance of different building typologies. The main findings of this research were on enhancing indoor thermal comfort and reducing heating energy demand by the incorporation of passive measures. The results were achieved by simulating the buildings in EnergyPlus software using the data collected from questionnaires and field surveys. The simulation results showed that among the investigated buildings, a concrete hollow block wall located at Kabesa has the less comfort hour of 15% at the existing condition. When passive interventions were incorporated into the building, the thermal comfort hours were achievable up to 32% with the load reduction potential of 65%.As for the traditional house with the adobe brick wall and timber wall at Changdagang, had more comfort hours than the building located at Kabesa. With the different set of passive intervention, it was found that comfort hour of 38% to 41% and load reduction of 25.9% can be achieved for the building with adobe brick wall and timber wall respectively. Whereas for stone masonry with cement mortar and RCC framed structure located at Begana and Langdru had a thermal comfort hour of more that 30%. However, RCC framed structure was reported to have huge demand for heating energy compared to stone masonry with cement mortar. The passive intervention prepared for RCC and stone masonry had the potential to achieve 41%-57% of thermal comfort hours. The results from all the investigated buildings revealed that the inclusion of passive design could improve indoor thermal comfort and can achieve a reduction in heating energy demand.

APA, Harvard, Vancouver, ISO, and other styles

16

Jadhav, Prasad J., Vikramsinh S. Tiware, Vivek V. Mane, Nitish A. Mohite, and Siddhesh Tiwale S. "Seismic Behaviour and Design of RC Shear Wall using ETABS software." International Journal for Research in Applied Science and Engineering Technology 10, no. 7 (July 31, 2022): 4679–84. http://dx.doi.org/10.22214/ijraset.2022.46047.

Full text

Abstract:

Abstract: The present paper shows seismic behavior of building under the action of earthquake load [ bhuj earthquake] by performing time history analysis. Nowadays buildings with shear walls are more popular than buildings without shear wall in earthquake prone areas due to its resistance during earthquake. In this project G+10 RCC building is considered for the structural analysis for zone III and suitable load combination. The purpose of this study is to find the prime location of shear wall and then investigate the effectiveness of best shear wall for the RCC structure. The structure is analyzed for earthquake in the type of structural system using ETABS software. Wall which is mainly designed to resist lateral forces in its own plane is called shear wall Shear wall are mainly flexural membrane which are specially designed to resist lateral forces which are caused by seismic forces and other forces. Shear wall starts from foundation level and should be continuous throughout of the building.

APA, Harvard, Vancouver, ISO, and other styles

17

Seeram, Madhuri, and Pramod Kumar. "Free Vibration Analysis of Symmetric and Asymmetric RCC Structures." IOP Conference Series: Materials Science and Engineering 1273, no. 1 (January 1, 2023): 012010. http://dx.doi.org/10.1088/1757-899x/1273/1/012010.

Full text

Abstract:

Abstract Symmetric and asymmetric structures behave differently under external loads even though they are of an equal number of stories or equal in dimensions. It is necessary to estimate the dynamic properties of the asymmetric structures carefully to avoid failure. Modal analysis for symmetric and asymmetric multi-storied reinforced concrete (RC) buildings is very essential to assess the dynamic characteristics of the structure. The plan asymmetric buildings with the shift of core from a central position to different positions and vertical asymmetry with the mass variation in vertical direction and setback stories are considered for the present study. Flexural beam elements are modelled to represent the columns. Two translations i.e., longitudinal, and transverse displacements of the building and rotation about the vertical axis of the structure are taken as global degrees of freedom at each node. The distance between the mass center and stiffness centre on each floor is taken as eccentricity. A finite element model is developed using MATLAB code to estimate the natural frequencies. Different RCC structures of 5 to 20-storied buildings are modelled by developing global stiffness and mass matrices based on the member connectivity. Eigen-value technique is used to estimate the natural frequencies. From the study it is observed that the natural period in asymmetric structures is found more than the symmetric building. The structure with setback also showed larger natural period.

APA, Harvard, Vancouver, ISO, and other styles

18

Joshi, Rishabh, and Associate Professor. "Transient Effect of Blast Loads on RCC Building." Asian Review of Civil Engineering 8, no. 1 (May 5, 2019): 9–19. http://dx.doi.org/10.51983/tarce-2019.8.1.2286.

Full text

Abstract:

The increase in the number of terrorist attacks has shown that the effect of blast loading on structures is a serious matter that should be taken into consideration in the design process. The blast pressure on the structure due to nearby explosion is of very high magnitude and very short duration. Such an impulsive loading requires dynamic time-history analysis. This paper describes the nature of explosion of explosive materials and dynamic pressure developed on the nearby structure in lieu of explosion. Initially, efforts have been made to determine the effect of 1000 kg of C4 explosive material as an equivalent weight of TNT on different surfaces of a building model at a stand-off distance of 22.5m. The intensity of blast load on each surface is analytically determined as a record of pressure time history. Further attempts have been made to determine the effect of distance of blast for the same explosive material on building surfaces at stand-off distance of 10m, 18.5m, 22.5m and 27m. The effect of different explosives, i.e., TNT, C4, RDX and PETN on building surfaces at constant stand-off distance of 22.5m has also been determined. From the analysis, it is observed that the effect of blast load on front and rear surface of the building is critical. For close range explosions, deformations on front surface are more but with increase in stand-off distance, maximum deformations occur in roof surface.

APA, Harvard, Vancouver, ISO, and other styles

19

Goel, M. D., Dhiraj Agrawal, and A. Choubey. "Collapse Behavior of RCC Building under Blast Load." Procedia Engineering 173 (2017): 1943–50. http://dx.doi.org/10.1016/j.proeng.2016.12.256.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Sunagar, Prashant, Shivaraj G. Nayak, T. G. Geethakumari, C. L. Mahesh Kumar, B. M. Kiran, and J. Sanjith. "Progressive Collapse Analysis of T shape RCC Building." IOP Conference Series: Earth and Environmental Science 1125, no. 1 (December 1, 2022): 012017. http://dx.doi.org/10.1088/1755-1315/1125/1/012017.

Full text

Abstract:

Abstract Structure collapse, on the other hand, is a very complicated phenomenon involving considerable nonlinearity and a variety of mechanical interactions. It should be thoroughly examined through experiments and numerical simulations to prevent the occurrence from occurring. When initial local failure of a small portion of the structure takes place it leads to the spread of that local damage to neighbor elements in the chain reaction manner. Finally, collapse takes place. This is known as Progressive collapse. This progressive collapse takes place when vertical load carrying members such as columns failed due to manmade or natural accidental loads. Therefore in this study progressive collapse analysis of a building is carried by removing columns. In the analysis different column removal cases are considered. As per GSA guidelines, Demand Capacity ratio(DCR) of beams are calculated. From this DCR value Evaluate the stability of the structure against progressive collapse. In the present study “T”shape building is considered which consists of 11 storey with bay sizes as 4 meter in the X and Y direction, height of every storey is 3 meters and height from the plinth to the floor is assumed 3.5 meters. The measurements of the beams are fixed throughout the storey, but column dimensions decrease as the floor rises, therefore the structure is considered to have geometrical irregularity. The loading is calculated in accordance with G.S.A guidelines. The design was created using the ETABS software and the I.S 456-2000 code. Different parameters such as Demand-capacity ratio, Dynamic factor, Interaction ratio, Axial Force, Bending moment are discussed.

APA, Harvard, Vancouver, ISO, and other styles

21

Alam, Aftab, and Mehtab Alam. "Vulnerability of Multistory RCC Framed Building with Shear Wall During Fire." Proceedings of the 12th Structural Engineering Convention, SEC 2022: Themes 1-2 1, no. 1 (December 19, 2022): 467–71. http://dx.doi.org/10.38208/acp.v1.536.

Full text

Abstract:

Fire in a building is a casual phenomenon but cannot be completely ruled out in spite of the facts that buildings are provided with mandatory fire safety measures. A symmetrical in plan with 5 bays with 20 stories regular RCC building has been considered with fire at three different level that is at the bottom, middle and top. The building has been designed for gravity loads and lateral loads having three different configuration of shear walls and columns. Fire temperature of 700 0C was considered. The minimum value of maximum fire temperature for failure of vertical members has been found out by iterations. The worst verticals members due to fire has been identified and their displacement calculated. Best location of shear walls using commercial software etabs is used for the analysis and design.

APA, Harvard, Vancouver, ISO, and other styles

22

Maharjan, Rajib, and Vivek Shrestha. "Analysis of One Bay Residential Building with Combined RCC Frame and Load Bearing Wall Structures." Journal of the Institute of Engineering 13, no. 1 (June 22, 2018): 117–24. http://dx.doi.org/10.3126/jie.v13i1.20356.

Full text

Abstract:

The major purpose of this study is to justify construction method of a hybrid structure in core area with construction complexity due unsafe excavation conditions and tries to define its rigidity and strength. Both RCC and Frame structure transfer same load to ground through foundation but the transfer mechanism varies. In some practical condition, building construction should be carried out in compact areas with unsafe adjoining building where adequate excavation for foundation cannot be carried out. In such cases, one bay hybrid structure is proposed for construction with combined RCC frame structure and load bearing walls. In these combined cases, both structures works as same unit to transfer building load but the transfer pattern varies. The variable load transfer pattern is due to discontinuity in structural system which also effect on seismic response of the building. The placement of a masonry load bearing structure in RCC frame structure varies design of all structural components of the building. To study actual behavior of hybrid structure in various load condition and introducing cost minimization techniques of buildings structural analysis was carried using ETABS 2016 with composite structural arrangement and with induction of load bearing wall as structural component. By which seismic behavior of building in both cases was obtained as well as reduction in rebar percentage and dimensional reduction of structural components can be achieved.Journal of the Institute of Engineering, 2017, 13(1): 117-124

APA, Harvard, Vancouver, ISO, and other styles

23

Kumar, Ankit. "Dynamic Analysis on RCC and Composite Structure for Uniform and Optimized Section." International Journal for Research in Applied Science and Engineering Technology 9, no. 12 (December 31, 2021): 1114–27. http://dx.doi.org/10.22214/ijraset.2021.39503.

Full text

Abstract:

Abstract: This study examines the composite structure that is increasing commonly in developing countries. For medium-rise to high-rise building construction, RCC structures is no longer economical due to heavy dead weight, limited span, low natural frequency and hazardous formwork. The majority of commercial buildings are designed and constructed with reinforced concrete, which largely depends on the existence of the constituent materials as well as the quality of the necessary construction skills, and including the usefulness of design standards. Conventional RCC structure is not preferred nowadays for high rise structure. However, composite construction, is a recent development in the construction industry. Concrete-steel composite structures are now very popular due to some outstanding advantages over conventional concrete and steel structures. In the present work, RCC and steel-concrete composite structure are being considered for a Dynamic analysis of a G+25-storey commercial building of uniform and optimized section, located at in seismic zone IV. Response Spectrum analysis method is used to analyze RCC and composite structure, CSI ETABS v19 software is used and various results are compared such as time period, maximum storey displacement, maximum storey stiffness. Maximum storey shear and maximum stoey overturning moment. Keywords: RCC Structure, Composite Structure, Uniform Section, Optimized Section, Shear Connector, Time Period, Storey Displacement, Storey Shear, Storey Stiffness, Response Spectrum method, ETABS

APA, Harvard, Vancouver, ISO, and other styles

24

Gond, AbhishekKumar, and S. K. Madan. "Nonlinear Static Analysis of Core Wall RCC Framed Buildings." Proceedings of the 12th Structural Engineering Convention, SEC 2022: Themes 1-2 1, no. 1 (December 19, 2022): 1397–402. http://dx.doi.org/10.38208/acp.v1.669.

Full text

Abstract:

RCC framed buildings mainly consists of shear walls and columns for resisting lateral force due to earthquakes. In most of the framed buildings shear walls are provided in the outer frames. In addition to shear walls provided in the outer frames, RCC lift -well (core wall) is also provided in the inner core of the buildings to accommodate lift. Core wall also acts as shear wall contributing to the lateral resistance to the buildings. In the present study, nonlinear static analysis is performed to study the behaviour of high rise RCC buildings, the buildings have a centralised lift core wall with a door opening and shear walls in outer frames. The flange of core wall is joined together at regular interval by floor and slabs and connecting beams to provide proper connection in between flange. This Residential G+14 RCC framed building is lying in seismic zone 4 and analysed as per guidelines of is 1893 (part 1) 2016 and ETABS 17.0.1. Responses namely lateral loads, story drift, base shear, story displacement and the formation of plastic hinges compared for two types of buildings, namely with core wall and without core wall to understand the effect of core wall against the lateral loads.

APA, Harvard, Vancouver, ISO, and other styles

25

Goyal, Ankur M. "Rehabilitation of RCC Frame Building: Case Study of School Building AT Bhimora." International Journal for Research in Applied Science and Engineering Technology 6, no. 4 (April 30, 2018): 2283–89. http://dx.doi.org/10.22214/ijraset.2018.4390.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Raju, Y. Kamala, G. V. V. Satyanarayana, and G. Arun Sai. "RCC Highrised Residential Buildings its Influence on Earthquake Loads." E3S Web of Conferences 184 (2020): 01107. http://dx.doi.org/10.1051/e3sconf/202018401107.

Full text

Abstract:

The present decade, high rise multi-storey buildings are subjected to many external effects such as earthquake, wind loads, tidal loads, etc., in most cases high rise buildings have more vulnerable to earthquake and wind loads. Most of the reinforced concrete multi-storeyed frame buildings were heavily damaged and many of them completely collapsed during due earthquakes. RC frame buildings were severely damaged due to various deficiencies when proper codal provisions are not designed. A study is need to study the behaviour of the RC framed structure under earthquake load to reduce the damage caused by earthquake forces In this investigation a RC framed building of G+20 storeyed is considered in several seismic zones under different soils as per Indian Standard code IS 1893(part1):2016, using STAAD. Pro V8i as software tool. Finally evaluate the ultimate Base shear using Equivalent static method and Response spectrum method addressing under design forces.

APA, Harvard, Vancouver, ISO, and other styles

27

Burman, Aditya kumar. "Transient Effect of Random Loads on Reinforced Cement Concrete Building on RCC Building with Staad Pro. V8i." ECS Transactions 107, no. 1 (April 24, 2022): 15573–85. http://dx.doi.org/10.1149/10701.15573ecst.

Full text

Abstract:

Abstract. Dynamic load is one which changes with time quickly in comparison to the structure's natural frequency. If it varies quickly, the activity must be determined with a dynamic analysis. Explosive loads and impact loads are transients, or loads that are applied dynamically as one-half cycle of high amplitude. This transient load is applied only for a specific and typically short period of time in the case of blast loads typically less than one-tenth of a second. The response of the engineering structural building due to the reason of periodic load RCC building structure has been severely damaged, collapse and develop cracks. Bomb blast is the best example for impulsive load. To determine the response of a G+3 RCC building model in STAAD Pro subjected to triangular, rectangular and sinusoidal impulsive force for 0.5 seconds with maximum magnitude of 100kN. Effect of such loads on front, roof and side portion of the building studied. Observe that the critical deformations obtained on the front and roof portion of building. Effect of deformation along height of building was parabolic in nature with maximum deflection at top floor of building. It was also noted i.e sufficient reinforcement should be provided in beam, columns and slabs to impart ductility to the building against impulse loads.There is more demand for construction of high buildings due to increasing urbanization and population.

APA, Harvard, Vancouver, ISO, and other styles

28

Vandit, Bhatt. "Pushover Analysis of RCC Set Back Building using SAP2000." International Journal for Research in Applied Science and Engineering Technology 7, no. 11 (November 30, 2019): 305–10. http://dx.doi.org/10.22214/ijraset.2019.11048.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Pandey, Mr Suryakant. "Seismic Analysis of L-Shape Multi-Storey RCC Building with X-Bracing in Different Effective Location and Pattern." International Journal for Research in Applied Science and Engineering Technology 9, no. 8 (August 31, 2021): 1150–70. http://dx.doi.org/10.22214/ijraset.2021.37530.

Full text

Abstract:

Abstract: In this day and age of urbanization, there is a strong need for a large-scale high-rise apartment building in every city but high-rise construction systems are extremely difficult to construct in any seismic region due to the intense and disruptive nature of seismic forces. Seismic forces have the highest risk of causing the most harm to high-rise buildings. To meet this need, the Civil Engineering industry is constantly developing new groundbreaking techniques. To solve this problem RCC or steel bracings are provided in high-rise buildings which help to the low down the effect of seismic and wind forces. The main objective of this paper is to locate an effective position and pattern of the RCC X-bracing system in the L- shape multi-storey building which is subjected to seismic forces. According to a previous reference paper, X-bracing produces better results than other bracing systems. Analysis the seven types of frame models are taken – (1) Normal L-shape building without bracing, (2) Xbracing are provided at the face of L-shape building, (3) X-bracing are provided alternative pattern at the face of L-shape building from bottom to top floor, (4) X- bracing are provided zig-zag pattern at the face of L-shape building, (5) X-bracing are provided at the corner of L-shape building, (6) X-bracing are provided alternative pattern at the corner of L-shape building from bottom to the top floor, (7) X-bracing are provided zig-zag pattern at the corner of L-shape building. Developed and evaluated by response spectrum analysis method (Linear dynamic analysis) as per IS 1893-2000 using STAAD PRO V8i. In the present work G+12 storey, the L-shape frame structure is analyzed by using X-bracing. It is analyzed and the results of the Following Parameters are taken - (1) Peak storey shear, (2) Base shear, (3) Nodal displacement, (4) Maximum bending moment, (5) Total quantity of steel in the whole structure, (6) Total volume of concrete in the whole structure are evaluated and compared. Keywords: RCC Bracing, Seismic Behavior, Seismic Analysis, Peak Storey Shear, Base shear, Nodal Displacements, Maximum Bending Moment, The Total Quantity of Steel, The Total Volume of Concrete

APA, Harvard, Vancouver, ISO, and other styles

30

Nimgade, Miss Kajal Sainath, Prof Dr Nina R. Dhamge, and PE Diwakar Kumar. "Feasibility Analysis of Post-Tensioned Beam for Industrial Building: A Review." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (April 30, 2022): 1957–64. http://dx.doi.org/10.22214/ijraset.2022.41680.

Full text

Abstract:

Abstract: In recent years, due to corrosion and the constant demand for increased traffic flow, there is an eagerly need for an efficient system that can be used to repair or strengthen bridges and structures with steel-concrete composite sections. There have been so many strengthening techniques used to prevent such serious structural problems. One of these most useful techniques, which has successfully proven effective in repairing and strengthening structural members, is to use the externally post-tensioned tendons technique. The various study has also provided a recently completed experimental program on scaled bridge composite steel and concrete beams strengthened with external post-tensioning tendons to explore the fundamental cyclic loading behavior. This article summarizes the design of Post-Tensioned Beam for industrial building and a comparative study between PT Beam and RCC Beam based on a literature survey. We are analyzing such structure in our research having a large span. Manual design of PT Beam for three different span lengths without any intermediate supports and manual design of RCC Beam. We are doing a comparative study of PT Beam and RCC Beam based on the results. This report is based on a study of PT Beam that will aid future research and advances in the construction industry. Keywords: Post-Tensioning Beam, RCC Beam, Industrial Building

APA, Harvard, Vancouver, ISO, and other styles

31

Humnabad, Azharuddin. "Structural Audit and Retrofitting of RCC Structure." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (July 15, 2021): 841–45. http://dx.doi.org/10.22214/ijraset.2021.36494.

Full text

Abstract:

Civil Engineering Industry is one of the oldest industries which provide a basic infrastructure to all the human beings. Structures can be any kind it can be Historical, Heritage Structure, Residential building, Commercial building or an Industrial building. Every structure has its own service life, and within this service life it should stand firmly on its position. Ex- A Taj Mahal in Agra in India which is one of the oldest structures and a Wonders of the World, and still stand on its position very efficiently. But this not a condition about the today’s Structures. A collapsed mechanism has increased and today’s Structures are getting collapsed before there service life is completed. Therefore, it is advisable to monitor it periodically by taking a professional opinion. Structural Audit is a preliminary technical survey of a building to assess its general health as a civil engineering structure. It is usually initiated as the first step for repair. In this Project a Root Cause of a faulty mechanism of structure and a preventive measure to overcome a failure of this structures. The construction material mainly reinforced concrete is being used extensively for various types of construction projects. However, the deterioration of Reinforced Concrete structures is recognized as a major problem worldwide. Apart from requiring regular maintenance, many structures require extensive Repair, Rehabilitation & Retrofitting. Over a period of time, as these structures become older, we find in them certain degradation or deterioration with resultant distress manifested in the form of cracking, splitting, delaminating, corrosion etc. Such deteriorated structures can be rehabilitated and retrofitted by using various types of admixtures & modern repair materials. The paper brings out the present state of concrete structures & the major areas where improvement is needed during its service life stage for sustainable development & also the method of carrying out Repair, Rehabilitation &Retrofitting. This has been brought in details in the paper along with Case studies, where the Author of the paper was directly involved in planning and execution of the job.

APA, Harvard, Vancouver, ISO, and other styles

32

V, Indrani, Shubha D. K, and Lavina E. J. "Dynamic Analysis of Multistory RCC Building Frame with Flat Slab and Grid Slab." International Journal of Trend in Scientific Research and Development Volume-2, Issue-4 (June 30, 2018): 1143–48. http://dx.doi.org/10.31142/ijtsrd14269.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Tomer, Sahil, and Mohit Bhandari. "Evaluation of Seismic Response of Irregular Buildings Subjected to Near-Field Earthquakes." Proceedings of the 12th Structural Engineering Convention, SEC 2022: Themes 1-2 1, no. 1 (December 19, 2022): 975–82. http://dx.doi.org/10.38208/acp.v1.609.

Full text

Abstract:

This study deals with the evaluation of the seismic performance of irregular buildings by comparing various seismic responses of six types of building, namely regular building, setback building, stepped building, mass irregular building, stiffness irregular building, and building with floating columns which are constructed of Reinforced Cement Concrete (RCC) subjected to extreme earthquake loads. The nonlinear time history analysis (NTHA) method is carried out to obtain different seismic response parameters for all considered irregular and regular buildings. The structural response results are compared by applying real earthquake records of different near-field and Far-field earthquakes and were compared for four different seismic response parameters which include top storey displacement, inter-storey drift, top base shear, and pattern of plastic hinges formation. This research concludes that the storey displacement, storey drift, and top base shear is significantly less for stepped and setback buildings, and significantly high for mass irregular, stiffness irregular, and floating columns buildings as compared to a regular building. Stepped buildings yield less responses and high responses are yielded in the building with floating columns.

APA, Harvard, Vancouver, ISO, and other styles

34

Rana, UpasanaR, SnehalV Mevada, and VishalB Patel. "Seismic Risk Assessment of Asymmetric Buildings using Fragility Curves." Proceedings of the 12th Structural Engineering Convention, SEC 2022: Themes 1-2 1, no. 1 (December 19, 2022): 1727–39. http://dx.doi.org/10.38208/acp.v1.712.

Full text

Abstract:

It is very important and necessary to assess the seismic risk for the buildings subjected to uncertain and highly unpredictable dynamic forces produced from earthquakes. Fragility curves are the best tools for the representation of seismic risk assessment. In the present study, risk assessment of structure subjected to seismic loading is evaluated. Further, the effects of different eccentricities are also studied for seismic risk assessment. The fragility curves are developed for G+5 storied RCC bare frame building as well as G+5 storied RCC building with shear wall. The considered buildings are subjected to ground motions of past recorded earthquakes. Buildings with different eccentricities and various structural configurations are studied for various failure criteria. The responses of the considered buildings subjected to earthquake excitations are evaluated by Incremental Dynamic Analyses. Fragility curves are developed using Monte Carlo method considering various performance levels as per ATC-40. It is observed that for immediate occupancy failure criteria, the probability of failure is increased constantly with increasing the percentage of structural eccentricity. Further, it is observed that very less variation is observed in the probability of failure under life safety and collapse prevention failure stages.

APA, Harvard, Vancouver, ISO, and other styles

35

Sushma, C. K., and Akella Vijayalakshmi. "Study of the effect of global and local ductility on high - rise RCC building in high seismic zone." i-manager’s Journal on Civil Engineering 13, no. 1 (2023): 18. http://dx.doi.org/10.26634/jce.13.1.19332.

Full text

Abstract:

Numerous studies have been conducted on high-rise buildings, focusing on various aspects such as construction methods, building materials, and responses to seismic and wind pressures. In this paper, the influence of plan aspect ratio on the behavior of high-rise buildings is examined in detail. According to IS 16700:2017, the plan aspect ratio is limited to 5. However, in this study, the plan aspect ratio has been studied up to 6, and the behavior of high-rise buildings under seismic forces has been investigated. The building model has been constructed in three sets, each with varying heights. Building heights of 10, 20, and 30 stories have been selected for each group of buildings, respectively. For each set, seismic metrics, including ductility, stiffness, and base shear, have been compared, and conclusions have been drawn.

APA, Harvard, Vancouver, ISO, and other styles

36

Reshi, Sameer Ahmad, and Bharmjeet Singh. "A Study on Seismic Response of RCC Buildings on Hill Slopes Using STAAD.Pro." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (April 30, 2022): 2909–20. http://dx.doi.org/10.22214/ijraset.2022.41932.

Full text

Abstract:

Abstract: The majority of India's hilly regions are prone to earthquakes. A building on a steep slope is distinct from other structures. That is to say, structures that are to be constructed on hilly terrain have a higher risk factor of falling prey to seismic activities as compared to their counterparts built on a rather plainer terrain. The numerous floors/storeys of such a structure step back towards the hill slope, and buildings may also have setbacks. As such, the column of a hill structure sits at different heights on the angle of the terrain; its analysis differs from that of buildings on level ground. The current study looked at G+3 and G+4 structures with different slope angles, such as 00 , 7.50 , 150 , 22.50 , and 300 . Both Step back and Step back & set back types of building configurations have been studied in this paper. The earthquake forces are calculated according to IS: 18932002; the structures are situated in seismic zone IV, with a damping ratio of 5%. Linear Static and Linear Dynamic methods were employed to conduct the seismic study. To investigate the influence of shifting column heights in the ground level due to sloping ground, a 3-dimensional analytical model of building plan was created and the same was studied using the structural analysis application "STAAD.Pro." To quantify the effects of diverse sloping terrain, response parameters like top storey displacement, base shear, shear in bottom storey column, and time period were thoroughly studied. It has been discovered that short columns on the elevated side of the terrain/slope experience a greater shear force as compared to columns of increased height on the lower side of the terrain. Under earthquake stresses, Step back & Setback structures showed better resilience to seismic forces as compared to Step back buildings. Step back setback buildings have substantially lower base shear and top floor displacement than setback buildings on sloping land. Keywords: Earthquake, Slope, STAAD.Pro, Step back, Step back & set back

APA, Harvard, Vancouver, ISO, and other styles

37

Khan, Mohammed Mohiuddin, Mohammed Furqan Ali Khan, Khaja Karim Karinuddin, and K. Sai Charan. "Comparative Study of Linear Static and Linear Dynamic Method of Seismic Analysis of RCC Multistoried Building Using ETABS." International Journal for Research in Applied Science and Engineering Technology 10, no. 5 (May 31, 2022): 735–44. http://dx.doi.org/10.22214/ijraset.2022.42322.

Full text

Abstract:

Abstract: As the modern buildings have been getting taller and narrower than before, the structural engineers have to perform both static and dynamic analysis for seismic loads that may affect on structures in order to make sure of the safety verifications and the optimal design requirements. Reinforced concrete (RC) building frames are the most common types of constructions in urban India. Throughout their lifetime, these are subjected to various types of forces such as static forces due to dead loads, live loads and dynamic forces due to earthquakes. In the present study, one tall RCC building of 10 stories is assumed to be situated in seismic zone 4 is analyzed using two different methods i.e., Equivalent static method (static) and response spectrum method (dynamic), using ETABS software. From analysis, the parameters like storey displacement, storey drift, base shear and time period and frequency are determined and also comparative study is done for both the methods Keywords: {RCC Buildings, Equivalent static method, response spectrum method, storey displacement, storey drift, Base shear, time period.}

APA, Harvard, Vancouver, ISO, and other styles

38

Kadu, Amruta. "Seismic Analysis of RCC and Steel Building on Sloping Ground." International Journal for Research in Applied Science and Engineering Technology 9, no. VII (July 20, 2021): 1753–62. http://dx.doi.org/10.22214/ijraset.2021.36732.

Full text

Abstract:

It is necessary to design and analyse a structure to perform well under seismic loads and also endow with well strength, stability and ductility for seismic design. The seismic performance of high rise steel frame and RCC frame structure is analysed by equivalent static method. The advancement in building, Information, modelling has integrated design, detailing, and fabrication of steel which will result in high performance under earthquake loading. In present work various models were analysed with the help of Staad pro. And the results so obtained were plotted and compared.

APA, Harvard, Vancouver, ISO, and other styles

39

Y. Mithbhakare, Nikhil, and Popat D. Kumbhar. "ANALYSIS OF HIGH-RISE BUILDING USING RCC VIRTUAL OUTRIGGER SYSTEM." International Journal of Engineering Applied Sciences and Technology 5, no. 7 (November 1, 2020): 113–17. http://dx.doi.org/10.33564/ijeast.2020.v05i07.017.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Shinde, Dhaval H., and Sunil M. Rangari. "PERFORMANCE EVALUATION OF RCC BUILDING BY CHANGING THE DESIGN PARAMETERS." International Journal of Engineering Applied Sciences and Technology 04, no. 04 (August 31, 2019): 226–34. http://dx.doi.org/10.33564/ijeast.2019.v04i04.038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Kale, Mrudula M., and Sunil M. Rangari. "ANALYSIS OF RCC BUILDING FOR MULTIPLE LEVELS OF SEISMIC ISOLATION." International Journal of Engineering Applied Sciences and Technology 04, no. 04 (August 31, 2019): 235–41. http://dx.doi.org/10.33564/ijeast.2019.v04i04.039.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Dod, Ankush. "Comparative Analysis of RCC and Steel Building Using STAAD Pro." International Journal for Research in Applied Science and Engineering Technology 8, no. 5 (May 31, 2020): 1291–99. http://dx.doi.org/10.22214/ijraset.2020.5207.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Jain, Umang, and Dr J. N. Vyas. "Wind Analysis of Pre Engineered Building." International Journal for Research in Applied Science and Engineering Technology 10, no. 11 (November 30, 2022): 1974–81. http://dx.doi.org/10.22214/ijraset.2022.47722.

Full text

Abstract:

Abstract: With the development of science and technology in the field of structural engineering, it is possible to adopt preengineered buildings in both industrial and residential construction sectors. For important buildings it is more suitable to use pre engineered building as these are more safe and take less time in construction in comparison of RCC structures. The main objective of this paper is pre-engineered steel structure will be design and analyzed for wind loads, dead loads, live loads and different load combinations on structure. The pre-engineered construction concept involves pre-engineering and quality construction systems which will help to minimize the cost and time.

APA, Harvard, Vancouver, ISO, and other styles

44

Holden, Libby, Susan Pager, Xanthe Golenko, and Robert S. Ware. "Validation of the research capacity and culture (RCC) tool: measuring RCC at individual, team and organisation levels." Australian Journal of Primary Health 18, no. 1 (2012): 62. http://dx.doi.org/10.1071/py10081.

Full text

Abstract:

Research capacity building (RCB) in Australia has recently focussed on strategies that take a whole of system approach to developing research culture at individual, team and organisation levels. Although a theoretical framework exists, no tool has been published that quantitatively measures the effectiveness of RCB interventions aimed at these three levels. A sample of 134 allied health workers was used to validate the research capacity and culture (RCC) tool. Item level analysis was undertaken using Cronbach’s α and exploratory factor analysis, and test–retest reliability was examined using intra-class correlations (ICC). The tool had one factor emerge for each domain, with excellent internal consistency for organisation, team and individual domains (α = 0.95, 0.96 and 0.96 respectively; and factor loadings ranges of 0.58–0.89, 0.65–0.89 and 0.59–0.93 respectively). The overall mean score (total) for each domain was: 5.4 (inter-quartile range 3.9–7.7), 4.4 (IQR 2.6–6.1) and 3.9 (IQR 2.9–6) for the organisation, team and individual domains respectively. Test–retest reliability was strong for each domain: organisation ICC = 0.77, team ICC = 0.83 and individual ICC = 0.82. The RCC tool has three domains measuring research capacity and culture at organisation, team and individual levels. It demonstrates excellent internal consistency and strong test–retest reliability.

APA, Harvard, Vancouver, ISO, and other styles

45

Zaman, Athar, Faiza Khalid, and Majid Ali. "Provisions of Sustainability in Structural Design Approaches in Different Codes." Key Engineering Materials 896 (August 10, 2021): 149–55. http://dx.doi.org/10.4028/www.scientific.net/kem.896.149.

Full text

Abstract:

Concrete has changed the norms in the Construction industry, it has modified the thinking and possibilities of the general public. Particularly, Reinforced Cement Concrete (RCC) is being used throughout the world; whether it be tall sky scrapers in the Middle East, or the vast buildings in Central Europe, RCC has altered the construction Industry. But then again, RCC has its fair share of shortcomings, in recent times it has been recorded that RCC structures collapse due to brittle failure. Seismic loading, mainly from earthquakes are mostly responsible for structure failure as seismic waves generally lead towards overloading and ultimately the structure fails. Cement is generally an energy releasing material and it releases immense amount of CO2 emissions into the earth’s atmosphere, causing the ozone layer to deplete. Hence to minimize this impact and to provide a sustainable solution and to minimize the accidents different sustainable houses are being provided to the people. By doing this, we can reuse existing building assets to minimize the waste and to reduce the pollution. In 2011, International Organization launched the Life cycle Sustainability assessment to have a more sustainable approach towards construction by using different techniques. Life cycle sustainability assessment is a suitable too used for environmental performance of buildings. In this paper we will look to observe different provisions of sustainability in different structural designs taking different codes as a reference.

APA, Harvard, Vancouver, ISO, and other styles

46

Raikar, Pavankumar, and M. B. Mogali. "Comparative Study of Seismic Analysis of RCC and Composite Building with Asymmetry in Plan." Bonfring International Journal of Man Machine Interface 4, Special Issue (July 30, 2016): 182–86. http://dx.doi.org/10.9756/bijmmi.8179.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Bage, Bayi. "Seismic and Wind Analysis of RCC Building with Different Shape of Shear Wall and Without Shear Wall." International Journal for Research in Applied Science and Engineering Technology 10, no. 1 (January 31, 2022): 678–83. http://dx.doi.org/10.22214/ijraset.2022.39468.

Full text

Abstract:

Abstract: ETABS Stand for Extended Three-Dimensional Analysis of Building systems. ETABS integrates every aspect of the engineering design process. In the present situations of construction industry, the buildings that are being constructed are gaining significance, in general those with the best possible outcomes which are referred to members like beams and columns in multi storeys R.C structures. This paper deals with the seismic analysis of regular B+G+26 story building with shear wall and G+B+10 Story building with different irregular shapes considering different shapes of shear wall at different locations has been carried out. Which can be done in ETABS taking all the considerations regarding codes and other factors into account. All the buildings were analyzed with the same method as stated in IS 1893-Part-1:2016. The effect of shear walls on lateral capacity of the building are examined because the seismic analysis of a frame depends upon the location and symmetry of shear wall. Present study shows the shear wall improves not only the lateral stiffness and strength capacity but also the displacement capacity of structure. Comparison of results been done of different models by comparing the parameters such as story drift, story displacement, story stiffness and base reaction. Therefore, as far as possible irregularities in a building must be avoided. But, if irregularities have to be introduced for any reason, they must be designed properly following the conditions of IS 13920:1993. The complex shaped buildings are now days getting popular, but they carry a risk of sustaining damages during earthquakes. Keywords ETABS Software; IS Code 1892-Part-1:2016; IS Code 13920:1993; IS Code 875-Part-1 and Part-2

APA, Harvard, Vancouver, ISO, and other styles

48

Maske, Prof Ravi G., Prof Ashok Y. Kankuntla, Prof Shrikant R. Kulkarni, Sajid D. Tamboli, Venu M. Rapelli, and Unsa Z. Jahagirdar. "3D Modelling and Simulation Methods in RCC Building using Bim Software." International Journal of Innovative Technology and Exploring Engineering 12, no. 8 (July 30, 2023): 39–45. http://dx.doi.org/10.35940/ijitee.h9662.0712823.

Full text

Abstract:

The building can be designed by using Autodesk Revit Software. Autodesk Revit is Building Information Modelling (BIM) software for, landscape architects, structural engineers, MEP engineers and contractors. The software allows users to design a building and its components in 3D annotate the model with 2D drafting elements and access building information from the building model’s database. Our structure are G+14 Residential building and LIC Ludhiana projects. G+14 is the residential project in which there are 10 blocks with 2 basement, shops on ground and 1st floor, and typical floors from 3rd to 13th floor level which also consist of two refuges floor, the project has different AutoCAD plan of architectural and structural layout having sizes of Beam, column, slabs designed according to IS456:2000 and IS800:2007 LSM. In LIC Ludhiana project the work consist of Rebaring of slabs which includes the top and bottom rebar’s of slab having different diameter or sizes of rebar’s like 8mm, 10mm, 12mm etc. The schedule can be easily extract from this Revit models which will calculate the quantity of material required for the construction purposes. The extensions or plugins like Diroots, Dynamo run in Revit reduces the time of project and give more accuracy to provide id’s to the elements.

APA, Harvard, Vancouver, ISO, and other styles

49

Meghana, H., and C. S. Vijaya Kumar. "Comparative Analysis of Regular and Horizontal Irregular Building on Sloping Ground with Shear Wall and Bracings as Structural Elements using ETABS." International Journal of Innovative Research in Science,Engineering and Technology 11, no. 09 (June 30, 2022): 12278–85. http://dx.doi.org/10.15680/ijirset.2022.1109098.

Full text

Abstract:

Due to rapid urbanization and economic growth there is huge demand for construction of building. Since population density is high it led to construction of buildings on sloping ground, but this sloping grounds like hilly areas are more prone to earthquake which causes severe damage of life and property. The buildings constructed on hilly areas are different from buildings constructed on flat ground buildings on hilly areas have horizontal/plan, vertical, torsional, mass and many more irregularity. The structure irregularities are considered as one of the main fundamentals of its failure. Here we have done seismic analysis of a G+9 regular RCC building, C and I shape building of floor height 3m resting on sloping ground of horizontal angle of inclination 45o on zone II, Response spectrum analysis is done for three cases that is plain building and building with shear wall and bracings for all the three buildings, after analysis the response of the structures with respect to variation in the story drift, story displacement, base shear, story shear has been recorded and will be discussed and concluded.

APA, Harvard, Vancouver, ISO, and other styles

50

Sakhare, Vishakha V., and Rahul V. Ralegaonkar. "Strategy to control indoor temperature for redevelopment of slum dwellings." Indoor and Built Environment 27, no. 9 (May 30, 2017): 1203–15. http://dx.doi.org/10.1177/1420326x17712107.

Full text

Abstract:

The present paper focuses on developing a strategy to control the indoor temperature in slum dwellings under redevelopment. The proposed framework aims at improving the building planning and appropriate selection of construction materials along with controlled cost with respect to currently adopted practices. The proposed strategy is elaborated with a case study in Nagpur, India. A single storey, four-room model was planned as per the National Building Code of India. The performance of the model building was evaluated by using energy simulation software TRNSYS. The cellular light-weight bricks used in the construction were made with bio briquette ash (BBA), which is a locally available waste material. Instead of using the conventional reinforced cement concrete (RCC) roof, aluminium and sawdust were suggested as a reflecting-cum-insulating material. To improve the temperature control in model homes, installation of a reflecting-cum-insulating material was conducted, consisting of aluminium and sawdust, over the conventional RCC roof. The model building constructed with these new materials was compared with that built with conventional fly ash bricks and RCC roof. Results show that the proposed model building improved the efficiency of indoor temperature control by 23% and, at the same time, reduced the cost by 13%. The present concept will contribute to the redevelopment of slum dwellings to deliver cost-effective dwelling units that provide occupants with acceptable thermal comfort.

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'RCC BUILDING'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles