Dissertations / Theses on the topic 'Rapid configuration'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 17 dissertations / theses for your research on the topic 'Rapid configuration.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
de, la Riva Diego Horacio. "Turbulence Interaction in a Highly Sataggered Cascade-Propulsor Configuration." Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/31963.
Full textMaster of Science
Balaba, Davis. "A methodology for rapid vehicle scaling and configuration space exploration." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/28234.
Full textCommittee Chair: Dr. Dimitri Mavris; Committee Member: Dean Ward; Committee Member: Dr. Daniel Schrage; Committee Member: Dr. Danielle Soban; Committee Member: Dr. Sriram Rallabhandi; Committee Member: Mathias Emeneth.
Crockett, Sterling J. (Sterling John) 1976. "Rapid configuration of discourse and dialog management in conversational systems." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/16839.
Full textIncludes bibliographical references (p. 70).
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
by Sterling J. Crockett.
M.Eng.
Joshi, Jaimini. "A System for Rapid Configuration of Distributed Workflows over Web Services and their Handheld-Based Coordination." Digital Archive @ GSU, 2006. http://digitalarchive.gsu.edu/cs_theses/18.
Full textSilva, Rodrigo Soares Garcia da. "Concepção e avaliação do desempenho de um reator anaeróbio de manta de lodo dotado de agitação com jatos e decantador de alta taxa tratando esgoto sanitário." Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/18/18138/tde-23062015-101348/.
Full textIn spite of reactors with the original design of UASB are successfully used in many wastewater treatment plants, some issues regarding the operation, construction and maintenance of these reactors still prevail. Thus, new configurations based on the traditional conception of sludge blanket reactors may signify new tries to solve these issues. In this context, this research proposes a new configuration, using sludge blanket, mainly aiming at the elimination of the three-phase separators and adoption of a mixture through jets in order to simplify distribution / mixing of the influent. Therefore firstly a bench scale study was conducted to determine the required average velocity gradient for suspension of solids, resulting in favorable values up to 20 s-1. In the second phase, a 2.69 m3 pilot plant was built in acrylic to study the characteristics of the jet and the nozzles, and the resulting mixing state. After this stage, and with the contribution of information obtained in the earlier stages, a traditional pilotscale UASB reactor of 20.8 m3 was adapted for the implementation of this new treatment system: the systems for gas collection and distribution of background were removed, and a high-rate sedimentation unit and intermittently feed through jets were introduced. In essence, the new system has been divided into two distinct zones: one for reactions and other provided of laminar decantation to remove suspended solids. In the reaction zone the entry of sewage was given through jet for mixing the sludge blanket. The mixing energy was provided by jet stemmed on an elevated tank, where the sewer was accumulated. The jet range and entry velocity into the reactor could be determined, noting that the number of entry points in the reactor can be reduced (relative to the number of points traditionally recommended: 2 to 4 m2 per point). The velocity gradient applied during each jet (with a 30 seconds duration) was 16.6 s-1. The pilot-scale reactor (third phase), in stable-phase operation, got a removal efficiency of 52.79%, 70.90% and 47.00% for COD, BOD and TSS, respectively. Additionally, were evaluated the use of unique coating rapid sand filter to the post-treatment of the effluent in the anaerobic reactor. The removals obtained for COD, TSS and Turbidity (for application rate of 100 m3.m-2.dia-1) were 54.94%, 84.44% and 81.71% respectively. It was concluded, therefore, the viability of the sludge blanket reactor operation with intermittent feed and without threephase separator system installation.
Gasti, Wahida. "Etude et realisation d'un processeur rapide de transformations geometriques d'images numeriques." Université Louis Pasteur (Strasbourg) (1971-2008), 1986. http://www.theses.fr/1986STR13131.
Full textIbrahim, Roger. "Amplificateurs optiques à stabilisation de gain rapide : étude et proposition de configurations WDM hybrides EDFA-SOA." Evry, Institut national des télécommunications, 2008. http://www.theses.fr/2008TELE0001.
Full textFanton, Hervé. "Cartographie rapide de l'environnement local d'un robot mobile autonome." Grenoble INPG, 1989. http://www.theses.fr/1989INPG0130.
Full textDescombes, Catherine. "Traitement des contacts avec frottement dans un logiciel explicite 3D de dynamique rapide : modèles numériques en configuration élastoplastique 1D." Bordeaux 1, 1997. http://www.theses.fr/1997BOR10629.
Full textКлименко, Ірина Анатоліївна. "Методи та засоби підвищення ефективності обробки інформації в реконфігуровних комп’ютерних системах на базі ПЛІС." Doctoral thesis, Київ, 2017. https://ela.kpi.ua/handle/123456789/19095.
Full textStadler, Marine. "Etude expérimentale du mouvement hydrodynamique d'un bain métallique et de sa production de vapeurs sur une configuration de soudage TIG." Thesis, Toulouse 3, 2016. http://www.theses.fr/2016TOU30019/document.
Full textTIG (Tungsten Inert Gas) welding process is achieved by the creation of an electric arc between a tungsten cathode and a piece of metal. This process uses a shielding gas as argon, helium or mixtures at atmospheric pressure. The heat transfer between the arc and the work piece leads to a metallic weld pool and metallic vapours production. Weld quality is related to the plasma behavior and the molten zone motion (Marangoni force, Laplace force, drag force and gravity...).during the process. The aim of this work is to develop diagnostic methods leading to a better understanding of mechanisms involved in heat transfer in TIG welding. The aim is also to evaluate the influence of different experimental conditions (gaz nature, current intensity, arc length...) on theses mechanisms. Several lines of research were defined: - the study of the plasma temperature under different experimental conditions; - the study of the arc-liquid interface to understand the weld pool flow behavior and the impact of metallic vapor on the arc plasma ; - the study of the work piece after interaction to determine the dimension of the melted zone and link it to the flow behavior during the process. Arc-material interaction phenomena can be studied through modeling and experience. A 3D model has recently been designed in our team. The experimental characterization of the process developed in this work should provide a set of data to validate it
Paulíček, Martin. "Ladění výkonnosti databází." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2011. http://www.nusl.cz/ntk/nusl-237021.
Full textSHEN, JING-LI, and 沈勁利. "Analysis for network configuration patterns of rapid transit system." Thesis, 1992. http://ndltd.ncl.edu.tw/handle/03227476531542059217.
Full textJan, Yaw-Kuen, and 詹耀坤. "Lamp Configuration and Control System Design for Rapid Thermal Processing Systems." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/65970260417464659468.
Full text國立交通大學
電機與控制工程系
88
Rapid thermal processing (RTP) has become an alternative to the traditional furnace-based batch processing in semiconductor manufacturing processes such as annealing, nitridation and oxidation. We study design of temperature control system and lamp configuration for RTP systems. We consider a configuration consists of four concentric circular lamp zones, three of them above the wafer and one circumvallating the wafer. We propose a method to determine the geometric parameters, the width, height and radius, of the lamp zones so that the configuration designed has the capacity to achieve uniform temperature on the wafer. The method is based on a necessary and sufficient condition for uniform temperature tracking and analytic expressions of the view factors. For the designed lamp configuration, we proposes a control system consisting of a least square feedforward controller and an output feedback proportional plus integral (PI) controller. A high-order nonlinear model describing the temperature dynamics of the RTP system is used for the feedforward controller design. A balanced reduced model, obtained from a linear model around a desired uniform steady-state temperature, is used for the design of the MIMO PI controller. The PI controller gain matrices are designed using an LQR based procedure. Tradeoff between robustness and performance of the system is discussed. Simulation results show the control system designed yields robust temperature tracking with good uniformity for a wide temperature range. Acknowledgement ii Chapter 1: Introduction 1 1.1 Background 1 1.2 General Description on Our Lamp Configuration and Control System 2 1.3 Notations 4 Chapter 2: RTP System Model 5 2.1 System Description 5 2.1.1 The RTP System Considered 5 2.1.2 A Dynamic System Model 5 2.2 Temperature Uniformity Condition 7 Chapter 3: Lamp Configuration Design 9 3.1 The View Factor: Formulas and Properties 9 3.1.1 View Factor on the Wafer Surface 9 View Factors Associated with Lamps 1-3 9 View Factors Associated with Lamp 4 11 3.1.2 View Factor on the Wafer Edge 11 3.2 Lamp Design for Uniform Temperature Tracking 12 3.2.1 Constraints on the View Factors 12 3.2.2 Design to Minimize the Variation of View Factors 14 3.2.3 Design Procedure and Examples 16 3.2.4 Least Square Open-Loop Control 19 3.2.5 Discussions 22 Chapter 4: Control System Description 23 4.1 Control System Structure 23 4.1.1 Least Square Feedforward Controller 23 4.1.2 A Model for Sensor Locations and PI Controller Design 24 4.1.3 The Overall Control System 25 4.2 Sensor Locations and Steady-State Performance 26 4.2.1 Effects of Sensor Locations on Steady-State Error 26 4.2.2 Selecting Sensor Locations 29 Chapter 5: Controller Design 31 5.1 Design of Gain Matrices Based on a Reduced Model 31 5.1.1 Model Reduction via Balanced Realization 31 5.1.2 Stability Consideration 32 5.1.3 Design of K and G 33 5.1.4 Performance Analysis 35 5.2 Design Procedure and Simulation Results 37 5.2.1 Design Procedure 37 5.2.2 Simulation Results 38 Chapter 6: Conclusion 45 Reference 47 Appendix: A 51 B 53 C 57 D 59 E 62 F 65 G 66
Chiu, Chao-Ching, and 邱兆慶. "The linkage of top management team experience configuration and rapid growth of small and medium sized enterprises." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/14276628424308292931.
Full text國立東華大學
企業管理學系
103
The 2008 global financial crisis has impacted the global economic environment and placed small and medium sized enterprises in trouble of growth. Past studies rarely investigate on the linkage of top management team (TMT) experience configuration and growth of small and medium sized enterprises. This study applies upper echelons theory and configuration theory and utilizes fuzzy set qualitative comparative analysis(fsQCA) to find out what TMT experience configuration are sufficient conditions for rapid growth of small and medium sized enterprises post the global financial crisis. This study focuses on the electronic connector industry in Taiwan. The case firms of this study consist of 3 firms with rapid growth and 3 firms with slow or no growth after the global financial crisis. This study includes two-phases. In the first phase, case study research was used to explore what factors may influence the growth of small and medium sized enterprises; In the second phase, fsQCA was applied to identify important TMT experience configurations which are sufficient configurations for rapid growth of small and medium sized enterprises. The result of this study indicates that ‘TMT with high functional diversity’, ‘TMT with high education diversity in terms of curriculum’, ‘more TMT members with relevant experience’, ‘CEO with technical background’, ‘chairman of board also acting as CEO’, and ‘ratio of management team members with MBA degree’ are important factors among configurations leading to rapid growth of small and medium sized enterprises. Among the factors, ‘chairman of board also acting as CEO’ and ‘ratio of management team members with MBA degree’ are substitutive to each other. For young enterprises, ‘venture capital support’ is important. However, ‘venture capital support’ and ‘chairman of board also acting as CEO’ may impede the rapid growth potential for mature small and medium sized enterprises. Moreover, this study suggests 3 configurations, which sufficiently explain the rapid growth of small and medium sized enterprises. The 3 configurations are ‘new ventures with exploration-oriented management teams’, ‘new ventures with exploitation-oriented management teams’, and ‘mature firms with exploration-oriented management team’. This study not only fills out research gaps on the TMT experience configuration and growth of small and medium sized enterprises but also provides directions for practice and future research on growth of small and medium sized enterprises.
I-Ming, Liao, and 廖宜銘. "The Relationship between Network Configuration Patterns of Rapid Transit System and Transportation Demand Characteristics in the Main Jing Luo of Human World." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/17376298023446135242.
Full text國立成功大學
高階管理碩士在職專班
97
A study on《The Relationship between Network Configuration Patterns of Rapid Transit System and Transportation Demand Characteristics in the Main Jing Luo of Human World》in《Yellow Emperor’s Inner Canon》. What does it mean when traditional Chinese medicine says the words such as “liver”、“heart”、“spleen”、“lung” and “kidney”?As we know, the theory of Zangxiang in traditional Chinese medicine is quite different from the knowledge of physiology in modern medicine. In Huangdi’s Neijing of Medicine, there are many descriptions about the theory. The theory of Zangxiang is based on the study of the viscera, and the viscera in the theory of Zangxiang is not only a simple anatomical conception, but also a conception that generalizes the physiology and pathology of a certain system in the human world。 In 《Suwen.Ling-lan-mih-dean-luenn》,the functions of the twelve viscera and the relationships between them are mentioned and the author uses the twelve government officials to compare to the twelve viscera, but, this political metaphor seems quite difficult to be understood by the people living in modern times. Because the description in 《Suwen.Ling-lan-mih-dean-luenn》is brief and concise, most clinical Chinese medical doctors do not pay much attention to it. In this study, we tried to find out the relationship between Network configuration patterns of rapid transit system and transportation demand characteristics in order to know the physiological functions of the twelve Jing Luo in the human world traditional Chinese medicine .
Lee, Chien-Yu, and 李建佑. "A Study of the Relationship between Network Configuration Patterns of Rapid Transit System and Transportation Demand Characters in the Main Cities of World." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/3r3z8e.
Full text國立成功大學
都市計劃學系碩博士班
90
From the tendency of urban development in the main cities of world, during the urban competitive market, if the city wants to become successful in the 21th century, it must have a convenient urban rapid transit system. Owing to the complicated and extensive context about network configuration patterns of rapid transit system, the study is tried to analyze network configuration patterns of rapid transit system in the main cities of world and to classify several major patterns in order to compare their difference. Moreover, the study collects network configuration patterns of rapid transit system, urban population, and transportation demand characters in the main cities of world to model the regression equation for understanding their relationship. Finally, based on the developed model and the principle inferences, it is applied to six metropolitan areas in Taiwan for understanding the planning about the rapid transit system, and providing suggestions for the institution of government.