To see the other types of publications on this topic, follow the link: Rafut.
Dissertations / Theses on the topic 'Rafut'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Rafut.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Fleet, Reda. "RAFT mediated polysaccharide copolymers." Thesis, Link to the online version, 2006. http://hdl.handle.net/10019/1025.
Full text
2
Suwattana, Siripan. "Biodegradable polymers via RAFT." Thesis, University of Leeds, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.549765.
Full textAbstract:
This research has shown that biodegradable monomer (5,6-benzo-2- methylene-1,3-dioxepane) (BMOO) can be achieved. Also its homo-and-eo- polymerisation can be successfully realised via RAFT and ROP polymerisation techniques. BMOO was synthesised with the modification via the dehydrobrornination of 5,6-benzo-2-(bromomethyl)-1,3-dioxepane in a good yield (95% yields). The homopolymerisation of BMOO were designed to produce a target OP of 200 via living "polymerisation" and complete ring-opening polymerisation. A narrow POI (1.09) and an M n= 4,697 g mol' were observed after 24 hours for the reaction in the presence of the CT A(MCPDB)' The copolymerisation of MMA and BMOO in the presence of the CT A(CPDB) gave better control over the polymerisation than that achieved using the CT A(MCPDB) and the CTA(ETSPE), at 120 "C. A narrow POI (1.36) and an Mn= 16,662 g mol' were observed after 24 hours. The copolymer was shown to be results of a combination of 1,2-addition polymerisation and of ring-opening copolymerisation. The reactivity ratio of the monomers was calculated using the Kelen- Tudos method (rMMA= 1.12 and rBMDO= 0.43). The copolymerisation of styrene with BMOO in the presence of the CTA(cPDB) gave the better control than that given by the CT A(MCPDB) and the CTA(ETSPE), at 120aC (Sty:BMOO, with an initial feed of 33%:67%). A narrow POI (1.18) and M n= 9,684 g rnol' were obtained after 24 hours. The % ratio of BMOO that was incorporated into the final polymeric chain was Sty:BMOO= 64.3%:35.7% and the copolymer was formed from ring-opening polymerisation only. The reactivity ratio of the monomers was calculated using the Kelen-TOdos method (rsty= 2',56 and rBMDO= 0.64). NMR, FTIR and UVlVis spectroscopy provided further evidence that the final polymers were the product of a ring-opening polymerisation. As required, thermal analysis techniques were used to ascertain the consequences of the copolymerisation, with respect to thermal consequences (decomposition) and compositional features.
3
Antus, Joakim. "Reaching Consensus Using Raft." Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-301332.
Full textAbstract:
This thesis project implements and evaluates log replication using the Raft consensus algorithm. Raft presents a new and easier to understand consensus protocol for log replication in a distributed system. This thesis aims to evaluate the correctness and robustness of Raft by implementing a scalable system that is easy to maintain and test for further development. This thesis gives an in-depth description of Raft as well as a detailed explanation of the implemented system together with an evaluation of the system performance with focus on correctness.
4
Zong, Mengmeng. "RAFT polymerisation in supercritical CO2." Thesis, University of Nottingham, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.537644.
Full text
5
Nozari, Samira. "Towards understanding RAFT aqueous heterophase polymerization." Phd thesis, Universität Potsdam, 2005. http://opus.kobv.de/ubp/volltexte/2005/580/.
Full textAbstract:
Reversible addition-fragmentation transfer (RAFT) was used as a controlling technique for studying the aqueous heterophase polymerization. The polymerization rates obtained by calorimetric investigation of ab initio emulsion polymerization of styrene revealed the strong influence of the type and combination of the RAFT agent and initiator on the polymerization rate and its profile. The studies in all-glass reactors on the evolution of the characteristic data such as average molecular weight, molecular weight distribution, and average particle size during the polymerization revealed the importance of the peculiarities of the heterophase system such as compartmentalization, swelling, and phase transfer. These results illustrated the important role of the water solubility of the initiator in determining the main loci of polymerization and the crucial role of the hydrophobicity of the RAFT agent for efficient transportation to the polymer particles. For an optimum control during ab-initio batch heterophase polymerization of styrene with RAFT, the RAFT agent must have certain hydrophilicity and the initiator must be water soluble in order to minimize reactions in the monomer phase.
An analytical method was developed for the quantitative measurements of the sorption of the RAFT agents to the polymer particles based on the absorption of the visible light by the RAFT agent. Polymer nanoparticles, temperature, and stirring were employed to simulate the conditions of a typical aqueous heterophase polymerization system. The results confirmed the role of the hydrophilicity of the RAFT agent on the effectiveness of the control due to its fast transportation to the polymer particles during the initial period of polymerization after particle nucleation. As the presence of the polymer particles were essential for the transportation of the RAFT agents into the polymer dispersion, it was concluded that in an ab initio emulsion polymerization the transport of the hydrophobic RAFT agent only takes place after the nucleation and formation of the polymer particles. While the polymerization proceeds and the particles grow the rate of the transportation of the RAFT agent increases with conversion until the free monomer phase disappears.The degradation of the RAFT agent by addition of KPS initiator revealed unambigueous evidence on the mechanism of entry in heterophase polymerization. These results showed that even extremely hydrophilic primary radicals, such as sulfate ion radical stemming from the KPS initiator, can enter the polymer particles without necessarily having propagated and reached a certain chain length. Moreover, these results recommend the employment of azo-initiators instead of persulfates for the application in seeded heterophase polymerization with RAFT agents.
The significant slower rate of transportation of the RAFT agent to the polymer particles when its solvent (styrene) was replaced with a more hydrophilic monomer (methyl methacrylate) lead to the conclusion that a complicated cooperative and competitive interplay of solubility parameters and interaction parameter with the particles exist, determining an effective transportation of the organic molecules to the polymer particles through the aqueous phase. The choice of proper solutions of even the most hydrophobic organic molecules can provide the opportunity of their sorption into the polymer particles. Examples to support this idea were given by loading the extremely stiff fluorescent molecule, pentacene, and very hydrophobic dye, Sudan IV, into the polymer particles.
Finally, the first application of RAFT at room temperature heterophase polymerization is reported. The results show that the RAFT process is effective at ambient temperature; however, the rate of fragmentation is significantly slower. The elevation of the reaction temperature in the presence of the RAFT agent resulted in faster polymerization and higher molar mass, suggesting that the fragmentation rate coefficient and its dependence on the temperature is responsible for the observed retardation.
Um neue Materialien mit außergewöhnlichen Eigenschaften zu erstellen, muss man in der Lage sein, die Struktur der Moleküle zu kontrollieren, aus denen die Materialien bestehen. Für das Maßschneidern solcher neuer Eigenschaften besitzen Polymere ein großes Potenzial: Dies sind sehr lange Moleküle, die aus einer großen Zahl von kleineren Einheiten aufgebaut sind. Proteine und DNS sind Beispiele für natürliche Polymere; Plastik und Gummi sind Beispiele für künstliche Polymere. Letztere werden üblicherweise durch das Zusammenfügen einer Reihe von kleineren Molekülen, den Monomeren, hergestellt. Schon lange versuchen Wissenschaftler, die Anordnung, Anzahl und Art dieser Monomere zu kontrollieren, die sich in der Struktur der Polymermoleküle widerspiegeln. Die gebräuchlichste Methode zur kommerziellen Produktion von Polymeren ist die so genannte freie radikalische Polymerisation. Die Strukturkontrolle durch diese Methode ist jedoch relativ schwierig und wurde maßgeblich erst im letzten Jahrzehnt entwickelt. Trotz der Existenz einiger effektiver Kontrollmethoden ist ihre industrielle Anwendung bislang sehr beschränkt, weil sie nicht für die Emulsionspolymerisation verwendbar sind. Die Emulsionspolymerisation ist die gängigste Technik in der industriellen Produktion von Polymeren. Es handelt sich dabei um ein vergleichsweise umweltfreundliches Verfahren, denn es werden keine organischen Lösungsmittel verwendet. Stattdessen dient Wasser als Lösungsmittel, in dem die Polymere in Form von kleinen, fein verteilten Partikeln vorliegen. In der Natur kommt dieses Prinzip beispielsweise in Pflanzen bei der Bildung von Kautschuk - allgemein als Latex bezeichnet - vor. Schließlich ist die Emulsionspolymerisation einfach durchzuführen: Das Produkt ist in vielen Fällen gebrauchsfertig, und es gibt viele technische Vorteile im Vergleich zu anderen Herstellungsprozessen.
Doch bevor die Probleme beim Einsatz von Kontrollmethoden in der Emulsionspolymerisation gelöst werden können, müssen erst ihre Ursachen geklärt werden. Dies ist eine unverzichtbare Vorraussetzung zum Übertragen von Forschungsergebnissen auf das tägliche Leben.
Ziel dieser Arbeit ist die Untersuchung der Probleme, die für die kontrollierte radikalische Polymerisation in Emulsion von Bedeutung sind. Die wichtigste Fragestellung in der Emulsionspolymerisation zielt auf die Löslichkeit der Reaktionskomponenten in den verschiedenen Phasen, wie z.B. in Wasser oder in den Polymerpartikeln. Die Kontrollmethode der Wahl für diese Arbeit ist "Reversibler Additions-Fragmentierungs Transfer" (RAFT). Die RAFT-Methode ist die modernste Kontrollmethode, und sie ist für viele Reaktionsbedingungen und viele Arten von Monomeren anwendbar.
6
Gemici, Hesna. "Water soluble polymers by RAFT polymerisation." Thesis, University of Leeds, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.507717.
Full text
7
Bray, Caroline. "Aqueous RAFT polymerisation of acrylamide monomers." Thesis, University of Warwick, 2018. http://wrap.warwick.ac.uk/111296/.
Full textAbstract:
The challenge of this project was to control the polymerisation of acrylamide monomers, particularly sodium 2-acrylamido-2-methylpropane sulfonate (Lubrizol trademark, AMPS®2405), via reversible addition-fragmentation chain transfer (RAFT) polymerisation in aqueous solution. AMPS® based polymers are employed in a wide range of applications (e.g. medical, paint, oil recovery and water treatment), and are typically obtained via conventional radical polymerisation. Here, the use of the RAFT process to control the polymerisation of AMPS®2405 was reported, and well-defined polymeric architectures were obtained compared to materials obtained via free radical polymerisation (FRP). The chain transfer agent (CTA) of choice for this project was initially DDMAT (CTA-A, Z-group is C12H25), and a water soluble CTA synthesised by the Lubrizol corporation (USA) in tonne-scale. DDMAT is known to form aggregates in water ([CAC]DDMAT =0.005 M) and this is likely to disrupt the RAFT mechanism and consequently diminish the control over the polymerisation. To overcome this problem a chain transfer agent with a shorter alkyl chain (BDMAT, Z-group is C4H9) was used for comparison with DDMAT. The polymerisation of AMPS®2405 monomer was optimised, as discussed in CHAPTER 2, in aqueous solution using either DDMAT or BDMAT as a chain transfer agent. These conditions were found to be universal to other water soluble acrylamide monomers (N,N-dimethylacrylamide, N-hydroxyethyl acrylamide and 4-acryloylmorpholine). More complex architectures were designed, as described in CHAPTER 3, exploiting the high chain end fidelity and chain extensions. A small library of diblock copolymers using various comonomers (N,N-dimethylacrylamide, N-hydroxyethyl acrylamide, 4-acryloylmorpholine, acrylic acid and acrylamide) were first synthesised. The synthesis of star polymers using the arm first approach was further studied, and well-defined multiblock star copolymers were obtained by RAFT polymerisation. These structures synthesised were characterised, as discussed in CHAPTER 4, using diverse techniques (e.g. SAXS, DLS, SEC with triple detection and AFM). While copolymers prepared from AMPS®2405 can be used in numerous applications, the focus of this thesis, as discussed in CHAPTER 5, was to study their benefit as heparin-mimicking polymers.
8
Elnakat, Hala. "Regulation of Folate Receptor Raft Recycling." University of Toledo Health Science Campus / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=mco1174569209.
Full text
9
Rakut, Christian [Verfasser]. "Analyse der Wärmetransportmechanismen in thermischen Radialturbinen / Christian Rakut." Düren : Shaker, 2019. http://d-nb.info/1196487553/34.
Full text
10
Pflughaupt, Robin L. "In pursuit of RAFT-functional polyethylene : exploration of a novel class of Sn-RAFT agents and the preparation and application of RAFT-functional polyethylene-like poly(ω-pentadecalactone)." Thesis, University of Warwick, 2014. http://wrap.warwick.ac.uk/64038/.
Full textAbstract:
This work explores the preparation of Reversible Addition-Fragmentation chain-Transfer (RAFT)-functional polyethylene (PE). Challenges in developing methods to control the polymerization of primary radicals and prepare functional polyethylene are significant. Modest control over ethylene polymerization demonstrated via F-RAFT polymerization inspired our interest in RAFT agent design and we envisaged that metallo-RAFT agents could present different reactivities towards primary radicals. Considering the challenge of attempting to develop chemistry for the controlled radical polymerization of primary radicals, preparation of RAFT-functional polyethylene-like poly(ω-pentadecalactone) (PPDL) was also investigated. We envisaged the preparation of RAFT-functional PPDL to be more convenient than reported strategies to prepare functional polyethylene all whilst being a “green” alternative to PE that may be suitable for some applications. Chapter 1 discusses challenges in preparing functional polyethylene via controlled radical polymerization techniques. Furthermore, metallo-RAFT chemistry and the ring-opening polymerization of macrocyclic esters are reviewed. Chapter 2 describes the synthesis of PPDL via enzymatic ring-opening polymerization (eROP). Using a bifunctional initiator appropriate for the RAFT polymerization of acrylic and styrenic monomers, RAFT-functional poly(ω-pentadecalactone) was prepared. Furthermore, chain extension of the macro-chain-transfer agent was utilized to prepare acrylic and styrenic block copolymers of PPDL. To our knowledge, this is the first preparation of block copolymers of poly(ω-pentadecalactone) via a combination of eROP and RAFT polymerization techniques. Chapter 3 describes the large scale synthesis and characterization of a selection of acrylic block copolymers of PPDL suitable for fuels applications. Furthermore, the fuels testing of these copolymers for cold flow applications is described. In general, all block copolymers of PPDL, in particular poly(ω-pentadecalactone)-b-poly(isodecyl acrylate) improved the cold flow performance of various diesel fuels. Chapter 4 reports the synthesis of Sn-RAFT agents and their subsequent use in the controlled radical polymerization of several vinylic monomers. Chapter 5 summarizes the findings in chapters 2 – 4 and Chapter 6 communicates the associated experimental data.
11
Peng, Wentao. "Binary Planet–Satellite Nanostructure Using RAFT Polymer." Doctoral thesis, Niedersächsische Staats- und Universitätsbibliothek Göttingen, 2020. http://hdl.handle.net/21.11130/00-1735-0000-0005-144A-2.
Full text
12
Banaco, Joana Filipa das Neves. "Encapsulação de nanopartículas anisotrópicas por polimerização RAFT." Master's thesis, Universidade de Aveiro, 2013. http://hdl.handle.net/10773/12265.
Full textAbstract:
Mestrado em Engenharia QuímicaOs avanços tecnológicos recentes têm vindo a gerar um enorme interesse em novos materiais, desafiando a comunidade científica a focarem a sua atenção no desenvolvimento de novos métodos de síntese para a produção, por exemplo, de nanocompósitos. O objetivo deste trabalho consistiu na otimização do procedimento de encapsulação de nanopartículas anisotrópicas (NPs) recorrendo à polimerização em emulsão e ao mecanismo de polimerização controlada por reações reversíveis de adição-fragmentação de um agente de transferência de cadeia (RAFT). No sentido de se obter um filme de polímero em torno das partículas e minimizar a formação de polímero livre, foram efetuados estudos de adsorção de um agente RAFT macromolecular (MR) à superfície de nanofibras de Gd2O3:Eu3+revestidas com sílica não calcinada cujos resultados foram monitorizados por espectroscopia UV/VIS. Nestes estudos foram analisados dois parâmetros, o pH e o tempo de contacto adsorvato/adsorvente. Estes tiveram como principal objetivo a obtenção das isotérmicas de equilíbrio de adsorção a 25 ºC, as quais forneceram informação acerca da quantidade máxima de MR adsorvida. Através desta informação, foi possível inferir que os dois parâmetros analisados afetaram significativamente os resultados. Os dados experimentais foram modelados recorrendo a alguns modelos teóricos de adsorção verificando-se que tanto os modelos de Langmuir, como o de Freundlich se ajustam bem aos resultados obtidos. Numa segunda fase, foi estudada a encapsulação das nanofibras através da polimerização em emulsão via RAFT de metacrilato de metilo (MMA) e de acrilato de n-butilo (BA). Estas polimerizações foram efetuadas a pH 7, 5,5 e 3,5 (80 ºC), e com as condições ótimas provindas dos estudos de adsorção. Os látexes obtidos foram caracterizados por dispersão de luz dinâmica (DLS) e potencial zeta (ZP). Os látexes obtidos a pH 7 foram também caracterizados por microscopia eletrónica de varrimento em modo de transmissão (STEM). A conversão foi determinada por gravimetria. Os resultados obtidos por STEM confirmaram a encapsulação das nanopartículas assim como os valores obtidos de ZP. No entanto, os valores obtidos para a conversão de monómero foram apenas de 45%.
Recent technological advances have been the basis of increasing interest in the development of new materials, challenging the scientific community to focus their attention to devise new synthesis methods for the production of e.g. nanocomposites. The purpose to this work consists in the optimization of the procedure to encapsulate anisotropic nanoparticles(NPs), using the emulsion polymerization and the polymerization mechanism controlled by reversible addition-fragmentation of a chain transfer agent (RAFT). In order to obtain a polymer film surrounding the particles and minimize the formation of free polymer, the adsorption of a macromolecular RAFT agent (MR) onto the surface of Gd2O3:Eu3+coated with uncalcined silica was studied, where results were monitored by UV / VIS spectroscopy. This study analyzed two parameters: pH and contact time of adsorbant /adsorbent. The aim of this was to obtain the equilibrium adsorption isotherms at 25ºC, which provided information about the maximum amount of adsorbed MR. This information proved that the two analyzed parameters significantly affect the results. The best values were obtained at a pH of 5.5 and a contact time of 15 hours. The experimental data were adjusted to some theoretical models of adsorption and it was verified that the Langmuir and Freundlich models fit the obtained results. In a second stage of this work, the encapsulation of nanofibres by emulsion polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA) RAFT was studied. These polymerizations were carried out at pH 7, 5,5 and 3,5 (80 ºC), using the optimal conditions previously established from adsorption studies. The obtained latexes were characterized by dynamic light scattering (DLS) and zeta potential (ZP). The latexes obtained at pH 7 were also characterized by scanning transmission electron microscopy (STEM). The conversion was determined gravimetrically. The results obtained with STEM and ZP confirmed the encapsulation of nanoparticles. However, the value obtained for monomer conversion was low (45%).
13
Leswin, Joost Sieger Kaspar. "Particle Formation in RAFT-mediated Emulsion Polymerization." Thesis, The University of Sydney, 2007. http://hdl.handle.net/2123/2176.
Full textAbstract:
Particle formation in RAFT-mediated emulsion polymerization has been studied using reaction calorimetry. By measuring the heat flow during controlled feed ab-initio emulsion polymerization in the presence of amphipathic RAFT agents, particle formation by self-assembly of these species could be observed. Two different monomer systems, i.e. styrene and n-butyl acrylate, and various degrees of hydrophobicity of the initial macro-RAFT agents have been studied and compared. The different macro-RAFT agents were synthesized by first forming a hydrophilic block of poly(acrylic acid) that would later on act as the electrosteric stabilizing group for the particles. Subsequently, different lengths of hydrophobic blocks were grown at the reactive end of the poly(acrylic acid) hydrophilic block via the RAFT-mediated controlled radical polymerization, either comprised of n-butyl acrylate or styrene. Two processes govern particle formation: adsorption of macro-RAFT agents onto growing particles and formation of new particles by initiation of micellar aggregates or by homogeneous nucleation. Competition between these processes could be observed when monomers with a relatively high (n-butyl acrylate) or low (styrene) propagation rate coefficient were used. A model describing particle formation has been developed and the results of model calculations are compared with experimental observations. Preliminary modeling results based on a set of reasonable physico-chemical parameters already showed good agreement with the experimental results. Most parameters used have been verified experimentally. The development of the molecular weight distribution of the macro-RAFT agents has been analyzed by different techniques. Quantification of the particle formation process by analytical techniques was difficult, but qualitative insights into the fundamental steps governing the nucleation process have been obtained. The amount of macro-RAFT agents initially involved in particle formation could be determined from the increase of molecular weight. The particle size distribution has been measured by capillary hydrodynamic fractionation, transmission electron microscopy and dynamic light scattering. From the data obtained from these particle-sizing techniques, the number of particles during the reaction could be monitored, leading to an accurate estimate for the particle formation time. Upon implementation of the experimental data obtained for the surface active macro-RAFT systems, the model demonstrated to be very sensitive towards the “headgroup” area of the macro-RAFT species. Three nucleation cases based on the initial surface activity of the macro-RAFT species in the aqueous phase are proposed to explain the deviations from the assumptions of the nucleation model. Even though the macro-RAFT species have a narrow molecular weight distribution, they are nevertheless made up of a distribution of block lengths of polystyrene upon a distribution of block lengths of poly(acrylic acid). The resulting differences in initial surface activity are the most probable reason for the observed differences between model calculations and experimental results for the nucleation time and particle size distribution of the final latex product. With the procedure described above, latexes have been synthesized without using conventional surfactants and the mechanisms involved in the particle formation for these systems have been elucidated. The results of this work enable production of latex systems with well defined molecular mass distributions and narrow particle size distributions. Furthermore, the technique based on the application of amphipathic RAFT agents is promising for the production of complex polymeric materials in emulsion polymerization on a technical scale.
14
Leswin, Joost Sieger Kaspar. "Particle Formation in RAFT-mediated Emulsion Polymerization." University of Sydney, 2007. http://hdl.handle.net/2123/2176.
Full textAbstract:
Doctor of Philosophy(PhD)Particle formation in RAFT-mediated emulsion polymerization has been studied using reaction calorimetry. By measuring the heat flow during controlled feed ab-initio emulsion polymerization in the presence of amphipathic RAFT agents, particle formation by self-assembly of these species could be observed. Two different monomer systems, i.e. styrene and n-butyl acrylate, and various degrees of hydrophobicity of the initial macro-RAFT agents have been studied and compared. The different macro-RAFT agents were synthesized by first forming a hydrophilic block of poly(acrylic acid) that would later on act as the electrosteric stabilizing group for the particles. Subsequently, different lengths of hydrophobic blocks were grown at the reactive end of the poly(acrylic acid) hydrophilic block via the RAFT-mediated controlled radical polymerization, either comprised of n-butyl acrylate or styrene. Two processes govern particle formation: adsorption of macro-RAFT agents onto growing particles and formation of new particles by initiation of micellar aggregates or by homogeneous nucleation. Competition between these processes could be observed when monomers with a relatively high (n-butyl acrylate) or low (styrene) propagation rate coefficient were used. A model describing particle formation has been developed and the results of model calculations are compared with experimental observations. Preliminary modeling results based on a set of reasonable physico-chemical parameters already showed good agreement with the experimental results. Most parameters used have been verified experimentally. The development of the molecular weight distribution of the macro-RAFT agents has been analyzed by different techniques. Quantification of the particle formation process by analytical techniques was difficult, but qualitative insights into the fundamental steps governing the nucleation process have been obtained. The amount of macro-RAFT agents initially involved in particle formation could be determined from the increase of molecular weight. The particle size distribution has been measured by capillary hydrodynamic fractionation, transmission electron microscopy and dynamic light scattering. From the data obtained from these particle-sizing techniques, the number of particles during the reaction could be monitored, leading to an accurate estimate for the particle formation time. Upon implementation of the experimental data obtained for the surface active macro-RAFT systems, the model demonstrated to be very sensitive towards the “headgroup” area of the macro-RAFT species. Three nucleation cases based on the initial surface activity of the macro-RAFT species in the aqueous phase are proposed to explain the deviations from the assumptions of the nucleation model. Even though the macro-RAFT species have a narrow molecular weight distribution, they are nevertheless made up of a distribution of block lengths of polystyrene upon a distribution of block lengths of poly(acrylic acid). The resulting differences in initial surface activity are the most probable reason for the observed differences between model calculations and experimental results for the nucleation time and particle size distribution of the final latex product. With the procedure described above, latexes have been synthesized without using conventional surfactants and the mechanisms involved in the particle formation for these systems have been elucidated. The results of this work enable production of latex systems with well defined molecular mass distributions and narrow particle size distributions. Furthermore, the technique based on the application of amphipathic RAFT agents is promising for the production of complex polymeric materials in emulsion polymerization on a technical scale.
15
GIRETTI, Daniela. "MODELLING OF PILED RAFT FOUNDATIONS IN SAND." Doctoral thesis, Università degli studi di Ferrara, 2010. http://hdl.handle.net/11392/2389285.
Full textAbstract:
A piled raft is a composite foundation in which the piles are used as
settlement reducers and they share, with the raft, the load from the
superstructure. The applied load is transferred from the raft to the
shallow soil and to the pile heads, and from the piles it is diffused
through the shaft and the base to deeper soil. The pile–raft and pile–pile
interactions represent the distinctive aspect of the piled raft foundations
since they modify the load–bearing behaviour of each foundation
component, compared to an analogous isolated element, thus determining
the overall foundation behaviour.
The main aim of this thesis is to highlight the effects of the raft–soil–pile
interactions on the resistance and stiffness of axially loaded piled raft
foundations in sand.
A series of centrifuge tests on models of rigid circular piled rafts in loose
saturated sand has been performed to this end, employing both non
displacement and displacement piles. The raft settlement and the load
transmitted to the pile heads and bases were monitored during the tests,
which also included unpiled raft and isolated pile tests.
The test results have been analysed in terms of bearing capacity and
stiffness; the former according to a load efficiency method, the latter by
comparing the values obtained from centrifuge tests with those evaluated
through a simplified analytical method.
ii Modelling of Piled Raft Foundations in Sand D. Giretti
In order to clarify the effect of the pressure transmitted by the raft to the
soil on the behaviour of a single capped pile, some of the centrifuge tests
were simulated via finite element numerical analyses, using an elasto–plastic strain hardening constitutive model for the sand. The geometry
and the dimensions of the numerical models corresponded to those of the
physical ones and the simulations were carried out applying an
accelerated gravitational field to the mesh.
The influence of a granular layer, interposed between the raft and the pile
heads, on the load transfer mechanism has also been analysed, through an
additional series of centrifuge tests which was performed on square rigid
raft models on displacement piles in dry dense sand.
16
Nelson, Matthew D. "Lipid raft heterogeneity and dynamics in T lymphocytes." Click here for download, 2006. http://wwwlib.umi.com/cr/villanova/fullcit?p1432528.
Full text
17
Fischer, Thorsten. "Modelling of lipid raft formation in cell membranes." Thesis, University of Nottingham, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.546490.
Full text
18
Luheshi, Yousef Bashir. "The fatigue characteristics of precast concrete raft units." Thesis, University of Newcastle Upon Tyne, 1997. http://hdl.handle.net/10443/1582.
Full textAbstract:
This research project represents a continuation of the research programme into Precast Concrete Pavement Units, "P. C. P. U. ", which is based in the Department of Civil Engineering at the University of Newcastle upon Tyne. The units were referred to as raft units throughout the thesis which focused on the use of raft units as a full concrete paving system for aircraft parking, taxiway, and other low speed areas, at airports. The physical full scale test model was designed and constructed to represent the applied loading from one of the dual wheel legs of the design aircraft, a Boeing 727-200, when it is taxiing over a raft unit paving system. It was only possible for the test model to be provided with a contact area of 200 mm square compared to the real life of 400 mm square. A theoretical correction was applied to allow for this difference. Sixteen raft units were tested in pairs using the test model. The tests were divided into three modules to investigate the effect of the raft unit dimensions, Module(M1); the reinforcement design, Module(M2); and the raft thickness, Module(M3). The twin loading assembly applied a repetitive dynamic load which was moved manually between four different loading positions to represent the aircraft moving across the raft units. The primary aim of the experimental programme was to identify for the first time the fatigue life and failure mechanisms of the raft units under the influence of twin dynamic moving loads, and provide experimental results to enable a more refined numerical design method to emerge for raft units, as well as to determine the causes of failures and to recommend remedial measures. Observations were made of vertical deflection, concrete strains, crack widths and crack patterns, failure load, and failure modes, each of which were described in detail. The test observations showed that by increasing each of the following variables, namely, the aspect ratio, the amount of steel bar reinforcement and the thickness of the raft units, resulted in each case in an extension of raft unit life. It was found that some form of uplift restraint on the raft unit should be added to improve the fatigue life for one of the loading positions and that fibre reinforcement should not be used. The ultimate load capacity of the raft units was influenced by the loading position, the applied load level and the number of load repetitions, together with the crack patterns. Using the results from the raft units that had failed within a specific module, it was possible to predict the ultimate and reserve load capacity of raft units within the modules that were only partially fatigued. Four important conclusions have been established during the research project. Firstly, based on the test results, an empirical relationship was derived using regression analysis, relating the number of load repetitions to the aspect ratio, the amount of reinforcement, the raft thickness, and the applied loading. This will need further verification, but it should eventually be very useful when estimating the fatigue life of these specific raft unit models. Secondly, a new design method has been proposed. The design methods for raft units proposed previously by Bull, Ismail, Annang, Ackroyd, and the British Port Association were reviewed. The test results enabled a new design method to be developed which was based on Bull's method but proposed new design charts and tables for each of the raft units considered in the research project which introduced the additional variables of contact pressure and the exact loading position. Thirdly, the measured strains were used to develop strain fatigue relationships for designing raft units and estimating the reserve design life in a raft unit paving system for the purpose of maintenance management by relating the accumulated number of load repetitions of a design load to the permissible concrete strain. The strain fatigue equations were generated for each of the raft units considered in this research project. Thus, the most realistic way to control raft unit distress is through the use of a predictive fatigue model. This should prove invaluable to those involved in the maintenance of raft unit paving systems. Finally, life cycle cost analysis was conducted for three types of construction pavement (paving blocks, PQC, and raft units). The analysis demonstrated that the precast concrete raft units will become a viable alternative to conventional pavement construction and a real competitive to the concrete paving blocks.
19
Johnson, Fiona Ann. "The physico-chemical characterisation of alginate raft systems." Thesis, University College London (University of London), 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.297175.
Full text
20
Hann, Monika. "Raft microdomains in myelin : an in vitro investigation." Thesis, Open University, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.446302.
Full text
21
Jeffrey, J. G. "Synthesis and chemistry of hexaosmium carbonyl 'raft' clusters." Thesis, University of Cambridge, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.355865.
Full text
22
Morse, Charlotte. "Block copolymer nanoparticles prepared by RAFT aqueous polymerisation." Thesis, University of Sheffield, 2017. http://etheses.whiterose.ac.uk/19014/.
Full textAbstract:
This thesis describes the reversible addition-fragmentation chain transfer (RAFT) polymerisation of block copolymer nanoparticles in water. Firstly, a water-soluble poly(glycerol monomethacrylate) (PGMA) macromolecular chain-transfer agent (macro-CTA) was synthesised via RAFT solution polymerisation in ethanol. The PGMA macro-CTA is then chain-extended with 2-hydroxypropyl methacrylate (HPMA) via RAFT aqueous dispersion polymerisation. Polymerisation-induced self-assembly (PISA) occurs under these conditions, where the miscible HPMA monomer polymerises to form an insoluble poly (2-hydroxypropyl methacrylate) block, thus driving in situ formation of spheres, worms or vesicles. These PGMA-PHPMA diblock copolymers are then chain-extended with benzyl methacrylate (BzMA) via 'seeded' RAFT aqueous emulsion polymerisation to prepare PGMA-PHPMA-PBzMA triblock copolymers. In Chapter Two, a series of model framboidal PGMA-PHPMA-PBzMA triblock copolymer vesicles are synthesised with excellent control over surface roughness. Transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) were utilised to characterise these nanoparticles, which were subsequently used to stabilise n-dodecane emulsion droplets in water. The adsorption efficiency, Aeff, of the nanoparticles at the n-dodecane/water interface was determined as a function of increasing vesicle surface roughness using a turbidimetry assay. A strong correlation between surface roughness and Aeff was observed, with Aeff increasing from 36 % up to 94 %. This is a significant improvement in Pickering emulsifier efficiency compared to that reported previously for similar vesicles with smooth surfaces. In Chapter Three, a series of PGMA-PHPMA-PBzMA triblock copolymer worms and spheres are synthesised. For certain block compositions, highly anisotropic worm-like particles are obtained, which are characterised by SAXS and TEM. The design rules for accessing higher order morphologies (i.e. worms or vesicles) are briefly explored. Surprisingly, vesicular morphologies cannot be accessed by targeting longer PBzMA blocks - instead only spherical nanoparticles are formed. SAXS is used to rationalise these counter-intuitive observations, which are best explained by considering subtle changes in the relative enthalpic incompatibilities between the three blocks during the growth of the PBzMA block. Finally, these PGMA-PHPMA-PBzMA worms are evaluated as Pickering emulsifiers for the stabilisation of oil-in-water emulsions. Millimetre-sized oil droplets were obtained using low-shear homogenisation (hand-shaking) in the presence of 20 % vol. n-dodecane. In contrast, control experiments performed using PGMA-PHPMA diblock copolymer worms indicated that these more delicate nanostructures did not survive even these mild conditions. In the latter two experimental Chapters of this thesis, PISA is used to design block copolymer nanoparticles as potential drug delivery vehicles. Thus, PGMA-PHPMA diblock copolymer vesicles are prepared in the presence of varying amounts of silica nanoparticles of approximately 18 nm diameter. After centrifugal purification to remove excess non-encapsulated silica nanoparticles, analysis confirms encapsulation of up to hundreds of silica nanoparticles per vesicle. Silica is a model payload: it has high electron contrast compared to the copolymer and its thermal stability enables quantification of the loading efficiency via thermogravimetric analysis. Encapsulation efficiencies can be obtained using disk centrifuge photosedimentometry, since the vesicle density increases at higher silica loadings while the mean vesicle diameter remains essentially unchanged. SAXS is used to confirm silica encapsulation, because a structure factor is observed at q ~ 0.25 nm-1. A new two-population model provides satisfactory data fits to the SAXS patterns and allows the mean silica volume fraction within the vesicles to be determined. These silica-loaded vesicles constitute a useful model system for understanding the encapsulation of globular proteins, enzymes or antibodies within block copolymer vesicles for potential biomedical applications. They may also serve as an active payload for self-healing hydrogels or repair of biological tissue. Finally, by targeting a relatively short PHPMA block, PGMA-PHPMA vesicles can be obtained that lie close to the worm-vesicle phase boundary, rendering them thermo-responsive. The thermo-responsive nature of these vesicles enables thermally-triggered release of the encapsulated silica nanoparticles simply by cooling to 0-10oC, which induces a morphological transition. TEM studies confirm the change in diblock copolymer morphology and also enables direct visualisation of the released silica nanoparticles. Time-resolved small angle X-ray scattering is used to quantify the extent of silica release over time. For these experiments, the purified silica-loaded vesicles were cooled to 0oC for 30 min and SAXS patterns were collected every 15 s. For PGMA-PHPMA vesicles synthesised in the absence of silica nanoparticles, vesicles remained intact for 8 minutes before a vesicle-to-worm transition occurs. Thereafter, a worm-to-sphere transition occurs after 12 min at 0oC. For lower silica loadings, cooling induces a vesicle-to-sphere transition with subsequent nanoparticle release. For higher silica loadings, cooling to 0oC for 30 min only leads to perforation of the vesicle membranes, but silica nanoparticles are still released through the pores. For vesicles prepared in the presence of 30 % w/w silica, a new SAXS model has been developed to determine both the mean volume fraction of encapsulated silica remaining within the vesicles and also the scattering length density of the vesicle. Satisfactory data fits to the experimental SAXS patterns were obtained using this model. These results indicate that 68 % of the encapsulated silica is released from the vesicles after being held at 0°C for 30 min.
23
Cotanda, Santapau Maria José. "Amino-containing polymers for catalysis using RAFT polymerization." Thesis, University of Warwick, 2012. http://wrap.warwick.ac.uk/56272/.
Full textAbstract:
Chapter 1 is a general introduction of the whole thesis and it features the main concepts of this project. Chapter 2 reports the synthesis and self- assembly of a temperature-responsive DMAP containing nanoreactor. The DMAP motif is incorporated in to a monomer and polymerized by RAFT with styrene in order to form the hydrophobic block of a polymeric micelle. The shell of the micelle is formed by chain extension of the styrenic block with NIPAM, which provides temperature responsive properties to the system. In Chapter 3, the concept of using polymeric micelles to catalyze organic reactions in water is presented and compared to surfactant based micelles in the context of molecular recognition, achieving enzyme-like specific catalysis by tethering the catalyst in the well-defined hydrophobic core of a polymeric micelle In Chapter 4, the incorporation of different catalytic amino motifs into a polymer backbone is investigated by RAFT polymerization in order to catalyze the reaction between polyalcohols and polyisocyanates in the formation of polyurethane foams. In the final chapter, the stimuli-responsive properties of DMAEA containing polymers are investigated. DMAEA is copolymerized by RAFT with the non-responsive MA at different loadings in order to study how the distance between amine motifs affects the polymer LCST and pKas .values
24
Wilks, Thomas R. "Synthesis of DNA-polymer conjugates using RAFT polymerisation." Thesis, University of Warwick, 2013. http://wrap.warwick.ac.uk/58568/.
Full textAbstract:
The use of reversible addition–fragmentation chain transfer (RAFT) polymerisation for the production of DNA–polymer conjugates is explored. Chapter 1 gives a general introduction to the field of DNA–polymer conjugates, their potential applications and methods for their synthesis. The need for a general, solutionphase technique for DNA–polymer conjugation is highlighted. In Chapters 2-5, the use of a number of different strategies for the production of DNA–polymer conjugates is described. Amide coupling (Chapter 2) is found to produce the desired products only under very specific reaction conditions. The thiol–alkene Michael addition reaction (Chapter 3) is found to afford DNA–polymer conjugates in aqueous solution with high yield; however, attempts to replicate this using organic solvents are not successful. The inverse electron-demand Diels–Alder reaction between tetrazine and norbornene (Chapter 4) is explored and found to produce DNA–polymer conjugates in high yield in organic solvents; however, the precursor compounds are time-consuming to prepare and so the generality of this approach is limited. Finally, the copper-catalysed azide–alkyne cycloaddition (Chapter 5) is found to be an excellent method for the production of a wide range of DNA–polymer conjugates. Chapter 6 describes the use of the DNA segment of a DNA–polymer conjugate to assemble a discrete three dimensional nanostructure – a DNA tetrahedron – incorporating the temperature-responsive polymer poly(N-isopropylacrylamide). These hybrid structures are found to be able to stabilise the formation of discrete, well-defined polymer nanoparticles at elevated temperatures. Chapter 7 describes the use of a non-covalent interaction (intercalation) to produce DNA– polymer conjugates. The effect of polymer molecular weight and structure on the strength of this interaction are explored. Finally, intercalation is exploited to template the formation of discrete polymer particles on a DNA strand.
25
Chirowodza, Helen. "Polymer-clay nanocomposites prepared by RAFT-supported grafting." Thesis, Stellenbosch : Stellenbosch University, 2012. http://hdl.handle.net/10019.1/71914.
Full textAbstract:
Thesis (PhD)--Stellenbosch University, 2012.ENGLISH ABSTRACT: In materials chemistry, surface-initiated reversible deactivation radical polymerisation (SI-RDRP) has emerged as one of the most versatile routes to synthesising inorganic/organic hybrid materials consisting of well-defined polymers. The resultant materials often exhibit a remarkable improvement in bulk material properties even after the addition of very small amounts of inorganic modifiers like clay. A novel cationic reversible addition–fragmentation chain transfer (RAFT) agent with the dual purpose of modifying the surface of Laponite clay and controlling the polymerisation of monomer therefrom, was designed and synthesised. Its efficiency to control the polymerisation of styrene was evaluated and confirmed through investigating the molar mass evolution and chain-end functionality. The surface of Laponite clay was modified with the cationic chain transfer agent (CTA) via ion exchange and polymerisation performed in the presence of a free non-functionalised CTA. The addition of the non-functionalised CTA gave an evenly distributed CTA concentration and allowed the simultaneous growth of surface-attached and free polystyrene (PS). Further analysis of the free and grafted PS using analytical techniques developed and published during the course of this study, indicated that the free and grafted PS chains were undergoing different polymerisation mechanisms. For the second monomer system investigated n-butyl acrylate, it was apparent that the molar mass targeted and the monomer conversions attained had a significant influence on the simultaneous growth of the free and grafted polymer chains. Additional analysis of the grafted polymer chains indicated that secondary reactions dominated in the polymerisation of the surface-attached polymer chains. A new approach to separating the inorganic/organic hybrid materials into their various components using asymmetrical flow field-flow fractionation (AF4) was described. The results obtained not only gave an indication of the success of the in situ polymerisation reaction, but also provided information on the morphology of the material. Thermogravimetric analysis (TGA) was carried out on the polymer-clay nanocomposite samples. The results showed that by adding as little as 3 wt-% of clay to the polymer matrix, there was a remarkable improvement in the thermal stability.
AFRIKAANSE OPSOMMING: Oppervlakgeïnisieerde omkeerbare deaktiveringsradikaalpolimerisasie (SI-RDRP) is een van die veelsydigste roetes om anorganiese/organiese hibriedmateriale (wat bestaan uit goed-gedefinieerde polimere) te sintetiseer. Die produk toon dikwels ʼn merkwaardige verbetering in die makroskopiese eienskappe – selfs na die toevoeging van klein hoeveelhede anorganiese modifiseerders soos klei. ʼn Nuwe kationiese omkeerbare addisie-fragmentasie kettingoordrag (RAFT) middel met die tweeledige doel om die modifisering van die oppervlak van Laponite klei en die beheer van die polimerisasie van die monomeer daarvan, is ontwerp en gesintetiseer. Die klei se doeltreffendheid om die polimerisasie van stireen te beheer is geëvalueer en bevestig deur die molêre massa en die funksionele groepe aan die einde van die ketting te ondersoek. Die oppervlak van Laponite klei is gemodifiseer met die kationiese kettingoordragmiddel (CTA) deur middel van ioonuitruiling en polimerisasie wat uitgevoer word in die teenwoordigheid van ʼn vrye nie-gefunksionaliseerde CTA. Die toevoeging van die nie-gefunksionaliseerde CTA het ʼn eweredig-verspreide konsentrasie CTA teweeggebring en die gelyktydige groei van oppervlak-gebonde en vry polistireen (PS) toegelaat. Verdere ontleding van die vrye- en geënte PS met behulp van analitiese tegnieke wat ontwikkel en gepubliseer is gedurende die verloop van hierdie studie, het aangedui dat die vry- en geënte PS-kettings verskillende polimerisasiemeganismes ondergaan. n-Butielakrilaat is in die tweede monomeer-stelsel ondersoek en dit was duidelik dat die molêre massa wat geteiken is en die geënte polimeerkettings. ʼn Nuwe benadering tot die skeiding van die anorganiese/organiese hibriedmateriale in hulle onderskeie komponente met behulp van asimmetriese vloeiveld-vloei fraksionering (AF4) is beskryf. Die resultate wat verkry is, het nie net 'n aanduiding gegee van die sukses van die in-situ polimerisasiereaksie nie, maar het ook inligting verskaf oor die morfologie van die materiaal. Termogravimetriese analise (TGA) is uitgevoer op die polimeer-klei nanosaamgestelde monsters. Die resultate het getoon dat daar 'n merkwaardige verbetering in die termiese stabiliteit was na die toevoeging van so min as 3 wt% klei by die polimeermatriks.
26
Bailly, Nathalie. "AB diblock copolymers via RAFT-mediated miniemulsion polymerization." Thesis, Stellenbosch : Stellenbosch University, 2008. http://hdl.handle.net/10019.1/2707.
Full textAbstract:
Thesis (MSc (Chemistry and Polymer Science))--Stellenbosch University, 2008.The Reversible addition fragmentation chain transfer (RAFT) technique is a robust and versatile technique that enables the synthesis of polymers of controlled molecular weight and polydispersity. The application of the RAFT technique in heterogeneous aqueous media has attracted great interest in academics and industry due to it being more environmentally friendly, besides its other advantages. To date, the synthesis of well-defined high molecular weight polymers via the RAFT process under industrially relevant conditions still remains a challenge for polymer chemists. The study addresses the application of the RAFT process in heterogeneous media, namely in miniemulsion polymerization, for the synthesis of AB diblock copolymers of n-butyl methacrylate and styrene. AB diblock copolymers of high molecular weight were successfully prepared via a twostep method. In the first step, a dithiobenzoate monofunctional RAFT agent was used in bulk polymerization with the first monomer, n-butyl methacrylate. After the polymerization, the majority of the polymer chains contained the thiocarbonyl-thio RAFT agent functionality, which makes the chains potentially active for chain extension. The polymeric RAFT agent (also referred to as the starting block) obtained in the first step was chain extended in the second step, in miniemulsion, upon further addition of fresh initiator and the second monomer, styrene. The effects of the initiator/RAFT agent concentration ratio on the miniemulsion systems were investigated. The miniemulsion systems used for the high molecular weight AB diblock copolymers exhibited living features despite the high polydispersity indices. Kinetic results showed an increase in the rate of polymerization throughout the polymerization. Size exclusion chromatography (SEC) results indicated significant broadening in the molecular weight distributions and a steep increase in the polydispersity during the polymerization. It was concluded that the broad molecular weight distributions and steep increase in the polydispersity was not only related to the initiator concentration but possibly due to other factors such as inhomogeneity in the miniemulsion system and a transition in the kinetic behavior during the polymerization. Secondary particle formation emerged from kinetic data and transmission electron microscopy (TEM) results, but this were not supported by the SEC results. The effect of the use of a water-soluble initiator on the miniemulsion system was also investigated. Results indicated a similar behavioral pattern as observed in the AIBNinitiated systems, and not much improvement in terms of the molecular weight distributions and polydispersity was seen. The effect of the molecular weight of the diblock copolymers on the miniemulsion system was investigated. Poly(n-butyl methacrylate)-b-poly(styrene) diblock copolymers of lower molecular weight were synthesized via the two-step process. Kinetic results indicated a similar behavioral trend as to that of the high molecular weight diblock copolymers synthesized, however SEC chromatograms showed narrower molecular weight distributions and low polydispersity indices.
27
Bivigou, Koumba Achille Mayelle. "Design, synthesis and characterization of novel raft agents." Thesis, Stellenbosch : University of Stellenbosch, 2005. http://hdl.handle.net/10019.1/2992.
Full textAbstract:
Thesis (MSc (Chemistry and Polymer Science))--University of Stellenbosch, 2005.This thesis begins with the description of the preparation of thirteen dithioesters (of the form Z- (C=S)-S-R) which were characterized via Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (NMR) and ultraviolet spectroscopy (UV). The dithioesters were then used as reversible addition-fragmentation chain transfer (RAFT) mediating agents in the bulk polymerization of styrene, in order to observe differences in the kinetic behaviour of the polymerizations and, as a result, the efficiencies of the dithioesters in mediating the polymerizations.
28
Ng, Harald. "Distributed Consensus: Performance Comparison of Paxos and Raft." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-281973.
Full textAbstract:
With the growth of the internet, distributed systems have become increasingly important in order to provide more available and scalable applications. Con- sensus is a fundamental problem in distributed systems where multiple pro- cesses have to agree on the same proposed value in the presence of partial failures. Distributed consensus allows for building various applications such as lock services, configuration manager services or distributed databases.Two well-known consensus algorithms for building distributed logs are Multi-Paxos and Raft. Multi-Paxos was published almost three decades before Raft and gained a lot of popularity. However, critics of Multi-Paxos consider it difficult to understand. Raft was therefore published with the motivation of being an easily understood consensus algorithm. The Raft algorithm shares similar characteristics with a practical version of Multi-Paxos called Leader- based Sequence Paxos. However, the algorithms differ in important aspects such as leader election and reconfiguration.Existing work mainly compares Multi-Paxos and Raft in theory, but there is a lack of performance comparisons in practice. Hence, prototypes of Leader- based Sequence Paxos and Raft have been designed and implemented in this thesis. The prototypes were implemented using the Rust programming lan- guage and the message-passing framework Kompact and then benchmarked in real-world scenarios to compare the performance of Leader-based Sequence Paxos and Raft.The results show that Leader-based Sequence Paxos and Raft have simi- lar performance in geographically distributed deployments. However, the un- predictable leader election in Raft could greatly affect the performance if the elected leader is in an undesired location. In our experiments, the location of the Raft leader affected the average throughput by up to 35%. Furthermore, the results indicate that implementation details could have a significant impact on performance even in the parts where the algorithms are similar. By batch- ing messages more efficiently, Leader-based Sequence Paxos achieved up to 17% higher average throughput than Raft.Med tillväxten av internet har distribuerade system blivit allt mer viktiga för att bygga mer tillgängliga och skalbara applikationer. Konsensus är ett funda- mentalt problem i distribuerade system där flera processer ska komma överens om samma föreslagna värde, samtidigt som partiella fel kan ske. Distribuerad konsensus kan appliceras till olika användningsomården som låstjänster, kon- figurationshanterare och distribuerade databaser.Två välkända konsensusalgoritmer för att bygga distribuerade loggar är Multi-Paxos och Raft. Multi-Paxos publicerades nästintill tre årtionden före Raft och blev populär. Men kritiker av Multi-Paxos anser att algoritmen är svår att förstå. Av denna anledning publicerades Raft med motivationen att vara en konsensusalgoritm som är enkel att förstå. Raft delar likheter med Leader- based Sequence Paxos, en praktisk version av Multi-Paxos. Dock skiljer sig algoritmerna i viktiga aspekter som leaderval och rekonfigurering.Befintliga arbeten jämför i huvudsak Multi-Paxos och Raft i teorin, men det saknas jämförelse av prestandan i praktiken. Av denna anledning har pro- totyper av Leader-based Sequence Paxos och Raft blivit designade och imple- menterade i denna avhandling. Dessa prototyper implementerades i program- meringsspråket Rust och message-passing ramverket Kompact, som sedan tes- tades i verkliga situationer för att jämföra Leader-based Sequence Paxos och Raft.Resultaten visar att Leader-based Sequence Paxos och Raft har liknande prestanda i geografiskt distribuerade sammanhang. Dock kan det oförutsäga- bara ledarvalet i Raft påverka prestandan avsevärt ifall den valde ledaren befin- ner sig på en oönskad plats. I våra experiment påverkade Raft ledarens plats den genomsnittliga kapaciteten med upp till 35%. Resultaten visar även att implementationsdetaljer kan ha en signifikant effekt på prestandan även i de delar där algoritmerna är liknande. Genom att sammanfoga meddelanden mer effektivt uppnådde Leader-based Sequence Paxos 17% högre genomsnittlig kapacitet än Raft.
29
Lagarde, Antoine. "Birth, life and death of a granular raft." Thesis, Sorbonne université, 2020. http://www.theses.fr/2020SORUS054.
Full textAbstract:
Nous étudions le devenir d'une monocouche de particules à une interface huile-eau, appelée radeau granulaire, depuis sa formation jusqu'à son naufrage. Nous nous attaquons d'abord à l'interaction capillaire entre deux particules, que nous généralisons ensuite à deux radeaux granulaires. Cette force dépend fortement du nombre de particules, une conséquence directe de la déformation que chacun des radeaux impose à l'interface. Nous explorons ensuite l'interaction entre de nombreux radeaux granulaires répartis aléatoirement à l'interface. Leur agrégation est d'autant plus rapide que la distance initiale qui les sépare est faible. Le mouvement de chaque radeau ne peut être résolu analytiquement, mais l'agrégation dans son ensemble peut être décrite statistiquement. La distribution des tailles de radeaux évolue ainsi de manière auto-similaire. Nous nous tournons ensuite vers les changements structuraux qu'un radeau granulaire peut subir au cours de son mouvement, à savoir son érosion. Sa cohésion est bien supérieure à ce que prédit la théorie classique, un résultat que nous retrouvons également pour deux billes en contact. La description précise de la géométrie de la ligne de contact permet d'expliquer cette résistance étonnement grande à l'érosion. Pour finir, nous nous concentrons sur le naufrage d'un radeau granulaire, lorsque la déflexion verticale de l'interface devient trop grande. Le filament d'huile formé s'amincit en suivant un régime transitoire inhabituel, ce qui retarde l'apparition du régime final attendu. Ce résultat met l'accent sur le rôle décisif que les conditions aux limites peuvent jouer dans la transition entre deux régimes auto-similairesWe study the life of an axisymmetric monolayer of particles called a granular raft floating at an oil-water interface, from its formation to its sinking. We first look at the capillary interaction between a pair of beads, and generalize the result to a pair of granular rafts. The force strongly depends on the number of particles in each raft, a result that we understand by looking at the interfacial deformation each individual raft creates. Then, we explore the interaction between numerous granular rafts of different sizes randomly distributed. The aggregation is faster when the particles are initially more concentrated at the interface. The individual motion of each bead cannot be solved, but the overall clustering can be described statistically. The cluster-size distribution appears to answer to a self-similar evolution that we characterize. After that, we focus on the structural changes a granular raft can experience during its motion, and more precisely to its erosion. The cohesion of an entire raft is far higher than expected by the usual capillary theory. The same high cohesion is found between two beads in contact. A precise description of the position of the contact line accounts for the unexpectedly high resistance to erosion. Finally, we explore the dynamics of sinking of a granular raft, which happens when the vertical deflection of the interface exceeds a critical deformation. The oil thread formed during the sinking thins following an unusual path between the two classical self-similar regimes, delaying the onset of the final regime. This result emphasizes the decisive role boundary conditions can play in the transition between self-similarities
30
Wilkinson, Dorothy Kate. "Functional characterisation of the lipid raft protein stomatin." Thesis, University of Leeds, 2005. http://etheses.whiterose.ac.uk/448/.
Full textAbstract:
The function of the integral membrane protein stomatin is as yet poorly understood. Stomatin is deficient from the erythrocyte membrane of patients suffering with Overhydrated Hereditary Stomatocytosis (OHSt). Patient erythrocytes have altered morphology and are known as stomatocytes. It is believed that stomatin is mistrafficked in the developing stomatocyte. These patients suffer grossly abnormal cation fluxes in the stomatocyte membrane which causes increased osmotic fragility of the cell and results in haemolytic anaemia. This study set out to characterise further stomatin and to investigate its role in the cell. The membranes and lipid rafts of stomatocytes were found to have reduced actin levels as compared to erythrocytes, suggesting that stomatin may function as a structural protein linking the cytoskeleton to the membrane. Overexpression of stomatin in nucleated cells caused enhanced actin association with cell membranes and lipid rafts, further confirming the findings from stomatocytes. Calcium-induced vesiculation was found to be significantly enhanced from the stomatocyte as compared to the erythrocyte, with defective partitioning of the flotillin proteins into the vesicles. This suggests that stomatin may function as a negative regulator in this vesiculation, possibly due to its interaction with actin and that the flotillins may substitute for stomatin in this process within the stomatocyte. Mutating the principle cysteine residue for palmitoylation within stomatin caused the protein to show less affinity for the membrane and lipid rafts but an increased affinity for the nucleus. This suggests that palmitoylation of stomatin affects the affinity of stomatin for the membrane and that this modification may be involved in regulating the shuttling of stomatin between the plasma membrane and the nucleus. Prokaryotic stomatin exists in an operon with a serine protease, suggesting a functional link between the two. Using a reporter gene construct approach the potential for mammalian stomatin to be proteolytically processed was investigated. Stomatin was found to be proteolytically processed in the membrane by a serine protease with the subsequent release of a C-terminal fragment.
31
Conrad, Cathrin Sonja. "Polybutadien und Butadien enthaltende Copolymere mit gezielt eingebauten vulkanisierbaren Gruppen durch RAFT-Polymerisation." Doctoral thesis, Niedersächsische Staats- und Universitätsbibliothek Göttingen, 2013. http://hdl.handle.net/11858/00-1735-0000-0022-5E9E-D.
Full textAbstract:
Die RAFT-Polymerisation ("Reversible Addition-Fragmentation Chain Transfer") ist eine radikalische Polymerisation, die auf dem Prinzip des degenerativen Kettentransfers basiert. Es können Polymere hergestellt werden, die eine niedrige Dispersität aufweisen und komplexe makromolekulare Strukturen ausbilden. Für die Funktionalisierung von Polymerketten bietet sich die RAFT-Polymerisation ebenfalls an, da idealerweise jede auf diese Art hergestellte Polymerkette eine RAFT-Einheit trägt und so eine vollständige Funktionalisierung gewährleistet ist.
Im Fokus dieser Arbeit stand die Funktionalisierung von Polybutadien und 1,3-Butadien enthaltenden Copolymeren mit gezielt eingebauten schwefelhaltigen Gruppen.
Dabei wurden zwei verschiedene Ansätze verfolgt: Die α,ω-Funktionalisierung der Polymerketten mittels modifizierter RAFT-Agenzien sowie eine Funktionalisierung entlang der Polymerkette mit Hilfe von speziellen Monomeren. Da diese Polymere in technischen Anwendungen Verwendung finden sollen, standen einfache Synthesen, die sich gut auf den Technikums- und Industriemaßstab übertragen lassen, im Vordergrund.
Da es sich bei der RAFT-Einheit auch um eine schwefelhaltige Gruppe handelt, wurden Strategien zur Funktionalisierung der Abgangsgruppe erarbeitet und experimentell untersucht, um so ein α,ω-funktionalisiertes Polymer zu erhalten. Neben klassischen RAFT-Agenzien wurden auch neuartige Makro-RAFT-Agenzien verwendet, bei denen die schwefelhaltige Gruppe während einer Polymerisation in situ angebunden wird.
Darüber hinaus konnten erfolgreich Monomere synthetisiert werden, die wegen ihrer styrolähnlichen Struktur und der Ähnlichkeit der Monomere Styrol und 1,3-Butadien in ihrem Polymerisationsverhalten gut mit 1,3-Butadien copolymerisieren und dabei die schwefelhaltige Gruppe entlang der Polymerkette einbauen. Das Hauptaugenmerk weiterer Untersuchungen lag auf den Copolymerisationseigenschaften der Monomere. Dazu wurden umfangreiche Untersuchungen mit Styrol als Modellsystem für 1,3-Butadien durchgeführt und die gewonnenen Erkenntnisse in einer Copolymerisation der funktionalisierten Monomere mit 1,3-Butadien verifiziert.
Es konnte weiterhin gezeigt werden, dass sich schaltbare RAFT-Agenzien für die Synthese von Poly(butadien)-block-poly(vinylacetat) eignen, obwohl es sich um zwei Monomere mit stark unterschiedlichen elektronischen Eigenschaften handelt, die in einer konventionellen radikalischen Polymerisation kein Copolymer bilden würden. Aufgrund der Ähnlichkeit der Monomere Vinylacetat und Ethylen eröffnet dies neue Wege in der kontrollierten radikalischen Polymerisation von Polybutadien-block-polyethylen und erweitert so das Spektrum der unpolaren Monomere in der RAFT-Polymerisation zur Herstellung von Blockcopolymeren.
32
Seifert, Denis. "Synthese und Charakterisierung von sensitiven vernetzungsfähigen Blockcopolymeren mittels RAFT." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2005. http://nbn-resolving.de/urn:nbn:de:swb:14-1132231440987-09334.
Full textAbstract:
In vorangegangenen Arbeiten im eigenen Arbeitskreis wurden sensitive Hydrogelpartikel im mm- und μm-Bereich synthetisiert. Die Reaktion dieser Gele auf Änderung des einwirkenden Stimulus war jedoch nicht schnell genug für die gewünschten Anwendungen in Mikroventilen. Die verwendeten Polymere waren statistische Copolymere aus einem Chromophor (DMIAAm) und einem sensitiven Monomer (NIPAAm) und wiesen daher sehr breite Molmassenverteilungen auf. Mit Hilfe des Chromophores wurde es möglich, Hydrogele im Submikrometerbereich zu synthetisieren. Bei der Vernetzung dieser Polymere mit UVBestrahlung musste immer ein Tensid (SDS) zugesetzt werden, um die Bildung kleiner Aggregate zu unterstützen und gleichzeitig die Bildung großer zu unterdrücken. Ein solches Tensid kann die Anwendung dieser Hydrogele in bestimmten Bereichen, wie in der Medizin, verhindern. Es sollen daher tensidfrei Hydrogele synthetisiert werden. Für die Vernetzung sollte auf die photochemische Variante mit DMIAAm als Chromophor zurückgegriffen werden. Als Ausgangspolymere wären Di- bzw. Triblockcopolymere denkbar, die in wässriger Lösung zu einer Mizellbildung neigen. Aus den oben genannten Problemen ergab sich die folgende Zielstellung für die Arbeit. Es sollten sensitive Hydrogelpartikel erzeugt werden, die in der Lage sind, schnell auf eine Änderung der Temperatur zu reagieren. Eine kurze Reaktionszeit ist nur von Gelpartikeln mit kleinen Dimensionen im nm-Bereich zu erwarten. Weiterhin sollen diese Partikel mit einer Hülle umgeben werden, die für eine Stabilisierung sorgt und die Bildung größerer Aggregate unterbindet. Die Hülle muss so beschaffen sein, dass die Volumenänderung des sensitiven Blocks nicht beeinflusst wird. In dieser Dissertation wurde die kontrollierte radikalische Polymerisation von Acrylaten und Acrylamiden untersucht. Als Methode kam die Reversible-Addition-Fragmentation-chain-Transfer (RAFT) Polymerisation zum Einsatz. Die RAFT wurde gewählt, weil diese im Gegensatz zur ATRP metallionenfrei verläuft und die NMRP nicht für Acrylate geeignet ist. Bei den RAFT-Polymerisationen der verschiedenen Monomere wurden vier unterschiedliche Kettenüberträger verwendet (Schema 33) und folgende Ergebnisse erhalten. Als Lösungsmittel kam 1,4-Dioxan in den Polymerisationen zum Einsatz.
33
Yilmaz, Beren. "An Anlaytical And Experimental Study On Piled Raft Foundations." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12611500/index.pdf.
Full textAbstract:
Two different concepts and design procedures namely settlement reducing piles and piled raft foundations have been studied independently in this thesis.
A laboratory study is conducted on model rafts with differing number of model settlement reducing piles. Pile length, pile diameter, type of soil and size of raft are kept constant and settlements are measured under sustained loading. Remolded
kaolin is consolidated under controlled stresses before tests are performed in model boxes. The tests are conducted under two sustained loadings of 75 kPa and 40 kPa. 0(raft), 16 and 49 number of piles are used. During the tests, all of the skin friction is mobilized. Several tests are conducted for each combination to see the variability. It is concluded that increasing the pile number beyond an optimum value is inefficient as far as the amount of settlement is considered. Also an analytical procedure has been followed to calculate settlements with increasing number of piles. In the second part of this thesis, finite element analyse have been performed on a piled raft foundation model, using Plaxis 3D Foundation Engineering software. This analyse are supported with analytical methods. The piled raft model is loaded with
450 kPa raft pressure. The studies are conducted in two sets in which different pile lengths are used25 m and 30 m respectively. The numbers of piles are increased from 63 to 143. All other parameters are kept constant. The results showed that again an optimum number of piles will be sufficient to reduce the settlement to the acceptable level. The analytical methods indicate a similar behavior. The comparison and results are presented in the study.
34
Peng, Wentao [Verfasser]. "Binary Planet–Satellite Nanostructure Using RAFT Polymer / Wentao Peng." Göttingen : Niedersächsische Staats- und Universitätsbibliothek Göttingen, 2020. http://d-nb.info/1234846802/34.
Full text
35
Giannopoulos, Konstantinos. "Numerical analysis of the reuse of piled raft foundations." Thesis, Imperial College London, 2011. http://hdl.handle.net/10044/1/9101.
Full textAbstract:
This thesis considers the reuse and the optimum design of piled raft foundations using numerical analysis. The solution proposed for reusing foundations is the design of a piled raft foundation capable of supporting successive buildings. A raft foundation, with a limited number of piles located strategically beneath the raft and utilising a high proportion of the ultimate load capacity, is considered the most efficient design when the raft foundation alone provides sufficient load capacity, but at the same time settlements are excessive. This is the case in high plasticity stiff clays such as London Clay. When building on old piles, these piles had to sustain a certain load from the previous structure over a period of time, during which the soil is subjected to the time-related processes of consolidation and creep. A time dependent constitutive model, capable of reproducing several aspects of the time dependent behaviour of soils including creep and isotach viscosity, is employed in the finite element analyses. The model parameters are calibrated with the results of laboratory tests on London Clay, whose time dependent behaviour in its natural state is characterised by isotach viscosity, rate dependent peak strength and rate independent critical state line. Preliminary analyses of single piles indicate that the consolidation processes in the ground result in little gain in capacity in the long term, whereas creep results in increased capacity. A back-analysis of documented piled load tests in London Clay is performed, where the effects of pile installation are quantified. Numerical model calibration is performed with the documented observations of a well instrumented piled raft foundation at Stonebridge Park, London. 3D parametric analyses of piled raft foundations are then performed, in order to assess the appropriate location and dimensions of piles and raft thickness. The performance of piled raft foundations with time is assessed parametrically at different levels of preloading. Optimisation of the performance of the piled raft foundation at Stonebridge Park is attempted by examining several pile arrangements, where a central pile support with a limited number of piles is more cost-effective than the original design.
36
Bowes, Angela. "Novel synthesis of block copolymers via the RAFT process." Thesis, Link to the online version, 2007. http://hdl.handle.net/10019/976.
Full text
37
Johnson, Iain Joseph. "Synthesis and characterisation of polymeric materials via RAFT polymerisation." Thesis, Durham University, 2013. http://etheses.dur.ac.uk/8452/.
Full textAbstract:
Well-defined polymeric materials incorporating N-vinylpyrrolidone (NVP), vinyl acetate (VAc) and / or N-vinylcaprolactam (NVCL) were synthesised using reversible addition fragmentation chain transfer (RAFT) polymerisation. Chapter 1 is a general introduction on controlled / living radical polymerisation methods, in addition to a brief background on poly(N-vinylpyrrolidone) (PNVP), poly(vinyl acetate) (PVAc) and poly(N-vinylcaprolactam) (PNVCL). Chapter 2 describes the synthesis of RAFT agents (RAFT agents 1-7) used within this study comprising either a dithiocarbamate (RAFT agent 1) or xanthate (RAFT agents 2-7) structure. Several novel RAFT agents with pyrrolidone functionality and based on xanthates (RAFT agents 4-7) were synthesised to improve the RAFT polymerisation of “less activated” monomers (LAMs). Furthermore, multi armed RAFT agents (RAFT agents 9-11) based on xanthates were also synthesised with the aim of generating star-like polymeric structures incorporating LAMs. 1H and 13C nuclear magnetic resonance (NMR) spectroscopy methods were used to characterise the RAFT agents synthesised. Chapter 3 involves the use of RAFT agents 1-8, to mediate the polymerisation of NVP, VAc and NVCL in order to synthesise linear homopolymers with controlled molecular weight and narrow PDI. The kinetics of NVP RAFT mediated polymerisations using novel RAFT agents 5-7 were also investigated and showed that the polymerisations had controlled / living characteristics. Furthermore, the effect of having either primary, secondary or tertiary R groups was explored, for the controlled polymerisation of NVP. RAFT agent 4 which incorporates a primary R group was found to be ineffective in controlling the polymerisation of NVP, whereas RAFT agents with a secondary or tertiary R groups were found to be effective. The resulting polymers were characterised by 1H NMR spectroscopy and size exclusion chromatography (SEC). Chapter 4 focuses on the synthesis of linear block and novel random copolymers incorporating various combinations of PNVP, PVAc and PNVCL. PNVP macroCTA’s (12-14) were used to synthesise PNVP-block-PVAc and PNVP-block-PNVCL, whereas PVAc macroCTA’s (15-17) were used to synthesise PVAc-block-PNVP and PVAc block-PNVCL. Bimodal molecular weight distributions were observed in all the block copolymers synthesised. Novel linear PNVP ran PVAc, PNVCL ran PVAc and PNVP-ran-PNVCL were also synthesised in the presence of RAFT agent 5, with monomodal molecular weight distributions and narrow PDI’s. Chapter 5 describes the synthesis of more complex polymeric structures using multi-armed RAFT agents prepared in Chapter 2 (RAFT agents 9-11). A “core first” R group approach was implemented instead of a “core first” Z group approach to synthesise the polymeric stars, in order to maintain the integrity of the star structure. NVP, VAc and NVCL were polymerised via RAFT in the presence of RAFT agents 9 11, to synthesise Star 1-6. PNVP and PVAc three and four armed stars (Star 1-4) were found to exhibit monomodal molecular weight distributions and low PDI. However, PNVCL three and four armed stars (Star 5 and 6) were found to show bimodal molecular weight distributions. Star 3 (4 arm star of PNVP) and Star 4 (4 arm star of PVAc) were then subsequently used as star macroCTA’s and chain extended with NVP, VAc and NVCL to synthesise novel Star-block 1-4. Star block copolymers were found to either have broad or bimodal molecular weight distributions. In addition, novel three and four armed star random copolymers (Star-random 1-6) were also synthesised via RAFT using RAFT agents 9 and 11, respectively. All Star-random copolymers were observed to have monomodal molecular weight distributions and narrow PDI. Chapter 6 investigates the temperature responsive behaviour of polymeric materials containing NVCL using UV-Visible spectroscopy and optical microscopy. PNVCL synthesised via conventional free radical polymerisation, with a Mn of 9.97 x 104 gmol-1, was found to exhibit an LCST at 33°C. In comparison, linear PNVCL samples prepared via RAFT polymerisation, with Mn ranging from 1.02 x 104 to 2.62 x 104 gmol-1 were observed to exhibit higher LCST’s in the region of 38-40°C. This suggests that the LCST of PNVCL is dependent on the polymer chain length; i.e. “classical” (Type 1) Flory Huggins behaviour. Furthermore, PNVCL synthesised using RAFT agents 2-5 exhibited LCST’s in the region of 39-40°C, which is known as fever temperature. Novel linear PNVCL-ran-PNVP, PNVCL-ran-PVAc and Star-random 2, 3, 5-6 were also analysed to determine their temperature responsive behaviour. The introduction of a hydrophobic (PVAc) and hydrophilic (PNVP) entities into PNVCL is shown to significantly decrease and increase the LCST, respectively. Comparison of the LCST transition range for PNVCL-ran-PVAc synthesised via RAFT and conventional FRP, indicated that the former showed a much narrower transition. Novel Star-random 5 and 6 (four armed random copolymers) were found to have a lower LCST compared to Star random 2 and 3 (three armed random copolymers) despite having similar monomer compositions. A thermal hysteresis was found to be present in all polymer samples, which was attributed to the possibility of weak cross-linking interactions between water molecules and PNVCL carbonyl groups. Chapter 7 is a general conclusion of the work discussed in Chapters 1-6 and future work.
38
Sasso, Barbara. "Synthesis of ω-end functional polymers by raft polymerization." Thesis, University of Manchester, 2008. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.492065.
Full text
39
CUNATI, DIANA. "Ruolo dei lipid raft nel metabolismo della proteina prionica." Doctoral thesis, Università degli Studi di Milano-Bicocca, 2011. http://hdl.handle.net/10281/27001.
Full textAbstract:
The prion protein (PrP) is a GPI-anchored protein primarily concentrated in neuronal cells. Under certain conditions, the innocuous cellular form of this protein, PrPC, can convert into the lethal scrapie isoform, PrPSc, which can aggregate with other PrP molecules and exert its neurotoxic activity.
The structure of PrPC consists of two domains: an N-terminal, glycosylated, flexible disordered domain which is capable of binding copper and a C-terminal α-helical domain.
In contrast, PrPSc is enriched in β-sheet structures and characterized by its poor solubility in non-denaturing detergents, propensity for aggregation, partial resistance to proteinase K digestion.
The conversion of PrPC into PrPSc occurs in particular regions of the cell membrane, enriched with cholesterol and glycosphingolipid, called lipid rafts; these microdomains are thought to play a crucial role both in physiological functions and in the alternative folding of the prion protein.
In addition, it’s known that:
-PrPC can be cleaved at the 110/111 peptidyl bond to produce a C-terminal fragment, C1, which remains membrane bound and a N-terminal fragment, N1, released in the extracellular space. C1 fragments can’t be converted to the scrapie isoform;
- in cell cultures, ADAM10 and ADAM17 were shown to be responsible for this processing and their activation seems PKC-dependent.
The aim of our project is to establish if the alteration of cell lipid composition can modify the membrane distribution of the prion protein within rafts or non-raft regions and promote the activity of disintegrins such as ADAM10/17 upon the prion protein.
For this reason, granule cells, from the cerebella of 8-day-old rats, were incubated after 8 days in culture with GM1 or GD1a or GT1b for 4 hours at 37°C or with GM1 for 4 hours at 4°C. Detergent resistant fractions, containing lipid rafts, were isolated and proteins in all gradient fractions were separated and analyzed by EF/WB with specific antibodies.
After cell treatments with exogenous gangliosides, a good percentage of them was found in lipid rafts; immunoblotting analysis with specific antibodies showed a significant reduction in the amount of proteins, normally localized in lipid rafts, after incubation with GT1b.
The incorporation of this ganglioside, characterized by a remarkable steric encumbrance, might be responsible for lipid rafts destabilization and proteins redistribution toward non-raft regions.
Another possibility is that GT1b incorporation reduces the number of lipid rafts on the cell membrane.
Immunoblotting analysis with three different anti-PrP antibodies showed that this protein is not selectively located in lipid rafts but it is also distributed in several intracellular compartments.
Cell treatments with GM1 or GD1a at 37°C for 4 hours were not able to promote PrPC cleavage at the 110/111 peptidyl bond; cell incubation with GM1 seemed able to induce a conformational change of the prion protein toward a “simil-scrapie” isoform, partially resistant to classical denaturation protocols. Further studies are in progress to fully demonstrate that GM1-PrP interaction results in this conformational change.
40
Nguema, Edzang Ronald W. "Synthèse et caractérisation de polymères à propriétés rédox pour un contrôle des propriétés d'adhésion bactérienne." Thesis, Toulon, 2016. http://www.theses.fr/2016TOUL0006/document.
Full textAbstract:
En raison des propriétés redox réversibles du ferrocène et de son activité antibactérienne, les polymères à base de ferrocène sont intéressants pour synthétiser de nouveaux liants pour des revêtements anti-adhésifs bactériens. Cette étude rend compte de l’homopolymérisation et de la copolymérisation de monomères méthacryliques porteurs de groupes ferrocényles avec le méthacrylate de lauryle (LM). Le méthacrylate de méthylferrocène (FMMA) mais aussi quatre nouveaux monomères nommés méthacrylate de 2- ferrocénylméthoxyéthyle (FMOEMA), méthacrylate de 3-ferrocénylméthoxypropyle (FMOPMA), 4- ferrocénylméthoxybutyle (FMOBMA) et de 2-ferrocénylméthoxyméthyléthyle (FMOMEMA) ont d’ bord été synthétisés et ensuite polymérisés via le procédé RAFT. Les cinétiques ’homopolymérisation ont été étudiées par RMN 1H in situ. La polymérisation a été contrôlée en utilisant le 2-cyanoprop-2-yl dithiobenzoate (CPDB) comme agent de transfert de chaîne, à 70°C, dans le toluène deutéré. Ces monomères contenant le groupement ferrocényle se sont révélés très réactifs via le procédé RAFT, conduisant à des conversions de 96% et à des polymères de faibles indices de polymolécularité (Ð<1,6). La conversion des monomères suit une cinétique de premier ordre (jusqu’à 80%) avec une augmentation linéaire de la masse molaire en fonction de la conversion en monomère. En utilisant le monomère FMMA comme référence, l’ spacement entre la partie polymérisable et le groupement ferrocényle a été augmenté pour le FMOEMA, FMOPMA, FMOMEMA et FMOBMA afin d’ méliorer la mobilité des groupements latéraux. Cette mobilité se traduit par une diminution notable des températures de transition vitreuse des homopolymères entre le pFMMA et le pFMOBMA. De plus, les copolymères diblocs préparés par voie séquencée présentent deux températures de transition vitreuse spécifiques à chaque bloc, démontrant une incompatibilité de ces derniers. Les propriétés électrochimiques des monomères et celles des polymères ont été caractérisées par voltampérométrie cyclique. Enfin, les propriétés anti-adhésives de ces homopolymères et copolymères diblocs vis-à-vis d’une bactérie marine ont été évaluéesDue to the reversible redox properties of ferrocene and its antibacterial activity, ferrocenyl-based polymers are useful for the synthesis of new anti-adhesive binders for marine antifouling coatings. This study reports the homopolymerization and copolymerization with lauryl methacrylate of ferrocenyl-based methacrylic monomers. Ferrocenylmethyl methacrylate (FMMA) as well as four novel monomers, namely 2- (ferrocenylmethoxy)ethyl methacrylate (FMOEMA), 3-(ferrocenylmethoxy)propyl methacrylate (FMOPMA),4-(ferrocenylmethoxy)butyl methacrylate (FMOBMA) and 2-(ferrocenylmethoxy)methylethyl methacrylate (FMOMEMA) were first synthesized, and subsequently polymerized by the RAFT process. The homopolymerization kinetics were investigated by in situ NMR. The radical polymerization was controlled by using 2-cyanoprop-2-yl dithiobenzoate (CPDB) as a chain transfer agent, at 70 °C in deuterated toluene. These monomers containing a ferrocenyl moiety with alcoxy linkers were found to be as reactive as FMMA in RAFT polymerization, resulting in conversions of 96% and in polymers with low dispersities (ÐM < 1.6). Monomer conversion follows a first order kinetics (up to 80%) with a linear increase in the molecular mass as a function of the monomer conversion. By using the FMMA monomer as a reference, the length of the alcoxy linker between the ferrocene unit and the backbone was increased for FMOEMA, FMOPMA, FMOMEMA and FMOBMA to improve the mobility of the side groups. This increase in macromolecular mobility led to a significant decrease of glass transition temperatures of the homopolymers. In addition, diblock copolymers exhibited two glass transition temperatures indicating that the two blocks are incompatible. The electrochemical properties of the monomers and those of the polymers were characterized using cyclic voltammetry. Finally, the anti-adhesive properties of these homopolymers and diblock copolymers toward marine bacteria were evaluated
41
Özyürek, Zeynep. "Thermoresponsive Glycopolymers via Controlled Radical Polymerization (RAFT) for Biomolecular Recognition." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2007. http://nbn-resolving.de/urn:nbn:de:swb:14-1190291104620-73670.
Full textAbstract:
Stimuli responsive polymers (SRP) have attracted a lot of attention, due to their potential and promising applications in many fields, as protein-ligand recognition, on-off switches for modulated drug delivery or artificial organs. Poly(N-isopropylacrylamide) (PNIPAM) is one of the most widely studied polymers due to its lower critical solution temperature (LCST) at ~ 32° C in aqueous solution. Additionally, glycopolymers, where free sugar units are present, have potentially interesting applications especially in bio-recognition where sugars play an important role. In this work, our interest was focused on the synthesis of glycomonomers and its block- and random- copolymers with NIPAM. NIPAM homopolymers with an active chain transfer unit at the chain end could be prepared by RAFT. They were used as macro-chain transfer agents to prepare a variety of sugar containing responsive block copolymers from new glycomonomers by the monomer addition concept. The LCSTs of the aqueous solutions of the copolymers are affected strongly by the comonomer content, spacer chain length of the glycomonomer and the chain architecture of the copolymers. These polymers were coated on a solid substrate by spin coating and crosslinked by plasma immobilization. Characterization of the polymers was performed by nuclear magnetic resonance spectroscopy (NMR), ultraviolet (UV), dynamic light scattering (DLS, detection of aggregation behaviour) and gel permeation chromatography (GPC). Polymer films were investigated by ellipsometry, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) regarding their surface properties. Afterwards sulfation of sugar – OH groups was performed in order to obtain heparin like structure, as heparin exhibits numerous important biological activities, like good interaction with diverse proteins. Finally, affinity of the polymers (sulfated and non sulfated form) on a solid support to the endothelial cells was investigated.
42
Fatemi-Ardakani, B. "A contribution to the analysis of pile-supported raft foundation." Thesis, University of Southampton, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.379319.
Full text
43
Akrach, Majda. "Carbon black dispersion using polymeric dispersants prepared via raft polymerisation." Thesis, University of Warwick, 2012. http://wrap.warwick.ac.uk/103089/.
Full textAbstract:
The aim of this thesis is the investigation of the use of a RAFT agent developed by the company Lubrizol, BMDPT (Butyl-2-methyl-2-[(dodecylsulfanylthiocarbonyl) sulfanyl] propionate) produced in tonnes scale to make amphiphilic block copolymers in ester solvent (butyl acetate and methoxypropyl acetate). For this purpose, a broad range of monomers including acrylate, methacrylate and styrenic containing tertiary amine were polymerised and used as pigment dispersants. As the starting point, the reactivity of n-butyl acrylate (n-BA) and di(methyl)aminopropyl acrylate (DMAEA) monomer followed by the synthesis of acrylate diblock copolymers in acetate solvents (butyl acetate and methoxypropyl acetate) are investigated. The second chapter is focused on the methacrylate polymerisation which is a large body of work of this thesis. The poor reactivity of the trithiocarbonate RAFT agent towards methacrylate monomer was already published few times. Consequently, the kinetic studies of butyl methacrylate (BMA) and di(methyl)amino ethyl methacrylate (DMAEMA) was investigated in batch mode. Subsequently, a new synthetic route is explored to reach a well-controlled diblock copolymers. In the third chapter, a novel class of amphiphilic diblock copolymer containing acrylate and a mixture of styrene and maleic anhydride is explored. Then, the functionalisation of polymer backbone is carried out by using an amine in order to insert an anchoring group for pigment affinity. Finally, the efficiency of all the diblock copolymers on carbon black pigment dispersion is reported. A combination of different techniques such as dynamic light scattering (DLS), transmission electronic microscopy (TEM) and thermogravimetric analysis (TGA) are used to investigate the interaction between the polymer and the pigment.
44
Eksteen, Zaskia-Hillet. "Hybrid hydrogels based on RAFT mediated poly(N-vinyl pyrrolidone)." Thesis, Stellenbosch : University of Stellenbosch, 2009. http://hdl.handle.net/10019.1/4822.
Full textAbstract:
Thesis (MSc (Chemistry and Polymer Science))--University of Stellenbosch, 2009.Thesis submitted in partial fulfilment for the degree of Master of Science (polymer science) at Stellenbosch University
ENGLISH ABSTRACT: The goal of this study was to synthesize hybrid hydrogels via a chemical crosslinking mechanism through use of chain end functional poly(N-vinyl pyrrolidone)(PVP) with various topologies. The crosslinking chemistries should be benign in nature i.e. at physiological pH ranges and at 37 °C. The degradation products should be biologically tolerable and renal clearance should be possible (< 30 000 g/mol PVP0. PVP of various topologies, controlled molar mass and quantitative chain end functionality was obtained via Reversible Addition Fragmentation chain Transfer (RAFT) mediated polymerization (PDI = 1.1- 1.4). The synthesized polymers were chain end functionalized to introduce thiol or aldehyde moieties. Thiol chain ends were obtained through post polymerization modification of xanthate functional PVP with either aminolysis or reduction. The aldehyde moiety was obtained by post polymerization modification of xanthate end functional PVP with sequential hydrolysis and thermolysis. Thiol functional four arm star PVP was reacted with acrylate difunctional poly(ethylene glycol) (DIAC PEG) crosslinker under standard Michael addition conditions. In order to obtain thioether crosslinked hydrogels from tetra functional star PVP molecules it was found that a minimum thiol functionalization of 30% and a molar ratio of acrylate:thiol of 1:1.1 is required. The Schiff base reaction was used to synthesize imine or secondary amine (after reduction) crosslinks with the lysine residues on either lysozyme or bovine serum albumin (BSA) or the primary amines of bis-(2-amino ethyl)amine). Hydrogels were obtained from aldehyde functionalized PVP molecules with a fraction of functional aldehyde chain ends of 0.88 for difunctional molecules and 0.50 for tetra functional star PVP molecules with lysozyme or BSA crosslinkers. The reaction rate was favoured by lowered pH (<6.0) and an optimum molar ratio of amine : aldehyde of 1:0.8. Hydrogels were analyzed by equilibrium swelling calculations to determine the molar mass between crosslinks and the estimated pore size. In both crosslinking systems the properties of the formed hydrogels were seen to be affected by molar ratio used and by the topology of the crosslinking agent. PVP BSA and PVP PEG hydrogels were tested for 24 h and 48 h cell viability by using H9C2 myoblast cells. A concentration range of 0.25 x 10(2) to 0.01 g/mL was studied. Cell mortality was tested by Trypan blue staining and results were verified with MTT assay. A very low cell death precentage (<37%)was observed. Cells even appeared to experience a stimulatory effect after 48 h of exposure at low concentrations of PVP PEG hydrogel treatments. The properties of the formed hydrogel could be tuned by the molar mass ratios of PVP and crosslinker. The functionality of the crosslinker directly affects the molar mass between crosslinks and thus indirectly the degradation profile. It was concluded that PVP molecules with various topologies, well-defined molar masses and chain end functionality could be obtained via RAFT mediated polymerization. Obtained polymers were successfully modified and crosslinked to obtain hydrogels with stoichiometrically tuneable properties i.e. initial swelling ratio, degradation time, molar mass between crosslinks. The hydrogels had very positive cell viability results that would definitely justify further research into these materials as “tissue-mimetic” materials.
AFRIKAANSE OPSOMMING: Die doel van die studie is om poli(N-viniel pirollidoon) (PVP) gebaseerde hibried hidrogelle te sintetiseer deur middel van kovalente kruisbindings met toepaslike kruisverbinder molekules. Die chemiese reaksies betrokke in die vorming van hierdie kovalente kruisbindings moet gematig van aard wees, by fisiologiese pH en by 37 °C plaasvind. Die degradasieprodukte van die hibried-hidrogel moet biologies verdraagsaam en ook uitskeibaar deur die endokrinologiese sisteem wees. PVP van verskillende topologieë, beheerde molêre massa en kwantitatiewe kettingendfunksionaliteit is berei deur ‘n omkeerbare addisie-fragmentasiekettingoordrag (OAFO)-beheerde polimerisasieproses (PDI = 1.1-1.4). Xantaat-kettingend-PVP is aangepas na thiol of aldehied kettingendfunksies. Thiolendfunksies is verkry deur middel van ‘n aminolisasie-reaksie. Xantaat kettingend-PVP is stapsgewys gemodifiseer deur hidroliese en verhittingstappe om die aldehied ketting-endfunksionaliteit te bekom. Thiol ketting-endfunksionele vier-armige ster-PVP is kovalent gebind aan difunksionele poly(etileen glikol) deur middel van die Michael-addisiereaksie. PVP PEG hidrogelle het slegs gevorm met vier-armige ster-PVP molekules wat oor ‘n minimum van 30 % thiol-funksionaliteit beskik het en ‘n optimale molêre massa verhouding van 1:1.1 vir ankrilaat to thiol. Die Schiff-basisreaksie is gebruik om hidrogel te sintetiseer wat met imiene of amiene (na redusering) kovalente bindings gekruisbind is. In hierdie sisteme het hidrogel slegs gevorm as die aldehied-PVP molekules oor ‘n fraksie funksionele kettingend-waarde van 0.88 vir dialdehied-PVP molekules en 0.5 vir vier armige ster-PVP molekules beskik het. Die reaksie snelheid van die Schiff-basis kovalente bindings is bevoordeel deur die pH te verlaag (≤ 6.0) en ‘n gunstige molêre massa verhouding van 1:0.8 vir die nukleofiel teen oor die akseptor molekule is waargeneem. Ewewigswel berekeninge is gebruik om die molêre massa tussen kruisbindings en die gemiddelde benaderde porieë binne die drie-dimensionele interne struktuur van die hydrogel te bepaal. Die seltoksisiteit van PVP-BSA en PVP-PEG hidrogelle is oor 24 h en 48 h in die teenwoordigheid van H9c2 mioblast-selle getoets. Die hydrogel behandelings is uitgevoer in ‘n konsentrasie reeks van 0.25 x 10(2) tot 0.01 g/mL. Selmortaliteit is getoets deur ‘n Trypan-blou verkleuringstudie. Hierdie resultate is ondersteun deur MTT sel-lewensvatbaarheidstoetse. ‘n Lae selmortaliteit (≤ 37 %) is waargeneem en, opspraakwekkend, het van die selle na 48 h verhoogde vitaliteit getoon in die teenwoordigheid van lae konsentrasies PVP-PEG hidrogelle. Dit is bevind dat hidrogel eienskappe deur stoichiometriese molêre massa verhoudings asook die keuse in die topologie van kruisverbinder beïnvloed word. Hierdie eienskappe het ‘n direkte effek op die degradasieprofiel van die gevormde hidrogel. Samevattend dus is PVP molekules met ‘n variasie van topologieë, spesifieke molêre massas en kettingfunksionalitete deur middel van OAFO-gemedieerde polimerisasies gesintetiseer. Xantaatkettingendfunksionele PVP-molekules kon suksesvol omgeskakel word na die kettingendfunksionaliteit van ons keuse om ‘n hibriedhidrogel met stoichiometries-manupileerbare eienskappe te sintetiseer. Die positiewe sel-lewensvatbaarbheidstudie resultate staaf verdere ondersoeke in hierdie PVPgebaseerde hibried hidrogelmateriaal as ‘n weefsel nabootsingsmateriaal.
45
Möhrke, Julia. "Kinetik der konventionellen radikalischen und der RAFT-Polymerisation an Nanopartikeloberflächen." Doctoral thesis, Niedersächsische Staats- und Universitätsbibliothek Göttingen, 2016. http://hdl.handle.net/11858/00-1735-0000-0028-87D3-9.
Full textAbstract:
Diese Arbeit gibt neue Einblicke in die kinetischen und mechanistischen Aspekte der konventionellen radikalischen und der Reversible-Addition–Fragmentation-chain-Transfer- (RAFT-)Polymerisation von der Oberfläche von Silica-Nanopartikeln.
Die Terminierungskinetik der oberflächeninitiierten Polymerisation von n-Butylmethacrylat (n-BMA) wurde mit Hilfe der Single-pulse–pulsed-laser-Polymerisation (SP–PLP) in Kombination mit der Elektronenspinresonanzspektroskopie (ESR-Spektroskopie) analysiert. Die Polymerisation wurde dabei durch den neu entwickelten oberflächengebundenen Photoinitiator 2,2-Dimethoxy-2-phenyl-1-(2-(2-(trimethoxysilyl)-ethyl)phenyl)-1-on (DMPTS) initiiert. Die erhaltenen Geschwindigkeitskoeffizienten der Terminierung kt, die ausschließlich der Terminierungsreaktion zwischen zwei oberflächengebundenen Radikalen zugeordnet werden konnten, waren signifikant kleiner als die Literaturwerte für das entsprechende homogene Polymerisationssystem. Erstaunlicherweise konnte außerdem keine Kettenlängenabhängigkeit von kt gefunden werden. Dies zusammen mit der Tatsache, dass bei temperaturabhängigen Untersuchungen eine Aktivierungsenergie für kt gefunden wurde, die in exzellenter Übereinstimmung mit der des Propagationsgeschwindigkeitskoeffizienten von n-BMA ist, lässt das Bild einer reaktionsdiffusionskontrollierten Terminierung oberflächengebundener Makroradikale entstehen.
Die Entwicklung des oberflächengebundenen Photoinitiators DMPTS erlaubte weiterhin neue Einblicke in die Propagationskinetik – insbesondere deren Temperaturabhängigkeit betreffend – oberflächengebundener Makroradikale. Mittels der PLP von n-BMA in Kombination mit der Größenausschlusschromatographie (engl. size-exclusion chromatography, SEC) wurden Werte für den Geschwindigkeitskoeffizienten der Propagation kp und die entsprechende Aktivierungsenergie ermittelt, die exzellent mit den Daten der International Union of Pure and Applied Chemistry (IUPAC) für die Polymerisation von n-BMA in homogenem Reaktionsmedium übereinstimmen, sodass kein Einfluss der Oberflächenverankerung der Makroradikale auf die Propagationskinetik ersichtlich ist.
Weiterhin wurde die Kinetik der RAFT-Polymerisation von n-Butylacrylat (BA) von Oberflächen bei –40 °C mit Hilfe verschiedener ESR-spektroskopischer Methoden für den R- und den Z-Gruppen-Ansatz unter Verwendung oberflächengebundener Trithiocarbonate als RAFT-Agenzien untersucht.
Die kinetischen Analysen des R-Gruppen-Ansatzes mittels stationärer ESR-Experimente lieferten Gleichgewichtskonstanten Keq, die um eine Größenordnung kleiner sind als die Literaturwerte für entsprechende homogene Polymerisationssysteme, was darauf hindeutet, dass die Oberflächenverankerung des RAFT-Agens einen signifikanten Einfluss auf die Kinetik der RAFT-Polymerisation hat. Durch die Aufnahme zeitlicher Konzentrationsverläufe der Intermediatspezies und der propagierenden Radikale nach Einzelpulsinitiierung mittels der hochaufgelösten zeitabhängigen ESR-Spektroskopie (SP–PLP–ESR–RAFT) in Kombination mit PREDICI®-Simulationen wurden diese Ergebnisse bestätigt, da eine Abnahme des Geschwindigkeitskoeffizienten der Addition eines Makroradikals an die RAFT-Gruppe mit zunehmender Anzahl beteiligter oberflächengebundener Makromoleküle gefunden wurde. Dieser Befund ist im Einklang mit der Vorstellung, dass die Additionsreaktion bei Beteiligung verankerter Makromoleküle diffusionskontrolliert abläuft, was auf die unterdrückte Translations- und die eingeschränkte Segmentdiffusion oberflächengebundener Polymerketten zurückzuführen ist.
Ein noch kleinerer Wert von Keq wurde für den Z-Gruppen-Ansatz gefunden und kann darauf zurückgeführt werden, dass die in Lösung wachsenden Ketten für die Additionsreaktion mit der RAFT-Gruppe, die sich über den gesamten Verlauf der Polymerisation in unmittelbarer Nähe zur Partikeloberfläche befindet, durch die Polymerschicht auf der Oberfläche diffundieren müssen. Die Wahrscheinlichkeit dafür, dass eine Additionsreaktion stattfindet, nimmt mit zunehmender Polymerschichtdicke ab, was durch einen kleineren Wert von Keq bei Verwendung von einem RAFT-Agens, das über die Z-Gruppe verankert war und über eine makromolekulare anstatt einer niedermolekularen R-Gruppe verfügte, gezeigt werden konnte.
Die vorgestellten Ergebnisse geben einen umfangreichen Überblick über den Einfluss der Oberflächenverankerung von Komponenten, die am Prozess der radikalischen Polymerisation beteiligt sind, auf die Kinetik der oberflächeninitiierten radikalischen Polymerisation und ebnen den Weg für detaillierte, systematische Untersuchungen der Zusammenhänge zwischen der Kinetik von radikalischen Polymerisationen an Oberflächen und der molekularen Struktur der erhaltenen oberflächengebundenen Polymere.
46
Smith, Steven Oliver. "Raft : automated techniques for diagnosing, reproducing, and fixing concurrency bugs." Thesis, University of Cambridge, 2014. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.648869.
Full text
47
Zargar, Amin. "Sequence modeling of raft polymerizations with the method of moments." College Park, Md.: University of Maryland, 2008. http://hdl.handle.net/1903/8782.
Full textAbstract:
Thesis (M.S.) -- University of Maryland, College Park, 2008.Thesis research directed by: Dept. of Chemical and Biomolecular Engineering. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.
48
Garcia, Oscar. "Rafue Ite! Ethnographie d’un bal rituel amazonien (Murui-Muina-Uitoto, Amazonie colombienne)." Thesis, Paris Sciences et Lettres (ComUE), 2018. http://www.theses.fr/2018PSLEH178.
Full textAbstract:
Cette thèse explore les cérémonies composant les bals rituels des Murui-Muina (Uitoto), peuple indien établi dans le Nord-Ouest amazonien, dans la région du Moyen Caquetá (Colombie). Il s’agit d’une analyse consacrée au chamanisme de ce groupe, conduite à partir d’une étude ethnographique du bal de Yuakɨ (ou bal de fruits).L’objectif principal consiste à démontrer que lors du bal de Yuakɨ plusieurs groupes patrilinéaires reliés par des rapports d’altérité se rassemblent pour agir en vue de la guérison et de l’aménagement de l’environnement. Composée de deux volumes (quatre parties), où le premier est consacré aux aspects généraux du chamanisme murui-muina et le deuxième aux rituels composant le bal de Yuakɨ, la thèse analyse les aspects cosmologiques, les procédures rituelles et les enjeux relationnels qui expliquent le comportement des participants de ce rituel. Cette recherche s’appuie sur plusieurs travails de terrain permettant d’analyser des discours anciens transmis d’âge en âge : durant les cérémonies et les narrations mythiques, des discours quasi secrets tels que le bakakɨ ou le zomarafue sont prononcés. Cette étude propose une synthèse et une réinterprétation de l’ethnographie Murui-Muina.Ainsi se dessine un modèle écologique dans lequel la vie est envisagée comme une lutte incessante entre groupes d’humains et de non-humains, régulée par des normes telles que l’interdiction de l’endocannibalisme et la permission de la vengeance comme seule violence légitime. Ces groupes, placés sous l’autorité d’entités « maîtres », composent un monde vivant où les humains doivent souvent négocier leur vie avec tous les êtres de leur environnement (animaux, plantes, minéraux etc.) À travers une approche relationnelle du rite, la thèse met en évidence les caractéristiques fondamentales des bals rituels murui-muina. Cette recherche rapporte et analyse, pour la première fois, la stratégie mnémotechnique utilisée par les Murui-Muina durant ces pratiques cérémonielles. La thèse donne une place privilégiée à la danse rituelle en devenant l’une des rares contributions à ce sujet en Amazonie. Il s’agit donc d’une contribution à l’anthropologie de la nature aussi bien qu’à l’anthropologie de la mémoire et à l’anthropologie de la danseThis thesis is dedicated to the ritual balls (ritual dances) of the Murui-Muina (also called Uitoto), a people from the North-West area of the Amazon forest (from the region of the Medio-Caquetá). It is an analysis of the different rites that make up the dances and the shamanism of the Murui-Muina, based on an ethnographic study e of the "Yuakɨ Ball" (or "Ball of the Fruits").This research shows that the Yuakɨ Ball is an event that brings together different patrilineage groups and aims at managing the environment surrounding the society and healing from epidemics. The thesis is composed of four parts, divided into two volumes. The first volume is dedicated to murui-muina shamanism and the second to Yuakɨ's ball. In the two volumes, cosmology, ritual procedures and the relationships between those participating in the dances are studied. This analysis is based on an ethnographic study but also on ancient oral traditions, transmitted from one historical period to the next one and told during mythical ceremonies and narrations, such as the bakakɨ and the zomarafue. The existing ethnography on the Murui-Muina will thus be reunited, reinterpreted and compared to the new data collected.In the ecological model of this people, which emerges from this thesis, life is conceived as an incessant struggle between human and non-human groups, regulated by norms such as the prohibition of endo-cannibalism or the revenge (the only legitimate violence). Human and non-human groups are placed under the authority of "Master" spirits and human beings must negotiate their lives with other beings who inhabit their environment (animals, plants, minerals, etc.). This research also shows the mnemonic strategy used by Murui-Muina during the rites studied and wants to be one of the rare contributions to the study of ritual dance in the Amazon area. It is therefore a study that combines anthropology of nature, anthropology of memory and anthropology of dance
49
Noble, Gavin Thomas. "Modelling glycocluster effects using artificial lipid rafts." Thesis, University of Manchester, 2012. https://www.research.manchester.ac.uk/portal/en/theses/modelling-glycocluster-effects-using-artificial-lipid-rafts(10686397-b8ea-473d-ab27-8fc79b4c424b).html.
Full textAbstract:
The interaction of carbohydrates with carbohydrate-binding proteins is key to a multitude of important biological events, such as cell-cell interactions and signal transduction. Carbohydrates are also essential for energy storage and transfer. Binding to the three-dimensional display of carbohydrates at the cell surface (the glycocalyx) is known to play a role in many disease states, such as carbohydrate binding by viruses. Furthermore, changes in the distribution and type of oligosaccharides is known to occur at tumour cell surfaces. The importance of these natural events at the cell membrane surface provided the motivation for their study in a biomimetic environment. Inspired by previous work in the field of carbohydrate-lectin binding and work in the Webb group into mimicry of cellular processes using supramolecular chemistry, vesicular structures of synthetic glycolipids in natural phospholipids were created. Several synthetic glycolipids were synthesised and found to be capable of lateral phase separation in ordered-phase phospholipid bilayers, forming artificial lipid rafts in the bilayer. The glycolipid vesicle systems were used to study the effects of the lateral clustering of glycolipids on two different biochemical events at the membrane surface: Binding of mannosyl-lipids by concanavalin A (ConA) and the enzymatic galactosylation of N-acetylglucosamine (GlcNAc)-lipids by bovine β-(1,4)-galactosyltransferase (β4GalT1). Fluorescence quenching titrations revealed that clustering of mannosyl-lipids had little effect on the strength of ConA binding. However, HPLC measurements showed that lateral clustering of GlcNAc-lipids could enhance their enzymatic galactosylation by β4GalT1. The work presented in this thesis represents the formulation of these vesicle systems and their study with ConA and β4GalT1. Further investigation with other phase-separating glycolipid-lectin/enzyme pairs is necessary to establish whether the effects of clustering observed herein are exclusive to ConA and β4GalT1, or are general phenomena observed at the membrane surface.
50
Russum, James. "Controlled Radical Polymerizations in Miniemulsions: Advances in the Use of RAFT." Diss., Available online, Georgia Institute of Technology, 2005, 2005. http://etd.gatech.edu/theses/available/etd-10112005-105314/.
Full textAbstract:
Thesis (Ph. D.)--Chemical and Biomolecular Engineering, Georgia Institute of Technology, 2006.Jones, Christopher, Committee Chair ; Schork, F. Joseph, Committee Co-Chair ; Weck, Marcus, Committee Member ; Meredith, Carson, Committee Member ; Agrawal, Pradeep, Committee Member.