Log in

Relevant bibliographies by topics / R1233zd(E) / Journal articles

Journal articles on the topic 'R1233zd(E)'

To see the other types of publications on this topic, follow the link: R1233zd(E).

Author: Grafiati

Published: 10 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'R1233zd(E).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Li, Shengyu, and Jun Lu. "A Theoretical Comparative Study of Vapor-Compression Refrigeration Cycle using Al2O3 Nanoparticle with Low-GWP Refrigerants." Entropy 24, no. 12 (December 13, 2022): 1820. http://dx.doi.org/10.3390/e24121820.

Full text

Abstract:

Nanorefrigerant is a mixture of nanoparticles and pure refrigerant, which can increase heat transfer characteristics in refrigeration and air conditioning equipment. The performance of four different Al2O3 nanorefrigerants and their pure fluids (R600a, R134a, R1234yf, and R1233zd(E)) is analyzed in a vapor-compression refrigeration cycle. The enthalpy of a nanorefrigerant in the refrigeration cycle is calculated by using the prediction method based on the density of nanorefrigerant. A numerical model is established for the thermodynamic analysis, and the results show that adding nanoparticles to the pure refrigerant enhances heat transfer in heat exchangers, increases cooling capacity, reduces compressor power consumption, and finally improves the performance of the refrigeration system. The COP improvement of R1233zd(E) + Al2O3 nanorefrigerant is the highest, and the COP improvement of R134a + Al2O3 and R1234yf + Al2O3 are close to each other. When the mass fraction of Al2O3 nanoparticles increases to 0.30%, the COP of R1233zd(E) and R600a increases by more than 20%; the maximum exergy efficiency is 38.46% for R1233zd(E) + Al2O3, and the minimum exergy efficiency is 27.06% for pure R1234yf. The results provide a basis for the application of nanorefrigerants in the vapor compression refrigeration cycle.

APA, Harvard, Vancouver, ISO, and other styles

2

Liu, Yu, and Xiaoming Zhao. "Measurement of the heat capacity of R1233zd(E)." International Journal of Refrigeration 86 (February 2018): 127–32. http://dx.doi.org/10.1016/j.ijrefrig.2017.11.015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lee, Keon Hu, Seok Ho Yoon, Chan Ho Song, Ook Joong Kim, and Dong Ho Kim. "An Experimental Study on Material Compatibility of R1233zd(E) with Lubricant/Polymers." Korean Journal of Air-Conditioning and Refrigeration Engineering 31, no. 11 (November 30, 2019): 497–505. http://dx.doi.org/10.6110/kjacr.2019.31.11.497.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Racovitza, Alexandru, Horatiu Pop, Valentin Apostol, Tudor Prisecaru, and Daniel Taban. "Comparison between Organic Working Fluids in order to Improve Waste Heat Recovery from Internal Combustion Engines by means of Rankine Cycle Systems." Revista de Chimie 71, no. 1 (February 7, 2020): 113–21. http://dx.doi.org/10.37358/rc.20.1.7821.

Full text

Abstract:

The present works deals with waste heat recovery from internal combustion engines using Rankine cycle systems where working fluid are organic liquids (ORC). The first part of the paper presents the ORC technology as one of the most suitable procedure for waste heat recovery from exhaust gas of internal combustion engine (ICE). The particular engine considered in the present work is a turbocharged compression ignition engine mounted on an experimental setup. The working fluids for ORC system are: isobutene, propane, RE245fa2, RE245cb2, R245fa, R236fa, R365mfc, R1233zd(E), R1234yf and R1234ze(Z). Experimental data derived from the experimental setup has been used for 40%, 55% and 70% engine load. This papers focusses on superheating increment, on thermal efficiency and on net power output, obtained with each working fluids in Rankine cycle. Results point out the superheating increment that gives the highest thermal efficiency for each working fluid. The highest thermal efficiency is achieved in case of using R1233zd(E) as working fluid. In case of using R1233zd(E) as working fluid at 40 % load of the engine, the output power of the Rankine cycle is 3.6 kW representing 6.2 %, from the rated power at this load; at 55% load it is 5.7 kW representing 6.7 % the rated power and at 70% it is 6.7 kW representing 6.5 % from the rated power. Future perspectives are given.

APA, Harvard, Vancouver, ISO, and other styles

5

Elbarghthi, Anas F. A., Mohammad Yousef Hdaib, and Václav Dvořák. "Heat Transfer Analysis between R744 and HFOs inside Plate Heat Exchangers." Entropy 24, no. 8 (August 18, 2022): 1150. http://dx.doi.org/10.3390/e24081150.

Full text

Abstract:

Plate heat exchangers (PHE) are used for a wide range of applications, thus utilizing new and unique heat sources is of crucial importance. R744 has a low critical temperature, which makes its thermophysical properties variation smoother than other supercritical fluids. As a result, it can be used as a reliable hot stream for PHE, particularly at high temperatures. The local design approach was constructed via MATLAB integrated with the NIST database for real gases. Recently produced HFOs (R1234yf, R1234ze(E), R1234ze(Z), and R1233zd(E)) were utilized as cold fluids flowing through three phases: Liquid-phase, two-phase, and gas-phase. A two-step study was performed to examine the following parameters: Heat transfer coefficients, pressure drop, and effectiveness. In the first step, these parameters were analyzed with a variable number of plates to determine a suitable number for the next step. Then, the effects of hot stream pressure and cold stream superheating difference were investigated with variable cold channel mass fluxes. For the first step, the results showed insignificant differences in the investigated parameters for the number of plates higher than 40. Meanwhile, the second step showed that increasing the hot stream pressure from 10 to 12 MPa enhanced the two-phase convection coefficients by 17%, 23%, 75%, and 50% for R1234yf, R1234ze(E), R1234ze(Z), and R1233zd(E), respectively. In contrast, increasing the cold stream superheating temperature difference from 5 K to 20 reduced the two-phase convection coefficients by 14%, 16%, 53%, and 26% for R1234yf, R1234ze(E), R1234ze(Z), and R1233zd(E), respectively. Therefore, the R744 is suitable for PHE as a driving heat source, particularly at higher R744 inlet pressure and low cold stream superheating difference.

APA, Harvard, Vancouver, ISO, and other styles

6

Tsvetkov, O. B., V. V. Mitropov, A. O. Prostorova, and Yu A. laptev. "Thermal conductivity prediction of Trans-1-Chloro-3,3,3-Trifluoropropene (R1233zd (E))." Journal of Physics: Conference Series 1683 (December 2020): 032021. http://dx.doi.org/10.1088/1742-6596/1683/3/032021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Righetti, Giulia, Giovanni A. Longo, Claudio Zilio, Ryo Akasaka, and Simone Mancin. "R1233zd(E) flow boiling inside a 4.3 mm ID microfin tube." International Journal of Refrigeration 91 (July 2018): 69–79. http://dx.doi.org/10.1016/j.ijrefrig.2018.04.020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

He, Jiacheng, Chaobin Dang, and Eiji Hihara. "Supercritical heat transfer characteristics of R1233zd(E) in vertically upward flow." International Journal of Heat and Mass Transfer 127 (December 2018): 497–505. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.07.078.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kedzierski, M. A., and L. Lin. "Pool boiling of R515A, R1234ze(E), and R1233zd(E) on a reentrant cavity surface." International Journal of Heat and Mass Transfer 161 (November 2020): 120252. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2020.120252.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kondou, Chieko, Ryuichi Nagata, Noriko Nii, Shigeru Koyama, and Yukihiro Higashi. "Surface tension of low GWP refrigerants R1243zf, R1234ze(Z), and R1233zd(E)." International Journal of Refrigeration 53 (May 2015): 80–89. http://dx.doi.org/10.1016/j.ijrefrig.2015.01.005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Wang, Tao, Xiangyang Liu, Maogang He, and Ying Zhang. "Molecular dynamics simulation of thermophysical properties and condensation process of R1233zd(E)." International Journal of Refrigeration 112 (April 2020): 341–47. http://dx.doi.org/10.1016/j.ijrefrig.2019.12.029.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Matuszewska, Dominika, and Piotr Olczak. "Evaluation of Using Gas Turbine to Increase Efficiency of the Organic Rankine Cycle (ORC)." Energies 13, no. 6 (March 22, 2020): 1499. http://dx.doi.org/10.3390/en13061499.

Full text

Abstract:

Power conversion systems based on the Organic Rankine Cycle (ORC) have been identified as a potential technology especially in converting low-grade renewable sources or waste heat. However, it is necessary to improve efficiency of ORC systems. This paper focuses on use of low geothermal resources (for temperature range of 80–128 °C and mass flow 100 kg/s) by using modified ORC. A modification of conventional binary power plant is conducted by combining gas turbines to increase quality of steam from a geothermal well. An analysis has been conducted for three different working fluids: R245fa, R1233zd(E) and R600. The paper discusses the impact of parameter changes not only on system efficiency but on other performance indicators. The results were compared with a conventional geothermal Organic Rankine Cycle (ORC). Increasing of geothermal steam quality by supplying exhaust gas from a gas turbine to the installation has a positive effect on the system efficiency and power. The highest efficiency of the modified ORC system has been obtained for R1233zd(E) as a working fluid and it reaches values from 12.21% to 19.20% (depending on the temperature of the geothermal brine). In comparison, an ORC system without gas turbine support reaches values from 9.43% to 17.54%.

APA, Harvard, Vancouver, ISO, and other styles

13

Jeon, Dong-Soon, and Ji-Woon Ko. "An Analysis of Distribution Characteristics According to at Falling Film Type Condenser by Shape of Distribution Plate for R1233zd(E) Refrigerant Gas." KSFM Journal of Fluid Machinery 25, no. 1 (February 28, 2022): 36–42. http://dx.doi.org/10.5293/kfma.2022.25.1.036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Li, Da, Qiang Sun, Ke Sun, Guodong Zhang, Shuzhan Bai, and Guoxiang Li. "Diesel engine waste heat recovery system comprehensive optimization based on system and heat exchanger simulation." Open Physics 19, no. 1 (January 1, 2021): 331–40. http://dx.doi.org/10.1515/phys-2021-0039.

Full text

Abstract:

Abstract To further improve the thermal efficiency of diesel engines, a waste heat recovery system model utilizing organic Rankine cycle (ORC) is constructed and verified through system bench test and heat exchanger bench test. To recover waste heat from diesel engine exhaust, ethanol, cyclopentane, cyclohexane, R1233zd (E), and R245fa were selected for comparison. The quality of heat source, the quality of evaporator, the system output, and the system complicity were taken as variables for comparison. Analysis shows that for ORC systems without recuperator, ethanol system has the best system output of the five in a wide operation temper range, with the highest exergy efficiency of 24.1%, yet the exergy efficiency increase after the application of recuperator, 9.0%, is limited. For low temperature exhaust, cyclopentane system has the best performance with or without recuperator, and the cyclopentane system with recuperator has the best performance in terms of exergy efficiency, 27.6%, though complex heat exchangers are also required for high power output. The system output of the R1233zd system is better than the R245fa system, yet the advantage of low evaporate temperature can be better utilized for low quality waste heat recovery.

APA, Harvard, Vancouver, ISO, and other styles

15

Huang, Xiaohui, Ji Zhang, and Fredrik Haglind. "Experimental analysis of hydrofluoroolefin zeotropic mixture R1234ze(E)/R1233zd(E) condensation in a plate heat exchanger." International Communications in Heat and Mass Transfer 135 (June 2022): 106073. http://dx.doi.org/10.1016/j.icheatmasstransfer.2022.106073.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Di Nicola, Giovanni, Laura Fedele, J. Steven Brown, Sergio Bobbo, and Gianluca Coccia. "Saturated Pressure Measurements of trans-1-Chloro-3,3,3-trifluoroprop-1-ene (R1233zd(E))." Journal of Chemical & Engineering Data 62, no. 9 (February 15, 2017): 2496–500. http://dx.doi.org/10.1021/acs.jced.6b00916.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Talluri, Lorenzo, Olivier Dumont, Giampaolo Manfrida, Vincent Lemort, and Daniele Fiaschi. "Experimental investigation of an Organic Rankine Cycle Tesla turbine working with R1233zd(E)." Applied Thermal Engineering 174 (June 2020): 115293. http://dx.doi.org/10.1016/j.applthermaleng.2020.115293.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

You, Xin Yu, Jiong Hui Liu, Nan Hua, Ji Wang, Rong Ji Xu, Guang Xu Yu, and Hua Sheng Wang. "Experimental study on flow boiling of refrigerant R1233zd(E) in microchannels: Heat transfer." Applied Thermal Engineering 182 (January 2021): 116083. http://dx.doi.org/10.1016/j.applthermaleng.2020.116083.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Ju, Fujun, Xiaowei Fan, Yaping Chen, Honglin Zhang, Tuanjie Wang, and Xiangyang Tang. "Performance assessment of heat pump water heaters with R1233zd(E)/HCs binary mixtures." Applied Thermal Engineering 123 (August 2017): 1345–55. http://dx.doi.org/10.1016/j.applthermaleng.2017.05.137.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Lyu, Long, Wu Chen, Ankang Kan, Yuan Zhang, Song Xue, and Jingbin Zeng. "Investigation of a Dual-Loop ORC for the Waste Heat Recovery of a Marine Main Engine." Energies 15, no. 22 (November 9, 2022): 8365. http://dx.doi.org/10.3390/en15228365.

Full text

Abstract:

As carbon dioxide emissions arising from fossil energy consumption and fossil fuels are gradually increased, it is important for the low-carbon operation of ships to recover diesel engine waste heat. A newly developed dual-loop organic Rankine cycle (ORC) system to recover waste heat from a marine main engine (M/E) was designed in this paper. The exhaust gas (EG) heat was recovered by the high-temperature (HT) loop. The jacket cooling water (JCW) heat and the condensation heat of the HT loop were recovered by the low-temperature (LT) loop. Toluene, cyclohexane, benzene, R1233zd (E), R245fa, and R227ea were selected as the working fluids. The influence of the condenser thermal parameters on the LT loop was analyzed using the pinch point method. The performance of the dual-loop ORC was investigated under various working fluid combinations. The maximum net power of the HT loop can reach 253.4 kW when using cyclohexane as the working fluid, and the maximum thermal efficiency of the HT loop can reach 18.5% with benzene as the working fluid. Meanwhile, higher condensation temperatures and levels of condensation heat of the HT loop have a positive effect on the performance of the LT loop. However, in most conditions, the HT loop condensation heat could not provide enough heat for the LT loop’s working fluid to start the boiling process. The total net power of the dual-loop ORC system was 410.6 kW with Cyclohexane in the HT loop and R1233zd (E) in the LT loop, resulting in a 10.9% improvement in the marine main engine thermal efficiency.

APA, Harvard, Vancouver, ISO, and other styles

21

Mariani, Antonio, Biagio Morrone, Davide Laiso, Maria Vittoria Prati, and Andrea Unich. "Waste Heat Recovery in a Compression Ignition Engine for Marine Application Using a Rankine Cycle Operating with an Innovative Organic Working Fluid." Energies 15, no. 21 (October 25, 2022): 7912. http://dx.doi.org/10.3390/en15217912.

Full text

Abstract:

The exhaust heat of energy conversion systems can be usefully recovered by Organic Rankine Cycles (ORC) instead of wasting it into the environment, with benefits in terms of system efficiency and environmental impact. Rankine cycle technology, consolidated in stationary power plants, has not yet spread out into transport applications due to the layout limitations and to the necessity of containing the size and weight of the ORC system. The authors investigated an ORC system bottoming a compression ignition engine for marine application. The exhaust mass flow rate and temperature, measured at different engine loads, have been used as inputs for modeling the ORC plant in a Simulink environment. An energy and exergy analysis of the ORC was performed, as well as the evaluation of the ORC power at different engine loads. Two different working fluids were considered: R1233zd(e), an innovative fluid belonging to the class of hydrofluoroolefin, still in development but interesting due to its low flammability, health hazard, and environmental impact, and R601, a hydrocarbon showing a benchmark thermodynamic performance but highly flammable, considered as a reference for comparison. Three plant configurations were investigated: single-pressure, dual-pressure, and reheating. The results demonstrated that the dual-pressure configuration achieves the highest exploitation of exhaust heat. R1233zd(e) produced an additional mechanical power of 8.0% with respect to the engine power output, while, for R601, the relative contribution of the ORC power was 8.7%.

APA, Harvard, Vancouver, ISO, and other styles

22

Morales-Espejel, Guillermo E., Ralph Meeuwenoord, Armando Félix Quiñonez, and Rudolf Hauleitner. "Film thickness and traction measurements of refrigerant R1233zd used as lubricant in elastohydrodynamic conditions." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 229, no. 2 (May 7, 2014): 244–53. http://dx.doi.org/10.1177/0954406214533530.

Full text

Abstract:

This study presents film thickness and friction measurements of the refrigerant R1233zd (E-1-chloro-3,3,3,trifluoropropene-1) in a tribological contact. For the film thickness, optical interferometry technique with glass–steel contact is used in a ball-disc configuration, whilst for the traction measurements (Stribeck and traction curves), a contact ceramic ball–steel disc is used. In both cases, the Wedeven Associates Machines-5 tribometer is employed. An attempt to model the film thickness results is also carried out. The model gives a reasonably good prediction with respect to the experiments.

APA, Harvard, Vancouver, ISO, and other styles

23

Chen, Ting, and Oh Kyung Kwon. "Experimental Analyses of Moderately High-Temperature Heat Pump Systems with R245fa and R1233zd(E)." Energy Engineering 119, no. 6 (2022): 2231–42. http://dx.doi.org/10.32604/ee.2022.021289.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Perkins, Richard A., Marcia L. Huber, and Marc J. Assael. "Measurement and Correlation of the Thermal Conductivity oftrans-1-Chloro-3,3,3-trifluoropropene (R1233zd(E))." Journal of Chemical & Engineering Data 62, no. 9 (March 29, 2017): 2659–65. http://dx.doi.org/10.1021/acs.jced.7b00106.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Falbo, Luigi, and Sergio Bova. "Performance analysis of a bio-diesel fired engine bottoming with micro-ORC." Journal of Physics: Conference Series 2385, no. 1 (December 1, 2022): 012116. http://dx.doi.org/10.1088/1742-6596/2385/1/012116.

Full text

Abstract:

Abstract The purpose of this work is to investigate the performance in terms of electric power and electric efficiency of a 11kW bio-diesel internal combustion engine (ICE) coupled with a micro Organic Rankine Cycle (ORC) both in design and off-design conditions. A zero dimensional (0D) thermodynamical engine model has been developed to predict the electric and thermal power with 100% biodiesel fuel (B100). B100 has been selected for the performance analysis of the integrated system due its lower environmental impact. For the ORC system, a subcritical thermodynamic model has been used with various working fluid (R245fa, R1233zd(E), R134a, R1234ze(E) and R1234ze(Z)). A plate heat exchanger (PHEX) has been adopted as evaporator of the organic cycle to directly recover the thermal power of the exhaust gas. Both models have been validated using experimental data from literature. Two different expander configurations, dynamic and volumetric, has been investigated. Model validations show good agreement with the experimental and literature data, respectively. Moreover, the results highlight that the micro-ORC could achieve a maximum electric efficiency of about 7% at full load with R1234ze(Z). Although at part load the dynamic expander show better performance, the volumetric expander has been selected for the system analysis due to its real suitability for small and micro scale ORC. Combined system results show a maximum enhancement of engine efficiency of about 5%, and better results, in terms of good compromise between electric efficiency and operating range width, has been shown for R1233zd(E). Furthermore, the direct coupling of the PHEX with the exhaust gases allows to have heat exchange evaporator areas below 2 m2 for all analysed fluids.

APA, Harvard, Vancouver, ISO, and other styles

26

Ji, Wen-Tao, Shi-Ming Xiong, Li Chen, Chuang-Yao Zhao, and Wen-Quan Tao. "Effect of subsurface tunnel on the nucleate pool boiling heat transfer of R1234ze(E), R1233zd(E) and R134a." International Journal of Refrigeration 122 (February 2021): 122–33. http://dx.doi.org/10.1016/j.ijrefrig.2020.11.002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Ko, Ji-Woon, Dong-Soon Jeon, Young-Lyul Kim, and Seon-Chang Kim. "Experimental study on film condensation heat transfer characteristics of R1234ze(E) and R1233zd(E) over horizontal plain tubes." Journal of Mechanical Science and Technology 32, no. 1 (January 2018): 527–34. http://dx.doi.org/10.1007/s12206-017-1254-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Zhao, Runze, Zikang Zhang, Shuaicheng Zhao, Haichuan Cui, Zhichun Liu, and Wei Liu. "Experimental study of flat-disk loop heat pipe with R1233zd(E) for cooling terrestrial electronics." Applied Thermal Engineering 197 (October 2021): 117385. http://dx.doi.org/10.1016/j.applthermaleng.2021.117385.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Meng, Xianyang, Chenyang Wen, and Jiangtao Wu. "Measurement and correlation of the liquid viscosity of trans-1-chloro-3,3,3-trifluoropropene (R1233zd(E))." Journal of Chemical Thermodynamics 123 (August 2018): 140–45. http://dx.doi.org/10.1016/j.jct.2018.04.001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Yin, Jianguo, Jinjun Ke, Guanjia Zhao, and Suxia Ma. "Experimental vapor pressures and gaseous pvT properties of trans-1-Chloro-3,3,3-trifluoropropene (R1233zd(E))." International Journal of Refrigeration 121 (January 2021): 253–57. http://dx.doi.org/10.1016/j.ijrefrig.2020.09.010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Mahmoudian, Jafar, Federico Mazzelli, Andrea Rocchetti, and Adriano Milazzo. "A heat-powered ejector chiller working with low-GWP fluid R1233zd(E) (Part2: Numerical analysis)." International Journal of Refrigeration 121 (January 2021): 216–27. http://dx.doi.org/10.1016/j.ijrefrig.2020.10.016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Ovsyannik, A. V., and V. P. Kliuchinski. "Thermodynamic Analysis of Ozone-Safe Low Boiling Working Media for Turbo-Expander Plants." ENERGETIKA. Proceedings of CIS higher education institutions and power engineering associations 63, no. 6 (December 2, 2020): 554–62. http://dx.doi.org/10.21122/1029-7448-2020-63-6-554-562.

Full text

Abstract:

The article considers 46 low-boiling working media (LBWM) with zero potential for ozone layer destruction. Out of them, 14 ones are single-component hydrofluorocarbon refrigerants, 28 ones are multi-component mixtures of hydrofluorocarbon refrigerants, and the four ones are native refrigerants. Thermodynamic analysis of working media based on the classical turbo-expander scheme with a heat exchanger designed to cool the superheated LBWM that has left the turbo-expander has been performed. For this scheme, a cycle is constructed in T–s-coordinates. The LBWM was compared using the exergetic coefficient of efficiency (KE). In the course of the study, it was found that for some LBWM, the sequence of location of the exergetic efficiencydependences on temperature at thermodynamically optimal working medium pressures is preserved over the entire temperature range under study (from 100 to 300 оC). In other words,if the working medium has the highest exergetic efficiency coefficient, then this property is inherent in it at any temperature in a given interval. It is proposed to perform the analysis of the LBWM for exergetic efficiency at an arbitrarily selected temperature (250 оC). The study demonstrated that the highest exergetic efficiency of natural refrigerants is R600A (50.25 %), among single component hydrofluorocarbon refrigerants – R245FA (50.00 %), R1233ZD(E) (49.91 %), R236EA (49.59 %), among multi-component mixtures of hydrofluorocarbon refrigerants – R429A (47.92 %), R430A (47.49 %) and R423A (47.47 %). Out of the all examined refrigerants, the following ones have the highest exergetic efficiency of all the considered LBWM: R600A, R245FA, R1233ZD(E), R236EA, R1234ZE(Z), R236FA. They belong to both natural refrigerants (hydrocarbons) and single-component hydrofluorocarbons. It should be noted that each of these working media has its drawbacks: some have a high potential for global warming, others are explosive, and others have a high cost.

APA, Harvard, Vancouver, ISO, and other styles

33

Wu, Linli, Jun Chen, and Shuangfeng Wang. "Experimental study on thermal performance of a pulsating heat pipe using R1233zd(E) as working fluid." International Communications in Heat and Mass Transfer 135 (June 2022): 106152. http://dx.doi.org/10.1016/j.icheatmasstransfer.2022.106152.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Ubara, Tsutomu, Hitoshi Asano, and Katsumi Sugimoto. "Falling film evaporation and pool boiling heat transfer of R1233zd(E) on thermal spray coated tube." Applied Thermal Engineering 196 (September 2021): 117329. http://dx.doi.org/10.1016/j.applthermaleng.2021.117329.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Mahmoudian, Jafar, Andrea Rocchetti, Federico Mazzelli, and Adriano Milazzo. "A heat-powered ejector chiller working with low-GWP fluid R1233zd(E) (Part 1: Experimental results)." International Journal of Refrigeration 121 (January 2021): 1–9. http://dx.doi.org/10.1016/j.ijrefrig.2020.10.015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Eyerer, Sebastian, Fabian Dawo, Johannes Kaindl, Christoph Wieland, and Hartmut Spliethoff. "Experimental investigation of modern ORC working fluids R1224yd(Z) and R1233zd(E) as replacements for R245fa." Applied Energy 240 (April 2019): 946–63. http://dx.doi.org/10.1016/j.apenergy.2019.02.086.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Xiao, Jiange, and Pega Hrnjak. "Pressure drop of R134a, R32 and R1233zd(E) in diabatic conditions during condensation from superheated vapor." International Journal of Heat and Mass Transfer 122 (July 2018): 442–50. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.01.123.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Zhang, Ji, Martin Ryhl Kærn, Torben Ommen, Brian Elmegaard, and Fredrik Haglind. "Condensation heat transfer and pressure drop characteristics of R134a, R1234ze(E), R245fa and R1233zd(E) in a plate heat exchanger." International Journal of Heat and Mass Transfer 128 (January 2019): 136–49. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.08.124.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Ko, Ji-Woon, and Dong-Soon Jeon. "Experimental study on film condensation heat transfer characteristics of R134a, R1234ze(E) and R1233zd(E) over condensation tube with enhanced surfaces." Heat and Mass Transfer 56, no. 11 (July 17, 2020): 3001–10. http://dx.doi.org/10.1007/s00231-020-02914-w.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Li, Xiaoya, Steven Lecompte, Jera Van Nieuwenhuyse, Kenny Couvreur, Hua Tian, Gequn Shu, Michel De Paepe, and Christos N. Markides. "Experimental investigation of an organic Rankine cycle with liquid-flooded expansion and R1233zd(E) as working fluid." Energy Conversion and Management 234 (April 2021): 113894. http://dx.doi.org/10.1016/j.enconman.2021.113894.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Li, Gang. "Thermo-economic evaluation of R1233zd(E) as an R245fa alternative in organic Rankine cycle for geothermal applications." Korean Journal of Chemical Engineering 38, no. 11 (September 28, 2021): 2195–207. http://dx.doi.org/10.1007/s11814-021-0936-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Welzl, Matthias, Florian Heberle, and Dieter Brüggemann. "Experimental evaluation of nucleate pool boiling heat transfer correlations for R245fa and R1233zd(E) in ORC applications." Renewable Energy 147 (March 2020): 2855–64. http://dx.doi.org/10.1016/j.renene.2018.09.093.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Lillo, G., R. Mastrullo, A. W. Mauro, and L. Viscito. "Flow boiling of R1233zd(E) in a horizontal tube: Experiments, assessment and correlation for asymmetric annular flow." International Journal of Heat and Mass Transfer 129 (February 2019): 547–61. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.09.117.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Mwesigye, A., A. Kiamari, and S. B. Dworkin. "A thermodynamic investigation and optimization of an ejector refrigeration system using R1233zd(E) as a working fluid." IOP Conference Series: Materials Science and Engineering 609 (October 23, 2019): 052011. http://dx.doi.org/10.1088/1757-899x/609/5/052011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Nagata, Ryuichi, Chieko Kondou, and Shigeru Koyama. "Comparative assessment of condensation and pool boiling heat transfer on horizontal plain single tubes for R1234ze(E), R1234ze(Z), and R1233zd(E)." International Journal of Refrigeration 63 (March 2016): 157–70. http://dx.doi.org/10.1016/j.ijrefrig.2015.11.002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

UBARA, Tsutomu, Katsumi SUGIMOTO, and Hitoshi ASANO. "Film thickness and heat transfer characteristics of R1233zd(E) falling film with nucleate boiling on an inclined plate." International Journal of Heat and Mass Transfer 198 (December 2022): 123423. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2022.123423.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

KolobaevViktor, A., Sergey V. Rykov, Irina V. Kudryavtseva, Evgeniy E. Ustyuzhanin, Peter V. Popov, Vladimir A. Rykov, and Aleksandr D. Kozlov. "Thermodynamic properties of R1233zd(E) refrigerant: a technique for constructing the fundamental equation of state and tabulated data." Izmeritel`naya Tekhnika, no. 5 (2022): 22–28. http://dx.doi.org/10.32446/0368-1025it.2022-5-22-28.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

KolobaevViktor, A., Sergey V. Rykov, Irina V. Kudryavtseva, Evgeniy E. Ustyuzhanin, Peter V. Popov, Vladimir A. Rykov, and Aleksandr D. Kozlov. "Thermodynamic properties of R1233zd(E) refrigerant: a technique for constructing the fundamental equation of state and tabulated data." Izmeritel`naya Tekhnika, no. 5 (2022): 22–28. http://dx.doi.org/10.32446/0368-1025it.2022-5-22-28.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Fedele, Laura, Mariano Pierantozzi, Giovanni Di Nicola, J. Steven Brown, and Sergio Bobbo. "Compressed Liquid Density and Vapor Phase PvT Measurements of trans-1-Chloro-3,3,3-trifluoroprop-1-ene [R1233zd(E)]." Journal of Chemical & Engineering Data 63, no. 1 (December 22, 2017): 225–32. http://dx.doi.org/10.1021/acs.jced.7b00841.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Welzl, Matthias, Florian Heberle, and Dieter Brüggemann. "Simultaneous experimental investigation of nucleate boiling heat transfer and power output in ORC using R245fa and R1233zd(E)." Energy Procedia 129 (September 2017): 435–42. http://dx.doi.org/10.1016/j.egypro.2017.09.113.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!